With an effect selected, Delete removed its whole layer and Ctrl+D
duplicated the layer. Both now act on the effect, like the clipboard
shortcuts; effect commands default to the selected effect.
An effect's context menu copies, cuts and pastes it, and Ctrl+C,
Ctrl+X and Ctrl+V act on a selected effect (pasting a copied one above
the selected effect, or on top of the selected content or mask).
Painted strokes come along, resampled to the target set; generators
and other one-stack effects go to their stack, and a fill reading an
anchor point needs one below its new layer. effect.copy, effect.cut
and effect.paste share the layer clipboard.
The History panel lists every undone step too (dimmed, next first) and
a click on any step goes back or forward to it, the current one
highlighted. edit.undo and edit.redo take {steps?} for the same jump.
Undoing an effect's add or duplicate took the selected effect away and
left the selection on it, so the row lost its highlight and strokes had
no target. The selection now falls back to the stack the effect was in.
Each mesh map slot of the Texture Set Settings takes an image resource:
drop one from the Assets panel on the slot, or pick it from the slot's
menu, which also clears the slot. The image is resampled to the size of
the set's other mesh maps (or its bake size), its values read as data,
a normal map in the project's normal format.
textureSet.meshMap.set {ts?, map, image} and
textureSet.meshMap.clear {ts?, map} give agents the same.
Effect rows in the layer stack can be dragged within their stack (a
drop lands above the row, or below it from its lower half), and their
context menu duplicates an effect just above itself, painted pixels
included. effect.move {effect, index} and effect.duplicate {effect}
give agents the same.
Nine procedural materials for the shelf: three metals from measured
reflectance (zinc with crystalline spangles), bark with deep furrows,
fine-grained sand, mud with glossy wet patches, ice with cloudy air
pockets under transmission, and snow and bone with a little subsurface
scattering.
A neighbourhood field covers the bounding box of its tiles, and a
scattered sample spans the whole set, so on an 8K set a blur below the
levels effect evaluated everything. With such a filter below, each
sampled tile now builds its own field.
Three adjustment filters for masks and content: Histogram Scan slides a
ramp through the values (contrast narrows it to a step), Histogram Range
squeezes them towards a position, and Histogram Shift offsets them with
wrap-around. Names and parameters are translated into all nine other UI
languages.
An odd tile stride: a power of two divides the row length on
power-of-two sets and read the same few columns. A mask is planned on
its own, so a paint layer with nothing painted still shows its mask's
histogram.
The Levels effect's properties now show a histogram of its input, the
mask below it or (on layer content) a channel picked above it, with the
input range marked. effect.histogram {effect, channel?, bins?} gives
agents the same counts. Large sets are sampled (at most 256 tiles), so
the cost stays flat up to 8K.
UV island fill grew the island through shared vertex indices. Imported
meshes often split vertices along hard edges, or give every face its
own, while the UVs run on; the fill then stopped at single polygons.
Triangles that share an edge in UV space now form the island.
Fixes#51.
Carbon Fiber, Fabric Cotton, Denim and Velvet were all the same plain
weave in different colours. A new Twill weave pattern (2/2: diagonal
ribs, the weft darker than the warp) now gives Denim its diagonal and
Carbon Fiber its light and dark tows under a clear coat; Velvet is a
soft pile with no weave under its sheen; Fabric Cotton keeps the plain
weave. Twill weave is also a fill pattern, translated into all nine
other UI languages.
Fixes#97.
An eye menu above the list shows, hides or inverts every texture set;
the focus button shows only the active one, and shows them all again
when pressed a second time. textureSet.visibility {mode} does the same
for agents.
Fixes#72.
Alt+click on a channel of a fill's or the brush's Material section turns
that channel on and every other one off (one undo step for a fill).
tool.material and layer.fill.set take solo: true for the same.
Fixes#74.
Parts a mesh file leaves unnamed are named after the file. The project
stored the mesh as mesh.<ext> and read it back under that name, so a
reopened quad.gltf named its part "mesh" and geometry masks on "quad"
hid their layer. The project now keeps the imported file's name
(mesh_file) and reads the stored mesh under it, on open and on a
pathless reimport. Older projects read as before.
