An odd tile stride: a power of two divides the row length on
power-of-two sets and read the same few columns. A mask is planned on
its own, so a paint layer with nothing painted still shows its mask's
histogram.
The Levels effect's properties now show a histogram of its input, the
mask below it or (on layer content) a channel picked above it, with the
input range marked. effect.histogram {effect, channel?, bins?} gives
agents the same counts. Large sets are sampled (at most 256 tiles), so
the cost stays flat up to 8K.
The map is stored as skew.bin next to the high polys and the cage. A map that fails the
baker's checks on load is skipped with a log line.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
UV island fill grew the island through shared vertex indices. Imported
meshes often split vertices along hard edges, or give every face its
own, while the UVs run on; the fill then stopped at single polygons.
Triangles that share an edge in UV space now form the island.
Fixes#51.
Carbon Fiber, Fabric Cotton, Denim and Velvet were all the same plain
weave in different colours. A new Twill weave pattern (2/2: diagonal
ribs, the weft darker than the warp) now gives Denim its diagonal and
Carbon Fiber its light and dark tows under a clear coat; Velvet is a
soft pile with no weave under its sheen; Fabric Cotton keeps the plain
weave. Twill weave is also a fill pattern, translated into all nine
other UI languages.
Fixes#97.
An eye menu above the list shows, hides or inverts every texture set;
the focus button shows only the active one, and shows them all again
when pressed a second time. textureSet.visibility {mode} does the same
for agents.
Fixes#72.
Alt+click on a channel of a fill's or the brush's Material section turns
that channel on and every other one off (one undo step for a fill).
tool.material and layer.fill.set take solo: true for the same.
Fixes#74.
Parts a mesh file leaves unnamed are named after the file. The project
stored the mesh as mesh.<ext> and read it back under that name, so a
reopened quad.gltf named its part "mesh" and geometry masks on "quad"
hid their layer. The project now keeps the imported file's name
(mesh_file) and reads the stored mesh under it, on open and on a
pathless reimport. Older projects read as before.
Fixes#76.
layer.add.decal and layer.decal.set take up: [x, y, z]. Without it the
decal keeps the view's up, and when that runs along the surface normal
(a top face seen from a level camera) it takes the view direction, so
the far edge is up, instead of an arbitrary perpendicular.
Fixes#64.
Thickness is the mean hit distance divided by the max occluder distance,
so the old shared default of 0.25 of the bounding box diagonal turned most
thin parts of a model nearly black, and long rays reached geometry behind
single-sided parts. 0.1 is the default in Adobe's public baker documentation.
AO and bent normals keep 0.25.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New texturecraft_texel::ColorSpace (sRGB, Linear Rec.709, ACEScg, ACES2065-1): the matrices are
derived at first use from the published primaries and white points (BT.709, ACES S-2014-004,
SMPTE ST 2065-1) with Bradford adaptation, so nothing is copied from a colour-management
library. ExportOptions::color_space (command and dialog: `colorSpace`) converts the colour maps
on their way out; data maps (normal, height, roughness...) are never converted.
None keeps today's behaviour: sRGB in 8/16-bit files, linear Rec.709 in float files. A linear
space in an integer file is written without the sRGB curve; ACEScg and ACES2065-1 in integer
files warn that values outside 0-1 are clamped (EXR and HDR keep them). `$colorSpace` in a file
name template now also says ACEScg / ACES2065-1. The export dialog gets a Color space combo
(label translated in all ten languages).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
file.importMaterialX {path, material?, name?} reads an open_pbr_surface, standard_surface or
gltf_pbr material and adds one fill layer: image inputs (directly, through a nodegraph output
or normalmap/convert/constant nodes, with fileprefix and the first UDIM tile) become image
resources and sources, literal values become uniform sources (sRGB-tagged colours converted to
linear, colours on scalar channels averaged), the displacement shader becomes height, and the
first image's uvtiling becomes the UV projection scale. Emission follows the specifications'
defaults (off unless emission_luminance / emission is above 0).
