Merge main into feat/palette-synonyms

This commit is contained in:
dotCooCoo committed 2026-11-17 19:33:13 -08:00
commit 186874f736
624 files changed
+60203 -4740

No files matched your search

+27 -7
View File
@@ -151,7 +151,7 @@ fill or stroke (fields as in `swatchOptions` plus `group`; a gradient or pattern
The Color Picker is a dialog too: `engine.execute {command: "ui.colorPicker", params: {stroke?, color?}}` opens it for the fill (or stroke) proxy; `ui.dialog.set {field: "hex", value: "00FF00"}` (or `color`, `channel`, `webOnly`, `swatches`) then `ui.dialog.confirm` applies the colour through `paint.setFill` / `paint.setStroke`.
Sample Color from Screen: `ui.sampleScreenColor {stroke?, picker?}` shows the system's color sampler (macOS; Linux through the XDG desktop portal's [PickColor](https://flatpak.github.io/xdg-desktop-portal/docs/doc-org.freedesktop.portal.Screenshot.html); browsers with an EyeDropper) and returns `null` at once. When the person at the computer clicks a color anywhere on the screen, it runs `paint.setFill` (or `paint.setStroke`) with that color as one undo step, or with `picker: true` sets the open Color Picker's `color`; a cancel (Escape on macOS and in browsers) leaves the colors as they were. The sampled display sRGB color is converted into the working RGB space. `ui.inspect` reports `screenSampler: true` until the sampler answers. On Linux, a session without a portal that has PickColor, a portal that does not return from the call within 25 seconds (VectorCraft's own limit) or leaves the bus before it answers, and a portal that ends the request in another way each put a message in the status bar and end the wait, so the sampler can be shown again. A portal that returns from the call and then neither answers nor leaves the bus keeps the sampler open. Without a sampler (Windows, FreeBSD, DragonFly BSD, NetBSD, OpenBSD, other browsers) the call returns an error. To read a color from VectorCraft's own window without a person, call `ui.screenshot`.
Sample Color from Screen: `ui.sampleScreenColor {stroke?, picker?}` shows the system's color sampler (macOS; Linux through the XDG desktop portal's [PickColor](https://flatpak.github.io/xdg-desktop-portal/docs/doc-org.freedesktop.portal.Screenshot.html); Windows; browsers with an EyeDropper) and returns `null` at once. When the person at the computer clicks a color anywhere on the screen, it runs `paint.setFill` (or `paint.setStroke`) with that color as one undo step, or with `picker: true` sets the open Color Picker's `color`; a cancel (Escape on macOS, Windows and in browsers) leaves the colors as they were. The sampled display sRGB color is converted into the working RGB space. `ui.inspect` reports `screenSampler: true` until the sampler answers. On Windows, the sampler copies every monitor when it is shown and covers them with that still copy under a crosshair: a left click picks the copied pixel, read as sRGB (the colors of HDR and wide-gamut displays are not converted), and Escape, a click of another mouse button or switching to another window cancels. A screen that can't be copied puts a message in the status bar and ends the wait. On Linux, a session without a portal that has PickColor, a portal that does not return from the call within 25 seconds (VectorCraft's own limit) or leaves the bus before it answers, and a portal that ends the request in another way each put a message in the status bar and end the wait, so the sampler can be shown again. A portal that returns from the call and then neither answers nor leaves the bus keeps the sampler open. Without a sampler (FreeBSD, DragonFly BSD, NetBSD, OpenBSD, other browsers) the call returns an error. To read a color from VectorCraft's own window without a person, call `ui.screenshot`.
Graphic styles: `ui.graphicStyleOptions {name}` opens the `graphicStyleOptions` dialog (field `name`) for a style and
`ui.dialog.confirm` renames it with `graphicStyle.rename` (a name another style has returns an error and keeps the
@@ -265,7 +265,9 @@ My Themes tab lists the saved themes; every action runs a command (`colorTheme.s
Color Wheel panel (`window.panel {panel: "colorWheel"}`): a hue ring around a saturation and brightness square. A
pick runs the commands the Color panel's sliders run: `paint.setFill` or `paint.setStroke` with `keepModel`,
`paint.editGradient` for a gradient's selected stop, and `paint.freeform.setPoint` for a freeform gradient's selected
point (the first stop or point when none is selected).
point (the first stop or point when none is selected). `ui.colorWheel {view?, channel?}` shows the wheel or the box (a
color field with a channel strip at its right) and picks the box's channel; it returns the settings, and `ui.inspect`
reports them as `ui.color_wheel`.
Edit Colors dialogs: `ui.colorBalanceDialog` opens Adjust Colors (`colorBalance`: fields `mode` `gray`/`rgb`/`cmyk`/
`global`, the channels `r` `g` `b` / `c` `m` `y` `k` / `gray` / `tint` (global mode) from −100 to 100, `convert`, `fill`, `stroke`,
@@ -302,7 +304,11 @@ right-click menu has Remove Color too. The base color can't be removed. A remove
has current colors and art or a group is open: it then keeps them with `to: null`, that art keeps its colors, and the
group's swatch at that place is removed. A row with no current colors recolors no art; with a group, the new color of
one with `added: true` that is not excluded is added to the group after the group's other colors, and a row made with New Row adds none.
Setting `colors`, a preserve flag or `limitTo` reduces the rows again (also on `ui.dialog.confirm`). The dialog previews
`groupStorage` shows the Color Groups list (true when the dialog opens); setting `group` to a color group's name makes
it the group being edited, as opening on it does, and refuses a name no group has; `groupAction` (`save`, `new` or
`delete`) runs the list's Save Changes, New Color Group or Delete button on the next frame, or first on confirm (see
`docs/mcp.md`). Setting `colors`, a preserve flag or `limitTo` reduces the rows again (also on `ui.dialog.confirm`).
The dialog previews
`recolor.apply` on the canvas; confirm keeps it as one undo step (with a group, the group is rewritten in the same
step; with no art selected only the group changes). In the Swatches panel, double-clicking a colour group's folder,
or the options button while a group is selected, opens it.
@@ -496,7 +502,10 @@ the desktop each floating window is an OS window of its own; on the web and on W
window. `ui.toolbar_pos` in `ui.inspect` is the Tools panel's corner (null: docked); `window.panel.float` and
`window.panel.dock` with `panel: "tools"` float it at `x`, `y` or dock it on the window's left edge. With
`window.toolsBesideCanvas {on?}` (Window › Toolbars › Keep Tools Beside the Canvas, off by default; `ui.tools_beside_canvas`)
the docked Tools panel sits between left-side panels and the canvas, and `window.panel.dock` docks it there.
the docked Tools panel sits between left-side panels and the canvas, and `window.panel.dock` docks it there. Dropping
a floating Tools panel on the canvas's left edge, right of panels docked on the left, turns the setting on, and on the
window's left edge turns it off; with no panels docked on the left, a drop leaves the setting as it is
(`docs/mcp.md` › Tools panel placement).
Flatten Transparency: `ui.flattenTransparencyDialog` opens the `flattenTransparency` dialog for the selection
(fields `preset`: a preset name, setting it loads that preset's options; the option keys of
@@ -669,7 +678,9 @@ agents) opens the `rasterEffectsSettings` dialog. Its fields are what `document.
(`resolution`, `colorModel`, `background`, `antiAlias`, `clippingMask`, `addAround` in pt, `preserveSpotColors`);
`ui.dialog.confirm` runs it with them as one undo step; a bad value keeps the dialog open. Object → Rasterize… opens a
`command` dialog for `object.rasterize` whose fields (`ppi`, `colorModel`, `background`, `antiAlias`, `clippingMask`,
`addAround`) start from these settings.
`addAround`) start from these settings. `colorModel`, `antiAlias` (`none`, `art`, `type`) and `background` (`white`,
`transparent`) are dropdowns; `ui.dialog.set` also takes any other value the command takes, and the dialog sends it
unchanged.
Missing linked files: `app.open` of a document whose linked images' files can't be found (`document.open`'s
`missingLinks`) opens the `missingLinks` dialog for the first (fields `missing`: `[{name, path, ids}]`, `modified`,
@@ -733,7 +744,8 @@ type with those options (`file.place {text: {…}}`).
System clipboard formats: through the desktop app, `edit.copy`, `edit.cut`, `artboard.copy` and `artboard.cut` publish what `clipboard.flavours`
lists to the system clipboard (once they are written, the status bar shows the first of the PNG's and PDF's
`warnings`, such as an image that couldn't be decoded), and every Paste command first loads what another app copied (`clipboard.importSvg`,
`warnings`, such as an image that couldn't be decoded, and how many there are, and hovering the message lists them, unless
another message has replaced the Copy or Cut's meanwhile), and every Paste command first loads what another app copied (`clipboard.importSvg`,
`importPdf`, `importEps`, `importText` or `importImage`, centred in the view; the desktop app reads PDF and EPS from
the Windows clipboard and, with SVG, from the macOS pasteboard, and an `.eps` file, or a `.ai` or `.ait` file that holds a PDF or PostScript, copied in a file manager anywhere; a copied `.ai` or `.ait` file that holds a PDF loads with `importPdf {editingData: true}`, which reads its editing data); an import error answers the Paste with that error
and pastes nothing. Cmd+V also pastes a bitmap or PDF with no text beside it (on the key's release, as egui sends no
@@ -816,13 +828,21 @@ selected slices. Hidden or locked slices (`view.slices.hide`, `view.slices.lock`
EPS Options: Export As… with the EPS format (`file.exportAs {format: "eps"}`, then the save dialog), or
`ui.epsOptionsDialog {path?, …document.exportEps options}` for agents, opens the `epsOptions` dialog. Its fields are
`document.export` params: `previewFormat` (`none`, `tiffBw`, `tiffColor`), `transparentPreview`, `overprints`
(`preserve`, `discard`), `flattenerPreset` (a built-in or saved preset's name), `includeLinkedFiles`, `thumbnails`,
(`preserve`, `discard`), `flattenerPreset` (a built-in or saved preset's name), `flattener` (custom flattener options
over the preset, as `object.flattenTransparency` takes them), `includeLinkedFiles`, `thumbnails`,
`cmykPostScript`, `compatibleGradients`, `level` (`2`, `3`), plus `path` and the artboard choice (`useArtboards`,
`range`). `ui.dialog.confirm` checks them (a bad value or an unknown preset keeps the dialog open), remembers them for
the next EPS Options and writes the file(s), asking for a path when there is none. With Use Artboards and two or more
artboards, it writes a central file of the whole document under the chosen name and one `{stem}_{artboard}.eps` per
artboard. When no art shows, it writes only the artboard files.
The Custom… button beside the preset opens the `epsFlattenerOptions` dialog over EPS Options, on the options the
export would use. Its fields are the flattener options; `preserveAlpha` is always off, and overprints are kept only
with `overprints: "preserve"`. Its `ui.dialog.confirm` sets every option as `flattener` (the preset then shows
[Custom]) and goes back to EPS Options; `ui.dialog.cancel` goes back with the options unchanged. Choosing a preset,
in the dropdown or with `ui.dialog.set {flattenerPreset}`, drops `flattener`, and so does `ui.epsOptionsDialog` with
a `flattenerPreset` and no `flattener`.
Data Recovery: at launch, copies left behind by a crash open the `recovery` dialog (never copies another running
instance keeps, so instances started side by side for screenshots don't get it). Fields: `copies` (`[{file, title,
saved}]`, from `file.recovery.list`) and `discard`. `ui.dialog.confirm` restores them all (`file.recovery.restore`
+7 -2
View File
@@ -84,6 +84,7 @@ The canvas is rasterized on the CPU (`vectorcraft-render`, vello_cpu); the GPU (
- On Linux with Mesa, `MESA_VK_DEVICE_SELECT=10de:2f04!` (vendor:device as `vulkaninfo --summary` or `lspci -nn` show it) leaves only that GPU to Vulkan, and `DRI_PRIME=1` picks the other GPU.
- Help › About and the control channel's `ui.inspect` (`graphicsAdapter`) show the adapter in use, and the app logs it at startup.
- **How frames reach the display.** By default the window presents with `autovsync` and lets the display queue one frame. With `autovsync`, wgpu uses relaxed vsync (FifoRelaxed, which tears a frame that arrives late) where the driver offers it, else vsync (Fifo). For a launch, `--present-mode` (or `VECTORCRAFT_PRESENT_MODE`) sets the present mode to `fifo` (vsync), `autovsync` or `novsync` (wgpu uses Immediate, else Mailbox, else Fifo, whichever the driver offers), and `--frame-latency` (or `VECTORCRAFT_FRAME_LATENCY`) sets the frames the display may queue, `1` to `3`. A flag overrides its variable, and a value that is not one of these stops the app with a message. On Windows and Linux, a launch with either one set opens its files in a new window, as with `--new-instance`, instead of handing them to a running VectorCraft. At startup the log records what the app asks the window surface for, for example `requested window surface: autovsync, frame latency 2 (override)`. The driver chooses the mode that `autovsync` and `novsync` resolve to and may clamp the latency, and on macOS egui uses at least 2 frames while the window is being resized. The code is `apps/vectorcraft/src/presentation.rs`.
- **Preferences › Performance › Low-Latency Drawing** (`lowLatencyDrawing`, off by default) presents with `novsync` and is read when the app starts, so a change applies after a restart. The present mode comes from `--present-mode` first, then `VECTORCRAFT_PRESENT_MODE`, then this preference, then the default (`autovsync`); `--frame-latency` and `VECTORCRAFT_FRAME_LATENCY` still set the latency with it on. The log names where the mode came from: `requested window surface: novsync (preference), frame latency 1`. Whenever the window presents without vsync (`novsync`, from the preference or an override), frames start at most 240 times a second (about 4.17 ms apart); with vsync the display paces them and no cap applies.
## Logs
@@ -111,7 +112,7 @@ When the interface thread stays in one part of a frame for 3 s (VectorCraft's ow
## macOS: the menu bar
On macOS the menus live in the system menu bar, not in the window's app bar (which keeps the brand mark, Home, the search icon and the workspace switcher next to the traffic lights, centred on the bar by `apps/vectorcraft/src/mac_window.rs`). `--in-window-menus` or `VECTORCRAFT_IN_WINDOW_MENUS=1` keeps them in the window, as on Windows, Linux and the web; so does a menu bar AppKit refuses to build (logged). `ui.inspect` says which with `nativeMenuBar`.
On macOS the menus live in the system menu bar, not in the window's app bar (which keeps the brand mark, Home, the search field and the workspace switcher next to the traffic lights, centred on the bar by `apps/vectorcraft/src/mac_window.rs`). `--in-window-menus` or `VECTORCRAFT_IN_WINDOW_MENUS=1` keeps them in the window, as on Windows, Linux and the web; so does a menu bar AppKit refuses to build (logged). `ui.inspect` says which with `nativeMenuBar`.
- **One menu model.** `crates/ui-egui/src/native_menu.rs` (platform-free, tested on every platform) builds the menu bar from the in-window menus (`menus::menu_tree`, each item through `menus::entry`, which the in-window menus draw too) and lays it out the Mac way: the VectorCraft menu holds About, Settings ▸ (one item per Preferences page, General… ⌘K), Language ▸, Appearance ▸ (UI brightness), Services, Hide VectorCraft ⌃⌘H (⌘H stays View › Hide Edges), Hide Others ⌥⌘H, Show All and Quit ⌘Q (the app's own `app.quit`, so unsaved documents are asked about); those leave Edit and Help. The in-window bar itself never shows the VectorCraft menu (it starts at File, as in Illustrator, on every platform): Language and Appearance have no in-window menu and are synthesized in `mac_layout`, and Quit is File › Exit in the window, relabelled to Quit in the App menu. Window starts with Minimize ⌃⌘M and Zoom and ends with Bring All to Front, and Help is the system's Help menu (its search field). A system key a command (or a user's shortcut) already has stays the command's, and the log says so.
- **The native side** is `apps/vectorcraft/src/mac_menu.rs`: muda (`=0.21.1`, default features off, macOS only, no `unsafe`) builds the `NSMenu`s. Labels, enabled and checked are updated in place when anything they show may have changed (a command ran, the document, its history or selection changed, a click or a key press); a change of structure (a recent file, the language, a shortcut) rebuilds the menus. While an interaction is open (for example a move, scale or shape drag, a dialog's preview or the font menu's preview), the app updates them for the document's changes only when the interaction begins and when it ends.
@@ -297,7 +298,11 @@ other `sv-*` locale resolve to it), Georgian (`ka`, complete; `ka-GE` and `ka_GE
control channel, MCP and tests read them) and are translated only where the status bar draws them
(`i18n::msg`). `@msg` catalog rows hold a whole message or a template such as
`Couldn't open {name}: {e}`; `{_1}`, `{_2}` … stand for the format string's `{}`, and the values in the
placeholders are translated in turn (the reason after `: {e}` is often a message too). A value that starts with
placeholders are translated in turn (the reason after `: {e}` is often a message too). A template needs text
between any two placeholders, since the catalog cannot tell where `{a}{b}` splits: make the message with the
side-by-side values joined into one (`unknown parameter `{key}``, where `key` is `marks.ofset`). The catalog
leaves out a row whose template has two placeholders in a row or no text; `i18n::tests` fails on such a row
and on such a message, and the untranslated report counts it as missing. A value that starts with
`{` is translated only when it has an exact row, so a JSON object stays as it is; a value that starts with `[` is
also matched against a template that starts with `[` and an index of digits, such as an effect's refusal
``[{j}] `{_1}`: {why}``, so its reason is translated while a JSON array stays as it is. A literal brace in a
+8 -3
View File
@@ -20,12 +20,17 @@ The **Dimension Tool** is in the Modify section of the toolbar. Its strip offers
first point was picked on an anchor, the second also snaps onto the construction guides through
it; any other first point has no construction guides through it. The guides
show while hovering, before each click. VectorCraft's own rules decide where a point lands: an
anchor within 8 pixels takes it first; a point on a guide stays on the guide where the pointer
anchor within 8 pixels takes it first; with Smart Guides or Snap to Point on, the end of a line
of a visible, unlocked dimension already drawn (its dimension line, or the far end of an
extension line) within 8 pixels takes it next, without a link to that dimension; a point on a
guide stays on the guide where the pointer
is, except that it moves onto a segment within the Smart Guides snapping tolerance, or, on a
construction guide or a Snap to Glyph guide that runs at an angle, onto the place where that
guide crosses another object's alignment line within twice that tolerance; a point that no
anchor, guide, grid or pixel snapping places lands on the closest point of a segment within 8
pixels.
anchor, guide, grid or pixel snapping places lands on the closest point of a segment, or of a
line of a dimension already drawn, within 8 pixels. With Smart Guides and Anchor/Path Labels
on, a point on an anchor or a line end shows the "anchor" label, and a point on a segment or
line shows the "path" label. These rules apply to the Linear points.
A linear dimension is aligned, horizontal or vertical, as the
[linear dimensions help](https://helpx.adobe.com/illustrator/desktop/measure-and-align/plot-and-measure/plot-linear-dimensions-of-objects.html)
describes: after the second click, clicking again places an aligned dimension, and moving the
+4 -3
View File
@@ -1,6 +1,6 @@
# Effects parity
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-11-12 · **Change:** minor (Extrude & Bevel, Inflate and Rotate seams have round joins under a white light and in the 3D (Classic) effects too, no longer reaching past the solid as thorns; previously: Effect Gallery: a thumbnail for each filter and an in-dialog preview on an original drawing; the 1–2 h for those is done; Extrude & Bevel, Inflate and Rotate merge contours that cross, touch or overlap, as type often draws a glyph, before building a solid; previously: Extrude & Bevel, Inflate and Rotate apply to groups and layers, their objects turning about one shared axis (#4506); the Transform effect's copies of a path with a fill and a stroke (or several fills and strokes, an even-odd fill, or a partly transparent one) are drawn each above the one before, as Expand Appearance makes them (#5920); Expand Appearance makes each copy of a path's Transform effect an object of its own (#5612); previously: Pixelate › Color Halftone: Max Radius in pixels of the Document Raster Effects resolution, 4–127 px, with older documents converted on opening and radii written back in points for older app versions (#3260); Effect dialogs clamp bounded length inputs immediately on commit and flash rejection on invalid input (#4638); previously: Drop Shadow Darkness uses fixed RGB subtraction and CMYK black addition; scores unchanged; Pathfinder › Trap: the Pathfinder panel's Trap… and Effect › Pathfinder › Trap… add an overprinting strip of the lighter colour where two solid colours meet; recounted with Hard Mix (#3061) and Soft Mix already in the catalogue: Pathfinder 13/13, Illustrator effects 49/50) · **Target:** Adobe Illustrator 2026 (30.x)
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-11-17 · **Change:** minor (Twist: a strongly twisted path joins its pieces without kinks, #7069; scores and estimates unchanged; previously: Extrude & Bevel, Inflate and Rotate seams have round joins under a white light and in the 3D (Classic) effects too, no longer reaching past the solid as thorns; previously: Effect Gallery: a thumbnail for each filter and an in-dialog preview on an original drawing; the 1–2 h for those is done; Extrude & Bevel, Inflate and Rotate merge contours that cross, touch or overlap, as type often draws a glyph, before building a solid; previously: Extrude & Bevel, Inflate and Rotate apply to groups and layers, their objects turning about one shared axis (#4506); the Transform effect's copies of a path with a fill and a stroke (or several fills and strokes, an even-odd fill, or a partly transparent one) are drawn each above the one before, as Expand Appearance makes them (#5920); Expand Appearance makes each copy of a path's Transform effect an object of its own (#5612); previously: Pixelate › Color Halftone: Max Radius in pixels of the Document Raster Effects resolution, 4–127 px, with older documents converted on opening and radii written back in points for older app versions (#3260); Effect dialogs clamp bounded length inputs immediately on commit and flash rejection on invalid input (#4638); previously: Drop Shadow Darkness uses fixed RGB subtraction and CMYK black addition; scores unchanged; Pathfinder › Trap: the Pathfinder panel's Trap… and Effect › Pathfinder › Trap… add an overprinting strip of the lighter colour where two solid colours meet; recounted with Hard Mix (#3061) and Soft Mix already in the catalogue: Pathfinder 13/13, Illustrator effects 49/50) · **Target:** Adobe Illustrator 2026 (30.x)
Every entry of Illustrator's Effect menu, by its public feature name, against VectorCraft's effects catalogue
(`effect_catalog()` in `crates/effects/src/lib.rs`) and the Effect menu built from it
@@ -22,7 +22,7 @@ Part of [target-app-parity.md](target-app-parity.md); open work is in [gaps.md](
|---|---|---:|---|
| Convert to Shape | Rectangle, Rounded Rectangle, Ellipse | 3/3 | — |
| Crop Marks | Crop Marks | 1/1 | — |
| Distort & Transform | Free Distort, Pucker & Bloat, Roughen, Transform, Tweak, Twist, Zig Zag | 7/7 | Free Distort's dialog has a handle on each corner of the object's bounds, moved by dragging or with the arrow keys; Zig Zag's ridges are evenly spaced along each segment (#1558), and Smooth points make a continuous wave whose peaks and valleys have handles along the path (#2343); Roughen with Smooth keeps turn-backs smooth instead of cusps that draw as spikes (#1646); Expand Appearance of a path whose Transform effect makes copies gives a group of one object per copy, each painted as the path, and a second Transform effect's copies nest in a group per copy of the first (#5612); drawn, each copy of a path with a fill and a stroke (or several, an even-odd fill or a partly transparent one) paints below the one before, the fills above covering the strokes of the copies below, instead of one path of every copy (#5920), and a group's copies each hold all its members except guides, the original group on top (#6316); a clipping group, a group with a fill or stroke of its own, a group whose type is kept as type, and a group with a member that carries a geometry, Pathfinder or 3D effect copy each member in its place |
| Distort & Transform | Free Distort, Pucker & Bloat, Roughen, Transform, Tweak, Twist, Zig Zag | 7/7 | Free Distort's dialog has a handle on each corner of the object's bounds, moved by dragging or with the arrow keys; Zig Zag's ridges are evenly spaced along each segment (#1558), and Smooth points make a continuous wave whose peaks and valleys have handles along the path (#2343); Roughen with Smooth keeps turn-backs smooth instead of cusps that draw as spikes (#1646); Expand Appearance of a path whose Transform effect makes copies gives a group of one object per copy, each painted as the path, and a second Transform effect's copies nest in a group per copy of the first (#5612); drawn, each copy of a path with a fill and a stroke (or several, an even-odd fill or a partly transparent one) paints below the one before, the fills above covering the strokes of the copies below, instead of one path of every copy (#5920), and a group's copies each hold all its members except guides, the original group on top (#6316); a clipping group, a group with a fill or stroke of its own, a group whose type is kept as type, and a group with a member that carries a geometry, Pathfinder or 3D effect copy each member in its place; Twist's handles follow the rotation's derivative, so a strongly twisted path is a smooth spiral without kinks where its pieces join (#7069, `twist_joins_its_pieces_smoothly`). |
| Path | Offset Path, Outline Object, Outline Stroke | 3/3 | With Use Preview Bounds on, Align, Distribute and the Transform panel still measure type that carries Outline Object by its layout box (preview bounds leave out effects) |
| Pathfinder | Add, Intersect, Exclude, Subtract, Minus Back, Divide, Trim, Merge, Crop, Outline, Hard Mix, Soft Mix, Trap | 13/13 | Trap traps only solid fills (gradients and patterns hide what is below them but don't trap) and spreads each colour's visible area as a whole; the public page gives no default values, so Trap's 0.25 pt, 100% and 40% are VectorCraft's own |
| Rasterize | Rasterize… (as a live effect) | 1/1 | — |
@@ -183,7 +183,7 @@ VectorCraft choices; an original approximation, never compared with another appl
| Materials panel, lighting, ray-traced render | Window › 3D and Materials panel with the object types (Plane, Extrude, Revolve, Inflate) and the Object, Rotation and Lighting settings of the applied effect, Render Settings › Wireframe, which draws the live effect as the edges of its faces, and Quick Actions › Expand as Wireframes ([three-d.md](three-d.md#3d-and-materials-panel)); one to ten directional lights with per-light Color (opaque RGB, white by default), Intensity, Rotation, Height, Softness and neutral Ambient Light, Revolve and colored Inflate use smooth vector shading; Extrude & Bevel and Rotate retain planar shading; original Standard, Diffuse, Top Left and Right lighting rigs; shadows behind or below the object from the first light, blurred by its Softness ([three-d.md](three-d.md#shadows)); the Materials tab's Graphics, document symbols mapped onto Extrude & Bevel's caps and onto a plane, moved with an artboard handle, and wrapped around Revolve's side ([three-d.md](three-d.md#graphics)); no base materials, graphics on Inflate or on Extrude & Bevel's walls and bevels, or ray tracing |
| 3D (Classic): Extrude & Bevel, Revolve, Rotate | Extrude & Bevel (Classic) initial: live, round seam joins, Extrude Depth, Cap, five original bevel shapes with Height and Bevel Extent In or Out, Position presets and rotation gizmo, Perspective, Wireframe, No Shading, Diffuse and Plastic surfaces with one to ten lights, Light Intensity, Ambient Light, Highlight Intensity and Size, Blend Steps, Black, Custom, Black Overprint or no Shading Color ([Black Overprint](https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf#page=188)), Draw Hidden Faces ([create 3D objects](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/create-3d-graphics/create-3d-objects.html)); Revolve (Classic) initial: live, round seam joins, Angle, Cap, Offset from the left or right edge, Position presets and rotation gizmo, Perspective, the same four surfaces, lights, highlight, Blend Steps and Shading Color, groups and layers revolved about one shared axis (same page); Rotate (Classic) initial: live, round seam joins, every fill and stroke turned as one plane, Position presets and rotation gizmo, Perspective, No Shading and Diffuse surfaces with lights, Ambient Light, Blend Steps and Shading Color ([rotate objects in 3D](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/create-3d-graphics/rotate-objects-in-3d.html)); Preserve Spot Colors in all three, unavailable with a Custom Shading Color ([Preserve Spot Color](https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=260)); all three: a lighting sphere on the Lighting tab whose lights drag, move to the back or front, and are added at the front center or deleted down to one ([lighting options](https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=272)); all three: the track cube (face, edge, Shift and ring drags, keyboard steps; [three-d.md](three-d.md#track-cube)); Map Art: none |
| Turntable (30.0 beta) | none |
| Export 3D objects (OBJ, USDA, glTF) | initial: Asset Export's Export 3D Object, and the 3D and Materials panel's Export 3D Object button (which then shows Asset Export with the new assets selected, [three-d.md](three-d.md#3d-and-materials-panel)), collect an object with Extrude & Bevel, Revolve, Inflate or Rotate as a 3D asset, and Export writes its solids as a USDA (the default), USDZ, glTF or OBJ mesh with a material in each solid's paint color (`assets.add3D`, `assets.set3DFormat`, `assets.export3D`); no textures, map art or shading ([3D export help](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/create-3d-graphics/export-3d-vector-artwork.html)) |
| Export 3D objects (OBJ, USDA, glTF) | initial: Asset Export's Export 3D Object, and the 3D and Materials panel's Export 3D Object button (which then shows Asset Export with the new assets selected, [three-d.md](three-d.md#3d-and-materials-panel)), collect an object with Extrude & Bevel, Revolve, Inflate or Rotate as a 3D asset, and Export writes its solids as a USDA (the default), USDZ, glTF or OBJ mesh with a material in each solid's paint color (`assets.add3D`, `assets.set3DFormat`, `assets.export3D`); graphics mapped onto a plane or Extrude & Bevel's caps are exported as PNG textures of those faces, flat and unlit; no graphics on Revolve's side, no materials and no shading ([3D export help](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/create-3d-graphics/export-3d-vector-artwork.html)) |
The `three-d` crate (depends on `geom` and `pathops`, with no UI or GPU dependencies) builds, rotates, projects, shades and depth-sorts the surfaces;
the effects crate turns them into art. What's left (materials and shadows, ray-traced rendering,
@@ -193,6 +193,7 @@ angular cut caps, exact visibility, the rest of 3D Classic (Map Art), Turntable)
| Date | Change | Summary |
|---|---|---|
| 2026-11-17 | minor | Distort & Transform › Twist: handles follow the rotation's derivative, so a strongly twisted path is a smooth spiral instead of pieces meeting at kinks (#7069; `twist_joins_its_pieces_smoothly` in `crates/effects/src/tests.rs`). Scores and estimates unchanged. |
| 2026-11-12 | minor | The seams of Extrude & Bevel, Inflate and Rotate under a white light, and of the faces of Extrude & Bevel (Classic), Revolve (Classic) and Rotate (Classic), went from miter to round joins (the seams of Revolve and of colored lights, and 3D (Classic) Wireframe edges, were already round): no thorns on edge-on facets, and facets with no neighbor now have rounded convex corners ([three-d.md](three-d.md#seams)); scores and estimates unchanged |
| 2026-11-10 | minor | Effect Gallery: each filter has a thumbnail, and the dialog has a preview of the visible stack (or the browsed filter when the stack is empty). Both are an original landscape drawing passed through the filter ([Filter Gallery overview](https://helpx.adobe.com/photoshop/desktop/effects-filters/get-started-with-filters/filter-gallery.html)). The canvas preview and one-undo OK are unchanged. Remaining hours for the gallery's thumbnails and in-dialog preview: 1–2 → none. Counts unchanged (57/57). |
| 2026-11-08 | minor | Extrude & Bevel, Inflate and Rotate merge contours that cross, touch or overlap (a glyph's arm across its stem) before building a solid, so the solid follows the shape as it is filled; others are built as drawn ([three-d.md](three-d.md)); scores and estimates unchanged |
+51 -9
View File
@@ -1,6 +1,6 @@
# File format parity
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-11-15 · **Change:** minor (PDF import: stroked type keeps the line cap, line join and miter limit the file strokes it with, not butt caps and miter joins, #7741; `.ai` and EPS import: in layers that don't draw as the page, art that differs away from an envelope of type no longer costs it its editable type; it keeps its drawn art where, in the pixels it and its drawn art ink, the layers with it differ from the page more than its own check allows, or past the envelopes' share of the page check, #7141; `.ai` and EPS import: a top-object envelope whose mesh saves its sides' curves in pieces draws its contents along each whole curve, as its drawn art does, #7097; previously: PDF import: glyphs in a span with an empty ActualText come in as outlines, #6971; scores and estimates unchanged; previously: `.ai` and EPS import: type from the text document, type a PostScript program sets and legacy `.ai` type are set in an installed face of their font's PostScript name, exact name first, in the version a text document's record keeps; the `.ai` save writes a static font's version when its name alone gives another copy, #6983; `.ai` and EPS import: type keeps the manual kerning of its text document, #6899; `.ai` and EPS import: type in an envelope with Distort Appearance is also tried mapped from the box of what it paints, its strokes' miter tips and strokes a Transform effect moves included, after its glyphs grown by half its strokes' weight, #6824; `.ai` and EPS import: type filled or stroked with a pattern swatch keeps its pattern, from the art style its text document paint names, #6856; #6865: explicitly requested oversized editing artboard; PDF import: Indic type keeps its marks on their line, and a line whose type would not draw as the file does keeps the file's glyphs as outlines, #5235; previously: newly imported SVG/SVGZ titles are filtered and bounded without changing restored titles, #3626; `.ai` and EPS import, and what every export and `.ai` save draw: type's strokes in an envelope paint at their own weight along its bent outlines, Distort Appearance on or off, #6644; `.ai` and EPS import: centred and right-aligned lines of tracked type are aligned without the tracking after their last character, as the file's page aligns them, #6610; `.ai` and EPS import: an envelope saved in Edit Contents whose mesh lies away from its drawn art by a move opens live on that art, #6570; `.ai` save and open: layer colour presets Yellow, Magenta and Cyan keep their colour, as the `Lb` colour index now follows the file's numbering, #6502; `.ai` save: stroked type keeps its stroke's cap, join and miter limit in the text document, #6472; `.ai` and EPS import, PDF import: tracking and manual kerning in horizontally scaled type take the Horizontal Scale, as the file's page spaces such type; `.ai` and EPS import: stroked type in an envelope maps from its glyphs grown by half its stroke, #3179; `.ai` and EPS import: warps of type open as mesh envelopes on their saved grid, #3179; `.ai` and EPS import: stroked type keeps its stroke's cap, join and miter limit from the text document, #6472; `.ai` save: type in a variable font's named instance names its design-space setting, #6388; `.ai` and EPS import: envelopes of type open live where they draw as their drawn art and the layers with them draw as the page, #3179; `.ai` and EPS import: a note for type in an envelope, #3179; `.ai` and EPS import: the live envelope and warped type check sees white art; PDF import: DeviceN images of one ink or of process plates keep their inks, #6348; `.ai` import: images in a spot ink's Separation space keep their ink, #6350; PDF import: Separation images keep their ink, #6314; PDF editable import preserves authored ActualText once, including empty/nested spans and authored ordering (#6165); cross-line/style layout remains approximate; scores and estimates unchanged; PDF marked-text export (#6309): compatible glyphs stay on one layout line with per-glyph offsets; scores and estimates unchanged; PDF import: image masks open colorized by the color they are painted in, #6313; EPS and `.ai` editing data: a ligature the page names by a private-use glyph matches its text object; EPS import: CIDFonts only named, over a Unicode CMap, set as live type; EPS import: CMap mappings to base-font codes and glyph names; EPS import: CID-keyed fonts in FontSets (CFF) draw their glyphs; EPS import: `kshow` procedures kern live type; EPS import: embedded Type 1 fonts' glyphs and widths; EPS import: CID-keyed fonts draw their glyphs; EPS import: Type 42 fonts' characters and widths from the font they carry, show operators' spacing kept as tracking; EPS import: an image decoder's own buffers stop counting against the memory budget once it is decoded; EPS import: sampled functions interpolate between their samples; `.ai` and EPS type from the text document keeps its tab stops; it keeps auto leading and hyphenation optionLine truncated
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-11-17 · **Change:** minor (PDF import: a glyph filled only after a glyph filled and stroked comes in filled only, not stroked, #8300; PDF import: translucent type filled and stroked comes in as a filled type object and a stroked one, as the file composites them, and an upright glyph is never kept as the outline of its glyph alone, #8015; PDF import: type filled and stroked by one text-showing operator comes in as one type object, filled and stroked, not a stroked copy over a filled one, #8015; scores and estimates unchanged; previously: PDF import: stroked type keeps the line cap, line join and miter limit the file strokes it with, not butt caps and miter joins, #7741; `.ai` and EPS import: in layers that don't draw as the page, art that differs away from an envelope of type no longer costs it its editable type; it keeps its drawn art where, in the pixels it and its drawn art ink, the layers with it differ from the page more than its own check allows, or past the envelopes' share of the page check, #7141; `.ai` and EPS import: a top-object envelope whose mesh saves its sides' curves in pieces draws its contents along each whole curve, as its drawn art does, #7097; previously: PDF import: glyphs in a span with an empty ActualText come in as outlines, #6971; scores and estimates unchanged; previously: `.ai` and EPS import: type from the text document, type a PostScript program sets and legacy `.ai` type are set in an installed face of their font's PostScript name, exact name first, in the version a text document's record keeps; the `.ai` save writes a static font's version when its name alone gives another copy, #6983; `.ai` and EPS import: type keeps the manual kerning of its text document, #6899; `.ai` and EPS import: type in an envelope with Distort Appearance is also tried mapped from the box of what it paints, its strokes' miter tips and strokes a Transform effect moves included, after its glyphs grown by half its strokes' weight, #6824; `.ai` and EPS import: type filled or stroked with a pattern swatch keeps its pattern, from the art style its text document paint names, #6856; #6865: explicitly requested oversized editing artboard; PDF import: Indic type keeps its marks on their line, and a line whose type would not draw as the file does keeps the file's glyphs as outlines, #5235; previously: newly imported SVG/SVGZ titles are filtered and bounded without changing restored titles, #3626; `.ai` and EPS import, and what every export and `.ai` save draw: type's strokes in an envelope paint at their own weight along its bent outlines, Distort Appearance on or off, #6644; `.ai` and EPS import: centred and right-aligned lines of tracked type are aligned without the tracking after their last character, as the file's page aligns them, #6610; `.ai` and EPS import: an envelope saved in Edit Contents whose mesh lies away from its drawn art by a move opens live on that art, #6570; `.ai` save and open: layer colour presets Yellow, Magenta and Cyan keep their colour, as the `Lb` colour index now follows the file's numbering, #6502; `.ai` save: stroked type keeps its stroke's cap, join and miter limit in the text document, #6472; `.ai` and EPS import, PDF import: tracking and manual kerning in horizontally scaled type take the Horizontal Scale, as the file's page spaces such type; `.ai` and EPS import: stroked type in an envelope maps from its glyphs grown by half its stroke, #3179; `.ai` and EPS import: warps of type open as mesh envelopes on their saved grid, #3179; `.ai` and EPS import: stroked type keeps its stroke's cap, join and miter limit from the text document, #6472; `.ai` save: type in a variable font's named instance names its design-space setting, #6388; `.ai` and EPS import: envelopes of type open live where they draw as their drawn art and the layers with them draw as the page, #3179; `.ai` and EPS import: a note for type in an envelope, #3179; `.ai` and EPS import: the live envelope and warped type check sees white art; PDF import: DeviceN images of one ink or of process plates keep their inks, #6348; `.ai` import: images in a spot ink's Separation space keep their ink, #6350; PDF import: Separation images keep their ink, #6314; PDF editable import preserves authored ActualText once, including empty/nested spans and authored ordering (#6165); cross-line/style layout remains approximate; scores and estimates unchanged; PDF marked-text export (#6309): compatible glyphs stay on one layout line with per-glyph offsets; scores and estimates unchanged; PDF import: image masks open colorized by the color they are painted in, #6313; EPS and `.ai` editing data: a ligature the page names by a private-use glyph matches its text object; EPS import: CIDFonts only named, over a Unicode CMap, set as live type; EPS import: CMap mappings to base-font codes and glyph names; EPS import: CID-keyed fonts in FontSets (CFF) draw their glyphs; EPS import: `kshow` procLine truncated
>
> Oversized artboard import update (2026-11-12): Explicit editing-data import retains a single artboard beyond a capped 14,400 pt PDF page (#6865).
@@ -120,14 +120,39 @@ private editing data. VectorCraft:
Scatter and Art brushes with their art, are written in its order: Scatter and Art brushes in Tints or keeping their
art's colors, Art brushes that run their art from left to right without overlap at a fixed width, with their
width, flips and scale (Stretch Between Guides with guides that leave art between them), and art of paths and
compound paths with points and groups with members, with one solid fill and one plain stroke each. Other brushes,
compound paths with points and groups with members, with one solid fill and one plain stroke each. Such art may
hold opacity masks whose art is of the same kinds, up to seven deep in one another's art; the masks are written
with their options, and an Art brush whose art holds one is written with its strokes as their drawn look. Other
brushes,
Pattern and Bristle brushes among them, and brushes past the number or the art VectorCraft's reader reads are left
out with a warning; no brush is written on a large canvas. A path or compound path with a Calligraphic brush, or
with an Art brush whose art bends along the path and that doesn't scale its art proportionately, keeps the brush
on its stroke; other brushed strokes are
written as their brush's art. A document that uses a new document's brushes writes none until a path keeps one on
its stroke; then the brushes are written, and the file opens without the new document's Pattern and Bristle
brushes.
brushes. Blends are written live: their key objects, their spine when they have one of their own, their steps
drawn, and their spacing (Smooth Color, Specified Steps, Specified Distance) and orientation (Align to Page, Align to
Path); a replaced spine is written with an anchor where each key object sits, so it opens with those anchors and
lays out the same steps. Blends with easing, a color shift or start points, with effects, an appearance or an
opacity mask of their own, of objects other than paths, compound paths and groups, of clipping groups, of more than
62 key objects, with a hidden key object, holding another blend, of key objects with geometry or Pathfinder effects
or a group's own fills and strokes, of key objects the editing copy would change (empty paths or subpaths, paths and
compound path members of several subpaths, several fills or strokes, strokes a plain line can't draw, dashes of
more than 64 lengths, hidden fills or strokes, fills or strokes other than a color, in a Lab color or with
transparency or effects of their own, effects, opacity masks), where one key object has a fill or stroke of no paint
or a stroke of no width and another has one that draws, whose spine has more than one part, whose step count is
close to where rounding changes it, or that VectorCraft's reader wouldn't open with their settings or as they
are drawn, are written as their steps with a warning, as are blends inside objects with geometry or Pathfinder
effects or a group's own fills and strokes, blends in opacity masks, pattern tiles, symbols and art cut to a
clipping object or nested eight levels deep in art written in place of other objects (symbol instances, live
objects, brushed strokes), blends whose art would pass the most objects VectorCraft's reader reads, and every blend
on a large canvas. Gradient meshes are written as meshes: each mesh point's place, color, opacity and handles, patch by
patch; a reflected mesh is written with its columns in reverse order, and opens with each row's points in reverse
order. Meshes with a point in a Lab color, with
more than 128 rows or columns, folded meshes (patches whose corners turn different ways), meshes VectorCraft's reader
wouldn't open as they are drawn, meshes in pattern tiles and in art cut to a clipping object, and every mesh on a
large canvas are written as their drawn look with a warning. In a symbol's art, an envelope's contents are written in
the canvas's space with y down.
Point type, area type (with its rows, columns,
gutters and first baseline, threaded frames included) and type on a path are written as text: a text object for
each, naming its story in the text document, with the characters, fonts, sizes, leading, tracking, baseline shift,
@@ -142,11 +167,12 @@ private editing data. VectorCraft:
clipping object, mirrored type, turned or unevenly scaled area type and type on a path, area type in an open frame,
type on an open path whose ends meet, area type whose wrap cannot be reconstructed from plain saved paths, compound paths or groups, type of only white space, threads of
type on a path, threads whose frames differ in orientation, type and stories past the sizes VectorCraft's reader reads, and
type with inline graphics, ruby, gradient or pattern paint or an appearance or opacity mask of its own, other patterns, other clipping objects and live
type with inline graphics, ruby, gradient or pattern paint or an appearance or opacity mask of its own, other patterns, other clipping objects and other live
objects (placed documents included) are written as plain filled and stroked paths, and freeform gradients, gradients along
or across a stroke and gradients without stops, with more than 256 stops or without extent as their average
color, each with a warning. Gradients that dither or mix their colors perceptually are written as classic
gradients, and gradient stops linked to global process colors as their colors, each with a warning. The opacity
color, each with a warning. Gradients that dither are written without dither's noise, Perceptual gradients and
gradients mixed around the hue wheel as classic gradients of the stops on their curve in process colors (at most
256), and gradient stops linked to global process colors as their colors, each with a warning. The opacity
and blending mode of single fills and strokes, opacity masks on layers, the placement of pattern swatches that
move, turn or scale their pattern, and the effects of objects written without an art style, other than geometry
effects, are left out.
@@ -271,7 +297,7 @@ private editing data. VectorCraft:
### Illustrator's private editing data
The app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; a filled clipping path keeps its fill, which paints under the art it clips, except the path of a mask that covers several layers, whose fill is read as a path of its own in the layer that holds the mask's path, and a compound clipping path whose subpaths paint differently, whose filled subpaths are read as a compound path of their own under the art it clips; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, placed PDF and `.ai` pages as placed documents of the [page and Crop to box](https://helpx.adobe.com/illustrator/desktop/add-and-import-files/import-other-file-types/adobe-pdf-placement-options.html) their dictionary names (`AI11 PlacedPDFPageIndex`, `AI11 PlacedPDFCropTo`; a value VectorCraft doesn't read, or a binding to an image variable, leaves a linked image), guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile on a Stroke Offset stroke or written as each side's widths) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing), Pucker & Bloat at 0 or Bas Relief (read from its settings block: [raster effects reference](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/raster-effects-reference.html), [layered image file format specification](https://www.adobe.com/devnet-apps/photoshop/fileformatashtml/), [scripting the filter gallery](https://community.adobe.com/questions-712/scripting-support-for-the-filter-gallery-1064646)) comes in as itself withLine truncated
The app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; a filled clipping path keeps its fill, which paints under the art it clips, except the path of a mask that covers several layers, whose fill is read as a path of its own in the layer that holds the mask's path, and a compound clipping path whose subpaths paint differently, whose filled subpaths are read as a compound path of their own under the art it clips; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, placed PDF and `.ai` pages as placed documents of the [page and Crop to box](https://helpx.adobe.com/illustrator/desktop/add-and-import-files/import-other-file-types/adobe-pdf-placement-options.html) their dictionary names (`AI11 PlacedPDFPageIndex`, `AI11 PlacedPDFCropTo`; a value VectorCraft doesn't read, or a binding to an image variable, leaves a linked image), guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile on a Stroke Offset stroke or written as each side's widths) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing), Pucker & Bloat at 0 or Bas Relief (read from its settings block: [raster effects reference](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/raster-effects-reference.html), [layered image file format specification](https://www.adobe.com/devnet-apps/photoshop/fileformatashtml/), [scripting the filter gallery](https://community.adobe.com/questions-712/scripting-support-for-the-filter-gallery-1064646)) comes in as itself withLine truncated
A run of type in the editing data whose baseline direction is 1 opens with Standard Vertical Roman Alignment (https://helpx.adobe.com/illustrator/using/formatting-asian-characters.html) on, which is VectorCraft's own mapping: its half-width characters stand upright in vertical type, and horizontal type keeps the mark with no change to its layout. A run whose baseline direction is 2 or 3 (Tate-chu-yoko), or that names none in the run, its character style or the document's defaults, opens with it off. The scripting reference lists 1, 2 and 3 as the Standard, vertical rotated and Tate-chu-yoko baseline directions (https://web.archive.org/web/20170621180804/https://wwwimages.adobe.com/content/dam/Adobe/en/devnet/illustrator/sdk/CC2015_3/Illustrator%20VBScript%20Reference.pdf, page 256).
A Scatter brush in the editing data whose last 15 numbers start with 1 comes into the Brushes panel in Tints. Each brush art section is read without its frame: an unnamed, unpainted rectangle with no settings of its own at the art's bounds (within 1/1000 pt), closed, or open with its first corner again at the end. A wider frame stays in the art, and an art group with a state or look of its own (hidden, locked, isolated, knockout, an opacity, a blend mode, a name, a mask, a note or an appearance) stays a group.
@@ -280,6 +306,8 @@ An object in a pattern's art or in a brush's art takes the file's art styles in
Names in the editing data that aren't UTF-8 (layers, objects, artboards, colors, gradients, patterns, graphic styles, swatches, brushes, symbols, variables and data sets) are read as Windows-1252 unless `legacyNameEncoding` (`convert --legacy-name-encoding`) picks `macintosh`, `windows-949`, `shift_jis`, `gbk` or `big5`; the open result's warnings list the first three such names as read and count the rest. The text values of data sets are read in the same encoding.
Gradient meshes in the editing data keep each point's own color where a patch's corners differ in color model. In a symbol's art, a gradient mesh's corners and an envelope's grid are read in the space an image's matrix is read in there, and an envelope's contents in its dictionary in the canvas's space with y down. In a file without a template box such a mesh or grid is not read, and its symbol's instances open as the page draws them, as with an image there. An envelope in a symbol's art whose grid and contents are in the symbol's own space, as earlier VectorCraft builds wrote them, opens as the art it draws.
## Format by format
| Format | Illustrator | Ours: open/place | Ours: save/export | Fidelity and tests |
@@ -295,11 +323,11 @@ Names in the editing data that aren't UTF-8 (layers, objects, artboards, colors,
| DXF | open, export | yes | yes (R12–2018) | R13–2018 closed SPLINE flags and control-point closure on import verified (#1299); circular cubic paths export as native CIRCLE/ARC where stroke semantics permit; R12 weighted strokes remain POLYLINE while non-circular curves keep the existing fallback (`crates/cad/src/tests.rs`); [Autodesk group 70](https://help.autodesk.com/cloudhelp/2024/ENU/AutoCAD-DXF/files/GUID-E1F884F8-AA90-4864-A215-3182D47A9C74.htm). DXF 2000–2018 LAYOUT objects write the paper image origin as 148/149 (was a stray 158), the shade plot codes (2004+) and the model type flag, and the plot style placeholder carries no subclass marker (#3085; structure test `r2000_and_later_files_have_the_structure_cad_apps_require`, checked with ezdxf's audit; not yet confirmed in Autodesk Fusion). DXF Options' Preset menu and `document.exportDxf`'s `dxfPreset: "cnc"` set the CNC / CAM options (#5500); VCarve QA remains open |
| HP-GL/2 `.plt`, `.hpgl`, `.hgl`, `.hpg` | — | yes (pen moves, pens and widths, line types and attributes, circles, arcs, wedges and Bézier curves, filled and edged rectangles, wedges and polygons, encoded polylines, scaling and rotation; labels, symbol mode, raster images and hatching aren't drawn) | yes (`.plt`: each visible path once along its line, a pen per color or a pen table, type as outlines, clipping applied, HP-GL or HP-GL/2 with pen colors and encoded polylines) | recognized by its first instructions after any printer escapes, under its own extensions or one no other format reads; `crates/cad/src/hpgl/tests.rs`, `crates/cad/src/hpgl/write/tests.rs` (plots read back by the reader), `tests_hpgl.rs`, `import_fuzz.rs` |
| DWG | open, export | no | no | no open spec; DXF instead |
| EMF / WMF | open, export | yes | yes | an oversized embedded PNG or JPEG is refused from its header, before any pixels are decoded (#1776) |
| EMF / WMF | open, export | yes | yes | an oversized embedded PNG or JPEG is refused from its header, before any pixels are decoded (#1776); a picture cut short by a reader limit, images and pattern brushes that are not read, clips that are not applied and raster operations other than a plain copy come back as warnings; tests in `crates/metafile/src/tests/import.rs` |
| PSD | open, place, export | yes (open: layers as layers, or the merged image with `layers: false`; place: merged image, or the layers embedded as a group of objects with `layers: true`; the merged image comes in clipped by the file's clipping path; every mode and depth; `.psd` and `.pdd`) | yes (layered, max editability, point type as editable type layers with `preserveText`; `tests_psd.rs`) | PSD Import Options on File › Open and on File › Place without Link (Convert Layers to Objects, Flatten Layers to a Single Image, Import Hidden Layers, Import Slices; `tests_psdlayers.rs`, `dialogs/psd_import.rs`); slices (image resource 1050, version 6 and the version 7 and 8 descriptor) open and embed as user slices with `importSlices` (`tests_psdslices.rs`); layer comps aren't read; the embedded ICC profile's tags are 4-byte aligned (#1584) |
| PSB | open | yes (layers as layers, or the merged image; the merged image comes in clipped by the file's clipping path) | no | |
| PNG / JPEG / GIF / BMP / TIFF / Targa | open, place, export | yes (PNG: `.png` and `.pns`; BMP: `.bmp`, `.dib` and `.rle`; Targa: `.tga`, `.vda`, `.icb` and `.vst`, raw or run-length encoded, with a 16-bit file's one-bit alpha) | yes; TIFF is also selectable in Export for Screens and Asset Export with its existing options | Targa: `tests_tiffbmp.rs`, `tests/links.rs`; TIFF: grayscale with an alpha channel or other extra channels reads (#1466 in part), and so do files that store each channel as its own plane (PlanarConfiguration 2), CMYK ones with their ink amounts, and 1-bit files compressed with CCITT Group 3 (Compression 2 and 3, one- and two-dimensional rows); the ICC profiles embedded in JPEG and TIFF have 4-byte aligned tags (#1584); PNG export marks its colours as sRGB (`embedIcc`, an `sRGB` chunk; no ICC profile is embedded, #2221) |
| WebP | export (Export for Screens) | yes | yes (lossless only; lossy written lossless with a warning) | |
| WebP | export (Export for Screens) | yes | yes (lossless by default; `lossless: false` writes lossy WebP at `quality` 0–100, default 90) | lossy files are `VP8 `, with an `ALPH` chunk when some pixels are not opaque; `tests_text.rs` |
| JPEG XL `.jxl` | — | yes (first frame; 16-bit and floating-point samples as 8 bits, alpha kept; CMYK refused) | no | decoded with jxl-oxide; the size is checked from the header before decoding; container Exif resolution sizes opened and placed images; tests in `crates/engine/src/cmd/fileio/tests_jxlread.rs` and `crates/engine/tests/import_fuzz.rs` |
| HEIC / HEIF | open, place | yes (HEVC-coded still images: single pictures and grids of tiles, 8 to 10 bits, with an alpha image; image sequences, other codings and grids of cropped tiles are refused) | no | `.heic`, `.heif`; decoded by heic-rs in the engine's default `heif` feature (a build without it refuses the files with a message); the container's rotation, mirror and crop are applied; without an `nclx` box the HEVC stream's video signal type gives the matrix and range; an RGB ICC profile, or Display P3 with the sRGB curve named by an `nclx` box or, without a color box, by the stream, is converted to sRGB; EXIF resolution tags size the image, or 72 ppi; bounded decoding; `tests_heifread.rs` |
| PCX | open, place | yes (1 bit in the header palette's first two colors, black and white without them; 1 bit in two to four planes and 4 bits with up to 16 colors; 2 bits in the CGA colors the header's CGA palette settings pick; 8 bits with the 256-color palette, gray without one; 24-bit color in three planes) | no | the header's HDpi and VDpi size the image; a file of another depth or plane count, cut short or past the pixel allowance is refused with a message; tests in `crates/engine/src/cmd/fileio/tests_pcxread.rs` and `crates/engine/tests/import_fuzz.rs` |
@@ -317,6 +345,15 @@ Names in the editing data that aren't UTF-8 (layers, objects, artboards, colors,
| Affinity `.af`, `.afdesign`, `.afpub` | no | yes (beyond Illustrator) | no (#665) | 51 pinned files, [affinity-validation.md](affinity-validation.md) |
| Clipboard: PDF, SVG, PNG, EMF, text | yes | yes | yes | copied files paste as art; cells copied from a spreadsheet (tab-separated text) paste as a table of point type over gridlines, at most 1000 rows, 256 columns and 20,000 cells (#5296) |
Opaque CMYK PSD/PSB merged images preserve their 8-bit or 16-bit ink samples, CMYK ICC profile, resolution,
and clipping path through placement, relinking, updating, and embedding (#8316). VectorCraft stores these images
as CMYK TIFFs up to its native limit of 67,108,864 pixels and within its allocation allowance. Other CMYK composites
use the RGB import path, subject to its allocation limit; importing individual layers keeps its existing behavior.
Synthetic regressions in
`tests_psdread.rs` cover native samples, compression, metadata, and linked-image operations. The
[public PSD specification](https://www.adobe.com/devnet-apps/photoshop/fileformatashtml/index.html) defines
the CMYK planes and profile and resolution resources.
## PDF form gradients
PDF export's linear and radial gradients stay aligned inside transparency groups, opacity masks,
@@ -333,6 +370,8 @@ Stop opacity on translated artboards remains outside this regression coverage.
- [ ] Exact redistribution of one replacement over several lines/styles, and general mixed-direction paragraph layout. Replacement uses the first placed glyph's line/style. Tags deeper than 128 and replacements over 64 KiB encoded (at most 192 KiB decoded) fall back to glyph mappings with a warning; an outer accepted owner survives deeper tags.
- [x] Stroked type (text rendering modes 1, 2, 5 and 6, with or without `ActualText`) keeps the line cap, line join and miter limit of the graphics state it is stroked with, as paths do; glyphs stroked with another cap, join or miter limit are a run of their own, also a glyph filled and then stroked otherwise than the run its fill joined (#7741, `imported_stroked_type_keeps_the_files_cap_join_and_miter_limit` in `crates/pdf/src/tests/textstroke.rs`). The dash array is not carried to the characters yet.
- [x] Type filled and stroked by one text-showing operator (text rendering modes 2 and 6: the reader fills all of a `Tj` or `TJ`, every string of the array, before it strokes the same glyphs) comes in as one type object, filled and stroked, as it does glyph by glyph; a stroke over no filled glyph (modes 1 and 5, or stroked type of its own) stays stroke only (#8015, `a_word_filled_then_stroked_imports_as_one_filled_and_stroked_type` in `crates/pdf/src/tests/textstroke.rs`, `a_vertical_column_filled_then_stroked_is_one_filled_and_stroked_type` in `crates/pdf/src/tests/text_placement.rs`). Translucent type filled and stroked stays a filled object and a stroked one, as the file composites them apiece (`translucent_fill_and_stroke_text_stays_two_objects`). A glyph filled only right after one filled and stroked (`2 Tr (B) Tj 0 Tr (C) Tj`) joins the same type object filled only, not stroked (#8300, `a_glyph_filled_only_after_one_filled_and_stroked_is_not_stroked`).
- [ ] PDF type filled and stroked at less than full opacity as one type object, and a `TJ` whose kerning starts a new line part way through, filled and stroked: both still come in as a filled object and a stroked one (#8015).
- [x] Place from bytes or unlinked paths, and PDF clipboard paste, keep the selected page's live text. Synthetic two-page regressions in `crates/engine/src/cmd/fileio/tests_pdffidelity.rs` cover both sources, page selection and explicit outlines. The single-page importer honors the same text choice as Open; existing PDF fallback rules are unchanged.
@@ -344,6 +383,9 @@ Stop opacity on translated artboards remains outside this regression coverage.
| Date | Change | Summary |
|---|---|---|
| 2026-11-17 | minor | PDF import (#8300): a glyph filled only (text rendering mode 0) right after one filled and stroked (mode 2) joined the stroked run and came in stroked too: `2 Tr (B) Tj 0 Tr (C) Tj` came in as `BC` stroked throughout. A glyph filled only now joins only a run drawn alike, so it starts a run of its own, filled only, in the same type object, and takes a stroke only when the file draws one over it (the #8015 matching); a word filled whole then stroked whole, and fill and stroke rendering glyph by glyph, still come in as one run filled and stroked. Tests: `a_glyph_filled_only_after_one_filled_and_stroked_is_not_stroked`, `glyphs_filled_and_stroked_one_by_one_stay_one_run`; scores and estimates unchanged. |
| 2026-11-17 | minor | PDF import (#8015 follow-up): type filled and stroked at less than full opacity is no longer joined into one type object, since the file composites the fill and the stroke apiece, darker where they overlap, while one object's opacity applies to both together; it stays a filled object and a stroked one, as a fill and stroke at different opacities already did. An upright glyph (vertical type) filled and stroked is no longer kept as an outline for a line that comes in as its outlines, as glyphs filled only weren't, so such a line can't lose them. The #8015 entries now say what is left: translucent type filled and stroked, and a `TJ` whose kerning starts a new line part way through, still come in as two objects. Tests: `translucent_fill_and_stroke_text_stays_two_objects`, `a_vertical_line_with_one_glyph_filled_and_stroked_keeps_every_glyph_filled`; scores and estimates unchanged. |
| 2026-11-16 | minor | PDF import: fill and stroke rendering (text rendering modes 2 and 6) draws all the glyphs of a text-showing operator (`Tj`, `TJ`, `'`, `"`) filled, then the same glyphs stroked, so a word shown at once came in as two type objects: a stroke-only copy over a fill-only one. Each stroke is now matched, in order, to the glyph filled with the same placement (where, how large, how wide, slanted and turned) in the same font with the same text on the line, and only that glyph takes the stroke, so the word comes in as one type object, filled and stroked; glyphs stroked with another join part way through still split into runs of their own, and stroked type over no filled glyph (modes 1 and 5) stays stroke only (#8015; `a_word_filled_then_stroked_imports_as_one_filled_and_stroked_type` in `crates/pdf/src/tests/textstroke.rs`, `a_vertical_column_filled_then_stroked_is_one_filled_and_stroked_type` in `crates/pdf/src/tests/text_placement.rs`). Scores and estimates unchanged. |
| 2026-11-15 | minor | PDF import: stroked type (text rendering modes 1, 2, 5 and 6, and glyphs under `ActualText`) came in with butt caps, miter joins and a miter limit of 10 whatever the file stroked it with, while paths kept the graphics state's. The characters' stroke now takes the line cap (`J`), line join (`j`) and miter limit (`M`) of the graphics state, as a path's stroke does, and glyphs stroked with other ones start a run of their own, also a glyph filled and then stroked otherwise than the run its fill joined, so the glyphs before it keep their stroke (#7741). Test `imported_stroked_type_keeps_the_files_cap_join_and_miter_limit` in `crates/pdf/src/tests/textstroke.rs`. Scores and estimates unchanged. |
| 2026-11-13 | minor | `.ai` and EPS import: layers that don't draw as the page, even with the drawn art of every live envelope put back, no longer put back the drawn art of every envelope of type. Each live envelope of type is weighed in the page check's own drawing of the pages it lies on, on the pixels that it and its drawn art ink there (the two drawn together on a layer of their own, without the rest of the layers; a pixel inks with an alpha above 8 of 255): it keeps its drawn art and its type, hidden, with the note, where the layers with it differ from the page in more of those pixels than its own check allows against its drawn art (10% of them, or 3% differing with all their neighbours, away from type), or where the envelopes of type that stay live, in the order they were read, would together differ there in more of a page than half of what the page check allows (a budget of the same size as the one their own checks share, kept apart from it). Art that differs elsewhere on the page no longer costs them their editable type; art that differs on their pixels still does. An envelope of type that a clip group or a clipping sublayer clips, an opacity mask masks, or a group with an appearance of its own, another envelope, a repeat or a blend holds keeps its drawn art as before, wherever it lies: drawn on its own it would be weighed elsewhere than it draws, and what holds it can draw it onto the page from off it. An envelope on no page stays live, as the page check doesn't see it, unless the page holds all the art that prints (an EPS's page that is its art's box, where art past the page is compared too): there one reaching past the page keeps its drawn art. Past 12 of them on the pages, all keep it. This holds where the editing data is trusted, where the objects that differ come in as the page's art (the placed files' other placement weighed on its own, as it draws them elsewhere under or over the envelopes; layers that draw as the page with only the envelopes the page holds put back are used as they are; where none of the objects that differ can then come in as the page's art, because an object holds type, the drawn art of every envelope of type is put back and that is tried again, as before), and for a `.ai` whose layers would open alone, which still opens alone: its envelopes of type are all settled again as they were with the page, in the same order and with the same checks, so each that opens live draws as it was weighed, and those the page held get their drawn art back. Where putting the drawn art of every live envelope back makes the layers draw as the page, it is still put back (#5065). In 224 users' files (used locally, never committed): envelopes of type that open live go from 174 to 186, in 8 files, none fewer in any file; no file changes between its layers and its PDF part; 7 renders change, by at most 0.7% of their pixels at 40 ppi (1 closer to the page, 1 alike, 5 further, by at most 0.7 of a percentage point, where VectorCraft's own envelope draws a little apart from the drawn art, within its check); the note for type in an envelope goes from 6 files. Of the 14 envelopes of type that had opened live and lost it to the page check, 2 keep their drawn art: one where the page draws something else where it is, and one in a file that comes in as its PDF part (#7141). Tests `build::candidate_tests::the_page_holds_back_only_envelopes_of_type_where_it_differs_from_them`, `envelopes_of_type_stay_live_within_half_of_what_the_page_check_allows`, `an_envelope_of_type_differing_in_more_of_its_pixels_than_its_check_allows_is_held_back`, `envelopes_of_type_the_layers_dont_draw_in_place_are_held_back`, `on_a_page_that_holds_all_the_art_an_envelope_of_type_past_it_is_held_back`, `objects_come_in_as_the_page_art_with_every_envelope_of_type_put_back_where_a_live_one_holds_a_difference`, `tests_native::layers_that_would_open_alone_keep_an_envelope_of_type_live_where_other_art_differs_from_the_page`, `layers_that_would_open_alone_keep_live_only_the_envelopes_of_type_the_page_doesnt_hold`, `trusted_layers_that_would_open_alone_open_alone_with_an_envelope_of_type_the_page_doesnt_hold_live`, `layers_with_objects_that_come_in_as_the_page_art_keep_an_envelope_of_type_that_draws_as_the_page_live`, `trusted_layers_keep_an_envelope_of_type_live_where_other_art_differs_from_the_page`, `trusted_layers_leave_an_envelope_of_type_the_page_draws_otherwise_its_drawn_art`, `build::candidate_tests::the_other_placement_of_placed_files_is_weighed_on_its_own`, `layers_that_draw_as_the_page_with_the_held_envelopes_of_type_put_back_are_used_so` |
| 2026-11-13 | minor | PDF import: glyphs inside a marked-content span with an empty `ActualText` come in as outlines in their fill and stroke instead of being left out, adding no text (#6971; `empty_actual_text_keeps_the_glyphs_art` in `crates/pdf/src/tests/actual_text.rs`). Scores and estimates unchanged. |
+14 -9
View File
@@ -420,6 +420,8 @@ macOS cursor delivery (#2292) is narrowed to a native host adapter using the exi
- **Improved:** hanging punctuation (Roman Hanging Punctuation and Optical Margin Alignment) keeps its published amounts when justification scales glyphs, and Standard burasagari counts a hung line start as room; paragraph-level tests with both composers; estimate unchanged.
- **Done:** Paragraph panel menu › Justification… (#2755): word and letter spacing, glyph scaling (Minimum, Desired,
Maximum), Auto Leading and Single Word Justification per paragraph, used by both composers; estimate unchanged.
- **Done:** type on a path takes each paragraph's Justification… Desired word spacing, letter spacing and glyph
scaling, as point and area type do; estimate unchanged.
- **Done:** a paragraph's Auto Leading also sets the Leading the Character panel shows for Auto type, the leading the
Alt+↑/↓ nudge steps from and the lines Fill with Placeholder Text counts; estimate unchanged.
- **Missing:** CJK vertical
@@ -460,7 +462,7 @@ macOS cursor delivery (#2292) is narrowed to a native host adapter using the exi
- **Done:** COLR and SVG glyphs go with type that geometry effects reshape, into Expand Appearance and EMF/WMF
export, where the type's outlines used to leave them out; bitmap glyphs (emoji) too, as images that hold their
own pixels until a document takes them in; estimate unchanged.
- **Done:** spell check (#4936): engine (`text.spelling.check` and `text.spelling.suggest` on craft-proof); custom dictionary and Ignore All (`text.spelling.addWord`, `removeWord`, `changeWord`, `dictionary`, `ignoreAll`); Auto Spell Check (`edit.autoSpellCheck`) with red wavy underlines and canvas context menu suggestions, Ignore All and Add to Dictionary; Edit › Edit Custom Dictionary…; and modal Check Spelling dialog (Edit › Spelling › Check Spelling…, `ui.checkSpelling`) with sentence context, suggestions list, "Change to" edit, Ignore, Ignore All, Change, Change All, Add to Dictionary, Done, Cancel, and keyboard navigation. Estimate unchanged.
- **Done:** spell check (#4936): engine (`text.spelling.check` and `text.spelling.suggest` on craft-proof); custom dictionary and Ignore All (`text.spelling.addWord`, `removeWord`, `changeWord`, `dictionary`, `ignoreAll`); Auto Spell Check (`edit.autoSpellCheck`) with red wavy underlines and canvas context menu suggestions, Ignore All and Add to Dictionary; Edit › Edit Custom Dictionary…; and modal Check Spelling dialog (Edit › Spelling › Check Spelling…, and Spelling › Check Spelling… in the canvas context menu of type, `ui.checkSpelling`) with sentence context, suggestions list, "Change to" edit, Ignore, Ignore All, Change, Change All, Add to Dictionary, Done, Cancel, and keyboard navigation. Estimate unchanged.
- **Missing:** CJK vertical
composition (custom mojikumi sets and the Mojikumi Settings dialog, kinsoku settings #633, manual tate-chu-yoko), Middle Eastern
features beyond bidi, digit types, Character Direction and Kashidas (a split caret; the Middle Eastern & South Asian composers are done, #4935),
@@ -474,7 +476,7 @@ macOS cursor delivery (#2292) is narrowed to a native host adapter using the exi
- **Implemented and tested (2026-11-15):** Swatches list rows and thumbnail cells have item context menus with Swatch Options…, Duplicate Swatch and Delete Swatch. Right-click selects the target without painting art; actions use that item's name and are disabled for reserved or missing swatches. All 39 Swatches tests pass, covering all five views, command dispatch, selection and Undo; the regression fails with the menu hooks removed. Rendered list and thumbnail menus were inspected. Full workspace CI passed on Linux/WSL on the merged branch (all 13 gates), including the test-helper correction for the upstream compile error tracked in #7727; native Windows full CI has two unchanged engine-test failures. Other panels without context menus remain in G12; estimate unchanged.
- **Done (2026-11-14):** Symbols panel context menu: right-click on a symbol in thumbnail or list view displays a context menu with Place Symbol Instance, Edit Symbol, Duplicate Symbol, Delete Symbol, Break Link to Symbol (enabled when canvas selection includes instances of the symbol), and Select All Instances, selecting the symbol if unselected. Estimate unchanged.
- **Done (2026-10-29, #4522):** the Pathfinder panel menu's Make, Release and Expand Compound Shape, which were dimmed placeholders, and the panel's Expand button act on live compound shapes ([Create compound shapes with Pathfinder](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/create-compound-shapes-with-pathfinder.html)): Alt-clicking a Shape Mode makes one in that mode, a Shape Mode sets the mode of the members selected, and the compound shape draws, exports and saves as the area its members' modes make (`object.compoundShape.*`, `crates/engine/src/tests/compound_shape.rs`). Left: blends, envelopes and warps as members, question marks on the buttons for mixed member modes, clicks that hit the area rather than the members. Estimate unchanged.
- **Done (2026-10-29, #4522):** the Pathfinder panel menu's Make, Release and Expand Compound Shape, which were dimmed placeholders, and the panel's Expand button act on live compound shapes ([Create compound shapes with Pathfinder](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/create-compound-shapes-with-pathfinder.html)): Alt-clicking a Shape Mode makes one in that mode, a Shape Mode sets the mode of the members selected, and the compound shape draws, exports and saves as the area its members' modes make (`object.compoundShape.*`, `crates/engine/src/tests/compound_shape.rs`). Left: blends, envelopes and warps as members, clicks that hit the area rather than the members. Estimate unchanged.
- **Done (2026-10-25, #3426):** Pathfinder panel › Pathfinder Options… ([Pathfinder panel overview](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/pathfinder-panel-overview.html)): Precision (0.001–10 pt; results are refit to within it and pieces thinner than it are dropped), Remove Redundant Points and Divide and Outline Will Remove Unpainted Artwork (pieces of objects with no fill), kept in the preferences (`object.pathfinder.options`, group `pathfinder`) and used by every Shape Mode and Pathfinder button and Repeat; the page gives no defaults, so ours (0.01 pt, both off) keep the earlier results byte for byte. Trap is left as it was. Estimate unchanged.
- **Done (2026-10-25):** Artboards panel › Delete Empty Artboards ([Delete artboards](https://helpx.adobe.com/illustrator/desktop/create-manage-artboards/add-edit-artboards/delete-artboards.html), [artboard context menu](https://helpx.adobe.com/illustrator/desktop/create-manage-artboards/organize-manage-artboards/use-artboard-context-menu.html)): `artboard.deleteEmpty` deletes every unlocked artboard with no artwork, with its guides, in one undo step, and keeps artboard 1 when every artboard is empty and none is locked; an artboard is empty when no object (hidden, locked and template art included; guides not) has visual bounds that meet or touch it, a group counting by its members and a clip group or clipping layer by its members inside the clip (our reading of "no artwork"; the pages give no finer rule). The Artboard tool's canvas context menu lists it too. Estimate unchanged.
- **Done (2026-10-25):** the Transform panel menu's Transform Object Only, Transform Pattern Only and Transform Both
@@ -488,8 +490,8 @@ macOS cursor delivery (#2292) is narrowed to a native host adapter using the exi
Until a choice is made (`default`), the panels follow General › Transform Pattern Tiles as before, and the menu
checks Transform Both while it is on and Transform Object Only while it is off; a choice overrides it.
Estimate unchanged.
- **Done (2026-10-21, #394):** General › Constrain Angle turns the arrow keys' axes (guides stay on the page's), holds Shift drags of the Selection, Direct Selection, Free Transform, Slice Selection, Reshape and Measure tools and the Pen's handles to the turned axes, and new rectangles, rounded rectangles, ellipses, grids, point and area type, Shift-drawn polygons and stars and the shape size dialogs are drawn along it with their bounding box turned; 0° and whole turns are exactly as before, quarter turns exact (<https://helpx.adobe.com/illustrator/desktop/manage-objects/arrange-objects/rotate-objects-by-specific-angles.html>). Spirals, flares and the Pen's new paths are not turned yet. Estimate unchanged.
- **Done (2026-10-21, #394):** General › Constrain Angle turns the arrow keys' axes (guides stay on the page's), holds Shift drags of the Selection, Direct Selection, Free Transform, Slice Selection, Reshape and Measure tools and the Pen's handles to the turned axes, and new rectangles, rounded rectangles, ellipses, grids, point and area type, Shift-drawn polygons and stars and the shape size dialogs are drawn along it with their bounding box turned; 0° and whole turns are exactly as before, quarter turns exact (<https://helpx.adobe.com/illustrator/desktop/manage-objects/arrange-objects/rotate-objects-by-specific-angles.html>). Spirals, flares and the Pen's new paths are not turned yet. Estimate unchanged. **2026-10-24:** General › Corner Radius is the Rounded Rectangle tool's radius: the tool takes the preference when chosen and when it changes while the tool is active (or lent a selection tool for a drag), and the radius ↑/↓ set while drawing one, or a Tool Options value, becomes the preference, clamped to its 0–1296 pt range (<https://helpx.adobe.com/illustrator/using/drawing-simple-lines-shapes.html>). Estimate unchanged.
- **Done (2026-10-21, #394):** General › Constrain Angle turns the arrow keys' axes (guides stay on the page's), holds Shift drags of the Selection, Direct Selection, Free Transform, Slice Selection, Reshape and Measure tools and the Pen's handles to the turned axes, and new rectangles, rounded rectangles, ellipses, grids, point and area type, Shift-drawn polygons and stars and the shape size dialogs are drawn along it with their bounding box turned; 0° and whole turns are exactly as before, quarter turns exact (<https://helpx.adobe.com/illustrator/desktop/manage-objects/arrange-objects/rotate-objects-by-specific-angles.html>). Flares and the Pen's new paths are not turned yet. Estimate unchanged.
- **Done (2026-10-21, #394):** General › Constrain Angle turns the arrow keys' axes (guides stay on the page's), holds Shift drags of the Selection, Direct Selection, Free Transform, Slice Selection, Reshape and Measure tools and the Pen's handles to the turned axes, and new rectangles, rounded rectangles, ellipses, grids, point and area type, Shift-drawn polygons and stars and the shape size dialogs are drawn along it with their bounding box turned; 0° and whole turns are exactly as before, quarter turns exact (<https://helpx.adobe.com/illustrator/desktop/manage-objects/arrange-objects/rotate-objects-by-specific-angles.html>). Flares and the Pen's new paths are not turned yet. Estimate unchanged. **2026-10-24:** General › Corner Radius is the Rounded Rectangle tool's radius: the tool takes the preference when chosen and when it changes while the tool is active (or lent a selection tool for a drag), and the radius ↑/↓ set while drawing one, or a Tool Options value, becomes the preference, clamped to its 0–1296 pt range (<https://helpx.adobe.com/illustrator/using/drawing-simple-lines-shapes.html>). Estimate unchanged.
- **Done (2026-10-17):** Background Export shows its progress in a dialog with Cancel and Continue in Background (#2564), on the shared cancel token (#2546); a cancelled export writes no file. Save As, Export for Screens and Export Selection don't show it yet. Estimate unchanged. **2026-11-06:** opening a file that takes longer than 0.4 s shows a progress window too, with a moving bar, Cancel and Continue in Background (part of #5930); Save and Place still show only the status bar's spinner. Estimate unchanged.
- **Done:** quick Image Trace presets trace at once and leave the panel as it was; the Image Trace button (Control bar, Properties) opens the controls with Threshold and Advanced (Paths, Corners, Noise), as the public documentation describes (<https://helpx.adobe.com/illustrator/using/image-trace-results-optimization.html>). Other context-specific Properties gaps remain.
- **Done (2026-10-31, #394):** Units › East Asian Type is read, and Q and Ha are units. 1 Q and 1 Ha are each a
@@ -515,8 +517,9 @@ macOS cursor delivery (#2292) is narrowed to a native host adapter using the exi
afterwards opens in a floating window of its own (G7's Float in Window); documents already open stay where they
are. Estimate unchanged.
- **Done:** Hyphenation › Default Language is the language of new type, unless Document Setup chose one, and each
run hyphenates in its own language (Character panel). English and eleven Indian languages have break
points; other languages stay whole apart from the Exceptions list (#394, #4947).
run hyphenates in its own language (Character panel). English, eleven Indian languages, Bulgarian, Turkish
and Russian have break points, and German, Polish, Portuguese and Italian have them in builds that embed
their patterns; other languages stay whole apart from the Exceptions list (#394, #4947).
- **Done (2026-11-14):** Layers panel row context menu: right-clicking a layer, group, or object row shows a context menu (Options…, Duplicate, Delete, Lock Others / Unlock All, Hide Others / Show All, Locate Object, Collect for Export) with proper selection behavior and Undo/Redo tracking. Tests in `crates/ui-egui/src/panels/layers/tests.rs`.
- **Missing:** 2 Preferences options stored but not acted on (#394), each waiting on a subsystem of its own:
Plug-ins & Scratch Disks › Primary and Secondary (documents are kept in memory; nothing pages to
@@ -555,8 +558,9 @@ macOS cursor delivery (#2292) is narrowed to a native host adapter using the exi
(`object.intertwine.arrange` with `order` front, forward, backward or back;
<https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/create-intertwined-objects.html>).
The group renders, saves and exports through its live expansion; an object brought over another shows no hairline
of the one below along that object's edges (#5337). Still missing: adding objects to the group by
dragging them in the Layers panel is untested.
of the one below along that object's edges (#5337). Objects dragged into the group in the Layers panel become
members (`layer.move`), and a group left with one member by a drag out is replaced by that member (or a plain group
of it, when the group has an appearance of its own).
- **Done (from users' reports):** Object › Create Gradient Mesh on an embedded image turns it into a mesh over its
rectangle, with the image's transform kept; each point takes the average colour and opacity of the picture around it
(#1676). A linked image is refused, as the public documentation has it.
@@ -700,7 +704,8 @@ macOS cursor delivery (#2292) is narrowed to a native host adapter using the exi
Extrude & Bevel, Inflate and Rotate with Position presets ([three-d.md](three-d.md), #1407). Colored Inflate has automatic smooth vector lighting from shared membrane normals. White-light Inflate keeps its polygon shading. Every 3D facet's seam has round joins ([three-d.md](three-d.md#seams)). All four take one to ten colored directional lights, with neutral ambient applied once, a light list and independent previewing controls. Standard, Diffuse, Top Left and Right select original rigs, shared with commands; manual settings show Custom.
- **Missing:** materials (base, Substance, graphics), shadows,
ray-traced rendering, angular cut caps, exact visibility for intersecting and concave surfaces, the rest of 3D
Classic (Map Art), Turntable, textures, map art and shading in 3D export.
Classic (Map Art), Turntable, and in 3D export the graphics on Revolve's side, materials and shading (graphics on
planes and Extrude & Bevel's caps are exported as textures).
- **Impact:** specialist; Materials is the one menu stub left.
- **Estimate:** 25–45 h; plan in `plan/` before coding.
+37 -22
View File
@@ -23,7 +23,10 @@ versions. Among those presets, Corners is 100 in Technical Drawing, 75 in Defaul
Logo, Line Art and Outline, and 50 in the other eight. Noise is 1 px in Technical Drawing, 5 in High Fidelity Photo and Black and White Logo, 8 in 6 Colors
and 16 Colors, 10 in Low Fidelity Photo, 15 in 3 Colors and Shades of Gray, 20 in Sketched Art, Line
Art and Outline, 25 in Default, and 90 in Silhouettes (see
[image-trace-quality.md](image-trace-quality.md#preset-paths-corners-and-noise)).
[image-trace-quality.md](image-trace-quality.md#preset-paths-corners-and-noise)). High Fidelity Photo
traces with Palette › Full Tone at Color detail 85 and Method › Abutting (VectorCraft's own values; see
[image-trace-quality.md](image-trace-quality.md#high-fidelity-photo-in-full-tone)); Low Fidelity Photo
traces with a Limited palette of 20 colors, Overlapping.
Sliders apply on release, and their numeric fields can be edited directly. Each committed
adjustment re-traces the selected object as one undo step and changes the preset to Custom.