Fixes#76.
layer.add.decal and layer.decal.set take up: [x, y, z]. Without it the
decal keeps the view's up, and when that runs along the surface normal
(a top face seen from a level camera) it takes the view direction, so
the far edge is up, instead of an arbitrary perpendicular.
Fixes#64.
Thickness is the mean hit distance divided by the max occluder distance,
so the old shared default of 0.25 of the bounding box diagonal turned most
thin parts of a model nearly black, and long rays reached geometry behind
single-sided parts. 0.1 is the default in Adobe's public baker documentation.
AO and bent normals keep 0.25.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Assets shelf has a Brushes tab: presets grouped as Basic (hard, soft,
airbrush, square, dots), Wear and grunge (dry brush, chalk, spray, grunge,
splatter, scratches, chips, cracks, drips) and Details (stars, stitches,
rivets, fur), each with a preview of its stroke. A click sets the stroke (alpha,
spacing, flow, hardness, angle, path following, jitters, particles) and keeps
the brush's size, alignment, culling, symmetry and lazy mouse. My brushes saves
the current brush as a .tcbrush file in the brushes folder and lists them.
Commands: brush.preset.list, brush.preset.apply {preset}, brush.preset.save
{path} and brush.preset.load {path} (an image alpha from another project is
dropped). Labels translated into the other nine UI languages.
resource.text draws one or more lines of text, shaped with harfrust (kerning,
ligatures, joined scripts) from the font's outlines (skrifa) and filled by a
non-zero scanline rasterizer, cropped to the ink, as an image resource: white
for the brush alpha, or a color for a decal. text.fonts lists the installed
families and styles, read from each font file's name table only (246 families in
80 ms here); Ubuntu Light and Hack from the UI's built-in fonts are always there
and are the fallback in the browser.
- Properties > Alpha > Text: the text, a font and style, Use as brush alpha and
Place as decal (in the tool's base color).
- Image alphas keep their proportions (their longer side spans the stamp), so a
line of text stays a line; image thumbnails are letterboxed and show alpha.
- harfrust 0.12 and skrifa 0.44 are the versions egui already builds, so the
lockfile gains no packages.
Fixes#40
Previously, r.request_focus() was called unconditionally on every
frame inside the layer rename editor, which continually wiped out
r.lost_focus() in egui's memory and trapped keyboard focus inside
the text edit. As a result, clicking outside never exited rename mode,
Enter was unhandled, and keyboard shortcuts including Undo (Ctrl+Z)
were permanently suppressed by egui_wants_keyboard_input.
- Request focus via widget ID once when renaming starts instead of every frame
- Submit and close rename mode on Enter or when focus is lost
- Cancel without saving on Escape
- Prevent row double-clicks, row clicks, and drag-and-drop from interfering with active text editing
- Add regression test in session.rs verifying layer.rename and edit.undo
Fixes#39
Colors near a chosen color shift towards a new one, keeping their shading and texture.
27 -> 28 library filters.
- Filter::ReplaceColor {from, to, tolerance, softness}: each color within the tolerance (RGB
distance 0..1) moves by to - from, fading out over the softness (smoothstep); far colors and
scalar channels are untouched; content only (Adjustments)
- effect.add.filter / effect.set take from and to as linear RGB or "#rrggbb"; Properties has a
swatch per color and the two sliders; translations in all eight UI languages
- tests: near, far and halfway colors, scalars; the engine filter library test adds it
48 -> 54 procedural materials on the shelf and through material.apply:
- Rust (Metal): pitted, blotchy orange-brown iron oxide, a rough dielectric
- Slate, Sandstone, Terrazzo (Stone & Masonry): layered dark stone, fine warm grains, pale
binder with polished stone chips
- Cork and Paper (Organic): granular pored cork, off-white paper with a faint tooth
The existing test applies every material on the sample and checks it changes the composite;
each was also checked on the material ball.
A Geometry mask tool (key 8) shows or hides the selected layer on the mesh part under a click,
so geometry masks can be set on the model instead of from the part list.
- Tool::GeometryMask; tool.geometryMask selects it and tool.click toggles the part under the
point ({layer, part, shown, geometryMask}); showing every part again clears the mask; one
undo step per click; refused on empty space, without a selected layer, or on a part of
another texture set
- the tool shelf, the tool bar hint and Properties (the layer's parts, shown or hidden, and Show
on all parts); the hint is translated in all eight UI languages
- test: clicks on a two-object OBJ hide, show and clear, undo, and a click on empty space
Strokes can repeat around an axis through the mesh center, 2 to 32 copies, on their own or with
the X/Y/Z mirrors (each mirror is spread too).