Images are read only from the document's folder and below: a document is untrusted. Channels
the texture set lacks, unreadable images and unsupported nodes are reported in `warnings`;
nothing to import is an error. The whole import is one undo step.
Written from the ASWF MaterialX 1.39 and OpenPBR Surface specifications; the reader caps size,
depth and element count and has mutation tests. The inverse of the MaterialX export in #50.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The Assets shelf has a Brushes tab: presets grouped as Basic (hard, soft,
airbrush, square, dots), Wear and grunge (dry brush, chalk, spray, grunge,
splatter, scratches, chips, cracks, drips) and Details (stars, stitches,
rivets, fur), each with a preview of its stroke. A click sets the stroke (alpha,
spacing, flow, hardness, angle, path following, jitters, particles) and keeps
the brush's size, alignment, culling, symmetry and lazy mouse. My brushes saves
the current brush as a .tcbrush file in the brushes folder and lists them.
Commands: brush.preset.list, brush.preset.apply {preset}, brush.preset.save
{path} and brush.preset.load {path} (an image alpha from another project is
dropped). Labels translated into the other nine UI languages.
A map chosen with `bake.autoRebake {map}` (or the new Auto-rebake checkbox in the bake mode's
per-map panel) bakes itself again, alone, whenever what it was baked from changes: the texture
set's bake settings (except which maps are ticked), the low poly, the high polys or the cage.
The apps poll `Session::auto_rebake_due` each frame and bake the due sets in the background;
`bake.autoRebake.run` does the same once, blocking, for agents and scripts.
A set only takes part once it has the map baked at its current output size, so Auto-rebake
keeps a bake current without starting one or leaving a set's maps at two sizes. A manual bake
of the map also marks the set up to date, and a change made while a bake runs triggers another.
The choice isn't saved in the project. The other maps of the set are left as they were.
Strings translated in all nine languages (native-speaker review welcome, as for the rest).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
resource.text draws one or more lines of text, shaped with harfrust (kerning,
ligatures, joined scripts) from the font's outlines (skrifa) and filled by a
non-zero scanline rasterizer, cropped to the ink, as an image resource: white
for the brush alpha, or a color for a decal. text.fonts lists the installed
families and styles, read from each font file's name table only (246 families in
80 ms here); Ubuntu Light and Hack from the UI's built-in fonts are always there
and are the fallback in the browser.
- Properties > Alpha > Text: the text, a font and style, Use as brush alpha and
Place as decal (in the tool's base color).
- Image alphas keep their proportions (their longer side spans the stamp), so a
line of text stays a line; image thumbnails are letterboxed and show alpha.
- harfrust 0.12 and skrifa 0.44 are the versions egui already builds, so the
lockfile gains no packages.
Fixes#40
A greyscale skew map over the UV atlas turns the transfer rays that start from the built-in
distance cage from the averaged direction towards the low poly's base normal (the vertex
normal, or each triangle's flat normal). 0 keeps the ray, 1 turns it fully, grey blends. Edge
protection fades the correction out near hard edges (faces more than about 30 degrees apart),
by distance as a fraction of the mesh diagonal and a contrast exponent.
New bake::SkewMap and BakeRequest::skew (a custom cage mesh sets its own rays and ignores it).
Engine: bake.skew.set {value | path, edgeDistance, edgeContrast, base} and bake.skew.clear;
the skew shows in bake.highPoly.list. The map is not saved in the project yet.
Tests: unit tests for sampling, validation, hard edges and the blend; an analytic baker test
(a leaning low poly under a plane: black unchanged, white equals the upright height, grey
between); an engine test through the commands including an image map and refused input.
Ported from SurfaceCraft's baker (MIT OR Apache-2.0) and adapted to this crate's Ctx.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Adding a filter from the shelf selects it. Every stroke after that was
refused with "the selected effect is not a paint effect" until the user
re-selected the layer, and on a fresh project's empty "Layer 1" the
filter itself showed no change, so filters looked broken.