@@ -83,9 +86,9 @@ leaves out every white area whatever `ignoreBackground` is.
color nearest to it in lightness and hue, with a difference in hue or chroma counted three times
as much as one in lightness, so a gray or a muted brown takes a black, white or other neutral
library color rather than a saturated color of the same lightness.
**Abutting and Overlapping.** Abutting is the default Method, and the Default, Auto Color, 3 Colors,
6 Colors and 16 Colors presets use it. With Abutting, two neighboring colors share one exact edge. The
canvas smooths the edges of each path on its own, so each of the two paths covers only part of the
**Abutting and Overlapping.** Abutting is the default Method, and the Default, Auto Color, High Fidelity
Photo, 3 Colors, 6 Colors and 16 Colors presets use it. With Abutting, two neighboring colors share one
exact edge. The canvas smooths the edges of each path on its own, so each of the two paths covers only part of the
pixels along that edge, and a thin line of the background can show between the colors. Web browsers
and PDF viewers usually draw an exported SVG or PDF file the same way and show the same line. Raster
exports (PNG, JPEG, TIFF and the other bitmap formats) with None anti-aliasing do not show it at any
@@ -123,29 +126,41 @@ lies on an edge between them and that blend lies nearer the pixel than the blend
The pixel lies on such an edge when, along the line between the outer two colors, it reaches a pixel
darker than the middle color in at most 5 steps, each to the neighbor that lies farthest toward the
darker color while the pixels keep getting darker, and reaches a pixel lighter than the middle color the
same way. A blend lies as near the pixel as the farther of its colors' nearest flat areas within 6
pixels. The blend of the outer two also lies as near as the larger of the two step counts to a pixel of
each outer color, when that number is smaller.
same way. When the first step toward one outer color comes to a pixel that is less than half as far from
that color as from any other traced color, the path toward the other outer color stops at the first
pixel within 4 levels (out of 255) of the middle color that it comes to before it gets past the middle
color. A blend lies as near the pixel as the farther of its colors' nearest flat areas within 6 pixels.
The blend of the outer two also lies as near as the larger of the two step counts, when that number is
smaller. Each path counts its steps to the first pixel past the middle color that is less than half as
far from that path's outer color as from any other traced color.
A black disc beside a gray square on white traces with one gray shape, the square, and no gray slivers
around the disc, when its edges are sharp or blurred by up to 2 pixels, with the colors found or named.
With the colors named and edges blurred by 3 pixels, a gray of 128 is still one shape, a gray of 200
leaves 4 slivers with no area, and a light gray (230) leaves 8 slivers of up to 21 pixels. An image with
noise of a level or more in its pixels can still leave gray slivers along the disc.
A light gray (230) blurred by 1.5 pixels leaves up to 4 slivers of up to 3 pixels. With the colors named
and edges blurred by 3 pixels, a gray of 128 is still one shape, a gray of 200 leaves 4 slivers with no
area, and a light gray leaves 8 slivers of up to 21 pixels. An image with noise of a level or more in its
pixels can still leave gray slivers along the disc.
With sharp edges, a gray stroke two or three pixels wide beside black has no darker pixel next to it and
stays gray, and so does a gray band along black. On edges blurred by a pixel or more, gray near black
loses some of its pixels. A soft-edged gray band up to 4 pixels wide lying along black traces as black
and white at blurs of 1.5 and 2 pixels, and so does one up to 3 pixels wide at blurs of 1 and 3 pixels; a
wider band loses some of its pixels next to black, and one 8 pixels wide keeps at least half of its gray
at blurs of 1.5 and 2 pixels. A soft-edged gray stroke 2 pixels from black can lose some or all of its
gray, one 4 pixels from black loses a few pixels (a light gray stroke 2 pixels wide, blurred by 1.5
pixels, keeps 28 of 34), and the pixels of one 6 pixels or more from black do not reach black in 5 steps
and are not read as an edge of black and white. A soft-edged gray
stroke 2 or 3 pixels wide running straight out of black, blurred by 1 or 1.5 pixels, loses 3 or 4 of
the 16 pixels nearest black. A soft-edged gray stroke about two
pixels wide that touches black traces as black and white, and one about three pixels wide that touches
black can lose most or all of its gray when it is short (12 pixels long or less). A line of gray one
stays gray, and so does a gray band along black. The counts below are of pixel centers that trace gray.
With edges blurred by 0.6 pixels, as by ordinary anti-aliasing, a gray band 3 to 8 pixels wide along
black traces gray at no fewer than 4 of every 5 of its pixel centers. On edges blurred by a pixel or
more, gray near black traces gray at fewer of its pixel centers. A soft-edged gray band along black
traces as black and white, with gray at no more than 1 of every 16 of its pixel centers, when it is up
to 4 pixels wide at blurs of 1.5 and 2 pixels, up to 3 pixels wide at a blur of 3 pixels, or 2 pixels
wide at a blur of 1 pixel. A wider band loses some or most of its gray next to black. Bands 3 and 4
pixels wide blurred by 1 pixel trace gray at about 60 of their 336 pixel centers (over grays of 230, 200
and 128), bands 4 pixels wide blurred by 3 pixels at about 39 of 192, and a band 8 pixels wide at no
fewer than half of its pixel centers at blurs of 1 to 3 pixels. A light gray stroke 2 pixels wide,
blurred by 1.5 pixels, traces gray at about 10 of the 34 pixel centers along its middle when it lies 2
pixels from black and at about 25 when it lies 4 pixels away. At 6 or 8 pixels from black it traces gray
at all 34: its pixels do not reach black in 5 steps and are not read as an edge of black and white. A
soft-edged gray stroke 2 or 3 pixels wide running straight out of black, blurred by 1 or 1.5 pixels,
loses 3 or 4 of the 16 pixel centers along its middle nearest black. Blurred by 2 pixels, one 3 pixels
wide loses 2 or 3 of them, and one 2 pixels wide traces as black and white along its whole length. A
soft-edged gray stroke about two pixels wide lying along black traces as black and white, and one about
three pixels wide lying along black can lose most or all of its gray when it is short (12 pixels long or
less). A line of gray one
pixel wide between black and white stays gray when at least 13 of its pixels touch: such a line and a
straight black-to-white edge whose pixels are as light as the gray give the same pixels, and both
trace as gray. A one-pixel gray line between black and white that is shorter than 13 pixels, falls
+46 -3
View File
@@ -83,8 +83,9 @@ gradient, texture, sensor noise):
Photo trace was 86,000 anchors under the old limit; a noisier scan of the same size would have been
refused. At 8,000,000 anchors a trace keeps about 0.7 GB, with a peak of about 0.9 GB while tracing.
The preset rows were measured with the earlier preset values: High Fidelity Photo at Paths 90, Corners 25
and Noise 4, Low Fidelity Photo at Paths 60, Noise 12 and 16 Colors at Paths 70, Corners 55 and Noise 10
(see [Preset Paths, Corners and Noise](#preset-paths-corners-and-noise)).
and Noise 4 with a Limited palette of 64 colors and Overlapping, Low Fidelity Photo at Paths 60, Noise 12
and 16 Colors at Paths 70, Corners 55 and Noise 10 (see [Preset Paths, Corners and
Noise](#preset-paths-corners-and-noise) and [High Fidelity Photo in Full Tone](#high-fidelity-photo-in-full-tone)).
## Collapsed loops keep few segments
A small closed loop (or a piece that returns to its own junction) whose fit collapsed to a single
cubic cannot stay as one, so it kept every positioned point as a straight segment. A looser Paths
@@ -250,7 +251,8 @@ Every built-in preset other than Auto Color and Flat Logo traces at Paths 50. Co
The palettes, color counts, thresholds and other options of the presets did not change. The enhanced
versions of these presets use the same Paths, Corners and Noise. 6 Colors and 16 Colors were at Noise 15
and Black and White Logo at 25 until [Noise joins the nearest color](#noise-joins-the-nearest-color);
the measurements below were made at those values.
the measurements below were made at those values. High Fidelity Photo's palette and Method changed
later (see [High Fidelity Photo in Full Tone](#high-fidelity-photo-in-full-tone)).
Measured with the harness below (section 1, each preset on the inputs it is meant for), before and after:
anchors fall in 10 of the 12 changed presets, for example 5,494 to 3,136 (High Fidelity Photo), 33 to 27
@@ -271,6 +273,47 @@ the other sections of this file, and in the Image Trace entries of
[target-app-parity.md](target-app-parity.md), were measured at the earlier values.
Test: `presets_have_their_paths_corners_and_noise` in `crates/trace/src/tests.rs`.
## High Fidelity Photo in Full Tone
High Fidelity Photo traces with Palette › Full Tone at Color detail 85 and Method › Abutting. It traced
with a Limited palette of 64 colors, Overlapping, before. Paths, Corners and Noise stay 50, 50 and 5.
These are VectorCraft's own values. Low Fidelity Photo keeps its Limited palette of 20 colors.
Palette › Full Tone splits its colors until none spans more than its width limit. Then, while it has
fewer colors than Color detail's value (85 at 85), it splits the narrower ones too, where the image has
that many colors. The colors that look alike merge after that, and a merged color can merge again, so a
trace can end with far fewer colors than that count: a gray-to-green ramp 256 px wide with up to 8 levels
of grain a channel ends with 6 colors at Color detail 85, where the RGB test leaves 4. Full Tone's colors
merge when they are thoroughly mixed and less than 5 apart in Oklab × 100, or mixed in patches
(compression blocks) and less than 1.5 apart. The other palettes, Automatic included, keep the RGB test
(under 30 levels and thoroughly mixed, or under 12 and mixed in patches), and Automatic's continuous-tone
colors do not take the least count. These rules apply to every trace with Palette › Full Tone, so an
existing Full Tone trace or saved preset traces differently when it is traced again.
On 19 photos, cartoons and synthetic shapes of 400 to 4,000 px, the mean pixel difference summed over the
inputs fell from 80.5 to 65.6 levels. It fell by more than 1% on 14 inputs (2.88 to 2.19 and 2.59 to 2.48
on two photos, the second a JPEG at quality 40; 1.88 to 1.45 on a 4000 × 3000 photo; 12.40 to 7.44 on an
upscaled cartoon) and changed by less than 1% on the other 5. Anchors rose 1.66 times (1.98 million to
3.29 million) and the SVG size 1.31 times. The trace time rose 1.7 times (18.9 to 31.5 s for all 19, with
both builds tracing 3 images at a time in the same run). Flat synthetic art costs the most: 12 to 400
anchors on a 4000 × 3000 image of two flat colors, and about 3 times the anchors on two images of
synthetic shapes (400 × 300 and 1600 × 1200), with the same pixel difference. A flat gray 192 × 128 with
up to 3 levels of grain a channel traces as 25 colors and 244 anchors, where the Limited palette of 64
traced 1 color and 4 anchors; with up to 5 or 8 levels both trace it as 25 to 37 colors, on each of the
grays tested (28, 60, 128 and 200).
In the same run, peak memory fell on 16 of the 19 inputs, for example 906 to 625 MiB on a 1536 × 2048
cartoon, and rose on 3 small ones (by 5 to 11 MiB). Abutting accounts for the fall: the earlier preset
with Method › Abutting peaked at 523 MiB on the same cartoon, against 924 MiB with Overlapping, in another
run. Low Fidelity Photo, 16 Colors, 6 Colors, Black and White Logo and Auto Color give byte-identical
SVGs. On three flat colors stored in 8 × 8 blocks, each block off by up to 8 levels a channel, High
Fidelity Photo traces 3 colors as 3 paths; without the patch rule it traced 7 colors as 74 paths.
Tests: `high_fidelity_photo_traces_in_full_tone`, `full_tone_keeps_more_of_a_noisy_ramps_tones`,
`full_tone_traces_a_noisy_dark_ground_like_a_light_one` and
`full_tone_merges_a_flat_colors_compression_blocks` in `crates/trace/src/tests.rs`,
`full_tone_merges_only_mixed_colors_that_look_alike` in `crates/trace/src/quantize.rs`, and
`full_tone_makes_one_color_per_step_of_color_detail` in `crates/trace/src/quantize/palette.rs`.
## A simpler contour walk
`contour::trace_mask` follows each region's outline along the pixel cracks with the inside on the
right. It used to build a table of outgoing directions for every pixel corner in a raster pass and
+1 -1
View File
@@ -66,7 +66,7 @@ plus review. Native-speaker review is human work and isn't in the hours.
| Swedish | `sv` | 8,991 rows, 3,106 of them `@msg` and 48 `@msgplural` (counted 2026-11-14): the untranslated report lists 518 missing messages for it, and 12 menu strings, 1 `tl!` literal and 3 undo labels; one/other plurals | full; native review welcome |
| Bulgarian | `bg` | 5,245 rows, 763 of them `@msg` (counted 2026-10-21): menus and `tl!` literals complete when counted; its messages are partial | full; AI-drafted, native review pending |
| Greek | `el` | 5,251 rows, 795 of them `@msg` (counted 2026-10-21): menus, `tl!` literals and messages complete when counted | full; native review welcome |
| Georgian | `ka` | 5,200 rows (counted 2026-10-21): menus, panels, dialogs, plurals (one count-neutral form) and messages, tested complete; reviewed by a native speaker | full |
| Georgian | `ka` | 9,758 rows, 3,740 of them `@msg` and 49 `@msgplural` (counted 2026-11-15): menus, panels, dialogs and plurals (one count-neutral form); the untranslated report lists 1 missing Georgian message; reviewed by a native speaker | full |
| Turkish | `tr` | 9,175 rows, 3,446 of them `@msg` and 48 `@msgplural` (counted 2026-11-13); 41 messages, 62 menu strings, 26 `tl!` literals, 13 undo labels and the default swatch names still fall back to English | full |
| Catalan | `ca` | 5,626 rows, 881 of them `@msg` (counted 2026-10-28): menus, `tl!` literals and messages complete when counted; one/other plurals; every `ca-*` locale resolves here | full; AI-drafted, native review welcome |
+739 -105
View File
File diff suppressed because it is too large. Load diff
+10 -4
View File
@@ -1,6 +1,6 @@
# Roadmap: milestones and what's next
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-11-16 · **Change:** minor (Recolor Artwork follow-up (#8031, remaining #4028): native Lab input, picker swatch libraries and Assign-row menus; UI interaction regression coverage; scores and estimates unchanged; previously: #8005: the Color spectrum fills a resized panel; scores and estimates unchanged; previously: M7: Check Spelling modal dialog (Edit › Spelling › Check Spelling…), #4936; spell check complete; previously: PDF import: stroked type keeps the line cap, line join and miter limit the file strokes it with, a glyph stroked otherwise than the run it joins coming in as a run of its own, #7741; M10/G5: Neon & Glow built-in graphic style library (Cyan Neon, Magenta Laser, Amber Tube, Electric Lime, Pulse Violet, Cobalt Phosphor); previously: Tech Circuit brush library, G5; previously: Graphic Styles list fills a taller panel, #2992; scores and estimates unchanged; previously: PDF import: glyphs in a span with an empty ActualText come in as outlines, #6971; scores and estimates unchanged; previously: library panels' lists fill a taller panel, #2992; scores and estimates unchanged; previously: Swatches list fills a taller panel, #1638; scores and estimates unchanged; previously: icon-strip flyouts also resize from the top edge and the canvas-side top corner, keeping the moved top in workspaces (storytold/craft-libs#1094); scores and estimates unchanged; previously: #6865: explicitly requested oversized editing artboard; Live Paint Bucket fills faces crossed in one drag (#6373); previously: #6404: transform-aware Eyedropper character copying; scores and estimates unchanged; previously: M10/G5: Energy Beams brush library; MCP docs list Energy Beams; previously minor: M10/G5: Skill Icons symbol library; MCP docs list Skill Icons; previously minor: M10/G5: Status Effects graphic style library; MCP docs catch-up for symbol libraries; previously minor: M10/G5: Inventory Icons built-in symbol library; previously minor: Edit › Edit Custom Dictionary…: its dialog adds, deletes and changes the custom dictionary's words, #4936; previously minor: M10/G5: Game HUD graphic style library; previously minor: resizable icon-strip flyouts and bottom-aligned panel footers, #5713; previously minor: M10/G5: Map Markers built-in symbol library; previously minor: right-click on type: Spelling › Auto Spell Check, with its check mark, #4936; previously minor: right-click on a word Auto Spell Check underlined: its suggestions, Ignore All and Add to Dictionary, #4936; previously minor: G2: Effect Gallery thumbnails and in-dialog preview are in; Auto Spell Check: `edit.autoSpellCheck` underlines the unknown words, #4936; previously minor: PDF editable import preserves authored ActualText once, including empty/nested spans and authored ordering (#6165); cross-line/style layout remains approximate; scores and estimates unchanged; PDF marked-text export (#6309): compatible glyphs stay on one layout line with per-glyph offsets; scores and estimates unchanged; interim macOS cursor delivery, #2292; native validation pending; scores and estimates unchanged; Control bar › Snapping includes the existing Snap to Glyph and Alignment Guides toggles (#6164); scores and estimates unchanged; custom dictionary and Ignore All: `text.spelling.addWord`, `removeWord`, `changeWord`, `dictionary` and `ignoreAll`, #4936; previously minor: EPS import: embedded fonts (composite, Type 42, CID-keyed, Type 1, CFF FontSet) draw their glyphs; spell check engine: `text.spelling.check` and `text.spelling.suggest` on craft-proof, #4936; previously minor: floating tab groups collapse into the side icon rail and opened rail panels fold back into it, #5925 in part; M4/M7: `.ai`/EPS type keeps its tab stops, and right-aligned lines with tabs lay out as the file's page, #6147; M4/M7: `.ai`/EPS type from the text document lays its lines out closer to the file's page, within limits, #6137; numeric fields step on wheel hover without taking keyboard focus, #5949; Character Styles panel: a double-click on a style's row opens its Character Style Options; the dialog keeps a fixed width and scrolls its sections, so its buttons stay on screen; Selection QoL: marquee modes and visible feedback, #5313; SVG CSS classes survive export and repeated import in all four styling modes (#2480); current-main integration retains event attributes and scripts; #3380 deletion-only review follow-up: independent survivors keep gradient placement, owned subpaths avoid discarded copies, and contracts/status/evidence are clarified; endpoint highlighting remains open; scores and estimates unchanged; Indian-language hyphenation review and license allowlist, #4947; Hindi catalog and contributor loanword preferences; full wording review in progress; Effect dialogs: a colour swatch beside a hex colour opens the Color Picker, #5365; shape tools move the selection from its centre point and turn it from the zone outside a box cornerLine truncated
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-11-17 · **Change:** minor (PDF import: a glyph filled only after a glyph filled and stroked comes in filled only, not stroked, #8300; PDF import: translucent type filled and stroked comes in as a filled type object and a stroked one, as the file composites them, and an upright glyph is never kept as the outline of its glyph alone, #8015; PDF import: type filled and stroked by one text-showing operator comes in as one type object, filled and stroked, not a stroked copy over a filled one, #8015; M1: Layers panel Alt-drag shows the copy cursor, #8217; scores and estimates unchanged; previously: Gradient panel: the add-stop strip shows the white arrow with a plus on Windows and X11, #8241; scores and estimates unchanged; previously: Recolor Artwork follow-up (#8031, remaining #4028): native Lab input, picker swatch libraries and Assign-row menus; UI interaction regression coverage; scores and estimates unchanged; previously: #8005: the Color spectrum fills a resized panel; scores and estimates unchanged; previously: M7: Check Spelling modal dialog (Edit › Spelling › Check Spelling…), #4936; spell check complete; previously: PDF import: stroked type keeps the line cap, line join and miter limit the file strokes it with, a glyph stroked otherwise than the run it joins coming in as a run of its own, #7741; M10/G5: Neon & Glow built-in graphic style library (Cyan Neon, Magenta Laser, Amber Tube, Electric Lime, Pulse Violet, Cobalt Phosphor); previously: Tech Circuit brush library, G5; previously: Graphic Styles list fills a taller panel, #2992; scores and estimates unchanged; previously: PDF import: glyphs in a span with an empty ActualText come in as outlines, #6971; scores and estimates unchanged; previously: library panels' lists fill a taller panel, #2992; scores and estimates unchanged; previously: Swatches list fills a taller panel, #1638; scores and estimates unchanged; previously: icon-strip flyouts also resize from the top edge and the canvas-side top corner, keeping the moved top in workspaces (storytold/craft-libs#1094); scores and estimates unchanged; previously: #6865: explicitly requested oversized editing artboard; Live Paint Bucket fills faces crossed in one drag (#6373); previously: #6404: transform-aware Eyedropper character copying; scores and estimates unchanged; previously: M10/G5: Energy Beams brush library; MCP docs list Energy Beams; previously minor: M10/G5: Skill Icons symbol library; MCP docs list Skill Icons; previously minor: M10/G5: Status Effects graphic style library; MCP docs catch-up for symbol libraries; previously minor: M10/G5: Inventory Icons built-in symbol library; previously minor: Edit › Edit Custom Dictionary…: its dialog adds, deletes and changes the custom dictionary's words, #4936; previously minor: M10/G5: Game HUD graphic style library; previously minor: resizable icon-strip flyouts and bottom-aligned panel footers, #5713; previously minor: M10/G5: Map Markers built-in symbol library; previously minor: right-click on type: Spelling › Auto Spell Check, with its check mark, #4936; previously minor: right-click on a word Auto Spell Check underlined: its suggestions, Ignore All and Add to Dictionary, #4936; previously minor: G2: Effect Gallery thumbnails and in-dialog preview are in; Auto Spell Check: `edit.autoSpellCheck` underlines the unknown words, #4936; previously minor: PDF editable import preserves authored ActualText once, including empty/nested spans and authored ordering (#6165); cross-line/style layout remains approximate; scores and estimates unchanged; PDF marked-text export (#6309): compatible glyphs stay on one layout line with per-glyph offsets; scores and estimates unchanged; interim macOS cursor delivery, #2292; native validation pending; scores and estimates unchanged; Control bar › Snapping includes the existing Snap to Glyph and Alignment Guides toggles (#6164); scores and estimates unchanged; custom dictionary and Ignore All: `text.spelling.addWord`, `removeWord`, `changeWord`, `dictionary` and `ignoreAll`, #4936; previously minor: EPS import: embedded fonts (composite, Type 42, CID-keyed, Type 1, CFF FontSet) draw their glyphs; spell check engine: `text.spelling.check` and `text.spelling.suggest` on craft-proof, #4936; previously minor: floating tab groups collapse into the side icon rail and opened rail panels fold back into it, #5925 in part; M4/M7: `.ai`/EPS type keeps its tab stops, and right-aligned lines with tabs lay out as the file's page, #6147; M4/M7: `.ai`/EPS type from the text document lays its lines out closer to the file's page, within limits, #6137; numeric fields step on wheel hover without taking keyboard focus, #5949; Character Styles panel: a double-click on a style's row opens its Character Style Options; the dialog keeps a fixed width and scrolls its sections, so its buttons stay on screen; Selection QoL: marquee modes and visible feedback, #5313; SVG CSLine truncated
>
> Oversized artboard import update (2026-11-12): Explicit editing-data import retains a single artboard beyond a capped 14,400 pt PDF page (#6865).
>
@@ -37,8 +37,9 @@ Window → Help Bar toggles the bottom tool-help strip independently of the stat
**Feature evidence last updated:** 2026-11-03.
M1 selection: Enclosing Lasso selects whole objects enclosed by a freehand loop. It is an add-on
under Object › Plug-ins and has its own heading in All Tools. It has no default shortcut or Basic
toolbar slot. Shift adds and Alt subtracts enclosed objects; Escape cancels the loop.
under Object › Plug-ins, and its tool is also in the Lasso tool's group in both shipped toolbars,
after the Lasso. It has no default shortcut. Shift adds and Alt subtracts enclosed objects; Escape
cancels the loop.
This is a VectorCraft addition; milestone estimates and parity scores are unchanged.
The shared assessment status line and revision history are current upstream; this dated section records the submission's feature evidence and revisions without rescoring upstream or claiming a new combined build or runtime measurement.
@@ -160,7 +161,7 @@ Gujarati interface follow-up (2026-11-14): the catalog and zero/one plural rule
| M1 | Selection, transform, layers, MCP (common command tools, strict keys, session resources and version-aware result hints) | ✅ mostly done (document-tab artwork drag with lossless resource transfer and one target Undo; malformed MCP app replies discard the connection without replay, #1761; bounded control socket waits and connection-slot recovery, #1726; bounded synthetic control input, #1709; no-op anchor Align keeps Undo, Redo and saved state (#1180 follow-up); transform reference point snaps to anchors/centres; rotated objects keep a rotated bounding box and their angle; Free Transform, Scale and Reflect along a rotated box pending; the Transform fields take one Tab each, the W/H link after them) | 4–6 |
| M2 | Drawing tools + smart guides | ✅ mostly done (#3380 deletion creates independent selected path pieces and keeps bounds-fitted gradients in place; endpoint highlighting remains open; Polygon/Star exact-size count persistence, with repeated-drag, tool-switch and Cancel regression coverage; Curvature point markers without direction handles (#1236, in part); Direct Selection segment click/Delete preserves neighboring edges, #1278; Flare, Reshape, Live Corners widget dragging and per-corner radii and kinds landed, on any path's corners; Shaper rough-shape recognition and orientation steps, the remaining Pen modifier nuances; Shaper Groups with editable sources and separate fill/stroke edits landed; custom ruler origin with drag preview, active-artboard reset, relative X/Y fields and native round-trip (#1212); construction widget/refinements pending); a shape just drawn moves by its centre point and turns from the zone outside a corner with its tool still active (#5477); Tangent and straight-segment perpendicular snapping use saved Smart Guides Geometric Guides preferences and Control bar quick access (#2537), including the existing Snap to Glyph and Alignment Guides toggles (#6164); no View submenu; Copy and Cut with the Pen or Curvature tool take the anchors a Cmd/Ctrl-lent Direct Selection picked (#6123) | 12–18 |
| M3 | Paint & appearance (swatches, color, gradient, stroke, appearance, transparency, styles) | ✅ done (M3.7–M3.98): swatches, groups, libraries, tints, Lab spots and Registration; Eyedropper copies transformed character dimensions (#6404) and styles highlighted text only (atomic transparency rejection); Eyedropper reads visible locked and outside-isolation sources (#1251); Color Picker, Color panel (its spectrum grows with a resized panel, #8005), Color Guide, Color Themes, Edit Colors and Recolor Artwork (screen-bounded Edit chip list, #3416; native Lab entry and swatch libraries in the picker, Assign-row menus, #8031/#4028); gradients that follow every transform, the annotator, linked stops, freeform gradients, focal points, gradients on strokes and Expand; visible strokes when paint is added to inherited None/zero-width art (#1253); stroke geometry, arrowheads, dashes fitted to corners, stroke on type, width profiles and the Width tool (Shift-double-click enables adjoining adjustment in Width Point Edit; finite-arithmetic follow-up regressions and full CI passed ([Validation evidence](target-app-parity.md#evidence-what-ships-today-by-area))), Scale Strokes and preview bounds; Appearance targeting, container appearance, target circles, Expand Appearance; knockout, isolation, blend accuracy, CMYK blending, overprint, Attributes, masks and clipping, Flatten Transparency; graphic styles, links and libraries; CSS library export preserves fractional linear and radial gradient stop positions. Left: freeform gradients in SVG/PDF, mixed spot/process gradients in SVG and PDF gradients mixing a spot color with RGB or Lab stops export as stops or process colors; PDF export writes dithered gradient fills with spot stops, and Perceptual spot gradients with RGB or Lab stops other than white or more than 4,096 stops on their curve, as images in process colors; confirm the Scale Strokes & Effects default; Recolor model selection is available through the engine and MCP only (#2520); the dialog retains its existing controls; Library panels' lists (swatch, Color Book, brush, symbol and graphic style libraries) fill a taller panel above its footer (#2992; scores and estimates unchanged); Graphic Styles list fills a taller panel above its footer (#2992; scores and estimates unchanged); Swatches list fills a taller panel above its footer (#1638; `the_list_fills_a_tall_panel_above_its_footer`; scores and estimates unchanged); | 4–8 |
| M4 | Files (native, SVG, PDF, raster, Export for Screens, clipboard interop) | PDF import: stroked type keeps the file's line cap, line join and miter limit (#7741; estimates unchanged); Rename artboards in Export for Screens (#7275); Explicit editing-data import keeps oversized capped-page artboards (#6865; estimates unchanged); Save refusal continuation (#6146): ordinary Save offers Save As; unchanged format keeps options, changed format opens its Save options; cancellation/automation isolation; focused UI regressions passed, native acceptance pending; PDF authored ActualText preserved once in editable import (#6165; first-glyph line/style, bounded input; estimates unchanged); PDF export keeps harakat and zero-advance Noto Arabic dot glyphs in one compatible batch per layout line, with per-glyph vertical offsets (#6309). `crates/pdf/src/tests/realtext.rs` (`mark_text_*`) checks decoded cluster mappings, mixed Arabic/Latin/digits, contour placement against outline export, vertical columns, differing path rotations and PDF/X-1a/3/4. Editable-text import preserves authored ActualText separately (#6165), with cross-line/style layout limits; separately styled or differently rotated clusters and external viewer search/copy remain outside this export-only evidence. `.ai`/EPS type from the text document keeps its paragraphs' tab stops (#6147); `.ai`/EPS type from the text document keeps auto leading per line, its hyphenation options, and may show more of the last lines the file sets in an area frame of its own, when growing the frame by its lines' deepest descent plus 0.05 pt shows them (#6137); ✅ done (M4.14–M4.98 on 2026-10-05): Save As/Save a Copy/Revert/templates, Data Recovery and background save, SVG import and export fidelity (units, text, symbols, filters, SVGZ, Preserve Editing, SVG Options), shared guarded PDF writer and windowed reader ([pdf-backend.md](pdf-backend.md)), PDF import (colours, layers, masks, editable text, security) and export (presets, marks, bleed, ICC and output intent, raster effects, subset fonts, PDF/X-1a, X-3 and X-4, PDF layers, overprint, page thumbnails, fast web view, PDF 1.3), Place and Links, Package, EPS and DXF in and out (EPS legacy mesh corners, vector opacity masks and raster page comparison verified; closed SPLINE flags round-trip and circular paths export as native CIRCLE/ARC, #1299), EMF/WMF, TIFF/BMP/Targa/PSD/GIF/PNG-8 export, Print and print presets, slices, Save for Web, TIFF in Export for Screens and Asset Export, clipboard flavours, File Info; AF.1–AF.4 add Affinity import (native layers, artboards, vectors, text and images from Affinity 1–3 files; the embedded preview only as a warned fallback; AF.4 expands current `.af` fixtures and every-board round-trip validation); EPS Save and Save As keep an opened EPS as EPS with its page frame and complete editable VectorCraft document (2026-10-26; G9 import fidelity unchanged). Left: DWG (use DXF), PSD placement as layers, overprint read back from PDF, Affinity export, polish; SVG CSS classes survive export and repeated import in all four styling modes (#2480); current-main integration retains event attributes and scripts; SVG CSS classes survive export and repeated import in all four styling modes (#2480); current-main integration retains event attributes and scripts; PDF import: glyphs inside a marked-content span with an empty `ActualText` come in as outlines in their fill and stroke, adding no text (#6971; scores and estimates unchanged); | 3–6 (existing scope; Affinity export unestimated) |
| M4 | Files (native, SVG, PDF, raster, Export for Screens, clipboard interop) | PDF import: a glyph filled only after a glyph filled and stroked comes in filled only, not stroked (#8300; estimates unchanged); PDF import: type filled and stroked by one text-showing operator comes in as one filled and stroked type object (#8015; not yet for type filled and stroked at less than full opacity, or a `TJ` whose kerning starts a new line part way through, which still come in as a filled object and a stroked one; estimates unchanged); PDF import: stroked type keeps the file's line cap, line join and miter limit (#7741; estimates unchanged); Rename artboards in Export for Screens (#7275); Explicit editing-data import keeps oversized capped-page artboards (#6865; estimates unchanged); Save refusal continuation (#6146): ordinary Save offers Save As; unchanged format keeps options, changed format opens its Save options; cancellation/automation isolation; focused UI regressions passed, native acceptance pending; PDF authored ActualText preserved once in editable import (#6165; first-glyph line/style, bounded input; estimates unchanged); PDF export keeps harakat and zero-advance Noto Arabic dot glyphs in one compatible batch per layout line, with per-glyph vertical offsets (#6309). `crates/pdf/src/tests/realtext.rs` (`mark_text_*`) checks decoded cluster mappings, mixed Arabic/Latin/digits, contour placement against outline export, vertical columns, differing path rotations and PDF/X-1a/3/4. Editable-text import preserves authored ActualText separately (#6165), with cross-line/style layout limits; separately styled or differently rotated clusters and external viewer search/copy remain outside this export-only evidence. `.ai`/EPS type from the text document keeps its paragraphs' tab stops (#6147); `.ai`/EPS type from the text document keeps auto leading per line, its hyphenation options, and may show more of the last lines the file sets in an area frame of its own, when growing the frame by its lines' deepest descent plus 0.05 pt shows them (#6137); ✅ done (M4.14–M4.98 on 2026-10-05): Save As/Save a Copy/Revert/templates, Data Recovery and background save, SVG import and export fidelity (units, text, symbols, filters, SVGZ, Preserve Editing, SVG Options), shared guarded PDF writer and windowed reader ([pdf-backend.md](pdf-backend.md)), PDF import (colours, layers, masks, editable text, security) and export (presets, marks, bleed, ICC and output intent, raster effects, subset fonts, PDF/X-1a, X-3 and X-4, PDF layers, overprint, page thumbnails, fast web view, PDF 1.3), Place and Links, Package, EPS and DXF in and out (EPS legacy mesh corners, vector opacity masks and raster page comparison verified; closed SPLINE flags round-trip and circular paths export as native CIRCLE/ARC, #1299), EMF/WMF, TIFF/BMP/Targa/PSD/GIF/PNG-8 export, Print and print presets, slices, Save for Web, TIFF in Export for Screens and Asset Export, clipboard flavours, File Info; AF.1–AF.4 add Affinity import (native layers, artboards, vectors, text and images from Affinity 1–3 files; the embedded preview only as a warned fallback; AF.4 expands current `.af` fixtures and every-board round-trip validation); EPS Save and Save As keep an opened EPS as EPS with its page frame and complete editable VectorCraft document (2026-10-26; G9 import fidelity unchanged). Left: DWG (use DXF), PSD placement as layers, overprint read back from PDF, Affinity export, polish; SVG CSS classes survive export and repeated import in all four styling modes (#2480); current-main integration retains event attributes and scripts; SVG CSS classes survive export and repeated import in all four styling modes (#2480); current-main integration retains event attributes and scripts; PDF import: glyphs inside a marked-content span with an empty `ActualText` come in as outlines in their fill and stroke, adding no text (#6971; scores and estimates unchanged); | 3–6 (existing scope; Affinity export unestimated) |
| M5 | Performance | 🟡 background render + caches + MT done; `vectorcraft-cli bench` and `vectorcraft-cli perf` (budget suite); opaque solid-fill knockout paths draw once in hard-edge/supersampled raster export, with analytical-AA compositing unchanged; file format v2 opens 3× faster (50k paths: 722 → 244 ms); raster effects (glows, shadows, blur, feather) no longer force the whole frame single-threaded (filtered offscreen per effect, verified equal to the single-threaded reference); Craquelure/Mosaic Tiles/Stained Glass distance searches optimized with pixel-invariance checks and the `texture_drag_perf` probe (#1257); effect-heavy demos need a clean-machine benchmark; dirty-region rendering, GPU backend spike pending | 15–25 |
| M6 | Path operations (Pathfinder, Shape Builder, offset…) | ✅ mostly done (live compound shapes: Make, Alt-click a Shape Mode, member modes, Release, Expand (#4522); single-result Pathfinder names and SVG IDs retained (#1293); Divide open-cutting-path geometry, appearance and history verified (#1307; existing segment cap remains); Simplify preview/counts and rewritten-path component selection verified (#1272; the slider opens at the Auto-Simplify level; a Direct Selection part of a path simplifies on its own); Compound appearance and member fill-rule edits verified (#1197); Boolean precision on almost-horizontal edges fixed and the property tests made deterministic; Shape Builder gap detection, large-offset bug open); Shape Builder Gap Detection shares Live Paint’s spatial gap finder and temporary merge bridges (#2526); Custom is capped at 72 pt in the existing options dialog | 3–6 |
| M7 | Type (point/area/path, editing, styles, OpenType, threading, glyphs) | Spell check engine: `text.spelling.check` and `text.spelling.suggest` on craft-proof, the custom dictionary and Ignore All commands, Auto Spell Check with its right-click suggestions, Ignore All and Add to Dictionary, Spelling › Auto Spell Check in the context menu of type, the Edit Custom Dictionary dialog, and the modal Check Spelling dialog (Edit › Spelling › Check Spelling…, `Cmd+I`, `ui.checkSpelling`, #4936); Right-aligned area type sets the text after a line's last tab against the right edge, the text before it at its stops (#6147); A line a soft return ends is justified as a wrapped line is (#6137); Indian-language pattern hyphenation preserves syllables in both composers (#4947); 🟡 Hanging punctuation keeps its published amounts under Glyph Scaling, and Standard burasagari counts a hung line start as room; Fullwidth `!` / `?` keep an upright fallback in vertical type; Hyphenation… and Justification… per paragraph (#2310, #2755), Auto Leading also driving the Character panel's Leading, the Alt+↑/↓ leading nudge and Fill with Placeholder Text; Document-point character controls after object/group scaling (#1034; optional font-size preservation remains separate), Character/Paragraph Styles (explicit Auto-leading resets and local leading overrides), per-paragraph paragraph attributes, mixed paragraph alignment indication (headless regressions, full integration CI and visual review pass), Area Type Options (with Width/Height, Auto Size and Shrink Text to Fit; overflow reported to agents and vertical Align), type areas resized by their handles and reshaped with Direct Selection, threaded text, Fit Headline, Glyphs (feature-valued alternates and unencoded glyphs applied in one Undo step while keeping Arabic joining, #5514), OpenType panel (including font-defined Stylistic Sets), Find Font (Document, Recent and System replacement sources, #5217), installed system fonts in every font menu (fonts registered with Windows outside its font folders, the XDG and Flatpak host font folders on Linux, and fonts installed while the app runs, listed when it comes back to the front; searchable; the Character and Properties menus show each family's sample of the selected text, preview it live under the pointer or ↑/↓, show recently applied families first (#3515), filter by script and kind, list a family's styles, and star favourites; the Glyphs panel and Find Font's Replace With use the same menu without the live preview) and found by name on open/import (full-name aliases and Missing Fonts searches verified, #1258; Windows font-service QA pending), variable fonts' named instances as styles, CJK names in the UI, input methods (marked text in place, candidate window at the caret; Japanese IME), Text Wrap (offset, invert, both sides of an object; follows edits), Type on a Path effects and Options with draggable start/centre/end brackets (slide, flip), tab stops + Tabs panel (Above Text floats it over the selected text, its ruler at the canvas zoom so stops line up with the columns, #729), inline symbols in text (beyond parity), Hebrew/Arabic bidirectional text, Paragraph Direction, Every-line/Single-line Composer per object (ragged text too) done; paint-only Arabic harakat keep joining with GDEF-mark ownership and Insert Kashidas tatweels on the base letter's paint (`tests::harakat`); tab leaders, vertical type pending | 45–60 |
@@ -212,6 +213,11 @@ not take the artwork yet. Overflow-menu drag remains separate. Scores and hours
| Date | Change | Summary |
|---|---|---|
| 2026-11-17 | minor | PDF import (#8300): a glyph filled only (text rendering mode 0) right after one filled and stroked (mode 2) joined the stroked run and came in stroked too: `2 Tr (B) Tj 0 Tr (C) Tj` came in as `BC` stroked throughout. A glyph filled only now joins only a run drawn alike, so it starts a run of its own, filled only, in the same type object, and takes a stroke only when the file draws one over it (the #8015 matching); a word filled whole then stroked whole, and fill and stroke rendering glyph by glyph, still come in as one run filled and stroked. Tests: `a_glyph_filled_only_after_one_filled_and_stroked_is_not_stroked`, `glyphs_filled_and_stroked_one_by_one_stay_one_run`; scores and estimates unchanged. |
| 2026-11-17 | minor | PDF import (#8015 follow-up): type filled and stroked at less than full opacity is no longer joined into one type object, since the file composites the fill and the stroke apiece, darker where they overlap, while one object's opacity applies to both together; it stays a filled object and a stroked one, as a fill and stroke at different opacities already did. An upright glyph (vertical type) filled and stroked is no longer kept as an outline for a line that comes in as its outlines, as glyphs filled only weren't, so such a line can't lose them. The #8015 entries now say what is left: translucent type filled and stroked, and a `TJ` whose kerning starts a new line part way through, still come in as two objects. Tests: `translucent_fill_and_stroke_text_stays_two_objects`, `a_vertical_line_with_one_glyph_filled_and_stroked_keeps_every_glyph_filled`; scores and estimates unchanged. |
| 2026-11-16 | minor | PDF import: fill and stroke rendering (text rendering modes 2 and 6) draws all the glyphs of a text-showing operator (`Tj`, `TJ`, `'`, `"`) filled, then the same glyphs stroked, so a word shown at once came in as two type objects: a stroke-only copy over a fill-only one. Each stroke is now matched, in order, to the glyph filled with the same placement (where, how large, how wide, slanted and turned) in the same font with the same text on the line, and only that glyph takes the stroke, so the word comes in as one type object, filled and stroked; glyphs stroked with another join part way through still split into runs of their own, and stroked type over no filled glyph (modes 1 and 5) stays stroke only (#8015; `a_word_filled_then_stroked_imports_as_one_filled_and_stroked_type` in `crates/pdf/src/tests/textstroke.rs`, `a_vertical_column_filled_then_stroked_is_one_filled_and_stroked_type` in `crates/pdf/src/tests/text_placement.rs`). Scores and estimates unchanged. |
| 2026-11-16 | minor | M1: rows or the selected-art square dragged over the Layers panel's list show the copy cursor while Alt is held, as the drop then copies, and the grabbing hand otherwise (#8217). Scores and estimates unchanged. |
| 2026-11-16 | minor | Gradient panel: the strip under the ramp, where a click adds a stop, shows the white arrow with a plus on Windows and X11, where the system copy cursor showed as the plain arrow (#8241). Scores and estimates unchanged. |
| 2026-11-16 | minor | Recolor Artwork follow-up (#8031, remaining #4028): native Lab input, picker swatch libraries and Assign-row menus; UI interaction regression coverage; scores and estimates unchanged. |
| 2026-11-16 | minor | Color panel: the spectrum fills the vertical space of a resized panel, with options shown or hidden (#8005). Compact auto-fit flyouts and embedded mixers keep their existing size. Evidence: panels::color::tests::the_spectrum_grows_with_the_color_panel. Scores and estimates unchanged. |
| 2026-11-15 | minor | PDF import: stroked type (text rendering modes 1, 2, 5 and 6, and glyphs under `ActualText`) keeps the line cap, line join and miter limit of the graphics state it is stroked with, as paths do, instead of butt caps, miter joins and a miter limit of 10; a glyph filled and then stroked otherwise than the run its fill joined comes in as a run of its own, so the glyphs before it keep their stroke (#7741; `imported_stroked_type_keeps_the_files_cap_join_and_miter_limit` in `crates/pdf/src/tests/textstroke.rs`). Scores and estimates unchanged. |
+167 -28
View File
@@ -1,6 +1,6 @@
# Parity with Adobe Illustrator
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-11-16 · **Change:** minor (Recolor Artwork follow-up (#8031, remaining #4028): native Lab input, picker swatch libraries and Assign-row menus; UI interaction regression coverage; scores and estimates unchanged; previously: #8005: the Color spectrum fills a resized panel; scores and estimates unchanged; previously: Paragraph composers (#4935): the Paragraph panel menu and paragraph styles offer four composers, the Middle Eastern & South Asian Single-line and Every-line (how all type is set, and the default) and a Standard Single-line and Every-line that set Indic, Arabic and Hebrew type glyph by glyph as the font maps it, for legacy fonts that keep a script on Latin character codes; PDF import: stroked type keeps the line cap, line join and miter limit the file strokes it with, a glyph stroked otherwise than the run it joins coming in as a run of its own, #7741; G5: Neon & Glow joins built-in graphic style libraries (Cyan Neon, Magenta Laser, Amber Tube, Electric Lime, Pulse Violet, Cobalt Phosphor); scores and estimates unchanged; previously: Pencil ignores Smart Guides and Snap to Point and shows no Smart Guides, #7252; previously: Pencil continuation, straight-line and closing cursors; scores and estimates unchanged; previously: G5: Weather Icons joins built-in symbol libraries (Sun, Moon, Cloud, Rain, Thunder, Snow); scores and estimates unchanged; previously: a closed Pencil stroke closes with a straight segment; previously: Snap to Point with Smart Guides off draws no Smart Guides labels or lines, #7250; previously: 3D: the seams of Extrude & Bevel, Inflate and Rotate under a white light, and of the faces of Extrude & Bevel (Classic), Revolve (Classic) and Rotate (Classic), went from miter to round joins, so white-light 3D output is expected to differ from the 2026-10-17 comparison at facet corners (not measured: the scenes were not exported again); previously: `.ai` and EPS import: in layers that don't draw as the page, art that differs away from an envelope of type no longer costs it its editable type; it keeps its drawn art where, in the pixels it and its drawn art ink, the layers with it differ from the page more than its own check allows, or past the envelopes' share of the page check, #7141; Character panel: the Set Font Height Reference dropdown shows an icon before each reference, #6304; scores and estimates unchanged; previously: Envelopes: a top object's side whose pieces are all one curve split at anchors follows that curve's parameter, so a top object saved with its sides' curves in pieces draws as its `.ai` drawn art, #7097; scores and estimates unchanged; previously: Graphic Styles list fills a taller panel, #2992; scores and estimates unchanged; previously: PDF import: glyphs in a span with an empty ActualText come in as outlines, #6971; scores and estimates unchanged; previously: library panels' lists fill a taller panel, #2992; scores and estimates unchanged; previously: Swatches list fills a taller panel, #1638; scores and estimates unchanged; previously minor: Object › Rasterize with the Grayscale or Bitmap colour model makes a grayscale image, #6969; scores and estimates unchanged; previously minor: `.ai` and EPS import: type in an envelope with Distort Appearance is also tried mapped from the box of what it paints, miter tips and moved strokes included, after its glyphs grown by half its strokes' weight (#6824; #6617: Swatches panel menu: Show Recent Colors; scores unchanged; previously minor: icon-strip flyouts also resize from the top edge and the canvas-side top corner, keeping the moved top in workspaces (storytold/craft-libs#1094); scores and estimates unchanged; previously: #6865: explicitly requested oversized editing artboard; macOS: the canvas cursor stays after the pointer moves, #6362; scores and estimates unchanged; previously minor: Type tool: kerning at a caret at the start of a line moves the character after it, #5111; scores and estimates unchanged; previously minor: Rulers: the zero point dragged out of the rulers' corner snaps as a drawn point does; previously minor: Live Paint Bucket fills faces crossed in one drag (#6373); previously: #6404: transform-aware Eyedropper character copying; scores and estimates unchanged; previously: Envelopes: with Distort Appearance, type's strokes paint along the bent glyph outlines at their own weight, as users' `.ai` files draw them, which changes how VectorCraft's own envelopes of stroked type draw (#6644; scores and estimates unchanged); previously minor: G5: Energy Beams brush library; bundled content ~44% → ~46%; previously minor: G5: Skill Icons symbol library; bundled content ~42% → ~44%; previously minor: `.ai` and EPS import: an envelope saved in Edit Contents whose mesh lies away from its drawn art by a move opens live on that art (#6570; scores and estimates unchanged); previously minor: ruler double-click adds a guide at the pointer, #5239; G5: Status Line truncated
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-11-17 · **Change:** minor (Twist: a strongly twisted path joins its pieces without kinks, #7069; scores and estimates unchanged; previously: PDF import: a glyph filled only after a glyph filled and stroked comes in filled only, not stroked, #8300; PDF import: translucent type filled and stroked comes in as a filled type object and a stroked one, as the file composites them, and an upright glyph is never kept as the outline of its glyph alone, #8015; PDF import: type filled and stroked by one text-showing operator comes in as one type object, filled and stroked, not a stroked copy over a filled one, #8015; Layers panel: Alt over the list shows the copy cursor while rows or the selection square are dragged, #8217; scores and estimates unchanged; previously: Gradient panel: the add-stop strip under the ramp shows the white arrow with a plus on Windows and X11, #8241; scores and estimates unchanged; previously: Properties panel: the Character section shows the font of the Type tool's selection, not the first run's (#8189); scores and estimates unchanged; previously: Recolor Artwork follow-up (#8031, remaining #4028): native Lab input, picker swatch libraries and Assign-row menus; UI interaction regression coverage; scores and estimates unchanged; previously: #8005: the Color spectrum fills a resized panel; scores and estimates unchanged; previously: Paragraph composers (#4935): the Paragraph panel menu and paragraph styles offer four composers, the Middle Eastern & South Asian Single-line and Every-line (how all type is set, and the default) and a Standard Single-line and Every-line that set Indic, Arabic and Hebrew type glyph by glyph as the font maps it, for legacy fonts that keep a script on Latin character codes; PDF import: stroked type keeps the line cap, line join and miter limit the file strokes it with, a glyph stroked otherwise than the run it joins coming in as a run of its own, #7741; G5: Neon & Glow joins built-in graphic style libraries (Cyan Neon, Magenta Laser, Amber Tube, Electric Lime, Pulse Violet, Cobalt Phosphor); scores and estimates unchanged; previously: Pencil ignores Smart Guides and Snap to Point and shows no Smart Guides, #7252; previously: Pencil continuation, straight-line and closing cursors; scores and estimates unchanged; previously: G5: Weather Icons joins built-in symbol libraries (Sun, Moon, Cloud, Rain, Thunder, Snow); scores and estimates unchanged; previously: a closed Pencil stroke closes with a straight segment; previously: Snap to Point with Smart Guides off draws no Smart Guides labels or lines, #7250; previously: 3D: the seams of Extrude & Bevel, Inflate and Rotate under a white light, and of the faces of Extrude & Bevel (Classic), Revolve (Classic) and Rotate (Classic), went from miter to round joins, so white-light 3D output is expected to differ from the 2026-10-17 comparison at facet corners (not measured: the scenes were not exported again); previously: `.ai` and EPS import: in layers that don't draw as the page, art that differs away from an envelope of type no longer costs it its editable type; it keeps its drawn art where, in the pixels it and its drawn art ink, the layers with it differ from the page more than its own check allows, or past the envelopes' share of the page check, #7141; Character panel: the Set Font Height Reference dropdown shows an icon before each reference, #6304; scores and estimates unchanged; previously: Envelopes: a top object's side whose pieces are all one curve split at anchors follows that curve's parameter, so a top object saved with its sides' curves in pieces draws as its `.ai` drawn art, #7097; scores and estimates unchanged; previously: Graphic Styles list fills a taller panel, #2992; scores and estimates unchanged; previously: PDF import: glyphs in a span with an empty ActualText come in as outlines, #6971; scores and estimates unchanged; previously: library panels' lists fill a taller panel, #2992; scores and estimates unchanged; previously: Swatches list fills a taller panel, #1638; scores and estimates unchanged; previously minor: Object › Rasterize with the Grayscale or Bitmap colour model makes a grayscale image, #6969; scores and estimates unchanged; previously minor: `.ai` and EPS import: type in an envelope with Distort Appearance is also tried mapped from the box of what it paints, miter tips and moved strokes included, after its glyphs grown by half its strokes' weight (#6824; #6617: Swatches panel menu: Show Recent Colors; scores unchanged; previously minor: icon-strip flyouts also resize from the top edge and the canvas-side top corner, keeping the moved top in workspaces (storytold/craft-libs#1094); scores and estimates unchanged; previously: #6865: explicitly requested oversized editing artboard; macOS: the canvas cursor stays after the pointer moves, #6362; scores and estimates unchanged; previously minor: Type tool: kerning at a caret at the start oLine truncated
>
> Tech Circuit update (2026-11-14): three original procedural brushes; ten built-in brush libraries (G5).
>
@@ -61,6 +61,10 @@ Artboard Options forwards the active Artboard tool's Scale Artwork with Artboard
| Date | Change | Summary |
|---|---|---|
| 2026-11-17 | minor | Distort & Transform › Twist: handles follow the rotation's derivative, so a strongly twisted path is a smooth spiral instead of pieces meeting at kinks (#7069; `twist_joins_its_pieces_smoothly` in `crates/effects/src/tests.rs`). Scores and estimates unchanged. |
| 2026-11-17 | minor | PDF import (#8300): a glyph filled only (text rendering mode 0) right after one filled and stroked (mode 2) joined the stroked run and came in stroked too: `2 Tr (B) Tj 0 Tr (C) Tj` came in as `BC` stroked throughout. A glyph filled only now joins only a run drawn alike, so it starts a run of its own, filled only, in the same type object, and takes a stroke only when the file draws one over it (the #8015 matching); a word filled whole then stroked whole, and fill and stroke rendering glyph by glyph, still come in as one run filled and stroked. Tests: `a_glyph_filled_only_after_one_filled_and_stroked_is_not_stroked`, `glyphs_filled_and_stroked_one_by_one_stay_one_run`; scores and estimates unchanged. |
| 2026-11-17 | minor | PDF import (#8015 follow-up): type filled and stroked at less than full opacity is no longer joined into one type object, since the file composites the fill and the stroke apiece, darker where they overlap, while one object's opacity applies to both together; it stays a filled object and a stroked one, as a fill and stroke at different opacities already did. An upright glyph (vertical type) filled and stroked is no longer kept as an outline for a line that comes in as its outlines, as glyphs filled only weren't, so such a line can't lose them. The #8015 entries now say what is left: translucent type filled and stroked, and a `TJ` whose kerning starts a new line part way through, still come in as two objects. Tests: `translucent_fill_and_stroke_text_stays_two_objects`, `a_vertical_line_with_one_glyph_filled_and_stroked_keeps_every_glyph_filled`; scores and estimates unchanged. |
| 2026-11-16 | minor | PDF import: fill and stroke rendering (text rendering modes 2 and 6) draws all the glyphs of a text-showing operator (`Tj`, `TJ`, `'`, `"`) filled, then the same glyphs stroked, so a word shown at once came in as two type objects: a stroke-only copy over a fill-only one. Each stroke is now matched, in order, to the glyph filled with the same placement (where, how large, how wide, slanted and turned) in the same font with the same text on the line, and only that glyph takes the stroke, so the word comes in as one type object, filled and stroked; glyphs stroked with another join part way through still split into runs of their own, and stroked type over no filled glyph (modes 1 and 5) stays stroke only (#8015; `a_word_filled_then_stroked_imports_as_one_filled_and_stroked_type` in `crates/pdf/src/tests/textstroke.rs`, `a_vertical_column_filled_then_stroked_is_one_filled_and_stroked_type` in `crates/pdf/src/tests/text_placement.rs`). Scores and estimates unchanged. |
| 2026-11-16 | minor | Recolor Artwork › Assign: native Lab entry in the Color Picker, swatch libraries access in the picker, and row context menu options (Pick from Swatches, Limit to Library) (#4028); scores and estimates unchanged. |
| 2026-11-15 | minor | PDF import: stroked type (text rendering modes 1, 2, 5 and 6, and glyphs under `ActualText`) keeps the line cap, line join and miter limit of the graphics state it is stroked with, as paths do, instead of butt caps, miter joins and a miter limit of 10; a glyph filled and then stroked otherwise than the run its fill joined comes in as a run of its own, so the glyphs before it keep their stroke (#7741; `imported_stroked_type_keeps_the_files_cap_join_and_miter_limit` in `crates/pdf/src/tests/textstroke.rs`). Scores and estimates unchanged. |
| 2026-11-15 | minor | G5: Neon & Glow joins Shadows and Glows, Outlines and Rules, Hand-Drawn, Textures, Painted and Sketched, Gradient Finishes, Shape Effects, Blends and Transparency, Game HUD and Status Effects as an eleventh built-in graphic style library (Cyan Neon, Magenta Laser, Amber Tube, Electric Lime, Pulse Violet, Cobalt Phosphor; original procedural styles generated in code); area score and estimate unchanged. |
@@ -259,7 +263,7 @@ dominate; 3D, graphs and automation are specialist). They sum to 105. Feature de
| Symbols, blends, envelopes, Repeat, perspective | 5 | 88% | remaining: dynamic symbols' `.ai` round trip, further built-in symbol libraries (Basic Shapes, UI Frames with default 9-slice, Map Markers, Inventory Icons, Skill Icons and Weather Icons are done), envelope Anti-Alias/Preserve Shape, 9-slice guides outside the art; Symbol Options › Registration, Export Type (Graphic / Movie Clip) and 9-slice guides (drawn and draggable during symbol editing, #5280) and Symbol Type (dynamic on-canvas fill/stroke including gradient/pattern, opacity and blend, #4938) are done | 4–7 | estimated; Blend panel Type and Ramp control step easing with a separate color Shift (#2539); Blend Options retains spacing and orientation; polynomial curves are original approximations; interactive selected mirror axis implemented; bounding-box handles take priority over the axis line (focused regression and native checks passed; full CI blocked by an unrelated text test); #2544 spine Anchor Point conversion and picking regression-tested |
| Type advanced (CJK, spelling, Touch Type, Retype) | 4 | 50% | CJK vertical composition (ruby, mojikumi), tab leaders, Touch Type, Retype | 20–28 | estimated; upright fallback for fullwidth `!` / `?` regression-tested; score and hours unchanged |
| Symbols, blends, envelopes, Repeat, perspective | 5 | 88% | remaining: dynamic symbols' `.ai` round trip, further built-in symbol libraries (Basic Shapes, UI Frames with default 9-slice, Map Markers, Inventory Icons, Skill Icons and Weather Icons are done), envelope Anti-Alias/Preserve Shape, 9-slice guides outside the art; Symbol Options › Registration, Export Type (Graphic / Movie Clip) and 9-slice guides (drawn and draggable during symbol editing, #5280) and Symbol Type (dynamic on-canvas fill/stroke including gradient/pattern, opacity and blend, #4938) are done | 4–7 | estimated; Blend panel Type and Ramp control step easing with a separate color Shift (#2539); Blend Options retains spacing and orientation; polynomial curves are original approximations; interactive selected mirror axis implemented; bounding-box handles take priority over the axis line (focused regression and native checks passed; full CI blocked by an unrelated text test); #2544 spine Anchor Point conversion and picking regression-tested |
| Image Trace, graphs, image tools | 3 | 75% | graph Column designs, Image Trace Create Strokes depth (Create Object Mosaic is done; junction-returning piece survival has source-generated regressions in `image-trace-quality.md`; simpler contour walk, identical output; an edge's sub-pixel shift is the same from either side; notches read only their own piece; collapsed loops keep few segments, so Paths is monotone on the code-drawn sweep) | 5–8 | estimated (raised from 72%); quick presets reveal adjustment controls, Properties reopens them; Live trace result bounds and selection highlights exclude the retained bitmap except in source-image views (scores/hours unchanged) |
| Image Trace, graphs, image tools | 3 | 75% | graph Column designs, Image Trace Create Strokes depth (Create Object Mosaic is done; junction-returning piece survival has source-generated regressions in `image-trace-quality.md`; simpler contour walk, identical output; an edge's sub-pixel shift is the same from either side; notches read only their own piece; collapsed loops keep few segments, so Paths is monotone on the code-drawn sweep) | 5–8 | estimated (raised from 72%); quick presets reveal adjustment controls, Properties reopens them; Live trace result bounds and selection highlights exclude the retained bitmap except in source-image views (scores/hours unchanged); High Fidelity Photo traces in Full Tone with abutting shapes, summed mean pixel difference over 19 test images 80.5 to 65.6 levels ([quality notes](image-trace-quality.md#high-fidelity-photo-in-full-tone)), score, gaps and hours unchanged |
| Live vector effects | 5 | 85% | Outline Object, SVG Filters | 4–8 | measured count 49/50 (Pathfinder 13/13 with Trap), depth estimated; Warp Options controls verified by focused checks and original-image review |
| 3D and Materials (and Turntable) | 4 | ~25% | live Revolve with automatic smooth vector shading and default-on continuous circular caps, Extrude & Bevel (twist, taper, caps, five bevel shapes), Inflate and Rotate with Position presets (colored Inflate uses smooth membrane lighting; white-light Inflate retains its existing shading; Extrude & Bevel and Rotate retain planar shading; one to ten colored lights, shared neutral ambient, original lighting presets, painter visibility), Revolve (Classic) with Angle, Cap, Offset and the Plastic, Diffuse, No Shading and Wireframe surfaces, the Quick Actions › Expand as Wireframes command (#6354), the Render Settings › Wireframe mode on Extrude & Bevel, Revolve, Inflate and Rotate; materials, shadows, ray tracing, the rest of 3D Classic (Map Art), Turntable views, textures, map art and shading in 3D export | 30–55 | estimated (Extrude & Bevel, Inflate and Rotate added 2026-10-12); Revolve (Classic) is covered by the `revolve::classic` tests and `dialogs::revolve::tests::classic_revolve_shows_its_options_and_applies_as_one_step`; Expand as Wireframes is covered by `crates/effects/src/solids/wireframe/tests.rs` and `crates/engine/src/cmd/wireframe/tests.rs`, and Render Settings › Wireframe by `crates/effects/src/solids/wireframe/tests.rs` and `crates/ui-egui/src/panels/tests_three_d.rs` (score, gaps and hours unchanged); every 3D seam has round joins (2026-11-12, [three-d.md](three-d.md#seams)), score, gaps and hours unchanged |
| Type advanced (CJK, spelling, Touch Type, Retype) | 4 | 50% | CJK vertical composition (mojikumi), variable font axes, tab leaders, Touch Type, Retype | 20–28 | estimated; No Break keeps marked characters on one line; upright fallback for fullwidth `!` / `?` regression-tested; score and hours unchanged |
@@ -269,16 +273,16 @@ dominate; 3D, graphs and automation are specialist). They sum to 105. Feature de
| Image Trace, graphs, image tools | 3 | 75% | graph Column designs, Image Trace Create Strokes depth (Create Object Mosaic is done; junction-returning piece survival has source-generated regressions in `image-trace-quality.md`; large images trace with a warning; Auto Color keeps rare distinct colours) | 5–8 | estimated (raised from 72%); quick presets reveal adjustment controls, Properties reopens them |
| Layers, artboards, document setup | 5 | 78% | Selected-artboard deletion is consistent across panel actions (all-selected retains artboard 1); history prunes removed indices while preserving valid multiselection; remaining: 30.0's artboard locking and colours and managing artboards from the canvas, Layers row menu commands beyond Collect for Export and menus on guide and blend spine rows (click-to-fit objects is done, #1227) | 5–8 | estimated (lowered from 82%: target moved); Artboard deletion keys keep artwork and the first of an all-selected set; Artboard Options' Show Center Mark and Show Cross Hairs draw on the canvas only (exports and print leave them out), regression-tested; Artboard Options' Show Video Safe Areas and Video Ruler Pixel Aspect Ratio (per artboard, native format) are done ([video display options](#evidence-what-ships-today-by-area)), score unchanged |
| View & navigation | 3 | 70% | multiple windows and the rest of Arrange (Cascade, Float in Window, Float All in Windows) | 9–14 | estimated; Window › Arrange › Tile and Consolidate All Windows done (score/hours unchanged); document-tab artwork hover/copy and lossless transfer tested (2026-10-22; score/hours unchanged); cached canvas reprojection preserves scale during resize, rotation and DPI changes (regression and contributor original-file evidence below; scores/hours unchanged); cached canvas dimensions match the renderer limit before cache-key creation, view construction and worker submission (regression evidence below) |
| File formats | 6 | 75% | `.ai` files open with a flattened or wrong layer structure in real cases (#951), no writing of Illustrator's editing data (#868), FreeHand/CorelDRAW/DWG/HEIC import, 3D export; see [file-format-parity.md](file-format-parity.md); EPS legacy mesh/opacity-mask and raster comparison follow-up verified PDF marked-text batching covered by M4 evidence (#6309); cross-line/style ActualText layout (#6165) and styled-cluster limits remain.| 10–20 | estimated (lowered from 85%: open issues); DXF control-point SPLINE import closure regression-tested (#1299 follow-up after #1320); DXF export's Include Placed Images and Include Fill Hatches options, off in CNC / CAM (`images_and_hatches_are_left_out_independently_and_the_cnc_preset_leaves_out_both`; score, gaps and hours unchanged); PDF writer metadata, reader streaming and immutable backend checks in `crates/pdf/src/tests.rs`, `crates/pdf/src/tests/reader_streaming.rs` and `xtask/src/pdf_deps.rs`; PDF Place and clipboard paste retain live text (synthetic regressions); EPS ordinary Save retains the page frame and editable document (2026-10-26); `.ai`/EPS editing data checked against a user's files (2026-10-30): case setting (`ate::tests`, `tests_native::type_from_the_text_document_keeps_its_case_setting`), placed-file placements (`tests_native::a_small_placed_file_goes_where_it_draws_closer_to_the_page`), pages cropped to the art (`tests_native::type_on_the_copies_of_a_page_cropped_to_the_art_is_read_once`), mesh corner weights and state (`ai::mesh::tests::corners_with_handle_weights_of_zero_are_read`, `ai::tests::a_gradient_mesh_takes_the_transparency_written_after_it`), type on a path spacing (`tests_native::type_round_a_circle_is_spaced_as_the_file_lays_it_out`; the distance from the path under Align to Path is measured from the top of each character's em box, half the height of the top of its H or the bottom of its font's bounding box (`tests_native::aligned_type_lies_as_far_from_its_path_as_the_file_lays_it_out`), and the fit under Gravity does not reproduce the file's layout), blend state (`ai::tests::a_blends_transparency_follows_its_record`); scores and estimates unchanged. PDF ActualText preserved in editable import (#6165; bounded synthetic coverage below); score/hours unchanged. Legacy `.ai` type keeps its manual kerning pairs (`Tk`, `TK`), discretionary hyphens (`T+`, `T-`) and hyphenation language (`XL`) when it opens, and legacy `.ai` saves write manual kerning as `Tk` and soft hyphens as `T+` (`import::ai::tests::legacy_manual_pair_kerning_is_kept`, `legacy_ai::tests::manual_kerning_and_soft_hyphens_are_written_and_read_back`); score, gaps and hours unchanged. PDF import: stroked type (text rendering modes 1, 2, 5 and 6) keeps the file's line cap, line join and miter limit, as paths do (#7741, `imported_stroked_type_keeps_the_files_cap_join_and_miter_limit` in `crates/pdf/src/tests/textstroke.rs`); score, gaps and hours unchanged. |
| File formats | 6 | 75% | `.ai` files open with a flattened or wrong layer structure in real cases (#951), a saved `.ai`'s editing copy without live effects on objects other than paths, compound paths and groups that qualify (at most a fill and a stroke, a non-zero fill rule when filled, no large canvas) and whose appearance and effects the art-style writer supports, and with live objects other than grouped column, stacked column, line and area graphs the `.ai` reader reads back whole as their art (#868), FreeHand/CorelDRAW/DWG/HEIC import, textures, map art and shading in 3D export; see [file-format-parity.md](file-format-parity.md); EPS legacy mesh/opacity-mask and raster comparison follow-up verified PDF marked-text batching covered by M4 evidence (#6309); cross-line/style ActualText layout (#6165) and styled-cluster limits remain.| 10–20 | estimated (lowered from 85%: open issues); DXF control-point SPLINE import closure regression-tested (#1299 follow-up after #1320); PDF writer metadata, reader streaming and immutable backend checks in `crates/pdf/src/tests.rs`, `crates/pdf/src/tests/reader_streaming.rs` and `xtask/src/pdf_deps.rs`; PDF Place and clipboard paste retain live text (synthetic regressions); EPS ordinary Save retains the page frame and editable document (2026-10-26); `.ai`/EPS editing data checked against a user's files (2026-10-30): case setting (`ate::tests`, `tests_native::type_from_the_text_document_keeps_its_case_setting`), placed-file placements (`tests_native::a_small_placed_file_goes_where_it_draws_closer_to_the_page`), pages cropped to the art (`tests_native::type_on_the_copies_of_a_page_cropped_to_the_art_is_read_once`), mesh corner weights and state (`ai::mesh::tests::corners_with_handle_weights_of_zero_are_read`, `ai::tests::a_gradient_mesh_takes_the_transparency_written_after_it`), type on a path spacing (`tests_native::type_round_a_circle_is_spaced_as_the_file_lays_it_out`), blend state (`ai::tests::a_blends_transparency_follows_its_record`); scores and estimates unchanged. Graphs saved to `.ai` in either form open again as live graphs (`ai_editing::tests::graphs_are_written_with_their_records_and_open_live`, `legacy_ai::tests::graphs_are_written_with_their_records_and_open_live`, `cmd::graph::tests::a_drawn_graph_saved_as_ai_opens_as_a_graph_unless_the_save_warns`); other graphs are still written as their art (`graphs_the_records_cant_keep_are_written_as_their_art`); score and hours unchanged. PDF ActualText preserved in editable import (#6165; bounded synthetic coverage below); score/hours unchanged. Legacy `.ai` type keeps its manual kerning pairs (`Tk`, `TK`), discretionary hyphens (`T+`, `T-`) and hyphenation language (`XL`) when it opens, and legacy `.ai` saves write manual kerning as `Tk` and soft hyphens as `T+` (`import::ai::tests::legacy_manual_pair_kerning_is_kept`, `legacy_ai::tests::manual_kerning_and_soft_hyphens_are_written_and_read_back`); score, gaps and hours unchanged. PDF import: stroked type (text rendering modes 1, 2, 5 and 6) keeps the file's line cap, line join and miter limit, as paths do (#7741, `imported_stroked_type_keeps_the_files_cap_join_and_miter_limit` in `crates/pdf/src/tests/textstroke.rs`); score, gaps and hours unchanged. |
| File formats | 6 | 75% | `.ai` files open with a flattened or wrong layer structure in real cases (#951), a saved `.ai`'s editing copy without live effects on objects other than paths, compound paths and groups that qualify (at most a fill and a stroke, a non-zero fill rule when filled, no large canvas) and whose appearance and effects the art-style writer supports, and with live objects other than grouped column, stacked column, line and area graphs the `.ai` reader reads back whole as their art (#868), FreeHand/CorelDRAW/DWG/HEIC import, 3D export; see [file-format-parity.md](file-format-parity.md); EPS legacy mesh/opacity-mask and raster comparison follow-up verified PDF marked-text batching covered by M4 evidence (#6309); cross-line/style ActualText layout (#6165) and styled-cluster limits remain.| 10–20 | estimated (lowered from 85%: open issues); DXF control-point SPLINE import closure regression-tested (#1299 follow-up after #1320); PDF writer metadata, reader streaming and immutable backend checks in `crates/pdf/src/tests.rs`, `crates/pdf/src/tests/reader_streaming.rs` and `xtask/src/pdf_deps.rs`; PDF Place and clipboard paste retain live text (synthetic regressions); SVG CSS classes survive export and repeated import in all four styling modes (#2480); current-main integration retains event attributes and scripts; EPS ordinary Save retains the page frame and editable document (2026-10-26); `.ai`/EPS editing data checked against a user's files (2026-10-30): case setting (`ate::tests`, `tests_native::type_from_the_text_document_keeps_its_case_setting`), placed-file placements (`tests_native::a_small_placed_file_goes_where_it_draws_closer_to_the_page`), pages cropped to the art (`tests_native::type_on_the_copies_of_a_page_cropped_to_the_art_is_read_once`), mesh corner weights and state (`ai::mesh::tests::corners_with_handle_weights_of_zero_are_read`, `ai::tests::a_gradient_mesh_takes_the_transparency_written_after_it`), type on a path spacing (`tests_native::type_round_a_circle_is_spaced_as_the_file_lays_it_out`), blend state (`ai::tests::a_blends_transparency_follows_its_record`); scores and estimates unchanged. Graphs saved to `.ai` in either form open again as live graphs (`ai_editing::tests::graphs_are_written_with_their_records_and_open_live`, `legacy_ai::tests::graphs_are_written_with_their_records_and_open_live`, `cmd::graph::tests::a_drawn_graph_saved_as_ai_opens_as_a_graph_unless_the_save_warns`); other graphs are still written as their art (`graphs_the_records_cant_keep_are_written_as_their_art`); score and hours unchanged. PDF ActualText preserved in editable import (#6165; bounded synthetic coverage below); score/hours unchanged. Save refusal continuation (#6146): `READ_ONLY_LOCATION`, Save As on ordinary UI Save only; regression execution pending; score/hours unchanged. Legacy `.ai` type keeps its manual kerning pairs (`Tk`, `TK`), discretionary hyphens (`T+`, `T-`) and hyphenation language (`XL`) when it opens, and legacy `.ai` saves write manual kerning as `Tk` and soft hyphens as `T+` (`import::ai::tests::legacy_manual_pair_kerning_is_kept`, `legacy_ai::tests::manual_kerning_and_soft_hyphens_are_written_and_read_back`); score, gaps and hours unchanged. PDF import: stroked type (text rendering modes 1, 2, 5 and 6) keeps the file's line cap, line join and miter limit, as paths do (#7741, `imported_stroked_type_keeps_the_files_cap_join_and_miter_limit` in `crates/pdf/src/tests/textstroke.rs`); score, gaps and hours unchanged. |
| File formats | 6 | 75% | `.ai` files open with a flattened or wrong layer structure in real cases (#951), no writing of Illustrator's editing data (#868), FreeHand/CorelDRAW/DWG/HEIC import, 3D export; see [file-format-parity.md](file-format-parity.md); EPS legacy mesh/opacity-mask and raster comparison follow-up verified PDF marked-text batching covered by M4 evidence (#6309); cross-line/style ActualText layout (#6165) and styled-cluster limits remain.; PDF type filled and stroked at less than full opacity, or by a `TJ` whose kerning starts a new line part way through, comes in as a filled object and a stroked one (#8015) | 10–20 | estimated (lowered from 85%: open issues); DXF control-point SPLINE import closure regression-tested (#1299 follow-up after #1320); DXF export's Include Placed Images and Include Fill Hatches options, off in CNC / CAM (`images_and_hatches_are_left_out_independently_and_the_cnc_preset_leaves_out_both`; score, gaps and hours unchanged); PDF writer metadata, reader streaming and immutable backend checks in `crates/pdf/src/tests.rs`, `crates/pdf/src/tests/reader_streaming.rs` and `xtask/src/pdf_deps.rs`; PDF Place and clipboard paste retain live text (synthetic regressions); EPS ordinary Save retains the page frame and editable document (2026-10-26); `.ai`/EPS editing data checked against a user's files (2026-10-30): case setting (`ate::tests`, `tests_native::type_from_the_text_document_keeps_its_case_setting`), placed-file placements (`tests_native::a_small_placed_file_goes_where_it_draws_closer_to_the_page`), pages cropped to the art (`tests_native::type_on_the_copies_of_a_page_cropped_to_the_art_is_read_once`), mesh corner weights and state (`ai::mesh::tests::corners_with_handle_weights_of_zero_are_read`, `ai::tests::a_gradient_mesh_takes_the_transparency_written_after_it`), type on a path spacing (`tests_native::type_round_a_circle_is_spaced_as_the_file_lays_it_out`; the distance from the path under Align to Path is measured from the top of each character's em box, half the height of the top of its H or the bottom of its font's bounding box (`tests_native::aligned_type_lies_as_far_from_its_path_as_the_file_lays_it_out`), and the fit under Gravity does not reproduce the file's layout), blend state (`ai::tests::a_blends_transparency_follows_its_record`); scores and estimates unchanged. PDF ActualText preserved in editable import (#6165; bounded synthetic coverage below); score/hours unchanged. Legacy `.ai` type keeps its manual kerning pairs (`Tk`, `TK`), discretionary hyphens (`T+`, `T-`) and hyphenation language (`XL`) when it opens, and legacy `.ai` saves write manual kerning as `Tk` and soft hyphens as `T+` (`import::ai::tests::legacy_manual_pair_kerning_is_kept`, `legacy_ai::tests::manual_kerning_and_soft_hyphens_are_written_and_read_back`); score, gaps and hours unchanged. PDF import: stroked type (text rendering modes 1, 2, 5 and 6) keeps the file's line cap, line join and miter limit, as paths do (#7741, `imported_stroked_type_keeps_the_files_cap_join_and_miter_limit` in `crates/pdf/src/tests/textstroke.rs`); score, gaps and hours unchanged. PDF import: type filled and stroked by one text-showing operator (rendering modes 2 and 6) comes in as one type object, filled and stroked, not a stroked copy over a filled one (#8015, `a_word_filled_then_stroked_imports_as_one_filled_and_stroked_type` in `crates/pdf/src/tests/textstroke.rs`); not yet for type filled and stroked at less than full opacity, or a `TJ` whose kerning starts a new line part way through, which still come in as a filled object and a stroked one (`translucent_fill_and_stroke_text_stays_two_objects`); score and hours unchanged. PDF import: a glyph filled only after a glyph filled and stroked comes in filled only, not stroked (#8300, `a_glyph_filled_only_after_one_filled_and_stroked_is_not_stroked` in `crates/pdf/src/tests/textstroke.rs`); score and hours unchanged. |
| File formats | 6 | 75% | `.ai` files open with a flattened or wrong layer structure in real cases (#951), a saved `.ai`'s editing copy without live effects on objects other than paths, compound paths and groups that qualify (at most a fill and a stroke, a non-zero fill rule when filled, no large canvas) and whose appearance and effects the art-style writer supports, and with live objects other than grouped column, stacked column, line and area graphs the `.ai` reader reads back whole as their art (#868), FreeHand/CorelDRAW/DWG/HEIC import, textures, map art and shading in 3D export; see [file-format-parity.md](file-format-parity.md); EPS legacy mesh/opacity-mask and raster comparison follow-up verified PDF marked-text batching covered by M4 evidence (#6309); cross-line/style ActualText layout (#6165) and styled-cluster limits remain.; PDF type filled and stroked at less than full opacity, or by a `TJ` whose kerning starts a new line part way through, comes in as a filled object and a stroked one (#8015) | 10–20 | estimated (lowered from 85%: open issues); DXF control-point SPLINE import closure regression-tested (#1299 follow-up after #1320); PDF writer metadata, reader streaming and immutable backend checks in `crates/pdf/src/tests.rs`, `crates/pdf/src/tests/reader_streaming.rs` and `xtask/src/pdf_deps.rs`; PDF Place and clipboard paste retain live text (synthetic regressions); EPS ordinary Save retains the page frame and editable document (2026-10-26); `.ai`/EPS editing data checked against a user's files (2026-10-30): case setting (`ate::tests`, `tests_native::type_from_the_text_document_keeps_its_case_setting`), placed-file placements (`tests_native::a_small_placed_file_goes_where_it_draws_closer_to_the_page`), pages cropped to the art (`tests_native::type_on_the_copies_of_a_page_cropped_to_the_art_is_read_once`), mesh corner weights and state (`ai::mesh::tests::corners_with_handle_weights_of_zero_are_read`, `ai::tests::a_gradient_mesh_takes_the_transparency_written_after_it`), type on a path spacing (`tests_native::type_round_a_circle_is_spaced_as_the_file_lays_it_out`), blend state (`ai::tests::a_blends_transparency_follows_its_record`); scores and estimates unchanged. Graphs saved to `.ai` in either form open again as live graphs (`ai_editing::tests::graphs_are_written_with_their_records_and_open_live`, `legacy_ai::tests::graphs_are_written_with_their_records_and_open_live`, `cmd::graph::tests::a_drawn_graph_saved_as_ai_opens_as_a_graph_unless_the_save_warns`); other graphs are still written as their art (`graphs_the_records_cant_keep_are_written_as_their_art`); score and hours unchanged. PDF ActualText preserved in editable import (#6165; bounded synthetic coverage below); score/hours unchanged. Legacy `.ai` type keeps its manual kerning pairs (`Tk`, `TK`), discretionary hyphens (`T+`, `T-`) and hyphenation language (`XL`) when it opens, and legacy `.ai` saves write manual kerning as `Tk` and soft hyphens as `T+` (`import::ai::tests::legacy_manual_pair_kerning_is_kept`, `legacy_ai::tests::manual_kerning_and_soft_hyphens_are_written_and_read_back`); score, gaps and hours unchanged. PDF import: stroked type (text rendering modes 1, 2, 5 and 6) keeps the file's line cap, line join and miter limit, as paths do (#7741, `imported_stroked_type_keeps_the_files_cap_join_and_miter_limit` in `crates/pdf/src/tests/textstroke.rs`); score, gaps and hours unchanged. PDF import: type filled and stroked by one text-showing operator (rendering modes 2 and 6) comes in as one type object, filled and stroked, not a stroked copy over a filled one (#8015, `a_word_filled_then_stroked_imports_as_one_filled_and_stroked_type` in `crates/pdf/src/tests/textstroke.rs`); not yet for type filled and stroked at less than full opacity, or a `TJ` whose kerning starts a new line part way through, which still come in as a filled object and a stroked one (`translucent_fill_and_stroke_text_stays_two_objects`); score and hours unchanged. PDF import: a glyph filled only after a glyph filled and stroked comes in filled only, not stroked (#8300, `a_glyph_filled_only_after_one_filled_and_stroked_is_not_stroked` in `crates/pdf/src/tests/textstroke.rs`); score and hours unchanged. |
| File formats | 6 | 75% | `.ai` files open with a flattened or wrong layer structure in real cases (#951), a saved `.ai`'s editing copy without live effects on objects other than paths, compound paths and groups that qualify (at most a fill and a stroke, a non-zero fill rule when filled, no large canvas) and whose appearance and effects the art-style writer supports, and with live objects other than grouped column, stacked column, line and area graphs the `.ai` reader reads back whole as their art (#868), FreeHand/CorelDRAW/DWG/HEIC import, 3D export; see [file-format-parity.md](file-format-parity.md); EPS legacy mesh/opacity-mask and raster comparison follow-up verified PDF marked-text batching covered by M4 evidence (#6309); cross-line/style ActualText layout (#6165) and styled-cluster limits remain.; PDF type filled and stroked at less than full opacity, or by a `TJ` whose kerning starts a new line part way through, comes in as a filled object and a stroked one (#8015) | 10–20 | estimated (lowered from 85%: open issues); DXF control-point SPLINE import closure regression-tested (#1299 follow-up after #1320); PDF writer metadata, reader streaming and immutable backend checks in `crates/pdf/src/tests.rs`, `crates/pdf/src/tests/reader_streaming.rs` and `xtask/src/pdf_deps.rs`; PDF Place and clipboard paste retain live text (synthetic regressions); SVG CSS classes survive export and repeated import in all four styling modes (#2480); current-main integration retains event attributes and scripts; EPS ordinary Save retains the page frame and editable document (2026-10-26); `.ai`/EPS editing data checked against a user's files (2026-10-30): case setting (`ate::tests`, `tests_native::type_from_the_text_document_keeps_its_case_setting`), placed-file placements (`tests_native::a_small_placed_file_goes_where_it_draws_closer_to_the_page`), pages cropped to the art (`tests_native::type_on_the_copies_of_a_page_cropped_to_the_art_is_read_once`), mesh corner weights and state (`ai::mesh::tests::corners_with_handle_weights_of_zero_are_read`, `ai::tests::a_gradient_mesh_takes_the_transparency_written_after_it`), type on a path spacing (`tests_native::type_round_a_circle_is_spaced_as_the_file_lays_it_out`), blend state (`ai::tests::a_blends_transparency_follows_its_record`); scores and estimates unchanged. Graphs saved to `.ai` in either form open again as live graphs (`ai_editing::tests::graphs_are_written_with_their_records_and_open_live`, `legacy_ai::tests::graphs_are_written_with_their_records_and_open_live`, `cmd::graph::tests::a_drawn_graph_saved_as_ai_opens_as_a_graph_unless_the_save_warns`); other graphs are still written as their art (`graphs_the_records_cant_keep_are_written_as_their_art`); score and hours unchanged. PDF ActualText preserved in editable import (#6165; bounded synthetic coverage below); score/hours unchanged. Save refusal continuation (#6146): `READ_ONLY_LOCATION`, Save As on ordinary UI Save only; regression execution pending; score/hours unchanged. Legacy `.ai` type keeps its manual kerning pairs (`Tk`, `TK`), discretionary hyphens (`T+`, `T-`) and hyphenation language (`XL`) when it opens, and legacy `.ai` saves write manual kerning as `Tk` and soft hyphens as `T+` (`import::ai::tests::legacy_manual_pair_kerning_is_kept`, `legacy_ai::tests::manual_kerning_and_soft_hyphens_are_written_and_read_back`); score, gaps and hours unchanged. PDF import: stroked type (text rendering modes 1, 2, 5 and 6) keeps the file's line cap, line join and miter limit, as paths do (#7741, `imported_stroked_type_keeps_the_files_cap_join_and_miter_limit` in `crates/pdf/src/tests/textstroke.rs`); score, gaps and hours unchanged. PDF import: type filled and stroked by one text-showing operator (rendering modes 2 and 6) comes in as one type object, filled and stroked, not a stroked copy over a filled one (#8015, `a_word_filled_then_stroked_imports_as_one_filled_and_stroked_type` in `crates/pdf/src/tests/textstroke.rs`); not yet for type filled and stroked at less than full opacity, or a `TJ` whose kerning starts a new line part way through, which still come in as a filled object and a stroked one (`translucent_fill_and_stroke_text_stays_two_objects`); score and hours unchanged. PDF import: a glyph filled only after a glyph filled and stroked comes in filled only, not stroked (#8300, `a_glyph_filled_only_after_one_filled_and_stroked_is_not_stroked` in `crates/pdf/src/tests/textstroke.rs`); score and hours unchanged. |
| View & navigation | 3 | 70% | multiple windows and the rest of Arrange (Cascade, Float in Window, Float All in Windows) | 9–14 | estimated; Window › Arrange › Tile and Consolidate All Windows done (score/hours unchanged); document-tab artwork hover/copy and lossless transfer tested (2026-10-22; score/hours unchanged); cached canvas reprojection preserves scale during resize, rotation and DPI changes (regression and contributor original-file evidence below; scores/hours unchanged) |
| View & navigation | 3 | 70% | multiple windows and the rest of Arrange (Cascade, Float in Window, Float All in Windows) | 9–14 | estimated; Window › Arrange › Tile and Consolidate All Windows done (score/hours unchanged) |
| Guides, grids, smart guides, snapping, rulers | 3 | 80% | "intersect" smart guides for a moved selection's anchors (drawn points and dragged anchors snap to intersections, #1658) | 4–7 | estimated (lowered from 85%: target moved); Control bar snapping quick access includes Snap to Glyph and Alignment Guides (#6164); new ruler-guide Alt orientation implemented; global/artboard ruler modes (`view.globalRulers`) and video rulers (View › Rulers › Show Video Rulers, #2849) done; status-bar X/Y uses the active ruler origin and General units; score unchanged |
| Export for Screens, Asset Export, slices, Save for Web | 3 | 85% | anti-aliasing ghost borders (#983); TIFF choices and settings are implemented | 2–4 | estimated |
| Print, colour management, separations, flattener | 3 | 80% | print preview fidelity | 2–4 | estimated |
| Automation (Actions, Variables, scripting, batch) | 3 | 60% | a scripting surface (Illustrator: JavaScript/ExtendScript), Batch, image and graph variables, dataset import/export | 8–14 | estimated; MCP `add_text` exposes existing vertical type; score and hours unchanged |
| UI chrome (panels, Properties, workspaces, preferences) | 6 | 80% | Properties per context, 2 Preferences options stored but unused (#394, audited 2026-10-30: Scratch Disks, legacy vector clipboard), context menus in the panels that have none, accessibility | 13–20 | estimated; floating panels in OS windows of their own on the desktop (#4135), score and hours unchanged; macOS save Format menu implemented (#866), score and hours unchanged; Eyedropper cursor and precise setting checked (#1269), OS visual QA unverified; numeric-field focus and normal text drags regression-tested (#1326); a focus click released more than 1 pt from its press keeps the caret and a tap within 1 pt selects all (#6659); artboard navigation synchronizes the tool selection before destructive actions; status messages and readouts use stable responsive allocations sized for localized labels and ordinary coordinates (sample widths cached by language/unit/DPI; regression and contributor original-file evidence below; scores/hours unchanged); effect dialogs' colour fields show a swatch that opens the Color Picker (#5365), score and hours unchanged; icon-strip flyouts retain user sizes (#5713); floating tab groups collapse into the side icon rail and opened rail panels fold back into it (#5925, in part), scores and hours unchanged ; interim macOS cursor delivery (#2292), headless coverage only; native validation pending, score and hours unchanged; Swatches item context menus have focused regressions and rendered-layout evidence below; scores and estimates unchanged |
| UI chrome (panels, Properties, workspaces, preferences) | 6 | 80% | Properties per context, 2 Preferences options stored but unused (#394, audited 2026-10-30: Scratch Disks, legacy vector clipboard), context menus in the panels that have none, accessibility | 13–20 | estimated; floating panels in OS windows of their own on the desktop (#4135), score and hours unchanged; macOS save Format menu implemented (#866), score and hours unchanged; Eyedropper cursor and precise setting checked (#1269), OS visual QA unverified; the line under the Preferences fields describes each General, Selection & Anchor Display, Guides & Grid and Smart Guides setting on hover and keyboard focus (#8199, #8223, #8248), score and hours unchanged; numeric-field focus and normal text drags regression-tested (#1326); a focus click released more than 1 pt from its press keeps the caret and a tap within 1 pt selects all (#6659); artboard navigation synchronizes the tool selection before destructive actions; status messages and readouts use stable responsive allocations sized for localized labels and ordinary coordinates (sample widths cached by language/unit/DPI; regression and contributor original-file evidence below; scores/hours unchanged); effect dialogs' colour fields show a swatch that opens the Color Picker (#5365), score and hours unchanged; icon-strip flyouts retain user sizes (#5713); floating tab groups collapse into the side icon rail and opened rail panels fold back into it (#5925, in part), scores and hours unchanged ; interim macOS cursor delivery (#2292), headless coverage only; native validation pending, score and hours unchanged; Swatches item context menus have focused regressions and rendered-layout evidence below; scores and estimates unchanged |
| Libraries, Links, Package | 2 | 82% | shared libraries, linked graphics, gradients and patterns as library items (no cloud by design) | 2–3 | estimated |
| Generative AI (Text to Vector, Generative Recolor, Shape Fill, Concept to Vector, Prompt to Edit, Rewrite Text) | 2 | 0% | a pluggable provider and the panels; needs an owner decision on models | 30–60 | measured (absent) |
| **Feature depth** | **105** | **~75%** | | **~250–420** | |
@@ -528,13 +532,13 @@ about 1–1.5 agent-hours each, so the other rows (estimated on the older scale)
| Raster effects (Effect Gallery, Document Raster Effects Settings) | 4 | 35% | ~36 Photoshop-style filters (Artistic, Brush Strokes, Sketch, Stylize) and Texturizer's Load Texture (since done, see the area table above, as is the Effect Gallery, #2883); Document Raster Effects Settings, raster effects in PDF, the pixel-filter pipeline, Radial Blur, Smart Blur (Normal, Edge Only and Overlay Edge), Unsharp Mask, Glowing Edges, Distort (Diffuse Glow, Glass, Ocean Ripple), Pixelate (Color Halftone, Crystallize, Mezzotint, Pointillize), Texture (Craquelure, Grain, Mosaic Tiles, Patchwork, Stained Glass, Texturizer) and Video (De-Interlace, NTSC Colors) are done | 8–14 |
| 3D and Materials | 4 | ~25% | Initial Revolve, Extrude & Bevel, Inflate and Rotate, with simple lighting and four original lighting presets; materials, shadows, ray tracing, Rotate (Classic), Map Art and more complete visibility remain | 25–45 |
| Type advanced | 4 | 50% | CJK composition for vertical type (mojikumi beyond Line-end Punctuation Half Width — the other sets (and their paragraph-start bracket and indent rules), custom kinsoku sets (beyond Hard, Soft and None) and the Mojikumi Settings dialog —, manual tate-chu-yoko is done, its up/down settings remain; No Break is done), tab leaders, Touch Type, Retype; vertical point/area/path type and Type Orientation have initial support (beyond parity, not scored: inline symbols in text) | 20–28 |
| Type core | 9 | 80% | Middle Eastern features beyond bidi layout, Paragraph Direction, digit types and Kashidas (editable bidirectional SVG text, a split caret where directions meet; the Middle Eastern & South Asian composers are done, #4935, but `.ai`/EPS/PDF files carry no composer); paint-only harakat keep joining with conditional GDEF-mark colour ownership, but fonts without GDEF mark classes and some AAT/`morx` ligatures can still leave marks painted as their letters; Every-line Composer fidelity for justified and ragged text (available per object; mixed type sizes in a paragraph still break single-line in non-rectangular area type and with text wrap), Optical Margin Alignment, paragraph spacing limit for vertically justified area type, hidden characters, paragraph attributes in the Type tool's copy and paste (the characters keep their styles, the paragraphs take the destination's), mixed-value display in the Paragraph panel for a selection across differing paragraphs, partial selection of type-area anchors by marquee, optional font-size preservation during group scaling (scaled character controls fixed in #1034). Hyphenation and Justification options, Fractional Widths, System Layout, styled Type-range canvas Paste (#5636), and pattern hyphenation for eleven Indian languages with grapheme/cluster protection (#4947) are done; Sanskrit automatic patterns remain pending an allowlisted source | 14–19 |
| Type core | 9 | 80% | Middle Eastern features beyond bidi layout, Paragraph Direction, digit types and Kashidas (editable bidirectional SVG text, a split caret where directions meet; the Middle Eastern & South Asian composers are done, #4935, but `.ai`/EPS/PDF files carry no composer); paint-only harakat keep joining with conditional GDEF-mark colour ownership, but fonts without GDEF mark classes and some AAT/`morx` ligatures can still leave marks painted as their letters; Every-line Composer fidelity for justified and ragged text (available per object; mixed type sizes in a paragraph still break single-line in non-rectangular area type and with text wrap), Optical Margin Alignment, paragraph spacing limit for vertically justified area type, paragraph attributes in the Type tool's copy and paste (the characters keep their styles, the paragraphs take the destination's), mixed-value display in the Paragraph panel for a selection across differing paragraphs, partial selection of type-area anchors by marquee, optional font-size preservation during group scaling (scaled character controls fixed in #1034). Hyphenation and Justification options, Fractional Widths, System Layout, styled Type-range canvas Paste (#5636), and pattern hyphenation for eleven Indian languages with grapheme/cluster protection (#4947) are done; Sanskrit automatic patterns remain pending an allowlisted source | 14–19 |
| Symbols, blends, envelopes, Repeat, perspective | 5 | 90% | further built-in symbol libraries (Basic Shapes, UI Frames with default 9-slice, Map Markers, Inventory Icons, Skill Icons and Weather Icons are done), dynamic symbols' `.ai` round trip, envelope Anti-Alias/Preserve Shape output and warp point editing, brush interpolation in blends (M8 fidelity pass done); Symbol Options › Registration and Export Type and on-canvas dynamic part paint (gradient/pattern, opacity, blend) are done; symbol editing shows draggable 9-slice guides (#5280), while guides outside the artwork remain unsupported | 4–7 |
| Image Trace, graphs, image tools | 3 | 72% | graph Column designs (Graph Design, Marker designs and series colours set with Group Selection are done), Create Object Mosaic, per-feature stroke/fill choice and varying widths in Image Trace's Create Strokes (Vector Halftone and the Image Trace View modes, Palette and Create Strokes are done) | 6–10 |
| Layers, artboards, document setup | 5 | 82% | Layers panel: a confirmation before deleting layers that hold art, row menu commands beyond Collect for Export (now on every layer, sublayer, group and object row), menus on guide and blend spine rows, the Layer Options dialog for several rows with mixed values, Paste Remembers Layers for sublayers; artboard preset polish (artboard escape routing and document setup modal handoff done; Move Artwork for artboard X/Y edits, Rearrange All Artboards, Document Setup, New Document and the rest of the Layers panel are done) | 4–7 |
| View & navigation | 3 | 70% | New View/Edit Views, multiple windows/arrange, Snap to Pixel/Glyph (print tiling is done) | 9–14 |
| Guides, grids, smart guides, snapping, rulers | 3 | 85% | global/video rulers, Spacing Guides' distance readouts and spacing for resized or drawn art, Alt swapping a ruler guide's orientation, ruler guides selected together with art (marquee, Shift-click), ruler guides as Layers rows with their own lock and hide (#451: Lock Guides locks them all; Make Guides paths are Layers rows already) (dragging existing guides is done, #414; new guides snapping to side midpoints and artboards, and artboard guides, #451; the drawing tools snapping, with Construction Guides, #506; Spacing Guides for moves, #394; moves snapping to the grid, #740; ruler guides pulling drawn points with Smart Guides on, and "center" and "anchor" labels while hovering with the Selection tool, #812; distance and angle labels while drawing, #2983) | 2–4; status-bar X/Y uses the active ruler origin and General units |
| File formats | 6 | 85% | PDF import: stroked type keeps the file's line cap, line join and miter limit (#7741; scores and estimates unchanged); PDF import: glyphs inside a marked-content span with an empty `ActualText` come in as outlines in their fill and stroke, adding no text (#6971; scores and estimates unchanged); Explicit editing-data oversized single-artboard import fixed (#6865); scores and estimates unchanged. Legacy `.ai` files that name but omit their prolog open with their layers, or with their art on one layer when the format has no layers; graph data and settings in these files still come in only as drawn art. Affinity export, and the rest of Affinity import (adjustments, blur and bevel effects, brushes, live symbol instances, text threading), DWG (no open spec: DXF instead), PSD placement as layers (Photoshop Import Options; the merged image is done), EPS checked against more real files users send (Inkscape files open as vectors; other generators' constructs are tested with programs written from the PostScript Language Reference only; CID-keyed CJK type and `CCITTFaxDecode` images not read), the rest of Illustrator's editing data (appearances and live effects, symbols, pattern fills, brushes, placed files: #637), the remaining fidelity polish; EPS, DXF, EMF/WMF, TIFF, BMP, Targa, PSD export, SVGZ, PDF security, PDF/X, PDF layers, presets and Affinity import are done | 6–10 (existing scope; Affinity export unestimated) |
| File formats | 6 | 85% | PDF import: a glyph filled only after a glyph filled and stroked comes in filled only, not stroked (#8300; scores and estimates unchanged); PDF import: type filled and stroked by one text-showing operator comes in as one filled and stroked type object (#8015; not yet for type filled and stroked at less than full opacity, or a `TJ` whose kerning starts a new line part way through, which still come in as a filled object and a stroked one; scores and estimates unchanged); PDF import: stroked type keeps the file's line cap, line join and miter limit (#7741; scores and estimates unchanged); PDF import: glyphs inside a marked-content span with an empty `ActualText` come in as outlines in their fill and stroke, adding no text (#6971; scores and estimates unchanged); Explicit editing-data oversized single-artboard import fixed (#6865); scores and estimates unchanged. Legacy `.ai` files that name but omit their prolog open with their layers, or with their art on one layer when the format has no layers; graph data and settings in these files still come in only as drawn art. Affinity export, and the rest of Affinity import (adjustments, blur and bevel effects, brushes, live symbol instances, text threading), DWG (no open spec: DXF instead), PSD placement as layers (Photoshop Import Options; the merged image is done), EPS checked against more real files users send (Inkscape files open as vectors; other generators' constructs are tested with programs written from the PostScript Language Reference only; CID-keyed CJK type and `CCITTFaxDecode` images not read), the rest of Illustrator's editing data (appearances and live effects, symbols, pattern fills, brushes, placed files: #637), the remaining fidelity polish; EPS, DXF, EMF/WMF, TIFF, BMP, Targa, PSD export, SVGZ, PDF security, PDF/X, PDF layers, presets and Affinity import are done | 6–10 (existing scope; Affinity export unestimated) |
| Export for Screens, Asset Export, slices, Save for Web | 3 | 85% | polish only (all four are done) | 2–4 |
| Print, colour management, separations, flattener | 3 | 80% | print preview fidelity (flattener presets in PDF and print, overprint in PDF and composite print, Print dialog, presets, PostScript, marks, separations, Print Tiling, print overprint/flattener/bitmap options and printer profile are done, as are the Japanese papers in its Media list: JIS B4/B5/B6, はがき, 往復はがき, 封筒 長形3号/長形4号/角形2号/角形3号 and 四六判, beside the ISO B4/B5 that settings saved before them keep) | 1–2 |
| Automation | 3 | 65% | scripting surface, batch (MCP drops malformed app replies without replay; Variables: text/visibility variables bound to objects, an object may carry several, dataset rows applied in one undo step, panel and Window › Variables with dialogs; image/graph kinds and dataset import/export open) | 6–10 |
@@ -584,12 +588,16 @@ since 2026-10-01.