- Symmetry gains radial (copies) and axis (X/Y/Z, default Y), serde defaults; sanitized clamps
- symmetry copies are marked and paint where symmetry puts them: the camera visibility and
back-face tests apply to the stroke itself only, so copies on the far side of the model paint
(mirror Z included); they still only paint surfaces facing the copy
- tool.brush {symmetryRadial, symmetryAxis}, shown in its result as radialSymmetry; Properties >
Lazy mouse and symmetry: Radial copies slider and axis; translations in all eight languages
- tests: copies a quarter turn apart, with mirrors, clamping; an engine stroke paints the back of
a sphere through radial symmetry
17 -> 21 smart materials on the new smart masks: Stone Mossy (granite, dust in cavities, moss
from the top), Paint Sun Faded (faded where it faces the sky, sharp chipped edges), Steel Water
Stained (water stains) and Plastic Grimy (soft worn edges, grime in cavities). The existing test
applies every material on the sample and checks it changes the composite.
10 -> 18 procedural smart masks on the shelf and through mask.smart.apply: Edges Soft, Edges
Sharp, Exposed Areas, Thin Areas, Dust in Cavities, Moss from Top, Water Stains and Sun Faded,
built from the mesh-map generators and triplanar patterns like the others (any resolution).
The existing test applies each on the baked sample and checks it is not empty.
A layer or folder can show only on the mesh parts you pick: right-click a layer > Geometry mask
lists the parts of its texture set as checkboxes; Show on all parts clears it.
- Layer.geometry_mask (part names, serde default); the compositor zeroes the layer's mask on
texels whose triangle (UV G-buffer) lies in another part, so it combines with painted masks,
mask with height, folders and anchors; an instance keeps its own
- layer.set {geometryMask: [names] | null} (unknown parts refused), textureSet.parts {ts?};
inspect shows geometryMask per layer and parts per set
- translations for the menu labels in all eight UI languages
- tests: compositor split of one material into two parts; engine commands on a two-object OBJ
(parts, masked composite, refused input, inspect, undo, clear)
Paints a light into the base color for hand-painted and mobile looks: base color x (ambient x
ambient occlusion + light x max(n.l, 0)) on the mesh normals, with the light set by azimuth and
elevation. 26 -> 27 library filters.
- Filter::BakedLighting {azimuth, elevation, light, ambient, occlusion} and baked_light()
- the compositor reads the texel's normal and the baked AO (none baked: no occlusion) and
lights the base color only; content only (Adjustments)
- effect.add.filter / effect.set / filter.list; property sliders; translations in all eight UI
languages
- tests: lit from the normal side the color stays, from behind only ambient remains, roughness
untouched; occlusion weighting
The filter library grows from 23 to 26 filters for layer content and masks.
- Bevel (Blur and sharpen): values ramp from 0 at a shape's edge up to their own level over
the width, from the coverage-weighted box blur; never raises a value
- Glow (Blur and sharpen): adds the blur of the values times the amount
- Mosaic (Distort): square cells, each the value at its center, sampled at absolute texel
positions so cells line up across tiles
- effect.add.filter / effect.set / filter.list cover them; shelf thumbnails, property sliders
and translations in all eight UI languages
- tests: compositor behaviour of each, the engine filter library test adds and composites them
The filter library grows from 18 to 23 filters for layer content and masks.
- High Pass (Blur and sharpen): the detail finer than the radius around mid gray (0 for
signed channels), sharing the box-blur path, premultiplied by coverage
- Edge Detect (Adjustments): gradient magnitude from coverage-weighted central differences;
a side outside the UV island reads the texel itself, so seams are not edges
- Warp Directional (Distort): the warp's noise offset along one direction
- Grayscale and Normal Invert (Adjustments, content only): luminance for colors, flipped
green for normal maps
- effect.add.filter / effect.set / filter.list cover them (CLI, control channel, MCP);
shelf thumbnails, property sliders and translations in all eight UI languages
- tests: compositor behaviour of each new filter, the engine filter library test adds and
composites them