- With a non-paint effect selected, a stroke paints what lies beneath
it: the nearest paint effect below it in the same stack, else the
paint layer's own pixels (content), or a new mask paint effect
inserted just below it (mask). The new paint goes through the filter.
- A filter on a fill layer's content still cannot be painted, with an
error that says why.
- The shelf tells the user when a filter lands on a paint layer that
has nothing painted yet.
Tests cover each case and fail on the old code.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
file.exportTextures takes `materialX: true` and, next to the textures, writes one
`<mesh>_<set>.mtlx` per texture set: an open_pbr_surface whose inputs read tiledimage nodes,
inside a surfacematerial. It follows the "OpenPBR (separate maps)" preset's inputs (base,
metalness, roughness, anisotropy, coat, fuzz, transmission, subsurface, emission, opacity,
normal through a normalmap node, height as a displacement shader). Colour maps are tagged
srgb_texture; data maps are linear. UDIM sets use the <UDIM> filename token. A set with no
OpenPBR map, or DirectX normals (the normalmap node reads OpenGL), is reported in `warnings`.
Written from the ASWF MaterialX 1.39 and OpenPBR Surface specifications, in pure Rust with no
MaterialX library. Engine tests cover a two-set export, UDIM and the off/warn paths.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Previously, r.request_focus() was called unconditionally on every
frame inside the layer rename editor, which continually wiped out
r.lost_focus() in egui's memory and trapped keyboard focus inside
the text edit. As a result, clicking outside never exited rename mode,
Enter was unhandled, and keyboard shortcuts including Undo (Ctrl+Z)
were permanently suppressed by egui_wants_keyboard_input.
- Request focus via widget ID once when renaming starts instead of every frame
- Submit and close rename mode on Enter or when focus is lost
- Cancel without saving on Escape
- Prevent row double-clicks, row clicks, and drag-and-drop from interfering with active text editing
- Add regression test in session.rs verifying layer.rename and edit.undo
Fixes#39
Colors near a chosen color shift towards a new one, keeping their shading and texture.
27 -> 28 library filters.
- Filter::ReplaceColor {from, to, tolerance, softness}: each color within the tolerance (RGB
distance 0..1) moves by to - from, fading out over the softness (smoothstep); far colors and
scalar channels are untouched; content only (Adjustments)
- effect.add.filter / effect.set take from and to as linear RGB or "#rrggbb"; Properties has a
swatch per color and the two sliders; translations in all eight UI languages
- tests: near, far and halfway colors, scalars; the engine filter library test adds it
48 -> 54 procedural materials on the shelf and through material.apply:
- Rust (Metal): pitted, blotchy orange-brown iron oxide, a rough dielectric
- Slate, Sandstone, Terrazzo (Stone & Masonry): layered dark stone, fine warm grains, pale
binder with polished stone chips
- Cork and Paper (Organic): granular pored cork, off-white paper with a faint tooth
The existing test applies every material on the sample and checks it changes the composite;
each was also checked on the material ball.
A Geometry mask tool (key 8) shows or hides the selected layer on the mesh part under a click,
so geometry masks can be set on the model instead of from the part list.
- Tool::GeometryMask; tool.geometryMask selects it and tool.click toggles the part under the
point ({layer, part, shown, geometryMask}); showing every part again clears the mask; one
undo step per click; refused on empty space, without a selected layer, or on a part of
another texture set
- the tool shelf, the tool bar hint and Properties (the layer's parts, shown or hidden, and Show
on all parts); the hint is translated in all eight UI languages
- test: clicks on a two-object OBJ hide, show and clear, undo, and a click on empty space
Strokes can repeat around an axis through the mesh center, 2 to 32 copies, on their own or with
the X/Y/Z mirrors (each mirror is spread too).