## Evidence: what ships today, by area
- `object.setBounds` uses the same reference point for whole-number integer and floating-point values, including `0` and `0.0`. It rejects negative and fractional indices without changing geometry, selection, or undo history. An omitted or null reference uses the center, and whole-number references above 8 use point 8. Object and direct-anchor selections follow these rules (`tests::bboxrotate::set_bounds_whole_number_references_match_integer_references`, `set_bounds_rejects_invalid_references_without_changes`).
- **Recolor picker follow-up (#8031/#4028):** native Lab numeric entry, document/loaded-library swatches in the Color Picker, and Assign-row Pick from Swatches / Limit to Library menus. #4090 provided the double-click picker and #5113 the Assign sliders. Regression tests `native_lab_entry_in_color_picker` and `row_context_menu_pick_from_swatches_and_limit_to_library` exercise the fields and menu callbacks rather than writing their result state. Area score and hours unchanged.
- **Save refusal (#6146):** ordinary File > Save to its own location offers Save As after a terminal permission/read-only refusal, suggesting the original name and format, preserving options for the unchanged format and opening the chosen format’s Save options on a change. Cancel keeps the failed-save state. Busy pickers, recovery-copy errors, other failures, explicit destinations and Close/Quit keep the existing dialog. Engine, UI and MCP regression cases are in `cmd/fileio/tests_readonly.rs`, `io/tests_read_only_save.rs` and MCP `tests/fileio.rs`; focused UI regressions passed; engine regression execution and native panel acceptance pending. Scores and hours unchanged.
- **PDF authored replacement text (#6165):** `crates/pdf/src/tests/actual_text.rs` covers replacement once with suffix placement, PDF text-string decoding, empty and nested owners, sibling spans, page reset, multiple text-show operations, style/line changes, fill-and-stroke, reader windows and bounded input. Authored logical-order stretches are protected while adjacent ordinary text still undergoes reconstruction. The replacement takes its first placed glyph's style and line; its characters are not redistributed over later lines/styles. Exact mixed-direction paragraph layout is not claimed. No export changes; scores and hours stay at 75% / 10–20 h.
- **PDF stroked type (#7741):** `imported_stroked_type_keeps_the_files_cap_join_and_miter_limit` in `crates/pdf/src/tests/textstroke.rs` covers round, projecting and butt caps, round, bevel and miter joins and a miter limit of 3 on type stroked in rendering modes 1, 2, 5 and 6, shown as a word, a glyph at a time and under `ActualText`; glyphs stroked with another join as runs of their own; and a glyph filled and stroked after one stroked otherwise, which keeps the join of the glyph before it. Synthetic PDFs written in the test (standard Helvetica, not embedded); no fonts or fixtures added. The dash array is not yet carried to the characters.
- **PDF type filled then stroked (#8015):** `a_word_filled_then_stroked_imports_as_one_filled_and_stroked_type` in `crates/pdf/src/tests/textstroke.rs` covers a word shown at once, a `TJ` array of two strings with kerning between them, a line over two `Tj` and a glyph at a time, also under `ActualText`, in text rendering modes 0, 1, 2, 4, 5 and 6: modes 2 and 6 come in as one type object `WAVE` filled #ffffcc with a 3 pt black stroke, round cap and join, modes 1 and 5 stroke only, 0 and 4 fill only; a Type 3 font is filled once in every mode (the reader paints Type 3 glyphs as their procedures draw them); a stroke join that changes between two operators keeps a run each; and filled type with stroked type of its own below it stays two objects. `a_vertical_column_filled_then_stroked_is_one_filled_and_stroked_type` in `crates/pdf/src/tests/text_placement.rs` covers a vertical column in modes 2 and 6. `a_stroke_at_another_size_does_not_go_over_the_filled_glyph` and `a_stroke_over_one_glyph_of_a_filled_word_strokes_only_that_glyph` (also in `textstroke.rs`) cover a word filled and then its first glyph stroked from the same origin: at another size it stays type of its own, and at the same size only that glyph is stroked. `translucent_fill_and_stroke_text_stays_two_objects` (in `textstroke.rs`) covers type filled and stroked at the same opacity: at 0.5 it stays a filled object and a stroked one, as the file composites them apiece, and opaque it is one. `a_vertical_line_with_one_glyph_filled_and_stroked_keeps_every_glyph_filled` in `crates/pdf/src/tests/reshaped.rs` covers a vertical line of Devanagari with one glyph filled and stroked: every glyph comes in filled. `a_glyph_filled_only_after_one_filled_and_stroked_is_not_stroked` (#8300, in `textstroke.rs`) covers a glyph filled only right after one filled and stroked, also after a glyph filled only and before another filled and stroked: it joins the same type object filled only, not stroked; `glyphs_filled_and_stroked_one_by_one_stay_one_run` covers fill and stroke rendering glyph by glyph and a word filled whole then stroked whole at the same place: one run, filled and stroked. Not covered: translucent type filled and stroked, and a `TJ` whose kerning starts a new line part way through, still come in as two objects. Synthetic PDFs written in the tests; no fonts or fixtures added.
- **PDF Indic type (#5235, #6906):** `crates/pdf/src/tests/reshaped.rs` covers a vowel sign the file draws before its consonant (the line keeps the file's glyphs as outlines, with a note), text in reading order (stays type), a mark with no advance (stays on its line, not vertical type of its own), outlined glyphs stroked with different dashes and translucent outlined glyphs (each keeps its own path). Synthetic font only; one real Gujarati file checked by eye on page 1. Indic type in an uninstalled font keeps the file's glyphs as outlines; reordering signs so more lines stay editable is not done. Scores and hours stay at 75% / 10-20 h.
@@ -621,6 +629,7 @@ since 2026-10-01.
**Drawing tools, Dimension tool points that are not anchors follow the art:** A clicked point on a segment stays at its place along the segment, also when the segment curves, and a point off the art is linked to anchors (or, when the anchors lie on one line, anchors and handles) of the path, so both ends of the dimension follow when the art is moved, scaled, turned or reflected, also when the point was placed by a Smart Guide and when the dimension is saved and opened again; a linked linear dimension of reflected art (other than art on one line) has its line on the reflected side; deleting the art, changing its anchor count or whether it is closed, turning an angle's arm into a curve, or making a measured circle or arc no longer circular leaves the dimension where it was, no longer linked, instead of removing it. `a_dimension_to_a_point_on_a_segment_follows_the_art_at_both_ends`, `a_dimension_to_a_point_off_the_art_moves_with_the_art`, `a_dimension_whose_art_changes_its_anchors_stays_where_it_was`, `a_dimension_whose_art_is_opened_stays_where_it_was`, `angle_and_arc_dimensions_whose_art_no_longer_fits_stay_where_they_were`, `a_dimension_that_cannot_be_drawn_again_keeps_its_art`, `a_linked_dimension_of_reflected_art_has_its_line_on_the_reflected_side`, `a_dimension_to_a_point_off_a_line_follows_the_line`, `a_point_off_an_arch_is_reflected_with_the_arch`, `a_point_beside_an_almost_straight_curve_follows_it`, `a_point_off_a_loop_with_its_anchors_in_one_place_follows_it`, `a_point_beside_a_reflected_line_moves_as_a_half_turn_would`, `a_point_on_a_segment_stays_on_it_when_the_segment_curves`, `a_linked_dimension_of_a_reflected_curve_has_its_line_on_the_reflected_side`, `a_dimension_of_art_reflected_across_its_points_changes_sides`, `a_dimension_between_paths_reflected_each_in_its_own_way_keeps_its_offset`, `free_points_survive_a_native_file`, `dimension_free_points_are_checked`, `points_off_anchors_are_held_against_the_path` and `a_point_smart_guides_place_is_held_against_the_path` cover it.
**Drawing tools, Dimension tool points on a Smart Guide stay on the guide:** By VectorCraft's own rule, a clicked point that lies on a Smart Guide already, such as one in line with an object's center, stays where the pointer is when no anchor is within 8 pixels and no segment is within the Smart Guides snapping tolerance, instead of moving onto a segment farther than that tolerance and within 8 pixels; with Snap to Grid or Snap to Pixel on, a point stays on the grid or the whole pixel those options give. `a_point_on_a_guide_stays_on_the_guide` covers it.
**Drawing tools, Dimension tool second point without construction guides through a first point off the anchors:** By VectorCraft's own rule, with Smart Guides on, the second Linear point does not snap to the construction guides through a first point that is not on an anchor, so a click beside a segment straight below such a first point lands on the segment; after a first point picked on an anchor, the construction guides through it still apply. The second point still snaps to anchors, centers and alignment lines, and with Snap to Perpendicular or Snap to Tangent on, it lands where the line from the first point meets a segment square or grazes a curve. `a_point_on_a_guide_stays_on_the_guide`, `the_second_point_after_an_anchor_lands_on_construction_guides`, `the_second_point_lands_square_to_a_segment_or_grazing_a_curve` and `linear_picks_show_and_snap_to_smart_guides` cover it.
**Drawing tools, Dimension tool points land on dimensions already drawn (#8063):** By VectorCraft's own rule, with Smart Guides or Snap to Point on, a Linear point that no anchor of the art within 8 pixels takes lands on the end of a visible, unlocked dimension's dimension line, or on the far end of its extension line, within 8 pixels, and a point that nothing else places lands on the closest point of such a line within 8 pixels, so at any zoom a dimension can start where another one ends. The end of an extension line next to the point it measures does not pull points away from that anchor. With Smart Guides and Anchor/Path Labels on, a point on an anchor or line end shows the "anchor" label and a point on a segment or line shows the "path" label. `linear_picks_land_on_anchors_paths_and_drawn_dimensions` and `an_anchor_beside_a_drawn_dimension_takes_the_point` cover it.
**Drawing tools, Dimension tool dimensions selected with their art keep their lines and label:** Object › Expand, Object › Expand Appearance and Object › Path › Outline Stroke leave a dimension selected with art it measures, directly or in selected groups without fills, strokes or effects of their own, as it is and change only the other art; when the new art no longer fits its link, the dimension stays where it was, no longer linked, and undo links it again. `expand_leaves_a_dimension_selected_with_its_art_as_it_is`, `expand_appearance_leaves_a_dimension_selected_with_its_art_as_it_is`, `outline_stroke_leaves_a_dimension_selected_with_its_art_as_it_is`, `a_dimension_selected_with_art_that_has_nothing_to_expand_changes_nothing`, `a_group_effect_expanded_reaches_the_dimension_it_holds`, `expand_keeps_a_dimension_in_its_asset_and_its_variable_binding`, `a_dimension_keeps_no_link_to_the_art_expand_replaced`, `a_dimension_outlasts_the_art_outline_stroke_or_expand_appearance_replaced`, `a_dimension_outlasts_the_stroke_expand_outlined` and `expand_appearance_in_safe_mode_leaves_a_dimension_selected_with_its_art` cover it.
**Drawing tools, Line Segment from one curve onto a common tangent of another:** By VectorCraft's own rule, with Smart Guides and Snap to Tangent on, a Line Segment drag pressed anywhere on a convex closed path with curves and dragged to within the snapping tolerance of another such path lands on a common tangent of the two ([tangent lines to circles](https://en.wikipedia.org/wiki/Tangent_lines_to_circles)): both ends move to where the line touches the paths, the start sliding along the first path, and each end shows the "tangent" label when Anchor/Path Labels is on, with the line drawn as a guide when Alignment Guides is on. The line is the tangent whose touch point on the second path is nearest the pointer, so moving the pointer around the second path switches between the outer tangent and the one crossing between the paths. The start stays where it was pressed when Shift, Alt or Space is held, when an anchor, center or crossing lies nearer the pointer than the second path does, when the press snapped to an anchor, center or crossing off the first path, when Snap to Tangent is off, when Snap to Grid or pixel snapping places drawn points, or when either path bends inward somewhere or has more than 512 segments. `a_line_from_one_circle_to_another_lands_on_their_common_tangent`, `a_line_from_a_turned_ellipse_lands_on_its_tangent_with_a_circle`, `a_line_near_the_second_path_takes_the_tangent_touching_it_nearest`, `a_line_keeps_its_start_without_a_tangent_snap`, `a_line_to_a_crescent_or_from_an_anchor_beside_the_curve_keeps_its_start` and `a_line_segment_drag_draws_the_common_tangent_as_one_undo_step` cover it.
**Live trace result bounds and selection highlights exclude the retained bitmap except in source-image views:** `live_trace_result_bounds_exclude_the_retained_bitmap_at_any_angle` checks every TraceView, geometric and visual bounds and rotated result bounds. `live_trace_selection_highlight_excludes_the_retained_source_rectangle` checks result highlights and the existing ordinary-group policy. Shared editing-child traversal also preserves Shaper handling.
@@ -632,7 +641,8 @@ since 2026-10-01.
- **Clipped bottom-bar text (#6622):** A Help Bar hint wider than the window, such as the Dimension tool's hint in an 800-point window, ends in an ellipsis, as the status message does. In a narrow status bar the tool name ends in an ellipsis and leaves the status message its room. Resting the pointer on a clipped hint, tool name or message shows the full text in a tooltip that wraps within the window. Text that fits shows no tooltip, and screen readers receive the full text. Scores and estimates are unchanged.
- **Notes of an open in the status bar:** After File › Open the status message names the first note that says reading the file left something out (the notes that make Save ask before writing over the file), else the first note, and counts them all. With several notes, resting the pointer on the message lists them in that order, as many as fit in the window and at most 30, then how many more. Screen readers receive the list after the message. Scores and estimates are unchanged.
- **Notes of a save or an export in the status bar:** After Save, Save As, Save a Copy, Save as Template, Save a Timestamped Copy, Save as PDF, Export As, Export Selection, Export for Screens, Asset Export, Save for Web, Preview in Browser, Save for Office Documents, Text Export Options, a print to a file or the CSS Properties panel's export, the status message names the first note and counts them all. With several notes, resting the pointer on the message lists them in the order the reply gives them (a save's notes start with what the format loses), as it lists an open's notes. Scores and estimates are unchanged.
- **What a save or an export loses, named first:** Each writer marks its notes as a loss (something of the document the file leaves out or writes differently) or a note on the options (an option it didn't apply or applied another way while the art reaches the file as it looks, or something an option turns off). The replies of the save and export commands list the losses first, each kind in the order given, across every file an export writes. The status message after a save or an export then names a loss when there is one: an export to lossy WebP of type in a font that isn't installed names the fallback-font note instead of the lossy WebP note. A print to a file and the print preview list theirs the same way: art outside the imageable area, type in a fallback font and transparency flattened for PostScript come before notes such as a fixed flatness that isn't written or copies per sheet that don't fit. Scores and estimates are unchanged.
- **Notes of a Copy, a Cut or an Image Trace in the status bar:** After Copy or Cut (also of artboards and of text in the Type tool) writes its formats to the system clipboard, and after Image Trace's Make or Make and Expand, the status message names the first note and counts them all. With several notes, resting the pointer on the message lists them in the order they were made, as it lists a save's notes. A message shown while the clipboard formats were being made stays in place of the Copy's or Cut's notes. A Copy, Cut or trace without notes clears the notes message that an earlier one left, and leaves any other message. A trace that makes no paths shows its first note without the count. Scores and estimates are unchanged.
- **What a save or an export loses, named first:** Each writer marks its notes as a loss (something of the document the file leaves out or writes differently) or a note on the options (an option it didn't apply or applied another way while the art reaches the file as it looks, or something an option turns off). The replies of the save and export commands list the losses first, each kind in the order given, across every file an export writes. The status message after a save or an export then names a loss when there is one: a WebP export of type in a font that isn't installed, given an option WebP doesn't read (`interlaced`), names the fallback-font note instead of the note on that option. A print to a file and the print preview list theirs the same way: art outside the imageable area, type in a fallback font and transparency flattened for PostScript come before notes such as a fixed flatness that isn't written or copies per sheet that don't fit. Scores and estimates are unchanged.
- **Canvas review follow-up:** Cached canvas dimensions match the renderer limit before cache-key creation, view construction and worker submission. Controlled-worker regression checks oversized width and height, high DPI and the render transform without allocating oversized images. Scores and estimates are unchanged.
- **Cached canvas frames during viewport changes:** Cached screen textures use their own raster dimensions and pixels-per-point when reprojected. `canvas::tests::cached_frames_keep_their_scale_during_resize_rotation_and_dpi_changes` holds the worker and checks every UV corner against the cached render transform, including isolated viewport-only resize at zero/30-degree rotation, fractional raster dimensions, zoom/pan, changed rotation, monitor-DPI changes in both directions, Pixel Preview and replacement-frame delivery. The contributor rebuilt and confirmed the original resize issue is fixed with their own artwork on 2026-10-19; the subsequent upstream rebase is checked by regressions and full CI. The artwork stays local. Scores and estimates are unchanged.
@@ -650,10 +660,13 @@ since 2026-10-01.
- **Transform effect options (#885):** Effect › Distort & Transform › Transform… has visible Transform Objects, Transform Patterns and Scale Strokes & Effects checkboxes (`distort.transform` params `objects`, `patterns`, `strokes`; files without them draw as before). With Transform Objects off the geometry stays and makes no copies; Scale Strokes & Effects scales stroke weights, dashes and the fills' and strokes' effect distances by the mean scale, and Transform Patterns moves pattern tiles, each copy `k` by the transformation `k` times. Such objects draw, export and expand through the same per-copy art, so the canvas and Expand Appearance agree (engine `tests_transformfx`, effects `tests_transformfx`, the dialog test). A Transform effect in a fill's or stroke's own effects applies the same options to that fill or stroke: its weight and dashes and its pattern follow the transformation, and with copies each copy is an object of its own; the canvas, export, Expand Appearance and Use Preview Bounds use the same art (effects `tests_transformfx`). The effects listed after it in that fill's or stroke's list keep their own distances and apply to the transformed art and to each copy, as an object's later effects do after the object's Transform effect: a Drop Shadow after it keeps its offset, an Offset Path after it offsets by its own distance, and an SVG filter after it keeps its scale and the origin of its user space. With Transform Objects off, the effects before it keep their distances too. Before, Scale Strokes & Effects scaled a fill's or stroke's later effects by the mean scale, so existing documents with such effects draw differently. Effects apply in the order they are listed ([Appearance attributes](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-graphic-styles/appearance-attributes-in-illustrator.html)); how the two options treat the effects after a fill's or stroke's own Transform effect is VectorCraft's own rule, following that order (effects `tests::rasterfollow::a_fills_own_transform_leaves_the_shadow_after_it`, `tests::rasterfollow::a_fills_own_transform_leaves_the_offset_after_it`, `tests::rasterfollow::a_fills_own_transform_leaves_the_svg_filter_after_it`, `tests::transformfx::a_fills_own_transform_with_scale_strokes_and_effects_leaves_its_later_effects`; engine `plugins::a_transform_after_a_painted_fill_effect_leaves_the_later_shadow_on_every_paint`). Public reference: [Scale objects](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/scale-objects.html), [How to apply effects](https://helpx.adobe.com/illustrator/using/effects.html), [Distort and transform effects](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/distort-and-transform-effects-in-illustrator.html). Scores and hours unchanged.
- **Raster effects before a Transform effect:** effects apply in the order they are listed ([Appearance attributes](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-graphic-styles/appearance-attributes-in-illustrator.html)). A Drop Shadow, glow, blur, Feather or pixel filter listed before a Transform effect in the same list (an object's effects, or a fill's or stroke's own) now follows that Transform effect: its sizes scale by the mean scale, and a Drop Shadow's offset turns, reflects and scales with the art. VectorCraft applies this rule with Scale Strokes & Effects on or off. Before, such an effect was drawn at its own distances around the transformed art. The canvas, export, Expand Appearance, Object › Expand, Outline Stroke and the 3D effects use the same values (effects `tests::rasterfollow`; render `a_transform_after_a_drop_shadow_scales_the_shadow_with_the_art`; engine `objexpand::a_shadow_before_a_transform_expands_as_the_canvas_draws_it`, `outlinestroke::a_shadow_before_a_transform_outlines_as_the_canvas_draws_it`). Not yet: a Transform effect that makes copies or moves at random leaves the raster effects before it as they are. The light direction of Underpainting, Rough Pastels, Conté Crayon, Bas Relief, Plaster and Texturizer and the stroke direction of Sprayed Strokes and Graphic Pen now turn and reflect with such a Transform effect, each set to the nearest of its menu's choices (at a tie, the one clockwise of it; VectorCraft's own rule), and Color Halftone's four screen angles turn and reflect with the art ([Distort and transform effects](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/distort-and-transform-effects-in-illustrator.html); effects `tests::rasterfollow::bas_relief_light_follows_rotation_and_reflection` and the tests after it). Not yet: filters whose strokes or patterns run along fixed page axes without a direction setting (Angled Strokes, Crosshatch, Mezzotint's lines, Halftone Pattern's lines, Grain's horizontal and vertical types, De-Interlace) keep those axes, and an uneven scale or a shear sets a direction from the one vector it maps, not a skewed pattern. Scores and hours unchanged.
- **A fill's or stroke's raster effects on copies:** an effect can be applied to only the fill or only the stroke of an object ([the help page](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/vector-and-raster-effects.html)), and the Transform effect can make copies ([the help page](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/distort-and-transform-effects-in-illustrator.html)). How the copies carry a fill's or stroke's raster effects is VectorCraft's own rule. On a path or compound path, each copy that a fill's or stroke's own Transform effect makes now carries the Drop Shadow, glow, blur, Feather or pixel filter listed before that Transform effect in the fill's or stroke's effects, drawn from that copy's fill area or stroke outline, with its sizes scaled by the copy's mean scale and a Drop Shadow's offset turned, reflected and scaled with the copy; with Transform Patterns or Scale Strokes & Effects on, the shadow is not scaled a second time. A raster effect listed after the Transform effect paints once around all the copies, and with either option on it stays on each copy as before. A Transform effect that makes copies and is listed after another of the fill's or stroke's own Transform effects with either option on gives each of its copies the raster effects listed before it the same way, except when a raster effect is listed before a Transform effect that is itself listed before it and makes copies or moves at random (see Not yet below); without either option of its own, it does so only when no raster effect is listed after it. Each copy of a path's own Transform effect that makes copies now carries the raster effects of its fills and strokes the same way, for a single fill, a single stroke, or several. Type is drawn as its outlines, so each copy that a fill's or stroke's own Transform effect makes of type carries those raster effects the same way. Before, one shadow was drawn around all the copies at the fill's or stroke's own distances. A Transform effect without copies, or with Transform Objects off, draws as before. The canvas, the object's bounds, export and Expand Appearance draw the same copies, and copies that stop at the effect budget each keep their effects (effects `tests::rasterfollow::each_copy_of_a_fills_or_strokes_own_transform_carries_the_shadow_before_it`, `tests::rasterfollow::each_copy_of_a_later_copying_transform_carries_the_shadow_before_it`, `tests::rasterfollow::each_copy_of_an_objects_transform_carries_its_fills_or_strokes_shadow`, `tests::rasterfollow::a_fills_shadow_after_its_own_copying_transform_paints_once_around_the_copies`, `tests::rasterfollow::row_copies_past_the_budget_each_keep_their_shadow`, `tests::rasterfollow::type_carries_its_fills_shadow_on_each_copy`; render `objectfx::each_copy_of_a_fills_or_strokes_transform_draws_its_own_shadow`; engine `objexpand::each_copys_fill_shadow_expands_as_the_canvas_draws_it`). Not yet: a fill's or stroke's raster effects on the copies of groups, images and symbol instances, and a fill or stroke whose effects list raster effects before one of its own Transform effects that make copies and another raster effect after it and before a later Transform effect that makes copies or moves at random (for example Drop Shadow, Transform, Drop Shadow, Transform, with both Transform effects making copies), which still paints its raster effects around all of the copies. Scores and hours unchanged.
- **Raster effects before a Transform effect that makes copies:** the Transform effect can make copies with its transformation applied ([the help page](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/distort-and-transform-effects-in-illustrator.html)). Giving each copy the raster effects listed before that effect is VectorCraft's own rule. On a path or compound path, each copy now carries the Drop Shadow, glow, blur, Feather or pixel filter listed before the last Transform effect that makes copies, with its sizes scaled by that copy's mean scale and a Drop Shadow's offset turned, reflected and scaled with the copy; a raster effect listed after it paints once around all the copies. Before, one shadow was drawn under all the copies at the object's own distances. The canvas, the object's bounds, export and Expand Appearance draw the same copies, and copies that stop at the effect budget each keep their effects (effects `tests::rasterfollow::each_copy_of_a_transform_effect_carries_the_shadow_listed_before_it`, `tests::rasterfollow::a_shadow_after_a_copying_transform_paints_once_around_the_copies`, `tests::rasterfollow::copies_past_the_budget_each_keep_their_shadow`; render `objectfx::each_copy_of_a_transform_effect_draws_its_own_shadow`; engine `objexpand::each_copys_shadow_expands_as_the_canvas_draws_it`). A Transform effect without copies draws as before. A fill's or stroke's own Transform effect that makes copies is covered under "A fill's or stroke's raster effects on copies". Not yet: the copies of groups still share one set of raster effects, and so does a path with Rasterize, an SVG filter or another effect that is neither a geometry effect nor one of those raster effects before the copying effect. Scores and hours unchanged.
- **Raster effects before a Transform effect that makes copies:** the Transform effect can make copies with its transformation applied ([the help page](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/distort-and-transform-effects-in-illustrator.html)). Giving each copy the raster effects listed before that effect is VectorCraft's own rule. On a path or compound path, each copy now carries the Drop Shadow, glow, blur, Feather or pixel filter listed before the last Transform effect that makes copies, with its sizes scaled by that copy's mean scale and a Drop Shadow's offset turned, reflected and scaled with the copy; a raster effect listed after it paints once around all the copies. Before, one shadow was drawn under all the copies at the object's own distances. The canvas, the object's bounds, export and Expand Appearance draw the same copies, and copies that stop at the effect budget each keep their effects (effects `tests::rasterfollow::each_copy_of_a_transform_effect_carries_the_shadow_listed_before_it`, `tests::rasterfollow::a_shadow_after_a_copying_transform_paints_once_around_the_copies`, `tests::rasterfollow::copies_past_the_budget_each_keep_their_shadow`; render `objectfx::each_copy_of_a_transform_effect_draws_its_own_shadow`; engine `objexpand::each_copys_shadow_expands_as_the_canvas_draws_it`). A Transform effect without copies draws as before. A fill's or stroke's own Transform effect that makes copies is covered under "A fill's or stroke's raster effects on copies". Not yet: the copies of groups still share one set of raster effects, and so does a path with an SVG filter or another effect that is neither a geometry effect nor one of those raster effects before the copying effect (a path's own Rasterize effect is covered under "Rasterize before a Transform effect that makes copies"). Scores and hours unchanged.
- **Raster effects before a Transform effect that copies type, an image or a symbol instance:** each copy that a Transform effect makes of type, an image or a symbol instance now carries the Drop Shadow, glow, blur, Feather or pixel filter listed before that effect, under the same VectorCraft rule as for paths: its sizes scale by that copy's mean scale and a Drop Shadow's offset turns, reflects and scales with the copy, while a raster effect listed after the Transform effect paints once around all the copies. Type is copied as its outlines, an image in its frame, and a symbol instance as its symbol's art. Before, one shadow was drawn under all the copies at the object's own distances. The canvas, the object's bounds, export and Expand Appearance draw the same copies; type whose Transform effect only moves its copies is exported as its outlines then, rather than as type under one shadow (effects `tests::rasterfollow::each_copy_of_type_an_image_or_a_symbol_instance_carries_the_shadow_listed_before_it`, `tests::rasterfollow::baked_type_whose_transform_moves_its_copies_keeps_a_shadow_on_each`, `tests::rasterfollow::type_with_a_reshaped_fill_keeps_one_shadow_around_its_copies`; render `objectfx::each_copy_of_an_images_transform_effect_draws_its_own_shadow`, `objectfx::each_copy_of_a_symbol_instances_transform_effect_draws_its_own_shadow`; engine `objexpand::each_copys_shadow_on_type_expands_as_the_canvas_draws_it`). Not yet: type and symbol instances in perspective, type, images and symbol instances whose fill or stroke has geometry effects of its own, and objects with a linked opacity mask keep one set of raster effects around their copies. Scores and hours unchanged.
- **Rasterize before a Transform effect:** effects apply in the order they are listed, each one taking the result of the one before ([the help page](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-graphic-styles/appearance-attributes-in-illustrator.html)). On a path or compound path, a Transform effect listed after the object's own Rasterize effect now moves the image that Rasterize makes: the image is made of the art before the Transform effect, at the Rasterize effect's resolution and with its room around the art, and the Transform effect scales, turns, reflects and moves the image with its pixel grid. Before, the Transform effect moved the art and Rasterize made a new image of the moved art on a grid square to the page. Keeping the image's pixel grid under the Transform effect is VectorCraft's own rule. A hidden Transform effect, or one with Transform Objects off, leaves the image where it is, and one that scales it to nothing leaves nothing drawn. The canvas, the object's bounds, Expand Appearance and PDF export draw the same image (effects `tests::rasterfollow::rasterize_following_ignores_hidden_and_objects_off`, `tests::rasterfollow::the_image_moves_by_each_transform_about_the_art_it_takes`; render `rasterize::rasterize_then_scale_uses_the_pretransform_pixels`, `rasterize::rasterize_then_rotate_and_reflect_moves_the_pixel_grid`, `rasterize::rasterize_then_nonuniform_scale_and_zero_scale_are_bounded`; engine `rastersettings::expand_rasterize_then_transform_matches_canvas`). Not yet: a Transform effect that makes copies or moves at random, a Transform effect followed by another kind of effect, a fill's or stroke's own Rasterize effect, and Rasterize on type, images, symbol instances and groups keep the earlier behavior. Scores and hours unchanged.
- **Raster effects before a group's or layer's Transform effect that makes copies:** groups and layers can carry effects of their own ([the help page](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/vector-and-raster-effects.html)), and the rule above for paths now covers them as VectorCraft's own rule. Each copy of a group's or layer's own last Transform effect that makes copies carries the Drop Shadow, glow, blur, Feather or pixel filter listed before that effect, made of all the copy's members together, with its sizes scaled by that copy's mean scale and a Drop Shadow's offset turned, reflected and scaled with the copy; a raster effect listed after it paints once around all the copies, and the members' own raster effects in each copy stay as a copying Transform effect leaves them. Before, one shadow was drawn around all the copies at the group's own distances. A clip group's copies each clip, and a layer's ruler guides stay once above the copies. The canvas, the bounds, export with raster effects as images and Expand Appearance draw the same copies, and copies that stop at the effect budget each keep their effects (effects `tests::rasterfollow::each_copy_of_a_groups_or_layers_transform_effect_carries_the_shadow_listed_before_it`, `tests::rasterfollow::a_groups_copying_transform_leaves_member_and_later_shadows_where_they_paint`, `tests::rasterfollow::a_groups_copies_past_the_budget_each_keep_their_shadow`, `tests::rasterfollow::a_layers_guides_stay_once_above_copies_that_carry_its_shadow`, `tests::rasterfollow::a_baked_group_with_type_keeps_a_shadow_on_each_copy`; render `objectfx::each_copy_of_a_groups_or_layers_transform_effect_draws_its_own_shadow`; engine `objexpand::each_copys_shadow_on_a_group_expands_as_the_canvas_draws_it`, `objexpand::each_copys_random_member_expands_as_the_canvas_draws_it`, `pdfraster::each_copys_shadow_on_a_group_flattens_under_that_copy`). Not yet: a compound shape, a Shaper group, and a group or layer with a Pathfinder effect, a 3D effect, Crop Marks, Vector Halftone, a live-effect plug-in that paints what it returns, a perspective or a fill or stroke with geometry effects of its own keep one set of raster effects around their copies. Scores and hours unchanged.
- **Rasterize before a Transform effect:** effects apply in the order they are listed, each one taking the result of the one before ([the help page](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-graphic-styles/appearance-attributes-in-illustrator.html)). On a path or compound path, a Transform effect listed after the object's own Rasterize effect now moves the image that Rasterize makes: the image is made of the art before the Transform effect, at the Rasterize effect's resolution and with its room around the art, and the Transform effect scales, turns, reflects and moves the image with its pixel grid. Before, the Transform effect moved the art and Rasterize made a new image of the moved art on a grid square to the page. Keeping the image's pixel grid under the Transform effect is VectorCraft's own rule. A hidden Transform effect, or one with Transform Objects off, leaves the image where it is, and one that scales it to nothing leaves nothing drawn. The canvas, the object's bounds, Expand Appearance and PDF export draw the same image (effects `tests::rasterfollow::rasterize_following_ignores_hidden_and_objects_off`, `tests::rasterfollow::the_image_moves_by_each_transform_about_the_art_it_takes`; render `rasterize::rasterize_then_scale_uses_the_pretransform_pixels`, `rasterize::rasterize_then_rotate_and_reflect_moves_the_pixel_grid`, `rasterize::rasterize_then_nonuniform_scale_and_zero_scale_are_bounded`; engine `rastersettings::expand_rasterize_then_transform_matches_canvas`). A Transform effect that makes copies is covered under "Rasterize before a Transform effect that makes copies". Not yet: a Transform effect that moves at random, a Transform effect followed by another kind of effect, a fill's or stroke's own Rasterize effect, and Rasterize on type, images, symbol instances and groups keep the earlier behavior. Scores and hours unchanged.
- **Rasterize before a Transform effect that makes copies:** besides transforming an object, the Transform effect can repeat its transformation on a number of copies ([the help page](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/distort-and-transform-effects-in-illustrator.html)). On a path or compound path, each copy that a Transform effect listed after the object's own Rasterize effect makes now carries the image that Rasterize made of the art before the Transform effect: the image is made once, and copy `k` places it through the effect's map applied `k` times, its pixel grid and its room around the art included, with the last copy lowest and the original on top. Before, the Transform effect copied the art and Rasterize made one image of all the copies on a grid square to the page. Placing the one image on each copy is VectorCraft's own rule. Copies stop where the copied art stops, a copy scaled to nothing is left out, and a Transform effect after the copying one moves every copy. A shadow or glow listed between the Rasterize effect and the Transform effect paints around each placement. The canvas, the object's bounds, Expand Appearance and PDF export draw the same placements; Expand Appearance and PDF export make a group of images that share the one image's pixels (effects `tests::rasterfollow::rasterize_following_ignores_hidden_and_objects_off`, `tests::rasterfollow::each_copy_carries_the_image`; render `rasterize::rasterize_then_copying_transform_places_the_image_on_each_copy`, `rasterize::rasterize_then_copies_scaled_to_nothing_are_left_out`, `rasterize::rasterize_then_shadow_then_copying_transform_makes_the_image_once`; engine `rastersettings::expand_rasterize_then_copying_transform_places_the_image_on_each_copy`). Not yet: two Transform effects that both make copies, and a copying Transform effect that moves at random, keep the earlier behavior. Scores and hours unchanged.
- **Raster effects before a Transform effect past the effect budget:** VectorCraft leaves out a Transform effect whose result would pass its geometry budget of 2 million anchors or 8 million lines drawn, and the art stays where it was. The raster effects listed before that Transform effect now stay with the art too: a Drop Shadow keeps its own offset and blur, and the Transform effects after it that fit still move both. Before, the art stayed while the shadow scaled with the Transform effect it did not take. This is VectorCraft's own rule. It applies to a path's own effects and to its fills' and strokes' own, also when the path is in a group whose geometry effects run after its members' own, on the canvas and in its bounds, in export, Expand Appearance, Object › Expand and Outline Stroke, and a hidden shadow keeps its values once shown (effects `tests::rasterfollow::a_transform_past_the_line_budget_moves_the_art_with_its_shadow`, `tests::rasterfollow::only_transforms_that_ran_move_a_preceding_shadow`, `tests::rasterfollow::a_skipped_item_transform_keeps_its_shadow`, `tests::rasterfollow::the_shape_art_of_a_skipped_transform_keeps_its_shadows`, `tests::rasterfollow::a_members_skipped_transform_keeps_its_shadow_under_its_groups_effects`; render `objectfx::a_shadow_before_a_skipped_transform_reaches_as_far_as_it_is_drawn`, `fx::renderer::tests::a_path_paints_from_the_transforms_that_moved_it`; engine `objexpand::a_shadow_before_a_skipped_transform_expands_with_its_own_offset`). Not yet: the shadow of type, an image, a symbol instance or a group whose art a Transform effect leaves in place past the budget still follows that effect. Scores and hours unchanged.
- **Random Transform moves past the image limits of Expand Appearance:** a Transform effect's Random option takes its seed from the object's id, which is VectorCraft's own rule. When Expand Appearance's limits of 1,024 images and 256 megapixels leave the raster effects of an object that a random Transform effect moves, and that object is a member of a group or layer whose own geometry effects or fills and strokes expand, or the object of a Crop Marks effect, the group, layer or object now stays as it is, with its effects, as an object whose own image would pass those limits does. The document keeps none of the images its expansion made, and the limits get them back. Before, the member got a new id, so its random move changed while its effects stayed live. This is VectorCraft's own rule (engine `effectcmd::tests::a_member_the_raster_budget_leaves_keeps_its_random_move`, `effectcmd::tests::crop_marks_the_raster_budget_leaves_keep_their_random_move`). Scores and hours unchanged.
- **Raster effects inside an object or group with a Transform effect:** effects applied to a group affect everything in it ([Appearance attributes](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-graphic-styles/appearance-attributes-in-illustrator.html)). How a Transform effect changes the raster effects inside a group or object is VectorCraft's own rule. A group's Transform effect that moves it once now transforms the raster effects of its members, of their fills and strokes, of nested groups and of the art of the linked opacity masks in it, after the members' own Transform effects. A raster effect that a member's own Transform effect with copies or random holds back keeps its value through that effect and still transforms with the group's. VectorCraft applies the same rule to the raster effects of an object's fills and strokes under the object's Transform effect. Sizes scale by the mean scale and a Drop Shadow's offset turns, reflects and scales, with Scale Strokes & Effects on or off. Before, they kept their values, or with Scale Strokes & Effects on scaled by the mean scale with the offset unturned. A group's or object's Transform effect that makes copies or moves at random leaves them as before, except a path's Transform effect that makes copies (see "A fill's or stroke's raster effects on copies"). The canvas, the redraw region, export, Expand Appearance, Object › Expand and Outline Stroke use the same values (effects `tests::rasterfollow`, `group::tests::a_compound_shapes_transform_turns_its_fills_shadow`; render `a_transform_scales_the_shadows_of_fills_and_members_with_the_art`; engine `objexpand::a_fills_shadow_under_the_objects_transform_expands_as_the_canvas_draws_it`, `objexpand::shadows_under_a_groups_or_an_objects_transform_expand_appearance_as_the_canvas_draws_them`, `outlinestroke::a_strokes_shadow_under_the_objects_transform_outlines_as_the_canvas_draws_it`). Scores and hours unchanged.
- **A group's geometry effects after its members' own:** effects applied to a group affect everything in it, and effects apply in the order they are listed ([Appearance attributes](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-graphic-styles/appearance-attributes-in-illustrator.html)). Running a group's effects after its members' own is VectorCraft's own rule. The geometry effects of a group or layer (the effects that reshape outlines, such as Distort & Transform, Offset Path and Warp) now reshape what its members draw: the geometry effects of each visible path and compound path in it and of their fills and strokes, and a nested group's own geometry and Pathfinder effects, run first, at any depth. A symbol instance's own geometry effects run after those of its symbol's members in the same way. Before, the group's effects reshaped the members' outlines and the members' own effects ran afterwards: a 100 pt square with its own 10 pt Offset Path in a group with a 50% Transform drew 70 pt wide, and it now draws 60 pt wide. Existing documents with such groups draw differently. The canvas, export, Expand Appearance and the art that Pathfinder operations and compound shapes take from such a group use the same order (effects `group::tests::a_members_own_offset_runs_before_its_groups_scale`, `group::tests::a_members_own_scale_runs_before_its_groups_offset`, `group::tests::a_member_of_a_plain_nested_group_takes_its_own_effects_first`, `group::tests::a_nested_groups_own_effects_run_before_its_groups`, `group::tests::a_nested_groups_pathfinder_runs_before_its_groups_effects`, `group::tests::a_members_fill_effects_run_before_its_groups`, `group::tests::shape_art_of_a_group_applies_its_members_effects_first`, `group::tests::a_symbol_instances_effects_run_after_its_symbols_members_own`, `group::tests::a_baked_group_applies_its_members_effects_first`, `group::tests::a_baked_group_that_keeps_its_type_applies_its_members_effects_first`, `tests::rasterfollow::a_groups_transform_applies_after_its_members_own`; engine `objexpand::a_groups_effects_after_its_members_own_expand_as_the_canvas_draws_them`). Not yet: the own geometry effects of images, symbol instances, paths with a linked opacity mask or a 3D effect, and nested groups with a 3D effect in the group still run after the group's. Scores and hours unchanged.
- **Warp Options (#1760):** Effect > Warp and existing Appearance effect links share the fifteen existing styles, original schematic previews, orientation choices and percent Bend/Distortion controls. Focused tests passed for real numeric entry and slider input, Preview/Cancel, immediate Enter/OK, mixed-style edits, target/slot/visibility preservation and Undo/Redo. Each applied style stays unchanged until an explicit Style choice. Original style-menu and live-preview captures were reviewed; their numeric values were supplied programmatically. Public references: [Reshaping with effects](https://helpx.adobe.com/illustrator/using/reshaping-objects-effects.html) and [Using effects](https://helpx.adobe.com/illustrator/using/effects.html). Warp geometry, optional Properties integration and remembered defaults are unchanged; no broader parity claim.
@@ -674,13 +687,16 @@ since 2026-10-01.
- **Placed gradients follow Transform and Free Distort effects:** a gradient placed with the Gradient tool moves, turns and scales with the object when the object's Transform effect moves its outline, and each copy of the Transform effect takes it as many times as it takes the transform. Under Free Distort it moves and scales from the path's bounds before the effect to its bounds after it. This holds on the canvas, in export, in Expand Appearance, in Pathfinder and compound shapes, and in Object › Expand of the fill, for an object's own effects, a group's (the own fills of the group, of the groups inside it, of a symbol's art, and of the images and symbol instances it moves, included) and a fill's or stroke's own. A gradient on a path inside a group with a Transform effect now moves with the path (#2214 moved only the gradients of type), and so does a gradient on an image's or symbol instance's own fill. When a path keeps its shape because the effect would pass the geometry budget, the group's own gradients stay in place; a hidden path in a layer, which the layer's bounds leave out, does not hold them. A freeform gradient whose points were edited moves its points in the same way. How gradients follow each effect is VectorCraft's own rule; what each effect does to the object is described in [Distort and transform effects](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/distort-and-transform-effects-in-illustrator.html) (effects `bake::tests::a_baked_transform_moves_a_placed_gradient_with_the_path`, `bake::tests::a_strokes_own_transform_and_free_distort_move_its_placed_gradient`, `bake::tests::a_fills_gradient_follows_the_effects_around_its_transform_with_options`, `bake::tests::baked_free_distort_moves_placed_gradients_from_the_bounds_to_the_distorted_bounds`, `group::tests::a_groups_transform_and_free_distort_move_the_gradients_placed_on_its_paths`, `group::tests::a_groups_transform_moves_the_gradient_of_its_own_fill`, `group::tests::a_nested_groups_own_gradient_follows_the_outer_groups_transform_and_free_distort`, `group::tests::a_groups_transform_moves_the_gradients_placed_on_an_images_own_fills`, `group::tests::shape_art_moves_gradients_with_a_transform_effect`, `group::tests::shape_art_moves_the_gradient_of_a_symbol_instances_art_with_its_transform`, `tests::art_past_the_budget_keeps_its_own_gradients_in_place`, `tests::a_hidden_path_past_the_budget_leaves_a_layers_gradients_free_to_move`, `tests::edited_freeform_points_follow_a_transform_effect_and_free_distort`; render `objectfx::a_paths_gradient_moves_with_its_transform_and_free_distort`; engine `objexpand::a_placed_gradient_moved_by_a_transform_or_free_distort_expands_as_the_canvas_draws_it`). Scores and hours unchanged.
- **Constrain Angle (#394):** General › Constrain Angle turns the arrow keys' axes (guides stay on the page's), holds Shift drags of the Selection, Direct Selection, Free Transform, Slice Selection, Reshape and Measure tools and the Pen's handles to the turned axes, and new rectangles, rounded rectangles, ellipses, grids, point and area type, Shift-drawn polygons and stars and the shape size dialogs are drawn along it with their bounding box turned; 0° and whole turns are exactly as before, quarter turns exact (<https://helpx.adobe.com/illustrator/desktop/manage-objects/arrange-objects/rotate-objects-by-specific-angles.html>). Tests: `tests_constrain_tools`, `tests_constrain_new` (engine), `geom` `constrain_axes` / `rotate_deg`, the shape, grid and type tool tests.
- **Arcs along General › Constrain Angle:** with a Constrain Angle other than 0° or a whole turn, an arc dragged out with the Arc tool and an arc placed from the Arc Segment Tool Options click dialog are drawn along the turned x and y axes, with their bounding box turned. The drag's box and Shift's equal lengths are measured along those axes, the reference point stays at the drag's corner or at the click, and F, C and ↑/↓ keep the turn. `shape.arc` takes an optional `rotation` (degrees clockwise, about `x1`, `y1` or about the reference point `x`, `y`); a `rotation` that is not a number is an error. At 0° and whole turns arcs are drawn as before, and quarter turns are exact. The help page (<https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=226>) describes new objects being drawn along the turned axes; how the Arc tool's keys and reference point work with them is VectorCraft's own rule (tools `draw2::family::tests::arcs_follow_the_constrain_angle`; engine `constrain_angle_draws_a_dragged_arc_along_the_turned_axes`, `constrain_angle_turns_a_click_made_arc_about_its_reference_point`, `arc_rotation_turns_it_and_must_be_a_number`). Scores and hours unchanged.
- **Spirals turn as they are dragged, and along General › Constrain Angle:** a spiral dragged out with the Spiral tool turns about its center so that its outer end is at the pointer, so dragging around the center turns it, while Alt, Ctrl/Cmd, ↑/↓, Space and Escape work as before. A spiral placed from the Spiral dialog starts along the x axis turned by a Constrain Angle other than 0° or a whole turn, with its bounding box turned. `shape.spiral` takes an optional `rotation` (degrees clockwise about `cx`, `cy`); a `rotation` that is not a number is an error, and without one spirals are drawn as before. The help page (<https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=65>) says that moving the pointer around in a curve during the drag turns the new spiral, and the help page (<https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=226>) describes new objects being drawn along the turned axes. Putting the outer end exactly at the pointer, keeping the last direction while the pointer is within 0.01 pt of the center, and leaving a dragged spiral's direction to the pointer with Shift or a Constrain Angle are VectorCraft's own rules (tools `draw2::family::tests::spiral_drag_turns_the_spiral_to_the_pointer`; engine `a_dragged_spiral_turns_its_outer_end_to_the_pointer`, `constrain_angle_turns_a_click_made_spiral`, `spiral_rotation_turns_it_and_must_be_a_number`; UI `spiral_click_dialog_starts_along_the_constrain_angle`). Scores and hours unchanged.
- **Shape commands refuse invalid options:** `shape.arc` refuses a `reference` that is not a whole number from 0 to 8, a `baseAlong` other than `x` or `y` (either case), null included for both, and a `slope` outside −100…100, in both of its forms; before, such a value drew the arc with reference point 0 or 8, the X axis or the nearest slope. `shape.rectangularGrid` and `shape.polarGrid` refuse a divider count that is not a whole number of at least 0; before, such a count was 5. Each error names the key, and nothing is drawn. Left-out values keep their defaults. These ranges are VectorCraft's own command rules (engine `draw2::shape_arc_rejects_an_invalid_reference_base_along_or_slope`, `draw2::shape_arc_takes_every_reference_point_and_either_base_axis`, `draw2::grid_divider_counts_reject_fractions_and_negatives`). Scores and hours unchanged.
- **Roughen at Size 0 keeps the outline:** with Size 0 (relative or absolute), Effect › Distort & Transform › Roughen… moves no point: each segment is split at the Detail spacing (fewer points past the anchor limit) into pieces of equal length on the segment itself, so the path keeps its outline, with Smooth or Corner points alike. A straight segment gets corner points without handles, and a curve gets smooth points whose handles follow it. Before, the points were joined by straight lines (Corner) or a smoothed curve through them (Smooth), which changed curved outlines. Existing documents with a Roughen of Size 0 on a curved path, or with Smooth points, draw differently. This is VectorCraft's own rule; what Roughen does is described in [Distort and transform effects](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/distort-and-transform-effects-in-illustrator.html) (effects `tests::roughen_at_size_0_keeps_the_outline_and_spaces_its_points_evenly`). Scores and hours unchanged.
- **Clipping paths on their outline (G1):** the selection tools (Selection, Direct Selection, Group Selection), Object Highlighting and a right-click take a clipping path on its outline before the art it clips; Select Behind lists the same; the eyedropper, the tools that act on what is drawn and the selection tools' double-clicks, loaded text and guide release take the art. Doc and tool regression tests; score unchanged.
- **Link cursor for loaded text:** with text loaded from a port, the Selection tool's pointer adds a link badge over a closed path, area type or type on a path that a click threads the text into, and keeps the loaded text elsewhere; a click on a frame already in a thread or a path inside a compound path makes a new frame instead of a `text.thread.add` error (`select::tests::loaded_text_shows_the_link_cursor_where_a_click_threads_it_into_the_object`, `cursors::tests::loaded_text_link_cursor_is_the_loaded_text_with_a_link_badge`); score unchanged.
- **Copy and Cut of anchors picked with a lent Direct Selection (#6123):** with the Pen or the Curvature tool, Cmd/Ctrl held lends Direct Selection for the gesture; the anchors and segments it picks are what Edit › Copy and Cut take once the key is let go, as with Direct Selection chosen, while the last anchor the Pen leaves selected as it draws still makes Copy take the whole path (#2122). A Cmd gesture that leaves the selection as it was (a Shift marquee over nothing) picks nothing. Regression test: `tests::draw2::pen_cmd_selected_anchors_are_what_copy_and_cut_take`.
- **Cut of picked anchors (#6361):** Edit › Cut removes direct-selected anchors from their path and from a compound path's member, with the segments attached to them, as Clear does. Picked segments still lose only those segments. When a path also has a picked segment, Cut removes and copies only its picked segments and ignores its picked anchors, on every contour, as Clear does; an anchor left without a surviving segment is removed with them. Regression tests: `cut_*_anchors_*` and `cut_of_an_anchor_with_a_segment_on_another_contour_leaves_the_source_as_clear_does` in `crates/engine/tests/it/copy_direct_selection.rs`.
- **Escape in Selection tool drags:** Escape during a Selection tool move or Alt-drag copy, a bounding-box scale or rotation, a marquee, or a corner widget, pie widget or bracket drag cancels it: the art returns to its state at the press, no copy is left, no undo step is added, the release does nothing, and the tool stays chosen. This is VectorCraft's own behavior. Regression tests: `escape_cancels_*` in `select/tests.rs` and `pie.rs`, and `escape_cancels_a_selection_tool_move_copy_scale_or_rotation` in `tests/selectescape.rs`.
- **Large Shift-marquee selections and Select › Inverse:** `select.toggle` and `select.add` with many ids (a Shift-drag marquee sends them together) go through the selection once instead of once per id, and Select › Inverse looks each object up in a set of the selected ones. The resulting selection, its order and the reply are the same as before. With 50,000 objects the selection step of toggling every object off took 528 to 655 ms before and 2.5 to 4.6 ms after in 7 runs, wall clock on a machine that was running other builds (`cargo run --release -p vectorcraft-engine --example selection_bench`). Regression tests: `add_all_does_what_adding_each_does` and `toggle_all_does_what_toggling_each_does` in `crates/doc/src/selection/tests.rs`, and `toggle_and_add_handle_each_listed_id_in_order` in `crates/engine/tests/it/selection_commands.rs`.
- **Selection passes through raster effects:** clicks with the Selection, Direct Selection and Group Selection tools (Group Selection's repeated click included), the Selection tool's pointer and marquee, Direct Selection's marquee, pointer and anchor highlight, and Group Selection's marquee (E for enclosed objects included) leave out the area that a drop shadow, a glow, a blur or another raster effect paints beyond an object. A click on a shadow selects the object under it, or nothing over an empty canvas, a repeated Group Selection click there adds the groups of the object under it, and a press on the shadow of a selected object does not move it ([the help page](https://helpx.adobe.com/illustrator/using/selecting-objects.html)). Over a shadow, Direct Selection highlights only the anchors of the object under it, and Group Selection keeps its own pointer and highlights no anchor, as it does everywhere (VectorCraft's own rule). No setting changes this. This covers paths, groups, type, symbol instances and images. Regression tests: `crates/engine/src/tests/select_effects.rs`.
- **Symbol instances are selected where their art draws past their box:** a click or a marquee selects a symbol instance where a clipping path in its art, moved or reshaped by its live geometry effects, shows the art past the instance's box, as it selects a group of the same art; a click also selects it where a stroke in its art paints past the box ([the help page](https://helpx.adobe.com/illustrator/desktop/manage-objects/select-objects/select-objects.html)). The rest is VectorCraft's own rule: inside the box the instance is selected as before; in Outline view and below a layer whose Preview is off only the box counts; hidden art and the area a raster effect paints are left out. This covers instances in groups, nested in other symbols' art, moved and scaled. Regression tests: `a_symbol_instance_is_hit_where_a_moved_clipping_path_in_its_art_shows_the_art` and `a_symbol_instance_is_hit_on_the_stroke_of_its_art_past_its_box` in `crates/doc/src/hit/tests.rs`.
- **Selection follows geometry effects:** a click or a marquee with the selection tools selects a path or compound path where its live geometry effects (Transform, Offset Path, Roughen, Zig Zag and the other effects that reshape a path, on the object or on its fills and strokes) draw it, the copies a Transform effect makes included, and not where its own geometry no longer paints. The members of a group or layer whose own geometry effects move or reshape them are selected where they are drawn, at the depth each tool selects, and a locked member there lets the click through to what is below and is listed there in the Unlock submenu. A group's own fills and strokes are clicked where they paint its members, and a clipping path inside such a group is taken on its drawn outline before the art it clips. A compound path keeps its holes, Object Selection by Path Only takes the drawn outline and not its fill, and stacking order is kept. The selection tools select objects by clicking or by a marquee ([the help page](https://helpx.adobe.com/illustrator/desktop/manage-objects/select-objects/select-objects.html)), and the effects leave the art they reshape editable ([the help page](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/apply-and-modify-effects.html)); where clicks land on the reshaped art is VectorCraft's own rule. In Outline view clicks and marquees use the plain paths, and in a layer with Preview off they take outlines only. The area a raster effect paints is still left out. Regression tests: `a_*_shifted_art_*`, `a_click_hits_a_paths_copy_and_evaluates_its_art_once_until_it_changes`, `a_groups_own_effect_moves_where_its_members_are_hit`, `a_layers_own_effect_moves_where_its_art_is_hit`, `a_preview_off_sublayer_of_an_effected_layer_is_clicked_in_outline`, `a_painted_group_around_an_effected_symbols_instance_is_hit_where_its_art_is_drawn`, `an_intertwine_group_in_a_layers_drawn_art_is_hit_in_its_woven_order`, `a_click_in_a_plain_group_evaluates_only_its_member_with_effects`, `a_clip_groups_own_effect_moves_where_its_mask_outline_is_hit`, `an_isolated_clip_group_with_its_own_effect_is_marqueed_by_its_members_own_geometry` and `a_clip_groups_art_is_hit_when_its_drawn_art_holds_only_the_clipping_path` in `crates/doc/src/hit/tests.rs`, and `a_click_and_a_marquee_select_art_where_its_transform_effect_draws_it`, `a_click_selects_a_group_where_its_own_fill_paints_a_moved_member`, `a_marquee_takes_an_inner_groups_own_fill_inside_a_painted_group` and `a_marquee_takes_a_groups_own_fill_inside_a_painted_layer` in `crates/engine/src/tests/select_effects.rs`.
@@ -702,6 +718,7 @@ since 2026-10-01.
- **Escape in more tool drags:** Escape during an Anchor Point drag, a Mesh tool drag, a Direct Selection drag of a mesh point, a corner widget or the brackets of type on a path, or a Shape Builder drag cancels it: the art goes back to how the press found it, no undo step is added, the release does nothing, and the tool stays chosen. Escape during a Measure tool drag brings back the measurement before it. Regression tests: `escape_cancels_*` in `draw2/anchor/tests.rs`, `meshedit.rs`, `direct/tests.rs`, `builder/tests.rs` and `xform/measure.rs`, and `escape_cancels_an_anchor_point_mesh_shape_builder_or_measure_drag` in `tests/toolescape.rs`.
- **Shift-click on corner widgets (#5188):** with Direct Selection, when every corner of a path is selected (the path selected whole), a Shift-click on a corner widget picks that corner alone, so the next drag rounds just it. The other corners' widgets then hide; a Shift-click on another corner's anchor adds that corner and shows its widget, and a Shift-click on a showing widget deselects its corner. Adding a corner by Shift-clicking its widget while it is hidden stays open (#1232). Corner widgets are chosen by clicking one and Shift-clicking the others ([Logos By Nick, rounded corners in Illustrator](https://logosbynick.com/?p=15787)). Test: `corners::tests::a_shift_click_on_a_widget_of_a_whole_path_picks_its_corner`.
- **TIFF in screen and asset export:** both format menus expose the existing TIFF encoder and Format Settings. Headless UI regressions choose TIFF and check scaled dimensions, artboard selection, filenames, encoding options, saved settings and collected-asset output. Public reference: [Export for Screens](https://helpx.adobe.com/illustrator/desktop/save-and-export/export-files-to-different-formats/export-for-screens.html), updated 2026-09-28, lists TIFF for both artboards and assets. Adobe staff [confirmed support in 30.2.1](https://illustrator.uservoice.com/forums/333657-illustrator-desktop-feature-requests/suggestions/49081034-add-tiff-format-into-export-for-screens-assets-d) on 2026-02-19; the older 2025 Collect assets guide omits TIFF.
- **Lossy WebP with a Quality setting:** WebP Options has a Compression menu (Lossless, Lossy) and a Quality slider from 0 to 100 that is enabled for Lossy. Lossy writes a `VP8 ` WebP file, with an `ALPH` chunk that keeps the alpha exactly when some pixels are not opaque. `document.export`, `document.serialize` and Export for Screens take `lossless: false` with `quality` (default 90, VectorCraft's own value), in a format row or in `settings.webp`; Format Settings for WebP keeps both. Lossless stays the default, and a quality above 100 or one that is not a whole number is refused. Public reference: [export file format options](https://helpx.adobe.com/illustrator/desktop/save-and-export/export-files-to-different-formats/export-file-format-options-in-illustrator.html) describes Lossless and Lossy WebP and a Quality setting for Lossy (`webp_is_lossless_by_default_and_lossy_when_asked`, `lossy_webp_keeps_translucent_pixels`, `webp_quality_out_of_its_range_is_refused` in `crates/engine/src/cmd/fileio/tests_text.rs`, `webp_options_choose_lossless_or_lossy_at_a_quality`).
- **Export for Screens of the selected artboards:** while the Artboard tool is in use, File › Export › Export for Screens… (`file.exportForScreens`) opens with the artboards the tool has selected checked on its Artboards tab, and Export Artboard writes only those. Shift-clicks on the canvas, or Shift- or Ctrl/Cmd-clicks on the Artboards panel's rows, select several. The other fields show the settings the document last exported with. With another tool in use, the dialog takes its artboard choice from those settings too. Public reference: [Export selected artboards](https://helpx.adobe.com/illustrator/desktop/create-manage-artboards/organize-manage-artboards/export-artboards.html).
- **Effects in Export Selection and asset crops:** File › Export Selection, Asset Export, Export for Screens' Assets tab and CSS Properties' rasterized art crop each object to the bounds the renderer measures for what it draws: drop shadows, glows, geometry effects such as Offset Path, a group's own effects and the effects in a symbol's art. A brushed path is cropped to its visual bounds, and a Shaper group is cropped to the art it shows. `assets.list` reports the same crop. Engine tests export a square with each effect, a group with a shadow and an asset with a shadow, and check that the effect is inside the image. Public reference: a [Community Expert answer](https://community.adobe.com/t5/illustrator-discussions/exporting-assets-adds-transparent-borders/m-p/10708713/highlight/true) traces the extra area of exported assets to the raster effects' area (Document Raster Effects Settings › Add Around Object).
@@ -711,6 +728,7 @@ since 2026-10-01.
- **Effects in the art's bounds:** Export with Use Artboards off, Fit to Artwork Bounds, and the other exports of the whole art (EPS without artboards, Export for Screens' Full Document, Save for Web (Legacy) with Clip to Artboard off) measure each visible object as the export crops above do. The drop shadows and other effects of groups, layers, type and images are inside the image or the artboard. A Shaper group without effects of its own is measured by the art it shows, and the hidden members of a group with a drop shadow, a glow or another raster effect do not count unless it is a Shaper group or also has a geometry, Pathfinder, Crop Marks or 3D effect or a visible effect on its own fill or stroke. The SVG of an artboard keeps an object whose effects alone reach the artboard. Tests measure a group, type and an image with a drop shadow, export a group and type with Use Artboards off and fit an artboard to them.
- **EPS Save with Use Artboards:** Save As › EPS Options show Use Artboards with All or Range, for a separate file per artboard ([saving in EPS](https://helpx.adobe.com/illustrator/desktop/save-and-export/export-files-to-different-formats/save-artwork-in-eps-format.html)), unchecked by default (the scripting reference's EPS save options list `saveMultipleArtboards` with a default of false, [scripting reference](https://web.archive.org/web/20160803105056/https://wwwimages.adobe.com/content/dam/Adobe/en/devnet/illustrator/sdk/CC2015_3/Illustrator%20JavaScript%20Scripting%20Reference.pdf)). Unchecked, Save writes one file whose bounding box fits all the visible art, as Export does, without the artboards' background colors; when no art shows, the page is the first artboard in its color. An opened EPS saved back this way loses its page margins. Checked with two or more chosen artboards, the file at the path is the central file of the visible art and each artboard is also written to `<name>_<artboard>.eps` beside it. Checked with one chosen artboard, VectorCraft writes that artboard as the page of the file at the path alone (the behavior Save had since #4293). Evidence: `cmd::fileio::tests_artboard_fill::eps_save_draws_the_color_on_an_artboard_page`, `tests::save::eps_save_without_use_artboards_fits_the_box_to_art_past_the_artboard`, `tests::save::opened_eps_saves_to_its_own_file_around_its_art_or_on_its_page`, `tests::save::eps_save_with_use_artboards_writes_the_central_file_and_one_per_artboard`, `dialogs::save_options::tests::eps_save_as_shows_use_artboards_off_and_writes_the_art_or_the_artboard`.
- **EPS Options custom flattener settings:** the help page describes flattening an EPS's transparency with a preset or with custom options, adjusted through Custom ([saving in EPS](https://helpx.adobe.com/illustrator/desktop/save-and-export/export-files-to-different-formats/save-artwork-in-eps-format.html)). EPS Options now has Custom… beside the flattener Preset. It opens Custom Transparency Flattener Options on the settings the export would use: the raster/vector balance, both resolutions, the text and stroke outline switches, Clip Complex Regions and Anti-alias Rasters. OK goes back to EPS Options with the preset shown as [Custom], the export flattens with those settings, and the next EPS Options start from them; choosing a preset drops them, and Cancel goes back to EPS Options unchanged. Preserve Alpha Transparency stays off, and overprints are kept only with Overprints set to Preserve. The [Custom] label, the remembering, the Cancel behavior, Anti-alias Rasters and the ranges (balance 0 to 100, resolutions 1 to 2400 ppi) are VectorCraft's own. Evidence: `dialogs::tests_eps::custom_flattener_options_start_from_the_preset_and_cancel_goes_back_unchanged`, `custom_flattener_options_are_exported_and_remembered_until_a_preset_is_chosen`, `bad_custom_flattener_options_keep_the_dialog_open`.
