Commit Graph
17 Commits
Author SHA1 Message Date
chasse20 85e0bf9247 Add parameter-owned function graphs 2026-11-10 04:07:54 -05:00
ljkx 3cf1262c8d Graph: pull a wire from an unconnected input
Pressing an unconnected input and dragging now pulls a wire out of it,
and dropping it on another node's output connects the two, in the
material graph and in the function graph editor. Dropped anywhere else,
nothing changes. #53 added this to the material graph, but it was lost
when the canvas was rebuilt as the graph/ module.

Fixes #13
2026-11-09 06:12:55 +01:00
chasse20 a0032d6ac2 Add SBS function library and Explorer graph editing 2026-11-08 17:25:08 -05:00
chasse20 2adbdf4aab Merge main while preserving native graph architecture 2026-11-06 00:58:56 -05:00
chasse20 d318484b41 Checkpoint native SBS primitive workflow
Replace the legacy Rust procedural library with clean-room native primitives, typed function execution and FX-Map graphs. Save supported content as native SBS and organize the model, evaluators, codecs and editors into focused modules.

Add shared graph editing behavior, flat filtered node menus, frame and comment editing, named Explorer outputs and an original atomic sample. Document the tested scope and remaining interoperability work.
2026-11-05 18:23:06 -05:00
FredApps 56407b9470 Revert the batch rollback and restore prior main 2026-11-05 22:04:58 +01:00
Rafael Mendes a7b9194820 Revert reviewed PR batch and cancel 0.1.3 preparation
Restore tracked files to 91bb53f07a, immediately before the batch, at the maintainer request. Preserve the existing history and earlier work, including PR #38. Revert the 50 reviewed PR merges and the version bump in 441092c. The published 0.1.2 release is unchanged.
2026-11-05 17:48:14 -03:00
PiJellyPin 8bdae1157d Fixed Heightmap 2026-11-05 02:38:04 +01:00
Rafael Mendes 2900eb1058 Merge branch 'feat/alpha-3d-and-wire-editing' into feat/levels-histogram
# Conflicts:
#	crates/ui-egui/tests/snapshot.rs
2026-11-04 20:14:36 -03:00
Rafael MendesandClaude Opus 5.5 934c227774 feat(levels): histogram editor in the properties panel
Selecting a Levels node now shows a visual editor above its sliders: a
histogram of the node's input (256 bins; red, green and blue overlaid for a
color input; scaled to the tallest bin between pure black and white) with
the clipped ranges shaded and the levels transfer curve on top, draggable
input low/mid/high handles under it and output low/high handles under a
black-to-white bar.

Fixes in how Levels is edited: Level in mid is relative to the input range,
and its handle now sits where it acts and moves with the range; the input
low and high handles cannot cross. Parameters bound to inputs or driven by
functions keep their handles locked. Every drag is a graph.node.param
command, one undo step per handle. levels_fn no longer propagates NaN.

Tests cover the histogram, the handle constraints and the remap math; the
snapshots UI test renders the editor. Documented in docs/levels-editor.md.

Clean-room implementation.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 15:03:08 -03:00
Rafael MendesandClaude Opus 5.5 29dee321d9 feat(graph): select several wires and swap their sources with X
Shift+click adds a wire to the selection and Ctrl+click toggles it. With two
or more wires selected, X swaps where they come from: two wires trade
sources, more reverse them in target-node and input order, so selecting a
Blend node's foreground and background wires and pressing X swaps the two
layers. The wires stay selected, so X again swaps back. Delete and
Backspace remove every selected wire in one undo step, and the wire menu
gains Swap selected links and Delete selected links.

New commands graph.wire.swap and graph.wire.delete take
{wires: [{to, toPort}, ...]}; a swap that would make a cycle is refused and
changes nothing. Engine and UI tests (real clicks on a Blend node) cover
both; docs/wires-and-alpha.md documents the gestures, the ordering rule and
the commands.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 14:43:32 -03:00
Rafael MendesandClaude Opus 5.5 8f4dd5b6c1 feat: alpha in the 3D view; select, delete and reroute wires
3D view: the material's alpha (the Opacity output, else the Base color's
alpha channel) now makes the mesh see-through. Rays composite front to back
through up to eight transparent layers and back faces shade toward the
viewer, so the inside of a cut-out mesh and the environment show through.
view.3d takes `transparency` (default on) and `alphaView`; the Display menu
and a bottom-bar button toggle an unlit view of the alpha channel.