- Symmetry gains radial (copies) and axis (X/Y/Z, default Y), serde defaults; sanitized clamps
- symmetry copies are marked and paint where symmetry puts them: the camera visibility and
back-face tests apply to the stroke itself only, so copies on the far side of the model paint
(mirror Z included); they still only paint surfaces facing the copy
- tool.brush {symmetryRadial, symmetryAxis}, shown in its result as radialSymmetry; Properties >
Lazy mouse and symmetry: Radial copies slider and axis; translations in all eight languages
- tests: copies a quarter turn apart, with mirrors, clamping; an engine stroke paints the back of
a sphere through radial symmetry
17 -> 21 smart materials on the new smart masks: Stone Mossy (granite, dust in cavities, moss
from the top), Paint Sun Faded (faded where it faces the sky, sharp chipped edges), Steel Water
Stained (water stains) and Plastic Grimy (soft worn edges, grime in cavities). The existing test
applies every material on the sample and checks it changes the composite.
10 -> 18 procedural smart masks on the shelf and through mask.smart.apply: Edges Soft, Edges
Sharp, Exposed Areas, Thin Areas, Dust in Cavities, Moss from Top, Water Stains and Sun Faded,
built from the mesh-map generators and triplanar patterns like the others (any resolution).
The existing test applies each on the baked sample and checks it is not empty.
A layer or folder can show only on the mesh parts you pick: right-click a layer > Geometry mask
lists the parts of its texture set as checkboxes; Show on all parts clears it.
- Layer.geometry_mask (part names, serde default); the compositor zeroes the layer's mask on
texels whose triangle (UV G-buffer) lies in another part, so it combines with painted masks,
mask with height, folders and anchors; an instance keeps its own
- layer.set {geometryMask: [names] | null} (unknown parts refused), textureSet.parts {ts?};
inspect shows geometryMask per layer and parts per set
- translations for the menu labels in all eight UI languages
- tests: compositor split of one material into two parts; engine commands on a two-object OBJ
(parts, masked composite, refused input, inspect, undo, clear)
Paints a light into the base color for hand-painted and mobile looks: base color x (ambient x
ambient occlusion + light x max(n.l, 0)) on the mesh normals, with the light set by azimuth and
elevation. 26 -> 27 library filters.
- Filter::BakedLighting {azimuth, elevation, light, ambient, occlusion} and baked_light()
- the compositor reads the texel's normal and the baked AO (none baked: no occlusion) and
lights the base color only; content only (Adjustments)
- effect.add.filter / effect.set / filter.list; property sliders; translations in all eight UI
languages
- tests: lit from the normal side the color stays, from behind only ambient remains, roughness
untouched; occlusion weighting
The filter library grows from 23 to 26 filters for layer content and masks.
- Bevel (Blur and sharpen): values ramp from 0 at a shape's edge up to their own level over
the width, from the coverage-weighted box blur; never raises a value
- Glow (Blur and sharpen): adds the blur of the values times the amount
- Mosaic (Distort): square cells, each the value at its center, sampled at absolute texel
positions so cells line up across tiles
- effect.add.filter / effect.set / filter.list cover them; shelf thumbnails, property sliders
and translations in all eight UI languages
- tests: compositor behaviour of each, the engine filter library test adds and composites them
The filter library grows from 18 to 23 filters for layer content and masks.
- High Pass (Blur and sharpen): the detail finer than the radius around mid gray (0 for
signed channels), sharing the box-blur path, premultiplied by coverage
- Edge Detect (Adjustments): gradient magnitude from coverage-weighted central differences;
a side outside the UV island reads the texel itself, so seams are not edges
- Warp Directional (Distort): the warp's noise offset along one direction
- Grayscale and Normal Invert (Adjustments, content only): luminance for colors, flipped
green for normal maps
- effect.add.filter / effect.set / filter.list cover them (CLI, control channel, MCP);
shelf thumbnails, property sliders and translations in all eight UI languages
- tests: compositor behaviour of each new filter, the engine filter library test adds and
composites them