- **Raster export backgrounds (#6125):** a raster export draws its background under the finished art, and blend modes read only the art below them, as on the canvas. An Outer Glow in Screen mode on the bare page shows in a PNG on white and in a JPEG. Flatten Transparency puts its white under the finished art the same way. Evidence: `tests::file::a_screen_outer_glow_is_in_raster_exports`, `tests::objectfx::a_screen_outer_glow_on_the_bare_page_shows_on_a_background`, `tests::knockout::page_knockout_and_isolated_blending`, `tests::knockout::no_blend_mode_reads_the_background`, `tests::cmykflatten::every_blend_mode_flattens_to_the_canvas_pixels_in_cmyk`.
@@ -726,6 +744,7 @@ since 2026-10-01.
- **Colour emoji with bitmap glyphs:** `sbix` (Apple Color Emoji) and `CBDT` (Noto Color Emoji) glyphs draw as their largest strike's PNG, placed with the type and unpainted by its fill; PDF writes them in Type 3 glyphs or as images, SVG as images with outlined text, EPS and legacy `.ai` as images, and Create Outlines makes embedded images. Synthetic test fonts in `crates/text/src/test_fonts.rs`; tests `crates/text/src/tests/bitmaps.rs`, `crates/render/src/tests/bitmapglyphs.rs`, `crates/svg/tests/it/colour_glyphs.rs`, `pdf::tests::colour_bitmap_glyphs_export_as_images`, the `eps` `colour_bitmap_glyphs_*` tests and `tests_pathops::create_outlines_turns_bitmap_glyphs_into_images`. COLR and OpenType SVG fonts remain.
- **COLR colour fonts:** v0 and v1 glyphs draw as vector layers (solid colours, linear and radial gradients, including ones that repeat or reflect, clips, blend modes, the foreground colour from the run's fill) on the canvas, as paths in SVG, EPS, legacy `.ai` and PDF with outlined text, as Type 3 text in PDF, and as editable groups with Create Outlines; sweep gradients, Porter-Duff compositing and radial gradients that repeat or reflect and start at a circle draw the glyph as an image. Measured by `tests_colr`, `render::tests_colrglyphs`, `pdf::tests::colr_glyphs_export_as_vector_art`, `svg/tests/it/colour_glyphs.rs`, `eps` `colr_glyphs_*`, `tests_pathops::create_outlines_turns_colr_glyphs_into_layer_groups`. Scores unchanged (estimated).
- **OpenType SVG colour fonts:** each glyph's SVG document is read by the SVG importer (registered by the engine) into vector art in the run's colours, then drawn, exported and outlined as COLR glyphs are; PDF real text writes them as text that draws nothing and draws their art where they sit. Measured by `tests_svg_glyphs`, `svg/tests/it/svg_glyphs.rs`, `tests_colourfonts::create_outlines_turns_svg_glyphs_into_groups`, `tests_colourfonts::pdf_real_text_draws_svg_glyphs_as_art_and_keeps_their_characters`. Scores unchanged (estimated).
- **OpenType SVG glyphs from a shared document:** when one SVG document holds many glyphs, the importer reads only the glyph's element and what it refers to (by `href` or `url(#id)`, through other elements, the elements holding them and every `<style>` sheet); a document whose references or sheets cannot be followed this way is read whole, as before. The art is unchanged. A glyph whose own colors are fixed no longer counts as using the text's color because another glyph in its document does, and a glyph nested where a namespace prefix means something other than at the root keeps its own meaning. For 50 glyphs of a 2,000-glyph document (278 KB), thread CPU time went from 547 ms to 113 ms (medians of 9 alternating runs in one process). Measured by `glyph::tests` in `crates/svg/src/glyph.rs` and `svg/tests/it/svg_glyphs.rs`. Scores unchanged (estimated).
- **Create Outlines keeps the type object's own appearance:** Type › Create Outlines and Object › Expand put the type object's own fills and strokes (the Appearance panel's items around its Characters row) on paths of the whole outline, below or above the glyph paths as that row places them, with one gradient across every glyph, so the outlines draw what the type drew; `object.expand.info` reports those strokes, pattern fills and gradient fills. Outlined characters keep their stroke and fill (the help page, <https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=337>); a type object's appearance is separate from its characters' (the help page, <https://helpx.adobe.com/illustrator/using/appearance-attributes.html>); where the object's items go is VectorCraft's own rule. Measured by `tests::pathops::create_outlines_keeps_the_objects_own_fills_and_strokes`, `tests::objexpand::create_outlines_draws_the_type_objects_own_paint`, `tests::objexpand::type_objects_own_stroke_pattern_and_gradient_are_reported`, `tests::objexpand::type_without_an_outline_reports_no_own_stroke_or_fill`, `tests::objexpand::a_stroke_under_an_unpainted_stroke_is_reported_and_outlined` and `tests::objexpand::expand_keeps_the_type_objects_own_paint`. Scores unchanged (estimated).
- **Create Outlines keeps the type object's own effects and transparency:** Type › Create Outlines gives the group of outlines the type object's own effects, once, in their order, with their settings and hidden effects still hidden, so they stay live and editable and the outlines draw what the type drew (a Warp or Free Distort effect moves a gradient on the characters across the whole outline, as on the type); the effects of the object's own fills and strokes stay on their paths of the whole outline. The group also takes the object's opacity, blend mode, Isolate Blending, Opacity & Mask Define Knockout Shape and opacity mask. Outlined characters keep their stroke and fill (the help page, <https://web.archive.org/web/20220911143322/https://helpx.adobe.com/pdf/cs6/illustrator_reference.pdf#page=365>); putting the object's effects on the group is VectorCraft's own rule. Measured by `tests::pathops::create_outlines_keeps_the_objects_own_effects_on_the_group`, `tests::pathops::create_outlines_keeps_the_objects_transparency_and_opacity_mask`, `tests::objexpand::create_outlines_draws_the_type_objects_own_effects` and `tests::objexpand::create_outlines_keeps_a_warped_character_gradient_across_the_type`. Scores unchanged (estimated).
- **Create Outlines keeps the characters' gradients across the type:** Type › Create Outlines and Object › Expand give every glyph, ruby glyph and underline or strikethrough bar the gradient its characters drew with: a gradient with no vector of its own stays fitted to the whole layout rather than to each glyph, and one with a vector keeps its place, both moved, scaled and rotated with the type; the characters' stroke keeps the weight it was drawn at on scaled type. `object.expand.info` measures gradient fills on the same paths. Outlined characters keep their stroke and fill (the help page, <https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=337>); the gradient fitted across the whole layout is VectorCraft's own rule. Measured by `tests::objexpand::create_outlines_keeps_a_character_gradient_across_the_type` and `tests::objexpand::expand_keeps_a_character_gradient_across_the_type`. Scores unchanged (estimated).
@@ -746,12 +765,15 @@ since 2026-10-01.
- **Text styles redefined to the defaults:** New and Redefine Character Style and Paragraph Style capture every attribute of the selected text, including those at their defaults (Auto kerning, Roman baseline alignment, the default Hyphenation options, the Every-line Composer, no tab stops), and `charStyle.setAttrs` and `paraStyle.setAttrs` keep an attribute set to its default value. After a redefinition, text whose value still equals the old definition's takes the new value, a default included; local overrides stay, and text that still has the old value of an attribute the new definition leaves out goes back to the Normal style's value. The style panels show "+" only where the text differs from its style, including type with Auto alignment. Public reference: [Character and paragraph styles](https://web.archive.org/web/20260825113735/https://helpx.adobe.com/illustrator/using/character-paragraph-styles.html).
- **Text styles dragged onto the panel's buttons:** a style dragged from the Character Styles or Paragraph Styles panel onto Create New Style is copied (`charStyle.duplicate`, `paraStyle.duplicate`, which name the copy `<name> copy`) and the copy is highlighted; dragged onto Delete it is deleted (`charStyle.delete`, `paraStyle.delete`); the Normal style is not deleted. Each drop is one undo step. Public reference: [Character and paragraph styles](https://web.archive.org/web/20261015081534/https://helpx.adobe.com/illustrator/using/character-paragraph-styles.html).
- **Auto Leading outside the layout:** a paragraph's Justification… › Auto Leading (<https://helpx.adobe.com/illustrator/desktop/design-with-text/edit-format-text/adjust-word-and-letterspacing-in-justified-text.html>) also sets the Leading the Character panel shows for Auto type (blank where the selected paragraphs differ), the leading the Alt+↑/↓ nudge (`type.step`) steps from, each paragraph's own, and the lines Fill with Placeholder Text counts in area type. Evidence: `ParaStyle::effective_leading` (`crates/doc/src/text.rs` test `paragraph_effective_leading_follows_auto_leading`), `tests_prefs::auto_leading_steps_and_fills_from_the_paragraph_auto_leading`, `panels::character` test `leading_field_shows_the_paragraph_auto_leading`.
- **Justification… on type on a path:** each paragraph's Desired Word Spacing, Letter Spacing and Glyph Scaling set its glyphs on type on a path as on point and area type, so the text after a wider gap starts further along the path, alignment and overflow use the spaced length, and a list marker keeps its width. Minimum and Maximum are not used on a path, and vertical type is not glyph scaled. SVG export writes such type as outlines with a warning. Tests `tests::justify::type_on_a_path_takes_desired_spacing_and_scaling`, `type_on_a_path_is_aligned_and_fitted_at_desired_spacing`, `vertical_type_and_list_markers_on_a_path_are_not_glyph_scaled` and the SVG test `text_layout::justification_spacing_on_a_path_is_outlined`. Public reference: the help page (<https://helpx.adobe.com/illustrator/desktop/design-with-text/edit-format-text/adjust-word-and-letterspacing-in-justified-text.html>).
- **Letter spacing and Full Justify between shaped clusters:** Desired Letter Spacing on any line, the letter spacing range of a justified line, and Single Word Justification's Full Justify add space only between shaped clusters, in horizontal, right-to-left and vertical type, so a combining mark stays on its letter and a Devanagari syllable's glyphs stay together. They add no space next to a zero-width format control (a soft hyphen, a bidi mark, embedding, override or isolate, a zero-width space, a joiner or non-joiner, a word joiner, a variation selector, a tag, the byte order mark), so a word wrapped in an override still reaches both edges of a justified line, and a Kinsoku push-in counts no gap at one either. A zero-width space is a line break opportunity but not a word separator ([CSS Text Level 3](https://www.w3.org/TR/css-text-3/#word-separator) does not list it), so a justified line gives it no share of its room. Desired Letter Spacing between the letters on either side of a zero-width space goes after the zero-width space, so a line that breaks there ends at its last letter, and the line breaker does not measure a gap after it. A line that Full Justify spreads and that ends in a drawn hyphen puts the same gap between its last letter and the hyphen. The cluster boundary is VectorCraft's own rule, based on the typographic character unit of [CSS Text Level 3](https://www.w3.org/TR/css-text-3/#typographic-character-unit). Tests `tests::justify::single_word_full_justify_keeps_combining_mark_with_base`, `desired_and_fitted_letter_spacing_skip_shaped_cluster`, `rtl_single_word_cluster_gap_follows_drawn_order`, `vertical_single_word_cluster_gap_follows_drawn_order`, `single_word_full_justify_keeps_conjunct_cluster`, `desired_letter_spacing_skips_bidi_format_controls`, `letter_spacing_and_full_justify_skip_joiners_and_soft_hyphens`, `format_controls_are_the_zero_width_default_ignorables`, `zero_width_space_takes_no_word_space_room`, `desired_letter_spacing_ends_a_line_broken_at_a_zero_width_space_without_a_gap`, `single_word_full_justify_spreads_up_to_the_drawn_hyphen` and `layout::wrapping_tests::kinsoku_shori_type_counts_no_gap_at_a_format_control`. Public reference: the help page (<https://helpx.adobe.com/illustrator/desktop/design-with-text/edit-format-text/adjust-word-and-letterspacing-in-justified-text.html>).
- **Justified lines with tabs:** a tab is not a word space, so a justified area type line no longer gives it a share of its room that no glyph draws. On a justified line with a tab, the text up to the last tab keeps its spacing, each tab keeps its stop and its leader stays in its gap, and the text after the last tab takes the room (word spaces first, then letter spacing, glyph scaling and the gaps between its letters), so the line ends on the far edge. A tab separates two words, so Single Word Justification does not align a word-tab-word line. Right-to-left lines take the text drawn after the last tab drawn, and vertical lines work down the column. Spreading the room after the last tab is VectorCraft's own rule. Tests `tests::justify::a_justified_line_with_a_tab_spreads_the_text_after_it_to_the_edge`, `a_justified_tab_keeps_its_leader_inside_its_gap`, `a_justified_word_tab_word_line_reaches_the_edge`, `the_last_line_with_a_tab_fills_the_measure_only_with_justify_all`, `a_justified_line_takes_its_room_after_its_last_tab`, `a_justified_vertical_line_with_a_tab_reaches_the_end_of_its_column`, `a_justified_right_to_left_line_with_a_tab_spans_its_measure` and `justified_point_type_with_a_tab_keeps_its_width`. Public reference: the help pages (<https://helpx.adobe.com/illustrator/using/formatting-paragraphs.html>, <https://helpx.adobe.com/illustrator/desktop/design-with-text/edit-format-text/adjust-word-and-letterspacing-in-justified-text.html>).
- **Show Hidden Characters marks every character that prints no ink:** [the help page](https://helpx.adobe.com/illustrator/desktop/design-with-text/special-characters-glyphs/insert-white-space-and-break-characters.html) lists the characters that Type › Show Hidden Characters makes visible: paragraph returns, forced line breaks, tabs, spaces, nonbreaking spaces, discretionary hyphens and the end of the text. Besides the dot over a space, ¶ at a paragraph's end and # at the story's end, the canvas draws an arrow across each tab's advance to its stop, a ring over a nonbreaking space (U+00A0) and a smaller one over a narrow nonbreaking space (U+202F), a short tick over the spaces of a set width (U+2000 to U+200A, U+205F, U+3000), ¬ at a discretionary hyphen (U+00AD) whether or not the line breaks there, and a bent arrow after a line that a forced line break (U+2028) ends, which gets no ¶. The marks follow the baseline of vertical type and of type on a path, ¶ goes at the left end of a right-to-left line, and type on a path gets # after its last character when the path shows all of its text. The shapes of the marks, and marking U+202F and the spaces of a set width, are VectorCraft's own rules. The marks are drawn only on the canvas and are not saved or exported. Tests: `canvas::tests::hidden_characters_mark_tabs_nonbreaking_spaces_and_discretionary_hyphens`, `hidden_characters_mark_forced_line_breaks`, `hidden_characters_mark_a_discretionary_hyphen_at_a_break_once`, `hidden_characters_follow_vertical_type`, `hidden_characters_end_a_right_to_left_line_at_its_left`, `hidden_characters_mark_type_on_a_path` and `show_hidden_characters_draws_every_kind_of_mark`.
- **The text style panel menus' Duplicate and Delete:** in the Character Styles and Paragraph Styles panel menus, Duplicate highlights the copy, as Create New Style highlights the new style, and Delete leaves no style highlighted, as the Delete button does, so Duplicate, Clear Overrides, Redefine and Style Options are disabled until another style is clicked. A highlighted style that is renamed in Style Options or deleted by a command is no longer highlighted either. The tests `panels::text_styles::tests::panel_menu_duplicate_and_delete_update_the_highlighted_style` and `a_highlighted_style_that_is_no_longer_listed_is_not_highlighted` cover this. Public reference: [Character and paragraph styles](https://web.archive.org/web/20261015081534/https://helpx.adobe.com/illustrator/using/character-paragraph-styles.html).
- **Names of new styles and symbols:** `charStyle.new` and `paraStyle.new` trim the white space around the name they are given, as `charStyle.rename` and `paraStyle.rename` do, and refuse a name that is then empty; Duplicate names its copy from the trimmed name. `symbol.new` and `symbol.duplicate` trim the name as Symbol Options does, and `library.use` adds a library's text style under its trimmed name. Public reference: [Character and paragraph styles](https://web.archive.org/web/20260825113735/https://helpx.adobe.com/illustrator/using/character-paragraph-styles.html).
- **Naming a new text style first:** Alt-click on New in the Character Styles or Paragraph Styles panel opens New Character Style or New Paragraph Style (`ui.newCharStyle`, `ui.newParaStyle`) with the name a plain click's style gets; OK makes the style from the text selected when the dialog opened, and Cancel adds none. Tests `panels::text_styles::tests::alt_clicking_new_character_style_asks_for_its_name` and `alt_clicking_new_paragraph_style_asks_for_its_name`. Public reference: [Default keyboard shortcuts](https://web.archive.org/web/20260726060015/https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html), which lists Alt-click for opening panel options and names Actions, Brushes, Swatches and Symbols as exceptions.
- **Moving all tab stops:** in the Tabs panel, a stop dragged on the ruler with Ctrl held (Command on macOS) moves every stop by the same distance, in one `text.tabs.set` and one undo step; the stops keep their order, alignment and leaders, the ruler shows them moving during the drag, and a drag that would take the leftmost stop below 0 leaves it at 0, or the rightmost past 100,000 pt leaves it at 100,000 pt, with the other stops at their spacing from it. A drag that leaves every stop where it was records no undo step. Ctrl must be held when the drag starts. Tests `panels::tabs::tests::command_drag_moves_all_the_stops_together`, `command_drag_stops_at_zero_and_keeps_the_spacing`, `command_drag_stops_at_the_largest_position_and_keeps_the_spacing` and `a_drag_that_moves_no_stop_records_no_undo_step`. Public reference: [Manage tab stops](https://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/manage-tab-stops.html), which says that a Ctrl-drag (Windows) or Command-drag (macOS) of a tab moves all the tab stops at the same time.
- **Tab stop drag guide:** while a stop is dragged on the Tabs panel's ruler, the canvas draws a line through the text whose stops the ruler shows, where the stop would land: across the frame cell the paragraph starts in for area type, measured from where the frame lets the paragraph's first line start (the cell's edge inside the inset, or past a text wrap object), and across the paragraph's lines from the type's origin for point type. It turns with rotated type and runs across the columns of vertical type. In a Ctrl-drag (Command on macOS) it follows the grabbed stop. No line is drawn while a release would delete the stop, and the line goes on release, on Escape, when no button is down, and when the panel is closed. It is not a document object and records no undo step. Its extent, color and these rules are VectorCraft's own. A stop drag whose release the ruler does not get also ends then, as a marker drag already did. Tests `panels::tabs::tests::dragging_a_stop_draws_a_guide_through_the_text`, `a_command_drag_guide_follows_the_grabbed_stop`, `the_stop_guide_ends_with_the_drag`, `the_stop_guide_follows_rotated_point_and_vertical_type` and `the_stop_guide_starts_where_a_wrap_object_lets_the_line_start`. Public reference: [Manage tab stops](https://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/manage-tab-stops.html), which describes a guide shown through the selected text during a tab stop move.
- **Tabs indent markers on threaded frames:** when a marker drag gives the paragraphs of a threaded story values of their own, the Tabs panel sends one `text.setFormat {paragraphIndents}` with an entry for each paragraph of the story, whatever order the frames were selected in with the Selection tool, so the story flows through its frames again once rather than once for each paragraph, and a drag that changes no paragraph runs nothing; a paragraph that runs on from one frame into the next gets one entry, after Type tool Select All too. A selected story is one text: with the Selection tool, a marker drag on any of its frames sets every paragraph of the story, in its locked and hidden frames too. Tests `panels::tabs::tests::indent_markers_on_selected_threaded_frames_follow_the_story_and_set_a_split_paragraph_once`, `indent_markers_over_many_threaded_paragraphs_send_one_format_command`, `indent_markers_after_select_all_list_a_split_paragraph_once`, `indent_markers_on_some_threaded_frames_list_the_whole_story_once`, `indent_markers_on_one_threaded_frame_set_its_locked_and_hidden_frames`, `cmd::threads::tests::paragraph_indents_flow_a_threaded_story_once_as_one_command_per_paragraph_would`, `paragraph_indents_over_thousands_of_paragraphs_flow_the_story_once` and `paragraph_indents_check_every_entry_and_skip_a_change_that_changes_nothing`, and `cmd::typecmd::area_tests::set_format_refuses_a_param_of_the_wrong_type`. Public reference: [Indent text](https://helpx.adobe.com/illustrator/desktop/design-with-text/edit-format-text/indent-text.html).
- **Width Point Edit:** Shift-double-click enables Adjust Adjoining Width Points; plain double-click and direct opening retain the default. Tool dispatch and headless dialog tests cover neighboring widths, Undo/Redo and Cancel. Public reference: [Variable-width strokes](https://helpx.adobe.com/illustrator/using/stroke-object.html).
Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a feature lands.
@@ -765,6 +787,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **Smooth widths between width points (#5714):** a variable-width stroke changes width along a smooth curve from one width point to the next, where it used to run in a straight line and turn a corner at each point. The public description is that the path "gradually gets wider or narrower from one point to the next" in "a flowing, continuous curve", and that stacked points make a sharp break ([Peachpit, Expressive Strokes](https://www.peachpit.com/articles/article.aspx?p=2979069)); the exact curve is not documented, so each side follows a monotone cubic (Fritsch–Carlson): no kink at a point, flat where a point is wider or narrower than both neighbours, never past the points either side, points on one line kept on it. The outline samples straight runs between width points closely enough to follow the curve to the drawing tolerance (at most 64 samples per span and 4,096 per piece). Presets with a middle point (Lens, Pinch, Teardrop, Wave) look softer; two-point tapers are unchanged. Tests: `appearance::profile::tests::{widths_run_smoothly_through_width_points, widths_never_pass_the_points_either_side, a_step_ends_the_curve_on_each_side, widest_covers_every_width_along_the_profile}`, `stroke::width::tests::{a_straight_run_follows_the_curve_between_width_points, samples_between_width_points_are_capped}`.
- **Stroke gradients where a variable-width stroke meets itself (#5960):** with a gradient along or across a stroke that has a width profile, where the stroke crosses itself the later part paints over the earlier one only where the two overlap, and a narrow part running close beside a wide one leaves its edge alone. Each slice of the gradient reaches as far as the stroke is wide where it sits (for a dashed stroke, as wide as it gets within the reach of a cap or dot, found in one pass along the path, so a densely flattened path costs no more per point), where it used to reach as far as the stroke is wide anywhere and paint a square of its colour over the wider part. Strokes without a profile are unchanged. Tests: `stroke::tests_gradient::a_narrow_pass_over_a_wide_one_paints_only_where_they_overlap`, `a_narrow_pass_beside_a_wide_one_leaves_its_edge_alone`, `a_densely_flattened_dashed_pass_beside_a_wide_one_leaves_its_edge_alone` and `widest_ahead_is_the_widest_within_the_window`, with the existing coverage tests (joins, caps, arrowheads, profiles, dashes, aligned strokes).
- **Width strokes zoomed out (#995):** a stroke with a width profile keeps its shape while the view zooms out. The canvas keeps a hairline visible (at least half a device pixel); for a profiled stroke it is the profile's widest point that gets that minimum, not the weight, so a 1 pt stroke with a 6x width point is no longer drawn twice as thick at 25% zoom than at 100%. Plain strokes are unchanged. Test: `render::tests::widthzoom`.
- **Wide curved stroke edges:** the canvas and raster exports draw a stroke at least 32 drawing tolerances wide along curves that span 128 tolerances or more with the rims of its outline closer to the curves, so the outer rim no longer draws too light and the inner rim too dark. That is 8 and 32 device pixels at 25% and 1:1, and as little as just over 4 and 16 device pixels at other zooms. At 25% zoom an 80 pt ring's worst edge pixel is 24 levels off the exact coverage at the outer rim and 32 at the inner rim, where it was 54 and 61. Fills, narrower strokes, strokes with a width profile, strokes in an unevenly scaled view and vector exports are unchanged. Tests: `render::tests::curvedstrokeedges`, `render::tests::longstroke::a_long_wide_curved_stroke_draws_the_same_pixels_outlined_near_the_view`.
- **Ruler double-click (#5239):** a double-click (both clicks on that ruler) on the top ruler adds a vertical guide at the pointer's x and one on the left ruler a horizontal guide at its y (swapped in a view turned 90°, where the rulers read the other document axis; the nearer axis in between), through `guide.add` in one undo step; the guide is not snapped, is shown even when guides were hidden, and is an artboard guide with the Artboard tool, as a drag from a ruler makes one. The [public page on rulers](https://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/use-rulers.html) doesn't describe the gesture, so it follows the request in #5239. egui frame tests cover both rulers, a lone click, Undo, a canvas click before a ruler click, and rotated views.
- **Rulers (#1212):** drag the intersection to preview and set a document zero point, snapped as a drawn point is (with Smart Guides onto the art's and the artboards' anchors, centres, edges and paths or into line with them, with Snap to Point along the ruler guides, else to pixels or the grid), or double-click it to reset to the active artboard's top-left. Transform, Properties and Control X/Y fields measure from it and convert entered positions back to absolute command coordinates. The origin survives every native format version and compression; geometry, guides and patterns stay in place. Public reference: [Use rulers](https://helpx.adobe.com/ca/illustrator/desktop/measure-and-align/grids-and-guides/use-rulers.html).
- **Global and artboard rulers:** View › Rulers › Change to Global / Artboard Rulers (Cmd+Alt+R, `view.globalRulers`). A new document has artboard rulers: the rulers and the Transform, Properties, Control and Info X/Y count from the active artboard's top-left corner, or the zero point dragged out for that artboard, which moves with it; with global rulers one document zero point serves every artboard. Guide readouts and Shift ruler-tick snapping follow the same zero point. The mode is saved with the document; files from before it open with global rulers, as they measured. Regression tests: `engine/tests/it/ruler_origin.rs`, `ui-egui/src/tests/ruler_origin.rs`, `tools/src/rulerguide.rs`. Public reference: [About rulers](https://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/about-rulers.html).
@@ -773,6 +796,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **Fade Region Outside Artboard:** Artboard Options' Global checkboxes Fade Region Outside Artboard and Update While Dragging ([user guide, Artboard options](https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf)) are application preferences (`fadeRegionOutsideArtboard`, `artboardUpdateWhileDragging`), both on by default. While the Artboard tool is active the canvas draws everything outside the artboards, the pasteboard and the art on it, with each color channel at 60% of its value (VectorCraft's own amount), or only outside the box around all the artboards when crossing artboards would leave more than 4,096 rectangles in view; with Update While Dragging off it draws as usual during an artboard move or resize. Presentation Mode, exports and print do not change. Regression tests: `canvas::tests` (`the_artboard_tool_fades_the_pasteboard`, `presentation_mode_draws_no_fade`, `the_fade_darkens_art_on_the_pasteboard_and_not_on_the_artboard`, `outside_rects_cover_the_bounds_minus_the_boards`, `outside_rects_of_a_row_of_boards_stay_few`, `the_fade_of_crossing_boards_stays_bounded`, `update_while_dragging_keeps_or_drops_the_fade_during_an_artboard_drag`, `the_pasteboard_fade_leaves_exports_unchanged`), `dialogs/tests.rs` (`artboard_options_global_checkboxes_set_the_preferences`, `artboard_options_error_leaves_the_global_preferences_unchanged`).
- **Saved views (G7):** View › New View… and Edit Views… ([public source](https://helpx.adobe.com/illustrator/using/viewing-artwork.html): up to 25 views per document, saved with it, renamed or deleted in Edit Views, chosen from the bottom of the View menu). Each view keeps the zoom, centre and rotation; the View menu lists all 25 (`view.goto1`–`view.goto25`), and Edit Views… lists them to rename or delete, applied together as one undo step. A file's views are checked when it opens (at most 25, unique names up to 255 characters, a finite centre and a positive zoom). Tests: `saved_views_round_trip_and_from_a_file_are_tidied` (`crates/format/tests/prop_format.rs`), `crates/engine/src/cmd/views.rs`, `crates/ui-egui/src/dialogs/edit_views.rs` and `every_saved_view_is_listed_at_the_bottom_of_the_view_menu` (`crates/ui-egui/src/menus.rs`).
- **Window › Arrange › Tile (G7):** Tile (`window.arrange.tile`) shows every open document at once, edge to edge in the document area ([public source](https://helpx.adobe.com/illustrator/using/viewing-artwork.html)), one pane each in a grid of as many columns as the square root of the number of documents, rounded up, each fitted to its pane. The current document's pane is the canvas; the other panes draw their documents with their artboards, guides and selected objects, and a press in one makes its document the current one. Consolidate All Windows (`window.arrange.consolidateAllWindows`) shows one document under its tab again. The grid and when the two items are enabled (Tile with two documents or more, Consolidate All Windows while they are tiled) are VectorCraft's own. Tests: `crates/ui-egui/src/canvas/panes/tests.rs`.
- **Arrange Documents (G7):** the application bar's Arrange Documents button arranges the open documents in grid and tile layouts ([public source](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/workspace-overview.html)). Its menu, and Window › Arrange, have Consolidate All Windows, Tile (the grid), Tile All Vertically (side by side), Tile All Horizontally (stacked) and the 2-Up, 3-Up, 4-Up and 6-Up layouts, which show that many documents and leave the others under their tabs, the current one in the last pane (`window.arrange.tile {layout}`). The set of layouts and how each places the panes are VectorCraft's own. Tests: `crates/ui-egui/src/canvas/panes/tests.rs`.
- **Window › Arrange › Float in Window, Float All in Windows and Cascade (G7):** documents float in windows of their own, out of the tab strip ([public source](https://helpx.adobe.com/illustrator/using/customizing-workspace.html)). Float in Window (`window.arrange.floatInWindow`) floats the current document, Float All in Windows (`window.arrange.floatAllInWindows`) every tabbed one, and Cascade (`window.arrange.cascade`) floats every document and stacks the windows from the upper left to the lower right ([public source](https://helpx.adobe.com/illustrator/using/viewing-artwork.html)). On the desktop each window is an OS window; on the web and on Wayland it is a window inside the app's window. The window of the current document holds the canvas; the others draw their documents as Tile's panes do, and a press in one makes its document the current one. Closing a window closes its document, asking to save unsaved changes. Consolidate All Windows brings every document back under the tabs, and Tile brings them back into its grid. The cascade's 30 pt step, the windows' size and when the items are enabled (Cascade with two documents or more, Float in Window for a tabbed current document, Float All in Windows while a document is tabbed, Consolidate All Windows while documents are tiled or floating) are VectorCraft's own. Tests: `crates/ui-egui/src/doc_windows/tests.rs`.
- **Dragging a document tab out and a document window back (G7):** a document tab dragged more than 24 pt above or below the tab strip floats its document in a window under the pointer, and a document window dragged onto the tab strip goes back under the tabs ([public source](https://helpx.adobe.com/illustrator/using/customizing-workspace.html)). A window inside the app's window is dragged by its title bar; an OS window by the document's tab at its top, and the window follows the pointer. The 24 pt distance and the tab at the top of an OS window are VectorCraft's own. Tests: `crates/ui-egui/src/doc_windows/tests.rs`.
- **Reordering document tabs (G7, #5663):** a document tab dragged along the tab strip moves its document among the others ([public source](https://helpx.adobe.com/illustrator/using/customizing-workspace.html)); a line marks the gap it goes in. The current document stays current, each document keeps its own zoom, centre and artboard, the views Window › New Window opened move with their document, and Window › Next/Previous Document follow the new order. `document.move` (`{from?, to}`) does the same from MCP, the control channel and recordings. `crates/ui-egui/src/tests/tab_reorder.rs`, `crates/engine/src/tests/document_move.rs`.
@@ -783,6 +807,11 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **Preferences › User Interface › Open Documents As Tabs (G7, #394):** checked by default, documents open under tabs in one document window ([public source](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/workspace-overview.html)). With the box cleared, each document opened or created afterwards opens in a floating window of its own, at the next cascade place, as Float in Window floats it; documents already open stay where they are, and checking the box again leaves floating documents in their windows. Tests: `crates/ui-egui/src/doc_windows/tests.rs`.
- **Preferences search:** a Search Preferences field above the category list has the keyboard focus when the dialog opens, and Cmd/Ctrl+F gives it back; typing lists the settings it finds, and choosing one shows its category, as the [help page](https://helpx.adobe.com/illustrator/desktop/get-started/preferences-and-settings/set-app-preferences.html) describes. VectorCraft's own rules: the field matches a setting's label, section or category, ignoring case, in the interface language or in English; the list replaces the categories while the field has text and shows every match, or "No settings found"; the chosen setting's row is highlighted and scrolled into view; Escape in the field with text clears it, and Escape in the empty field closes the dialog. The dialog's `__search` field (`ui.dialog.set`) holds the text. Tests: `crates/ui-egui/src/prefs_dialog/tests.rs`.
- **Reset Preferences asks first (#6435):** the Preferences dialog's Reset Preferences button opens a question over the dialog (`resetPreferences`). Cancel or Escape goes back to Preferences unchanged, with its category, search and edits kept; OK goes back with every preference at its default value, which OK in Preferences applies and Cancel there discards. The question and its wording are VectorCraft's own. Tests: `crates/ui-egui/src/prefs_dialog/tests.rs`.
- **Preferences › General describes its settings:** the line under the Preferences fields shows a sentence for each of the 32 General settings, Enable Contextual Task Bar included, when the pointer is over the setting's row or its control has the keyboard focus, and a screen reader gets the same sentence. The sentences are VectorCraft's own and state what the app does with each setting. Sentences: `crates/ui-egui/src/prefs_dialog/descriptions.rs`. Tests: `crates/ui-egui/src/prefs_dialog/tests.rs`.
- **Preferences › Selection & Anchor Display describes its settings:** the line under the Preferences fields shows a sentence for each of the 14 Selection & Anchor Display settings, from Tolerance to the Curvature Tool rubber band, on hover and on keyboard focus, and a screen reader gets the same sentence. The Snap to Point sentence states that the Smart Guides Snapping Tolerance applies while Smart Guides is on. Sentences: `crates/ui-egui/src/prefs_dialog/descriptions.rs`. Tests: `crates/ui-egui/src/prefs_dialog/tests.rs`.
- **Preferences › Guides & Grid describes its settings:** the line under the Preferences fields shows a sentence for each of the 12 Guides & Grid settings, from Snap to Grid to Pattern Editing's Tile Edge Color, on hover and on keyboard focus, and a screen reader gets the same sentence. The Show Pixel Grid sentence states that the pixel grid shows from 600% zoom. Sentences: `crates/ui-egui/src/prefs_dialog/descriptions.rs`. Tests: `crates/ui-egui/src/prefs_dialog/tests.rs`.
- **Preferences › Smart Guides describes its settings:** the line under the Preferences fields shows a sentence for the Smart Guides box and for each of the 14 Smart Guides settings, from Color to Snap to Perpendicular, on hover and on keyboard focus, and a screen reader gets the same sentence. The sentences state VectorCraft's own behavior: Pixel Preview turns Smart Guides off and Snap to Grid snaps instead; with Alignment Guides off, art still lines up without the line; Object Highlighting outlines only an unselected object while a selection tool is not dragging; Snapping Tolerance is a distance on screen at every zoom; Snap to Last Location does not return a copy. Units, General, Selection & Anchor Display, Guides & Grid, Smart Guides and Type have sentences, and the other categories leave the line empty. Sentences: `crates/ui-egui/src/prefs_dialog/descriptions.rs`. Tests: `crates/ui-egui/src/prefs_dialog/tests.rs`.
- **Preferences › Type describes its settings:** the same line shows a sentence for each of the 23 Type settings, from Size/Leading to Measure Type by Glyph Bounds, when the pointer is over the setting's row or its control has the keyboard focus, and a screen reader gets the same sentence. Each sentence is VectorCraft's own and states what the app does with the setting: for example, which keys step by each increment, which panels show the East Asian and Indic options, and that the two pink highlights show only on screen. Sentences: `crates/ui-egui/src/prefs_dialog/descriptions.rs`. Tests: `crates/ui-egui/src/prefs_dialog/tests.rs`.
- **Window › New Window (G7, #4116):** New Window (`window.newWindow`) opens another view of the current document ([public source](https://helpx.adobe.com/illustrator/using/viewing-artwork.html) describes showing one document in several windows at once), with its own zoom, center, rotation, artboard and Outline or Preview, as a tab of its own; an edit in one view shows in every view. Tile, Cascade, Float in Window, Float All in Windows and Consolidate All Windows arrange each view as they arrange a document, and Next and Previous Document step through the views. Closing a view leaves the document open; closing its last view closes the document, asking to save it first. The view's number after the name in its tab ("Name:2", while the document has more than one view) is VectorCraft's own. Tests: `crates/ui-egui/src/doc_windows/tests.rs`.
- **Document Setup modal handoff:** Document Setup → Edit Artboards applies valid settings, closes the dialog and activates the Artboard tool. Pointer-click tests cover successful handoff, invalid settings, OK, Cancel and Undo in `dialogs/document_setup.rs`.
@@ -829,6 +858,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- Variables: Lock Variables (`variable.lock`, in the Variables panel's bottom bar and menu) stops variables from being defined, deleted or renamed until they are unlocked, while objects can still be bound and unbound and data sets still change and apply; the lock is saved with the document.
- Variables: the Variables panel lists its variables in three columns with headers (type, Variables, Objects), and a click on a header sorts the list by variable type, variable name or bound object name, with a second click reversing the order (`variable.sort`; `variable.list` follows the order), as the [Variable panel overview](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/variable-panel-overview.html) describes.
- Variables: the Data Set box at the top of the Variables panel takes typed text, and a new name entered there renames the current data set with `dataset.rename` in one undo step; the same name adds no undo step, an empty or taken name is refused with a status message, and the list button beside the box still chooses a data set.
- Variables: the Variables panel builds its rows (each variable's bound objects and object name in the list's order, and each data set's value count, current mark and italics) once for each version of the document, and again when the list's order, Identify Objects By, the interface language or the new art on a locked artboard changes, instead of on every frame while the panel is open. The rows are the same as before. Tests `frames_without_a_change_build_the_rows_once` and `each_input_of_the_rows_builds_them_again` in `panels::variables`; the ignored test `rows_timing` compares the time of the two.
- Batch…: Override Save and Override Export name each file with the extension of the format the step writes, however the step spells the format (`.svg` and `SVG` give `.svg`, `png8` gives `.png`), in `action.batch`.
- Batch…: Override Export writes the files of an Export for Screens or Export Assets step into a folder for each source file or data set inside the destination folder, under the names the export gives them (`action.batch`). The folder and file names drop trailing periods and spaces (`a..svg` gives `a`). When two source files would get the same name that way (compared without case), or a later file's folder or file would take the name of an output an earlier file wrote, of a source file in the destination folder or, for data sets, of a file already there, Batch adds `-2`, `-3`… to the later one's name.
- Batch…: when a step fails on a file or data set, the error names the step by its place in the action's steps, from 1, counting the Open steps the batch skips (`action.batch`). This numbering is VectorCraft's own rule. Tests `cmd::fileio::action_batch::tests::{a_folder_batch_error_names_the_step_in_the_commands_sent, a_recorded_open_that_fails_is_the_first_step, a_data_set_batch_error_names_the_step_in_the_commands_sent, a_redirected_export_that_fails_keeps_its_place, a_source_that_does_not_open_names_no_step}`.
@@ -849,11 +879,13 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- Actions panel: the panel menu's Insert Stop… opens Record Stop, with a Message box and Allow Continue, and adds a stop to the recording in progress, after the selected command, or at the end of the selected action ([Insert stops in actions](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/insert-stops-in-actions.html); `ui.action.insertStop`). A playing action waits at the stop and shows the message so the user can do a manual task, and Play Current Selection plays the rest ([Illustrator CS5 help](https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=459); `ui.action.continue`). With Allow Continue, the message box also has Continue. VectorCraft's own rules, which the pages do not cover: an empty message still waits, Stop Playing/Recording ends the playback and keeps the steps already played, the rest plays on the document active then, a stop waits at every playback speed, at Accelerated the steps between two stops are one undo step, Batch… refuses an action with an included stop, and Delete Selection on a selected step deletes that step, a stop or a command, without asking (`ui.action.deleteStep`).
- Actions panel: the panel menu's Insert Menu Item… adds a menu command to the recording in progress, after the selected step, or at the end of the selected action, without running it, and playback runs it as the menu does ([Insert non-recordable tasks into actions](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/insert-non-recordable-tasks-into-actions.html); `ui.action.insertMenuItem`). The dialog's Find box picks the one item that matches the words typed, and a click on a listed item picks it. VectorCraft's own rules, which the page does not cover: items that open a dialog, Image Trace's Make and Make and Expand, Pattern's Make and Edit Pattern, and the File, Window and Help menu items are not listed, and an action holds at most 10,000 steps and its set file at most 8 MiB, for stops too.
- Actions panel: Insert Menu Item… also lists the Object › Align items and the View menu commands that act on the window rather than the document (Outline, Pixel Preview, Trim View, Presentation Mode, Screen Mode, zoom, fit, Rotate View, and the show, hide and snap items), which the help page names among the commands that cannot be recorded ([Insert non-recordable tasks into actions](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/insert-non-recordable-tasks-into-actions.html); [Align and distribute objects](https://helpx.adobe.com/illustrator/desktop/manage-objects/arrange-objects/align-and-distribute-objects.html); `ui.action.insertMenuItem`, `ui.action.play`). VectorCraft's own rules, which the pages do not cover: an Align step keeps the Align To choice of its insertion, and one that aligns to the key object stops the playback when there is no key; a View menu step plays in its place at every speed and adds no undo step, so at Accelerated the steps on each side of it are one undo step each; Batch… refuses an action with one; and a set file with one is version 6. Tests `panels::actions::tests::{an_inserted_view_item_plays_in_its_place_at_accelerated, an_inserted_view_item_plays_step_by_step_and_with_pauses, an_inserted_view_item_plays_up_to_a_stop, a_view_step_played_while_recording_is_recorded, a_saved_view_step_survives_as_version_6, an_inserted_align_item_keeps_the_align_to_of_its_insertion, an_align_step_to_the_key_object_fails_without_a_key}`.
- Actions panel: the error of a played step that fails names the step by its place in the expanded action, 1 for the first step, counting excluded steps and stops, at every playback speed and after a stop (`ui.action.play`, `ui.action.continue`). A failing step of a recorded batch is named by the batch's place and its own command. The numbering is VectorCraft's own rule. Tests `panels::actions::tests::{an_error_after_a_view_item_names_the_step_in_the_action, a_failing_view_item_names_the_step_in_the_action, an_error_counts_excluded_steps, an_error_in_a_recorded_batch_names_the_batch_step, an_error_of_the_whole_batch_names_no_step, a_paced_error_names_the_step_in_the_action, an_error_after_a_stop_names_the_step_in_the_action}`.
- Actions panel: with a path selected, the panel menu's Insert Select Path adds a step that selects that path to the recording in progress, after the selected step, or at the end of the selected action, without changing the selection ([Insert non-recordable tasks into actions](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/insert-non-recordable-tasks-into-actions.html); `ui.action.insertSelectPath`, `select.storedPath`). VectorCraft's own rules, which the page does not cover: the selection must be one whole path or compound path that can be selected, the step stores the path's id and a fingerprint of its anchors, and playback selects the path only while it is still there unchanged and can be selected, else the step is an error and the selection stays; the row reads Select Path, and a set file with the step is version 5.
- Actions panel: the panel menu's Select Object… opens Set Selection, where the note typed names the objects to select, and adds a step to the recording in progress, after the selected step, or at the end of the selected action; playback selects the objects whose Attributes note matches it, and the steps after it act on them ([Insert non-recordable tasks into actions](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/insert-non-recordable-tasks-into-actions.html); `ui.action.insertSelectObject`, `select.byNote`). VectorCraft's own rules, which the page does not cover: the note matches anywhere and in any letter case unless Case Sensitive or Whole Word is checked, hidden and locked objects are left out, the objects found replace the selection, a step that finds none stops the playback with an error, and the note is at most 1,024 bytes. Action sets with the step save as version 4.
- Actions panel: Delete Selection deletes the selected action set with its actions and keeps the other sets ([Actions panel overview](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/actions-panel-overview.html); `ui.actionSet.delete`). VectorCraft's own rules, which the overview does not cover: deleting a set asks first, Shift-click on a set's name selects a range of sets to delete together, the panel menu's Delete does the same, and Default Actions and the last set can be deleted. Undo does not bring a deleted set back.
- Actions panel: the panel menu's Duplicate copies the selected action, else the current action set with all its actions ([Actions panel overview](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/actions-panel-overview.html); `ui.actionSet.duplicate`). VectorCraft's own rules, which the overview does not cover: the copy goes right after the original, is named after it with " copy" added and is selected.
- Actions panel: the panel menu's Reset Actions asks first; OK replaces the sets in the panel with the default set, and Append adds the default set after them ([the help page](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/manage-a-set-of-actions.html); `ui.actionSet.reset`). VectorCraft's own rules, which the page does not cover: the default set is VectorCraft's own Default Actions set; after OK it is current and selected, and no action or step is selected; Append names its copy with the next free number (`Default Actions 2`) and keeps the current set; Cancel changes nothing; the item is off while an action records or plays, waiting at a stop included; Undo does not bring the old sets back. Tests `panels::actions::tests::{the_panel_menus_reset_actions_asks_first_and_is_off_while_an_action_runs, reset_replaces_every_set_with_the_built_in_set_and_clears_what_named_the_old_ones, reset_on_the_built_in_set_makes_it_current_then_changes_nothing, reset_append_adds_the_built_in_set_with_a_free_number_and_keeps_the_rest, reset_refuses_bad_params_and_a_running_action_and_changes_nothing}`, `dialogs::tests::reset_actions_ok_replaces_append_adds_and_cancel_keeps_the_sets`.
- Actions panel: the panel menu's Replace Actions… opens a file and puts the set it holds in place of every set in the panel ([the help page](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/actions-panel-overview.html); `ui.actionSet.replace`). VectorCraft's own rules, which the page does not cover: the file is read as Load Actions… reads it (`.vcactions` and `.aia`, with the same limits and reports); the built-in Default Actions set goes too; the file's set keeps its name and becomes current and selected, and no action or step is selected; a canceled pick, a file that can't be read or is refused (an empty one too) changes nothing; the item asks no question first and is off while an action records or plays, waiting at a stop included; Undo does not bring the old sets back. Tests `panels::actions::tests::{the_panel_menus_replace_actions_puts_the_files_set_in_place_of_every_set, replace_actions_clears_what_named_the_old_sets_and_reads_aia_files, replace_actions_refuses_bad_params_bad_files_and_a_running_action}`.
- Batch… over data sets names each file after the document and the data set (`action.batch`). It writes `/`, `\`, `:`, `<`, `>`, `"`, `|`, `?`, `*` and control characters in the data set's name as `-`, and adds `-2`, `-3`… to a name an earlier data set used.
- Batch… offers File + Number, File + Data Set Name, and Data Set Name for a Data Sets source. The dialog defaults to File + Number; `action.batch` without `datasetFileNaming` keeps File + Data Set Name. An output already in a destination folder the batch may read and write gets the next free `-2`, `-3` suffix. [Batch options](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/batch-options.html).
- The Batch dialog shows its data set File Name row only when Destination is Folder, and keeps the choice while another destination is picked. With None or Save and Close it does not send `datasetFileNaming`.
@@ -863,8 +895,11 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- Export for Screens artboard names can be double-clicked to rename them in grid or list view (#7275). Enter, a click outside the field or switching to Assets commits the name; Escape cancels the edit. The dialog stays open, checked artboards stay selected and the rename is undoable. The typed name goes to the artboard that was double-clicked even when the artboards change order while it is typed; the field closes when its artboard is deleted or another document becomes active. Evidence: `dialogs::tests_screens::double_clicking_an_artboard_name_in_export_for_screens_renames_it`, `dialogs::tests_screens::switching_export_tabs_commits_an_artboard_name`, `dialogs::tests_screens::an_artboard_name_follows_its_artboard_while_it_is_typed` and `dialogs::tests_screens::an_artboard_name_stays_with_its_document`.
- Asset Export panel menu: Create Sub-folders (on by default) and Open Location after Export are check items that set the dialog's two checkboxes (`assets.settings.set {subfolders, openLocation}`), and the panel's Export follows them, including a folder per format or item that Export for Screens remembers (3D assets' mesh files go in the folder itself); Format Settings… opens Export for Screens on the first row's format settings ([Asset Export panel](https://helpx.adobe.com/illustrator/desktop/save-and-export/export-files-to-different-formats/collect-and-export-assets-from-asset-export-panel.html)). Tests: `panels::tests_asset_export`.
- Export for Screens is laid out as the reference app's dialog: on the left the Artboards and Assets tabs (thumbnails with their checkboxes, number and name, in a grid or a list), Clear Selection and Prefix; on the right Select (All, Range, Include Bleed, Include Artboard Fill, Full Document), Export to, Open Location after Export, Create Sub-folders by Scale or by Format (on by default), Export PDFs As (Single File writes the chosen artboards as the pages of one PDF named after the document, `pdfs: "single"`), and the format rows with the iOS and Android buttons, the format presets (☰) and Format Settings; under them, how many items are selected and how many files the export writes. File name patterns, the Layers and Selection sources and per-item folders stay available through `document.exportForScreens` (scripts and MCP). Tests: `dialogs::tests_screens` (layout, iOS/Android, Clear Selection, sub-folders, Single File) and `fileio::tests_screens::single_file_pdfs_hold_every_chosen_artboard`.
- Export for Screens with Include Bleed: a PDF row's page keeps the artboard as its TrimBox and puts the bleed around it once as the BleedBox (a 100 pt artboard with a 9 pt document bleed gives a 100 pt TrimBox in a 118 pt BleedBox, in one file per artboard, a single file and the Full Document), so printer's marks line up with the artboard's edge. The bleed is the row's own (zero included, which a PDF/X row warns about), else the document's when the row sets none and its PDF preset gives none or a bleed of 0; raster, SVG and EPS rows still write the grown artboard. Tests: `fileio::tests_screens::include_bleed_pdf_pages_trim_at_the_artboard` and `include_bleed_pdfx_rows_do_not_warn_about_the_bleed`.
- Export for Screens refuses `pdfs: "single"` with `assets`, `layers` or `selection: "each"`, whose files each hold one item's art, instead of writing the first item alone as one PDF named after the document; `pdfs: "multiple"` writes a PDF of each item, and the selection as one file writes one PDF either way. The rule is VectorCraft's own. Tests: `fileio::tests_screens::single_file_pdfs_are_refused_for_assets_layers_and_each_object`.
- Save for Web: Preview in Browser writes each preview's page and images to a folder of its own inside `VectorCraft Save for Web` in the system's temporary folder. A later preview, from the same app or another one running, does not overwrite an earlier one. Each preview first removes the preview folders there that are an hour old or older and, on Linux, macOS and FreeBSD, belong to the current user; it leaves other files and folders alone. The folders a preview makes there are open to their owner only on those systems. When `VectorCraft Save for Web` is a link or is not a folder, or on those systems belongs to another user or can be written by other users, the preview goes to a new folder of its own in the temporary folder, which a later preview removes once it is an hour old (`file.saveForWeb.browser`).
- Save for Web: Optimize to File Size… opens rows for a desired file size in K, Start With (Current Settings, Auto Select GIF/JPEG) and, with slices, Use (Total of All Slices, Each Slice, Current Slice); OK takes the settings whose files fit and shows the size found, or says that no setting tried fits ([the help page](https://help.adobe.com/archive/en_US/illustrator/cs4/illustrator_cs4_help.pdf#page=395)). The search lowers JPEG quality or palette colors (GIF then lossy) and encodes at most 32 trial settings; Auto Select chooses GIF for transparent art or art of at most 256 colors and JPEG otherwise. The slices share one setting, so every Use choice changes all of them (`webExport.optimizeToFileSize`). Scores and estimates are unchanged.
- Save for Web: while Alt (Option on macOS) is held, the dialog's Cancel button reads Reset, which puts the remembered settings back on the document's active artboard and leaves the dialog open (`ui.dialogReset`).
- Export for Screens, Save for Web (slice images, and files named after the document's title) and the Libraries panel name files with the characters Windows does not allow written as `-` and with a `-` after a Windows device name such as `CON`, on every platform (`document.exportForScreens`, `document.exportForWeb`, `library.create`).
- Variables (data merge): text, visibility and image variables bound to objects (an object may carry several), dataset rows applied in one undo step (`variable.*`, `dataset.*`) from a Variables panel and Window › Variables, with dialogs to define, bind and edit, Make Text/Visibility/Image Dynamic, Capture/Update Data Set, CSV import/export (`dataset.import` / `dataset.export`), and a row in italics when an edit leaves the art not matching it; an image dataset value is a file path and apply keeps the object's bounds; bindings let go of deleted art and locked art is left alone except by visibility values; every command, like the rest, is drivable over MCP and the CLI.
- Export for Screens numbers distinct row files whose names collide, compared without case, as `-2`, `-3`… instead of leaving them out; identical rows still write one file. It puts row folders that differ only in case into one folder (`document.exportForScreens`).
@@ -873,8 +908,10 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- Graphs: the Graph Data window's Import Data reads a UTF-16 text file without a byte-order mark by the same rule as Import Data Sets…, instead of filling the cells with NUL characters. It reads a file cut short by one byte, or with an unpaired surrogate, as it reads one after a byte-order mark.
- Graphs: in the Graph Data window, the pointer becomes a column-resize arrow over a column's right edge, and dragging the edge sets that column's width in whole digits, from 0 to 20 as Cell Style's Column Width allows. The columns after it move along. Cell Style's Column Width still sets every column, the dragged ones included ([Adjust decimal digits and column width](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/adjust-column-width.html)).
- Variables: Import Data Sets… (`dataset.import`) defines the variables a file's header names that the document lacks, unbound. `#Shown` defines a visibility variable, `@Photo` defines an image variable, and a header without a prefix defines a text variable. A header that is a variable's exact name keeps naming it, and any other `%` header (graph data files) is refused.
- Variables: Import Data Sets… (`dataset.import`) reads `%` columns instead of refusing them: `%Sales` defines or names the graph variable `Sales`, and each cell is the path of a graph data file, read as the Graph Data window's Import Data reads one and kept as the data set's graph value. A relative path is taken from the CSV file's folder, or from `base`. A missing, unreadable or larger than 1 MB file fails the import with its line and column, and the document is left as it was (`crates/engine/src/tests/variables.rs`).
- Variables: Load Variable Library… in the Variables panel menu (`variable.loadLibrary`) replaces the document's variables and data sets with a variable library's, read from its XML file, in one undo step: every data set is deleted, and every variable is deleted with its bindings and values, except a variable the library also declares with the same kind, which stays bound so the library's data sets change its objects (#4136); then the library's other variables are defined, unbound: text, visibility, image (linked file) and graph variables, and variables without a known `trait` as unknown. Its data sets take text values from each value's `p` elements, one paragraph each, visibility values from `true` or `false`, image values from a file's absolute path or `file:` URL, and graph values from a `data` element of series names and rows.
- Variables: Save Variable Library… in the Variables panel menu (`variable.saveLibrary`) writes the document's variables of every kind and its data sets as a variable library's XML file, which Load Variable Library reads back with the same variables, kinds, data set names and values.
- Variables: opening an SVG whose variable data holds variables that aren't text warns about them by kind (Visibility, Linked File, Graph Data, or Unknown for a variable without a `trait`) with a count for each, and the status bar shows those kinds and the list in the interface language. Any other `trait` stays as the file writes it, in backticks, so a `trait` such as `Visibility` or one with a comma stays a single entry. This is VectorCraft's own rule. Regression tests: `svg_variable_data_warning_names_each_kind_left_out` in `crates/engine/src/tests/variables.rs`, `svg_variable_kinds_left_out_translate_in_every_complete_catalog` in `crates/ui-egui/src/i18n/tests.rs`.
- Variables: Variable Options… in the Variables panel menu, or a double click on a variable, shows the variable's name and kind, and OK changes either or both in one undo step (`variable.rename {name, newName?, kind?}`), as the [Work with variables](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/work-with-variables.html) page describes. VectorCraft's own rule for a kind change: objects that can't hold the new kind are unbound, and the variable's values in every data set are dropped.
- Variables: Import… in the Variables panel menu (`variable.import`) opens one file dialog for a data source and reads it by its extension: a CSV, TSV or TXT file as Import Data Sets… reads it, and an XML file as Load Variable Library… reads it. Other extensions are refused.
- JSON-lines control channel with real egui pointer and keyboard injection.
@@ -895,7 +932,8 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- Scripts: `$.fileName` is a read-only name of the script file in use ([the help page](https://extendscript.docsforadobe.dev/extendscript-tools-features/dollar-object/)). VectorCraft's own rules: it names the file of the code that reads it, so a function a file included with `#include` or run with `$.evalFile` defined, or one an earlier run of a named engine kept, gives its own file and not the calling file; code from a script given as `source`, and kept code whose place the engine dropped, gives an empty name, and code that `eval` or `Function` compiled gives the file being run. `crates/engine/src/tests/script_include.rs`, `crates/engine/src/tests/script_engines.rs`.
- Scripts: a runtime error is shown at the line that was running ([the help page](https://extendscript.docsforadobe.dev/extendscript-toolkit/debugging-in-the-toolkit/)). VectorCraft's own rules: an error in code an earlier run of a named engine compiled, such as a function it defined, is reported at that code's file, line and column (the earlier run's script, a file it included or a file its `$.evalFile` ran), while the report and its console line keep the calling run's name; a script given as text is named by its run's name, and each engine keeps these places for 8 MiB of source maps, the oldest going first. An error in code whose place is gone, or in code that `eval` or `Function` compiled, is reported without a line and column, and the code still runs. `crates/engine/src/tests/script_engines.rs`.
- Scripts: `$.line` is the line of the running script, counting from 1, and `$.stack` is the current stack trace ([the help page](https://extendscript.docsforadobe.dev/extendscript-tools-features/dollar-object/)). VectorCraft's own rules: both count lines in the file the code is in (the script, a file it included, a file `$.evalFile` ran, or the file of an earlier run of the named engine), and `$.stack` writes each frame as `name@file:line`, outermost first; code that `eval` or `Function` compiled keeps its own line in `[eval]`, and code whose place the engine no longer keeps is at line 0 of `[unknown]`. `crates/engine/src/tests/script_include.rs`, `crates/engine/src/tests/script_engines.rs`, `crates/js/src/extension_tests.rs`.
- Scripts: `File` and `Folder` ([File object](https://extendscript.docsforadobe.dev/file-system-access/file-object/), [Folder object](https://extendscript.docsforadobe.dev/file-system-access/folder-object/)) name files and folders by platform or URI path, with `name`, `fsName`, `absoluteURI`, `relativeURI`, `parent`, `Folder.current` and `encode`/`decode`, and read them: `exists`, `length`, the dates, `getFiles` with a mask or a function, and `open('r')` with `read`, `readln`, `readch`, `seek`, `tell` and `close`, decoding by byte order mark, `encoding`, UTF-8 or CP1252. VectorCraft's own rules: a script reads only in its own folder and below (and inside the automation read roots when they are set); any other path and a network or device path are refused before anything is looked up, and a link that leads out is refused as well (`false` or `null`, with `error` set); a file is read whole up to 8 MiB and a run reads up to 32 MiB; writing, the file dialogs and `execute` are not available yet. `crates/engine/src/tests/script_io.rs`.
- Scripts: `File` and `Folder` ([File object](https://extendscript.docsforadobe.dev/file-system-access/file-object/), [Folder object](https://extendscript.docsforadobe.dev/file-system-access/folder-object/)) name files and folders by platform or URI path, with `name`, `fsName`, `absoluteURI`, `relativeURI`, `parent`, `Folder.current` and `encode`/`decode`, and read them: `exists`, `length`, the dates, `getFiles` with a mask or a function, and `open('r')` with `read`, `readln`, `readch`, `seek`, `tell` and `close`, decoding by byte order mark, `encoding`, UTF-8 or CP1252. VectorCraft's own rules: a script reads only in its own folder and below (and inside the automation read roots when they are set); any other path and a network or device path are refused before anything is looked up, and a link that leads out is refused as well (`false` or `null`, with `error` set); a file is read whole up to 8 MiB and a run reads up to 32 MiB; `execute` is not available. `crates/engine/src/tests/script_io.rs`.
- Scripts: `File` and `Folder` write ([File object](https://extendscript.docsforadobe.dev/file-system-access/file-object/), [Folder object](https://extendscript.docsforadobe.dev/file-system-access/folder-object/)): `open('w')`, `open('e')` and `open('a')` with `write` and `writeln` by `lineFeed`, `copy`, `remove` (a folder only when empty), `rename`, `folder.create()`, the `length` and `readonly` setters, and `File.openDialog`, `File.saveDialog`, `Folder.selectDialog`, `openDlg`, `saveDlg` and `selectDlg`, with a `filter` of file types or a filter function and `multiSelect`. VectorCraft's own rules: a script writes only in `Folder.temp` (one for the run, deleted when it ends), its own `Folder.userData` next to the settings, and what a person allowed it in a file dialog, once or always; Always keeps the grant for that script file with that text by its SHA-256 and for the sources the run evaluated (`$.evalFile`, `eval`, `Function`), so a run that evaluates other code, or whose named engine holds other code, loses it first; `script.grants` lists the grants and `script.grants.revoke` removes them; the settings folder is kept out of every grant; the commands a script runs with `vc.run` read and write only in the same places and the open documents' own files; a run with nobody to ask gets `null` from the dialogs; a file is written at close or when the run ends, 8 MiB a file and 32 MiB a run, and named in `written`, also after a run that failed. `crates/engine/src/tests/script_io.rs`.
- Scripts: `#strict on` (and `//@strict on`) runs the script with the checks the [`$` object](https://extendscript.docsforadobe.dev/extendscript-tools-features/dollar-object/) help page gives for `$.strict`: an assignment to a read-only property throws a `TypeError`, and so does a new property on an object that takes none. VectorCraft's own rules: a getter-only property counts as read-only, the objects that take no new properties are the non-extensible ones (`Object.preventExtensions`, `seal`, `freeze`, and the frozen `vc` and `$` objects), the last `#strict` line of the script and its includes sets the whole run, a file `$.evalFile` runs keeps its own line's checks for its code, and the rest of ES5 strict mode stays with `'use strict'`. Without the line, runs are unchanged. `crates/engine/src/tests/script_include.rs` (`strict_on_*`, `strict_mode_in_eval_file_is_scoped`), `crates/js/src/interp_tests.rs` (`strict_writes_are_separate_from_es5_strict`).
- Scripts folder: File › Scripts lists the `.js` and `.jsx` files of the `Scripts` folder next to the preferences, each named after its file without the extension, with each subfolder as a submenu, above Check Script… and Other Script… (https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/install-and-run-scripts.html). VectorCraft's own rules: the folder is read again when the window becomes active and when the File menu opens (in the macOS menu bar, when any of its menus opens, and the new listing shows the next time the menu opens), links are not followed, and one read stops at 2,048 entries, 512 scripts, 128 subfolders, 4 levels or 250 ms. `script.listInstalled` returns the listing. `crates/engine/src/tests/script_folder.rs`, `crates/ui-egui/src/tests/scripts_menu.rs`.
- Open Recent Files under `--automation-read-root`: the control channel's `ui.menu.list` and `file.recentFiles` leave out the recent files outside the read roots, the other rows keep their ids, and `file.openRecentN` for one outside them answers `no such recent file`, as an empty slot does. `crates/ui-egui/src/tests/automation.rs`.
@@ -909,6 +947,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- Linked images in SVG output under `--automation-read-root`: the same outputs, and `clipboard.exportSvg`, refuse an SVG or SVGZ that would name a linked image's file outside the read roots (`images: link`, an image whose pixels the document doesn't hold, or `preserveEditing`), before any file or folder is written, with an error that names no file or folder; Copy in a frame a request drives then puts no SVG on the system clipboard. Embedded pixels, a file inside the roots, a relative path that leads inside them and a URL are written as before, and the person at the keyboard exports every link as stored. The check covers the art drawn for placed documents and leaves out what the file leaves out: hidden art in symbols, patterns and graph designs, opacity masks in SVG Tiny 1.2, and objects drawn as images for effects SVG has no filter for. `crates/engine/src/tests/links.rs` (`confined_svg_output_refuses_a_linked_image_file_outside_the_read_roots`, `svg_output_names_linked_image_files_a_caller_may_read`, `confined_clipboard_svg_refuses_a_linked_image_file_outside_the_read_roots`, `confined_preserve_editing_svg_refuses_a_brush_library_entry_it_cannot_read`, `confined_svg_output_checks_only_the_linked_images_it_writes`, `confined_svg_output_writes_a_colorized_gray_image_without_its_file`, `confined_svg_output_checks_the_images_of_placed_documents`, `confined_svg_output_leaves_hidden_symbol_art_unchecked`, `confined_svg_tiny_output_leaves_opacity_mask_images_unchecked`, `confined_svg_output_checks_the_images_drawn_for_pixel_effects`), `crates/ui-egui/src/tests/automation.rs` (`control_svg_export_refuses_a_linked_image_file_outside_the_read_root`), `crates/ui-egui/src/dialogs/svg_options.rs` (`show_code_leaves_out_a_linked_image_file_outside_the_read_roots`).
- Clipboard flavors under `--automation-read-root`: `clipboard.flavours` leaves out the SVG, and its markup as text, that `clipboard.exportSvg` refuses. `crates/engine/src/tests/links.rs` (`confined_clipboard_flavours_leave_out_a_withheld_svg`).
- Preserve Editing SVG under `--automation-read-root`: the native document an SVG or SVGZ carries leaves out an Export for Screens folder outside the read roots, and keeps the other export settings and the art; the open document keeps the folder, and a folder inside the roots is kept. `crates/engine/src/tests/links.rs` (`confined_preserve_editing_svg_leaves_out_an_export_folder_outside_the_read_roots`).
- Native document output and linked images under `--automation-read-root`: the outputs that carry the native document (a native file or template, an EPS file, a `.ai` or `.ait` file of every artboard, a PDF of every artboard with Preserve Editing, also from `document.exportPdf`, the saves and Export for Screens rows) are refused, before any file or folder is written, with an error that names no file or folder, when that document names a linked image or placed file, a kept relative path or a data set's image outside the read roots, or holds a stored brush entry that does not read as a brush; files without the native document are written. Those documents, and the documents Package writes or rewrites, leave out an Export for Screens folder outside the read roots, and Package refuses a linked file it copies as it is whose native document keeps one; the open document keeps its links, data sets and folder. An Export for Screens row that writes one artboard is checked against that artboard's art, and each asset, layer or selected object writes its own native, `.ai` or EPS file. `crates/engine/src/tests/links.rs` (`confined_native_output_refuses_a_linked_image_file_outside_the_read_roots`, `confined_native_output_refuses_a_data_set_image_outside_the_read_roots`, `confined_native_output_leaves_out_an_export_folder_outside_the_read_roots`, `confined_screens_rows_check_the_artboard_each_file_holds`), `crates/engine/src/tests/package.rs` (`a_confined_package_refuses_a_linked_file_that_keeps_an_export_folder_outside_the_read_root`), `crates/engine/src/cmd/fileio/tests_screens.rs` (`each_piece_writes_its_own_native_document`).
- Linked-file and font-file searches under `--automation-read-root`: `links.findFiles` and `text.findFontFiles` replies, also later polls and stops of a search another client started, leave out the files found, a link's saved path and the folder searched outside the caller's read roots, and a failed search gives its reason without the path; `image.info` gives `link: null` for a linked file outside them; `text.addFontFiles` gives `folder: null` and the copies' file names when the Fonts folder is outside them. `crates/engine/src/tests/linkfiles.rs`, `crates/engine/src/tests/fontfiles.rs`, `crates/engine/tests/font_folder.rs`.
- Swatch, brush, symbol and graphic style library lists under `--automation-read-root`: every library stays listed, the paths of library files and the user library folder outside the read roots are `null`, a library loaded from outside them is listed and found as `loaded/<file name>` and keeps that id for the session unless a library loaded later without a file shows that id itself, which moves it to the next free `loaded/<file name> (N)`, and the app's own list is not changed. `crates/engine/src/tests/library_roots.rs`.
- Preferences commands under `--automation-read-root`: `prefs.get`, `prefs.list`, `prefs.set` and `prefs.reset` show folder preferences outside the read roots as `null` and leave out an export preset's folder outside them, and the preferences are not changed. `crates/engine/src/tests/prefs_roots.rs`.
@@ -959,6 +998,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- Screen readers get the value of the color and channel sliders that panels and dialogs draw (the Color panel, the Color Picker, Swatch Options, the Navigator's Zoom, the Character panel's variable font axes, the Perspective Grid and flattener options, and the sliders of the effect, tool option and transform dialogs): the number and text of the field beside each one, such as 128 for G or 50% for an opacity, with the slider's range, which extends to include a number past the slider's end. The harmony wheel's Brightness slider, which has no field, reports its brightness in percent.
- A layer whose Layer Options › Print is off shows its name italic in the Layers panel, and while its row is dragged, as the reference application shows non-printing layers (#5739); a printing layer stays upright and ticking Print again restores the upright name (`panels::layers` test `a_layer_that_does_not_print_has_its_name_italic`).
- In the Layers panel only the primary mouse button drags. A drag with the right or middle button on a row, a guide row, the selection square, the eye or lock column or a target circle moves, copies, hides, locks and transfers nothing and records no undo step, and a right-click still opens the row's menu (`panels::layers` test `only_the_primary_button_drags_rows_guides_art_columns_and_appearances`).
- Rows or the selection square dragged over the Layers panel's list show the copy cursor while Alt is held, as the drop then copies, and the grabbing hand otherwise; the cursor follows Alt pressed or released mid-drag. The copy cursor is the panels' add cursor (#8241): on Windows and X11, which have no system copy cursor winit can show, the white arrow with a plus. Over the trash and New Layer, which delete or duplicate with or without Alt, the hand stays, and guide rows keep their own cursor (#8217; `panels::layers` tests `alt_shows_the_copy_cursor_while_rows_are_dragged` and `drag_cursor_shows_a_copy_only_where_the_drop_copies`).
- Rows dragged in the Layers panel and held within 28 points of the list's top or bottom edge scroll a long list that way, faster nearer the edge (60 points a second at the band's inner side, 340 at the edge, at every frame rate), and keep scrolling while the pointer stays still, so a row out of view can take the drop (a move, or a copy with Alt); the Libraries panel's list scrolls by the same rule. In a list view shorter than 56 points each band is half the view, so a pointer in the top half scrolls up, one in the bottom half scrolls down, and a pointer just outside the view does not scroll it toward the far edge. A pointer beside the list, a drag of the eye or lock column and a release stop the scrolling, and scrolling changes nothing in the document. The band and speeds are VectorCraft's own (`panels::layers` tests `rows_held_near_the_bottom_or_top_edge_scroll_the_list_to_a_row_out_of_view`, `a_held_row_scrolls_the_list_as_far_in_the_same_time_at_any_frame_rate` and `the_list_scrolls_only_for_rows_held_over_it`; `panels` test `drag_scrolling_in_a_short_list_goes_toward_the_nearer_edge`).
- The other panels' item drags start only with the primary mouse button too: swatches and color groups, brushes, symbols, graphic styles, library items and groups, character and paragraph styles, Appearance rows and its thumbnail, the Fill and Stroke squares, Recent Colors and the Gradient panel's thumbnail. A right or middle drag on one carries nothing, moves, copies, deletes and applies nothing and records no undo step; right-click menus and the Graphic Styles panel's held right-button preview stay as they were (`panels::swatches` test `only_a_primary_drag_moves_swatches_and_groups`, `panels::text_styles` test `only_a_primary_drag_carries_a_style_row`, `panels::tests_symbol_libraries` test `only_a_primary_drag_carries_a_library_symbol_out`, `panels::tests_effectedit` test `only_a_primary_drag_carries_the_thumbnail_or_a_row`).
- Panels undock (#495): a dock tab, a panel icon or a popped-out panel's title dragged out of the dock floats that panel (in an OS window of its own on the desktop, #4135), and the strip right of the dock's tabs floats the whole tabbed group. A floating group moves by its title bar, a tab dragged out of it floats on its own, and dropped on another group's title bar or tabs it stacks with that group; dropped on a dock group's tabs, which light up under the pointer, its panels join that group, and on the group's upper or lower half they make a new group above or below it (`window.panel.dock {anchor, zone}`); dropped on the icon column they become icons there, the tabbed group's panels too (`window.panel.dock {icon: true}`); dropped anywhere else on the dock, which lights up, they go back where they live (the tabbed group or the icon column), as its × and the panel menus' Float Panel / Dock Panel do (`window.panel.float`, `window.panel.dock`). The Tools panel floats by its title bar and docks again on the window's left edge. Floating groups stack into sets: dropped on the upper or lower half of another group (a line shows where), a group joins it right above or below it, and the set's groups stack top to bottom, each showing one panel, moving together by the top group's title bar, whose × docks them all; a group dragged by its tab strip leaves the set (`window.panel.float {below, above}`). A double-click on a tab collapses a floating group to its tabs (`collapsed`), and a dock group too, a group below it moving up into the room; a second double-click, or a click on another of its tabs, expands it (`window.panel.collapse`, kept with the preferences and in saved workspaces). Sets dropped on the left edge of the icon column or of another dock column dock as dock columns (a multi-column dock, `window.panel.dock {column}`), whose groups stack, tab and tear out as a floating set's do, and whose top strip floats the column again. Floating panels, their sets and the Tools panel's position are kept with the preferences and in user workspaces, and clamped into a smaller window. Not done: panels in separate OS windows, reordering tabs by dragging, collapsing a set or dock column to icons, dock columns right of the default dock, resizing floating panels and the groups of a set.
@@ -971,12 +1011,13 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- Window › Toolbars › Manage Toolbars… and Manage Toolbars… in the All Tools drawer's menu open a dialog that lists the toolbars made with New Toolbar: a new name typed for the selected toolbar renames it, + copies it with its tools (with none selected, + makes a blank toolbar), and the trash can deletes it. Each change shows under Window › Toolbars and stays in the workspace (<https://helpx.adobe.com/illustrator/using/tools.html>; `window.toolbar.manage`, `window.toolbar.rename`, `window.toolbar.duplicate`, `window.toolbar.delete`; `manage_toolbars_renames_duplicates_and_deletes`).
- A toolbar made with New Toolbar docks in a lane along the window's left or right edge when its title bar is dropped on that edge, or with Dock to Left and Dock to Right in the title bar's context menu. Toolbars docked at one edge stack from the top, each with its share of the lane's height, and the lane is as wide as its widest toolbar; a lane too short for its stack wraps it into more columns, up to half the window's width, and past that the toolbars show only their title bars, which the mouse wheel scrolls through when even they do not fit. Dragging the title bar out of the lane, or Float Toolbar, floats it again, and Escape during the drag puts it back. Hiding and renaming keep its place, and the workspace keeps it. New toolbars still start floating. The lanes and the stacking are VectorCraft's own rules (#1759; `window.toolbar.dock`, `window.toolbar.float`; `toolbars_dock_and_float_by_their_commands`, `docked_toolbars_stack_in_lanes_along_the_window_edges`, `a_title_bar_dropped_on_an_edge_docks_the_toolbar`).
- The status bar shows the errors of the toolbars made with New Toolbar (a missing, empty, too long or taken name, the 64-toolbar limit, a `side` or `order` that `window.toolbar.dock` does not take, and New Toolbar's dialog and Manage Toolbars) in every language that translates every message, with the toolbar's name, the parameter key and the value given kept as they are; the error the command returns stays English (`custom_toolbar_command_errors_are_translated`).
- Window › Toolbars › Keep Tools Beside the Canvas, a VectorCraft layout option that is off by default, docks the Tools panel between left-side panels and the canvas instead of at the window's left edge; the canvas's left edge then also docks a floating Tools panel, and workspaces keep the setting. Scores are unchanged (`window.toolsBesideCanvas`; `docked_tools_keep_the_window_edge_unless_kept_beside_the_canvas`, `tools_redock_at_the_targets_of_the_chosen_placement`).
- Window › Toolbars › Keep Tools Beside the Canvas, a VectorCraft layout option that is off by default, docks the Tools panel between left-side panels and the canvas instead of at the window's left edge, and workspaces keep the setting. A floating Tools panel dropped on the canvas's left edge, right of panels docked on the left, docks there and turns the setting on, and one dropped on the window's left edge docks there and turns it off; with no panels docked on the left, a drop leaves the setting as it is (#7837). Scores are unchanged (`window.toolsBesideCanvas`; `docked_tools_keep_the_window_edge_unless_kept_beside_the_canvas`, `tools_dropped_on_a_left_edge_dock_there_and_the_setting_follows`, `tools_dropped_where_the_left_edges_overlap_keep_the_setting`, `tools_dropped_beside_a_collapsed_left_dock_follow_the_strip_dropped_on`).
- Hindi (2026-11-06): Hindi (`hi`): 7,877-row machine-assisted catalog, zero/one singular plurals, desktop font fallback and optional Devanagari craft-fonts fallback; all 55 translation tests pass; native review and a web font remain; scores and estimates unchanged. [Terminology and limitations](localization-hi.md).
- Gujarati (2026-11-14, #6613): `gu` has 4,673 catalog rows, zero/one singular plurals, installed desktop font fallback and support for optional `Gujr` craft-font faces. The original 4,286 rows remain unchanged; all 387 additions are contributor-reviewed and approved, with 11 wording corrections. Status/error messages remain partial; the pinned fonts and web startup list have no Gujarati face, so web selection remains unavailable until one is bundled. Current-head validation is recorded in the PR; scores and estimates unchanged.
- Hindi wording (2026-11-13): rows outside the plug-in messages keep their English's meaning, quantities and clauses, and use the catalog's save, swatch, crop, resolution, path and type terms; a test checks those terms and the point unit in every row; native review remains; scores and estimates unchanged.
- Hindi word senses (2026-11-13): 85 labels and messages use the interface sense of their English: Desired is वांछित and the range message keeps both comparisons, rulers are रूलर, text characters कैरेक्टर, vector points पॉइंट, fills फ़िल्स and High Contrast उच्च कंट्रास्ट; the glossary test rejects the unrelated senses in every row; native review remains; scores and estimates unchanged.
- Hindi terms (2026-11-13): every row that names a variable (data merge, variable fonts and widths, environment variables) says वेरिएबल, and joining paths, anchor points, point type and lines says जोड़ें instead of शामिल हों, which stays for joining the community; a test checks both terms in every row; scores and estimates unchanged.
- Greek knockout term (2026-11-15): Page Knockout Group and Opacity & Mask Define Knockout Shape say διάτρηση, as Knockout Group does, instead of αποκοπή, which stays for clipping and cutting; a test checks the term in every row that names a knockout; scores and estimates unchanged.
- Hindi messages its catalog lacked (2026-11-14): 116 status and error messages that the Hindi catalog did not translate, among them the image export, color profile, swatch exchange, color book, DXF, PDF knockout group, Revolve and 3D messages, have Hindi rows; the translations are VectorCraft's own and await native review; scores and estimates unchanged.
- Hindi English words (2026-11-13): 264 rows no longer keep English words in their sentences, repeat a parameter's name in Hindi or garble them, among them "unknown align", which now names the alignment; lists of accepted values such as `(left|right|top|bottom)` stay as their English writes them; two tests check every row; native review remains; scores and estimates unchanged.
- Message field names and values (2026-11-13): 49 status and error messages in the Hindi, Bulgarian, Danish, Indonesian, Dutch, Brazilian Portuguese, Swedish and Turkish catalogs keep the field names in brackets, such as `[subpath, anchor]`, and the values an `unknown` message lists, such as `(points, lines)`, as their English writes them; a test checks every catalog; scores and estimates unchanged.
@@ -988,10 +1029,12 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- The History panel, Edit › Undo and Edit › Redo translate the names of the steps that apply or redefine a character or paragraph style and of the step that redefines a graphic style: each such step keeps its template (`Apply {name}`, `Redefine {name}`, `Redefine Graphic Style “{name}”`) and the style's name, every complete catalog has a row for each template, and the panel and the menu show the style's name as the document holds it, except the Normal styles' names, which they show in the interface language (`steps_named_after_a_style_list_the_template_around_the_name`, `undo_and_redo_name_a_style_step_around_the_style_name`).
- The Polish catalog (`crates/ui-egui/src/i18n/pl.tsv`) has an `@msg` row for the status and error messages the untranslated report (`untranslated_report`) finds in the sources, 3,439 `@msg` rows in all: the errors of commands, scripts, file import and export and plug-ins. The report lists 46 Polish messages: 44 that open #7211, #7214, #7116, #7330 and #1931 translate, and 2 that no language has a row for. A message with two placeholders in a row (`Template::parse` in `crates/ui-egui/src/i18n/catalog.rs`) is still shown in English.
- The status bar translates the limits a plug-in run can exceed (its instruction, time and memory budgets and its output size) and the error of a plug-in removal that leaves the plug-in's grant in the plug-in store, in every language that translates every message. The untranslated-strings report also lists messages that an error or a status takes from a `&str` constant (`plugin_limit_errors_are_translated`, `message_scan_reads_messages_held_in_constants`).
- The untranslated-strings report reads a message written over two lines with a `\` at the end of the first as one line, the text the program shows, and the Georgian catalog's (`ka`) row for PDF export's warning about knockout groups with too many translucent elements matches that text (`message_scan_joins_a_literal_continued_on_the_next_line`, `untranslated_report`).
- The status bar translates the plug-in host's other errors (manifest, module and run checks, the output an importer, exporter or effect returns, and the approval a plug-in's permissions need) in every language that translates every message. A JSON object or array inside a message stays as written, and a message that wraps another one, such as `plug-in manifest: {0}`, is matched by its own row before a row that starts with a placeholder. The reasons inside these errors (what is wrong with a parameter's spec or dialog keys, the value a parameter needs, what is wrong with an object, stroke, paint or effect in a plug-in's output) are translated with them, and the untranslated-strings report lists the reasons the plug-in host's error helpers take (`plugin_messages_are_translated_in_every_complete_catalog`, `plugin_errors_translate_with_their_values`, `plugin_error_reasons_are_translated_with_the_error`, `message_scan_reads_plugin_helpers`, `templates_that_start_with_text_match_first`).