Graph editor: click a wire to select it (Delete or Backspace removes it),
drag a wire to pull a reroute Dot out of it, double-click a wire to drop a
Dot there, right-click a wire for Insert reroute dot and Delete link. The
new graph.wire.insertDot command splits a wire with a Dot in one undo step.

Docs: docs/wires-and-alpha.md (gestures, commands, rendering, tests) with
two snapshot screenshots, plus architecture, parity, control protocol,
README and ATTRIBUTION updates.

Clean-room implementation.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 14:32:48 -03:00
ljkx f8f8d8c2c0 3D view: make the pan limit and speed preferences
Review: no hardcoded limit. The two MAX_TARGET constants are gone.

- Engine: CameraPrefs { pan_limit, pan_speed } with the defaults in one
  place (Default: 5 mesh radii, speed 1), sanitized against NaN and
  negative values. Session::set_camera_prefs stores them and pulls the
  orbit target back inside a lowered limit; view.3d clamps targets to it;
  session.inspect shows it.
- App: Prefs.camera persists with the other preferences (older saved
  preferences load the defaults), apply_prefs pushes it into the session,
  and Edit > Preferences has "3D pan limit" and "3D pan speed" sliders.
  The drag uses the pan speed.
- Renderer: no limit of its own. camera() falls back to the scene center
  for a non-finite target and pan() returns the unbounded offset.
2026-11-03 00:28:44 +01:00
ljkx f786a2d4c3 3D view: pan the camera with Alt+drag or middle-drag
The 3D view could only orbit around the mesh center and zoom, so there was
no way to look at an off-center part of a mesh up close.

- View3d gains `target`, the orbit point's offset from the mesh center in
  mesh radii (world axes, so orbiting after a pan turns around the new
  point). `view.3d {target: [x, y, z]}` sets it, validated before anything
  changes and clamped to 5 radii; view.3d.reset clears it.
- The renderer orbits around the offset target, and `pan` turns a drag
  (in view heights) into a new target so the mesh follows the pointer.
- Alt+drag or middle-drag pans in the 3D view, like the graph. Double-click
  and the Camera presets recenter. The headless render honours the target.
2026-11-02 20:30:01 +01:00
bflatasticandClaude Opus 5.5 53ab0f2d6a Cross-app materials: .mcmat portable materials for TextureCraft
- formats: .mcmat (zip: material.json manifest, maps/<usage>.png, source.mcraft) with
  read/write and caps; color usages 8-bit sRGB, data maps 16-bit linear
- engine: file.exportMaterial {path, size?, values?, inputs?}, file.sendToTextureCraft
  (TextureCraft's library folder), graph.input.bind/unbind; file.open reads .mcmat
- core/eval: Graph::input_images preview images for input nodes (mesh maps from
  TextureCraft); caller images win; grayscale inputs convert to gray
- ui: File > Export material..., File > Send to TextureCraft, Open accepts .mcmat,
  input previews in the graph properties
- docs: control protocol (portable materials), file formats, gaps, parity ≈ 67%,
  roadmap, architecture, AGENTS convention for shared formats

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 12:06:09 +07:00
bflatasticandClaude Opus 5.5 6e2d3932ab Docs: parity ≈ 66%, re-ranked gaps, new commands and CLI --set
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 05:08:27 +07:00
bflatasticandClaude Opus 5.5 54fc5b9571 README, AGENTS, ATTRIBUTION, roadmap and docs; web app; icons
The README in the Crafting Apps frame with real screenshots and renders made
by MaterialCraft, the agent guide with the asset and clean-room rules, the
attribution list, the parity assessment, gaps, roadmap, architecture,
control protocol, localization and file format docs. Adds the browser build
(trunk), the .ico/.icns icons and centers the 3D camera on the mesh bounds.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 04:04:13 +07:00