- The status bar translates `script.run`'s refusals of `answers` in every language that translates every message: a value that is not a list, more than 10,000 answers, more than 1 MiB, an answer at an index that is not an object, does not have exactly `kind` and `value`, has a `value` its kind of dialog does not take, holds a prompt's text longer than 16 KiB or has an unknown `kind`, and `answers` given to a run in the app. The index, the counts and the code names are shown as they are, and the command's error stays in English. The untranslated-strings report also lists the refusals of `script.run`'s parameters (`script_answers_errors_are_translated`, `message_scan_reads_script_run_param_refusals`).
- The Japanese catalog (`crates/ui-egui/src/i18n/ja.tsv`) has 3,562 `@msg` rows and 49 `@msgplural` rows (counted 2026-11-14). The untranslated report (`untranslated_report`) lists 98 status and error messages in the sources that have no Japanese row: 77 that every complete-message language lacks, and 21 more. Open #7211 translates 34 of them, among them the composite font errors, and open #7116 translates the justification order error. The status bar does not use the rows for ``unknown parameter `{within}{key}`; {why}`` and `{name} must be {lo}–{hi}{unit} (got {v})`, because a message with two placeholders in a row cannot be matched (`Template::parse` in `crates/ui-egui/src/i18n/catalog.rs`). The row for `{k} has control characters{_1}` does not match the File Info error for a multi-line field, where the last placeholder is empty. A native speaker has not reviewed the wording.
- A status or error message whose braces are literal, such as a plug-in's `expected {"objects": [...]}` or a command's `quotes must be {double?, single?}`, is translated only when the whole message matches its row: the row writes those braces doubled and has no placeholder, so it no longer replaces a different message that starts with the same words, such as a JSON reason `expected value at line 1 column 1`, which stays in English. A row without placeholders is found at any message length (`plain_message_keys_double_their_braces`, `literal_brace_rows_match_only_their_message`).
- Every complete-message catalog translates five more messages with literal braces through such a row: the composite font errors `each font must be {name, parts}` and `give fonts: [{name, parts}…]`, `select.font`'s `` `scope` must be "document", {artboards: [index, …]} or {layers: [id, …]} ``, the script regular expression error `numbers out of order in {} quantifier` and `the paint is not a freeform gradient (apply one with paint.editGradient {kind: "freeform"})`. Each translation keeps the braced example as written, and no catalog keeps the older rows with a placeholder in place of the braces, which also translated other text with the same start and end (`literal_brace_messages_have_exact_rows_in_complete_languages`).
- The status bar translates the errors a script's `File` and `Folder` objects, `vc.run`, `$.evalFile`, the `$` object's properties and functions, `alert`, `confirm` and `prompt`, `vc.document` and `vc.log` raise, the limits a run can pass, and the errors of Drop Script Engine, and the line for a run that fails (a syntax error, a thrown error, a limit, a stop or an internal error, with the script's name, the line and column, the included file it is in and the files left written), in every language that translates every message. The script's name, paths, numbers, command ids and the text a script throws itself are shown as they are. A failure with no line and column, such as an error in code `eval` compiled, is shown with one colon after the script's name (`an_error_without_a_place_names_the_script_and_kind`). A message template that names a value twice matches only when both places hold the same text, so the line for a failed run is not taken for the message inside it (`a_repeated_placeholder_matches_the_same_text`). The untranslated-strings report also lists the messages the script host's `fail`, `value` and `over` helpers take and the errors the script interpreter throws, and a constant's text comes from the file or crate that declares it, so the Scripts menu's headers are not listed as messages (`script_errors_are_translated`, `script_host_errors_are_translated`, `message_scan_reads_script_interpreter_errors`, `message_scan_reads_constants_of_the_file_and_its_crate`, `message_scan_skips_test_modules_with_any_test_cfg`).
- The status bar also translates the errors the script interpreter's core throws (an unknown name, a property of `null` or `undefined`, a property that cannot be defined, assigned or deleted and the reason, a value that is not a function or a constructor, an invalid array length, an invalid assignment target), on their own and in the line for a failed run, in every language that translates every message. Names, property names (a value a message quotes in `'…'` is shown as written, like one in `"…"`, even when it matches a translated message), `null`, `undefined`, `in`, `instanceof` and the error's type (`TypeError`, `ReferenceError` and the others) are shown as they are, and a script that catches the error still reads its English message. An error about a property of `null` or `undefined` names a computed property whose name is not an object and is at most 256 units long, and otherwise says only that the script read or set a property, instead of naming an empty property (`script_interpreter_core_errors_are_translated`, `errors_about_null_and_undefined_name_the_property`, `message_scan_reads_script_interpreter_errors`).
- The Turkish catalog (`crates/ui-egui/src/i18n/tr.tsv`) has an `@msg` row for all but 41 of the status and error messages the untranslated report (`untranslated_report`) finds in the sources, 3,446 `@msg` rows in all. The row for `{k} has control characters{_1}` does not match the File Info error for a multi-line field, where the last placeholder is empty. A native speaker has not reviewed the wording.
@@ -1019,28 +1062,36 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- The Transform panel menu's Transform Object Only, Transform Pattern Only and Transform Both (`transformPanelPatterns`) choose whether the fields, flips and menu flips of the Transform panel and the Properties panel's Transform section move the object and leave its pattern tiles, move the tiles alone, or both (until a choice they follow General › Transform Pattern Tiles, as before); Use Registration Point for Symbol (`useRegistrationPointForSymbol`) measures and transforms one selected symbol instance from its symbol's registration point, where the instance's flips, rotations and shears put it ([Transform panel overview](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/transform-panel-overview.html); `panels::transform::tests::the_menu_chooses_whether_the_object_its_pattern_or_both_transform`, `use_registration_point_for_symbol_measures_an_instance_from_its_registration_point`, `use_registration_point_for_symbol_follows_a_transformed_instance`, `tests_prefs::transform_panel_patterns_defaults_to_following_the_general_preference`).
- The Transform panel's Align to Pixel Grid checkbox (`object.setPixelAligned`) gives paths and compound paths a pixel-aligned property, saved in the native file: their horizontal and vertical straight segments sit on whole points (half points under an odd centered stroke) with whole stroke weights, and every move, scale, rotation, reflection, Transform Each, Align move, Transform panel change, move of direct-selected anchors or of one anchor, move of a compound path's path on its own, artboard move, resize or copy that carries the art, Duplicate or paste that moves a copy, stroke edit and appearance edit that adds, removes, hides, repaints or reweighs a stroke snaps them again, while diagonal segments and curves keep their shape; a compound path made from an aligned path or compound path is aligned and snaps its paths with its own stroke; the box shows a dash for a mixed selection and is unavailable for type, images and groups ([Pixel-aligned property](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/pixel-preview-mode-for-web-graphics.html); `tests::pixelalign::turning_it_on_snaps_the_path_in_one_undo_step`, `it_stays_aligned_through_transforms`, `it_stays_aligned_when_its_artboard_moves`, `diagonal_segments_and_curves_keep_their_shape`, `type_and_images_cannot_be_aligned`, `the_property_is_saved_and_read_back`, `stroke_edits_keep_it_aligned`, `a_compound_path_of_aligned_paths_is_aligned`, `a_compound_path_of_an_aligned_compound_path_is_aligned`, `a_stroke_without_paint_snaps_to_whole_points`, `moving_direct_selected_anchors_keeps_it_aligned`, `moving_one_anchor_keeps_it_aligned`, `moving_a_path_of_an_aligned_compound_path_keeps_it_aligned`, `artboard_options_and_artboard_copies_keep_it_aligned`, `appearance_edits_keep_it_aligned`, `placed_gradients_follow_the_snapped_path`, `duplicates_and_pastes_keep_it_aligned`, `paths_added_to_or_moved_in_an_aligned_compound_path_keep_it_aligned`, `the_art_of_a_linked_opacity_mask_keeps_it_aligned`, `a_linked_opacity_mask_follows_a_snap`, `aligning_direct_selected_anchors_keeps_it_aligned`, `global_edit_keeps_its_members_aligned`, `a_path_with_live_corners_snaps_its_inner_edges`, `geometry_edits_keep_it_aligned`, `other_path_edits_keep_it_aligned`, `panels::transform::tests::align_to_pixel_grid_shows_and_sets_the_property`).
- Align New Objects to Pixel Grid (`document.setup {alignNewObjectsToPixelGrid}`, a checkbox in New Document's Advanced Options and a checked item in the Transform panel menu) gives every path and compound path drawn in the document, the paths of a new grid or flare included, the pixel-aligned property, snapped in the step that draws it; it is on in the Mobile and Web presets and off in the others, saved presets and Recent keep it, and the document saves it. Type, images and groups do not take it, and art already in the document, pasted, duplicated or placed keeps its own property (VectorCraft's own rules) ([Pixel-aligned property](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/pixel-preview-mode-for-web-graphics.html); `tests::pixelalign::align_new_objects_makes_new_paths_pixel_aligned`, `align_new_objects_reaches_grids_flares_and_add_on_shapes`, `align_new_objects_is_saved_and_read_back`, `tests::newdoc::align_new_objects_to_pixel_grid_follows_the_preset`, `panels::transform::tests::align_new_objects_menu_item_toggles_the_active_document`, `dialogs::new_document::tests::align_new_objects_checkbox_follows_the_preset_and_reaches_the_document`).
- The Transform panel works out its Align to Pixel Grid checkbox once for each document revision and reuses it on later frames, and lists the selected objects' ids only when the box is clicked. The box shows the same state. With Select All of 99,500 objects (100,000 paths, 1,000 of them in 500 compound paths), working the state out on every frame took a median 33.5 ms of thread CPU time per frame in a release build on a loaded machine; the first frame after a change now takes 31.5 ms and later frames take about 1 ns (`panels::transform::tests::align_to_pixel_grid_kept_state_equals_a_full_measure`, `align_to_pixel_grid_state_is_measured_once_per_revision`, `pixel_aligned_state_timing`).
- Break Link to Symbol and Object › Expand give a symbol instance's art the instance's own bounding box: after Reset Bounding Box the art stands square to the page, an object turned inside the symbol keeps its angle relative to the instance's box, a group added for the instance's opacity takes the instance's box, and the clip groups of 9-slice art take the angle of their cell. Compound shapes and Pathfinder receive an instance's art with the same angles (VectorCraft's own behavior; `bboxrotate::reset_bounding_box_then_expand_symbol_instance`, `reset_bounding_box_then_expand_keeps_the_angles_inside_the_symbol`, `expanding_a_faded_symbol_instance_gives_its_group_the_instance_box`, `expanding_a_reflected_symbol_instance_keeps_its_box`, `symbol_nine_slice::break_link_turns_the_cells_of_a_sliced_instance_with_its_box`, effects `outline_object_turns_an_instances_art_with_its_box`).
- Object › Transform › Reset Bounding Box squares the box of every object inside the selected ones as well: the children of groups, compound paths, clip groups, blends, envelopes, repeats and intertwines, and the art of linked opacity masks. Ungroup and the release commands then bring back boxes square to the page (VectorCraft's own behavior; `bboxrotate::reset_bounding_box_squares_the_objects_inside_a_group`, `reset_bounding_box_squares_the_turned_members_of_a_square_group`, `reset_bounding_box_then_release_clipping_mask` and the other `reset_bounding_box_then_*` tests, `reset_bounding_box_leaves_the_art_of_an_unlinked_opacity_mask`).
- Object › Transform › Rotate Bounding Box… turns the selection's bounding box by the angle typed in its dialog without moving the art (`object.rotateBoundingBox`, `absolute: true` to set the angle). Objects with different angles get one shared angle, and the objects inside a group and the art of a linked opacity mask turn with it. A path of a compound path selected on its own turns only its own box, and Reset Bounding Box squares only that path's box too (VectorCraft's own behavior; `bboxrotate::rotate_bounding_box_turns_the_box_and_leaves_the_art`, `rotate_bounding_box_back_to_zero_stores_zero`, `rotate_bounding_box_gives_a_mixed_selection_one_angle`, `rotate_bounding_box_turns_the_objects_inside_a_group_with_it`, `rotate_bounding_box_turns_a_linked_masks_art_only`, `reset_bounding_box_squares_every_box_rotate_bounding_box_turned`, `rotate_bounding_box_refuses_bad_params`, `tests::rotate_bounding_box_of_a_compound_paths_member_turns_only_that_path`, ui-egui `panels::transform::tests::rotate_bounding_box_menu_item_turns_the_box_by_the_dialog_angle`).
- After a rotation the Free Transform tool shows and drags the same turned bounding box as the Selection tool: its handles, their cursors and its rotate zone sit on the selection's own sides, a handle scales along those sides from the opposite handle ([the help page](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/scale-objects.html)), Cmd/Ctrl on a side handle shears along that side, and Perspective Distort and Free Distort start from the turned box's corners (`object.distort` takes `angle` with `from`) (`bboxrotate::free_transform_handles_turn_with_the_object_and_scale_along_its_axes`, `free_transform_shears_along_the_turned_side`, `free_transform_distort_starts_from_the_turned_box`, `xform::distort_reads_from_in_a_turned_frame_and_rejects_a_bad_angle`, tools `xform::free::tests::the_box_and_its_handles_turn_with_the_selection`).
- After a rotation the Scale and Reflect tools, the Scale and Reflect dialogs, `object.scale`, `object.reflect` with a named axis and the Transform and Properties panels' flips act along the selection's turned bounding box until Reset Bounding Box: the horizontal and vertical scale stretch along its own width and height, and the vertical and horizontal reflection axes are its own. The Reflect tool's default axis and its Shift steps start from the box's axes, and an axis drawn with the tool is the line drawn on the page. `basis: "page"` keeps the page's axes (VectorCraft's own rules; `bboxrotate::scale_and_reflect_follow_the_turned_box`, tools `xform::transform::tests::scale_and_reflect_drags_follow_a_turned_bounding_box`).
- Perspective Distort and Free Distort (`object.distort`) turn each warped object's bounding box as the warp turns the object at its own center, the objects inside groups, compound paths and clip groups and the art of linked opacity masks included, so the next Selection or Free Transform drag uses the tilted box; Object › Transform › Reset Bounding Box squares it again, and corners left where they are add no undo step (VectorCraft's own rule; `bboxrotate::distort_turns_an_upright_box_with_the_warp_at_its_center`, `distort_turns_each_member_and_linked_mask_by_its_own_warp`, `mirrored_and_collapsing_distorts_keep_valid_angles`, `distort_angles_undo_redo_and_reopen_together`, `xform::unchanged_distort_records_no_history`).
- The Free Transform widget's Constrain works in Free Distort as well as in Free Transform ([the help page](https://helpx.adobe.com/illustrator/using/tool-techniques/free-transform-tool.html)). With Constrain on, or Shift held, a corner dragged in Free Distort moves only along the line through the opposite corner, in the box's own proportions, and the other three corners stay in place; on a turned box the line runs through the box's own corners. The line is VectorCraft's own rule. Cmd/Ctrl+Alt+Shift on a corner still drags in Perspective Distort, where Constrain stays unavailable (tools `xform::free::tests::free_distort_corner_keeps_to_its_diagonal_with_shift_or_constrain`, `shift_pressed_during_a_free_distort_drag_constrains_it`, `a_turned_box_is_constrained_along_its_own_diagonal`, `along_diagonal_of_a_degenerate_box`; engine `xform::free_transform_constrained_distort_keeps_the_corner_on_its_diagonal`; ui-egui `free_transform::tests::the_widget_sets_the_mode_and_a_corner_drag_then_distorts`).
- Native macOS menu bar, vector tool cursors, a command palette (Help › Search Commands…), middle-button panning with any tool. Native menus explicitly end tracking on command selection, outside window presses and Escape; menu updates wait until tracking ends, and a dismissing press never starts a canvas gesture (M14.8).
- A Recent Commands button beside the Help › Search Commands field lists the last five commands and tools picked from the palette, most recent first, with a command picked again moved to the top. Choosing a row closes the palette and runs it as a pick of the same result does; with no picks yet the list shows a dimmed No recent commands row, and a command that is not available now, such as a filter of a plug-in that is not loaded, is left out until it comes back. The ids are saved with the UI state. While the list is open, Up and Down move through its rows, wrapping at the ends, and Escape closes the list before the palette. This is VectorCraft's own addition and does not raise a score (#6376; `palette` tests `recent_commands_*`, `a_recent_command_runs_what_its_pick_runs`, `the_keys_wrap_within_recent_commands`, `escape_closes_recent_commands_before_the_palette`).
- The Learn panel (Window › Learn, or Explore tutorials beside the search icon on the app bar) has a For you tab with a Get started section and a Quick skill guide card, and a Skills tab that lists VectorCraft's own skills with their progress rings and counts of tutorials finished; a skill lists its tutorials, a tutorial shows its numbered steps, and Back goes up a level; `learn.list`, `learn.tab {tab}`, `learn.skill {skill}`, `learn.show {tutorial}` and `learn.back` script it, and the tab buttons, the rows and Back run them ([the help page](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/learn-skills-quick-skill-guide.html); `panels::learn::tests`).
- Help › Search Commands… is the first item of the Help menu in the window, with its shortcut and a separator after it; in the native macOS menu bar it is the first item below the system's search field. This is VectorCraft's own order and does not raise a score (`menus::tests::help_starts_with_search_commands`, `tests::nativemenu::the_mac_help_menu_starts_with_search_commands`).
- A Recent Commands button beside the Help › Search Commands field lists the last five commands, tools, panels and effects picked from the palette, most recent first, with a command picked again moved to the top. Choosing a row closes the palette and runs it as a pick of the same result does; with no picks yet the list shows a dimmed No recent commands row, and a command that is not available now, such as a filter of a plug-in that is not loaded, is left out until it comes back. The ids are saved with the UI state. While the list is open, Up and Down move through its rows, wrapping at the ends, and Escape closes the list before the palette. This is VectorCraft's own addition and does not raise a score (#6376; `palette` tests `recent_commands_*`, `a_recent_command_runs_what_its_pick_runs`, `the_keys_wrap_within_recent_commands`, `escape_closes_recent_commands_before_the_palette`).
- The app bar's search control is a field showing a magnifier, "Search commands" and the Help › Search Commands… shortcut. The field shows no shortcut when the shortcut is cleared or too long to fit beside the text; the tooltip and the screen-reader name still give it. A click on the field, or Enter or Space while it has the keyboard focus, toggles the command palette as the shortcut does, and the palette's popup holds the text field. While the field has the focus, the app's existing rule for a focused control keeps the app's own keys off, so Enter does not open Move and Tab moves the focus on. While a dialog is open the field and the icon are drawn disabled and do nothing, as the shortcut does. Screen readers name the field and the icon Search commands, with the shortcut. As the bar narrows, the community button goes first, then Explore tutorials, then the field becomes the magnifier icon, then the workspace switcher narrows to 64 points, then the icon goes; Safe Mode's label keeps its room first. The field is wider than the icon, so the community button and Explore tutorials go at wider bars than they did beside the icon. This is VectorCraft's own addition and does not raise a score (`chrome::tests`: `the_app_bar_gives_up_its_right_hand_controls_in_order`, `a_wide_app_bar_shows_a_search_field_with_the_palette_shortcut`, `the_search_field_follows_the_palettes_shortcut`, `a_long_shortcut_leaves_the_search_hint_readable`, `a_click_on_the_search_field_opens_the_palette`, `the_search_icon_has_the_fields_name_and_both_are_disabled_under_a_dialog`, `the_keyboard_opens_the_palette_from_the_search_field`, `a_narrowing_app_bar_turns_the_search_field_into_the_icon`).
- The Learn panel (Window › Learn, or Explore tutorials beside the search field on the app bar) has a For you tab with a Get started section and a Quick skill guide card, and a Skills tab that lists VectorCraft's own skills with their progress rings and counts of tutorials finished; a skill lists its tutorials, a tutorial shows its numbered steps, and Back goes up a level; `learn.list`, `learn.tab {tab}`, `learn.skill {skill}`, `learn.show {tutorial}` and `learn.back` script it, and the tab buttons, the rows and Back run them ([the help page](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/learn-skills-quick-skill-guide.html); `panels::learn::tests`).
- A tool's name in a Learn tutorial step is a blue link that shows where the tool is without choosing it (`learn.locateTool {tool}`): its toolbar button is marked, a collapsed group's flyout opens with the tool's row marked, a torn-off strip comes to the front, and a tool no shown toolbar holds is marked in the All Tools drawer. The mark, its 3 seconds and the hidden-toolbar cases are VectorCraft's own rules ([the help page](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/learn-skills-quick-skill-guide.html); `panels::learn::tests`, the `a_learn_link_*` tests in `toolbar::tests`).
- Under a tutorial's steps, View more opens the tutorial's own practice sample as a new untitled document, and once the tutorial is finished, Next Up moves to the next tutorial in the same skill, as the help page describes ([the help page](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/learn-skills-quick-skill-guide.html)). The samples are VectorCraft's own drawings. A Finish tutorial button that shows once the sample is open, the untitled copy, Back to skills in place of Next Up after a skill's last tutorial, and Next Up showing the next tutorial without opening its sample are VectorCraft's own rules. `learn.openSample`, `learn.finish`, `learn.next` and `learn.skills` (Back to skills) script them. Not done: the help page's short video. Regression tests: `view_more_opens_the_tutorial_s_sample_as_a_new_untitled_document`, `finishing_a_tutorial_offers_next_up_in_its_skill`, `the_practice_controls_work_from_the_keyboard`, `the_last_tutorial_of_a_skill_offers_back_to_skills`, `learn_finish_and_learn_next_follow_the_practice`, `learn_skills_shows_the_list_of_skills`, `the_practice_commands_reject_a_missing_or_unknown_tutorial`, `every_tutorial_has_its_own_readable_sample` and `the_next_tutorial_is_the_next_one_in_the_same_skill` in `crates/ui-egui/src/panels/learn/tests.rs`.
- A Learn tutorial's steps are marked complete as the learner works, and a skill's progress ring fills as its tutorials are finished, as the help page describes ([the help page](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/learn-skills-quick-skill-guide.html)). Each step has a check box that marks it done once the tutorial's sample is open (`learn.markStep`); Finish tutorial marks every step done; a skill's count shows its tutorials finished of all, and a finished tutorial has a check mark in its skill's list. Marking steps by hand, the count, keeping the progress in the preferences (the web build keeps it while the page is open) and Reset progress (`learn.resetProgress`) are VectorCraft's own rules; `learn.list` reports the progress. Regression tests: `a_step_s_check_box_marks_only_that_step`, `a_step_s_check_box_works_from_the_keyboard`, `finishing_tutorials_fills_their_skill_s_ring_and_count`, `a_skill_with_no_tutorials_shows_0_of_0`, `learn_mark_step_checks_its_params`, `reset_progress_clears_only_the_progress`, `the_preferences_keep_the_progress` and `saved_progress_is_read_leniently` in `crates/ui-egui/src/panels/learn/tests.rs`.
- The Home screen has a Learn section with the in-app tutorials, as the help page lists among the Home screen's options ([the help page](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/homescreen-overview.html)): the Quick skill guide card shows the Learn panel's list of skills (`learn.skills`), and each tutorial, listed under its skill, shows the panel at its steps (`learn.show`). It shows with no document open and over open documents, and a choice leaves the documents as they are. Its place between Recent Files and the new-file presets, its layout and what a choice opens are VectorCraft's own rules (`tests::home::home_has_a_learn_section_that_opens_the_learn_panel`, `home_learn_section_over_open_documents_leaves_them_as_they_are`, `home_quick_skill_guide_card_works_from_the_keyboard`).
- The errors of the blend spine commands (Move Spine Point, Reshape Spine Segment, Add Spine Point and Delete Spine Point) show in the status bar in the interface language: each has a row in every catalog that translates all status and error messages and in Bulgarian (`blend_spine_param_errors_are_translated`).
- The errors of the 3D effects (Extrude & Bevel, Revolve, Inflate, Rotate and their Classic forms) show in the status bar in the interface language: the art a 3D effect cannot build a solid from, invalid light, graphics and surface settings, and the notes for an object that draws no 3D faces or more wireframe edges than the limit. Each has a row in every catalog that translates all status and error messages, and the effect's name and the values in the message are translated or kept as written (`three_d_refusals_are_translated_in_every_complete_catalog`, `three_d_refusals_translate_with_their_values`).
- The errors of an SVG filter that the New or Edit button of Apply SVG Filter or an `svg.filter` effect refuses show in the status bar in the interface language: XML that cannot be read, a missing or too long id, an element or event attribute a filter does not take, an image that is not a `data:` URL, and the limits on primitives, `numOctaves`, `order`, `radius`, `stdDeviation`, `kernelUnitLength`, image pixels, nesting and size. Each has a row in every catalog that translates all status and error messages, and the limits, element and attribute names and the XML parser's position are kept as written (`svg_filter_refusals_are_translated_in_every_complete_catalog`, `svg_filter_refusals_translate_with_their_values`). Items side by side in a menu show different labels in every interface language (Effect › 3D and Materials › Revolve… and Rotate… in Turkish and Bulgarian, Effect › Warp and Distort, the Pathfinder effects, the Warp styles, Window › Attributes and Properties, and the whitespace characters), and no menu item shows a command id in place of its label (`menu_items_side_by_side_have_different_labels`, `menu_items_never_show_an_id`).
- Keyboard Shortcuts shows each entry under a name of its own in every interface language: the Scale and Zoom tools, the Column and Bar Graph tools and their stacked forms, the Pucker and Wrinkle tools, the Shear and Warp tools, Edit › Copy and Duplicate, Pathfinder Unite and Merge, and View › Saved View 2 to 17 have different names in every catalog (`no_two_entries_have_the_same_name_in_any_language`). The Line Graph tool reads as a line graph in Russian and Ukrainian, and in every catalog a row whose English name ends with a number keeps that number (`numbered_rows_keep_their_number`).
- The errors of the parameter checks that many commands share show in the status bar in the interface language: a value that is not a number where a number goes (`object.move` with `"dx": "60 mm"`, and `object.rotate`, `object.setBounds` and the other commands that call `check_numbers`), a missing number or index, `ids` that are not a list of object ids, an object id that is not a non-negative integer or names no object, and a date that is not Unix seconds. Each has a row in every catalog that translates all status and error messages, and in Bulgarian, Danish, Indonesian and Dutch (`shared_param_check_errors_are_translated`).
- File Info's (`file.info`) error for a value with control characters shows in the status bar in the interface language for every field: "description has control characters" for Description and Copyright Notice, which take line breaks and tabs, and "title has control characters or line breaks" for the other text fields and each keyword in a list. Each is its own message with a row in every catalog that translates all status and error messages, and the field's key stays as written (`file_info_control_character_refusals_translate_in_every_complete_catalog`, `control_characters_are_refused_with_the_field_rule`).
- A parameter schema's errors show in the status bar with what the value must be in the interface language, for every type a schema has (a number with each kind of range and with a unit, an integer and its range, true or false, a string, a list of names, an object id, a list of object ids, a color, a point, an object and a list), in every catalog that translates all status and error messages; the path, the refused value, the bounds, the unit and the names stay as the English gives them. The error for a value that is not one of its names is also translated in Bulgarian, Bosnian, Danish, Indonesian and Dutch (`parameter_schema_expected_phrases_are_translated`, `bracketed_message_parts_translate_only_as_exact_messages`).
- The error for an unknown key inside an options object (`marks.ofset` in `document.exportPdf`, a format under `settings` in `document.exportForScreens`), a PDF or print setting outside its range (`marks.weight must be 0.05–2 pt (got 9)`), the raster effect resolution warning for a named object, the note that VectorCraft started again on another graphics processor and the status after a print job is sent show in the status bar in the interface language, in every catalog: each message is made with one value for the key path, the range with its unit or the object with its name, so a catalog row can match it, and the English stays as before (`messages_with_joined_values_translate_whole`). A message or catalog row with two placeholders in a row fails `message_templates_have_text_between_their_placeholders` or `bundled_catalogs_have_no_message_row_they_leave_out`, and the untranslated report counts a row the catalog cannot use as missing.
- A script's error about answers in `answers` that it did not use, and Liquify's warning about the objects under the brush that it left as they were, show in the status bar in the interface language for one answer or object as well as for several, with the count's own form in each catalog that translates all status and error messages; the English the commands return stays as it was (`messages_with_one_or_several_items_translate_in_every_complete_catalog`, `unused_answers_are_counted_in_the_singular_and_the_plural`, `liquify_warns_about_one_or_several_skipped_objects`).
- In that Liquify warning, the tool's name and each kind of object it left (graphs, type, symbols, images, meshes, envelopes, repeats, placed documents, blends) are shown in the interface language too, in the order the command lists them and joined as the language joins a list, in each catalog that translates all status and error messages (`liquify-tool`, `liquify-kind` and `liquify-list-*` rows); a kind that Liquify does not list leaves the tool and the list in English (`liquify_warning_translates_its_tool_and_kinds_in_every_complete_catalog`).
- An effect a plug-in's output or an importer plug-in's objects carry that VectorCraft refuses (``[0] `id`: reason``) shows in the status bar with its reason in the interface language inside `plug-in output: …` and `can't open …`, in every catalog that translates all status and error messages; the index and the effect id stay as they are, and a JSON array in a message stays as it is (`nested_effect_refusals_translate_with_their_reason`, `bracketed_message_parts_translate_only_as_exact_messages`).
- The untranslated report lists the status and error messages of the effects, swatch libraries, raster sizes and encoders, 3D solids and path operations that a catalog lacks, the messages that a `.map_err` closure or a named error handler returns, and the phrases a parameter schema's error builds for what a value must be (`untranslated_report_checks_every_message_crate_and_schema_phrase`, `message_scan_reads_map_err_closures`, `message_scan_reads_named_map_err_handlers`).
- The Swedish catalog has rows for the Apply SVG Filter and Check Spelling command names, the SVG Filter effect's name, which also names its undo step, and the 3D and Materials panel's note that graphics map onto the Plane, Extrude and Revolve object types, so these show in Swedish instead of English (`swedish_svg_filter_spelling_and_3d_labels_are_complete`).
- Spanish messages (2026-11-13): the Spanish catalog (`crates/ui-egui/src/i18n/es.tsv`) has an `@msg` row for 114 of the 167 status and error messages that the untranslated report (`untranslated_report`) lists as missing in all 23 complete-message languages: the errors of the image encoders, color profiles, swatch exchange files and color books, 3D and Revolve, path operations, DXF import, the script engine and the parameter checks. Open #7211 and #7378 translate 51 of the others (the composite font and SVG filter errors), and 2 stay in English. The rows keep the placeholders, backticked names, accepted values and limits of their English (`spanish_translates_encoder_profile_swatch_revolve_and_parameter_errors`); native review remains; scores and estimates unchanged.
- Export commands run through MCP, the control channel or the CLI refuse a key that no format takes, and warn about a key that only another format takes (`{"format": "pdf", "quality": 80}` writes the PDF with the warning "`quality` was not used: PDF files don't read it"; `an_option_only_another_format_reads_gets_a_note`, `control_export_notes_an_option_the_format_does_not_read`, `convert_warns_about_an_unused_option_only_when_one_was_given`), and a command that writes one format (`document.exportPdf`, `document.exportEps`, `document.exportDxf`) or takes one format's options (`document.pdfSettings`, `pdf.preset.save`) refuses a key that format doesn't take. An unknown key inside `marks`, `bleed`, `compression`, `output`, `advanced`, `security` or `flattener` is refused by its path.
- Save commands run through MCP, the control channel or the CLI (`document.save`, `file.saveAs`, `file.saveCopy`, `file.saveAsTemplate`, `app.save`) refuse a key that no save format takes, beside the path or in `options`, and warn about a key the file doesn't read, beside the path or in `options`, with an export's `.ai` rules; Save Options sends a `.ai` save only the options the chosen version reads (`a_save_notes_the_ai_options_its_file_does_not_read`, `ai_save_options_send_only_the_options_the_version_reads`). Export for Screens refuses a key it doesn't take, and a key that no format takes in a format row or in a format's settings, by its path (`formats[1].marks.useDocumentBleed`), and warns about a key there that only another format takes (`a_row_option_only_another_format_reads_gets_a_note`); Export Assets (`assets.export`, `assets.settings.set`) checks the rows and settings it is given the same way.
@@ -1062,6 +1113,8 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **9-slice guides outside the art** ([the help page](https://help.adobe.com/archive/en/illustrator/cs6/illustrator_reference.pdf), Use 9-slice scaling section): a guide may lie outside the symbol's art, set by dragging it past the art's edge in symbol editing mode, by `symbol.options`'s `nineSliceGuides` or by a Symbol Options field below 0% or above 100%, and a scaled instance still scales, by the cells its art falls in. VectorCraft's own rules: each guide lies within 16 times the art's width or height of its edge (`-16..16` as a fraction, `-1600..1600` in percent) and the two guides of an axis keep their order; a guide past an edge of the art cuts the art at that edge, so the outer cell on its side holds no art; with both guides of an axis past opposite edges the art scales as a whole along it; with both past the same edge the art lies in the outer cell at the other edge and keeps its size, from that edge of the instance, or shrinks to the instance's width or height when the instance is smaller than the art; Symbol Options shows and keeps the guides unrounded. Native files keep the guides exactly; SVG and `.ai` write such an instance as its placed art and keep no guides. Tests: `symbol_nine_slice::tests::guides_outside_the_art_are_accepted_in_order_and_within_the_limit`, `art_scales_by_the_cells_it_falls_in_when_guides_lie_outside_it`, `the_map_with_guides_outside_the_art_is_continuous_and_monotone` in `crates/doc`, `guides_outside_the_art_are_set_by_command_and_scale_by_the_cells_that_hold_art`, `a_guide_dragged_past_the_arts_edge_lies_outside_it`, `guides_outside_the_art_survive_saving_and_reopening_a_native_file` in `crates/engine`, `nineslice::tests::a_guide_outside_the_art_is_taken_and_dragged_past_the_arts_edge`, `a_nine_slice_instance_with_a_guide_outside_its_art_is_written_as_drawn` (SVG and `.ai`).
- **Delete Symbol asks first** ([Symbols panel](https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/symbols-panel-options.html), [symbol libraries](https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/create-or-import-symbol-libraries.html), [Alt-click Delete](https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html)): the Symbols panel's Delete Symbol button and menu item ask "Delete the selected symbol?" with Yes and No for a symbol no instance uses. For a symbol with placed instances they ask with Expand Instances (the instances become ordinary art), Delete Instances and Cancel; either Instances button deletes the symbol in one undo step. Alt-click on the button deletes an unused symbol without asking and still asks about one with instances. A question left open while another document became active deletes nothing. `symbol.delete` itself does not ask. Tests: `panels::symbols::tests::delete_symbol_asks_first_and_alt_click_deletes_an_unused_symbol_at_once`, `the_in_use_question_expands_or_deletes_the_instances`, `a_stale_delete_symbol_question_deletes_nothing`, `the_delete_symbol_questions_show_their_buttons`.
- **Symbols panel context menu** ([Symbols panel](https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/symbols-panel-options.html)): right-clicking a symbol in thumbnail view or list view displays a context menu with Place Symbol Instance (passes view center or artboard center), Edit Symbol, Duplicate Symbol, Delete Symbol, Break Link to Symbol (enabled when canvas selection includes instances of this symbol), and Select All Instances. Right-clicking an unselected symbol selects it first (`symbol.setCurrent`). Tests: `panels::symbols::tests::right_click_context_menu_in_symbols_panel_runs_actions`.
- **Drag a symbol onto New Symbol to duplicate it** ([the help page](https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf#page=197), Duplicate a symbol in the panel section): a symbol dragged from the Symbols panel, in thumbnail view or a list view, and released on the New Symbol button is copied as Duplicate Symbol copies it (`symbol.duplicate`), with no Symbol Options dialog, even while no art is selected and the button is disabled for clicks. VectorCraft's own rules: the copy is made of the dragged symbol, not the current one, under Duplicate Symbol's default name, in one undo step; the current symbol and the selection stay as they were and no instance is placed; the button is outlined while a symbol of the document is held over it; a library symbol, art, a name the document no longer has or a symbol dragged from another document is ignored. Tests: `panels::symbols::tests::symbol_dropped_on_new_button_duplicates_the_dragged_symbol_in_both_views`, `new_symbol_button_ignores_other_drops_and_releases_outside`, `a_symbol_dragged_from_another_document_is_not_duplicated`.
- **Drag a symbol onto Delete Symbol to delete it** ([the tutorial](https://shop.smashingmagazine.com/2011/09/an-in-depth-study-of-symbols-in-illustrator-cs5/), [Symbols panel](https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/symbols-panel-options.html)): a symbol dragged from the Symbols panel, in thumbnail view or a list view, and released on the Delete Symbol button is deleted as a click on the button deletes it (`symbol.delete`): an unused symbol asks "Delete the selected symbol?", a symbol with placed instances asks with Expand Instances, Delete Instances and Cancel, and Alt held at the release deletes an unused symbol without asking. VectorCraft's own rules: the dragged symbol is deleted, not the current one, in one undo step; a symbol that Select All Unused picked deletes every picked symbol still unused, after one question, and a symbol outside the pick is deleted on its own; the button is outlined while a symbol of the document is held over it; a library symbol, art, a name the document no longer has or a symbol dragged from another document is ignored. Tests: `panels::symbols::tests::symbol_dropped_on_delete_button_deletes_the_dragged_symbol_in_both_views`, `a_picked_symbol_dropped_on_delete_deletes_the_picked_symbols`, `delete_symbol_button_ignores_other_drops_and_releases_outside`.
- **Symbols › Select All Unused** ([Symbols panel](https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/symbols-panel-options.html), #4918): the Symbols panel menu's Select All Unused shows the symbols nothing places selected (`symbol.unused`): instances in the art (opacity masks included), graph designs, pattern tiles and brush art count, and so do instances in a used symbol's art. Delete Symbol, the button or the menu item, then asks "Delete the selected symbols?" once and deletes those still unused in one undo step (`symbol.delete {names}`); Alt-click on the button deletes them without asking, and a click on a symbol picks just it again. Tests: `tests::brushsym::symbol_unused_lists_the_symbols_nothing_places_and_delete_takes_several`, `panels::symbols::tests::select_all_unused_picks_the_unused_symbols_and_delete_deletes_them`, `dialogs::symbol_delete::tests::several_symbols_get_the_plural_question`.
- **Symbols › Sort by Name and the list views** ([the help page](https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/symbols-panel-options.html)): the Symbols panel menu's Sort by Name puts the symbols in alphabetical order (`symbol.sortByName`), and its Thumbnail View, Small List View and Large List View show them as thumbnails, in a compact list or in a list with larger thumbnails. VectorCraft's own rules: the sort ignores case and keeps names that differ only in case in their order; it changes the document's order, which `symbol.list` reports, as one undo step, keeps the current symbol and adds no undo step when the symbols are already in order; Thumbnail View is the default, Small List View has 18-point rows with 14-point thumbnails and Large List View 26-point rows with 22-point thumbnails, and a click or double-click on a symbol does the same in every view. `ui.panelView` sets the view of the Symbols panel, and of the Swatches and Graphic Styles panels, as their panel menus do. Tests: `tests::brushsym::symbol_sort_by_name_orders_the_symbols_in_one_undo_step`, `panels::symbols::tests::sort_by_name_and_the_small_and_large_list_views`, `panels::symbols::tests::panel_view_sets_the_view_of_each_panel`.
- **The Symbols panel reads its current symbol from the document:** the Symbols panel and its panel menu read the current symbol on each frame without running `symbol.list`, which counts every symbol's instances by walking the whole document. The current symbol they show and act on is the one `symbol.list` reports, and an idle frame of the panel or its menu runs no command, so on macOS the native menu is not brought up to date on every frame while the panel is open. In a document with 200 symbols and 50,000 objects, the read takes 0.035 µs instead of 48.5 ms in a release build (thread CPU time on Linux, median of 7 runs); in a small document the difference is too small to notice. Tests: `tests::brushsym::current_symbol_is_the_current_symbol_list_answers`, `panels::symbols::tests::current_is_the_current_symbol_list_answers`, `panels::symbols::tests::idle_frames_of_the_panel_and_its_menu_run_no_command`; the timing probe is `panels::symbols::tests::current_symbol_read_timing`.
@@ -1099,7 +1152,9 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- Dialogs move by dragging their heading (the band down from the top edge, as a title bar), stay on screen and keep where they were moved for the session; the form dialogs' choices are dropdowns (Offset Path's Joins, Average's and Shear's and Reflect's axis), and Offset Path lists Offset, Joins, Miter Limit and previews (#423).
- Dialogs open with their first field focused and its value selected: type a value and press Enter (Move, Rotate, Scale…). A dialog opened from a menu takes the keyboard focus every time it opens, not only the first (#1367), and one whose first field starts greyed out (Blend Options on Smooth Color, Layers Panel Options) gives the focus to that field once it is enabled (#1395). Number fields in panels, the Control bar and dialogs (preferences too) step with Up/Down, or with the mouse wheel over the hovered field without requiring focus (#485, #5949: a notch a step; the panel under it then stays put, and a disabled field leaves the wheel to scrolling) (Shift: ten, Ctrl/Cmd: a tenth of their unit), applied at once. A field takes the wheel only when the pointer was moved onto it after the field last moved or was covered by a window or overlay, and the wheel stream began there; a stream that began elsewhere, such as a panel scrolled under a still pointer, stays there until 0.5 s pass with no wheel input or the pointer is pressed on a field (VectorCraft's own rule and value).
- While Alt (Option on macOS) is held, the Flare Tool Options' Cancel button reads Reset, which puts every option back to the Flare tool's default and leaves the dialog open (`ui.dialogReset`).
- An Alt-click (Option-click on macOS) with the Flare tool draws a flare centered at the click at once, without opening the Flare Tool Options, as [the help page](https://help.adobe.com/archive/en_US/illustrator/cs3/illustrator_cs3_help.pdf) describes for a default flare. As VectorCraft's own rules, the flare takes the tool's current options (the defaults until they are changed), Alt counts when it is held as the button goes down, a drag with Alt still draws the flare in two stages, and on the active perspective plane the flare is the one the click dialog's OK draws there (`alt_click_draws_a_flare_with_the_options_at_once`, `alt_click_draws_on_the_active_perspective_plane`, `an_alt_click_with_the_flare_tool_draws_the_flare_the_click_dialog_draws`).
- While a flare's center is dragged out, Ctrl (Command on macOS) keeps the center's size and the drag sizes the halo; while its rings' end point is placed, Up/Down Arrow add and remove rings and ~ places them anew (`shape.flare`'s `ringSeed`) ([Draw and edit flares](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/draw-and-edit-flares.html); `flare_arrows_change_the_rays_then_the_rings`, `flare_tilde_places_the_rings_anew`, `flare_ctrl_keeps_the_center_and_the_drag_sizes_the_halo`).
- Flare ring placement accepts small `ringSeed` values, including 0, without concentrating the first ring at the center; the same seed and parameters reproduce the same positions. This seed mapping is VectorCraft's own (`flare_small_ring_seeds_spread_the_first_ring_along_the_path`, `flare_ring_seed_moves_only_the_rings`).
- A plain step of a number field (Up/Down or a wheel notch) goes to the next whole unit in its direction and a Ctrl/Cmd step goes to the next tenth, so 5.1 mm steps up to 6 mm and down to 5 mm (#2881). A Shift step adds or takes ten and keeps the fraction.
- In the number, text and color fields of the panels and the Control bar, Shift+Enter (Shift+Return) applies the value and keeps the field active with its value selected; a text box of several lines takes it as a line break. In a dialog, Shift+Enter applies the value and confirms the dialog, as Enter does.
- The Pattern Options panel's Name field and the name fields that a double-click opens in the Layers, Artboards and Asset Export panels take Shift+Enter (Shift+Return) the same way: it applies the name and keeps the field active with the name selected.
@@ -1127,14 +1182,17 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- With the Selection tool, a Character or Paragraph panel change to a selected frame of threaded text changes every frame of its story, locked and hidden frames included, as one undo step. The anti-aliasing method, Variable Font axes, the Tabs panel's tab stops and both panels' Reset Panel change the whole story too, and the panels show a value only when every frame of the story has it. A story selected through several of its frames or through a group is changed once, and other type keeps its formatting (VectorCraft's own behavior; `panels::character::tests::selection_tool_changes_reach_every_frame_of_the_story`, `selection_tool_fields_read_every_frame_of_the_story`, `selected_stories_list_each_frame_once`, `panels::paragraph::tests::selection_tool_paragraph_changes_reach_every_frame_of_the_story`, `panels::tabs::tests::selection_tool_tab_stops_reach_every_frame_of_the_story`).
- With the Selection tool, the Justification dialog, the OpenType panel, a Character or Paragraph Styles row and Type › Bullets and Numbering › Convert to Text also change every frame of a selected story, locked and hidden frames included, as one undo step. The Justification dialog acts on the story's frames as they were when it opened. When the frames differ, the OpenType panel's Figure menu shows Mixed, its checkboxes show a dash (a click turns the feature on everywhere), and the style panels highlight no row; a row shows "+" when any frame overrides its style (VectorCraft's own behavior; `dialogs::justification::tests::selection_tool_justification_reaches_every_frame_of_the_story`, `panels::opentype::tests::selection_tool_features_reach_every_frame_of_the_story`, `panels::text_styles::tests::selection_tool_styles_reach_every_frame_of_the_story`, `panels::paragraph::tests::selection_tool_convert_to_text_takes_every_frame_of_the_story`).
- With the Selection tool, the Character and Paragraph panels work out the list of selected stories once, not once for each of the 24 fields they show by default, and reuse it until the document, its revision or the selected objects change. The panels show the same values. With 200 threads of 10 frames and 2,000 point type objects selected, one frame of both panels takes 21.7 ms of CPU time in a release build instead of 81.7 ms (`panels::character::tests::kept_selected_stories_follow_the_document_and_the_selection`, `panels_show_the_same_with_the_kept_selected_stories` and `panels_work_out_the_selected_stories_once_per_frame`).
- While the Type tool edits text, the Character section of the Properties panel shows the font family and style and the Variable Font button of the first selected character (or of the character before the caret), as the Character panel does, not those of the text object's first run. With the Selection tool it shows the first run's, as before (#8189; `panels::properties::tests::character_section_shows_the_type_tool_selections_style`).
- Switching from a Type tool to the Eyedropper keeps a whole story selected by Select All: a pick applies to the text of every frame as one undo step, and switching back restores the story selection (VectorCraft's own behavior; `textedit::switching_to_the_eyedropper_keeps_the_whole_story_selected`).
- While the Type tool edits text, a character typed with AltGr is typed and runs no command. Firefox on Windows reports AltGr as Ctrl and Alt held, so in the web build AltGr+L (ł on a Polish layout) does not also open Layer Options for a new layer, and AltGr+Q (@ on a German layout) does not also run Reset Tracking and Kerning. A Ctrl+Alt chord that types no character runs its command.
- While the Type tool edits text on Windows and Linux, Alt chords type special characters at the caret, or in place of the selected text, as one undo step: Alt+8 •, Alt+G ©, Alt+; …, Alt+7 ¶, Alt+6 §, Alt+2 ™, Alt+R ®, Alt+- en dash, Alt+Shift+- em dash, Alt+[ “, Alt+Shift+[ ”, Alt+] ‘ and Alt+Shift+] ’. The Work with type table of [Default keyboard shortcuts](https://web.archive.org/web/20260726060015/https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html) gives these chords for Windows. The chords on Linux, replacing a selection, and typing a character the keyboard layout itself sends with Alt as it came are VectorCraft's own rules. On macOS, Option types these characters as before. Outside text editing the chords type nothing (`shortcuts::tests::alt_chords_type_special_characters_while_editing_text`, `alt_chord_replaces_selected_text_and_repeats`, `alt_chord_text_from_the_layout_is_typed_once`, `alt_chords_outside_text_editing_type_nothing`).
- On a layout without Latin letters, a one-key shortcut goes by the position of the key that typed the character, in the web build too, where the character arrives before its key press: on a Russian layout the P key (`з`) chooses the Pen, and two keys pressed in one frame each run their own shortcut.
- With the Artboard tool, Cmd/Ctrl+A after a click on a row of the Artboards panel selects every artboard, as the macOS menu bar's Select All does then; the active artboard stays active, and the art's selection does not change. After a press outside the panel's list, Cmd/Ctrl+A selects every object again. It used to select every object after a click in the panel too. Public reference: [Select artboards](https://helpx.adobe.com/illustrator/desktop/create-manage-artboards/add-edit-artboards/select-artboards.html).
- Cmd/Ctrl+/ (`appearance.addFill`) and Cmd/Ctrl+Alt+/ (`appearance.addStroke`) add a new fill and a new stroke to the selected objects, as the Appearance panel's Add New Fill and Add New Stroke buttons do, on the keys the reference app's [Default keyboard shortcuts](https://web.archive.org/web/20260726060015/https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html) page lists for adding a new fill and a new stroke. Keyboard Shortcuts lists both under Window › Appearance.
- Cmd/Ctrl+Alt+Shift+. and , (`type.size.increaseByFive`, `type.size.decreaseByFive`) step the font size of the selected type, or of the text the Type tool has selected, by five times the Size/Leading increment (Preferences › Type); Cmd/Ctrl+Shift+. and , still step it by one increment.
- Cmd/Ctrl+Alt+Q (`type.resetTracking`) sets the tracking of the selected type, or of the text the Type tool has selected, to 0 and clears manual kerning while keeping the automatic method, in one undo step; at a caret it resets only the kerning there: of the character before it, or at the start of a line the space before the character after it (#5111).
- Cmd/Ctrl+Alt+K (`type.highlightKerning`) and Cmd/Ctrl+Alt+Shift+F (`type.highlightFontName`) show the Character panel and give its Kerning field the keyboard focus with the value selected, or open its font family menu with the search field focused, on the keys the reference app's [Default keyboard shortcuts](https://web.archive.org/web/20260726060015/https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html) page lists for highlighting kerning and the font name field. The page lists the same key for selecting the tracking value; `type.highlightTracking` focuses the Tracking field the same way and has no default key in Keyboard Shortcuts.
- Type › Size ends with Other… (`type.highlightFontSize`), for a size the list does not hold: it shows the Character panel and gives its Font Size field the keyboard focus with the value selected, and the size typed applies on Enter. [The help page](https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf#page=488) describes Other in the Size menu as the way to enter a new size in the Character panel. Selecting the field's value, the separator before Other… and the item being dimmed without selected type are VectorCraft's own choices.
- Cmd/Ctrl+Alt+L (`ui.newLayer`) opens Layer Options for a new layer, as an Alt-click on the Layers panel's New Layer button does, on the key the reference app's [Default keyboard shortcuts](https://web.archive.org/web/20260726060015/https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html) page lists for adding a layer through the New Layer dialog box. OK adds the layer above the current layer, and Cancel adds none. Cmd/Ctrl+L still adds a layer without the dialog.
- F8 (`ui.symbolOptions`) opens Symbol Options for a new symbol made from the selection, as the Symbols panel's New Symbol button does, on the key the reference app's [Default keyboard shortcuts](https://web.archive.org/web/20260726060015/https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html) page lists for making a new symbol. OK makes the symbol and puts an instance of it in place of the art, and Cancel makes none. With nothing selected, F8 opens no dialog, and the status bar says that nothing is selected. Shift+F8 and Cmd/Ctrl+F8 still show the Transform and Info panels.
- Cmd/Ctrl+Shift+X (`type.resetHorizontalScale`) sets the horizontal scale of the selected type, or of the text the Type tool has selected, to 100% as the Character panel shows it (the object's own stretch included), in one undo step; at a caret it leaves the text as it is.
@@ -1142,6 +1200,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- Cmd/Ctrl+Alt+N (`file.newWithoutDialog`) makes a document without opening the New Document dialog, on the key the reference app's [Default keyboard shortcuts](https://web.archive.org/web/20260726060015/https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html) page assigns to creating a document directly. The page does not say which settings the document gets. VectorCraft gives it the settings the dialog opens on (the first Recent entry, or the Print category's Letter while Recent is empty) and the next untitled name.
- Cmd/Ctrl+F6 (`window.nextDocument`) and Cmd/Ctrl+Shift+F6 (`window.previousDocument`) make the next and the previous open document the current one, in tab order and as a click on its tab does, on the keys the reference app's [Default keyboard shortcuts](https://web.archive.org/web/20260726060015/https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html) page lists for navigating to the next and the previous document. After the last document comes the first, and before the first document comes the last. From the Home screen the keys go to the first and the last document. Keyboard Shortcuts lists both under Window.
- Cmd/Ctrl+Alt+Shift+U (`document.switchUnits`) switches the document to the next unit of measurement, in one undo step, on the key the reference app's [Default keyboard shortcuts](https://web.archive.org/web/20260726060015/https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html) page lists for switching units of measurement. The page does not give an order. VectorCraft steps through the units in the order a right-click on a ruler lists them (Points, Picas, Inches, Millimeters, Centimeters, Pixels, Feet & Inches, Meters, Yards, Feet) and goes from Feet back to Points.
- Ctrl+` (`tool.selectLastSelection`, Select Last Selection Tool) on Windows and Linux chooses the selection tool chosen last of Selection, Direct Selection and Group Selection, on the key [the help page](https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html) lists for switching to the last-used selection tool; Magic Wand and Lasso do not count. Before one is chosen it chooses the Selection tool, and it keeps the remembered tool when that tool is already active. On macOS it has no default shortcut, because the system uses Command+` to switch between an app's windows; Edit › Keyboard Shortcuts can assign one. The first choice and the macOS default are VectorCraft's own rules.
- Shortcut sets other apps save as text (`.kys`) open in Import Shortcut Set from File › Open, from Edit › Keyboard Shortcuts › Import… in the desktop app, or from a drop on the window. It matches each entry to a tool, command or panel by name and decodes the file's key and modifier codes where VectorCraft's default shortcuts agree on them; the user answers the rest, and Apply fills the Keyboard Shortcuts dialog's working set. The answers are kept with the preferences for the next import (`shortcutSet.read`, `importMatches.*`).
- Edit › Keyboard Shortcuts › Export Text… saves the set shown in the dialog as a UTF-8 text file, as the reference app's [Export keyboard shortcuts list as a text document](https://helpx.adobe.com/illustrator/desktop/get-started/preferences-and-settings/export-keyboard-shortcuts-list.html) page describes (`shortcuts.exportText {path?, format?, pageSize?}`). The layout is VectorCraft's own: the set's name, then the Tools and Menu Commands rows in the dialog's order, each with its name, a tab and its shortcuts as the dialog shows them, and nothing after the tab for a row with no shortcut. In the desktop app its save dialog also offers a printable shortcut sheet as a PDF, which `format: "sheet"` also picks (`pageSize: "letter" | "a4"`, A4 when the current document prints on A4): the rows with a shortcut under a colored band per group, in columns on landscape pages, a layout of VectorCraft's own. It also offers a CSV file of the same rows (`format: "csv"`; Group, Command and Shortcut columns). Tests `shortcut_editor::tests::export_text_*`, `shortcut_editor::tests::export_sections_*`, `shortcut_editor::tests::the_save_dialogs_answer_picks_the_export_text_format`, `shortcut_editor::tests::the_sheet_is_on_a4_when_the_document_prints_on_a4`, `shortcut_sheet::tests::*`, `tests::picks::keyboard_shortcuts_export_text_*` and `tests::picks::export_text_with_a_format_gives_the_answered_name_its_extension`.
- On Windows and Linux the app bar is the window's title bar (its own minimize, maximize and close buttons, drag to move, edges to resize), with the dragon app icon as the brand mark; dialogs and menus size to their content. As on a native menu bar, once one menu is open, moving the pointer onto another title opens that one.
@@ -1157,13 +1216,15 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **Shaper:** uneven squares and rectangles become live rectangles even when drawing begins mid-edge. Recognition uses uniformly spaced samples and closed-loop corners, fits rectangle edges/angles rather than requiring a nearly perfect bounding-box fill, and includes the pointer-release position. Rectangles/squares and ellipses snap to 45° steps, hexagons to 90°, and triangles point up or down; lines keep their free angle even with Shift. Shaper Groups retain the live originals, merge regions with the gesture-origin fill, punch fills independently from strokes, remove boundaries on exiting scribbles and trim protruding stroke pieces. Source moves/resizes re-evaluate the result in the same undo step; double-click enters construction editing, and with the Shaper or Selection tool a click on the arrow widget beside a Shaper Group's original shapes switches the group between Face Selection and Construction mode. Native save/reopen, face recoloring, Release and Expand are covered. Finer gesture heuristics remain.
In Construction mode, a Selection-tool drag that drops an original shape wholly outside the bounds of the group's original shapes takes it out of the group in the move's undo step (Remove from Shaper Group, `shaper.releaseSource`): the shape becomes a path above the group and stays selected, and a group left with no shapes is removed. Engine tests drag a shape out of a two-shape group and back across the bounds, take the last shape out, undo, and save the result.
With a Shaper Group or one of its faces selected, a Shaper click within 3 screen pixels of an original shape's outline enters Construction mode with that shape selected, even where the outline runs through a merged face (`shaper.select`'s `tolerance`; [help page](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/create-shapes-with-the-shaper-tool.html)). Test: `tests::shaper::shaper_click_on_an_original_outline_enters_construction_mode`.
- **Selection:** Selection, Direct/Group Selection, Magic Wand, Lasso. A Shift-drag marquee toggles what it reaches: objects with the Selection tool, anchors with Direct and Group Selection (#483); the Lasso adds with Shift and subtracts with Alt. Dragging a path segment with Direct Selection bends it when it's curved (its anchors stay) and moves its two anchors when it's straight, one undo step; the fill, Shift or Alt still pick the whole path (Alt-drag copies it).
- **Selection:** Selection, Direct/Group Selection, Magic Wand, Lasso. A Shift-drag marquee toggles what it reaches: objects with the Selection tool, anchors with Direct Selection (#483), and with Group Selection the objects it touches, whole (#8047); the Lasso adds with Shift and subtracts with Alt. Dragging a path segment with Direct Selection bends it when it's curved (its anchors stay) and moves its two anchors when it's straight, one undo step; the fill, Shift or Alt still pick the whole path (Alt-drag copies it).
The search for the segment of a path nearest a point, which Direct Selection runs to pick the cursor over a segment, skips each segment whose anchors and handles lie in a box farther from the point than a segment already measured, starting with a segment at the anchor nearest the point. The segment found is the same as before. Over a segment of an open path of 200,000 anchors, the cursor takes 51 ms instead of 59 ms in a release build (`cargo run --release -p vectorcraft-engine --example anchor_bench`).
A Direct Selection marquee over part of a segment, with neither of its anchors inside, selects that segment as a click on it does (Shift toggles it), as [Selecting objects](http://web.archive.org/web/20211230015528/https://helpx.adobe.com/illustrator/using/selecting-objects.html) describes (#4654).
To find those segments, the marquee skips each segment whose anchors and handles all lie past one side of it and tests only the rest exactly, without building a path for each segment. It selects the same segments as before, and a marquee over a path of many anchors finishes sooner.
The Direct Selection and Group Selection marquees, the Lasso and Smart Pen select the anchors they reach (`select.anchorsMany`) with one pass over the selected objects, instead of one pass for each path. The objects, their order and the anchors selected are the same as before. Selecting one anchor on each of 50,000 rectangles takes a median of 29 ms of CPU time instead of 776 ms in a release build on Linux, and on 20,000 rectangles 10 ms instead of 124 ms; on 2,000 rectangles both take about 2 ms or less (seven alternating runs, `cargo test --release -p vectorcraft-engine --lib anchor_items_perf -- --ignored --nocapture`).
With the Selection or Group Selection tool, pressing E while dragging a marquee makes the marquee select only the objects that lie entirely inside it. Pressing E again switches the marquee back to its default selection.
With members of a group selected whole (with Group Selection, for example), a Selection-tool press on one of them keeps the selection: the pointer shows Move, a drag moves only the selected members (Shift constrains it), a Shift-click takes the pressed member out of the selection, and Alt over it shows no Distance Guides. A press on a member that is not selected, or only partly selected, still selects the outermost group ([Select objects](https://helpx.adobe.com/illustrator/desktop/manage-objects/select-objects/select-objects.html)). Test: `select::tests::a_press_on_a_selected_member_of_a_group_moves_the_selected_members`.
The Lasso picks anchor points only on art a click can pick, and the Add Anchor Point, Delete Anchor Point, Anchor Point and Scissors tools pick anchor points and segments only on the selected paths and on art a click can pick: not on a Shaper Group's original shapes outside Construction mode, and in isolation mode only inside the isolated group or object. Smart Guides and Snap to Point do not snap to a Shaper Group's original shapes, and the reference point of the transform tools snaps to one only when it is selected, or under the pointer in Construction mode.
Enclosing Lasso provides whole-object enclosure selection under Object › Plug-ins and its own heading in All Tools. It has no default shortcut or Basic toolbar slot. It follows path curves and keeps partially enclosed objects out, including objects crossing a concave part of the loop. Ordinary group members can be selected individually; compound paths remain whole. This is a VectorCraft addition; scores and estimates are unchanged.
Enclosing Lasso provides whole-object enclosure selection under Object › Plug-ins. Its tool is also in the Lasso tool's group in both shipped toolbars, after the Lasso, and All Tools lists it there, under Select; a toolbar edited before it joined keeps its saved layout until Reset Toolbar (tests `enclosing_lasso_is_in_the_lasso_flyout` and `a_saved_toolbar_without_enclosing_lasso_keeps_its_layout` in `edit_toolbar::tests`, `enclosing_lasso_is_in_the_lasso_group_once` in `addons::tests`, `headless_backend_methods` in `vectorcraft-mcp`). It has no default shortcut. It follows path curves and keeps partially enclosed objects out, including objects crossing a concave part of the loop. Ordinary group members can be selected individually; compound paths remain whole. This is a VectorCraft addition; scores and estimates are unchanged.
Polygonal Lasso selects anchor points (and gradient mesh points) inside a straight-edged loop, with the Lasso's rule for which points are inside, and is listed under Object › Plug-ins and under its own heading in All Tools. It has no default shortcut or Basic toolbar slot. Each click sets a vertex. A double-click, Enter or a click on the first vertex closes the loop, Backspace or Delete removes the last vertex, Escape drops the loop, and Shift keeps the next segment to 45° steps. Shift or Alt held at the first click adds to or subtracts from the selection. This is a VectorCraft addition; scores and estimates are unchanged.
Select by Artboards (Object › Plug-ins › Selection Tools, a VectorCraft addition: #5525, #5548, #5549) selects the objects overlapping, fully inside or fully outside one or more chosen artboards (`addon.select.byArtboards {artboards, relation}`). Overlapping is All on Active Artboard's test, shared as `select::on_artboard`; Fully inside means within one artboard, edges included; Fully outside means on none. It looks at what Select All takes, so hidden, locked and locked-artboard art stays out. Its dialog lists each artboard's number, name and size in the document's units, filters by name, chooses rows with click, Shift-click and Cmd/Ctrl-click, and fits a row's artboard in the window on double-click (`view.goToArtboard`). Tests: `crates/engine/src/cmd/addons/select/tests.rs`, `crates/ui-egui/src/addons/select/tests.rs`, `crates/engine/tests/command_sweep.rs`.
Select by Link Status (Object › Plug-ins › Selection Tools and the Links panel menu, a VectorCraft addition: #5526) selects the image objects and placed documents whose link is linked (its file found unchanged), embedded, missing or modified, as `links.list` reports it (`addon.select.byLinkStatus {status, ids?, add?, zoom?}`); Select Linked, Embedded, Missing and Modified are off when no image has that status and add to the selection with Shift. Objects that are hidden or locked, inside a hidden or locked object or layer, on a template layer, on a locked artboard, or outside the isolated group are left out (the `select::is_selectable` test) and returned with the reason, and the status bar says how many, in plural forms of every catalog. Select by Link Status… lists each image and placed document with its name, status and format, searches by name, filters by status, picks rows with checkboxes and All / None, and zooms to the selection with the existing Zoom to Selection (`addon.arrange.zoomSelection`). Missing-link markers on the canvas are #5547. Tests: `crates/engine/src/cmd/addons/select/tests.rs` (`by_link_status`), `crates/ui-egui/src/addons/select/link_status/tests.rs`, `crates/engine/tests/command_sweep.rs`.
@@ -1171,7 +1232,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
When a clip group, a layer with a clipping mask or a single object in one is isolated, the Selection, Direct Selection and Group Selection tools also select the art that the mask hides, by a click or a marquee, and a drag from that art moves it (#3748). In isolation mode the canvas Unlock submenu also lists that art when it is locked. Outside isolation mode a click selects clipped art only inside the mask.
A marquee selects a Shaper Group only when it reaches the art the group shows, not the original shapes kept under it, and Direct Selection's clicks and marquee do not select those shapes' anchor points. In Construction mode a marquee selects the original shapes, and Direct Selection selects their anchor points.
While an opacity mask or a pattern is edited, a Shaper double-click on a Shaper Group in the mask or pattern art selects the original shape under the pointer without entering Construction mode, the Shaper Group's mode widget does not show, and a Shaper scribble, Release and Expand keep the editing layer isolated.
A marquee selects an Intertwine group only when it reaches one of the group's members, as for a plain group, and it selects a repeat only when it reaches one of the copies the repeat draws. Direct and Group Selection's marquees select the anchor points of an Intertwine group's members, not the group, and Group Selection's E marquee selects the members inside it.
A marquee selects an Intertwine group only when it reaches one of the group's members, as for a plain group, and it selects a repeat only when it reaches one of the copies the repeat draws. Direct Selection's marquee selects the anchor points of an Intertwine group's members, not the group; Group Selection's marquee selects the members it touches, whole, and its E marquee selects the members inside it.
A key object needs another selected object outside it. A Shift-click or any other change that leaves one object selected clears the key, and `select.key` sets none on one object or on a group selected with only its own members. With one object selected, the Align panel, the Control bar and the Properties panel align it to the artboard whatever Align To is set to.
With two or more objects selected and no key object, Align to Key Object makes the topmost of them the key, whatever order they were selected in, and the Align panel, the Control bar and the Properties panel align to it. Align To keeps its Selection or Artboard choice and shows it again once the key is cleared.
The Control bar has an Align To menu after its Align buttons. The public documentation offers Align to Selection, Align to Key Object and Align to Artboard in the Control panel (VectorCraft's Control bar) as well as in the Align panel ([Move, align, and distribute objects](https://web.archive.org/web/20250115013546/https://helpx.adobe.com/illustrator/using/moving-aligning-distributing-objects.html)). The menu shows the icon of the choice the Align panel's Align To shows, and a pick sets the same choice as the Align panel's buttons do. Align to Key Object is off while no key object can be made. When the bar runs short of room, it drops the Distribute buttons first, then the Align To menu, then the Align buttons.
@@ -1184,8 +1245,10 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
Agents read the key object: `select.key` returns it, and `document.inspect` and the `ui.pointer` and `pointer_gesture` replies report it as `key`. `select.key` with an id that isn't a selected top-level object returns an error and leaves the key unchanged.
The Select menu's Same commands, its Object commands that select art, Next Object Above and Below, saved selections and the Magic Wand (#2655) select only objects that Select All selects and objects inside them: nothing hidden or locked, nothing in a hidden or locked group, layer or sublayer, nothing on a template layer, and in isolation mode nothing outside the isolated group or layer. In isolation mode Select All, All on Active Artboard and Inverse select nothing while the isolated group or layer, or a group or layer it is in, is hidden, locked or a template layer.
In a CMYK document the Magic Wand's Fill Color and Stroke Color tolerances run from 0 to 100 and compare the colors' CMYK values; in an RGB document they run from 0 to 255 and compare RGB values, as the [help page](https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf) gives the two ranges. The distance is VectorCraft's own: the Euclidean distance between the C, M, Y and K percentages, with RGB, Gray and Lab colors converted to CMYK. A tolerance above 100 set in an RGB document applies as 100 in a CMYK document and comes back in an RGB one. `magicWand.set` refuses a tolerance out of its range and changes nothing (`cmyk_document_compares_fill_and_stroke_colors_in_cmyk`, `set_rejects_tolerances_out_of_range_and_changes_nothing`).
The Magic Wand finds compound paths, the selected objects and the objects it picks through hash sets instead of searching lists, and it selects the same objects in the same order. In a release build, with every second object selected in a document of 50,000 paths (12,500 of them in 6,250 compound paths), setting that selection and Shift-clicking takes a median of 142 ms of CPU time, against 353 ms for the same steps run with test-only copies of the earlier searches, and 30 ms against 61 ms at 20,000 paths (7 alternating runs of each in one process, measured while other builds were running; `magic_wand_membership_timing`). Small documents gain little: 2.1 ms against 2.3 ms at 2,000 paths. `membership_sets_give_the_same_objects_in_the_same_order_as_searches` compares the selection in each mode with the earlier searches.
Select ▸ Object ▸ Bristle Brush Strokes selects the objects whose topmost stroke has a bristle brush, whatever the brush is named, and leaves out objects whose brush is of another type, also when its name has "Bristle" in it.
Select ▸ Object ▸ Not Aligned to Pixel Grid (`select.object.notAlignedToPixelGrid`) selects the paths and compound paths whose pixel-aligned property is off, whatever their coordinates, and leaves out guides, type, images, groups and the paths inside a compound path ([help page](https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf#page=185); `tests::pixelalign::not_aligned_to_pixel_grid_selects_paths_without_the_property`, `not_aligned_to_pixel_grid_leaves_out_what_cant_be_selected`). It also leaves out symbol instances, area type, type on a path, gradient meshes and placed documents, and the paths on template layers, in hidden or locked sublayers and on locked artboards; it selects the paths in clip groups, blends, envelopes, repeats and Intertwine groups and paths with effects (`not_aligned_to_pixel_grid_leaves_out_images_symbol_instances_and_type`, `not_aligned_to_pixel_grid_leaves_out_template_layers_locked_sublayers_and_locked_artboards`, `not_aligned_to_pixel_grid_selects_clipping_paths_and_paths_with_effects`, `not_aligned_to_pixel_grid_selects_the_paths_of_blends_envelopes_repeats_and_intertwines`, `not_aligned_to_pixel_grid_leaves_out_meshes_placed_documents_and_guides_but_takes_live_shapes`, `not_aligned_to_pixel_grid_takes_a_compound_path_by_its_own_property`).
Select ▸ Object ▸ Direction Handles (`select.object.directionHandles`) builds its selection with one `Selection::set` call, so the time spent building the selection grows in step with the number of paths. With 20,000 four-anchor paths, building the selection takes 1.9 ms of thread CPU time on Linux, against 69 ms when each path is added on its own, and the whole command takes 51 ms (`crates/engine/examples/direction_handles_bench.rs`; `cmd::docmenu::tests::select_anchors_gives_the_selection_one_by_one_selecting_gives`, `tests::menucmds::direction_handles_select_many_paths_in_groups_and_layers_in_paint_order`).
Align and Distribute Spacing keep a compound path or selected group that contains the key object in place, as they keep the key object itself.
Align to Glyph Bounds (#4231): the Align panel menu's Align to Glyph Bounds submenu has Point Text and Area Text, each checked while on (`alignGlyphBoundsPoint`, `alignGlyphBoundsArea`, off by default). With one on, Align, Distribute Objects and Distribute Spacing measure that kind of type by the ink of its glyphs instead of its em box (point type) or frame (area type), so lowercase type aligned to a rectangle's top lines up the tops of its letters; the other kind, type on a path and type in a selected group are measured as before, and Use Preview Bounds adds the characters' strokes ([Align text](https://helpx.adobe.com/illustrator/desktop/design-with-text/edit-format-text/align-text.html); `tests::glyphbounds`, `panels::align::tests::align_to_glyph_bounds_toggles_point_and_area_text`). The Character and Properties panels' controls for the same setting are not done.
Anchor Align moves the selected points to their bounds or the artboard (#1180). Repeating it, or moving by at most 1e-9 pt on both axes as whole-object Align does, leaves the document, Undo, Redo and saved state unchanged; actual moves still take one undo step. `crates/engine/src/tests.rs` covers repeated alignment, rounding-only alignment, unchanged handles, saved state, command recording and Undo/Redo.
@@ -1207,17 +1270,19 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
While Alt is held during a Paintbrush stroke or before a press with no path selected that the Smooth tool can act on, the Paintbrush shows a closing cursor (a crosshair with a ring), and so does the Pencil with Alt key toggles to Smooth Tool off when Alt is pressed after the drag starts; releasing the mouse button with Alt still held closes the path. Before a Paintbrush press with such a path selected, Alt shows the Smooth cursor, and holding Alt at the press smooths that path with the Smooth tool's radius and Smooth Tool Options' Fidelity. A Pencil drag started with Shift or Alt held draws a straight line instead, which stays open.
Smooth Tool Options' Fidelity is in pixels, as [the help page](https://help.adobe.com/archive/en_US/illustrator/cs3/illustrator_cs3_help.pdf#page=79) gives it: the Smooth tool, and an Alt smoothing drag with the Pencil, Paintbrush or Blob Brush, refits the path at Fidelity divided by the zoom, so a drag smooths a path as much on screen at 25 % as at 800 %. Reading the pixels as screen pixels is VectorCraft's own rule, as for the Pencil and the Paintbrush (#5729); the range (0.05 to 100 px) and the default (2.5 px) are VectorCraft's own values, and a saved Fidelity keeps its number (`crates/tools/src/draw2/gesture/tests.rs` test `smooth_fidelity_is_in_screen_pixels_at_any_zoom`, `crates/engine/src/tests/draw2.rs` test `smooth_region_refits_at_the_tolerance_sent_at_any_zoom`).
With Shift held at the press, the Pencil draws a straight line from the press point to the pointer at 45° steps from the Constrain Angle, as [Draw straight lines with the Pencil tool](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/draw-straight-lines-with-the-pencil-tool.html) describes; pressed on an end of a selected open path, the line continues the path from that end (part of #3799). With Option/Alt held at the press and Alt key toggles to Smooth Tool off, the Pencil draws a straight line at any angle, and it stays open when Alt is still held at the release; Shift and Alt together keep the 45° steps (#3799). While Shift or Alt is held before the press, the Pencil shows a straight-line cursor (a crosshair with a short level line), as the page describes. Over an end of a selected open path, where the stroke continues the path, freehand or as a straight line, it shows a path-continuation cursor (a crosshair with a short line rising to the right), as [Extend paths with the Pencil tool](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/extend-paths-with-the-pencil-tool.html) describes, and again while a continuing stroke ends near an open end of another selected path, where the release connects the two ([Connect two paths with the Pencil tool](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/connect-two-paths-with-the-pencil-tool.html)). A continuing stroke, a straight line too, that ends within Close Paths When Ends Are Within of the path's other end shows the closing cursor, and the release closes the path; Alt held at the release closes a continuing freehand stroke too (a straight line stays open, as above).
- **Shapes:** all shape tools (including Flare) and the line, arc, spiral and grid tools. Space held while dragging out a shape, line, arc, spiral or grid moves it at its current size. While a grid is dragged out, Up/Down change its rows (concentric dividers) and Left/Right its columns (radial dividers). A click with a grid tool asks for the size, the divider counts and the grid options (#1377, in part): a skew for each set of dividers, Use Outside Rectangle As Frame or Create Compound Path From Ellipses, and Fill Grid; they are parameters of `shape.rectangularGrid` and `shape.polarGrid`, stay as the tool's options and apply to drags too. A shape just drawn stays adjustable with its tool: its Live Shape widgets drag, a press on its centre point (Show Center) moves the selection with the Selection tool's move arrow, snapping and Alt copy, and a press in the rotate zone just outside a bounding-box corner turns it about the centre with the Selection tool's rotate cursor (#5477; tests `a_shape_tool_moves_the_selection_by_its_centre_point_and_turns_it_from_a_corner` and, through the engine, `shapetools.rs`). A drag on one of its eight bounding-box handles scales it as the Selection tool's handles do, with their cursors and snapping, instead of drawing a new shape from the handle. A shape tool takes a press as a handle's only on the drawn handle square (VectorCraft's own rule: 3 screen points from its centre along each axis at the default Anchor Size, a half point more or less per step; the Selection tool takes 5), so a press just beside a handle still draws (tests `a_shape_tool_scales_the_selection_by_its_bounding_box_handles`, `a_shape_tool_draws_from_a_press_just_beside_a_handle` and `a_shape_tool_scales_the_shape_just_drawn_by_its_bounding_box_handle`). The curve a skew percentage follows and the direction of the radial skew are our own (the public documentation gives neither), and the dialogs have no reference point locator. An ellipse's Pie Start and End Angle and Invert Pie (Transform and Properties panels' Ellipse Properties, `object.setLiveShape {pieStart, pieEnd, invertPie}`) cut it as a pie (#812). With the bounding box showing, the Selection tool shows a selected ellipse's two pie widgets just outside it; dragging one sets its angle in one undo step and double-clicking one makes the ellipse whole again. A live polygon's Polygon Properties there: side count, angle, corner type and radius, radius, side length and Make Sides Equal once an uneven scale has made its sides differ (`object.setLiveShape {sides, polygonAngle, polygonRadius, sideLength, makeSidesEqual}`, part of #812); a star is a plain path, as in Illustrator. The Flare Tool Options last as the tool's options: the next flare dragged out uses them, a click's dialog shows them and double-clicking the tool opens them (part of #812).
- **Shapes:** all shape tools (including Flare) and the line, arc, spiral and grid tools. Space held while dragging out a shape, line, arc, spiral or grid moves it at its current size. While a grid is dragged out, Up/Down change its rows (concentric dividers) and Left/Right its columns (radial dividers). A click with a grid tool asks for the size, the divider counts and the grid options (#1377, in part): a skew for each set of dividers, Use Outside Rectangle As Frame or Create Compound Path From Ellipses, and Fill Grid; they are parameters of `shape.rectangularGrid` and `shape.polarGrid`, stay as the tool's options and apply to drags too. A shape just drawn stays adjustable with its tool: its Live Shape widgets drag, a press on its centre point (Show Center) moves the selection with the Selection tool's move arrow, snapping and Alt copy, and a press in the rotate zone just outside a bounding-box corner turns it about the centre with the Selection tool's rotate cursor (#5477; tests `a_shape_tool_moves_the_selection_by_its_centre_point_and_turns_it_from_a_corner` and, through the engine, `shapetools.rs`). A drag on one of its eight bounding-box handles scales it as the Selection tool's handles do, with their cursors and snapping, instead of drawing a new shape from the handle. A shape tool takes a press as a handle's only on the drawn handle square (VectorCraft's own rule: 3 screen points from its centre along each axis at the default Anchor Size, a half point more or less per step; the Selection tool takes 5), so a press just beside a handle still draws (tests `a_shape_tool_scales_the_selection_by_its_bounding_box_handles`, `a_shape_tool_draws_from_a_press_just_beside_a_handle` and `a_shape_tool_scales_the_shape_just_drawn_by_its_bounding_box_handle`). With such a tool, a double-click on a corner widget of a selected live rectangle or polygon shows and selects the Transform panel, and the tool, the selection and the document stay as they were (test `a_double_click_on_a_corner_widget_shows_the_transform_panel`). The curve a skew percentage follows and the direction of the radial skew are our own (the public documentation gives neither), and the dialogs have no reference point locator. An ellipse's Pie Start and End Angle and Invert Pie (Transform and Properties panels' Ellipse Properties, `object.setLiveShape {pieStart, pieEnd, invertPie}`) cut it as a pie (#812). With the bounding box showing, the Selection tool shows a selected ellipse's two pie widgets just outside it; dragging one sets its angle in one undo step and double-clicking one makes the ellipse whole again. A live polygon's Polygon Properties there: side count, angle, corner type and radius, radius, side length and Make Sides Equal once an uneven scale has made its sides differ (`object.setLiveShape {sides, polygonAngle, polygonRadius, sideLength, makeSidesEqual}`, part of #812); a star is a plain path, as in Illustrator. The Flare Tool Options last as the tool's options: the next flare dragged out uses them, a click's dialog shows them and double-clicking the tool opens them (part of #812).
- **Shapes:** all shape tools (including Flare) and the line, arc, spiral and grid tools. Space held while dragging out a shape, line, arc, spiral or grid moves it at its current size. The Flare tool's center drag turns the rays by 0.1 radian at each drag update in which the pointer's document y grows, and back by as much at each one in which it falls, Shift held keeps their turn, and Space held during either of its drags moves the flare. While a grid is dragged out, Up/Down change its rows (concentric dividers) and Left/Right its columns (radial dividers). A click with a grid tool asks for the size, the divider counts and the grid options (#1377, in part): a skew for each set of dividers, Use Outside Rectangle As Frame or Create Compound Path From Ellipses, and Fill Grid; they are parameters of `shape.rectangularGrid` and `shape.polarGrid`, stay as the tool's options and apply to drags too. The curve a skew percentage follows and the direction of the radial skew are our own (the public documentation gives neither), and the dialogs have no reference point locator. An ellipse's Pie Start and End Angle and Invert Pie (Transform and Properties panels' Ellipse Properties, `object.setLiveShape {pieStart, pieEnd, invertPie}`) cut it as a pie (#812). With the bounding box showing, the Selection tool shows a selected ellipse's two pie widgets just outside it; dragging one sets its angle in one undo step and double-clicking one makes the ellipse whole again. A live polygon's Polygon Properties there: side count, angle, corner type and radius, radius, side length and Make Sides Equal once an uneven scale has made its sides differ (`object.setLiveShape {sides, polygonAngle, polygonRadius, sideLength, makeSidesEqual}`, part of #812); a star is a plain path, as in Illustrator. The Flare Tool Options last as the tool's options: the next flare dragged out uses them, a click's dialog shows them and double-clicking the tool opens them (part of #812).
- **Shapes:** all shape tools (including Flare) and the line, arc, spiral and grid tools. Space held while dragging out a shape, line, arc, spiral or grid moves it at its current size. The Flare tool's center drag turns the rays with the pointer, Shift keeps them in their original orientation (unturned, or turned by a nonzero General › Constrain Angle), and Space held during either of its drags moves the flare. While a grid is dragged out, Up/Down change its rows (concentric dividers) and Left/Right its columns (radial dividers). A click with a grid tool asks for the size, the divider counts and the grid options (#1377, in part): a skew for each set of dividers, Use Outside Rectangle As Frame or Create Compound Path From Ellipses, and Fill Grid; they are parameters of `shape.rectangularGrid` and `shape.polarGrid`, stay as the tool's options and apply to drags too. The curve a skew percentage follows and the direction of the radial skew are our own (the public documentation gives neither), and the dialogs have no reference point locator. An ellipse's Pie Start and End Angle and Invert Pie (Transform and Properties panels' Ellipse Properties, `object.setLiveShape {pieStart, pieEnd, invertPie}`) cut it as a pie (#812). With the bounding box showing, the Selection tool shows a selected ellipse's two pie widgets just outside it; dragging one sets its angle in one undo step and double-clicking one makes the ellipse whole again. A live polygon's Polygon Properties there: side count, angle, corner type and radius, radius, side length and Make Sides Equal once an uneven scale has made its sides differ (`object.setLiveShape {sides, polygonAngle, polygonRadius, sideLength, makeSidesEqual}`, part of #812); a star is a plain path, as in Illustrator. The Flare Tool Options last as the tool's options: the next flare dragged out uses them, a click's dialog shows them and double-clicking the tool opens them (part of #812).
- **Shapes:** all shape tools (including Flare) and the line, arc, spiral and grid tools. Space held while dragging out a shape, line, arc, spiral or grid moves it at its current size. The Flare tool's center drag turns the rays with the pointer, Shift keeps them in their original orientation, and Space held during either of its drags moves the flare. While a grid is dragged out, Up/Down change its rows (concentric dividers) and Left/Right its columns (radial dividers). A click with a grid tool asks for the size, the divider counts and the grid options (#1377, in part): a skew for each set of dividers, Use Outside Rectangle As Frame or Create Compound Path From Ellipses, and Fill Grid; they are parameters of `shape.rectangularGrid` and `shape.polarGrid`, stay as the tool's options and apply to drags too. The curve a skew percentage follows and the direction of the radial skew are our own (the public documentation gives neither), and the dialogs have no reference point locator. An ellipse's Pie Start and End Angle and Invert Pie (Transform and Properties panels' Ellipse Properties, `object.setLiveShape {pieStart, pieEnd, invertPie}`) cut it as a pie (#812). With the bounding box showing, the Selection tool shows a selected ellipse's two pie widgets just outside it; dragging one sets its angle in one undo step and double-clicking one makes the ellipse whole again. A live polygon's Polygon Properties there: side count, angle, corner type and radius, radius, side length and Make Sides Equal once an uneven scale has made its sides differ (`object.setLiveShape {sides, polygonAngle, polygonRadius, sideLength, makeSidesEqual}`, part of #812); a star is a plain path, as in Illustrator. The Flare Tool Options last as the tool's options: the next flare dragged out uses them, a click's dialog shows them and double-clicking the tool opens them (part of #812).
Backtick (`` ` ``) held while a rectangle, rounded rectangle, ellipse, polygon, star or line is dragged out leaves copies of the shape being drawn along the drag, each its own object: the continuous duplicate that the Keys for drawing table of [the help page](https://help.adobe.com/archive/en_US/illustrator/cs3/illustrator_cs3_help.pdf#page=469) lists. Each copy is the shape as the drag showed it then, with its modifiers and Up/Down counts; the release keeps the copies and the last shape as one undo step, and Escape takes them all back. The spacing (a copy each time the pointer has moved 8 screen points with the key down, none for the key alone) and the limit of 128 copies a drag are VectorCraft's own values, and a shape with no width, height or length leaves no copy. The arc, spiral, grid and Flare tools do not leave copies (tests `backtick_drag_leaves_copies_of_the_rectangle_being_drawn` and, through the engine, `a_backtick_drag_leaves_copies_of_the_shape_as_one_undo_step`).
Escape while a polygon, star or rounded rectangle is dragged out cancels it and puts back the side count, point count, corner radius or star ratio its Up/Down and Ctrl/Cmd changed, so the next drag, the tool's options and General › Corner Radius start from the values before the canceled drag; a drag that is let go keeps them, and an option set with `tool.setOption` during the drag stays. This is VectorCraft's own rule.
A click with the Rounded Rectangle tool opens the size dialog with its radius at General › Corner Radius, and OK makes the radius typed there that preference, so later rounded rectangles and the dialog's next opening start from it while rounded rectangles already drawn keep their corners, as [the help page](https://help.adobe.com/archive/en_US/illustrator/cs4/illustrator_cs4_help.pdf#page=64) describes. A radius outside the preference's range of 0 to 1296 pt, which is VectorCraft's own, or one that is not a length is refused with an error: the dialog stays open, nothing is drawn and the preference keeps its value. Evidence: `dialogs::shapes::tests::{rounded_rectangle_click_dialog_opens_on_and_sets_the_corner_radius, rounded_rectangle_click_dialog_refuses_a_radius_out_of_range}`.
While a grid is dragged out, F lowers `rowSkew` (rectangular) or `radialSkew` (polar) by 10 percentage points and V raises it by 10; X lowers `columnSkew` (rectangular) or `concentricSkew` (polar) by 10 and C raises it by 10. Plain and Shift presses work; with Alt, Ctrl or Cmd held they do not, as for the other letters a tool takes while dragging. Each press changes the skew once and updates the preview; values stay within ±500% and remain in the tool options after release. The [default keyboard shortcuts](https://web.archive.org/web/20260726060015/https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html) (archived copy) list the four drag keys and a 10% change. The signs (positive values follow VectorCraft's existing skew convention, so F and X lower the stored value) and one change per press with key repeat ignored are our own rules.
While an arc is dragged out, C switches it between open and closed, F switches its base between the X and Y axes in the same box, and Up/Down raise and lower its slope by 10 within −100…100; each press switches once, and the values stay as the Arc tool's options. The [default keyboard shortcuts](https://web.archive.org/web/20260726060015/https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html) (archived copy) list C, F and Up/Down for an arc being dragged out. F as the base switch, the arrows changing the slope, the step of 10 and one switch per press are our own rules.
While a spiral is dragged out, Alt adds or removes whole winds of four segments and Ctrl/Cmd changes the decay. The spiral's inner end keeps the distance from the center it had on the first modified drag event, while the outer end follows the pointer. The [default keyboard shortcuts](https://web.archive.org/web/20260726060015/https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html) (archived copy) list Alt-drag to add or subtract winds and Ctrl-drag to change the decay rate; [Draw spirals](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/draw-spirals.html) defines four segments per full wind and Decay as the amount each wind decreases. An 80% spiral has 80% of its outer radius after four segments; newly drawn spirals with the same settings wind more broadly than in earlier VectorCraft builds. Rounding the fitted count to whole winds from the count on the first Alt-only drag event, the held inner radius, the ranges (2…1000 segments, 5…99.99 % decay), Ctrl/Cmd taking precedence when both are held, and the new values staying as Spiral tool options are our own rules. Switching back to Alt uses the current count as its new base while keeping the held inner end.
Escape while an arc, spiral or grid is dragged out cancels it and puts back the options its keys, Alt and Ctrl/Cmd changed (slope, open or closed, base axis, segments, decay, dividers and skews), so the next drag and the tool's options start from the values before the canceled drag; a drag that is let go keeps them, and an option set with `tool.setOption` during the drag stays. This is VectorCraft's own rule.
VectorCraft's own Anchors field in the Ellipse dialog (a click with the Ellipse tool; `shape.ellipse {anchors}`, part of #7840) sets how many smooth anchors the ellipse has, 4 by default; 4 draws a live ellipse, and any other count from 2 to 1000 draws a plain path with the anchors spaced evenly by angle, fitted to the typed width and height. The count last confirmed stays as the Ellipse tool's `anchors` option, and the next Ellipse dialog opens on it (`ellipse_with_four_anchors_is_the_live_ellipse`, `ellipse_anchors_draw_that_many_anchors_on_the_ellipse`, `ellipse_refuses_a_bad_anchor_count`, `the_ellipse_dialog_draws_and_keeps_its_anchor_count`).
In the Ellipse dialog, a click on the word Height copies the Width value into the Height field, so OK draws a circle of that width, as [the help page](https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf#page=140) describes for drawing ellipses. The Rectangle and Rounded Rectangle dialogs keep plain labels. VectorCraft's own rules: the word Height is a button that Space or Enter also presses, and that Enter does not press OK (nor does Enter on the Constrain Width and Height Proportions button); with the link on, the link stays on and keeps the circle when a side is typed next; a Width that is empty or not a distance, including one the field refuses as the click leaves it, leaves Height as it is; Cancel discards the copy. Evidence: `dialogs::shapes::tests::{clicking_height_in_the_ellipse_dialog_copies_width_into_height, the_ellipse_height_button_copies_width_from_the_keyboard_and_keeps_the_link_round, enter_on_the_link_button_turns_the_link_on_without_pressing_ok, only_the_ellipse_dialog_has_the_height_button, copying_width_takes_only_a_width_that_reads}`.
- **Cutting:** Eraser, Scissors, Knife, Mirror & Cut, Line Cut and Rectangle Cut (real geometry, compound paths keep their holes).
A Scissors cut (`path.split`) leaves one of the two new end points selected and the rest of the path unselected, as [Cut paths](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/modify-paths/split-paths.html) and the "Split a path" section of the [CS3 user guide](https://help.adobe.com/archive/en_US/illustrator/cs3/illustrator_cs3_help.pdf) describe: the two end points lie on top of each other, and a Direct Selection drag from them moves the selected one with its handles and no other anchor. A closed path cut once stays one open path.
The paths a Scissors cut (`path.split`) or Cut Path at Selected Anchor Points (`path.cutAtAnchors`) makes keep the source path's fill and stroke settings, and every stroke's alignment becomes Center in the same undo step, as [the help page](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/modify-paths/split-paths.html) describes. Resetting hidden stroke rows too, centering the strokes of a path's other subpaths and of the compound path a cut member belongs to are VectorCraft's own rules (`scissors_cut_paths_have_their_strokes_centered`, `cut_at_anchors_paths_have_their_strokes_centered`).
@@ -1226,6 +1291,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
With Smart Guides on, a straight Knife cut snaps to anchor points and paths: [Cut objects using the Knife and Scissors tools](https://helpx.adobe.com/illustrator/desktop/manage-objects/edit-objects/cut-objects.html) describes the Knife snapping to anchor points and paths while Smart Guides are on. Its ends snap as the ends of the Pencil's straight line do, to anchor points and path segments of art that is shown: the press, and the release of an Alt-drag. Shift+Alt steps 45° from the snapped press, and its release stays on that step. With Smart Guides off, or with Snap to Pixel or Snap to Grid on, the cut is not snapped. The dashed line and `path.knife` use the snapped points.
Eraser Tool Options has Angle and Roundness besides Size, as [Erase paths using the Eraser tool](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/modify-paths/erase-paths-using-eraser-tool.html) describes: the Eraser's tip is an ellipse Size across, its long axis at Angle and its short axis Roundness percent of the long one, and a drag with a tip that is not round shows the outline of the area it erases (`path.eraseRegion` `angle` and `roundness`).
`path.eraseRegion` refuses an Angle outside −180° to 180° and a Roundness outside 1% to 100% with an error and leaves the document unchanged; a key left out or null takes its default (0° and 100%). The help page gives no range for the two options, so the ranges are VectorCraft's own values. `path.split` refuses a `t` outside 0 to 1 in the same way.
`path.eraseSegments` (the Path Eraser) refuses a `width` outside 0.001 to 1000 pt with an error and leaves the document unchanged; left out or null, the width is 8 pt. The help page gives the Path Eraser no width option, so the range is VectorCraft's own value.
Eraser Tool Options gives Angle, Roundness and Size each a menu of Fixed, Random, Pressure, Tilt, Bearing and Rotation with a Variation field, as the same page describes: the tip varies by up to the Variation either way, Random once per drag and the others with what the pen reads at each point of the drag, and the tip outline at the pointer follows the pen while it erases. The outline of the area a drag shows takes, at each step, the tip the pen's readings give halfway along it, with a Random value shown as the value itself, and a mouse drag erases at the set values (`path.eraseRegion` `angleMode`, `roundnessMode`, `sizeMode` and their variations).
The outline a Blob Brush or Eraser drag shows is built a bounded amount per frame, so a long stroke does not slow the canvas: each frame takes at most 256 new points of the drag and outlines again only the pieces of up to 32 segments they change, and the parts of a piece's outline inside the rest of the area are removed a limited amount at a time. While work is left, the canvas draws again with the pointer still, the points not outlined yet show as a thin line, and the tip shows at the pointer. When the tip varies with the pen (Size set to Pressure, or an Eraser mode that follows the pen), each step is its own piece and the outline also shows only the edge of the whole area. The release sends the whole stroke as before (`path.blob`, `path.eraseRegion`).
The settled part of that outline is kept in paths of up to 64 pieces each. A path is shared from one frame to the next until a piece in it changes, and the canvas keeps the triangles it drew the path with while the view stays the same, so a frame does not copy, flatten or tessellate a settled path again; a pan, zoom or rotation draws each one once more. This is VectorCraft's own rule. The line that a drag of more than 64 segments shows with a round Eraser tip, the Knife, the Path Eraser or the Pencil with Live preview off is kept the same way, in pieces of 64 segments: a frame builds again only the last piece, and the Knife's dashes run on from one piece to the next. With the Eraser's Size set to a mode that follows the pen, each step of such a drag is kept as its own path and a frame builds only a new step. A smoothing drag's band is kept until it changes. The canvas still copies the kept triangles of every piece into each frame.
@@ -1235,6 +1301,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
Transform Each opens on the scale, move, rotate, reflect, Random, reference point, Transform Objects and Preview it was last confirmed with (kept with the UI state; Copy never is), and its Copy button, left of Cancel, transforms a copy of each object as the [Scale multiple objects](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/scale-multiple-objects.html) help page has it; the Copy checkbox is gone (#1732; the remembered values follow a maintainer comment on the issue, not the help page). Its Scale section has the Relative and Absolute radio buttons the same page describes: percentages of each object's size, or the width and height it becomes (`object.transformEach` `relative`, which Transform Again repeats); Absolute measures each object's own box, and the scales act along its axes about that box's reference point, so a turned shape keeps its shape and objects of different sizes come out alike; the fields show the width and height the selected objects share and read "Mixed" when they differ or a side is 0 (a line's), each object measured by its own box, rotated with it, as the Transform panel and the Control bar show it (sizes they show alike count as the same), and a size typed into them sets every object to it (a side left Mixed keeps its size), our choices where the page leaves them open; a live Repeat scales its spacing by the geometric mean of the two factors, so its Absolute size is approximate. The link beside the two scales keeps them in proportion, as the shape dialogs' Width and Height link does (`__constrain`, kept with the dialog's values; where it sits is our choice, the public pages don't establish it). The panel lists Scale, Move and Rotate, then the Options in two columns (Transform Objects, Transform Patterns, Scale Strokes & Effects, Scale Corners; Reflect X, Reflect Y, Random), the Reference Point, and Preview at the left of the button row, level with Copy, Cancel and OK.
Transform Again uses the Copy, Transform Patterns, Scale Strokes & Effects and Scale Corners choices of the transform it repeats; after a bounding-box handle drag on area type, it resizes the type area again and the type keeps its size (`object.transformAgain`). With anchors selected with Direct Selection, Move, Rotate, Scale, Reflect, Shear and Transform Again (the commands, their dialogs and the four tools' drags) transform only those anchors, their handles with them, about the centre of the box around them unless a point was clicked; a copy still copies the whole object (#1408; behaviour reference: [adjust path segments](https://helpx.adobe.com/illustrator/using/adjust-path-segments.html); the default reference point and the copy are our choices). The Move, Rotate, Scale, Reflect and Shear dialogs have a Preview checkbox, off when they open: while it is on the canvas follows the values, Cancel rolls it back and OK is still one undo step; Up/Down step the Rotate and Shear angles and the Scale percentages by 1, Shift by 10 (#1412). The five dialogs and Transform Each have Transform Objects beside Transform Patterns: off, the art stays and only its pattern tiles transform (`objects` on the transform commands), and Transform Again repeats the choice (#1448; behaviour reference: [scale objects](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/scale-objects.html); the checkboxes are always enabled and the Scale page's pair is applied to all of them, our choices). Reflect's axis is Horizontal, Vertical or an angle (#1460; [reflect objects along an axis](https://helpx.adobe.com/illustrator/desktop/manage-objects/arrange-objects/reflect-objects-along-an-axis.html)).
- **Pen:** Alt pressed in the middle of dragging out an anchor splits its handles and keeps the curve already shaped into it (only the outgoing handle follows the pointer); Space held while dragging out an anchor moves it, handles and all. A press on the first anchor of the path being drawn closes it whatever the drag then does: the drag shapes the closing curve and the release closes the path wherever it ends (#501). The first anchor's incoming handle mirrors the pointer, and a click leaves it retracted and the anchor a corner. Its outgoing handle stays where it is on a corner, so the first segment keeps its shape, and on a smooth anchor it turns to stay in line at its own length; Alt makes the anchor a corner and leaves the outgoing handle where it was when Alt went down. The Smart Pen's closing drag does the same (fixes #6634; `path.close`'s `in` and `out`; behavior reference: [draw with the Pen, Curvature, or Pencil tool](https://web.archive.org/web/20220614224656/https://helpx.adobe.com/illustrator/using/drawing-pen-curvature-or-pencil.html), where a click or drag on the first anchor closes the path and Alt breaks the pairing of the closing anchor's handles; which handles the drag sets are our choices). Space held during the Pen's closing drag moves the first anchor, handles and all, as that page also describes (`path.close`'s `at`). Clicking the last anchor of the path being drawn retracts its outgoing handle (convert cursor), and dragging from it pulls out a new one on its own. Auto Add/Delete: over a selected path, a click on a segment adds an anchor and a click on an anchor deletes it (add and delete cursors); Shift held, or Preferences › General › Disable Auto Add/Delete, starts a new path instead. Alt held over a handle end or an anchor of a selected path (the one being drawn too) works as the Anchor Point tool, with its convert cursor: dragging a handle moves it alone, clicking a smooth anchor makes it a corner, dragging an anchor pulls out new symmetric handles, dragging a segment reshapes it; drawing then goes on. Cmd (Ctrl) held drags with the selection tool chosen last, Direct Selection until one is (handles, anchors and segments of the path being drawn or another), and the Pen then goes on drawing its path while that stays selected; the pointer shows that tool's while Cmd is held. The same holds for agents (`pointer_gesture` with `mods.cmd`), as the borrowing now lives in the engine (#494). A drag's preview (the Pen's, the Anchor Point tool's, Direct Selection's handles and anchors) follows every position the pointer is seen at (#834): the canvas sends the tool a drag whenever the pointer's document position differs from the last one it sent, not only when egui's frame delta is non-zero (zero when a compositor coalesces motion and in the frame the pointer comes back into the window after leaving it), and a move that arrives in the release's own frame shapes the preview before the release commits it, once the press has dragged. With the Pen, a press that moves under 3 screen pixels is a click (a corner without handles), and a Precise Cursors command toggles the existing preference and can take a shortcut (#1663).
Choosing the Pen again while it draws a path (P, a click on its button, `tool.select`) ends the path as Escape does: the path stays open and selected (a path inside a compound path leaves the compound path selected), the Pen stays chosen, and the next click starts a new path. The [help page](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/preview-paths-drawn.html) describes P doing this with the preview off; doing it with Rubber Band on and for the button and `tool.select` are VectorCraft's own rules.
- **Direct Selection (#1278):** clicking a segment picks its connection, with hollow endpoint anchors and only that curve's direction handles. Delete leaves the neighboring curves and appearance intact, opens/splits contours in one undo step, and another Delete removes the remaining selected path. A whole-path drag and deliberate anchor selection keep their existing behavior; egui frames and native control/art checked, OS mouse/visual QA pending. Where anchors of overlapping objects coincide, a click or drag takes the anchor of the selected object, also when another object lies over it (#1509, fixes #1508). Delete removes every selected anchor of a closed path (it used to remove the wrong ones), removes objects selected whole along with the selected anchors of others, and keeps the remainder selected so a second Delete removes it (#1674). In isolation mode Direct Selection and Group Selection pick only inside the isolated object (#1666). Escape cancels a Direct Selection drag (#1803, #1743). Double-clicking type (including type nested inside a group) switches to the Type tool and puts the caret at the clicked character.
With Direct Selection and Group Selection, a drag that starts on an object while the selection also holds direct-selected anchors or segments moves those anchors and the objects selected whole in one undo step (`path.moveAnchors`), as a drag of a selected anchor does, and the other anchors of a partly selected path stay in place. While Alt is held during the drag, it copies the selected objects instead (`object.transform`). When direct-selected anchors are moved or transformed together with objects selected whole (such a drag, an anchor drag, an arrow key, or Move, Rotate, Scale, Reflect and Shear without a copy), a path inside a selected group is transformed once, with the group.
A path segment with a control point whose x or y is infinite or larger in size than `f64::MAX / 16` is measured by its control points, so its bounds hold the whole curve and the canvas check refuses an edit that leaves such a path selected (`path.create` included).
@@ -1256,6 +1323,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **Live Corners:** drag a live rectangle's corner widgets (Selection or Direct Selection) to round all corners, with a radius readout; with Direct Selection, select corner anchors to show and round just those corners (#381). Each corner keeps its own radius and kind (Round, Inverted Round, Chamfer): Alt-click a widget to cycle the kind, double-click it for the Corners dialog, and the Properties and Transform radius fields set the selected corners (`object.setLiveShape {corners, radius, kind}`). A link toggle behind Corner Radius (the `singleCornerRadius` preference) switches the panels to a field for each corner of a live rectangle: Top Left, Top Right, Bottom Right and Bottom Left. Corners stay circular when the rectangle is scaled unevenly or along its own sides when rotated (the radius keeps its size, or scales by the mean scale with Scale Corners on); only a shear distorts them. On a rectangle that isn't square every corner is the same circle: a radius past half the shorter side stops there for all of them, the widgets sit on the corners as drawn and turn the edited corners red at that limit, CSS export writes the drawn radii, and rectangles saved stretched by older versions get circular corners when their corners are next set (#442). Live Corners work on any path's corners too, as on a rectangle's (#511): a star's, a live polygon's (which also shows them to the Selection tool, has a Corner Radius field in the Properties and Transform panels and keeps its radius as its sides change) and a pen path's, wherever two sides meet at an angle at an anchor that isn't smooth: curved sides too, trimmed to what the cut leaves of them (#1144). Direct Selection shows the widgets of every corner, or of the corners holding selected anchors; each corner is a circle tangent to both sides, drawn no larger than takes its cut halfway along its shorter side; a path keeps its uncut outline so its corners stay editable, and the same command, dialog, angle preference and View › Hide Corner Widget apply. With Direct Selection a click on a widget (no drag) selects its corner, as a click on the corner's anchor does, so the next drag on it rounds that corner alone; Shift-click toggles it (#1239). While a corner widget is dragged with the Selection tool the bounding box hides, so the rounding shows against the path alone (#1229). A round corner next to a curved side curves smoothly instead of sticking out of the shape (#1547, fixes #1512).
View › Hide Edges hides the Live Corners widgets, the bounding box and the type widget, and the selection tools then do not answer a press on them or change the cursor over them.
- **Blend spine Anchor Point tool (#2544):** on a selected blend, dragging a spine corner makes symmetric Smooth handles; the tool displays and picks existing spine handles when switched to, drags one independently or retracts it on click, and clicking a point with handles retracts both. The spine is edited live without moving its key objects. Windows native canvas checks and screenshots reviewed: symmetric and independent handles, corner/retraction, Shift constraints and perpendicular reshaping, tool switching, key preservation, Undo/Redo, save/reopen, hidden handles and overlapping Path/Blend priority (PR #2643). Behaviour reference: [public path-editing documentation](https://helpx.adobe.com/illustrator/using/adjust-path-segments.html).
- **Blend spine points by marquee:** with Direct Selection, a marquee picks the spine points inside it on a selected blend, the topmost one when several are selected, and the picked points drag together as Shift-clicked ones do; Shift-marquee adds points or takes picked ones away, a plain marquee around none of them drops the picks, and Escape during the marquee keeps them. Unselected, locked and hidden blends are skipped. The spine's points are anchor points edited with Direct Selection ([the help page](https://helpx.adobe.com/illustrator/desktop/manage-colors/apply-transparency-and-blending/modify-spine-of-blended-objects.html)), and a boundary drag with the tool selects anchor points ([the help page](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/modify-paths/select-anchor-points-in-paths.html)); the rules for selected, topmost and Shift are VectorCraft's own (`crates/tools/src/direct/tests.rs`, `marquee_picks_selected_blend_spine_points_which_drag_together`, `shift_marquee_toggles_selected_blend_spine_points`, `marquee_skips_unselected_locked_and_hidden_blend_spines`, `escape_cancels_a_marquee_and_keeps_the_picked_spine_points`).
- **Blend steps of brushed strokes:** the steps interpolate the pen pressure, tilt, bearing and rotation recorded with the Paintbrush, so a Calligraphic, Scatter or Art brush that varies with the pen changes gradually from one key to the next. A key without a recording counts as half pressure, half tilt and 0°, as brushes read it, and angles turn the shorter way round. When the blend starts a key's path at another anchor (an open path run from its end, a closed one turned to another start), the key's recordings, width profile, arrowheads, dashes and a gradient along or across the stroke turn with the path. Different brushes still switch halfway (VectorCraft's own rule; strokes blend their options, as [Blended objects overview](https://helpx.adobe.com/illustrator/desktop/manage-colors/apply-transparency-and-blending/blended-objects-overview.html) describes; `crates/doc/src/blend.rs`, `pen_pressure_tilt_and_angles_interpolate_for_brushes`, `stroke_profiles_turn_with_a_key_path_started_elsewhere`, `stroke_gradients_and_dashes_turn_with_a_key_path_started_elsewhere`).
- **Blend steps of spot gradients with process plates:** when the matching stops of two gradients, or of a gradient and a solid, are tints of one spot swatch, each step's stop stays linked to it at a tint between the two and keeps the process inks printed with it, each of C, M, Y and K between the two stops' amounts; a stop or solid without process inks counts as none of each. Gradients with different stop counts keep the inks at every resampled stop. PDF export writes such a step as one DeviceN shading of the spot and process inks. Tints of one spot color blend into tints of it, as [the help page](https://helpx.adobe.com/illustrator/desktop/manage-colors/apply-transparency-and-blending/blended-objects-overview.html) describes; the process-ink interpolation is VectorCraft's own rule (`crates/doc/src/blend.rs`, `blend_gradient_spot_process_plates_interpolate`, `resampled_gradient_spot_process_plates_interpolate`, `blend_gradient_missing_plates_mean_zero`, `blend_solid_to_spot_gradient_does_not_copy_plates`; `crates/pdf/src/tests/output.rs`, `blend_steps_between_spot_gradients_with_process_plates_print_both_inks`).
- **Path editing (#494):** the handles shown are the handles that drag: Direct Selection drags those of a path selected as a whole (as the Pen leaves it), the Anchor Point tool and Pen+Alt no longer grab handles that Show handles when multiple anchors are selected hides, a handle shorter than the tolerance leaves its anchor to be picked, and the anchor tools pick within Selection & Anchor Display › Tolerance. A dragged segment keeps a smooth anchor at either end smooth. With Direct Selection, the Pen, the Curvature and the anchor tools, a path selected as a whole shows all its anchors selected, and the Control bar and the Properties panel offer Convert (corner, smooth) for them too; Remove and Cut wait for anchors direct-selected (#504). A handle drag gathers its snap targets once per drag (it took 21 ms per pointer move on a 20,000-path document, now 1 ms; `vectorcraft-cli perf` measures handle and segment drags on a 5,000-anchor path). Join merges the selected anchor points that lie on one another, as after Average, into one anchor (#1582, fixes #1533), and removes the merged anchors in one pass over the path, so a long run of them no longer moves the anchors after it once per merge (`cmd::path::tests::a_long_run_before_many_other_anchors_merges_in_one_pass`); Object › Path › Average & Join… (`path.averageJoin`, Cmd+Alt+Shift+J, the "Create corner or smooth join" shortcut of [Default keyboard shortcuts](https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html)) moves two open path ends to their midpoint and joins them there, a corner or smooth point as its dialog's Points choice asks, in one undo step.
@@ -1291,6 +1359,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **Tool double-clicks:** double-clicking a tool's button opens its options: Hand fits the artboard in the window, Zoom shows 100 %, Rotate, Scale, Reflect and Shear open their Object › Transform dialogs, the Selection, Direct Selection and Group Selection tools the Move dialog (Enter opens these seven tools' dialogs too; Move opens on the offset of the last drag or Move and with the checkboxes it was last confirmed with, so Enter, Enter repeats a move or a copy at the same spacing, as [an Adobe Community thread](https://community.adobe.com/questions-652/move-tool-771221) describes), Gradient, Eyedropper, Blend and the Liquify tools their panels or options, the Pencil, Paintbrush, Smooth, Blob Brush and Eraser tools their Tool Options (Fidelity, fill, Keep selected, the tolerances, the brush size), and (#812) the Flare tool its Flare Tool Options, the Artboard tool the active artboard's Artboard Options, the graph tools Graph Type for the selected graph, the Symbolism tools the Symbolism Tools Options (Diameter, Intensity, Symbol Set Density) and the Magic Wand tool its panel.
Double-clicking the Line Segment, Arc, Rectangular Grid or Polar Grid tool opens its Tool Options, as step 3 of the [Rectangular Grid tool](https://helpx.adobe.com/illustrator/using/tool-techniques/rectangular-grid-tool.html) and [Arc tool](https://helpx.adobe.com/illustrator/using/tool-techniques/arc-tool.html) pages and the [Tools](https://helpx.adobe.com/illustrator/using/tools.html) page describe (#2691): the dialog a click with the tool opens, without a place to draw. Line Segment Tool Options has Length, Angle and Fill Line (a new line takes the current fill, `shape.line` `fill`); Arc Segment Tool Options its lengths, Reference Point, Type, Base Along, Slope and Fill Arc; the grids' Tool Options the Reference Point, Default Size, dividers, skews and switches. OK draws nothing: the next drag draws with the options and a click's dialog opens at them, the Length, Angle and Default Size included; Cancel changes nothing. Tests: `toolbar::tests::double_clicking_the_line_arc_and_grid_tools_opens_their_tool_options`, `line_segment_options_and_fill_line`, `grid_default_size_is_an_option_the_drag_leaves_out`, `fill_line_gives_a_new_line_the_current_fill`.
A closed arc from Arc Segment Tool Options or `shape.arc` with `lengthX` and `lengthY` closes through the corner of its box across from the one a convex arc bulges toward, with either Base Along, so a closed arc at Slope 100 is a quarter-ellipse sector and the Y Axis arc is the X Axis arc mirrored top to bottom. The [Draw arcs](https://web.archive.org/web/20251025042220/https://helpx.adobe.com/illustrator/using/drawing-simple-lines-shapes.html) section's Type option chooses whether the arc is open or closed; the corner it closes through is VectorCraft's own rule. Tests: `shapes::tests::a_y_base_arc_is_the_x_base_arc_mirrored_top_to_bottom`, `a_closed_convex_arc_is_a_quarter_ellipse_sector_with_either_base`, `tests::draw2::shape_arc_closed_along_y_closes_through_the_top_left_corner`.
Arc Segment Tool Options, opened by a double-click on the Arc tool, shows a picture of the arc below Fill Arc that is redrawn as its fields change, `ui.dialog.set` included. The help page (<https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf#page=135>) says this dialog previews the arc while its options are set. The picture is VectorCraft's own: 160 × 120 points on white, the arc that `shape.arc` would draw with the same values fitted inside with its proportions kept, in the current stroke (black when there is none), filled with the current fill when Fill Arc is on, turned by General › Constrain Angle, with a mark on the reference point; a gradient or pattern stroke or fill shows as gray. A value the Arc tool does not keep as typed, such as a slope outside −100…100, shows as the value OK sets. The dialog a click with the tool opens has no picture. OK still only sets the options, and neither OK nor the picture draws on the canvas or adds an undo step. Tests: `dialogs::shapes::tests::the_arc_preview_is_the_arc_shape_arc_draws`, `the_arc_preview_follows_the_fields_and_fits_its_frame`, `the_arc_preview_shows_the_options_ok_sets`, `arc_tool_options_show_a_preview_and_ok_draws_nothing`. Scores and hours unchanged.
Live curve fitting in the Pencil Tool Options is on by default; while it is off, the path shown while a stroke is drawn joins the stroke's points with straight segments, and the release fits the curve, as [Pencil Tool Options](https://web.archive.org/web/20261002104400/https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/pencil-tool-options.html) describes (`path.freehand` `fit`).
In the Pencil and Paintbrush Tool Options, Edit selected paths within 0 px turns editing off, so a stroke that starts exactly on an end of a selected open path draws a new path; Close paths when ends are within 0 px turns closing off, so a stroke that ends exactly where it started stays open.
The Pencil's and the Paintbrush's Fidelity is in screen pixels, the same at any zoom: their Tool Options give it in px, from 0.01 px on the logarithmic slider to 20 px and up to 100 px in the field, and the tool sends `path.freehand` the value in points at the current zoom (#5729). The Smooth tool's and the Blob Brush's Fidelity stays in points.
@@ -1312,12 +1381,14 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
As VectorCraft's own rule, OK in Shape Builder Tool Options gives an error for a highlight Color with an alpha part (`#rrggbbaa` or `#rgba`) and changes nothing. Regression test: `dialogs::shape_builder_options::tests::a_highlight_color_with_an_alpha_part_is_refused`.
With Pick Color From Artwork, a merged shape takes the appearance, opacity and blending mode of the object where the drag starts, else of the object where it ends, else of the front-most selected object, as the [Shape Builder combine page](https://web.archive.org/web/20251006211643/https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/combine-shapes-with-shape-builder-tool.html) describes. A click in an area that no selected object covers, such as a hole other shapes enclose, takes the front-most selected object's look (`shapeBuilder.merge` `points`: the first point is where the drag starts, and the last point is where it ends).
A Shift-drag with the Shape Builder tool draws a rectangular marquee for merging many paths at once, as [Combine shapes with the Shape Builder tool](https://web.archive.org/web/20251006211643/https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/combine-shapes-with-shape-builder-tool.html) describes: the regions it reaches are shaded while it is drawn and merge into one shape on release, or with Alt they are deleted. The marquee reaches each region whose outline crosses it or has an anchor inside it, and the region that holds the whole marquee; this rule is VectorCraft's own. For Pick Color From Artwork, the marquee's starting corner is where the drag starts and the opposite corner is where it ends (`shapeBuilder.merge` `rect`).
The Shape Builder works on the selected paths, as [Combine shapes with the Shape Builder tool](https://web.archive.org/web/20251006211643/https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/combine-shapes-with-shape-builder-tool.html) describes. As VectorCraft's own rule, a click or drag that builds nothing says why in the status bar when it is released: "Shape Builder: select paths or compound paths" when nothing is selected or the selection holds no unlocked, visible path; "Shape Builder: select all paths you want to merge" when the release is over a path or compound path that is not selected; and "Shape Builder: no region under the pointer" otherwise. The document, the selection and the undo history stay as they were, and the next gesture that builds something clears the message. Regression tests: `shape_builder_with_nothing_selected_says_what_to_select`, `shape_builder_names_the_unselected_path_under_a_release_that_built_nothing` and `shape_builder_replayed_gesture_over_nothing_gives_its_status_once` in `builder/tests.rs`, and `tests::build::shape_builder_click_that_builds_nothing_shows_why`.
Shape Builder pieces on dense hatches (lines at exact 0.25 or 0.5 pt steps across another line) come back one per stretch between crossings, with no speck where the sweep cut a line's two passes a rounding error apart: the planar map contracts the stub between such cuts into one vertex, bounded by each cluster's extent so a run of tiny level segments keeps its length (`crates/pathops/src/planar.rs` tests `a_dense_hatch_at_exact_binary_steps_cuts_each_line_once_per_crossing`, `a_run_of_tiny_level_segments_is_not_contracted_as_stubs`, `a_line_crossed_where_its_two_passes_part_is_cut_once`).
The planar map's edge-source grid stays linear in memory on any input: a segment is filed once per cell it crosses, and the grid holds at most a budget of cell references (a few dozen per item plus a few rows' worth), past which the remaining items go to a short scanned list and are still found, so thousands of coincident segments cannot make the index quadratic (`crates/pathops/src/planar.rs` test `rect_index_holds_a_bounded_number_of_references`).
The Blob Brush Tool Options have Keep selected and Merge only with selection, both off by default: while Keep selected is off, the blob a stroke draws or merges into is not selected afterwards, and while Merge only with selection is on, a stroke merges only with selected blobs of its color that it touches (`path.blob` `keepSelected` and `mergeOnlySelection`).
The Blob Brush Tool Options also have Angle and Roundness, as the reference app's [Blob Brush options](https://web.archive.org/web/20261012042029/https://helpx.adobe.com/illustrator/desktop/paint-and-fill/learn-painting-basics/blob-brush-options-and-best-practices.html) list them: Angle from −180° to 180° (0° by default) and Roundness from 0% to 100% (100%, a round tip, by default). The elliptical tip keeps its angle on the page along a stroke, a 0% tip is drawn 0.1% as wide as it is long, and the dialog shows the tip and three dabs of it. The values are kept with the tool's options (`path.blob` `angle` and `roundness`). Not done: the Random and pen-driven variations of Angle and Roundness.
The Blob Brush Tool Options' tip preview is the Angle slider for screen readers, with the Angle in degrees as its value: a click or a drag in it points the Angle at the pointer and gives it the keyboard focus, Tab reaches it after the Roundness field, and the arrow keys step the Angle by 1° (10° with Shift, Home and End to −180° and 180°).
The Blob Brush Tool Options also have Fidelity, which the reference app's [Blob Brush options](https://web.archive.org/web/20261012042029/https://helpx.adobe.com/illustrator/desktop/paint-and-fill/learn-painting-basics/blob-brush-options-and-best-practices.html) list as setting how far the pointer moves before the path gets a new anchor point. The range and default are VectorCraft's own values: the Pencil's logarithmic slider from Accurate (0.01 pt) to Smooth (20 pt) and its field (up to 100 pt), 1.5 pt by default and kept with the tool's options. The brush follows the stroke fitted at the Fidelity, as a Pencil stroke is fitted: a low value follows the drag closely, jitter included, and a higher one gives smoother curves (`path.blob` `fidelity`).
`path.blob` rejects an Angle outside −180° to 180°, a Roundness outside 0% to 100% and a Fidelity outside 0.01 to 100 pt with an error and leaves the document unchanged; a key left out or null takes its default (0°, 100% and no fitting).
A Blob Brush stroke merges with the topmost path of its fill color and no stroke that it touches, and with the other such paths it touches in the same group or layer that are next to that path in stacking order with no other kind of object between them; matching paths in other groups or layers are left alone, as the Blob Brush tool guidelines in [Paint with fills and strokes](https://web.archive.org/web/20241219085603/https://helpx.adobe.com/illustrator/using/painting-fills-strokes.html) describe (`path.blob`).
- **Ruler guides as layer objects:** a guide goes on the current layer, shows, hides, locks and is deleted with it, is listed in the Layers panel (its row selects it) and moves to another layer (`guide.setLayer`, or its row dragged onto that layer's rows); guides on a hidden or locked layer can't be selected, moved or deleted, Duplicate copies a layer's guides and Merge Selected and Flatten Artwork keep them on the merged layer; guides from files saved before guides had layers go on the top visible, unlocked layer when the document opens. A guide's row has its own eye and lock, which hide or lock that guide alone in one undo step and take part in a drag down either column ([help page](https://helpx.adobe.com/in_hi/tutorial-builder/user-guide/illustrator-tutorial-builder/-ai--examples-of-common-coach-marks.html) lists a Guide among the Layers panel's items); a hidden guide is not drawn and does not snap, a locked one is drawn and snaps but can't be selected, moved or deleted, and its own state is kept through save and reopen and while its layer is hidden or locked (`layer.setProps` on its `guide.list` id). Object › Lock › Selection and Object › Hide › Selection lock or hide a selected guide with the selected art, and Unlock All and Show All unlock or show such guides and select them ([help page](https://help.adobe.com/archive/en_US/illustrator/cs3/illustrator_cs3_help.pdf) for Lock and Hide Selection). A guide row dropped on the panel's trash deletes its guide, the trash deletes a guide its row selected, and after a click on a guide row Delete deletes the guide rather than the rows highlighted before ([help page](https://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/align-graphic-objects-with-guides.html) for deleting a selected guide). A plain click on another row lets go of a guide its row selected, keeping the selected art, as a plain click on a row picks that row alone; a Ctrl/Cmd or Shift click keeps it (#7340, `panels::layers` test `a_plain_row_click_lets_go_of_the_selected_guide`). Not done: guides stacked among the art of their layer (they are listed above it). Lock Guides also locks the objects made into guides: they can't be selected, moved or deleted (#1543); they are drawn in the guide colour and style of Preferences, and a dragged selection snaps to ruler guides with Smart Guides on (#1583, fixes #1534). Preferences › Guides & Grid › Lock Guides by Default locks guides when the app starts; it is off by default, and new guides can still be dragged out of a ruler while guides are locked. The Transform panel shows a selected ruler guide's X or Y, and typing a value moves it (#1659, part of #1597). This is not established by the documentation we could find: the public help pages on guides, rulers and the Transform, Control and Properties panels (read again on 2026-10-14) describe selecting and dragging unlocked guides and the panels' X and Y for a selection, not a guide's position in a panel, and the one public statement of it is a user's [community answer](https://community.adobe.com/questions-652/adding-a-new-custom-guide-785586), which is not documentation. It is kept as a convenience pending the owner's decision, with no parity claim and nothing counted towards a score.
- **Releasing ruler guides:** View › Guides › Release Guides turns the selected ruler guides into paths with no fill or stroke. An artboard guide becomes a line across its artboard, and a canvas guide becomes a line across the artboards (`view.guides.release {index?, ids?}`). A Cmd/Ctrl+Shift double-click with the Selection, Direct Selection or Group Selection tool releases the ruler guide or guide path under the pointer.
@@ -1325,6 +1396,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
With Paste Remembers Layers on, art copied from a sublayer pastes back into that sublayer, as [the help page](https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=223) describes art going back to the layer it was copied from: in the same document while the sublayer is still there, two sublayers of the same name in different layers kept apart; in another document by the names of the sublayer and the layers around it. These rules are VectorCraft's own: a missing sublayer is made inside its layer (a missing layer on top, with the sublayer inside it), in the paste's one undo step; of layers with the same names, the topmost chain that matches the most names wins, a shown and unlocked one first; a matched layer that is hidden or locked, or inside one that is, refuses the paste, and nothing is pasted.
The Filter button at the right of Search All keeps the rows that are of an object kind ticked under By Object (paths, shapes, text, images, effects, groups, linked files, guides) and in a state ticked under By Layer (locked, hidden), with the rows that hold them; a section with nothing ticked takes every row. The filter combines with the search, the button is lit while a filter is on, and Clear All in its popup turns the filter off (`ui.layersFilter`). The filter lasts the session.
The panel menu's Save Selection submenu has Save Selection…, Update Selection and Edit Selection…, enabled and run as in the Select menu, and lists the document's saved selections: choosing one selects its objects again (`select.recall`).
Objects dragged onto an Intertwine group's row, or beside one of its members' rows, become members of the group, as [the help page](https://helpx.adobe.com/illustrator/using/intertwine-objects.html) describes adding objects to the group later; Alt-drag adds copies, in one undo step either way (`layer.move`, `node.move`). An object that is or holds an Intertwine group, a Repeat, a graph or a Live Paint group gets no inside box on the group's row and no line beside a member's row, and is refused with the reason, as Make refuses it, and the document is left as it was. As VectorCraft's own rules, a new member has no arranged areas and is drawn in its row's order, the other members keep theirs, a member dragged or sent to the current layer out of the group drops its areas, and a group left with one member is replaced by that member, or becomes a plain group of it when the group has an opacity, blending, appearance, mask, lock or hidden state of its own. Tests: `layer_move_*`, `node_move_and_send_to_current_layer_clean_up_membership` (`crates/engine/src/tests/intertwine.rs`), `panels::layers::tests::dragging_a_row_into_an_intertwine_adds_a_member`.
Deleting rows from the Layers panel (the trash button, rows dragged onto it, the panel menu's Delete Selection, and Delete or Backspace on highlighted rows) asks "Delete this layer and its artwork?" when a layer or sublayer among them holds art, hidden, locked and nested art included, and "Delete the selected items and their artwork?" when several rows are deleted; OK deletes the rows it asked about in one undo step, and Cancel keeps them (`ui.layerDelete`). The help page's shortcut list names the Layers panel as the place where deleting asks for confirmation ([Default keyboard shortcuts](https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html)). An empty layer, a layer with only guides, and groups or objects alone are deleted without a question, and `layer.delete` itself does not ask (`panels::layers` tests `deleting_a_layer_that_holds_art_asks_first`, `delete_selection_asks_only_for_layers_with_art`).
The Command Palette lists Window › Layers › Delete Selection once, as the Layers panel's `ui.layerDelete`, so a pick asks the same question; it does not list `layer.delete`, which scripts run without a question. New Brush…, Brush Options…, Symbol Options…, Import SVG Filter… and Convert to Text are also listed once each, as the UI command that opens the dialog or file chooser (`palette` tests `a_wrapped_engine_command_is_listed_once_as_its_ui_command`, `a_pick_of_delete_selection_asks_before_deleting_a_layer_with_art`).
No two Command Palette results for different commands, tools or plug-ins show the same name, in English or in any language with a complete menu catalog. Results that would share a name show the panel, menu or command they belong to (Export › Continue in Background and Open › Continue in Background, View › Rulers › Show Rulers and View › Perspective Grid › Show Rulers, Layers › Panel Options… and Navigator › Panel Options…, Tools › Knife and Path › Knife); results that still share one show their id after it (Ellipse (shape.ellipse) and Ellipse (addon.shapes.ellipse)), as two filter plug-ins with one name do. A query still finds a result by its name without the added path. Batch…, Flattener Preview and the four Other Library… commands are listed once each as their UI command, and Place… and Print… once each (`palette` tests `different_results_show_different_names`, `results_that_share_a_name_show_where_they_belong`, `filter_plugins_with_one_name_show_their_ids`, `each_id_is_one_result`, `a_pick_of_a_renamed_result_runs_its_own_command`).
@@ -1357,6 +1429,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **Artboard click-to-fit (#1227):** a plain click fits the topmost editable object or group to a new artboard, including its stroke like Fit to Selected Art, and makes the new artboard active. Art and its selection stay unchanged; creation is one undo step. Handles, modified clicks, drags, Escape and tool changes retain their meaning. Tested inside an artboard and on the pasteboard (`crates/engine/tests/it/artboard_click.rs`); the public [CS6 Printing Guide](https://helpx.adobe.com/content/dam/help/en/indesign/pdf/CS6_PrintGuide.pdf) documents the object-click gesture. This legacy gesture adds evidence without regrading the 2026 canvas controls.
- **Rotated views:** with the view rotated, Fit Artboard in Window, Fit All in Window and the status bar's artboard navigator fit the artboard or the art as the view turns it, and a Zoom tool marquee (Animated Zoom or GPU Performance off) zooms to the area dragged across. Ruler guides on no artboard turn with the view. The canvas draws the selection marquee where the tools select, Show Hidden Characters draws the marks of type partly inside the canvas, the Contextual Task Bar stays under the selection, and the Navigator's red box outlines what the window shows.
- **Navigator panel options:** the Navigator panel menu's Panel Options… sets the color the view box is drawn in, from a preset list (VectorCraft's own: Light Red, the default, then the layer colors) or a custom color, and Draw Dashed Lines as Solid Lines, off by default, which draws dashed strokes without their dashes in the panel's thumbnail only (`ui.navigatorPanelOptions`; kept with the UI state; behavior reference: [View artwork](https://helpx.adobe.com/illustrator/using/viewing-artwork.html)).
- **Navigator View Artboard Contents Only:** the Navigator panel menu's View Artboard Contents Only is on by default, and the thumbnail then shows only the art inside the artboards, with art on the pasteboard and in the gaps between artboards left out; turning it off shows the art outside the artboards too (`ui.navigatorPanelOptions {viewArtboardContentsOnly}`; kept with the UI state, read as on when it was never saved; the fit to the artboards' union and the cut at each artboard's edge are VectorCraft's own rules; behavior references: [Navigate and zoom artwork](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/navigate-and-zoom-artwork.html), [View artwork](https://helpx.adobe.com/illustrator/using/viewing-artwork.html)).
- **Views:** the status bar's artboard navigator (first, previous, next, last; `view.goToArtboard`) goes to an artboard, fits it and synchronizes the Artboard tool selection when that tool is active; ordinary object selection is preserved. Its four buttons are also commands of their own (`view.firstArtboard`, `view.previousArtboard`, `view.nextArtboard`, `view.lastArtboard`), listed in Edit › Keyboard Shortcuts without a default key, so a user can give them keys such as Page Up and Page Down (#5218). Actual Next-button regressions cover keyboard/Properties deletion and Undo in `chrome.rs`. Fit Artboard in Window and Actual Size show the navigator's artboard. The Artboards panel highlights that active artboard: clicking a row makes it active (the Artboard tool's too, while it is chosen) as does clicking an artboard with the Artboard tool, double-clicking its number also fits it in the window and double-clicking its name renames it. Duplicate Artboards, or a row dragged onto New Artboard, copies the artboard with its art (#446). Escape leaves Presentation Mode, `view.screenMode` from it goes back to Normal Screen Mode, and the screen mode isn't saved with the preferences: the app always starts in Normal Screen Mode with its menus and panels (#472). View › Pixel Preview shows the art as the document pixels it rasterizes to, one per point and hard-edged when magnified, turning with a rotated view (it used to draw the smooth vectors, with only the pixel grid over them). In Outline view a template layer keeps drawing in Preview, dimmed, so a picture placed to be traced stays visible under the outlines (#1505, fixes #1486). Outline view draws on a white canvas in every interface brightness and Canvas Color, pasteboard included, with the artboards as their edges and no paper (VectorCraft's own rule), so the black outlines of art on the pasteboard show.
In Presentation Mode, → and ← go to the next and the previous artboard, and a click anywhere goes to the next one, as the status bar navigator's Next and Previous do (`view.goToArtboard`): on the last artboard → and a click leave the view as it is, and so does ← on the first. The arrow keys do not move the selection there, and the tool does not receive a click, so a click selects and draws nothing (behavior reference: [View artwork](https://helpx.adobe.com/illustrator/using/viewing-artwork.html)).
Full Screen Mode and Presentation Mode put the window full screen, covering the taskbar and the window's frame, and Normal Screen Mode or Full Screen Mode with Menu Bar puts it back (#4365); a window the user made full screen stays so.
@@ -1414,6 +1487,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- Without a twist, a tapered Extrude & Bevel wall (and each bevel band) is one flat face; only a twist cuts walls into slices, so no seam between slices paints a light tick or a light line on a tapered, untwisted wall (#7019). Test: `solid::tests::a_tapered_wall_is_one_flat_face_and_a_twisted_one_is_sliced`.
- Extrude & Bevel cuts a corner square where the bevel opens it and its miter would reach past four times the width (a sharp point with the bevel outside, a narrow notch with it inside), so the bevel (and, with the bevel outside, the walls) no longer runs out to a spike that does not line up with the art (#7525). Tests: `solid::tests::a_bevel_cuts_sharp_corners_square`, `solid::tests::a_cap_draws_no_empty_segment_at_a_corner_cut_square`.
- Extrude & Bevel, Inflate and Rotate apply to type: it makes a solid of its glyph outlines, painted with its own fills and strokes or, when it has none, its characters' colour (the first run's), and stays type, so editing the text reshapes the solid (#4715).
- Use Preview Bounds measures Extrude & Bevel, Revolve, Inflate and Rotate by VectorCraft's projected vector art, including fill and stroke effects, group and symbol members, and geometry after projection. Engine regressions cover all four families, hidden effects and the preference off, alignment and spacing with Undo, typed width, and oriented boxes. Raster effects are not measured yet. The [user guide](https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf) (printed page 95, Info panel) says Use Preview Bounds counts the stroke and other appearance attributes in an object's dimensions.
- Extrude & Bevel, Inflate and Rotate (Effect › 3D and Materials): live effects in the `three-d` crate with depth, twist, taper, solid or hollow caps, five original bevel shapes (width, height, repeat, spacing, inside, both sides), Inflate's volume, both sides, twist, taper and cap, Rotate's turned fills and strokes, Position presets, the rotation and light gizmos, SVG/PDF vector output and Expand Appearance; one 3D effect per object; covered by geometry, effect, canvas-versus-export, command and dialog tests ([three-d.md](three-d.md)).
- Extrude & Bevel and Inflate build detailed shapes: each solid takes up to 65,536 outline points and 163,840 faces (VectorCraft's own limits, was 2,048 points and 32,768 faces), counted before any point is sampled; when the faces do not fit, every curve takes fewer pieces, down to 4. A closed path of 2,000 curves extrudes with a bevel and inflates, and paths of 5,000 and 10,000 curves build at the default settings (`crates/three-d/src/solid/tests_limits.rs`).
- The solids of one Extrude & Bevel (both kinds) or Inflate effect on one object, its fill's, its strokes' and a group's members' together, keep up to 163,840 faces (VectorCraft's own limit). Each solid is built in turn; once their faces pass the limit, no later solid is built, the object draws its source art, and applying or editing the effect, Export 3D Object and Expand as Wireframes report that the 3D surface is too complex. Tests `solids::tests::an_objects_solids_count_their_faces_together`, `a_groups_solids_together_past_the_limit_draw_the_source`, `a_fill_and_strokes_together_past_the_limit_draw_the_source`.
@@ -1421,6 +1495,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- Extrude & Bevel (both kinds) and Rotate keep the art's curves in the faces they draw, export and expand: caps and the edges of walls and bevels where they meet a cap are cubics with smooth anchors where the art's are, fitted within 0.001 pt in perspective and within the sampling tolerance on a bevel's inset. An edge of a twisted wall that is cut into pieces, a piece of curve that does not fit after 8 halvings, and the curves past 1,048,576 for one solid stay straight (VectorCraft's own values; [three-d.md](three-d.md#what-differs-from-the-public-documentation)). Tests `solid::tests::a_cap_keeps_the_curves_of_the_art`, `a_cap_in_perspective_fits_the_projected_curves`, `a_beveled_cap_and_its_walls_share_their_curves`, `twisted_beveled_tiny_and_degenerate_caps_keep_their_curves`.
- Export 3D Object (Asset Export's menu): an object with Extrude & Bevel, Revolve, Inflate or Rotate becomes a 3D asset whose Format is USDA (the default), USDZ, glTF or OBJ, and Export writes each of its solids as a mesh with a material in its paint's color (`assets.add3D`, `assets.set3DFormat`, `assets.export3D`; [export 3D vector artwork](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/create-3d-graphics/export-3d-vector-artwork.html)).
- Export 3D Object builds each Extrude & Bevel (both kinds) and Inflate solid once: the same build gives the faces that count toward the object's limit and the faces of its mesh, and the meshes match those of a separate build bit for bit. Tests `mesh::tests::a_meshed_solid_is_built_once`, `an_extruded_solid_and_its_mesh_match_the_two_built_apart`, `inflated_solids_and_their_meshes_match_the_two_built_apart`, `solids::tests_mesh::one_build_exports_the_meshes_built_apart`, `a_stroke_past_the_limits_is_left_out_of_the_export`.
- Export 3D Object writes the graphics mapped onto a plane or onto Extrude & Bevel's front and back caps as a PNG texture of each face, the face's color with its graphics drawn flat and unlit over it, on a mesh of that face with texture coordinates, in all four formats (glTF embeds it, USDZ packs it after the layer, OBJ and USDA write `<name>-texture-1.png` beside them; `assets.export3D` `textureSize`, 128 to 4096 pixels, default 1024, VectorCraft's own values; [the help page](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/create-3d-graphics/map-artwork-on-3d-objects.html)). Graphics on Revolve's side, materials and lighting are not exported. Tests `a_caps_mesh_corners_go_back_to_the_art_they_were_made_from`, `a_mesh_carries_its_caps_graphics_flat_in_the_arts_plane`, `each_format_carries_a_textured_part_with_its_coordinates_and_picture`, `export_3d_paints_mapped_graphics_on_their_caps_in_every_format`.
- Checking an Extrude & Bevel (both kinds) or Inflate effect builds each solid the effect draws once, about the bounds the effect draws it about; a shape with no fill still has its profile built on its own. Tests `solids::tests::the_check_builds_each_drawn_solid_once`, `the_check_builds_the_profile_of_a_shape_with_no_fill`.
- Initial live Revolve (#605, #846): a portable geometry and shading crate (`three-d`), editable path and compound profiles, compact options with artboard rotation and light gizmos, SVG/PDF vector output and Expand Appearance that can trim covered faces. Open ends have continuous caps by default, shading is smooth with one to ten colored lights, and intersecting surfaces' visibility is approximate ([revolve.md](revolve.md)).
- Revolve takes graphics on its swept side, shaded with the object's light ([the archived reference, page 185](https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf#page=185)). By VectorCraft's own rule a graphic wraps around the axis at its own size at every distance from it, narrows toward the silhouette, follows the profile along its length and is hidden where the side faces away (`threeD.mapGraphic`; `revolve::tests_graphics`, `tests::side_faces_lie_on_the_unrolled_surface_and_caps_do_not`, `map_graphic_puts_a_graphic_on_the_side_of_a_revolve`).
@@ -1430,7 +1505,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- Pathfinder Options ([Pathfinder panel overview](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/pathfinder-panel-overview.html)): the panel menu's Pathfinder Options… sets Precision (0.001–10 pt: results refit to within it, thinner pieces dropped), Remove Redundant Points and Divide and Outline Will Remove Unpainted Artwork (`object.pathfinder.options`, kept in the preferences) for every Shape Mode and Pathfinder operation; the defaults keep the earlier output (`pathops` `precision_drops_pieces_thinner_than_it`, engine `tests_pathops` Pathfinder Options tests, `panels::pathfinder` dialog test).
- Pathfinder on clip groups (#8093): a clip group's members take part in the Shape Modes and Pathfinder buttons (`object.pathfinder.*`) only where its clipping path shows them, so Divide cuts the visible art along the mask and the hidden art goes; nested clip groups cut by each mask, a member the mask hides gives no piece, a cutting line's hidden part cuts nothing, a selected object the masks hide altogether counts as an empty shape where that changes the result (Intersect, Minus Front, Minus Back, Crop), and the clipping path adds no piece of its own (the public documentation doesn't say what Pathfinder does with masked art; our choice, asked on the issue). A cutting line is clipped by sampling, so a part of the mask much narrower than the mask itself can be missed. Make Compound Shape, Trap and the Pathfinder effects still take the members whole. Tests: `crates/engine/src/tests/pathfinder_clip.rs`.
- Pathfinder › Trap ([trapping](https://helpx.adobe.com/illustrator/using/trapping.html), [Pathfinder panel](https://helpx.adobe.com/illustrator/using/pathfinder-panel-overview.html)): the Pathfinder panel menu's Trap… (`object.pathfinder.trap`) and Effect › Pathfinder › Trap… (`pathfinder.trap`, live on groups) add, where two objects' visible areas of different solid colours meet, a strip of the darker one's area along the edge, filled with the lighter colour at the Tint Reduction percentage and set to overprint (Reverse Traps: the darker colour spreads instead, but not a rich black); Thickness 0.01–5000 pt across vertical edges, Height/Width scales it across horizontal ones, Traps with Process Color paints a swatch colour's trap with its CMYK equivalent; the effect also has Precision and Remove Redundant Points. The panel's Trap is one undo step and groups the traps above the topmost selected object, selected; with no adjoining edges of different colours it says so and changes nothing. Tests: `crates/pathops/src/trap.rs`, `crates/effects/src/trap.rs`, `group::tests::trap_effect_adds_an_overprinting_strip_above_the_members`, `crates/engine/src/tests/trap.rs`, `panels::pathfinder::tests::trap_opens_its_options_and_ok_traps_the_selection`.
- Compound shapes ([Create compound shapes with Pathfinder](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/create-compound-shapes-with-pathfinder.html), [Pathfinder panel overview](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/pathfinder-panel-overview.html)): the Pathfinder panel menu's Make Compound Shape (every member in Add) and Alt-clicking a Shape Mode (every member in that mode) make the two or more selected paths, compound paths, groups, compound shapes or type a live compound shape (`object.compoundShape.make`): a group whose members each keep a shape mode and stay editable, drawn, printed and exported (SVG, PDF and the rest through the baked document) as the area the modes make from the backmost member up, open paths closed, painted with its own appearance, taken from the topmost member not subtracting. With members selected (Direct Selection, Layers panel, isolation mode) a Shape Mode button sets theirs (`object.compoundShape.setMode`) and is lit for the mode they share; paint given to a member goes to the compound shape. Release Compound Shape gives the members back as they were (`object.compoundShape.release`); Expand Compound Shape and the panel's Expand button turn it into the path or compound path of its area (`object.compoundShape.expand`). Shape Modes and Pathfinders take a compound shape as its area. Saved files keep it (`compound_shape`, `shape_mode`; an unknown mode reads as Add). Blends, envelopes and objects with a warp or another geometry effect are members as they draw (a blend's steps, an envelope's distorted art, the warped outline), and the area follows an edit of the blend, envelope or warp; Release gives them back as they were. Tests: `crates/engine/src/tests/compound_shape.rs`, `group::tests::compound_shapes_draw_the_area_their_shape_modes_make`, `group::tests::nested_compound_shapes_take_part_as_their_area`, `panels::pathfinder::tests::compound_shape_items_follow_the_selection`, the `CompoundShape` op of the property-test strategies. Not yet: the question marks on mixed member modes, hit-testing by the area (a click hits the members).
- Compound shapes ([Create compound shapes with Pathfinder](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/create-compound-shapes-with-pathfinder.html), [Pathfinder panel overview](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/pathfinder-panel-overview.html)): the Pathfinder panel menu's Make Compound Shape (every member in Add) and Alt-clicking a Shape Mode (every member in that mode) make the two or more selected paths, compound paths, groups, compound shapes or type a live compound shape (`object.compoundShape.make`): a group whose members each keep a shape mode and stay editable, drawn, printed and exported (SVG, PDF and the rest through the baked document) as the area the modes make from the backmost member up, open paths closed, painted with its own appearance, taken from the topmost member not subtracting. With members selected (Direct Selection, Layers panel, isolation mode) a Shape Mode button sets theirs (`object.compoundShape.setMode`) and is lit for the mode they share; with members in different modes selected, each of the four Shape Mode buttons carries a question mark and screen readers report it as mixed, and a click gives every selected member that mode in one undo step ([the help page](https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf#page=368)); paint given to a member goes to the compound shape. Release Compound Shape gives the members back as they were (`object.compoundShape.release`); Expand Compound Shape and the panel's Expand button turn it into the path or compound path of its area (`object.compoundShape.expand`). Shape Modes and Pathfinders take a compound shape as its area. Saved files keep it (`compound_shape`, `shape_mode`; an unknown mode reads as Add). Blends, envelopes and objects with a warp or another geometry effect are members as they draw (a blend's steps, an envelope's distorted art, the warped outline), and the area follows an edit of the blend, envelope or warp; Release gives them back as they were. Tests: `crates/engine/src/tests/compound_shape.rs`, `group::tests::compound_shapes_draw_the_area_their_shape_modes_make`, `group::tests::nested_compound_shapes_take_part_as_their_area`, `panels::pathfinder::tests::compound_shape_items_follow_the_selection`, `panels::pathfinder::tests::shape_modes_show_a_question_mark_while_the_selected_members_modes_differ`, `panels::pathfinder::tests::members_of_two_compound_shapes_are_compared_together`, `panels::pathfinder::tests::shape_modes_show_no_question_mark_without_mixed_members`, the `CompoundShape` op of the property-test strategies. Not yet: hit-testing by the area (a click hits the members).
- Effect › Path › Outline Object has no options. Type that carries it is drawn, exported (PDF and SVG as paths, with no font) and expanded as its glyph outlines while it stays editable, and the effects after it reshape those outlines. Paths and images draw as before. With Use Preview Bounds on, type is measured by its glyph outlines. Public reference: [Summary of effects](https://web.archive.org/web/20210901011839/https://helpx.adobe.com/illustrator/using/summary-effects.html) (archived copy).
- A butt cap ends a stroke square at the end of an open path, and a projecting cap extends half the weight past it. VectorCraft's visual box of a butt-capped stroke on an open path does not grow past the path's ends: a straight segment's box comes from the corners of its stroked rectangle, and a curve's box comes from the stroke at its ends and where its tangent is square to an axis. Round and projecting caps and arrowheads still reach past an end. A curve that bends more tightly than half the weight can measure a little larger than it paints, and a butt-dashed path whose first or last dash is a gap is measured to the path's ends. Public reference: [Apply stroke on an object](https://helpx.adobe.com/illustrator/using/stroke-object.html).
- A butt-capped curve whose first or last handle sits on its end point also stops at that end: a straight 50 pt curve with a 2 pt stroke and its first handle on its start point measures 50 pt tall, not 51 pt (doc `reach::tests::a_butt_curve_with_a_handle_on_its_end_point_stops_near_that_end`).
@@ -1457,6 +1532,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **Vertical punctuation:** fullwidth `!` (U+FF01) and `?` (U+FF1F) use their nominal glyph upright when no vertical alternate is present, following the Tu fallback in [Unicode UAX #50 §3.1](https://www.unicode.org/reports/tr50/#vo). Code-built test fonts cover point and area type with and without `vert` alternates, retain the rotated fallback for a bracket and long vowel mark, and leave horizontal type unchanged. Tests: `crates/text/src/tests/vertical.rs`.
- Free Distort's dialog (Effect › Distort & Transform › Free Distort…) shows a box in the proportions of the first selected object's bounds with a handle on each corner. Dragging a handle moves that corner. A handle focused by a click or Tab moves 1% of the box with each arrow key, and 10% with Shift. Reset puts the four corners back on the box. The preview and OK run `effect.apply`, or `effect.setParams` when the dialog edits an applied effect, and the Appearance panel's inline editor opens the dialog with Edit…. Behavior reference: Illustrator CC Help (2014, [PDF](https://help.adobe.com/archive/en/illustrator/cc/2014/illustrator_reference.pdf)), page 285 (PDF page 291).
- **Kerning at the start of a line:** at the Type tool's caret before the first character of the text, of a paragraph, or after a forced line break, the Kerning field, Alt+←/→ (Alt+↓/↑ in vertical type) and Reset Tracking and Kerning set the space before the character after the caret (`kerningBefore`), as the reporter of #5111 describes the reference; the character moves along its line and the rest of the line follows, as one undo step (#5111). It used to do nothing there, or kern the invisible line break. Inside a line the caret still kerns the character before it. A line that wraps in area type takes no space before its first character, and Touch Type still moves a line's first character only up and down. SVG export starts the line where the character is drawn, and on a path writes the space as the first character's `dx`; vertical type moves the character down its column. A space on the first letter of a ligature keeps the ligature whole. Tests: `tests::caret_kerning` (engine), `tests::kerning_before` (text), `the_space_before_a_lines_first_character_moves_its_tspan` (SVG).
- **Forced Line Break:** Type › Insert Break Character › Forced Line Break starts a new line without starting a new paragraph, as [the help page](https://helpx.adobe.com/illustrator/desktop/design-with-text/special-characters-glyphs/insert-white-space-and-break-characters.html) describes: it inserts U+2028, the character Shift+Enter types, so the paragraph's Space Before does not come between the two lines (`type.insert {char: "forcedLineBreak"}`; `paragraphReturn` still inserts a line feed). Storing the break as U+2028 is VectorCraft's own choice. While the Type tool edits text, this item and the other Insert Special, Whitespace and Break Character items insert at its caret or replace its selection as one undo step, with the caret after them; without a Type tool edit they append to the selected type objects. Tests: `tests::menucmds::insert_forced_line_break_differs_from_paragraph_return`, `tests::menucmds::insert_character_goes_to_the_type_tool_caret`.
- **Optical kerning:** Character and Properties offer Optical beside Auto for automatic pair spacing. The side-profile spacing method is VectorCraft's own: each pair moves part of the way toward the font's own stem spacing (the gap of `nn`, else `HH` or `oo`), keeps at least part of that gap where the outlines come closest, and changes by at most 0.12 em tighter or 0.06 em looser, so ordinary text keeps the font's spacing (#5336). Ideographs, kana, hangul, fullwidth and CJK punctuation forms and dashes keep the font's spacing. Optical keeps its mode across cosmetic style runs. Choosing Optical clears manual pair values, as Auto does, and leaves additive tracking intact; a manual value typed afterwards replaces that pair's correction ([Adjust kerning and tracking](https://helpx.adobe.com/illustrator/desktop/design-with-text/edit-format-text/adjust-kerning-and-tracking.html)). Native documents retain the mode and pair overrides; old documents use Auto. Behavior reference: [Line and character spacing](https://web.archive.org/web/20260916050333/https://helpx.adobe.com/illustrator/using/line-character-spacing.html) (public documentation). Tests: `crates/text/src/tests/typo.rs`, `crates/engine/src/tests/textedit.rs`.
- **Kerning across style runs:** characters that differ only in fill, stroke, underline, strikethrough, overprint, character style name, leading, baseline shift, rotation, Character Alignment, kerning, or tracking that keeps or drops ligatures alike are shaped together, so restyling one character keeps the font's kerning pairs with its neighbors. A character with manual kerning that follows one with automatic kerning keeps the font's kerning with it (unless All Caps or Small Caps sets it as two letters, as ß becomes SS), and its value replaces the font's kerning after it. A ligature does not form across a change of style, and a change of font, size or OpenType features still shapes the characters apart. Behavior reference: [Line and character spacing](https://web.archive.org/web/20260916050333/https://helpx.adobe.com/illustrator/using/line-character-spacing.html) (public documentation). Tests: `crates/text/src/tests/typo.rs`, `crates/text/src/tests/bidi.rs`.
- **Manual kerning in right-to-left text:** a manual kerning value on a Hebrew or Arabic character changes the space between it and the next character in reading order, the one drawn to its left, under Auto and Optical kerning. The character before it keeps its place, and the caret between the pair stays beside the next character. The side the space goes on is VectorCraft's own rule. Behavior reference: [Line and character spacing](https://web.archive.org/web/20260916050333/https://helpx.adobe.com/illustrator/using/line-character-spacing.html). Test: `rtl_manual_kerning_spaces_the_character_from_the_next_in_reading_order`.
@@ -1467,6 +1543,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **Show samples on white (a VectorCraft addition):** Preferences › Type › Show samples on white (`fontSamplesOnWhite`, off by default) draws each family's sample in every font menu, and in Type → Font in the in-window menu bar, in dark type on a white area in every interface brightness. A highlighted row's color shows above and below the white area, and the names and the rest of the menu keep the interface's colors. The checkbox is dimmed while Enable in-menu font previews is off. Tests: `crates/ui-egui/src/tests/font_menu.rs`, `crates/ui-egui/src/font_menu/tests.rs`, `crates/ui-egui/src/prefs_dialog/tests.rs`.
- **Show Similar Fonts: families without numbers come last:** in a font menu's Show Similar Fonts list and `text.similarFonts`, a family whose faces give none of the numbers the list compares (PANOSE, weight, width, heights, average width, italic angle) in common with the chosen family comes after every family of its script group that shares one, instead of right after the chosen family as an exact match. This is VectorCraft's own rule; the help page (https://helpx.adobe.com/illustrator/desktop/design-with-text/fonts-and-scripts/font-options-overview.html) describes the list only as fonts that look like the chosen one. Regression tests: `a_family_without_numbers_comes_after_the_measured_ones` and `likeness_is_a_distance` in `crates/text/src/tests/similar.rs`.
- **Find Font: Replace With Font From:** a dropdown under Replace With Font chooses the list the replacement font comes from: Document lists the families the document uses, once each; Recent lists the recently applied families that are installed (fonts applied with Find Font's Change and Change All included), newest first, as many as Preferences › Type › Number of Recent Fonts allows; System, the default, lists the installed families available in the font menu. The dialog opens on System with Source Sans 3 chosen, or the font menu's first family when Source Sans 3 is not installed. Choosing a list keeps the chosen font when the list has it and it is installed; otherwise Document and Recent choose the list's first installed font, and System chooses Source Sans 3 or the font menu's first family. Change and Change All are unavailable when the list has no installed font (Recent before any font was applied) and when the chosen family is not installed or is not in the shown list. Behavior reference: [Find and replace fonts](https://helpx.adobe.com/illustrator/desktop/design-with-text/fonts-and-scripts/find-and-replace-fonts.html) (public documentation). Tests: `crates/ui-egui/src/find_font.rs`.
- **Find Font: Escape and the replacement search:** Escape with the Replace With Font From or Find In list open closes only the list. The dialog stays open with its choices and its search, also while Escape is held down, and the next press of Escape closes it. Done, Enter, Escape, and Find in Folder… once the Missing Fonts dialog opens, each forget the replacement search, so the next Find Font starts with an empty one; with no folder picked, Find Font stays open with its search. This is VectorCraft's own rule: a dropdown or popover open in a dialog closes before the dialog. Tests: `crates/ui-egui/src/find_font.rs`.
- **Select Text by Font: scope (a VectorCraft addition, #5529):** `select.font` takes `scope`: `"document"` (the default, as before), `{artboards: [index, …]}` or `{layers: [id, …]}` (sublayers included). On an artboard means what All on Active Artboard takes (the bounds overlap it or the center is on it; one shared test, `select::on_artboard`); hidden and locked text stays out as before; a symbol instance counts where the instance is. Type › Find Font…'s Find In dropdown passes the active artboard or the selected layers (else the current layer). Tests: `crates/engine/src/cmd/fonts.rs`, `crates/ui-egui/src/find_font.rs`, `crates/engine/tests/command_sweep.rs`.
- **Find Font: type in opacity masks and pattern swatches:** Type › Find Font…'s Document list (`text.fonts`), Find (`select.font`), Change and Change All (`text.replaceFont`), Replace Missing Fonts (`addon.cleanup.replaceFonts`), the Missing Fonts dialog (`text.missingFonts`), Document Info's Fonts and Font Details for the whole document (`document.info`), File › Package and the export warning about fonts that aren't available include the type in opacity masks (on objects and layers, disabled masks and masks inside mask, symbol or pattern art included) and in the art of pattern swatches, also a swatch that nothing paints with. A pattern's type is listed and changed once, however many objects the pattern paints. Find selects the objects whose mask holds the font, the text whose inline graphics draw a symbol whose art uses it, and the objects painted with a pattern whose art uses it by a visible fill or stroke above 0% opacity (VectorCraft's own rule; a layer's mask and a swatch that nothing paints with select nothing); Change and Change All leave the type in the mask of a hidden or locked object in its font and count it in `skipped`, and Change does the same with the type of a pattern that only hidden or locked selected objects paint with. The help page (https://helpx.adobe.com/illustrator/desktop/design-with-text/fonts-and-scripts/find-and-replace-fonts.html) says the Document list holds all the fonts the document uses. Tests: `crates/engine/src/cmd/fonts.rs`, `crates/engine/src/cmd/addons/cleanup/text/tests.rs`, `crates/engine/src/cmd/docinfo.rs`.
- **Mouse wheel over the font family field (#5253):** In the Character and Properties panels and the Control bar, turning the mouse wheel over the closed font family field applies the next family to the selected type (the previous one when turned up), keeping the style when the family has it, else its closest. Each notch is one undo step; leaving the field or Escape keeps the family, and Undo takes it back. The steps use the font menu's order at the first turn and keep it until the pointer leaves the field or the text selection changes, so recent-font updates do not reshuffle later turns. That order follows the font filters every font menu shares (one chosen in the Glyphs panel's menu or a dialog's applies too) but ignores its search text, puts recent families first, and stops at the first and last family. A turn with a modifier key is left to the panel and the canvas. Behavior reference: the [Illustrator CS6 reference](https://help.adobe.com/archive/en/illustrator/cs6/illustrator_reference.pdf#page=10) describes editing hovered dropdown controls with the mouse wheel; [Find and apply fonts](https://helpx.adobe.com/illustrator/desktop/design-with-text/fonts-and-scripts/find-and-apply-fonts.html) names the family field's places. Applying it to the font field, the order, the ends and the undo steps are VectorCraft's own rules. Tests: `crates/ui-egui/src/tests/font_menu.rs`, `crates/ui-egui/src/font_menu/tests.rs`, `crates/ui-egui/tests/font_wheel.rs`.
@@ -1495,6 +1572,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
For Auto Size area type in columns, the bisection for the frame's height runs on the lines of the one-column layout, and its result is checked with at most two layouts of the columns. When the text wraps around objects or does not fit the one-column layout, or when the check fails, the columns are laid out at every step of the bisection, as before. Typing at the start of a story of 50,000 characters in 2 columns took 1,670 ms a keystroke and now takes 292 ms (release build, `auto_height_in_columns_typing_timing`).
Exports to PDF, EPS, SVG, EMF, WMF and the raster formats warn about the area type and type on a path that they draw without the text that doesn't fit, and give their ids, as Print and Print Preview do.
On a shaped area type frame, Inset Spacing keeps text that far from the frame's edge, holes included, measured from the edge itself rather than along the line; the archived help treats the inset as the space an area type object leaves between its text and the path that bounds it (<https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=317>, <https://web.archive.org/web/20220911143322/https://helpx.adobe.com/pdf/cs6/illustrator_reference.pdf#page=325>). A rectangular frame keeps its inset from each side as before, and a column's inner edges keep it once. An edge that two contours of the frame share lies inside the frame, so text runs across it with no inset on either side, and a negative text wrap offset does not shrink a wrap object beside such an edge. Tests: `layout::region::inset_on_a_shaped_frame_is_measured_from_its_sloped_edge`, `inset_keeps_text_clear_of_a_hole_s_sloped_edges`, `inset_applies_once_at_a_column_s_edge_and_at_the_frame_s_edge`, `inset_is_not_kept_beside_an_edge_two_contours_share`, `negative_wrap_offset_does_not_shrink_beside_an_edge_two_contours_share`.
Area Type Options › First Baseline offers Em Box Height (`text.areaOptions {firstBaseline: "emBoxHeight"}`), which the help page describes as using the font's em box height (<https://helpx.adobe.com/illustrator/desktop/design-with-text/add-manage-text/add-margins-to-text-and-adjust-the-first-baseline.html>): the top of the first line's ideographic em box, the largest on a line of several sizes, touches the top of the type area inside the inset, in each row/column cell and in vertical type from the frame's right edge. The em box is the one Top-to-Top leading uses (VectorCraft's own measure: an ideograph's cell in the font's vertical metrics, else 0.88 em above the baseline), and Min is the least distance, as with the other kinds. Native files and `.ai` files save and open it; a `.ai` First Baseline kind VectorCraft does not read keeps today's fallback. Tests: `em_box_height_puts_the_first_lines_em_box_top_at_the_type_area_top`, `em_box_height_sets_a_vertical_frames_first_column_at_its_em_box`, `area_options_set_the_em_box_height_first_baseline`, `every_first_baseline_kind_comes_back_with_its_minimum`.
An edit copies a thread's story only when it changes one of the thread's frames: with a story of 50,000 characters threaded through 8 frames with a style change at every word, moving another object took 7.8 ms and now takes 0.013 ms, and a frame of a drag took 7.2 ms and now takes 0.012 ms (release build, `threaded_story_edit_timing`).
When a story flows through threaded area type, each frame is measured with the whole paragraphs of the story that it needs and a few more, not with the whole rest of the story, and it keeps the same text as before. A story of 1,500 one-line paragraphs (55,892 bytes) through 40 frames was laid out over 2,126,762 bytes of text while the frames were measured, and is now laid out over 21,035 (`thread::tests::many_frames_measure_about_the_text_they_take`). Area type with its lines aligned to the center, the bottom or justified vertically, and type on a path whose first paragraph is aligned Left, Justify Left, Justify All or Auto, are measured the same way: the same story through 40 area frames aligned to the center was laid out over 2,126,762 bytes and is now laid out over 21,035, through 40 paths aligned Left over 2,135,202 bytes and now over 20,583, and through 40 paths aligned Justify All over 2,135,202 bytes and now over 20,583 (same test). Shrink Text to Fit, Dynamic Text, Optical Margin Alignment and Roman Hanging Punctuation on a path, a path aligned to the center or the right, horizontal type on a path whose first paragraph is set right to left or with right-to-left text in the rest of the story, and a frame whose share ends in the story's last paragraph are still measured with the whole rest.
A paragraph that continues from one threaded frame into the next has its first-line indent and bullet or number in the frame where it starts; in the next frame its first line starts where its wrapped lines start. In frames that are no longer threaded, copies of a frame and point type converted from one, the first paragraph has its indent and bullet or number again.
@@ -1506,6 +1584,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
Select › Same › Text Fill & Stroke Color selects the type whose characters match both the fill and the stroke of the selected type (`select.same.textFillAndStrokeColor`). The menu entry is listed in [Select objects by characteristics](https://helpx.adobe.com/illustrator/desktop/manage-objects/select-objects/select-objects-by-characteristics.html); requiring one run of characters to match both is VectorCraft's own behavior.
The Select › Same font and text color commands take the type to match from the selected type that can be selected: type that is hidden or locked, on a template layer, or outside the isolated group is passed over. This is VectorCraft's own behavior.
Select › Same › Fill Color, Stroke Color, Fill & Stroke, Stroke Weight, Opacity, Blending Mode, Appearance, Shape, Graphic Style, Appearance Attribute and Symbol Instance compare the other objects with the first selected object that can be selected, of any kind: an object that is hidden or locked, on a template layer, on a locked artboard while nothing is isolated (except new art while it stays selected), or outside the isolated group is passed over. This is VectorCraft's own behavior.
Select › Same, Select by Color (`select.color`) and `document.find` read the object that holds each object they check from their walk of the document, instead of looking it up by id for each object. They select the same objects as before. On a document of 220,482 objects, the search of Select › Same › Fill Color takes a median of 24 ms of CPU time instead of 83 ms in a release build on Linux, and of Stroke Color 22 ms instead of 60 ms (seven alternating runs, `cargo test --release -p vectorcraft-engine --lib select_same_perf -- --ignored --nocapture`).
Select › Object › All on Same Layers takes the layers only of the selected objects that can be selected: an object that is hidden or locked, on a template layer, on a locked artboard while nothing is isolated, or outside the isolated group adds no layer. This is VectorCraft's own behavior.
Object › Flatten Transparency takes a frame of threaded text out of the thread in the same way when Convert All Text to Outlines outlines it or when the frame becomes flat regions or an image, and the other frames keep the text they hold.
Object › Flatten Transparency, the Flattener Preview, and EPS, PDF and print output that flatten transparency stop building a group's flat regions at the first region past the raster/vector balance's limit (10^(balance/20), rounded down) and rasterize the whole group without building the remaining regions. Building every region gives the same flattened art and the same files. With Clip Complex Regions on, a group builds every region and its image is clipped to them.
@@ -1531,6 +1610,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
The Paragraph panel menu's Korean Line Break Anywhere (`text.setFormat {koreanLineBreakAnywhere}`, with the East Asian options, and the East Asian Composition Settings section of Paragraph Style Options) sets for each paragraph whether a line may break between any two Hangul syllables. When it is off, a word that contains Hangul breaks only at its spaces and after punctuation, or where the word is wider than the line, and takes no hyphen. New type has it off; paragraphs saved before the option read as on, so their lines do not move.
The Paragraph panel menu's Reset Panel (`text.setStyle`, `text.setFormat` and `text.tabs.clear`) gives the selected type's paragraphs, or the paragraphs the Type tool's selection touches, Auto alignment, no indents or paragraph spacing, Hyphenate off with the default Hyphenation and Justification options, Auto direction, Bottom-to-Bottom Leading, the Line-end Punctuation Half Width Mojikumi Set, Regular burasagari, the Hard kinsoku set, Push Out Only, the Every-line Composer, Bunri-Kinshi, Roman Hanging Punctuation and Korean Line Break Anywhere off, no kashidas and no tab stops, as one undo step.
The Paragraph panel menu's Hyphenation… (`ui.hyphenation`, `text.setFormat {wordsLongerThan, afterFirst, beforeLast, hyphenLimit, hyphenationZone, hyphenateCapitalized}`) sets each paragraph's hyphenation limits: the shortest word that breaks, the fewest letters on each side of the hyphen, the most hyphenated lines in a row, a zone at the right edge where the Single-line Composer breaks before a word instead of hyphenating it, and whether capitalized words break. The defaults are words longer than 5 letters, 3 letters on each side, no limit or zone, and capitalized words hyphenated; paragraph styles and the native file keep the options.
Text whose Character panel Language is Bulgarian, Turkish or Russian hyphenates by that language's syllable rules, and German, Polish, Portuguese or Italian text by that language's hyph-utf8 patterns in builds that embed them, within the paragraph's Hyphenation options, in both composers ([Assign languages to text](https://helpx.adobe.com/illustrator/desktop/design-with-text/fonts-and-scripts/assign-languages-to-text.html)). A word written outside its language's script stays whole, and the Preferences exceptions still come first.
PDF export with type as text writes the hyphen that ends a line broken inside a word as a hyphen character where the line draws it, and the file opens with the hyphen in the line's text; kashidas are drawn as paths.
The Paragraph panel's Insert Kashidas (with the Indic options; `text.setFormat {kashida}`) lengthens each Arabic word of a justified horizontal area type line with a kashida, a tatweel between its last pair of joined letters, before the word spaces widen: Short, Medium and Long kashidas are at most a quarter, half and a whole em long, Stylistic ones are whole tatweels up to an em, and None (the default) leaves the line as before; paragraph styles and the native file keep the setting.
The Character panel menu's Kashidas switch (with the Indic options; `text.setFormat` / `text.setRangeStyle {kashidas}`) allows Kashidas on selected characters, on by default for new and old text. A pair of joined letters receives one only when both characters allow it; turning one off leaves other eligible pairs in the word available. Character styles and the native file keep the switch. [Public help](https://helpx.adobe.com/illustrator/desktop/design-with-text/fonts-and-scripts/justify-text-using-kashida-and-hyphenation.html) documents the menu control and the separate paragraph length choices; the default and pair rule are VectorCraft choices.
@@ -1541,6 +1621,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
The Paragraph panel's Numbered List button, Type › Bullets and Numbering › Apply Numbers and the context menu's Apply Numbers (`text.setFormat {list, number}`, `type.applyNumbers`) make paragraphs a numbered list with the documented presets (1, A, a, I, i, 01, 001, and None, which turns the list off; [Bullets and numbering](https://web.archive.org/web/20250807202418/https://helpx.adobe.com/illustrator/using/bullets-numbering.html), [Create bulleted or numbered lists](https://web.archive.org/web/20260417034638/https://helpx.adobe.com/illustrator/desktop/design-with-text/edit-format-text/create-bulleted-or-numbered-lists.html)): each paragraph starts with its number and a period, counted through the list paragraphs of the story and its threaded frames, with the text and indents as in a bulleted list; letters go on from Z to AA, and roman numerals go on from III to IV, an empty paragraph is not numbered, and a paragraph in no list starts the count again at 1.
More Options in the Bullets and Numbered List presets (`ui.bulletsAndNumbering`) opens the Bullets and Numbering dialog ([Create bulleted or numbered lists](https://web.archive.org/web/20260417034638/https://helpx.adobe.com/illustrator/desktop/design-with-text/edit-format-text/create-bulleted-or-numbered-lists.html)): a Bullets tab and a Numbers tab with the presets, and the Position group's Alignment, Left Indent and First Line Indent, shown on the type while the dialog is open; OK applies them with `text.setFormat` (Alignment is its `listAlign`) as one undo step, and Cancel puts the type back. Alignment Left starts the marker at the first line's start, and Right ends it where the text starts. The cited page does not say where the marker sits for each choice, so these meanings are VectorCraft's own rule. Paragraph styles and the native file keep the alignment.
Tab and Shift+Tab with the caret at the start of a list paragraph (`text.setFormat {listLevel}`), and the Bullets and Numbering dialog's Level field (OK sends it as `listLevel`), move the paragraph down and up the list's nine levels ([Create bulleted or numbered lists](https://web.archive.org/web/20260417034638/https://helpx.adobe.com/illustrator/desktop/design-with-text/edit-format-text/create-bulleted-or-numbered-lists.html), [Bullets and numbering](https://web.archive.org/web/20250807202418/https://helpx.adobe.com/illustrator/using/bullets-numbering.html)): each level past the first sets the paragraph 18 pt further in, each level counts its own numbers from 1, and a paragraph back at a shallower level goes on with that level's count, through threaded frames too. Elsewhere Tab inserts a tab as before; one Undo takes a level change back, and paragraph styles and the native file keep the level. Convert to Text writes each level's numbers and keeps a deeper paragraph's indent.
VectorCraft's own (the help pages above show no such control; requested in #2473): the Bullets and Numbering dialog's Start at box (`text.setFormat {startNumber}`, and `restartNumbering` for 1) gives a numbered paragraph a number from 1 to 999999999, and the numbered paragraphs after it at its level count on from it, through threaded frames too; off, the paragraphs count on from the one before. One Undo takes it back, the native file keeps it, a paragraph made with Return and a paragraph style do not take it, and Convert to Text and the exports write the numbers shown.
Type › Bullets and Numbering › Convert to Text (`type.convertListToText`, `text.convertListToText`) makes the bullets and numbers of the list paragraphs editable characters of their text ([Create bulleted or numbered lists](https://web.archive.org/web/20260417034638/https://helpx.adobe.com/illustrator/desktop/design-with-text/edit-format-text/create-bulleted-or-numbered-lists.html), [December 2022 release notes](https://web.archive.org/web/20260203094741/https://helpx.adobe.com/illustrator/using/whats-new/2023-1.html)): each marker becomes its characters and a tab at the start of its paragraph, in the marker's font, size and color, the list is turned off, and a left tab stop at the left indent keeps the text after the tab where it started; threaded type keeps the numbers its story counted.
While no type is being edited, a press with Shift held makes new type with the horizontal or vertical counterpart of the Type, Area Type or Type on a Path tool chosen, and a press with Alt (Option) held makes it with Type on a Path in place of Area Type or the reverse, in the chosen tool's writing direction; with both keys held, both switch ([Default keyboard shortcuts](https://web.archive.org/web/20260726060015/https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html)). The pointer shows the tool the press acts as, and the tool chosen stays selected.
The Type tool starts a list from the characters [Create bulleted or numbered lists](https://web.archive.org/web/20260417034638/https://helpx.adobe.com/illustrator/desktop/design-with-text/edit-format-text/create-bulleted-or-numbered-lists.html) names (`text.startList`): a space typed on its own after `1.`, `1)`, `A.` or `A)` at the start of a paragraph in no list makes the paragraph a numbered list in 1, 2, 3 or A, B, C, and a space typed after `*`, `+`, `#` or `>` makes it a bulleted list with the filled dot, the hollow circle, the filled square or the dash (a VectorCraft choice: the page does not say which bullet each character gives). The typed characters are removed, and one Undo puts them back as text with no list. The same characters later in a paragraph, and pasted list characters, start nothing.
@@ -1611,6 +1692,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **Image Trace, cut-out edges choose no color:** in Color and Grayscale, the edge pixels that take the color beside them, and the semi-transparent pixels within two pixels of them whose color is also the opaque art's color blended with the background, do not count when the palette or the grays are chosen, so the edge of a cut-out image no longer adds a second shade of a color to Auto Color's palette, takes away an outline's color or takes a gray of its own; beside those pixels, the anti-aliasing between a color and an outline drawn along the edge is no color of Auto Color's own when it lies at least 0.45 of the way from the color to the outline and at least one in 32 of its pixels has both around it (edge pixels that choose no color count when they lie within 2.5 Oklab × 100 of the nearest of those colors): its pixels trace as the outline, so a thin outline stays a ring of few pieces, except beside an outline along the edge with a region of 8 pixels of its own, where each takes the nearer of the two, so a wider outline is not drawn wider; an outline over the edge in the color of other art traces in that color, while an opaque rim drawn along the edge keeps its color, also where other art reaches it; a thin semi-transparent outline of another color still counts, and opaque images trace as before; code-drawn cut-out outline, rim, opaque line and grayscale edge tests in `crates/trace`.
- **Image Trace, blurred edges:** in Color with a Limited palette of at most 16 colors (3 Colors, 6 Colors, 16 Colors) and in Grayscale with at most 16 grays (Shades of Gray), by VectorCraft's own rule (RGB distances, 0 to 255 a channel), a blend pixel with no unblended pixel of its own color within 4 pixels takes the nearer side of the pair of colors within 8 pixels that it is best a blend of, of the 8 colors within 8 pixels nearest to its color, when that pair explains it twice as well as its own color, or when it lies between the two and off the line between them by less than 0.15 of their distance apart; it keeps its color when it is one of the pair. Grayscale compares lightness. The in-between tones of an edge blurred over several pixels no longer trace as rings around it. High Fidelity Photo, Low Fidelity Photo and Black and White trace as before, and so do Automatic, Full Tone and Document Library palettes. Noisy and textured images settle more of their pixels. By `crates/trace/tests/quality` (256 px variants), 16 Colors on blurred flat art went from 9.0 paths to 3.0, 158 anchors to 34 and 0.239 px off to 0.069, and 6 Colors from 6.0 paths to 3.0 and 0.226 px off to 0.071; askew shapes take up to 11 px more area in colors the art does not have, and with 16 Colors the largest distance from a thin line's outline to the trace goes from 23.5 px to 45.3 (see [quality notes](image-trace-quality.md#blurred-edges)). Code-drawn blurred-disc and grayscale ramp tests in `crates/trace`.
- **Image Trace, preset Paths, Corners and Noise:** every built-in preset but Auto Color and Flat Logo traces at Paths 50, and so do their enhanced versions; among those presets, Corners is 100 in Technical Drawing, 75 in Default, Black and White Logo, Line Art and Outline and 50 in the other eight, and Noise is 1 to 90 px by preset. Palettes and color counts are unchanged. Figures for these presets in the other Image Trace entries were measured at the earlier values. By `crates/trace/tests/quality`, High Fidelity Photo goes from 5,494 anchors to 3,136 and Black and White Logo from 27 to 14, while 16 Colors on flat art goes from 0.100 px off to 0.123 (see [quality notes](image-trace-quality.md#preset-paths-corners-and-noise)). Test `presets_have_their_paths_corners_and_noise` in `crates/trace`.
- **Image Trace, High Fidelity Photo in Full Tone:** High Fidelity Photo traces with Palette › Full Tone at Color detail 85 and Method › Abutting (VectorCraft's own values; it was a Limited palette of 64 colors, Overlapping). Palette › Full Tone splits into at least one color per step of Color detail where the image has that many, and then merges the colors that look alike (less than 5 apart in Oklab × 100 and thoroughly mixed, or less than 1.5 and mixed in patches), which can leave far fewer; this applies to every Full Tone trace. On 19 test images the summed mean pixel difference fell from 80.5 to 65.6 levels, with 1.66 times the anchors and 1.7 times the trace time (see [quality notes](image-trace-quality.md#high-fidelity-photo-in-full-tone)). Tests in `crates/trace`.
- **Image Trace, Noise joins the nearest color:** in Color and Grayscale, a region below Noise whose longest-border color is 10 or more apart from its own (Oklab × 100) joins the neighboring color nearest the average of its pixels (leaving out cut-edge pixels that are the color beside them blended with the transparent background), among those sharing at least a tenth of that border, so thin dark lines no longer break into dashes; a single pixel tied between colors joins by border (VectorCraft's own rule and values). 6 Colors and 16 Colors use Noise 8 and Black and White Logo Noise 5. On three illustrations with fine dark lines the mean difference falls 29% to 42% (16 Colors) with 72% to 99% more anchors (see [quality notes](image-trace-quality.md#noise-joins-the-nearest-color)). Tests in `crates/trace/src/quantize/denoise.rs`. Scores and hours unchanged.
- **Image Trace, simpler contour walk:** `contour::trace_mask` works out each turn from the pixels during the walk, with no precomputed direction table and no assertion; identical loops to the previous walk on every 4 × 4 mask (see [quality notes](image-trace-quality.md#a-simpler-contour-walk)).
- **Image Trace, measured:** `crates/trace/tests/quality` traces drawings made from known vector art with every preset and [`image-trace-quality.md`](image-trace-quality.md) records the numbers against the baseline. Black and White, Grayscale and Color place each edge by the blend of the pixels across it (to a fraction of a pixel on anti-aliased and blurred images; hard-edged images are read as staircases) and fit outlines as Flat Logo does. *Measured* on each preset's own inputs, all sizes and variants: Default's outlines went from 0.31 px off on average to 0.09 (largest 1.51 to 1.02), Black and White Logo's from 0.27 to 0.06 with 0.3 kinks per trace where it had 15, and the gaps between abutting paths from 64 px to 22. On clean curved shapes Black and White Logo is 0.02 px off (the open tracer measured beside it: 0.20). The palette is made of the picture's own colours (blends along edges take none of it, colours that noise made of one colour merge, a blend pixel goes to one of the two colours it lies between; #1504): 16 Colors on flat art, all variants, went from 70 paths to 4.2 and from 5.1 px off to 0.13, with no path left in a colour the art doesn't have (5.9 before). Photos are smoothed within their tones before they are quantised and stacked layers go by lightness (#1516): High Fidelity Photo went from 3,653 paths to 121 with its colour error down from 2.30 to 1.75, and a 16 megapixel photo-like image is traced in 3.5 s where 4 megapixels were refused. Since then, by the same harness: outlines are cut at their junctions and each shared piece is fitted once (#1535: gaps and overlaps between abutting paths 22 to 50 px of area down to under 2); layers are traced within the box of their pixels and a few at a time (#1546: a 16 megapixel photo 3.9 GB to 0.9 GB); black and white are read against the image's own black and the paper near each edge (#1563, for thin lines in blurred and scanned art); Ignore Color and the Auto Color and Outline presets (#1574); Snap Curves To Lines levels lines within 2.5 degrees of level or upright (#1593, the angle our choice); Create: Strokes puts centre lines in the middle of their ink and makes them as wide as it (#1595: Outline 0.295 to 0.052 px from the true centre line, 18.4 to 2.7 anchors a stroke); sharp corners whose pixel is mostly outside the shape stay corners (#1609: Default 69% to 76% kept). Three options, each off unless asked for as the legacy presets have them: Shapes (#1609: 57 to 62% of plain circles, ellipses, rectangles and regular polygons come out as live shapes, rounded rectangles rarely), Auto Grouping (#1618: paths grouped with what lies inside them, the same picture) and Gradients (#1627: linear gradients traced as one gradient-filled path; on gradient inputs 6 Colors' colour error 2.12 to 0.62 with 6.4 to 3.4 paths, none found in flat art). Snap Curves To Lines moves no end of a line by more than 1.6 px, so long lines a degree or two off stay as the image has them (#1647: Technical Drawing's largest distance 4.21 px to 1.46). Flat Logo takes the tones a scan's uneven paper makes of one colour for one colour (#1657: on scans 470 paths and 21 px off to 8.5 paths and 0.09 px). Shapes finds rounded rectangles and shapes in aliased, blurred and scanned art (#1845: 57 to 62% of the plain shapes up to 98 to 100%, no false shape but one line 2 px wide). Stroked lines get square caps where their ink is cut square, and a wide end that turned towards a corner goes back on its line (#1846: Outline's largest distance 2.94 px to 0.88, 14 anchors to 10). Each of the 14 documented presets has an enhanced version with Auto Grouping and, in all but High Fidelity Photo, Shapes (#1847), measured beside its preset: equal or better within 0.005 px and 1% of edge ΔE on every preset's own inputs (Default 0.091 to 0.083 px); Auto Grouping keeps traced order in its groups, which removed a light seam along the counters of letters. Gradients grows a gradient over the pixels noise and soft rims took off it (#1848: blurred and noisy linear gradients 3 to 11 paths beside the gradient down to 0.5 with 6 Colors, 24 to 56 down to 0.5 to 1.5 with High Fidelity Photo). Silhouettes is 0.52 px off because its threshold is 200 (0.11 px at 128). Still weak, by the same numbers: rounded rectangles and other line-and-arc outlines take 12 to 16 anchors (the fitter does not split lines from arcs), blurred and scanned polygons lose corners, hairlines under half a pixel are lost to the threshold, aliased art is about 0.25 px off, a scan's uneven paper splits into tones when more colours are asked for than the art has, stroke junctions stay at their skeleton pixels, a three-stop gradient in a small or scanned disc is not found, radial gradients stay bands (a draft, #1849, traces them; the documented option is for linear ones, so it waits for a decision), near-regular polygons a few dozen pixels across are made regular with Shapes (up to 0.5 px off), and aliased stroked lines are 0.8 px off at Line truncated
@@ -1619,13 +1701,14 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **A point on a mesh's outline is on the mesh:** a point exactly on the outline of a gradient mesh (within a millionth of a point) locates on the edge it lies on, on all four sides alike and with no tolerance, as it already did on the top and left edges, so `object.mesh.addLine` and Create Gradient Mesh `at` a point on the bottom or right edge add their lines there instead of reporting the point outside, and the Eyedropper samples the mesh's color there; a point just outside still needs `tolerance`. Tests: `mesh_locate_takes_a_point_on_any_side_of_the_outline` in `crates/doc/src/live.rs`, `mesh_add_line_exactly_on_the_edge_needs_no_tolerance` in `crates/engine/src/tests/live.rs`. Scores and hours unchanged.
- **Several mesh points at once (#4207, #4208, #4170):** the Mesh tool and Direct Selection pick several points of a gradient mesh or mesh envelope: Shift-click adds a point or takes a picked one away, Direct Selection's marquee picks the points inside it (Shift toggles them) and selects their meshes, and its click on a mesh line picks the line's two ends and one inside a patch the four points around it. The picked points show filled; dragging one moves them all as one undo step and the arrow keys nudge them (`object.mesh.movePoints {id, points, dx, dy}` or `{items, dx, dy}`), and a click on one of several picked points picks it alone. A solid fill colour (`paint.setFill`: Color panel, Swatches, Eyedropper) recolours every picked point, and the Transparency panel's Opacity fades them instead of the object, the panel showing their opacity (blank when it differs); `object.mesh.setPointColor` takes `points` or `items`. Public reference: [Edit mesh objects](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/create-and-edit-meshes/edit-mesh-objects.html) (Shift selects multiple mesh points; a fill colour colours the selected point), [Macworld, gradient mesh](https://www.macworld.com/article/202693/gmesh2.html) (Direct Selection: a mesh line selects the points at both ends, a patch the points around it, Shift-click adds or removes points), [Peachpit](https://www.peachpit.com/articles/article.aspx?p=1638270) (each mesh point can have its own colour or transparency). Tests: `shift_clicks_pick_mesh_points_that_drag_and_nudge_together` and `direct_selection_picks_mesh_points_by_marquee_line_and_patch` in `crates/tools/src/meshedit.rs`, `picked_mesh_points_take_the_fill_opacity_and_drag_together` in `crates/engine/src/tests/editcolors.rs`, `mesh_points_move_and_colour_together` in `crates/engine/src/tests/live.rs`. Scores and hours unchanged.
- **Picked mesh points in the panels** (VectorCraft's own rule): with points of a gradient mesh picked by the Mesh tool, Direct Selection or the Lasso, the Fill proxy, the Color panel and the Color Wheel show the first picked point's color, so their sliders keep the color a drag sets, and "?" shows when the picked points' colors differ. The Control bar shows the first picked point's opacity. Tests: `the_fill_proxy_shows_the_picked_mesh_points_color`, `the_fill_proxy_follows_where_the_fill_goes_with_an_appearance_row_active` and `the_fill_proxy_counts_picked_mesh_points_beside_other_objects` in `crates/engine/src/tests/xform.rs`, `picked_mesh_points_are_the_color_the_panel_shows_and_edits` in `crates/ui-egui/src/panels/color/tests.rs`, `picking_mesh_points_shows_their_opacity` in `crates/ui-egui/src/panels/transparency.rs`. Scores and hours unchanged.
- **The Eyedropper samples into picked mesh points (#8090):** mesh points picked with the Mesh tool, Direct Selection or the Lasso stay picked after switching to the Eyedropper and go back to one of those tools chosen next, and a click or Shift-click on an image or other art then samples the color under the pointer into every picked point as one undo step, leaving the mesh's other points and its appearance as they were. VectorCraft's own rules: a plain click on vector art samples its color into the points instead of copying its appearance, other selected objects keep their paint, and a click on a mesh with points picked works as before. Public references: [Edit mesh objects](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/create-and-edit-meshes/edit-mesh-objects.html) (a mesh point is recolored by selecting it and choosing a fill color), [Appearance attributes](https://helpx.adobe.com/illustrator/using/appearance-attributes.html) (Shift-click samples the color from a part of a mesh object or a placed image and applies it to the selected fill). Tests: `picked_mesh_points_take_the_eyedropper_sample` in `crates/engine/src/tests/eyedropper.rs`, `picked_mesh_points_take_the_color_a_click_samples` in `crates/tools/src/xform/eyedropper.rs`, `mesh_point_tools_take_back_the_eyedroppers_picks` in `crates/tools/src/meshedit.rs`. Scores and hours unchanged.
- **Image Trace Flat Logo mode:** a fourth mode beside Black and White, Grayscale and Color, for flat-colour logos. Each pixel is read as a blend of the logo's colours (found automatically or named), the blend is interpolated smoothly and every outline is placed where two colours are equally present, so edges are accurate to a fraction of a pixel. Outlines are then cleaned: corners the blur rounded are put back, near-straight runs and near-circular arcs become exact lines and arcs, the rest is fitted with as few Béziers as the tolerance allows, touching colours overlap by a hair so no gap opens, and an outline that strays from the raw contour is fitted plainly instead. Gradients and photos are refused with advice to use Color. Line art whose only solid area is white paper (strokes a pixel or two wide) takes its colours from the strokes' cores, with the lighter shades along a stroke's anti-aliased edge folded into its ink; a page whose ink (a channel at least 48 below white) covers under 1% of it traces to nothing, as blank paper does. *Measured* (a local experiment, not run in CI): a flat-colour logo's vector original was rendered down to a soft 199 × 100 px transparent PNG, traced, and the result compared with the original at 1600 px wide. The built-in colour presets (6 Colors, 16 Colors, High Fidelity Photo, Low Fidelity Photo) had a mean edge error of 2.5 to 3.4 px and region overlap of 0.88 to 0.91; Flat Logo had 0.78 px and 0.966 (0.48 px and 0.975 from a crisp source), in about 0.1 s. Limits: flat-colour art only; needle-thin sharp tips are shortened by about 1.7 source pixels because the blur erases them; it works at no more than 1024 px on the long side (larger images are averaged down first); only one logo family has been scored against a vector original.
- **Image Trace, Flat Logo named colors only:** with `logoColors` named, `"logoWhite": false` traces those colors only, so white areas take the nearest of them and no white is added; a named white is kept, and enclosed transparent areas stay holes; code-drawn tests in `crates/trace` and `crates/engine`.
- **Image Trace, Flat Logo flat-art check with named colors:** with `logoColors` named, whether the image is flat art is judged by its own colors, as many as are named, with white, or as the Colors setting gives, whichever is more. Named colors 20 levels off a flat badge's colors still trace it, a hatch on a light ground gives the same result with close and far named colors, a gradient's refusal score does not depend on how far the named colors are from it, and areas of colors that were not named are traced in the named colors instead of being refused; code-drawn tests in `crates/trace`.
- **Image Trace, Flat Logo with a color between two others:** an anti-aliased edge pixel between black and white is read as a blend of black and white, not of black and a gray that lies between them, when the flat areas around it and the pixels beside it show that edge, so a black disc beside a gray square on white, with sharp edges or edges blurred by up to about half a pixel, traces with one gray path, the square, instead of the square plus 8 to 24 gray slivers around the disc with the colors found or named exactly; on edges blurred by 1 to 3 pixels, the pixel also counts as on that edge when paths of up to 5 steps through pixels that keep getting darker and lighter reach past the gray both ways, and black and white then lie as near as the steps to them, so the same disc and square trace with one gray path at blurs of 1 to 2 pixels, where up to 33 gray paths were traced before (at a blur of 3 pixels with the colors named, a gray of 200 leaves 4 slivers with no area and a light gray of 230 leaves 8 small slivers, against 11 and 14 gray paths before; pixel noise of a level or more can still leave gray slivers); with sharp edges, gray strokes two and three pixels wide beside black stay gray (a soft-edged gray stroke about two pixels wide that touches black traces as black and white, and a short one about three pixels wide can lose most or all of its gray); on edges blurred by a pixel or more, a soft-edged gray band up to 4 pixels wide along black traces as black and white at blurs of 1.5 and 2 pixels, a soft-edged gray stroke 2 pixels from black can lose some or all of its gray and one 4 pixels away a few pixels, and a soft-edged gray stroke running out of black loses 3 or 4 pixels where it meets black; a one-pixel gray line of at least 13 touching pixels between black and white stays gray (a shorter one, or one that falls between pixels or is blurred, traces as black and white); code-drawn tests in `crates/trace`.
- **Image Trace, Flat Logo with a color between two others:** an anti-aliased edge pixel between black and white is read as a blend of black and white, not of black and a gray that lies between them, when the flat areas around it and the pixels beside it show that edge, so a black disc beside a gray square on white, with sharp edges or edges blurred by up to about half a pixel, traces with one gray path, the square, instead of the square plus 8 to 24 gray slivers around the disc with the colors found or named exactly; on edges blurred by 1 to 3 pixels, the pixel also counts as on that edge when paths of up to 5 steps through pixels that keep getting darker and lighter reach past the gray both ways, and black and white then lie as near as the steps to them, so the same disc and square trace with one gray path at blurs of 1 and 2 pixels and with at most 4 slivers of up to 3 pixels in a light gray at 1.5 pixels, where up to 33 gray paths were traced before (at a blur of 3 pixels with the colors named, a gray of 200 leaves 4 slivers with no area and a light gray of 230 leaves 8 small slivers, where 11 and 14 gray paths were traced before; pixel noise of a level or more can still leave gray slivers); when the first step toward black or white already comes to that color, the path the other way stops at a pixel of the gray, so with edges blurred by 0.6 pixels a gray band 3 to 8 pixels wide along black traces gray at no fewer than 4 of every 5 of its pixel centers; with sharp edges, gray strokes two and three pixels wide beside black stay gray (a soft-edged gray stroke about two pixels wide lying along black traces as black and white, and a short one about three pixels wide can lose most or all of its gray); on edges blurred by a pixel or more, a soft-edged gray band up to 4 pixels wide along black traces as black and white, with gray at no more than 1 of every 16 of its pixel centers, at blurs of 1.5 and 2 pixels, a light gray stroke 2 pixels wide and 2 pixels from black, blurred by 1.5 pixels, traces gray at about 10 of the 34 pixel centers along its middle and one 4 pixels away at about 25, and a soft-edged gray stroke running out of black, blurred by 1 or 1.5 pixels, loses 3 or 4 of the 16 pixel centers along its middle nearest black; a one-pixel gray line of at least 13 touching pixels between black and white stays gray (a shorter one, or one that falls between pixels or is blurred, traces as black and white); code-drawn tests in `crates/trace`.
- **Image Trace, Flat Logo with a color beyond both colors of an edge:** an edge pixel between a gray panel and a charcoal disc on a paler gray ground is read as a blend of the panel and the disc, not of the ground and the disc, when the pixels beside it lie on each side of it, none lies past the panel toward the ground, and lighter pixels lead from it to the panel's color or to a flat area of the panel, so the disc traces with three paths, one per color, with the colors found or named, instead of with 28 slivers of the ground around it when its edges are sharp and one sliver when they are blurred by 0.7 pixel (an edge blurred by a pixel or more can still leave slivers of the ground); the pixels of a pale line on the disc, one pixel wide, blurred over three pixels or falling between two pixels, and the edge of a gap of the ground's color between the disc and the panel keep the ground in their blends; code-drawn tests in `crates/trace`.
- **Image Trace, Keep Colors:** `"keepColors": ["#rrggbb", …]` traces only the palette colors near a listed color (Abutting: each with the paths the trace of every color gives it; Overlapping: not reaching under the colors left out), in Black and White, Grayscale and Color; code-drawn tests in `crates/trace` and `crates/engine`.
- **Advanced art:** live Blends (steps/distance/smooth colour, editable spine, anchor-targeted Blend tool, faithful interpolation, knockout), Envelope Distort (warp/mesh/top object, Reset, full Envelope Options, mesh handles, Edit Contents; type, images, symbols, gradients, patterns and appearance distorted everywhere), Liquify tools with options and pen pressure, Puppet Warp with rotating pins, Perspective Grid with presets, movable planes and projected type (choosing a perspective tool shows the grid; Hide Grid hides it with the tool still chosen), Gradient Mesh, Shape Builder (stroke-only open paths and lines cut the regions they cross and enclose regions of their own, and regions they bound merge without seams where the lines cross at rounded coordinates (#893); filled open paths count as closed; erase mode while Alt/Option is held: a minus pointer, red highlights of what will go, a click or drag deletes the regions touched, the pieces of open lines and the edges (outline pieces between the points where paths meet, opening their paths there) it passes over, one undo step, `shapeBuilder.merge {erase}` and `shapeBuilder.regions` edges over MCP), Live Paint (every path an edge, open lines included), Image Trace (12 presets, colour layers traced in parallel; a trace past two million anchor points is refused with advice rather than running out of memory, an image over 64 megapixels is traced scaled down to that size (aspect kept, paths at the image's own size) and one over 192 megapixels is refused, and a selection too large to outline shows its bounds (#525); Object › Image Trace › Make and Make and Expand trace at once with the Default preset, #543; with an image selected the Control bar and the Properties panel show Image Trace, whose arrow traces with any preset, Mask (`object.maskImage`: a clipping path on the image's outline, selected so its handles crop), Crop Image (a crop box on the image, starting on its part over the artboard, dragged by its handles or inside it, the outside dimmed, with X/Y/W/H, Apply and Cancel in the Control bar, Enter and Escape, #734; an image that isn't turned or skewed, isn't CMYK and can be read at its recorded size is cut from its own pixels when the crop edges fall on its pixel grid, copied as they are without resampling; any other image is drawn, #5534; `object.cropImage {rect}` for agents, `{trim: true}` cuts an image to its pixels that aren't fully transparent, pixel for pixel) and Embed or Unembed in place of Fill and Stroke; with an Image Trace object selected, its Preset (choosing another traces again), View, the Image Trace panel and Expand, plus Release in Properties; the five View modes (Tracing Result, with Outlines, Outlines, Outlines with Source Image, Source Image) redraw a trace on screen without tracing again, are saved with it and `imageTrace.setView` sets them, while exports and Expand keep the result; the panel's Advanced section is a header that stays open or closed as it was left (part of #641); Color mode's Palette: Limited, Full Tone (as many colours as the tones need, Less … More), Automatic (flat art with its own colours, else Full Tone; a heuristic) and Document Library (the most used colours of the document's swatches or a swatch library, filled with the swatch colours as they are), part of #641; Advanced › Create: Fills and/or Strokes, where lines up to the Stroke width trace as stroked centre lines (distance transform, thinning, a skeleton graph with spurs pruned, curve fitting; one width per line; without Fills, wider areas become stroked outlines), part of #641), pattern swatches with pattern editing mode, live Repeat (radial/grid/mirror). A single selected mirror repeat shows a prominent axis with a center move handle and two rotation handles. Drag the line or center to change spacing, or an end to change angle; Shift snaps rotation to 45°. The original artwork stays in place, the reflected copy previews live, Escape cancels and each drag takes one undo step through `object.repeat.options`. Controls follow zoom/view rotation and hide with edges or the bounding box. Engine and headless canvas regressions passed for gestures, history and visibility; native move, rotation and Escape screenshots were reviewed. [Public mirror-repeat reference](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/create-and-edit-patterns/set-mirror-repeat-options.html). A single selected grid repeat shows a handle below the grid for rows, one right of it for columns and one past its bottom-right corner for both, and sliders between its first two columns and rows for the horizontal and vertical spacing; the source keeps its size, each drag is one undo step and Escape cancels it ([public grid-repeat reference](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/create-and-edit-patterns/set-grid-repeat-options.html), #2691). Object › Expand turns radial, grid and mirror repeats into groups of their instances (#1765, #1756).
- **Advanced art:** live Blends (steps/distance/smooth colour, editable spine, anchor-targeted Blend tool, faithful interpolation, knockout), Envelope Distort (warp/mesh/top object, Reset, full Envelope Options, mesh handles, Edit Contents; type, images, symbols, gradients, patterns and appearance distorted everywhere), Liquify tools with options and pen pressure, Puppet Warp with rotating pins, Perspective Grid with presets, movable planes and projected type (choosing a perspective tool shows the grid; Hide Grid hides it with the tool still chosen), Gradient Mesh, Shape Builder (stroke-only open paths and lines cut the regions they cross and enclose regions of their own, and regions they bound merge without seams where the lines cross at rounded coordinates (#893); filled open paths count as closed; erase mode while Alt/Option is held: a minus pointer, red highlights of what will go, a click or drag deletes the regions touched, the pieces of open lines and the edges (outline pieces between the points where paths meet, opening their paths there) it passes over, one undo step, `shapeBuilder.merge {erase}` and `shapeBuilder.regions` edges over MCP), Live Paint (every path an edge, open lines included), Image Trace (12 presets, colour layers traced in parallel; a trace past two million anchor points is refused with advice rather than running out of memory, an image over 64 megapixels is traced scaled down to that size (aspect kept, paths at the image's own size) and one over 192 megapixels is refused, and a selection too large to outline shows its bounds (#525); Object › Image Trace › Make and Make and Expand trace at once with the Default preset, #543; with an image selected the Control bar and the Properties panel show Image Trace, whose arrow traces with any preset, Mask (`object.maskImage`: a clipping path on the image's outline, selected so its handles crop), Crop Image (a crop box on the image, starting on its part over the artboard, dragged by its handles or inside it, the outside dimmed, with X/Y/W/H, Apply and Cancel in the Control bar, Enter and Escape, #734; an image that isn't turned or skewed, isn't CMYK and can be read at its recorded size is cut from its own pixels when the crop edges fall on its pixel grid, copied as they are without resampling; any other image is drawn, #5534; `object.cropImage {rect}` for agents, `{trim: true}` cuts an image to its pixels that aren't fully transparent, pixel for pixel) and Embed or Unembed in place of Fill and Stroke; with an Image Trace object selected, its Preset (choosing another traces again), View, the Image Trace panel and Expand, plus Release in Properties; the five View modes (Tracing Result, with Outlines, Outlines, Outlines with Source Image, Source Image) redraw a trace on screen without tracing again, are saved with it and `imageTrace.setView` sets them, while exports and Expand keep the result; the panel's Advanced section is a header that stays open or closed as it was left (part of #641); Color mode's Palette: Limited, Full Tone (as many colours as the tones need, Less … More, split into at least one color per step of Color detail before colors that look alike merge), Automatic (flat art with its own colours, else as many as the tones need; a heuristic) and Document Library (the most used colours of the document's swatches or a swatch library, filled with the swatch colours as they are), part of #641; Advanced › Create: Fills and/or Strokes, where lines up to the Stroke width trace as stroked centre lines (distance transform, thinning, a skeleton graph with spurs pruned, curve fitting; one width per line; without Fills, wider areas become stroked outlines), part of #641), pattern swatches with pattern editing mode, live Repeat (radial/grid/mirror). A single selected mirror repeat shows a prominent axis with a center move handle and two rotation handles. Drag the line or center to change spacing, or an end to change angle; Shift snaps rotation to 45°. The original artwork stays in place, the reflected copy previews live, Escape cancels and each drag takes one undo step through `object.repeat.options`. Controls follow zoom/view rotation and hide with edges or the bounding box. Engine and headless canvas regressions passed for gestures, history and visibility; native move, rotation and Escape screenshots were reviewed. [Public mirror-repeat reference](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/create-and-edit-patterns/set-mirror-repeat-options.html). A single selected grid repeat shows a handle below the grid for rows, one right of it for columns and one past its bottom-right corner for both, and sliders between its first two columns and rows for the horizontal and vertical spacing; the source keeps its size, each drag is one undo step and Escape cancels it ([public grid-repeat reference](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/create-and-edit-patterns/set-grid-repeat-options.html), #2691). Object › ELine truncated
While Crop Image shows its box, the Control bar also sets the cropped image's resolution (PPI: a list of 72, 96, 150, 200 and 300 ppi with the ones above the image's own disabled, or a typed value; at most the image's own, or 300 ppi for a linked image ([Crop Image](https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf#page=352))), a reference point that X and Y name and that W and H resize about, and a link that keeps W and H in proportion; `object.cropImage {ppi}` resamples the cut pixels and refuses a resolution above the limit, and `tool.setOption` sets `ppi`, `reference` and `linked` ([Crop images](https://helpx.adobe.com/illustrator/desktop/manage-objects/edit-objects/crop-images-in-illustrator.html)). The list's resolutions and the default (the image's own resolution, the center, unlinked) are VectorCraft's own.
Choosing the Blend tool again while it is active (its toolbar button, W or `tool.select`) finishes the blend: the object clicked first is dropped and the next click no longer adds to the blend just made, so the click after it starts a new blend ([Blending objects](https://web.archive.org/web/20241217212108/https://helpx.adobe.com/illustrator/using/blending-objects.html)).
Window › Blend exposes easing Type, Ramp and independent color Shift through `object.blend.options`.
@@ -1637,11 +1720,13 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
The four polynomial distributions are original approximations of the public description, not measured
numeric parity. See [Blend panel overview](https://helpx.adobe.com/illustrator/desktop/manage-colors/apply-transparency-and-blending/blend-panel-overview.html).
A blend in a `.ai` or EPS opened from its editing data keeps a Specified Distance spacing with its distance ([Blend Options](https://helpx.adobe.com/illustrator/desktop/manage-colors/apply-transparency-and-blending/blend-options-overview.html)) where VectorCraft lays out as many steps between each pair of keys as the file draws, in the same places and colors. A Smooth Color blend opens live only where VectorCraft's own Smooth Color step count equals the drawn steps, and VectorCraft often counts a different number. A blend that VectorCraft doesn't lay out as drawn keeps its drawn steps with a note (`import::ai::tests::a_blend_keeps_its_spacing`, `a_blend_of_three_keys_keeps_its_distance_between_each_pair`, `a_blend_whose_spacing_doesnt_lay_out_its_steps_keeps_them`).
Such a blend also keeps the orientation its record names (Align to Page or Align to Path) where that orientation lays the drawn steps out in place, at their sizes and with their outlines, and a blend written with no spine part, its keys named in their order, opens with no spine of its own (`import::ai::blend::tests::the_records_orientation_is_kept_where_both_lay_out_alike`, `the_records_orientation_must_lay_the_steps_out_turned_as_drawn`, `import::ai::tests::a_blend_with_no_spine_written_runs_straight_between_its_keys`).
- Create Strokes uses exact squared Euclidean distances and Guo–Hall thinning in bounded per-blob crops. Maximal-disc pruning, split-crossing merges and degree-two joins simplify its skeleton graph. The whole-blob width rule and ink fitting remain; 46 code-drawn inputs measure ends and junctions in [`image-trace-quality.md`](image-trace-quality.md#centre-lines). Junction degrees measure 44/45 correct in each input variant; remaining spurs are recorded. This is a measured skeleton improvement; the Image Trace score, missing per-feature selection and width controls, and estimates remain unchanged.
- Create Strokes decides stroke or fill per feature, as the [help page](https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/image-trace-panel-options.html) describes the Strokes width: the widest feature of the image that can become a stroke. A shape wider than Stroke somewhere keeps as its area every disc wider than Stroke that fits in it, and each piece outside those discs that reaches out of them at least one and a half times its own width (and 3 px) is traced as a stroked center line, its end at the area carried to the cut so the line's cap closes the join. Corners and edge slivers stay in the area. Which pieces count as features is VectorCraft's own rule. Each line still has one width; without Fills, the area is a 1 px outline as before. Tests: `thin_features_of_a_wide_shape_are_strokes_and_its_body_a_fill`, `wide_shapes_without_thin_features_stay_one_fill` and `distances_to_seeds_equal_brute_force` in `vectorcraft-trace`. The Image Trace score and estimates are unchanged.
- The ignored centre-lines class measures that split on a mixed-width body scene: one disc with arms of 2, 3 and 5 px, at Stroke 6 px, traces as three stroked paths and one filled path in both the anti-aliased and hard input, with 100.0% of the arms' center samples found and 99.3% (anti-aliased) and 98.3% (hard) of the disc's pixels filled ([quality notes](image-trace-quality.md#centre-lines)). Test: `mixed_width_body_is_one_shape_traced_as_a_fill_and_strokes` in `vectorcraft-trace`. The Image Trace score and estimates are unchanged.
Object › Live Paint › Merge adds the other selected paths and Live Paint groups to the bottom selected Live Paint group ([Live Paint groups](https://web.archive.org/web/20241230205225/https://helpx.adobe.com/illustrator/using/live-paint-groups.html)), which keeps its id, the paint of its faces and edges, and its name, lock, visibility, transparency, appearance, opacity mask and graphic style link. Object › Live Paint › Make with a Live Paint group selected, and a Live Paint Bucket click on a selected path beside a selected Live Paint group, add the paths to that group the same way. Make, Merge and the Live Paint Bucket take paths, compound paths and groups of them; with type, an image or another object among the selection they report that it has to be converted to paths first and change nothing, as type and raster images can't go into a Live Paint group directly ([Create Live Paint groups](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/learn-painting-basics/create-live-paint-groups.html)); before, such an object went among the group's hidden sources and vanished from the canvas. Evidence: `tests_build::live_paint_refuses_type_and_images_and_changes_nothing`.
Paths drawn in an isolated Live Paint group join it when isolation mode ends, as the [help page](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/learn-painting-basics/modify-live-paint-groups.html) describes: drawing paths in the isolated group and pressing Esc adds them. `object.exitIsolation` (Esc, the Control bar and isolation bar exits, a double-click outside, the Layers panel and the canvas context menu) adds the shown, unlocked paths, compound paths and groups of them drawn in the group as Merge does, in one undo step, and `object.isolate` on a level outside the group does the same. As VectorCraft's own rules, type, images, hidden and locked objects drawn there, and groups holding one, stay in the group as they are, and Gap Options, Merge and Release keep them; an exit with nothing drawn records no undo step. Evidence: `tests::build::{live_paint_isolation_adds_drawn_paths_on_exit, live_paint_isolation_adds_only_paths_it_takes, live_paint_isolation_leaves_a_group_holding_a_locked_path, live_paint_isolation_adds_drawn_paths_when_isolating_a_level_outside, live_paint_isolation_adds_a_drawn_group_isolated_inside_it, live_paint_isolation_keeps_art_named_like_its_parts, live_paint_keeps_type_drawn_in_it_through_gap_options_merge_and_release}`.
With the Live Paint Bucket selected, Alt-click on vector art samples its fill, stroke and stroke weight into the paint defaults ([Paint with the Live Paint Bucket tool](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/learn-painting-basics/paint-with-the-live-paint-bucket-tool.html)). On a placed image it samples the image pixel as a solid fill with no stroke. Alt+Shift-click samples only the color under the pointer, including an intermediate gradient color or image pixels, into the active fill or stroke ([Default keyboard shortcuts](https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html)). Neither click paints or changes the selection or selected art, and the next Bucket click paints with the sampled paint. Evidence: `tests_build::live_paint_bucket_alt_sample_paints_next_face_without_changing_selection`.
Double-clicking the Live Paint Bucket opens Live Paint Bucket Options ([Paint with the Live Paint Bucket tool](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/learn-painting-basics/paint-with-the-live-paint-bucket-tool.html)): Paint Fills (on) and Paint Strokes (off) set whether a click paints faces, edges or both, Highlight turns the outline of the face or edge under the pointer on or off, and Color and Width set it (red and 4 px by default). Faces are outlined at the Width and edges at half of it, as the page says faces are highlighted with a thick line and edges with a thin line. With both on, a click paints the edge within 4 px of the pointer, else the face, and Shift switches to Paint Fills only; with one on, Shift switches to the other. The options last across tool switches and are saved with the preferences (`tool.setOption {tool: "livePaintBucket"}`). Evidence: `builder::tests::{bucket_options_choose_what_a_click_paints, bucket_options_set_the_highlight, bucket_highlights_an_edge_thinner_than_a_face}`, `dialogs::live_paint_bucket::tests::double_clicking_the_tool_opens_its_options_and_ok_sets_them`.
Live Paint Bucket double-click and triple-click, as [the help page](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/learn-painting-basics/paint-with-the-live-paint-bucket-tool.html) describes them: a double-click on a face fills it and the faces reached across edges that draw no stroke, and on an edge it paints the edges joined to it with the same stroke; a triple-click fills every face of the group that has the face's fill, or paints every edge that draws with the edge's stroke paint, each with the bucket's paint (`livePaint.fill` and `livePaint.strokeEdge` `{scope: "connected" | "samePaint", match?}`; `pointer_gesture` and `ui.pointer` take `tripleclick`). Each click paints as it arrives, as its own undo step when it changes a paint, and the paint compared is the one the face or edge had before the first of its clicks that painted it, including a click whose drag or release crossed it; a first click that made the Live Paint group counts when the face it filled is the clicked face. With Space held for the view tools, a click, double-click or triple-click paints nothing and no face or edge is outlined, and with Cmd/Ctrl held a double-click or triple-click paints nothing. Which faces and edges join and which paints match are VectorCraft's own rules. Evidence: `tests_build::{live_paint_bucket_double_click_floods_across_unstroked_edges, live_paint_bucket_double_click_floods_curved_and_narrow_faces, live_paint_bucket_double_click_floods_across_hidden_edges_and_past_gaps, live_paint_bucket_triple_click_fills_every_face_of_the_same_fill, live_paint_bucket_triple_click_after_a_release_across_an_edge_matches_the_fill_before, live_paint_bucket_triple_click_released_from_another_face_matches_the_fill_before, live_paint_bucket_triple_click_after_making_the_group_across_an_edge_matches_the_made_fill, live_paint_bucket_triple_click_after_making_the_group_under_an_unfilled_path_matches_the_made_fill, live_paint_bucket_triple_click_after_merging_across_an_edge_matches_the_face_fill, live_paint_bucket_triple_click_after_merging_two_groups_matches_the_merged_fill, live_paint_bucket_triple_click_after_a_merge_splits_a_face_matches_the_part_fill, live_paint_bucket_triple_click_after_merging_matches_the_fixed_gradient, live_paint_bucket_triple_click_after_making_the_group_matches_the_made_fill, live_paint_bucket_double_and_triple_click_paint_joined_and_same_stroke_edges, live_paint_bucket_double_click_across_a_junction_paints_the_joined_edges, live_paint_bucket_double_click_released_back_on_the_first_edge_paints_the_joined_edges, live_paint_bucket_edge_double_click_after_filling_a_face_paints_the_joined_edges, live_paint_bucket_triple_click_with_a_cmd_press_between_matches_the_fill_before, live_paint_scope_and_match_are_checked}`, `builder::tests::{bucket_double_and_triple_click_widen_what_a_click_paints, bucket_triple_click_after_making_the_group_on_another_face_matches_its_own_face, bucket_triple_click_with_a_click_on_another_face_between_matches_the_first_fill, bucket_triple_click_with_a_view_tool_press_between_matches_the_first_fill, bucket_highlights_nothing_with_space_held}`, `canvas::tests::bucket_triple_click_with_a_view_tool_press_between_matches_the_fill_before`, `tests::build::{live_paint_scoped_fill_and_stroke_skip_parts_with_the_paint, live_paint_bucket_cmd_double_and_triple_click_paint_nothing}`, `tests::livepaint::{a_triple_click_fills_every_face_of_the_same_fill, clicks_with_space_held_paint_nothing}` (MCP).
@@ -1663,6 +1748,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
When the object the Blend tool picked first is deleted or undone away before the second click, the next click on an object picks that object first instead of doing nothing. Regression tests: `blend_tool_picks_again_when_its_first_pick_is_gone` in `meshblend.rs` and `the_blend_tool_picks_again_when_its_first_pick_is_deleted` in `tests/blendopts.rs`.
Window › Blend opens the Blend panel: Make, the selected blend's Spacing and Orientation (with no blend selected, the options new blends start with), Reverse Front to Back, Reverse Spine, Replace Spine, Expand and Release, each running its Object › Blend command. Make is dimmed until two or more objects are selected. Spacing and Orientation are dimmed until a blend or two or more objects are selected, and the other buttons are dimmed until a blend is selected.
The Blend panel's Create Spine menu (Auto, Always, Never; `object.blend.createSpine`) sets whether new blends get a spine, from the Blend tool, Make and `object.blend.make` alike ([Blend panel overview](https://helpx.adobe.com/illustrator/desktop/manage-colors/apply-transparency-and-blending/blend-panel-overview.html)). Auto and Always give every new blend a straight spine, as before; Never makes blends without one, which keep their steps on the straight lines between the keys, have Type and Ramp dimmed, refuse Reverse Spine and spine edits, release without a spine path, and get a spine from Replace Spine. The setting is kept with the preferences and leaves blends already made as they are; Auto as the starting value and keeping the setting across sessions are VectorCraft's own rules. Builds on #5177 by adambelis. Evidence: `tests::blendopts::{create_spine_sets_whether_new_blends_get_a_spine, a_blend_without_a_spine_has_none_to_edit_reverse_ease_or_release, whether_a_blend_has_a_spine_is_saved_and_old_blends_have_one}` and `panels::tests_blend::create_spine_sets_what_new_blends_get_whatever_is_selected`.
Blend Options on several selected blends (the Blend Options dialog, the Blend panel's Type, Ramp and Shift, and `object.blend.options`) sets only the values given or set in the dialog, and each blend keeps its own spacing, orientation, type, ramp and shift for the rest instead of taking the first blend's; a spacing mode given without a count keeps the count of a blend already in that mode. `object.blend.options {id}` edits that blend alone; a hidden or locked blend, an object that is not a blend, a value out of range and an unknown orientation are errors that change nothing, and a call that changes nothing records no undo step. A drag of the panel's Ramp or Shift slider previews on the canvas and records one undo step on release, and Type, Ramp and Reverse Spine are dimmed while a selected blend, or the blend of a key selected with Direct Selection, has no spine. Builds on #8022 by ruchirguitar. Evidence: `tests::blendopts::{options_on_several_blends_set_only_the_values_given, options_with_an_id_edit_that_blend_alone, options_that_change_nothing_or_are_refused_record_no_undo_step}`, `dialogs::blend_options::tests::on_several_blends_ok_sets_only_the_fields_changed` and `panels::tests_blend::{a_ramp_or_shift_drag_is_one_undo_step, ramp_and_shift_edit_every_selected_blend_and_keep_their_other_options, ramp_is_dimmed_while_a_selected_blend_has_no_spine, ramp_and_reverse_spine_are_dimmed_while_a_selected_key_belongs_to_a_blend_with_no_spine}`.
With the Blend tool, Escape drops the object clicked first and stops the next click adding to the blend just made, so the next click picks a new first object; the document and the selection stay as they are. Regression tests: `escape_drops_the_blend_tools_first_pick` in `meshblend.rs` and `tests/blendopts.rs`.
Objects on Path (#2545): a click with the Objects on Path tool (in Edit Toolbar's Modify section and the Blend tool's flyout; Object › Objects on Path › Attach and the context menu with two or more objects selected choose it) attaches the selected objects to the path clicked, open or closed, in an Objects on Path group with the path at its bottom. The objects go along the path column by column from left to right, spread evenly from its first anchor (the last one sits on the end of an open path), each turned to the path at its attachment point; Pivot and Rotate set where each one attaches and how far it tilts (`object.objectsOnPath.attach`, `object.objectsOnPath.options`), and with Objects on Path groups selected the Properties panel's Objects on Path Options section shows them as a nine-point Pivot grid and a Rotate field with common angles, each change one undo step for every selected group. Editing the path moves the objects, an object moved on its own goes back, objects moved into or out of the group in the Layers panel join or leave the path, and Object › Objects on Path › Expand leaves a plain group. The group saves and reopens live and exports as plain art. With one Objects on Path group selected, the Selection and Objects on Path tools show the Rotate All widget beside its first object: dragging it turns every object about its attachment point by the angle the pointer turns, adding it to the group's Rotate in one undo step, in 15° steps with Shift ([Objects on Path](https://helpx.adobe.com/illustrator/using/objects-on-path.html)). Detach is in its own entry below.
Objects on Path Space widget: with one Objects on Path group of two or more objects selected, the Selection and Objects on Path tools show a square handle beyond its last object; dragging it along the path, round its bends, sets the distance between the objects' attachment points in one undo step, the first object staying where it is, and with Alt (Option on macOS) the objects spread from both ends toward the center; the distance shows next to the pointer during the drag, in the document's units ([Rearrange and edit objects on a path](https://helpx.adobe.com/illustrator/desktop/manage-objects/arrange-objects/rearrange-and-edit-objects-on-a-path.html), [Objects on Path](https://helpx.adobe.com/illustrator/using/objects-on-path.html)). The group keeps the distance (`object.objectsOnPath.options {spacing, start}`) through Pivot and Rotate changes, path edits, copies, saving and reopening, and scales it with the group; by default (`"auto"`) the objects are spread evenly as before. Evidence: `objects_on_path::tests::{space_sets_the_distance_between_the_stops, space_on_a_closed_path_wraps_at_the_first_anchor_and_stops_short_of_the_first_object}` in `crates/doc`, `tests::objects_on_path::space_sets_the_distance_between_the_objects_in_one_undo_step` in `crates/engine`, `objects_on_path::tests::dragging_the_space_widget_spaces_the_objects_from_the_first_one` in `crates/tools`.
@@ -1672,9 +1758,11 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
Double-clicking the Objects on Path tool opens Objects on Path Tool Options ([Objects on Path](https://helpx.adobe.com/illustrator/using/objects-on-path.html)): the nine-point Pivot grid and the Rotate field set the attachment point and angle of the objects attached next, and groups already attached keep theirs; Reset puts the center and 0° back. Save keeps the options across tool switches and saves them with the preferences (`tool.setOption {tool: "objectsOnPath"}`).
- **Paint and appearance (M3):**
- **CSS swatch libraries:** fractional linear and radial gradient stop positions are preserved, so nearby stops such as 12.5% and 12.890625% remain distinct instead of collapsing to 13%. Reference: [CSS Images 3 color stops](https://www.w3.org/TR/css-images-3/#color-stop-syntax). The original synthetic regression is `palette_io::tests::css_preserves_fractional_gradient_stop_positions` in `crates/color/src/palette_io.rs`. Scores and hours are unchanged.
- **CSS swatch libraries:** a gradient swatch's off-center midpoints and the curve of a Perceptual, Hue Clockwise or Hue Counterclockwise gradient are written as stops of their own, each with its color and opacity, also on repeated, reflected and mirrored conic swatches, so the CSS value draws the colors the swatch has. CSS mixes hex colors evenly in sRGB between two stops ([CSS Color 4 interpolation space](https://www.w3.org/TR/css-color-4/#interpolation-space), [CSS Images 3 gradient line](https://www.w3.org/TR/css-images-3/#coloring-gradient-line)). Regression: `palette_io::tests::css_gradient_swatches_draw_their_midpoints_and_curves`.
- **Swatches:** names follow the colour model and are unique; Swatch Options (process/spot, Global, Gray/RGB/HSB/CMYK/Web, live preview); editing a global or spot swatch recolours every linked fill, stroke and text run in one undo step; multi-select and delete with confirmation; New Swatch and New Color Group dialogs (a group from the selected artwork's colours); swatches in colour groups convert, separate and count like any other. The Swatches panel selects ranges and whole groups, has a find field, and drags swatches to reorder, regroup or paint art; Add Used Colors, Select All Unused, Merge, Ungroup and Sort by Kind; a CMYK document keeps applied colours in CMYK. Swatch libraries: nine generated colour libraries, seven gradient libraries (among them Organic Fades, soft perceptually mixed multi-stop fades that thin out to transparent, and Holographic, seven opaque linear foils of narrow pastel and pearl bands and seven radial glows that fade out to a clear edge) and three pattern libraries (Geometric Patterns; Grit Textures with eight seamless grain, speckle, stipple, scratch and fleck tiles; and Optical Effects with eight of VectorCraft's own seamless wave, ring, warped-check, stripe, chevron and lens tiles; their swatches bring their patterns) in a library panel, saved as `.vcswatches`, `.gpl`, swatch exchange (`.ase`) or CSS, and loaded from `.vcswatches`, `.gpl` and `.ase` files (`.ase` both ways: RGB, CMYK, Lab and Gray; global, spot and process; groups) and from color books (`.acb`, read only: the RGB, CMYK or Lab colors of a book such as a Pantone book a user owns, named with its prefix and suffix, spot unless it says process, #831); `swatch.library.copyToUser` copies a loaded library into the User Defined folder without replacing a file, and a file with the same extension and bytes as a User Defined library opens as that library. Tints of global and spot colours ("Name 40%") stay linked and separate as a percentage of their plate. Spot colours can be defined in Lab (Spot Colors options). A built-in [Registration] swatch prints on every plate.
Right-clicking a swatch in either list or thumbnail view selects it without applying paint and offers Swatch Options…, Duplicate Swatch and Delete Swatch for that item. None, [Registration] and missing swatches disable these actions. Existing active-item multiselection is retained; actions still target only the clicked item. Evidence: `panels::swatches::tests::context_menu` harness tests cover all five views, selection, dialog dispatch, duplicate/delete and Undo. All 39 Swatches tests pass; the regression fails with the menu hooks removed. Rendered headless list and thumbnail menus were inspected, and a fresh local deep CodeRabbit review reported zero findings. Full workspace CI passed on Linux/WSL on the merged branch (all 13 gates), including the test-helper correction for the upstream compile error tracked in #7727; native Windows full CI has two unchanged engine-test failures. Scores and estimates unchanged.
Validation on 2026-11-15: native Windows formatting, workspace Clippy and all 39 focused Swatches tests passed. Windows full CI stopped at unchanged engine tests `tests::package::a_confined_package_names_files_outside_the_read_root_by_name` (slash-sensitive report assertion) and `tests::plugins::plugin_storage_behind_a_link_is_left_alone` (storage-link setup returned AlreadyExists). Both cases pass in the Linux/WSL full CI run, which passed all 13 gates. No engine or CI workflow changes are included.
Dragging swatches onto Delete Swatch deletes them ([the help page](https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=136), Replace, merge, or delete swatches section, lists this drag as one of the ways to delete the selected swatches): a swatch or color group dragged from the Swatches panel, in any view, and released on the Delete Swatch button is deleted through `swatch.delete`, even while nothing was selected and the button is disabled for clicks. A swatch that is part of the selection carries the other selected swatches of its kind with it. VectorCraft's own rules: the drop asks first as a plain click does, and Alt does not skip the question; Cancel keeps everything, and OK deletes them in one undo step; None and [Registration] are never taken; the button is enabled while swatches are selected or while a swatch or group of the active document is being dragged, and it is outlined only while such a swatch or group is held over it, so a paint from another panel, art and a swatch dragged from another document delete nothing. Tests: `panels::swatches::tests::swatches_dropped_on_delete_swatch_are_deleted_after_asking`, `delete_swatch_ignores_other_drags`.
Editing, renaming, deleting or merging a global swatch also changes the colors linked to it in graph designs, the art of brushes and the tile that pattern editing's Cancel puts back, in the same undo step as the rest of the art; Default Swatches with replace unlinks them there too.
A swatch step in `command.batch` (Delete, Swatch Options, Merge, Edit Color Group) changes the fill and stroke for new art as the command run on its own does, so art drawn later in the batch or after it takes the same paint; a batch that fails, and a canceled batch preview, put back the paints it started with, and a canceled Swatch Options preview leaves them as they were. These swatch commands also change the fills and strokes of the appearance new art takes, and Undo and Redo of the command or the batch put the paints for new art back with the swatches. Spot Colors options (`swatch.spotOptions`) and Default Swatches with replace (`swatch.resetDefaults {replace: true}`) as `command.batch` steps also change the fill and stroke for new art as each command run on its own does: a fill or stroke linked to a Lab spot swatch keeps its link and tint and takes the Lab values or their CMYK equivalent, and one linked to a swatch the replace removes keeps its color and loses the link. Evidence: `swatch_steps_in_a_batch_change_the_new_art_paints_as_commands_do`, `spot_colors_options_in_a_batch_change_the_new_art_paints_as_the_command_does`, `default_swatches_replace_in_a_batch_unlinks_the_new_art_paints_as_the_command_does`, `undo_and_redo_of_a_swatch_edit_put_back_the_new_art_paints`, `swatch_edits_reach_the_paints_of_the_new_art_template`, `a_failed_batch_puts_back_the_new_art_paints_a_swatch_step_changed` and `canceling_a_swatch_options_preview_keeps_the_new_art_paints` in `crates/engine/src/tests/swatches.rs`.
Add Used Colors (`swatch.addUsedColors`) and Select All Unused (`swatch.unused`) look colors, swatch names, links, tints and gradients up in hash sets instead of searching every swatch and color for each color or linked paint (New Color Group from artwork too), and New Swatch with several colors (`swatch.new`), New Color Group (`swatch.newGroup`) and Edit Color Group (`swatch.editGroup`) name their new swatches from one set of the names already taken. The new swatches keep their names, order and links, and Select All Unused lists the same swatches. Evidence: `add_used_colors_adds_each_new_color_once_with_free_names`, `add_used_colors_global_links_every_paint_of_a_new_color`, `unused_matches_links_tints_colors_gradients_and_patterns_exactly`, `new_swatches_from_colors_are_numbered_after_names_already_taken`, `new_color_group_numbers_its_colors_after_the_group_and_its_moved_swatches`, `new_color_group_from_artwork_lists_each_color_once_with_free_names` and `edit_color_group_numbers_extra_colors_after_the_names_it_keeps` in `crates/engine/src/tests/swatchcmds.rs`; `free_swatch_names_match_naming_each_swatch_as_it_is_added` and `free_swatch_names_match_new_swatch_names_as_swatches_are_added` in `crates/doc/src/swatches.rs`.
@@ -1683,7 +1771,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **Colorized images (#1466):** a fill color applied to a selected grayscale or 1-bit image (`paint.setFill`) colorizes it with black, white, a process color or a spot color, and refuses a process color when the image has an alpha channel ([Convert color modes](https://web.archive.org/web/20251220223850/https://helpx.adobe.com/illustrator/desktop/manage-colors/select-and-adjust-colors/convert-color-modes.html), "Colorize Grayscale or 1-bit images"); black and white are accepted there too. The canvas draws each pixel in the color as far as the pixel is dark, with white pixels transparent; PDF export writes the image in the color (a spot color as its ink, Registration in every ink) with the image as its soft mask; Separations Preview and printed separations show it on its color's plates; native files keep the color. EPS and SVG write the image's own pixels.
- **Missing library files:** a persistent swatch or graphic style library panel whose file is gone at startup reopens and stays in the preferences, showing the file's path with Locate Library… (`ui.libraryPanel.locate`), which reads the file from where it is now into the same panel.
- **Swatch library and Recolor Artwork parameters:** the `swatch.library.*` commands, `swatch.resetDefaults`, the graphic style library save, load and add, the `recolor.*` commands and `color.harmony`'s `limitTo` refuse parameters of the wrong form, such as `names: "Grays"`, `limitTo: 5` or `includeImages: "false"`. Errors name the parameter, except that a `limitTo` that is not a string, such as `5`, gets an unknown-library error. A `null` counts as left out except for `recolor.apply`'s `model`, which must be a string when given.
- **Color Wheel panel (part of #978):** Window › Color Wheel shows the Fill and Stroke proxy beside a hue ring around a square with saturation across and brightness up. It edits what the Color panel's sliders edit (the active proxy's color, the selected gradient stop or freeform point) through the same paint commands, and a drag is one undo step. Alt paints the other proxy, and Shift steps the ring by 45°. A pick goes from display sRGB into the working RGB space; an RGB, CMYK or Lab color keeps its model, and a Gray color or a tint of a global swatch becomes a process color in the document's color mode. A click gives the ring or the square the keyboard focus, and the arrow keys then step the color; both report their names and values to screen readers, and the Color Picker's color field takes the same keys. Scores and estimates are unchanged.
- **Color Wheel panel (part of #978):** Window › Color Wheel shows the Fill and Stroke proxy beside a hue ring around a square with saturation across and brightness up. It edits what the Color panel's sliders edit (the active proxy's color, the selected gradient stop or freeform point) through the same paint commands, and a drag is one undo step. Alt paints the other proxy, and Shift steps the ring by 45°. A pick goes from display sRGB into the working RGB space; an RGB, CMYK or Lab color keeps its model, and a Gray color or a tint of a global swatch becomes a process color in the document's color mode. A click gives the ring or the square the keyboard focus, and the arrow keys then step the color; both report their names and values to screen readers, and the Color Picker's color field takes the same keys. The panel menu's Box View puts a box in the wheel's place: a color field with a channel strip at its right for Hue, Saturation, Brightness, Red, Green or Blue (Box Channel), on the Color Picker's axes, kept with the preferences (`ui.colorWheel`); the strip and the Color Picker's channel slider take the arrow keys after a click. Scores and estimates are unchanged.
- **Colour:** a Color Picker (colour field, H/S/B/R/G/B channel slider, HSB/RGB/Lab/CMYK fields, hex, web-only snapping, out-of-gamut correction); the Color panel shows a selected colour in its own model and, with nothing selected, the new-art defaults in the mode picked last, which it keeps between sessions; Alt-click paints the other proxy; proxies look through groups and show "?" for mixed paint; Invert, Complement, Apply Last Color (`,`) and Apply Last Gradient (`.`) keep the colour model; every paint command feeds the recent colours. The Color Guide has 21 harmony rules, Steps and Variation options and Limit to Library. Adjust Color Balance (its Global mode shifts tints) and Saturate preview live; Edit Colors and Recolor also reach meshes, images and patterns. Recolor Artwork has colour reduction, five recolour methods, presets, Limit to Library, a colour-wheel Edit tab and Edit Color Group; a local Color Themes panel saves five-colour themes. Fill/Stroke chips open swatch and mixer popovers (the Properties panel has the Control bar's Fill and Stroke chips, Stroke link and weight spinner, with nothing selected too), panels have Illustrator's Window menu keys (Align Shift+F7, Transform Shift+F8, Pathfinder Cmd+Shift+F9, Layers F7, Character Cmd+T…; every panel can be given one in Edit › Keyboard Shortcuts), and Eyedropper Options pick up and apply chosen attributes (Alt and Shift+Alt, image pixels). An ICC CMYK profile converts straight into the RGB working space (not through sRGB, so a wider space such as Wide Gamut RGB keeps colours sRGB can't hold) with the colour settings' black-point compensation, on the canvas and in RGB exports alike (the built-in Generic CMYK compensates both ways, so RGB black separated to a rich black displays as black again). Fills and strokes can overprint (Attributes panel, Overprint Black options), and CMYK documents blend in inks on screen, in PDF and when flattening. Document Color Mode converts the art, symbols, pattern tiles and swatches through the colour settings: Gray stays Gray, RGB grays separate into light grays in cyan, magenta and yellow only, darker four-color grays and a rich black, or go on the black plate only with `grays: "black"` (also for `document.open {colorMode}`).
Plain Comma and Period, and also Shift+Comma and Shift+Period, apply the last solid color and the last gradient to the active Fill or Stroke proxy in VectorCraft ([Default keyboard shortcuts](https://web.archive.org/web/20260726060015/https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html), "Select color fill mode" and "Select gradient fill mode").
Recent Colors keeps the last 30 solid colors applied, newest first and each once, and the list stays the same when another document is opened or made active; a 31st color drops the oldest ([Select colors using the Color panel](https://helpx.adobe.com/illustrator/desktop/manage-colors/select-and-adjust-colors/select-colors-using-the-color-panel.html)). The list lasts for the session. In the Color and Swatches panels the chips wrap onto further rows when the panel is too narrow for one row (`paint.recent`). Tests: `recent_colors_keep_thirty_colors_across_documents` in `crates/engine/src/tests/paintproxy.rs`, `all_thirty_recent_colors_wrap_into_a_narrow_panel` in `crates/ui-egui/src/panels/color/tests.rs`.
@@ -1705,6 +1793,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **Recolor Artwork Add Color and Remove Color tools:** under the display buttons beside the Edit tab's wheel, the Add Color tool adds the color clicked on either wheel to the color group, and the Remove Color tool removes the color whose marker is clicked; a color bar's right-click menu has Remove Color, and the base color can't be removed ([Advanced recolor options overview](https://helpx.adobe.com/illustrator/desktop/manage-colors/learn-color-basics/edit-colors-dialog-overview.html), [Edit swatch groups using the color wheel](https://helpx.adobe.com/illustrator/desktop/manage-colors/modify-colors/edit-color-groups-using-the-color-wheel.html)). An added color is a new row with no current colors and `added: true`; unlike a row made with New Row, it adds its new color to a rewritten color group, after the group's other colors. VectorCraft's own rules: an added color takes the base color's brightness, and with art or a group a removed color's row stays with its current colors and no new color, so that art keeps its colors and the group's swatch at that place is removed. `wheelTool` (`add`, `remove`) is the dialog field. Tests: `the_add_color_tool_adds_a_row_with_no_current_colors`, `an_added_color_joins_the_color_group`, `the_remove_color_tool_removes_a_marker_but_not_the_base_colors` and `a_color_bars_menu_removes_its_color` in `crates/ui-egui/src/tests/recolor.rs`, `apply_params_give_the_group_added_colors_and_keep_its_other_colors` in `crates/ui-egui/src/dialogs/recolor.rs`, and `an_added_empty_row_gives_the_group_its_color_after_the_others` in `crates/engine/src/tests/recolor.rs`. Scores and estimates unchanged.
- **Recolor Artwork brightness and hue wheel:** a button under the Edit tab's wheel tools switches the wheel between hue with saturation and hue with brightness; a marker's angle sets its hue, and its distance from the center sets the component the wheel shows ([Recolor options overview](https://helpx.adobe.com/illustrator/desktop/manage-colors/modify-colors/recolor-options-overview.html), [archived help, Edit colors](https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=144)). VectorCraft's own rules: brightness runs from black at the center to full at the edge, the segmented wheel's five rings become brightness steps, the slider under the wheel edits the component the wheel leaves out (Saturation on the brightness wheel), Add Color takes the hue and brightness clicked at the base color's saturation, the choice holds for both wheels while the dialog is open and the button is off for the color bars, and each opening shows hue and saturation. `wheelAxes` (`hueSaturation`, `hueBrightness`) is the dialog field. Tests: `the_brightness_and_hue_wheel_swaps_the_wheel_axis_and_the_slider`, `a_marker_on_the_brightness_wheel_sets_hue_and_brightness`, `the_add_color_tool_on_the_brightness_wheel_adds_the_brightness_clicked` and `the_segmented_brightness_wheel_has_24_hues_by_5_brightnesses` in `crates/ui-egui/src/tests/recolor.rs`, and `an_added_color_on_the_brightness_wheel_takes_the_base_colors_saturation` in `crates/ui-egui/src/dialogs/recolor.rs`. Scores and estimates unchanged.
- **Recolor Artwork Find:** the Assign tab's Find button finds the colors of the selected rows in the art ([Advanced recolor options overview](https://helpx.adobe.com/illustrator/desktop/manage-colors/learn-color-basics/edit-colors-dialog-overview.html)): while it is on, their art shows as the preview shows it and the rest of the selected art shows dimmed, until a second click ([archived help, Recolor Artwork](https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=149)). VectorCraft's own rules: a dimmed color is a 25% tint of its current color (or the nearest lighter tint when that one is a color a selected row lists), a color a selected row also lists is not dimmed, and Find records no undo step. `findColors` is the dialog field. Tests: `find_dims_the_colors_of_the_rows_not_selected` and `find_shows_the_selected_rows_art_and_dims_the_rest` in `crates/ui-egui/src/dialogs/recolor.rs`. Scores and estimates unchanged.
- **Recolor Artwork color groups list:** a list on the right of the dialog shows the document's color groups, and the Show Color Groups button beside the tabs shows or hides it. A click on a group makes it the group being edited, and the rows take its colors. Save Changes rewrites the selected group with the new colors, New Color Group saves them as a new group, and Delete removes the selected group; the Swatches panel shows each change ([Advanced recolor options overview](https://helpx.adobe.com/illustrator/desktop/manage-colors/learn-color-basics/edit-colors-dialog-overview.html)). VectorCraft's own rules: when the art has colors of the group, Save Changes and OK keep the group's swatches in order, and a swatch no row lists keeps its color; an excluded row leaves its swatch its own color; after a save with art, the rows' new colors take the Global Adjust, which goes back to 0%. `group`, `groupStorage` and `groupAction` are the dialog fields. Tests: `the_color_groups_list_selects_saves_and_deletes_groups`, `a_group_picked_in_the_list_recolors_the_art` and the `saving_a_group_` tests in `crates/ui-egui/src/dialogs/recolor.rs`, and `edit_color_group_with_its_own_colors_records_no_undo_step` and `edit_color_group_with_its_own_color_keys_keeps_the_colors` in `crates/engine/src/tests/swatchcmds.rs`.
- **Recolor Artwork New Row:** the Assign tab's New Row button adds a row with no current colors, so current colors can be moved into it and take its new color ([Advanced recolor options overview](https://helpx.adobe.com/illustrator/desktop/manage-colors/learn-color-basics/edit-colors-dialog-overview.html), [Assign new colors to selected artworks](https://helpx.adobe.com/illustrator/desktop/manage-colors/modify-colors/assign-new-colors-to-selected-artwork.html)). VectorCraft's own rules: the row goes above the first selected row (at the top when none is selected) with that row's new color and becomes the selection, and Merge with it as the first selected row moves the other rows' colors into it. The button needs selected art. An empty row recolors nothing, does not count toward Colors, adds no library swatch and gives a rewritten color group no color. While it is empty, Save All Colors and a new color group saved from colors alone leave its new color out, the Edit tab's wheel, bars and chips do not show it and its sliders edit the base color instead, the harmony rules and linked moves leave its new color as it is, and the Color Theme Picker gives it no color. Tests: `a_new_row_goes_above_the_selection_and_takes_merged_colors`, `an_empty_row_gives_the_group_no_color`, `an_empty_row_gives_a_new_group_no_color`, `an_empty_row_takes_no_harmony_or_wheel_color`, `theme_picks_leave_an_empty_row_out`, `save_all_colors_leaves_an_empty_row_out` and `colors_merged_into_a_new_row_take_its_new_color` in `crates/ui-egui/src/dialogs/recolor.rs`, `an_empty_row_recolors_nothing` and `an_empty_row_adds_no_swatch_and_no_group_color` in `crates/engine/src/tests/recolor.rs`.
- **Edit Colors parameters:** `edit.colors.saturate` needs a number `intensity`, the value from -100% to 100% that Saturate takes ([Adjusting colors](https://web.archive.org/web/20230128232631/https://helpx.adobe.com/illustrator/using/adjusting-colors.html)), and answers "missing number `intensity`" without one; a number outside the range counts as its nearest end. A value that is not a number, such as `"40"`, is refused with `` `intensity` must be a number, not "40" ``, as in every command that needs a number (`tests::params::a_malformed_required_number_is_not_reported_as_missing`). `edit.colors.adjustBalance` refuses a channel and `color.harmony` refuses `steps` or `amount` that is not a number; both read `null` as a value left out. `tests::editcolors` and `tests::colorguide` cover them.
- **Convert to Indexed Color:** Edit › Edit Colors › Convert to Indexed Color… (`edit.colors.toIndexed`) stores the embedded images in the selection as indexed-color PNGs of at most 256 colors. The palette is chosen as for a PNG-8 export, as evenly spaced levels of red, green and blue, or from the document's swatches, with diffusion, pattern or noise dithering; pixels under half opacity become transparent. The dialog previews live, and OK is one undo step. This is VectorCraft's own command and counts toward no score. `tests::editcolors` and `encode::tests_palette` cover it. Scores and estimates unchanged.
@@ -1716,18 +1805,22 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **RGB input to other commands in a CMYK document:** type colors (`text.create`, `text.setStyle`, `text.setRangeStyle`), a Shape Builder hex fill, `paint.editGradient` stops, freeform gradient points, gradient mesh points (the Mesh tool gives a new point the fill's color in its own model), the Symbol Stainer's color and the swatch commands (`swatch.new {colors}`, `swatch.newGroup`, `swatch.editGroup`, `swatch.edit`) separate RGB through the color settings as `paint.setFill` does: with Generic CMYK, `text.setStyle {fill: "#53aadf"}` gives C62 M19 Y0 K0. A color a swatch already has keeps its model, and a swatch color given with `mode` is converted into that mode only.
- **Generic CMYK (SWOP-like):** each ink's 40% and 50% tints gain as [CGATS TR 001](https://registry.color.org/cmyk-registry/cgats_tr_001) gives for SWOP printing, and separations stay within SWOP's [300% total ink limit](https://en.wikipedia.org/wiki/Specifications_for_Web_Offset_Publications). The paper, solid and overprint colors, the black-generation curve and the black point are VectorCraft's own values: RGB black separates to 90% black under neutral cyan, magenta and yellow that fill the ink limit (C75 M68 Y67 K90).
- **Swatches made from a shown color in a CMYK document:** the Color panel menu's Create New Swatch, an Alt-click on the Swatches panel's New Swatch button, the New Swatch dialog for a gradient, a Fill or Stroke proxy or the Gradient panel's thumbnail dropped on the Swatches panel (or Alt-dropped on a swatch of its kind), and the Gradient panel's Add to Swatches and Save to Swatches keep each color's model, as the Color Guide's and Color Themes' saved colors do: an RGB object's color gives an RGB swatch, and a gradient's RGB stops stay RGB.
- **Sample Color from Screen:** an eyedropper button in the Color Picker and `ui.sampleScreenColor` (which can be given a key in Keyboard Shortcuts) pick a color anywhere on the screen with the system's sampler: `NSColorSampler` on macOS, the XDG desktop portal's [PickColor](https://flatpak.github.io/xdg-desktop-portal/docs/doc-org.freedesktop.portal.Screenshot.html) on Linux, a still copy of every monitor under a crosshair on Windows, and the EyeDropper API in browsers that have it. The color becomes the fill or the stroke as one undo step, or the Color Picker's color, converted from display sRGB into the working RGB space. On Linux, a session without a portal that has PickColor, a portal that does not return from the call within 25 seconds (VectorCraft's own limit) or leaves the bus before it answers, and a portal that ends the request another way each show a status message and end the wait. On Windows, the copy is read as sRGB, so the colors of HDR and wide-gamut displays are not converted; Escape, a click of another mouse button or switching to another window cancels (VectorCraft's own rules). The BSDs and other browsers have no sampler yet; the button is gray there.
- **Color Guide color groups:** with variation cells selected, the Color Guide's Save Color Group to Swatches button saves those cells as one swatch group, and with none selected it saves the harmony colors, as the [help page](https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf) describes saving several selected variations together (printed page 135). The group takes the cells in grid order (row by row, left to right, each cell once), is named after the harmony rule and is one undo step; these are VectorCraft's own rules. A selection lasts until the base, the Color Guide Options, the variation mode, the harmony rule, the library limit or the colors the grid shows (for example after a new swatch while the guide is limited to the document's swatches) change.
- **Sample Color from Screen:** an eyedropper button in the Color Picker and `ui.sampleScreenColor` (which can be given a key in Keyboard Shortcuts) pick a color anywhere on the screen with the system's sampler: `NSColorSampler` on macOS, the XDG desktop portal's [PickColor](https://flatpak.github.io/xdg-desktop-portal/docs/doc-org.freedesktop.portal.Screenshot.html) on Linux, and the EyeDropper API in browsers that have it. The color becomes the fill or the stroke as one undo step, or the Color Picker's color, converted from display sRGB into the working RGB space. On Linux, a session without a portal that has PickColor, a portal that does not return from the call within 25 seconds (VectorCraft's own limit) or leaves the bus before it answers, and a portal that ends the request another way each show a status message and end the wait. Windows, the BSDs and other browsers have no sampler yet; the button is gray there.
- **Color Guide colors dragged to Swatches:** a variation cell dragged from the Color Guide onto the Swatches panel's list becomes a swatch of that color, as the [help page](https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf) describes for saving variations as individual swatches (printed page 135). In VectorCraft a harmony strip color drags the same way, a drag carries only the grabbed color (the selected cells stay selected and the selection is not saved), it carries the color the cell shows (snapped to the Limit to Library colors), keeps the color's model and does not paint the selected art; the swatch follows the panel's rules for a dropped color (`swatch.new`, one undo step, a color that is already a swatch is added again under another name, a drop on a color group joins it). These are VectorCraft's own rules. Tests: `a_dragged_guide_color_carries_its_color_and_applies_nothing` and `a_guide_color_dragged_onto_the_swatches_panel_becomes_a_swatch` in `crates/ui-egui/src/panels/color_guide.rs`.
- **Color Guide tints of a spot color:** when the Color Guide's base is a spot color, or a tint of one, chosen in the Swatches panel, with the Color panel's tint slider or with the base chip, the cells right of the center in the base row of Tints/Shades are tints of that spot color: a click paints the art with the tint, a drag carries it, and Save Colors as Swatches and Save Color Group to Swatches make tint swatches ("Ink 60%") linked to the spot color, so they follow an edit of it. The [help page](https://helpx.adobe.com/illustrator/desktop/manage-colors/learn-color-basics/color-guide-panel-overview.html) says spot colors are kept only on the right side of Tints/Shades and every other variation gives process colors. The tint percentages (the base's tint reduced by the share each cell goes toward white), the shades on the left staying process colors, a Limit to Library giving process colors, and a global process base keeping plain colors are VectorCraft's own rules. So are these: renaming the spot color in Swatch Options, also as a `command.batch` step, keeps it the base, and so do an Undo and a Redo of the rename; deleting it (or its color group), making it a process color or closing its document ends the link, so a later spot color of the same name does not become the base until it is chosen, and the base keeps the color it showed. A batch's steps in other documents leave the link alone. Running a script or a plug-in, also as a batch step, ends the link, and a spot color of the same name that appears while the link waits for an Undo does not give the base its color. `swatch.new {colors}` and `swatch.newGroup {colors}` take `{swatch, tint}` entries. Tests: `a_spot_color_base_gives_tints_of_that_spot_color`, `a_tinted_spot_base_gives_lighter_tints_and_a_lost_link_gives_process_colors`, `a_renamed_spot_color_stays_the_base`, `a_deleted_spot_color_ends_the_link`, `an_undone_rename_keeps_the_link`, `a_batch_follows_the_spot_color_across_documents`, `a_deleted_color_group_ends_the_link`, `a_resting_link_keeps_the_color_it_showed`, `a_script_run_ends_the_link`, `saved_spot_tints_are_tint_swatches_of_the_spot_color`, `a_dragged_spot_tint_becomes_a_tint_swatch`, `a_clicked_spot_color_swatch_becomes_a_linked_color_guide_base`, `colors_entries_naming_a_spot_color_save_tint_swatches`.
- **Stroke visibility (#1253):** adding paint to a previously unpainted zero-width stroke restores the existing 1 pt default (`PaintDefaults::default`, `Appearance::set_stroke`), for the selected appearance item, the new-art defaults and Swap Fill/Stroke. Positive widths are kept; recoloring a painted zero-width stroke keeps its explicit zero. A real Eyedropper-to-new-shape sequence reproduces the zero-width inheritance. Five engine regressions cover creation, defaults, targeted items, preserved widths and one-step Undo/Redo (`crates/engine/tests/it/stroke_visibility.rs`).
- **Gradients:** lossless, validated gradient params; gradients follow rotate, reflect, shear, non-uniform scale and distortions; the Gradient tool edits the fill or stroke of the active proxy, type included; an interactive on-canvas annotator (move, length/angle, rotate, add/move/delete/duplicate stops, midpoints, a stop popover, Delete and arrow keys). The Gradient panel has the Fill/Stroke proxy, a gradient-swatch dropdown with Save to Swatches, midpoint locations, Alt-drag to copy or swap stops, swatch drops on the ramp and a stop eyedropper; copied appearances and graphic styles place gradients on each target's own bounds; gradient handles, both ends of a vector drawn on the art and the start of a clicked one snap as other drawn points do (path segments, construction guides and View › Snap to Glyph's guides included) and honour Constrain Angle. Gradient stops stay linked to global and spot swatches. Freeform gradients (points and lines) are edited on the canvas; radial gradients have an extent ellipse, an aspect handle and an off-centre focal point (SVG `fx`/`fy`, PDF two-point radials). A stroke's gradient runs within, along or across it. Object ▸ Expand turns gradients into N objects or a gradient mesh.
A gradient stop that loses its link to a spot swatch (the swatch deleted, a recolor or adjustment that unlinks it, a library gradient, or a library character style linked to a swatch the document lacks) keeps the color it shows at full tint and drops the process plates it printed with that ink, as a stop given a plain color does; this is VectorCraft's own rule. Evidence: `tests::mapping_links_drops_the_process_plates_of_unlinked_stops` in `crates/color`, `tests::linked_stops::deleting_a_spot_swatch_takes_the_process_plates_of_the_stops_it_unlinks` and `tests::library::library_stops_unlinked_from_their_swatch_keep_no_process_plates` in `crates/engine`.
Merge Swatches (`swatch.merge`) also drops the process plates of the gradient stops linked to a swatch it merges, whether the kept swatch is spot, global process or process that isn't global, in the art, gradient swatches, graphic styles, the art of brushes and the fill and stroke for new art; a stop linked to another swatch keeps its plates, and Undo puts the links and plates back. This is VectorCraft's own rule. Evidence: `tests::linked_stops::merging_swatches_takes_the_process_plates_of_the_stops_it_relinks` in `crates/engine`.
- The Gradient panel's Delete Stop sits at the right end of the ramp, level with it, so a panel too short to show the stop fields still shows it; it deletes the selected stop (never below two), as dragging a stop down off the ramp does (#5403).
- Over the strip under the Gradient panel's ramp, where a click adds a stop, the pointer is the white arrow with a plus that Group Selection shows for a click that adds. Windows has no system copy cursor (winit shows the plain arrow for it), so on Windows and X11 the panel hands the glyph to the OS as the canvas hands its tool cursors; macOS, Wayland and the web show the system copy cursor. Over the ramp itself, which adds nothing, the pointer stays the arrow (#8241; `panels::gradient` test `the_strip_under_the_ramp_shows_the_add_cursor`).
- Conic gradients, VectorCraft's own gradient type: the stops sweep once around the center from the vector, clockwise on the page (a negative aspect, or a reflection, turns the sweep the other way), with a Conic button in the Gradient panel's Type row and the Gradient tool's extent ellipse and aspect handle; they follow transforms, Expand into wedges or a mesh, open from `.af` files, and export to PDF as a function-based shading that PDF import reads back as a conic gradient; SVG, EPS and legacy `.ai` files get solid wedges, and CSS a `conic-gradient`.
- Diamond gradients, VectorCraft's own gradient type: the stops run from the center out to a square with a corner at the end of the vector (the aspect stretches it into a rhombus), with a Diamond button in the Gradient panel's Type row and the Gradient tool's square and aspect handle; they follow transforms, Expand into nested squares or a mesh, and export to PDF, SVG, EPS and legacy `.ai` as four linear gradients, one for each quarter of the square (an image in PDF and SVG for translucent stops, a dithered fill, the Perceptual method other than spot color shadings in PDF, or a square with no area), and on type characters in SVG as a radial gradient; PDF import reads a function-based shading whose color is the same along each square about its origin as a diamond gradient.
- Hue Clockwise and Hue Counterclockwise, VectorCraft's own gradient methods, in the Gradient panel's Method menu and on `paint.editGradient` and `paint.setFill` (`method`: `hue-clockwise`, `hue-counterclockwise`): a linear, radial, conic or diamond gradient's colors mix around the hue wheel, with hue, saturation and brightness each changing evenly from one stop to the next and the hue angle keeping one direction, as the fixed-direction rules of [CSS Color 4](https://www.w3.org/TR/css-color-4/#hue-interpolation) do: falling with Hue Clockwise (red, magenta, blue), which is clockwise on the color wheels, and rising with Hue Counterclockwise (red, yellow, green). Hues less than half a color level apart count as one hue, so a color and its tint do not turn the wheel. A gray stop takes the hue of the stop it mixes with, and black its saturation too. The canvas and raster exports draw it through stops on that curve, within half a color level; Reverse Gradient turns the method the other way with the stops, so the ramp keeps its colors. SVG and PDF write it as an RGB image, EPS as a shading in process colors, and a legacy `.ai` file and the `.ai` editing data with the colors between its stops as stops of their own, with a warning.
- Gradient spread, VectorCraft's own setting: Pad, Repeat or Reflect, with a Repeats count of 1 to 100, in the Gradient panel and on `paint.editGradient` and `paint.setFill`; Repeat and Reflect run a linear, radial, conic or diamond gradient's stops that many times along the vector and on past its ends, the Gradient tool marks where the runs meet, and SVG writes and reads `spreadMethod`, CSS writes repeating gradients, PDF writes a conic's sweep shading over one run and the other kinds with their stops repeated across the shape, as EPS, legacy `.ai` and the `.ai` editing data do.
- The stop popover a double-click on a stop opens (the Gradient tool's annotator or the Gradient panel) has an eyedropper beside its Color and Swatches tabs: it closes the popover and samples the next colour clicked on the art into the stop, as the Gradient panel's eyedropper does (#4681).
Escape ends that eyedropper's pick, and Brush Options' Key Color pick, without sampling and returns to the tool that started it; the stop keeps its color, and Brush Options stays open with its Key Color until a new Escape cancels it (#8024, [Modify gradients, archived user guide](https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf#page=264)).
Cmd/Ctrl-click on the Gradient panel's Gradient Fill box or on the Tools panel's Gradient button resets the gradient of the active Fill or Stroke to the linear White, Black gradient, as one undo step ([Default keyboard shortcuts](https://web.archive.org/web/20260726060015/https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html)).
With a gradient stop or a freeform gradient point selected, Alt-clicking a color swatch in the Swatches panel recolors it instead of the inactive Fill or Stroke.
- **Freeform gradient colors in their own model:** Object ▸ Expand and Object ▸ Create Gradient Mesh (`object.mesh.create`) mix a freeform gradient's points in the color model they share: points of C50 M20 Y0 K10 give mesh points of C50 M20 Y0 K10, and RGB points keep their values in a working RGB space other than sRGB. The canvas, the gradient chips and the SVG, PDF, EPS and EMF writers mix the points in that model too. PDF and EPS write a gradient whose points are all CMYK, or all Gray in a CMYK file, as a CMYK image, which PDF's Output settings convert as they convert any CMYK image. Points in different models mix in display RGB (on the canvas in a CMYK document that shows transparency, as the inks of each point), and a CMYK document stores the result of Expand as CMYK through the color settings. Points colored along CMYK stops (`paint.editGradient {stops}`, or a CMYK gradient switched to freeform) are CMYK, and so are a point `paint.freeform.splitLine` adds between CMYK points and a point `paint.freeform.addPoint` adds without `color` to CMYK points. Public reference: [Gradients](https://web.archive.org/web/20250714042311/https://helpx.adobe.com/illustrator/using/gradients.html) and [Meshes](https://web.archive.org/web/20250812201019/https://helpx.adobe.com/illustrator/using/meshes.html), which do not state how colors in different models mix; the rule is VectorCraft's own.
@@ -1751,6 +1844,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
Document Info's Spot Color Objects category lists the objects that use spot colors, the category the [Document Info panel](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/document-info-panel.html) page describes as objects using spot color separations. Each object is listed by name with the spot colors it uses. With Selection Only it lists those in the selection, and the Document Info report and Package's report list them too (`document.info {category: "spotColors"}`, `spotObjects`). Taking a solid color or a gradient stop linked to a spot swatch at a tint above 0 and a grayscale image colorized with one, leaving out process colors that look the same, Registration, gradients whose stops are all at an opacity of 0, gradient stops at an opacity of 0 that mix only with other stops at an opacity of 0 or only over stretches with no width, fills and strokes at an opacity of 0, paint that draws nothing by the rules Pattern Objects follows, spot swatches no art uses and spot colors inside patterns, symbols, opacity masks, effects and placed files, are VectorCraft's own rules. A stop at an opacity of 0 next to a stop above it stays listed, since the stretch between them is drawn in its color. Objects counts the listed objects as Spot Color Objects. Tests: `cmd::docinfo::tests::info_lists_the_spot_color_objects`, `spot_color_objects_take_colorized_images_and_skip_clear_gradients`, `spot_color_objects_skip_clear_fills_and_strokes`, `spot_color_objects_skip_spot_stops_only_in_clear_stretches` and `drawn_stops_follow_the_sampled_stretches` (vectorcraft-engine).
Document Info's Brushes, Spot Color Objects, Pattern Objects and Gradient Objects categories leave out hidden objects, objects at an opacity of 0 and the objects inside a hidden group or layer or one at an opacity of 0, their characters' paints and colorized images included. With Selection Only an object selected inside such a group or layer is left out too, and Objects still counts every object as before. This is VectorCraft's own rule. Test: `cmd::docinfo::tests::info_skips_paints_on_hidden_and_clear_objects_and_their_members` (vectorcraft-engine).
Document Info's Save… writes the category the panel shows, with Selection Only applied, as the [Document Info panel](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/document-info-panel.html) page describes ("Exports the selected category's visible information to a text file"). With All Categories shown it writes every category, which is VectorCraft's own rule (`docInfo.save {category}`). Test: `panels::doc_info::tests::save_writes_the_category_the_panel_shows`.
Document Info's Document category lists the document's transparency settings, as the [Document Info panel](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/document-info-panel.html) page describes: File › Document Setup's grid size, grid colors, Simulate Colored Paper and flattener preset (`document.info`'s `document.transparency`). While the Artboard tool is the current tool, it also lists the width, height and position of each artboard that tool has selected, as the same page describes for the selected artboard (`document.selectedArtboards`). Listing every selected artboard, measuring the position at the top-left corner from the ruler origin of the tool's active artboard, and naming two custom grid colors by their values are VectorCraft's own rules. The panel shows the values in the interface language, and the report keeps them in English. Tests: `cmd::docinfo::tests::info_lists_the_transparency_settings` and `info_lists_the_artboards_the_artboard_tool_selected` (vectorcraft-engine), `panels::doc_info::tests::document_shows_transparency_and_the_artboard_tools_selection` (vectorcraft-ui-egui).
Document Info's category menu and headings show every category title in the interface language, Font Details, Linked Images and Embedded Images included, and the Objects category shows every count label in it too: Compound Paths, Text Objects, Placed Documents, Symbol Instances, Gradient Meshes, Blends, Envelopes, Intertwine Groups, Opacity Masks and Objects with Effects. The Document category's Pattern Swatches row and the Objects category's Path Length row are translated in every catalog that has every menu label. `document.info` and the saved report keep the English labels. Showing these labels in the interface language is VectorCraft's own rule. Test: `i18n::tests::document_info_labels_are_in_complete_catalogs` (vectorcraft-ui-egui).
Document Info shows the values it makes in the interface language too: the Units, the Raster Effects resolution, each font's file, substitution and embedding permission (or that it is built in or missing), each image's size and linked file, each Repeat object's kind with its instances, rows and columns in the language's plural forms, and gradients named by their kind. Font, face, file, swatch and other names stay as they are, a gradient swatch named like a kind included, and `document.info`, Save… and Package's report keep the English values (`document.unitId`, `fontDetails`, `imageObjects`, `gradientObjects` `kinds`). Showing these values in the interface language is VectorCraft's own rule. Tests: `panels::doc_info::tests::values_follow_interface_language_and_keep_names`, `repeat_value_uses_locale_plural_forms_and_drawn_count`, `i18n::tests::document_info_values_are_in_complete_catalogs` (vectorcraft-ui-egui), `cmd::docinfo::tests::info_exposes_structured_font_details_without_changing_english_rows`, `info_exposes_ordered_images_and_unit_id` and `gradient_kinds_tell_kinds_from_swatch_names` (vectorcraft-engine).
The Brushes panel menu's Select All Unused selects the brushes that are not used in the document, as the [Brushes](https://web.archive.org/web/20241230205225/https://helpx.adobe.com/illustrator/using/brushes.html) page (archived copy) describes. A brush counts as used when a stroke paints with it in the art (opacity masks included), in symbols, graph designs, pattern tiles or graphic styles, or in the art of a used brush (`brush.unused`).
@@ -1790,6 +1884,8 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **Graphic styles:** styles keep opacity and blend mode, capture groups and type, apply on top with Alt, and link to the objects using them; Redefine, Break Link, Graphic Style Options, Select All Unused, Sort by Name, and Select > Same Graphic Style / Appearance Attribute. The panel has list and thumbnail views with rendered previews, merge, reorder and drag and drop, plus a Control bar Style picker; eleven generated style libraries (including Game HUD, Status Effects, Neon & Glow, Painted and Sketched, whose seven styles each repaint a solid fill with one watercolor, dry brush, pastel, charcoal or ink effect, and Textures) save and load as `.vcstyles`.
The built-in Textures graphic style library (`graphicStyle.addFromLibrary {library: "textures"}`) has eight styles that paint their fills and strokes with the texture effects: Fine Grain (Grain), Canvas Weave and Burlap Sack (Texturizer), Cracked Glaze (Craquelure), Mosaic Floor (Mosaic Tiles), Quilted Squares (Patchwork), Leaded Glass (Stained Glass) and Damp Paper (Water Paper). The help page names new graphic styles for textures ([What's new](https://helpx.adobe.com/illustrator/desktop/new-features/whats-new.html)) without naming them, so the styles, their names and their settings are VectorCraft's own (`tests::stylelib::textures_styles_apply_their_texture_effects_and_keep_their_params_through_save_and_open`).
In the Graphic Styles panel, Shift-click selects a range of styles and Ctrl/Cmd-click adds or removes one.
A graphic style dragged onto the Graphic Styles panel's New Graphic Style button is duplicated, as the panel menu's Duplicate Graphic Style does, and both put the copy at the end of the list, as the help page describes ([the help page](https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=391)). VectorCraft's own rules: the button takes the drop with no art selected; a dragged style that is highlighted brings the other highlighted styles, copied in panel order in one undo step, and the copies are highlighted; the copy is named `<name> copy`, with a number when that is taken, and no art is linked to it (`a_style_dropped_on_new_graphic_style_is_duplicated_at_the_end` in `crates/ui-egui/src/panels/graphic_styles.rs`, `tests::styles::duplicate_puts_the_copy_at_the_end_of_the_list_in_one_undo_step`).
A graphic style dragged onto the Graphic Styles panel's Delete Graphic Style button is deleted, which the help page gives as another way to delete a style besides the panel menu's Delete Graphic Style; art that used the style keeps its look and is no longer linked to it ([the help page](https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=392)). VectorCraft's own rules: the drop asks first as the button does, and with Alt held it deletes without asking; the button takes the drop with no style highlighted; a dragged style that is highlighted brings the other highlighted styles, deleted in one undo step (`a_style_dropped_on_delete_graphic_style_is_deleted_as_the_button_deletes` in `crates/ui-egui/src/panels/graphic_styles.rs`).
In the Graphic Styles panel's thumbnail and list views, a style with no fill and no stroke, one with only effects or transparency included, shows its preview shape with a black outline, a white fill and a red slash, as the help page describes for the panel's thumbnails ([Graphic styles](https://helpx.adobe.com/illustrator/using/graphic-styles.html)); its effects still draw on that shape. The Control bar's Style picker and chip, graphic style library panels and the large preview on the selected object show the same marker. A fill or stroke row that paints None does not count as a fill or stroke, and a hidden row or one with zero opacity does; these rules, the marker outside the panel's thumbnails and the slash's direction and size are VectorCraft's own (`a_style_with_no_fill_and_no_stroke_shows_an_outlined_shape_and_a_red_slash` in `crates/ui-egui/src/panels/graphic_styles.rs`).
Applying a style to several objects, and Redefine Graphic Style, give the objects one shared copy of the style's appearance instead of a copy each; an object that is edited later gets its own copy, and an object whose placed gradients are fitted to its own bounds gets its own. The undo history's memory estimate counts a shared appearance once. Saved files are unchanged (`crates/engine/src/tests/styles.rs`).
- **Several text styles at once:** in the Character Styles and Paragraph Styles panels, Shift-click highlights a range of styles and Ctrl/Cmd-click adds or removes one, without applying them; the panel menu's Select All Unused (`charStyle.unused`, `paraStyle.unused`) highlights the styles no type uses (in the layers, opacity masks, symbols, graph designs, pattern tiles and the art of brushes), never the Normal style; Delete, the button or the menu item, deletes every highlighted style but Normal in one undo step (`charStyle.delete {names}`, `paraStyle.delete {names}`). The menu's Duplicate copies every highlighted style in one undo step and highlights the copies. A highlighted row dragged onto Create New Style or Delete carries every highlighted style: dropped on Create New Style it copies them all and highlights the copies, and dropped on Delete it deletes them all but Normal and clears the highlight; a row from outside the highlight carries only its own style. Public reference: [Character and paragraph styles](https://web.archive.org/web/20261015081534/https://helpx.adobe.com/illustrator/using/character-paragraph-styles.html).
@@ -1829,6 +1925,8 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **Fonts:** a font is found by any of its names (family and style in every language of its name table, legacy family/style pairs, PostScript name), so documents from other apps open with the font they name; Find Font and `text.fonts` say for each font whether it was found exactly, by another name, substituted or missing, and how many glyphs are missing. PDF and `.ai` import brings Japanese text back as live type: CID fonts without a ToUnicode map read through the standard CMaps, vertical columns (WMode 1) as vertical type, letter spacing as tracking; a glyph is live type only when the installed font (in the closest style of its family) draws the same glyph, and text in a font that isn't installed comes in as live type shown in the fallback font until the font is installed (exports that draw it — PDF, EPS, EMF/WMF, raster, SVG outlines or embedded fonts — warn that they wrote the fallback font, and Print and Print Preview warn about the type that prints in it; `textAs: outlines` keeps the PDF's embedded glyphs). Two installed versions of one family and style (a font library keeping an old file beside a new one) both load, the first staying the one the family and style resolve to; PDF and `.ai` import tries each version when the glyphs differ, and type set in a version other than that one names it (`CharStyle::font_version`), which layout, the substituted-glyph highlight, Find Font, Package and Document Info follow. Fonts outside the font folders are listed too: those font services such as Adobe Fonts load on Windows, through DirectWrite and, for those only GDI lists, through GDI (#1258), and those apps and font managers register with CoreText on macOS (#579). When a document opens with fonts that aren't available, fonts used only in symbols included, a Missing Fonts dialog lists them after the linked-file questions, with Find Fonts (Type › Find Font on them) and Close. Its Find in Folder… (in Find Font too) searches a folder on several threads, reads only what the font scan reads of font files and skips app packages, the Program Files and ProgramData folders, the system's folders and the app data folders in a home folder; Add Fonts copies the font files the user chooses, suitcase fonts with their resource fork, into VectorCraft's own Fonts folder, which the desktop app and `vectorcraft-cli` read (`text.missingFonts`, `text.findFontFiles`, `text.addFontFiles`). The font scan on Linux also reads the folders fontconfig's configuration lists, such as TeX fonts under `/usr/share/texmf/fonts` (#1548, fixes #1529; not verified on Linux).
A variable font's type gets one slider and field per variation axis under the Character panel's Variable Font button, each named as the font names the axis (Weight, Width), so the type can be set between or past its named instances: the settings stay with the characters (`CharStyle::font_axes`, `text.setFormat {fontAxes}` and `text.setRangeStyle {fontAxes}`, clamped to each axis's range; `text.fontList {family, style}` lists the axes), and layout, outlines, the substituted-glyph highlight and PDF and SVG export (`font-variation-settings`, embedded fonts) use the font instanced at them. Another font or style clears them; legacy `.ai` export writes the style and warns that they are left out.
The font menu's Font Technology › Variable (under the kind filter, as [Find, apply, and adjust variable fonts](https://helpx.adobe.com/illustrator/desktop/design-with-text/fonts-and-scripts/find-apply-and-adjust-variable-fonts.html) places Variable in the classification filter's Font Technology section) lists only the families with variation axes, a family with a variable file beside static ones included, and works together with the script, kind, ★ and search filters; it stays set from one opening to the next. Measured by `font_menu::tests::the_variable_filter_lists_only_variable_families`, `font_menu::tests::the_variable_filter_is_named_as_fonts_are`, `tests_axes::a_family_with_variation_axes_is_variable` and `tests_sysfonts::a_family_with_a_variable_file_beside_static_ones_is_variable`.
The font menu's Document filter (beside ★) lists only the families that type in the current document is set in, as the quick filter for fonts used in the document does on the [font browser overview](https://helpx.adobe.com/illustrator/desktop/design-with-text/fonts-and-scripts/font-options-overview.html). It works together with the search, script, kind, Variable and ★ filters, Recent Fonts and Show Similar Fonts, steers the closed field's wheel, follows edits and undo while the menu is open, and is shared by every font menu for the session like the other filters. VectorCraft's own rules: hidden, locked, masked, symbol, pattern and graph design type counts, styles no type uses do not, a composite font lists under its own name, a family the document names but this computer lacks is not listed (Find Font reports it), a document without available fonts lists nothing with its own message, and with no document open the filter is unavailable. Measured by `font_menu::tests::the_document_filter_lists_the_families_the_documents_type_uses`, `font_menu::tests::the_document_filter_combines_with_the_others_and_follows_edits`, `font_menu::tests::the_document_filter_counts_type_in_graph_designs` and `font_menu::tests::the_document_filter_on_an_empty_document_or_none`.
The font menu's Recently Added filter (on its own row under Font Technology) lists only the installed families added in the last 30 days, the newest at the top, as the [user guide](https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf#page=486) and the [font browser overview](https://helpx.adobe.com/illustrator/desktop/design-with-text/fonts-and-scripts/font-options-overview.html) describe it (`vectorcraft_text::FontDb::recently_added`). It works together with the search, script, kind, Variable, ★ and Document filters, lists only the families every active filter matches, steers the closed field's wheel, and is shared by every font menu for the session like the other filters. VectorCraft's own rules: a family is dated by the creation time of its newest font file on this computer (a file the file system keeps no creation time for, or one dated in the future, does not count), the 30th day is included, families added at the same instant are in name order, the recently used families appear in that order without the Recent Fonts section, Show Similar Fonts orders only the families the filter lists, a family leaves the list when its 30 days end while the menu is open, an empty list keeps the filter on and says no fonts match, and fonts bundled with the app or loaded from documents are never listed. Measured by `font_menu::tests::the_recently_added_filter_lists_new_families_newest_first`, `font_menu::tests::the_recently_added_filter_drops_families_as_their_30_days_end`, `font_menu::tests::the_recently_added_filter_lists_a_font_installed_just_now`, `tests::recently_added::families_added_in_the_last_30_days_are_listed_newest_first`, `tests::recently_added::a_family_is_dated_by_its_newest_valid_file` and `tests::sysfonts::installed_fonts_are_recently_added_by_their_files_creation_time`.
The font database looks up a name that is neither a loaded nor an installed family among the other names of the loaded and installed fonts once for each style it is asked in, and keeps the answer until fonts are added or rescanned. Laying out a story of 1,000 paragraphs set in a font that is not installed, with 400 more fonts loaded, takes a median of 56 to 71 ms instead of 409 to 507 ms on Windows 11 (`CRAFT_FONTS_DIR=<craft-fonts checkout> cargo test --release -p vectorcraft-text --lib missing_font_story_layout_timing -- --ignored --nocapture`).
A font family removed while the app runs leaves the font menus when the app scans the font folders again (when its window comes to the front after a font folder changed, or Refresh Font List), also when type had used it: that type then draws in the fallback font and Find Font lists the font as missing, until the font is installed again and the folders are scanned.
- **Files (M4):**
@@ -1839,6 +1937,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
A PDF, or a `.ai` read through its PDF part, whose spot inks have the same values but different names opens with a spot swatch for each ink. The solid fills and strokes of paths and type, and the stops of gradients on paths, link to the swatch of the ink they are painted in, the points of a gradient mesh in one of these inks keep the ink's color, and PDF export writes each of these inks as its own separation (`pdf/src/tests/import_color.rs`). Paint in these inks inside pattern cells, soft masks and type 3 glyphs, and gradients on type in these inks, still import as RGB. Type in one of these inks can also import as RGB when type in another Separation or DeviceN ink is shown with no path drawn between them. The stops of an axial or radial shading in a DeviceN space that mixes one spot ink with process plates (a spot ink over a constant cyan, for example) link to the ink's swatch at its tint and keep the process plates, and PDF and EPS (Level 3) export write those stops in a DeviceN space of the ink and those plates, so the spot plate is not lost (#3235, `import_color::a_device_n_gradient_of_a_spot_ink_over_a_process_plate_keeps_both_inks`). Solid fills that mix a spot ink with process plates, and stops that mix several spot inks, still import as RGB, with the spot inks kept as swatches.
Print separations and Separations Preview print such a stop's process plates on the Cyan, Magenta, Yellow and Black plates beside its tint on the spot plate; with spots printed as process, each process plate prints the stop's plate layered with the spot tint's process equivalent. A freeform gradient's points separate into plates as its stops do, and converting the document's color mode converts them (`print::a_spot_gradient_stop_prints_its_process_plates`, `print::a_freeform_gradients_points_separate_into_plates`, `colorize::separations_preview_shows_a_spot_gradient_stops_process_plates`, `colormgmt::rgb_cmyk_converts_each_freeform_point`).
Print separations and Separations Preview clamp the tint of a fill, stroke or gradient stop linked to a spot swatch or to Registration to 0–1, and a tint that is not a finite number prints no ink, so the plate's coverage stays a number; a stop's process plates still print beside it. This is VectorCraft's own rule (`inks::tests::a_spot_or_registration_tint_that_is_not_a_finite_number_prints_no_ink`, `print::a_spot_gradient_stop_whose_tint_is_not_a_number_prints_no_spot_ink`).
A fill, stroke or gradient stop links to the first swatch of its name, so print separations, Separations Preview and the Separations panel list a spot plate only for a spot swatch that is the first of its name: a spot swatch after a process swatch of the same name, which art linked by that name separates as process, gets no empty plate. A fill, stroke or gradient stop linked to a spot swatch named Cyan, Magenta, Yellow or Black prints its tint on that process plate, as PDF and EPS export write it, instead of a spot amount no plate prints; a gradient stop's own process plates print beside it, with the tint layered over that plate's amount. EPS export writes a gradient with such a stop and process plates in process colors, with a warning, as the EPS gradient rules below say. These are VectorCraft's own rules (`inks::tests::a_spot_swatch_named_like_an_earlier_process_swatch_gets_no_plate`, `inks::tests::a_spot_swatch_named_like_a_process_plate_prints_on_that_plate`).
A `.ai` or EPS opened from its editing data keeps both swatches when a pattern's name, or a named color's, is also another swatch's: a pattern's swatch named as a default swatch, a named color or a palette color becomes "Name 2", and a named color named as a gradient or pattern swatch of the palette becomes "Name 2", with the fills, strokes and gradient stops linked to it following it (`ai::tests::a_pattern_swatch_named_as_another_swatch_is_numbered`, `ai::tests::a_color_named_as_a_palette_gradient_or_pattern_is_numbered`).
PDF export writes a linear or radial gradient that mixes a spot color with process colors, or two spot colors, as a DeviceN shading of the spot inks and the process inks its stops use, so each spot ink prints on its own plate; an off-center midpoint is written as a stop with the inks halfway between its two stops. A gradient that mixes a spot color with RGB or Lab colors is still written without the spot ink, with a warning. A CMYK document, or an export that converts colors to a CMYK destination profile, writes RGB and Lab stops in CMYK first (unless the export converts colors to an RGB destination profile), so there such a gradient, Classic or Perceptual, is written as a DeviceN shading that keeps the spot ink. A Perceptual gradient of spot inks is written as a Separation or DeviceN shading of the stops on its curve; a dithered gradient fill, and a Perceptual gradient with RGB or Lab stops other than white or more than 4,096 stops on its curve, are written as images in process colors, with a warning. A Lab spot color in such a shading is named by the same Separation space, with the Lab alternate, as its flat fills (`engine/src/tests/linked_stops.rs`, `engine/src/tests/labspots.rs`).
PDF and EPS export name a spot ink in a gradient's Separation or DeviceN space, and EPS in `%%DocumentCustomColors`, only when a stop linked to it at a tint above 0, or with process plates, colors part of the gradient (VectorCraft's own rule): a stop out of order whose neighboring stretches have no width, and in PDF a stop whose stretches are fully transparent, adds no ink and no empty plate. EPS writes every stop opaque, so there a transparent spot stop keeps its ink (`crates/pdf/src/tests/output.rs`, `crates/eps/src/tests.rs`).
@@ -1880,7 +1979,9 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
A PDF-compatible `.ai` saved with Include Editing Data for Other Apps keeps envelopes made with a warp, a mesh or a top object editable: its editing copy holds each envelope's contents, shape, Fidelity, Envelope Options and Edit Contents state in the form VectorCraft's `.ai` envelope reader reads, beside its distorted art, so the file opens with the same live envelope, Edit Contents still switching between the contents and the envelope ([Edit the contents of envelopes](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/edit-the-contents-of-envelopes.html)). Envelopes whose type is threaded, has text wrap options or is written as its outlines, envelopes in opacity masks, pattern tiles or another envelope's contents, and envelopes the reader would open with another shape or other settings (a Fidelity that isn't a whole number, bounds margins kept with Distort Appearance off), and envelopes after the first 256 envelopes and images with a Warp in a file are written as their distorted art, with a warning (`envelopes_are_read_back_live` and `envelopes_the_reader_cannot_open_live_are_written_as_their_art` in `crates/eps/src/ai_editing/tests.rs`).
On a large canvas ([the help page](https://helpx.adobe.com/illustrator/desktop/add-and-import-files/start-a-new-file/large-canvas-faq.html); VectorCraft writes one when the artboards together are wider or taller than 16,381 points, its own limit), that `.ai` keeps warp, mesh and top object envelopes editable too: the editing copy writes them live at 1/10 of their size with the rest of the art, and VectorCraft's `.ai` reader opens them at their size, from the editing data alone or beside the PDF part. Read from the editing data alone, an envelope's saved box size is compared with its contents at the same scale, so a bounds margin kept with Distort Appearance comes back, and every path's stroke weight, dashes and dash offset come back at their size, not at 1/10 (`large_canvas_envelope_kinds_round_trip_on_both_ai_routes`, `large_canvas_envelope_stroke_margin_round_trips_on_both_ai_routes` and `a_large_canvas_path_keeps_its_stroke_weight_and_dashes_read_alone` in `crates/eps/src/ai_editing/tests.rs`).
An envelope whose contents hold type keeps the type editable in that `.ai`: the editing copy writes the type as type in the envelope's contents, in the form the `.ai` reader opens as a live envelope of type (`TypedEnvelope` in `crates/eps/src/import/ai/envelope.rs`), so the file opens with the type shown and editable in the envelope's contents, with Edit Contents off or on. An envelope of type in a symbol's art, and one whose type is threaded, has text wrap options or is written as its outlines (mirrored type, for example), is written as its distorted art, as before (`an_envelope_of_type_is_read_back_live_with_its_type`, `an_envelope_of_type_written_as_its_art_leaves_no_story` and `an_envelope_of_type_in_a_symbol_or_a_thread_is_written_as_its_art` in `crates/eps/src/ai_editing/tests.rs`).
A PDF-compatible `.ai` saved with Include Editing Data for Other Apps keeps blends live: its editing copy holds each blend's key objects, its spine when it has one of its own, its drawn steps, and its spacing (Smooth Color, Specified Steps, Specified Distance) and orientation (Align to Page, Align to Path) ([Blend Options](https://helpx.adobe.com/illustrator/desktop/manage-colors/apply-transparency-and-blending/blend-options-overview.html), [blends and their spine](https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=260)), in the form VectorCraft's `.ai` blend reader reads (`crates/eps/src/import/ai/blend.rs`), so the file opens with the same live blend laying out the same steps. Each blend is checked with that reader before it is written; blends it wouldn't open with their settings or as they are drawn are written as their steps with a warning ([file-format-parity.md](file-format-parity.md) lists them) (`blends_are_read_back_live`, `blends_of_compound_paths_groups_and_62_keys_are_read_back_live` and `blends_the_reader_cant_read_are_written_as_their_steps` in `crates/eps/src/ai_editing/tests.rs`).
A top object whose top and bottom sides, or left and right sides, have different numbers of segments is also saved live: the side with fewer segments is split into as many as the side across from it has (each segment into equal spans of its curve, a straight one at even steps), up to the 50 a side the grid holds, so the file opens with the same corners and the same mapping of the contents, its outline holding the added anchors. Where the split side would share out the contents another way, as a side of two curves that aren't one curve can, or a side has more than 50 segments, the envelope is written as its distorted art, with the warning (`a_top_object_with_uneven_sides_is_read_back_live`, `a_top_object_split_to_the_grids_limit_is_read_back_live` and `a_top_object_whose_split_side_would_map_another_way_is_written_as_its_art` in `crates/eps/src/ai_editing/tests.rs`).
A PDF-compatible `.ai` saved with Include Editing Data for Other Apps keeps gradient meshes editable ([gradient meshes](https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=200), [opacity of mesh points](https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=203)): its editing copy writes each mesh point's place, color (gray, RGB or CMYK), opacity and handles patch by patch, with the mesh's transparency, name and opacity mask, in the form VectorCraft's `.ai` mesh reader reads (`crates/eps/src/import/ai/mesh.rs`), so the file opens with the same mesh. A reflected mesh is written with its columns in reverse order. Meshes with a point in a Lab color, with more than 128 rows or columns, folded meshes, meshes the reader would open otherwise, meshes in pattern tiles and in art cut to a clipping object, and every mesh on a large canvas are written as their drawn look, with a warning (`meshes_are_read_back_as_they_are`, `meshes_in_masks_and_symbols_are_read_back`, `a_reflected_mesh_is_written_with_its_columns_reversed` and `meshes_the_reader_cant_read_are_written_as_their_drawn_look` in `crates/eps/src/ai_editing/tests.rs`).
A PDF-compatible `.ai` saved with Include Editing Data for Other Apps writes eligible paths, compound paths and groups with live effects with an art style when the writer supports their appearance and effects (not a filled path that uses the even-odd rule, and none on a large canvas), which VectorCraft's `.ai` reader opens as the same appearance with its effects live (`objects_with_live_effects_are_read_back` and `every_effect_setting_written_on_an_object_is_read_back` in `crates/eps/src/ai_editing/tests.rs`; [file-format-parity.md](file-format-parity.md) lists the objects written without one and the effects they lose).
The same holds for the objects of an opacity mask's art, a mask inside another mask's art and a hidden art root included, so a mask whose art has Offset Path opens drawing the image it masks as it did, with the effect live; geometry effects that no art style holds on a mask's art, such as Roughen, are written applied to the art, which opens drawing what it drew (`a_masked_image_with_live_offset_path_round_trips`, `hidden_and_nested_mask_art_keep_live_offset_path` and `a_masks_art_with_an_effect_no_style_holds_is_written_as_it_draws` in `crates/eps/src/ai_editing/tests.rs`).
Opacity masks in a symbol's art and in a pattern's tile are written the same way, so a symbol or pattern whose mask art has Offset Path opens with the effect live in its definition, and its instances and pattern fills draw as they did; each definition's mask art keeps its own style, and mask art linked to a graphic style opens still linked to it (`a_symbols_mask_art_keeps_live_offset_path`, `a_pattern_tiles_mask_art_keeps_live_offset_path`, `mask_art_styles_stay_with_their_own_art` and `opacity_mask_art_keeps_its_graphic_style_link` in `crates/eps/src/ai_editing/tests.rs`).
@@ -1894,10 +1995,12 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
A symbol instance written as its art, and a blend, mesh, repeat, placed document, intertwine or envelope written as a group of its art, likewise still wraps area type by its bounds when the file is opened, as it did before saving, not by the members of that art: the group starts with the same unpainted rectangle, which takes the object's lock and visibility, and the group keeps the object's name and transparency without options of its own. Area type in that art is above the rectangle, so the rectangle does not wrap it. The rectangle takes its place in the object limit before the art; without room for it, the options are left out with the limit's warning. An object without finite bounds keeps the options on its group. This is VectorCraft's own round-trip rule (`crates/eps/src/ai_editing/tests.rs` `live_art_written_as_a_group_keeps_wrapping_by_its_bounds`, `wrap_bounds_of_live_art_fit_the_object_limit_and_leave_area_type_in_the_art_unwrapped`, `live_art_without_bounds_keeps_its_text_wrap_on_the_group`).
In a `.ai` or EPS opened from its editing data, type has its text object's opacity, blend mode and knockout shape flag, whether it is made from the file's text document or taken from the page, and type made from the text document takes its text object's lock. Where such type has transparency and comes in with other art (the rest of its look, or page type and strokes that go with it), a group of them has it. Where the page draws its type, or the strokes around it, with transparency that is neither its text object's nor its text object's combined with that of the objects around it, the page's type and strokes keep their own instead (`crates/eps/src/import/tests_native.rs`). Where the page draws type of no text object over text objects made from the text document, with their words in any case, that type is theirs as the page draws it and is left out; the page's other type of no text object goes only to text objects whose type the text document can't make, or else is left out with a warning.
`.ai` editing-data import restores the document's listed graphic styles in panel order and links objects that use a listed style; unsupported appearances keep their drawn look (`crates/eps/src/import/ai/tests.rs`).
Swatches › Open Swatch Library › Other Library… lists `.ai` and `.eps` files in its Swatch Libraries filter and loads another document's swatches ([importing swatches from another document](https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=134)): its colors, tints, gradients and pattern swatches, in its order and color groups. Adding a pattern swatch from such a library brings the pattern with its tile and art as a pattern swatch, under the library swatch's name and in its color group. A document with no swatches, and a `.ai` or EPS whose swatches are only the default ones, are refused with a message (`cmd::fileio::tests_aiimport::a_swatch_library_in_a_ai_file_lists_and_adds_its_pattern_swatches`, `a_pattern_from_a_ai_library_keeps_a_color_the_library_lacks`, `swatch_library_documents_without_swatches_or_damaged_are_refused`, `cmd::fileio::tests::the_swatch_library_filter_lists_ai_and_eps_files`).
A `.ai` or EPS graphic style library, whose editing data holds the styles and their list but no layers, opens with those styles in list order. Other Library… loads another document's graphic styles ([Apply graphic styles](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-graphic-styles/apply-graphic-styles.html)) and lists such a library's styles in a library panel. A `.ai` or EPS read as its PDF part or page because its layers can't be used also gets the styles of its list in place of the default ones (`crates/eps/src/import/tests_native.rs`, `cmd::fileio::tests_aiimport::a_graphic_style_library_in_a_ai_file_without_layers_loads_its_styles`).
A `.ai` or EPS symbol library, whose editing data holds symbol definitions and their list but no layers, opens with those symbols in list order, each with its registration point. Other Library… in the Symbols panel's Symbol Libraries Menu imports the symbols of the file you pick ([Create or import symbol libraries](https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/create-or-import-symbol-libraries.html)) and lists such a library's symbols in a library panel. A `.ai` or EPS read as its PDF part or page because its layers can't be used also gets the symbols defined before its layers (`crates/eps/src/import/tests_native.rs`, `crates/eps/src/import/ai/tests.rs`, `cmd::fileio::tests_aiimport::a_symbol_library_in_a_ai_file_without_layers_loads_its_symbols`).
In a large canvas `.ai` or EPS ([Large canvas FAQ](https://helpx.adobe.com/illustrator/desktop/add-and-import-files/start-a-new-file/large-canvas-faq.html)), or a `.ai` whose page is in larger units, opened from its editing data, VectorCraft reads the symbol definitions in the same units as the layers. When the file opens at its full size, each symbol's art, strokes and effects are scaled with the layers, and each instance keeps its own scale and rotation and draws where and as large as before. A new instance comes in at the symbol's full size, the size of an instance at 100% in the file. A symbol library from such a file comes in at the same size, and opacity masks on the layers that don't move with their object are scaled with the layers too. Editing data that VectorCraft wrote keeps its symbols and those masks at their own size, as its `.ai` save writes them (`tests_native::a_large_canvas_eps_keeps_its_symbols_at_the_pages_size`, `a_large_canvas_ai_keeps_its_symbols_at_the_pages_size`, `a_large_canvas_ai_vectorcraft_wrote_keeps_its_symbols_at_their_own_size`, `a_symbol_library_in_larger_units_comes_in_at_the_pages_size`, `build::candidate_tests::scaling_the_symbols_keeps_their_instances_in_place`, `scaling_a_read_document_scales_unlinked_opacity_masks`).
A `.ai` or EPS opened from its editing data whose text document makes the type of every text object that shows takes all its type from the text document: each text object stays in its own group, frame and layer, the page's type isn't matched with them, a file of more than 5,000 text objects still opens with its layers, and type the page draws differently (in another font) keeps the layers, with a warning. A line break inside a paragraph stays a line break in it (`crates/eps/src/import/tests_native.rs`, `crates/eps/src/import/ate.rs`).
A `.ai` opened without its PDF part decodes and parses its text document and scans its text objects' frames once, for both the check that the text document makes all of its type and the build. When the file waits on its PDF part instead (an envelope of type, or a text document that can't be read), the builds with and without the PDF part use that same read. The document and notes are the same as before. Checking and building a file of 2,000 point type objects takes a median of 164 ms instead of 270 ms over seven runs each, with the two routes alternating, on Linux (`crates/eps/src/import/native/build.rs`).
`.ai` and EPS editing-data import reads a text document whose keys are written by name, as files saved for version 11 write them, and the keys that later files write by name among the numbered ones (a font record's version, a paragraph's direction). The type of such a file comes from its text document, so type outside the artboards opens and each text object keeps its own story A run that names its paragraph or character style by the style's number takes that style (`a_text_document_with_named_keys_gives_type_off_the_page_too`, `a_text_document_with_named_keys_takes_a_runs_style_by_its_number`, `crates/eps/src/import/ate/names.rs`).
In SVG export without Fewer `<tspan>` Elements, each character of live type that justification or Mojikumi moves (the letter gaps of a Justify All line without word spaces, the gaps between the characters of a justified Japanese line, closed-up punctuation, the space between Japanese and Latin letters) starts its own positioned `<tspan>`, and type scaled horizontally on a justified line is stretched to its own width (`crates/svg/tests/it/text_layout.rs`).
To find those characters, SVG export lays a type object out a second time only when the second layout can differ from the first: point type with Line-end Punctuation Half Width and no Japanese punctuation or letters, the setting new type gets, is laid out once. Exporting 5,000 such objects takes a median of 109.4 ms instead of 171.5 ms on Windows 11, with the same SVG (`crates/svg/src/export/text/tests.rs`).
@@ -1919,8 +2022,9 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
A `.ai` or EPS whose editing data has brushes opens with the file's Calligraphic, Scatter, Art and Bristle brushes in the Brushes panel in place of the default ones, in the file's order: the Calligraphic size, roundness and angle with their variation, the Scatter size, spacing, scatter and rotation, the Bristle settings, and the Scatter and Art brushes' art (Art brushes in the older and newer forms of their objects). A brush library `.ai` (brushes and no layers) opens from its PDF part with its brushes, so Other Library lists them. An Art brush in None or Tints keeps that colorization, and one in the newer form also keeps its fixed width, Flip Along and Flip Across, and Scale Proportionately, Stretch to Fit Stroke Length or Stretch Between Guides with its guides ([Art brush options](https://web.archive.org/web/20220911143322/https://helpx.adobe.com/pdf/cs6/illustrator_reference.pdf), printed page 193). Pattern brushes and brushes that can't be read are left out with a note. Paths with a Calligraphic brush, and paths with an Art brush in the newer form that bends art of solid-filled paths with those options, open as the path with the brush on its stroke, except paths whose brush scales its art proportionately. Paths with an Art brush in the older form, and other brushed paths, still come in as their drawn look (part of #372 and #637; `crates/eps/src/import/ai/tests.rs`, `crates/eps/src/import/tests_native.rs`).
In a `.ai` opened from its editing data, a path or type object with Offset Path, Outline Object or Outline Stroke on the whole object opens as itself with those effects live, in their order and shown or hidden; on a fill or stroke of type they stay on that fill or stroke. Offset Path keeps its Offset, Joins and Miter Limit, and Outline Stroke takes its width from the stroke. An Offset Path with a setting missing, out of range or not read keeps the drawn art, as does a path with a Path effect on one fill or stroke (`crates/eps/src/import/ai/style/tests.rs`, `crates/eps/src/import/ai/tests.rs`, `crates/eps/src/import/tests_native.rs`).
In a `.ai` or EPS opened from its editing data, a Scatter brush whose last 15 numbers start with 1 comes into the Brushes panel in Tints, and each brush art section is read without its frame, an unnamed, unpainted rectangle with no settings of its own at the art's bounds (within 1/1000 pt). A wider frame stays in the art, and an art group with a state or look of its own (hidden, locked, isolated, knockout, an opacity, a blend mode, a name, a mask, a note or an appearance) stays a group (`crates/eps/src/import/ai/tests.rs`).
A PDF-compatible `.ai` saved with Include Editing Data for Other Apps writes a Scatter or Art brush whose art holds opacity masks to the Brushes panel of its editing copy. This is VectorCraft's own rule for brushes a document already holds. Each mask's art is written in the brush's art section in the form VectorCraft's `.ai` reader reads (`define_brush_art` in `crates/eps/src/import/ai/read/directives.rs`), with the mask's Clip and Invert Mask options, whether it is disabled and whether it moves with its object, for masks up to seven deep in one another's art. A brush whose mask art holds more than paths, compound paths and groups with one solid fill and one plain stroke each is left out with a warning, and a path with an Art brush whose art holds a mask is written as its drawn look. When the reader turns an Art brush's art over, it turns the art of a mask that doesn't move with its object over too (`scatter_and_art_brush_mask_art_round_trips` and `brushes_whose_mask_art_isnt_read_back_are_left_out` in `crates/eps/src/ai_editing/tests.rs`, `an_art_brushs_opacity_mask_art_turns_over_with_its_object` in `crates/eps/src/import/ai/tests.rs`).
In a `.ai` opened from its editing data, type with Warp on the object or on one of its fills or strokes opens as type with the effect live when the live warp draws as the art saved with it. When it draws differently, or when the file's limit of checks has no check left for it, it opens as that art, and one note says how many did. Type stays live without a comparison when the saved art paints nothing or draws type of its own, in frames of threaded type, when a text variable binds it, and when its text object doesn't come in as one text object (`crates/eps/src/import/ai/envelope.rs`, `crates/eps/src/import/tests_native.rs`).
In a `.ai` opened from its editing data, an object with a Tweak that moves nothing or Pucker & Bloat at 0 opens as itself with the effect live. A path, compound path or group whose only effect is Transform without copies, or a Free Distort whose corners make a parallelogram, opens as itself with it live, and so does an object with nothing stroked whose only effect is Twist: a path or compound path with straight segments at up to 180° either way, unless it is a compound path with a guide member that reaches past its other members and the angle is not 0°, and another path, compound path or group with no guide in it at up to 90° either way (limits VectorCraft sets); one twisted further keeps the drawn art. A gradient or pattern, an image, type, a clipping group, an opacity mask or effects inside the object, or a stroke with a Transform that scales, rotates or reflects, keep the drawn art (`crates/eps/src/import/ai/style/tests.rs`, `crates/eps/src/import/ai/tests.rs`, `crates/eps/src/import/ai/read/ops.rs`).
In a `.ai` opened from its editing data, an object with a Tweak that moves nothing or Pucker & Bloat at 0 opens as itself with the effect live. A path, compound path or group whose only effect is Transform without copies, or a Free Distort whose corners make a parallelogram, opens as itself with it live (not when a guide in it reaches past the rest of its art, hidden members included, and the Transform scales, rotates or reflects the object with Transform Objects on, or the object is a group and the Free Distort moves a corner), and so does an object with nothing stroked whose only effect is Twist: a path or compound path with straight segments at up to 180° either way, unless it is a compound path with a guide member that reaches past its other members and the angle is not 0°, and another path, compound path or group with no guide in it at up to 90° either way (limits VectorCraft sets); one twisted further keeps the drawn art. A gradient or pattern, an image, type, a clipping group, an opacity mask or effects inside the object, or a stroke with a Transform that scales, rotates or reflects, keep the drawn art (`crates/eps/src/import/ai/style/tests.rs`, `crates/eps/src/import/ai/tests.rs`, `crates/eps/src/import/ai/read/ops.rs`).
A PDF page whose `UserUnit` (PDF 1.6) is above 1 opens at its size in points, its numbers times the `UserUnit` (one above 75,000 counts as 75,000), and `document.pdfInfo` gives its size and boxes in points too. A `.ai` whose editing data has its artboards in the units of such a page opens from that data at the page's size, with its layers, and when the layers can't be read its pages still take the artboard layout of the data, scaled the same way (part of #1482).
`document.open`, `file.place` and `document.pdfInfo` reject a `cropTo`, `crop`, `password`, `colorMode` or `textAs` that is not a string, such as `"textAs": true`, and `document.pdfInfo` rejects a `thumbnailSize` that is not a number; the error names the param, and nothing opens or is placed. A param left out or given as null keeps its default (`crates/engine/src/cmd/fileio/tests_pdfimport.rs`).
When the PDF content of a `.ai` has a page for each artboard, the layers are compared with every page on its artboard (until the pages compared take 8,388,608 pixels at the comparison's scale, about 67 letter-size pages, or number 128): art that only the layers or only a later page draws is handled as art that differs on the first page is, and a text object that a later page doesn't draw is left out unless its layer doesn't print (`crates/eps/src/import/tests_native.rs`).
@@ -1935,6 +2039,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
In a `.ai` opened from its editing data, Bas Relief in an art style takes its Detail, Smoothness and Light direction from the style's settings block, and an object other than type with it opens as itself with the live effect. A settings block that VectorCraft can't read (malformed, another effect's, a value out of range or a key it doesn't know) keeps the object's drawn look (part of #637; [raster effects reference](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/raster-effects-reference.html), [Photoshop File Formats Specification](https://www.adobe.com/devnet-apps/photoshop/fileformatashtml/), [scripting the filter gallery](https://community.adobe.com/questions-712/scripting-support-for-the-filter-gallery-1064646); `crates/eps/src/import/ai/style/tests.rs`, `crates/eps/src/import/ai/tests.rs`).
PDF export and `.ai` saves write a page with a side longer than 14,400 pt with a `UserUnit` (PDF 1.6), its longer side divided by 14,400 and rounded up to the next thousandth, so that no side is longer than 14,400 units (ISO 32000-1, Annex C.2); a PDF 1.5 file with such a page is written as PDF 1.6 with PDF 1.5's encryption, PDF/X files and PDF 1.3 and 1.4 files write it in points (in PDF 1.3 and 1.4, a page past 32,767 pt that needs a real number past 32,767 is refused with an error naming it), a page whose short side is 3 pt or longer but would be under 3 units at that `UserUnit` gets a smaller one that keeps the short side at 3 units, and the export's warnings give each such page's size and how it is written (#6382). The Save PDF dialog's "Write pages longer than 200 in at full size in points" (`longPagesInPoints`, on by default; `.ai` saves leave it off) writes such pages in points without a `UserUnit` at every PDF version, in files without a PDF/X or PDF/A standard, so readers that ignore `UserUnit` show them at full size.
Export As PDF with Use Artboards off also opens the Save PDF dialog, without its Artboards section, and writes one page of the visible art's bounds with the dialog's options (`document.exportPdf {useArtboards: false}`; `crates/ui-egui/src/dialogs/tests_export.rs`, `crates/engine/src/cmd/fileio/tests_pdf.rs`).
While Alt (Option on macOS) is held, the Save PDF dialog's Cancel button reads Reset, which puts every option back to the chosen preset's settings, passwords included, and leaves the dialog open; letting the key go shows Cancel again (`ui.dialogReset`). [The help page](https://help.adobe.com/archive/en_US/illustrator/cs3/illustrator_cs3_help.pdf#page=283) says that holding Alt or Option and clicking Reset returns the options to their defaults. Resetting to the chosen preset's settings, and keeping the preset, path, artboard range and section, are VectorCraft's own rules (`crates/ui-egui/src/dialogs/save_pdf/tests.rs`, `crates/ui-egui/src/dialogs/tests.rs`).
`document.exportSelection` run without params (a shortcut) takes the same route after its save panel: a picked PDF opens the Save PDF dialog without its Artboards section, and SVG, the raster formats, EPS, DXF, text and exporter plug-ins with parameters open their options, whose OK writes the selection alone, cropped to it, with the chosen options (`crates/ui-egui/src/dialogs/tests_export_selection.rs`).
A `.ai` export with Use Artboards off writes one page of the visible art's bounds without the native document or the editing copy for other apps, with a warning, so the file does not reopen with one artboard in place of the document's; without PDF content it is refused (`crates/engine/src/cmd/fileio/tests_pdfedit.rs`).
That page, and an HP-GL plot of the art's bounds, are measured on the art the file draws: non-printing layers the PDF or `.ai` file leaves out do not make it larger, and nor do the non-printing layers, objects at 0% opacity, placed images, clear gradient meshes and unpainted paths a plot leaves out; Export As refuses an HP-GL plot of nothing it draws before the save dialog (`crates/engine/src/cmd/fileio/tests_pdf.rs`, `crates/engine/src/cmd/fileio/tests_hpgl.rs`, `crates/ui-egui/src/dialogs/tests_export.rs`).
@@ -1955,6 +2060,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
A `.ai` saved without PDF compatibility (its PDF part only a placeholder page) is placed and pasted from its editing data, as it opens: File › Place places the art of the layers that show on the first artboard (`file.place`'s `page` places another one), and Paste of it as PDF data (`clipboard.importPdf`) takes every object. `document.open` with `pages` naming every page of such a file opens it the same way (`crates/engine/src/cmd/fileio/tests_aiimport.rs`).
Explicitly requested editing data keeps the full single artboard when its PDF page is capped at 14,400 pt (#6865; `crates/eps/src/import/tests_native.rs`). Scores and estimates unchanged.
A `.ai`, or a PDF saved with Illustrator's editing data, whose PDF part can't be read (a stream the import refuses) opens from its editing data, with the PDF part's error as its first warning; File › Place places its first artboard the same way, and Paste of it as PDF data with `editingData: true` takes every object (part of #4366; `crates/engine/src/cmd/fileio/tests_aiimport.rs`).
A PDF, or a `.ai` read through its PDF part, opens an image that decodes to up to 4 GiB with up to 2^30 pixels in a 64-bit desktop build (31404 × 31403 RGB pixels are 2.76 GiB), and up to 1 GiB with 2^28 pixels in 32-bit and web builds. A file with an image that would decode to more is refused with the size it would decode past, and an image with more pixels is left out with a warning (#4366). An opaque image is kept as RGB, without an alpha channel (`crates/pdf/src/streams.rs`).
- EPS and DXF in and out, EMF/WMF in and out; PNG (with PNG-8), JPEG, WebP, GIF, TIFF, BMP, Targa and layered PSD export; grayscale TIFFs with an alpha channel or other extra channels place, relink and open, the alpha as the image's transparency (#1466 in part; CCITT Group 3 and planar files with extra channels are not read); PSD and PSB files open and place, linked or embedded, as their merged image in every colour mode and depth (#918). EPS import runs a PostScript Level 3 interpreter written from the PostScript Language Reference: resource categories and `resourceforall`, local and global VM (`currentglobal`/`setglobal`/`gcheck`), `clipsave`/`cliprestore`, subarrays and substrings that share storage, the standard dictionaries in `systemdict`, `dictstack`, `internaldict`, executable filters and strings, `load` by any key, `//name` immediate names, `token`, `execform`, user paths, `cshow`, `rootfont`, `cachestatus`, colour rendering and halftone queries, file `status` and data read with `flushfile`, and `pdfmark` marks dropped (Discord feedback, #466, #469, #474). Masked images (`ImageType 3` in its three interleavings) and reusable streams are read, and an image's several data sources are read in turn, as the reference defines (procedures that read one file get their own rows: such images came in banded, #498). `restore` puts dictionaries back as they were at the `save`, so programs that count their saves in a dictionary read to their end (part of #505). Tiling patterns come in as pattern swatches, uncoloured ones too; Type 3 fonts' glyphs as their outlines, spaced by `ashow`/`widthshow`/`xshow`/`kshow`; mesh and function-based shadings (types 1, 4–7) as gradient meshes; sampled functions (type 0) and Flate/LZW predictors are read. It is tested with programs written from the specification in the ways common generators use these features; Inkscape/cairo EPS files open as vectors. When a file's PostScript still can't be read, it opens as its TIFF preview, its Windows metafile preview (as vectors) or its EPSI preview, and the warning (in the status bar, `document.open`/`app.open`/MCP `open_file` replies and `vectorcraft-cli info`) names the error, the operator that raised it and the procedures it ran in. Legacy PostScript `.ai` files (Illustrator 3–8, written with the prolog that defines their operators) keep their groups and nested groups (`u` … `U`), between and inside clipping groups; EPS and EMF/WMF import nest clips (and groups) at most 128 deep, so a hostile file can't exhaust the stack. DXF TEXT justified Fit or Aligned spans its two points (stretched, or scaled as a whole). PDF export writes type as real, searchable text in embedded subset fonts by default, as Illustrator's PDF presets do (Convert Text to Outlines is an option; printer's marks stay shapes), so text-heavy PDFs stay small (#733). DXF export writes each fill as its outlines followed by its hatch, so laser and cutter software, which skips hatches, gets filled art and type too (#546).
- JPEG XL (`.jxl`) images open and place, linked or embedded, as their first frame, decoded with jxl-oxide and stored as PNG: 16-bit and floating-point samples become 8 bits, alpha is kept, and an image past the pixel allowance is refused from its header (part of #2306; `crates/engine/src/cmd/fileio/tests_jxlread.rs`).
- The Open and Place dialogs list PostScript `.ps` files and `.epsf` files. A `.ps` file opens and places through the EPS reader (its first page), also when its header is only `%!`, as the `ps` format, which exports don't write (Print to PostScript does); an `.epsf` file opens and places as EPS. Copied in a file manager, these files paste as EPS, and `clipboard.importEps` also reads PostScript whose header is only `%!` (`crates/engine/src/cmd/fileio/tests_epsimport.rs`).
@@ -1977,7 +2083,10 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- HEIC and HEIF images open and place from `.heic` and `.heif`, as the [supported file formats](https://helpx.adobe.com/illustrator/kb/supported-file-formats-illustrator.html) list High Efficiency Image under both Open and Place (and [Fix HEIF file import errors on Windows](https://helpx.adobe.com/illustrator/desktop/add-and-import-files/import-other-file-types/fix-heif-file-import-errors-on-windows.html) covers both ways of bringing HEIF files in): HEVC-coded single pictures and grids of tiles, 8 to 10 bits, with an alpha image, decoded by heic-rs in the engine's default `heif` feature. The container's rotation, mirror and crop are applied. Without an `nclx` box, the HEVC stream's video signal type gives the samples' matrix and range. An RGB ICC profile, or Display P3 with the sRGB curve named by an `nclx` box or, without a color box, by the stream, is converted to sRGB; the EXIF resolution tags size the image, or 72 ppi. Image sequences, other codings and grids of cropped tiles are refused with a message, and so is every HEIF file in a build without the feature. The decoder checks image size before allocating (`crates/engine/src/cmd/fileio/tests_heifread.rs`).
- HP-GL/2 plot files (`.plt`, `.hpgl`, `.hgl`, `.hpg`, or a name no other format reads when the file starts with plotter instructions) open and place as paths on one layer, the artboard round the art: each line drawn with the pen down is a stroked path in its pen's color and width, line types become dash patterns, circles, arcs, wedges and Bézier curves are curves, filled and edged rectangles, wedges and polygons (polygon mode) are filled or stroked paths, and encoded polylines, scaling points, user units and rotation are read. Labels, symbol mode's symbols, raster images and hatching aren't drawn and are listed in the warnings (`crates/cad/src/hpgl/tests.rs`, `crates/engine/src/cmd/fileio/tests_hpgl.rs`).
- PICT pictures (`.pct`, `.pic`, and `.pict` as VectorCraft's own name) open and place, as [the help page](https://helpx.adobe.com/archive/illustrator/illustrator-cs5-5-troubleshooting.pdf) lists Macintosh PICT under both opening and placing: versions 1 and 2, with or without the file's 512 bytes of application data, read by the opcodes of Apple's [Opcodes in Pictures](https://dev.os9.ca/techpubs/mac/QuickDraw/QuickDraw-461.html). Lines, rectangles, rounded rectangles, ovals, arcs, polygons and regions become paths in their pen and pattern colors, text becomes point type in the font the picture names, bitmaps, pixel maps and QuickTime JPEG images become images, and the clip region clips what follows it; File › Place places the picture as one group clipped to its frame. Inverted shapes, other transfer modes and other QuickTime formats come back as warnings, and a picture cut short keeps what came before it (`crates/metafile/src/tests/pict.rs`, `crates/engine/src/cmd/fileio/tests_pict.rs`).
- EMF and WMF type takes its size from the font's height, where a negative height is the em and a positive height is the character cell, and a font's average character width becomes Horizontal Scale against the face's own average width (OS/2 `xAvgCharWidth`) when the face gives one, as [LOGFONT](https://learn.microsoft.com/en-us/windows/win32/api/wingdi/ns-wingdi-logfontw) and [MS-EMF 2.2.13](https://learn.microsoft.com/en-us/openspecs/windows_protocols/ms-emf/1cd7cb7a-1a7c-48d2-b4a4-c218f9d12100) describe the two fields. VectorCraft's own rules are that the cell is the face's `usWinAscent` plus `usWinDescent` at a variable font's instance (its ascent plus descent without an OS/2 table), that a negative width is read as its absolute value, and that the width is ignored when the height is 0 (`a_font_width_becomes_horizontal_scale`, `a_positive_font_height_is_the_character_cell`, `a_font_the_system_lacks_is_measured_in_the_face_that_draws_it`, `wmf_font_width_becomes_horizontal_scale`).
- EMF and WMF files are read by the shared `craft-metafile` reader and open, place and paste as editable paths, clipping groups, images and point type: an EMF drawn with EMF+ records (on their own, or beside plain records) is read from them instead of opening empty, and hatched and pattern brushes fill with their average color (`crates/metafile/src/tests/import.rs`).
- EMF, WMF and EMF+ text keeps the character advances the file gives (ExtTextOut's `lpDx`, DrawDriverString positions) as tracking, with pair kerning off; on a single left to right line, an advance that tracking can't give (wider than its range, or a tab) starts a new point type object where the advance puts it, with an underline or strikethrough filled across the space between and on to the end of the last character's advance; type on more than one line is placed a line at a time, each line aligned by its own advances and split as a single line is (`text_is_spaced_by_its_advances`, `multiline_text_with_advances_aligns_each_line`, `wmf_text_is_spaced_by_its_advances`, `emf_plus_driver_strings_keep_their_positions`, `split_type_keeps_its_underline_and_right_to_left_order`).
- EMF and WMF import warns about what the reader leaves out or does not play as the file asks, with counts: a file, or a metafile image inside it, cut short by one of the reader's limits (items, bytes kept, saved states, clip paths), images and pattern brushes that are not read, clips that are not applied, and raster operations other than a plain copy (`a_file_cut_short_by_another_limit_says_so`, `images_the_reader_does_not_read_are_counted`, `clips_that_are_not_applied_are_counted`, `raster_operations_that_are_not_played_are_counted`, `a_wmf_reports_unread_pattern_brushes_and_raster_operations`).
- Export As › HP-GL (`document.export {format: "hpgl"}`) writes a `.plt` plot of an artboard, each artboard or the art for pen plotters and cutters: each visible path once along its line in plotter units from the artboard's bottom-left corner or center, a pen per color or a pen table, curves flattened to a tolerance, type as outlines, clipping masks and the artboard's edges applied, and HP-GL or HP-GL/2 (pen colors and encoded polylines); plots read back by the HP-GL reader give the same lines (`crates/cad/src/hpgl/write/tests.rs`, `crates/engine/src/cmd/fileio/tests_hpgl.rs`).
- HP-GL export's `insideFirst` cuts each pen's paths inside before outside: a path is drawn only after the pen's paths that lie inside it (a letter's counter, a part's holes, rings within rings), touching outlines counted as inside and crossing ones not, in paint order or nearest first with `sortPaths`, within the plot's work budget; these order rules are VectorCraft's own (`crates/cad/src/hpgl/write/nest.rs`, `crates/cad/src/hpgl/write/tests.rs`, `crates/engine/src/cmd/fileio/tests_hpgl.rs`).
- EPS and DXF in and out, EMF/WMF in and out; PNG (with PNG-8), JPEG, WebP, GIF, TIFF, BMP, Targa and layered PSD export; grayscale TIFFs with an alpha channel or other extra channels place, relink and open, the alpha as the image's transparency (#1466 in part); PSD and PSB files open and place, linked or embedded, as their merged image in every colour mode and depth (#918). EPS import runs a PostScript Level 3 interpreter written from the PostScript Language Reference: resource categories and `resourceforall`, local and global VM (`currentglobal`/`setglobal`/`gcheck`), `clipsave`/`cliprestore`, subarrays and substrings that share storage, the standard dictionaries in `systemdict`, `dictstack`, `internaldict`, executable filters and strings, `load` by any key, `//name` immediate names, `token`, `execform`, user paths, `cshow`, `rootfont`, `cachestatus`, colour rendering and halftone queries, file `status` and data read with `flushfile`, and `pdfmark` marks dropped (Discord feedback, #466, #469, #474). Masked images (`ImageType 3` in its three interleavings) and reusable streams are read, and an image's several data sources are read in turn, as the reference defines (procedures that read one file get their own rows: such images came in banded, #498). `restore` puts dictionaries back as they were at the `save`, so programs that count their saves in a dictionary read to their end (part of #505). Tiling patterns come in as pattern swatches, uncoloured ones too; Type 3 fonts' glyphs as their outlines, spaced by `ashow`/`widthshow`/`xshow`/`kshow`; mesh and function-based shadings (types 1, 4–7) as gradient meshes; sampled functions (type 0) and Flate/LZW predictors are read. It is tested with programs written from the specification in the ways common generators use these features; Inkscape/cairo EPS files open as vectors. When a file's PostScript still can't be read, it opens as its TIFF preview, its Windows metafile preview (as vectors) or its EPSI preview, and the warning (in the status bar, `document.open`/`app.open`/MCP `open_file` replies and `vectorcraft-cli info`) names the error, the operator that raised it and the procedures it ran in. Legacy PostScript `.ai` files (Illustrator 3–8, written with the prolog that defines their operators) keep their groups and nested groups (`u` … `U`), between and inside clipping groups; EPS and EMF/WMF import nest clips (and groups) at most 128 deep, so a hostile file can't exhaust the stack. DXF TEXT justified Fit or Aligned spans its two points (stretched, or scaled as a whole). PDF export writes type as real, searchable text in embedded subset fonts by default, as Illustrator's PDF presets do (Convert Text to Outlines is an option; printer's marks stay shapes), so text-heavy PDFs stay small (#733). DXF export writes each fill as its outlines followed by its hatch, so laser and cutter software, which skips hatches, gets filled art and type too (#546).
@@ -1995,12 +2104,16 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- Affinity documents in (AF.1–AF.4): `.af` (Affinity 3) and `.afdesign`/`.afphoto`/`.afpub` (Affinity 1 and 2, container versions 8–12) open and place as editable art: layers and sublayers, groups (pass-through or isolated), artboards (with their names and backgrounds) and Publisher pages side by side, curves with live corners, parametric shapes (rectangles with corner radii, ellipses, polygons, stars, pies, triangles, trapezoids), compound shapes, solid/linear/elliptical gradient fills and strokes (weight, dashes, alignment, scale-with-object), clipping by nesting, vector and pixel masks, artistic and frame text with fonts, sizes, tracking, leading and alignment, placed images (their original JPEG/PNG) and pixel layers (8/16-bit RGB, CMYK), opacity, visibility, locking and blend modes, at the document's resolution in points. Effects, adjustments, brushes and pressure profiles, transparency gradients, master pages, symbol instances (imported as their cached picture), special shapes (cloud, heart, cog…, imported as ellipses) and Affinity-only blend modes are named in the import warning. A file whose native data can't be read opens as its embedded preview with the reason, and that preview can't be placed. Save never writes back over the Affinity file and there is no Affinity export. AF.5 (from DesignCraft's import, storytold/designcraft#291) adds master pages (on a locked layer behind the pages that show them), tables (area type per cell and a line per edge), each paragraph's alignment, indents, spacing and leading, horizontal text scale, outlined text, frame text sized by its text scale, drop shadows and outer glows as live effects (inner shadows as inner glows), outline effects as strokes, colour and gradient overlays baked into the paint, embedded Affinity documents as editable content (their artboards don't become artboards), pixel layers over 64 MP at a reduced resolution and HEIC photos from their stored pixels; automatic leading (size plus the font's line gap) fitted on thumbnails; underlines and strikethrough; strokes whose style is None (every shape stores one) left out, which also brings 6 public files closer to their thumbnails; line breaks inside a paragraph; table cell text centred as Affinity centres it, also where it is taller than its cell; CMYK pixel layers converted through the document's embedded CMYK profile (relative colorimetric with black-point compensation, as each layer's colour settings name), or kept as CMYK images when there is none; outline effects on stroked shapes around their stroke; artistic text whose paragraphs align differently aligned within its longest line, a frame's first baseline at cap height, and frames whose last lines' descenders hang out made tall enough to show them (all measured on a local document's own PDF export: baselines match to 0.1 pt); a local 56-artboard document's mean thumbnail difference went from 16.2 to 11.4, and its pages' mean difference from the owner's PDF export from 12.9 to 9.3. AF.4 adds Affinity 3 artboard recognition and actual-outline clipping, source-backed JPEG/PNG raster tiles, Unicode text-run recovery, stored fallback/exact installed fonts, OpenType feature flags and compound-geometry limits. 51 public CC0/MIT/Apache-2.0 files (33 current `.af`), pinned and sha256-verified (`cargo xtask corpus --affinity`), test native retention and every-board native/SVG/PDF/PSD output for current files; selected files compare their saved thumbnails. No Affinity reopen or independent paired PSD oracle was available; [source audit and complex-font gaps](affinity-validation.md); [scope, provenance and limits](../crates/affinity/README.md).
- Placed documents: File › Place of a `.vectorcraft` file links to it by default (`file.place`'s `link`): one locked object showing an artboard of the document (or its art's bounds), read the way placing it without Link reads it, its symbols, patterns and images kept apart from the document's; without Link (or from bytes, not a file) it is an editable copy as before. It stays vectors in every output (SVG, PDF, EPS, EMF, DXF), and so do placed documents inside it, read from their own files up to 8 levels deep (documents that place each other stop there). On screen they draw from bitmaps cached per file and zoom step, shared by every copy and made in the background (a placeholder until ready), so a sheet of them redraws in about a millisecond; exports and prints draw them exactly. Like linked images, a save keeps only a preview of each (JPEG when opaque) unless Include Linked Files; output, and zooming past the preview, read the file again, falling back to the preview with a warning when it is gone or changed. Saves for older versions write them as plain art. Links check, update, relink, Update Links on open, Link Info (the artboard's size), Placement Options, Break Link (also Embed, Object › Expand: the editable copy placing without Link gives, its resources joining the document), Edit Original (the document in a new tab) and the Links panel cover them; saving a document updates the open documents that place it. The native format (v4) keeps data of 8 KB or more after the JSON instead of base64 in it.
- Placed documents' bitmaps on screen: when a bitmap made in the background is ready, the desktop app renders the canvas again only where the objects that show its file are, when the frame shown was rendered on the UI thread and that part is at most half the canvas. Bitmaps drawn or made since a frame began are kept for that frame past the 512 MiB budget, up to 2 GiB, so a view showing more than the budget does not make them again in every frame. A bitmap that would take them past 2 GiB is not kept, and its file draws exactly at that zoom. A bitmap that can't be made (the file can't be read and there is no preview) shows the light placeholder and is not asked for again. Each ready bitmap used to render the whole canvas again, and bitmaps past the budget and bitmaps that could not be made were asked for again in every frame (`crates/render/src/tests/placed_document.rs`).
- Linked PDF and `.ai` pages: File › Place with Link (the default) places a page of a PDF, `.ai` or `.ait` file read as PDF pages as a placed document, as it links an image, the page and its box (`crop`) kept with the link: Links check, update and relink it, Break Link and Object › Expand give the group placing it without Link gives, every output draws the page's vectors, and Package copies the file. Without Link, or with a password or `textAs: "outlines"`, the page is embedded. An EPS file, a PostScript file or a PostScript `.ai` placed from a file with Link is a placed document the same way, showing the art placing it without Link gives (clipped to its bounding box, or its art's bounds with `crop: "bounding"`); Links lists it as `EPS` or `PostScript`, and a save, Package, Break Link and Object › Expand treat it as they treat a placed PDF page. Placing one keeps the file linked rather than embedding it, as [the help page](https://helpx.adobe.com/illustrator/desktop/add-and-import-files/import-other-file-types/eps-and-dcs-file-import-in-illustrator.html) describes; a DCS file stays a linked image (`crates/engine/src/tests/placed_document.rs`, `crates/engine/src/tests/package.rs`).
- Linked PDF and `.ai` pages: File › Place with Link (the default) places a page of a PDF, `.ai` or `.ait` file read as PDF pages as a placed document, as it links an image, the page and its box (`crop`) kept with the link: Links check, update and relink it, Break Link and Object › Expand give the group placing it without Link gives, every output draws the page's vectors, and Package copies the file. Without Link, or with a password or `textAs: "outlines"`, the page is embedded. An EPS file, a PostScript file or a PostScript `.ai` placed from a file with Link is a placed document the same way, showing the art placing it without Link gives (clipped to its bounding box, or its art's bounds with `crop: "bounding"`); Links lists it as `EPS` or `PostScript`, and a save, Package, Break Link and Object › Expand treat it as they treat a placed PDF page. Package also copies the files that the native document of an EPS file written by VectorCraft links, beside the EPS file's copy, which finds them there by name. Placing one keeps the file linked rather than embedding it, as [the help page](https://helpx.adobe.com/illustrator/desktop/add-and-import-files/import-other-file-types/eps-and-dcs-file-import-in-illustrator.html) describes; a DCS file stays a linked image (`crates/engine/src/tests/placed_document.rs`, `crates/engine/src/tests/package.rs`).
- The place cursor keeps an encrypted PDF, `.ai` or `.ait` file, at a letter page's size (VectorCraft's own size) and without a thumbnail, and a click or drag on it asks for its password, with the Place dialog's Show Import Options on or off; such a file was left out of the cursor before (`crates/engine/src/tests/place.rs`, `crates/ui-egui/src/tests/place.rs`).
- File › Place with Bounding Box (`file.place {crop: "bounding"}`) measures the art that shows, with its strokes and effects, as an export does: hidden objects, guides and template layers do not count, a group whose only part on the page or artboard is hidden is not placed, and symbol instances are measured by their art, for `at`, `rect`, the place cursor and `file.place.info` (`crates/engine/src/tests/place.rs`).
- The Place dialog has a Show Import Options checkbox after Link, Template and Replace ([Place multiple files in a document](https://helpx.adobe.com/illustrator/desktop/add-and-import-files/import-other-file-types/place-multiple-files-in-a-document.html)). On (VectorCraft's default, saved with the preferences), each PDF, DXF or text file asks for its import options before it is placed, also in the place cursor; off (`file.place {showImportOptions: false}`), it is placed with the options last confirmed for its format, and only an encrypted PDF asks, for its password. Text Import Options now starts from the options confirmed last (`crates/ui-egui/src/tests/place.rs`).
- A Shift-click with the loaded place cursor opens the current file's import options (text, DXF, PDF page or embedded PSD) and OK places it at the click, with Show Import Options on or off and for a cursor loaded by `file.place.queue` ([Place multiple files](https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf)). VectorCraft's own rules: a file without such a dialog places as a click does, Cancel leaves the file unplaced, a Shift-drag places at the dragged size, and headless the Shift-click places as a click (`crates/tools/src/place.rs`, `crates/engine/src/tests/place.rs`, `crates/ui-egui/src/tests/place.rs`).
- Separations Preview shows placed and embedded raster images on the visible plates, as it shows vector art (#4153): an RGB image's pixels are separated into process inks with the proof setup's intent, a CMYK image shows its own inks, a hidden plate's ink leaves the image, and with one plate visible the image shows that plate's ink as a grey. Raster images carry no spot ink, so a spot plate shown alone shows them as paper; a colorized image shows its color's plates. Emoji and other bitmap glyphs follow the same rule. The plate-filtered pixels and their reduced-size copies are kept apart from the image's own pixels, for each set of visible plates, proof setup and color settings, and with the preview off nothing changes. Evidence: `tests::colorize::separations_preview_shows_an_rgb_images_process_inks`, `separations_preview_shows_a_cmyk_images_own_inks`, `separations_preview_keeps_an_images_pixels_per_plate_set`. Print preview fidelity remains the open gap, so scores and hours are unchanged.
- Desktop print transport uses `craft-print` for CUPS and modern Windows. Sheet composition, copies, separations and colour management remain in VectorCraft. The Print dialog's Media list also carries the Japanese papers — JIS B4 257 × 364 mm, JIS B5 182 × 257 mm and JIS B6 128 × 182 mm beside the ISO B4/B5 (250 × 353 and 176 × 250 mm, kept so settings and presets saved before them keep their paper), and はがき 100 × 148 mm, 往復はがき 148 × 200 mm, 封筒 長形3号 120 × 235 mm, 長形4号 90 × 225 mm, 角形2号 240 × 332 mm, 角形3号 216 × 277 mm and 四六判 127 × 188 mm; the JSON id or the dialog label names a paper, any case and spacing (`B5 (JIS)` or `b5jis`) (`crates/pdf/src/print/settings.rs`, `crates/pdf/src/tests/print.rs`). The print-preview and physical-device fidelity gaps remain, so print scores and hours are unchanged.
- The Print dialog's Document Ink Options list shows an icon before each spot ink's name, and a click on it prints that one ink as process inks (on the Cyan, Magenta, Yellow and Black plates, with no plate of its own) or as a spot ink again, as [the help page](https://helpx.adobe.com/illustrator/using/printing-color-separations.html) describes for single spot colors. Other spot inks keep their plates, and spot gradient stops and DCS images' spot plates follow each ink's choice (`print.setup {settings: {output: {inks: [{name, convertToProcess: true}]}}}`, kept with the document and in print presets; `print.preview` lists every ink as `documentInks`). These are VectorCraft's own rules: Convert All Spot Colors to Process converts every spot ink and dims the icons while keeping each ink's own choice, a converted ink's Print, Frequency and Angle are dimmed and kept, and process inks and Registration have no icon. Evidence: `print::one_spot_ink_converts_to_process_and_the_others_keep_their_plates`, `print::converting_every_spot_ink_overrides_and_keeps_each_inks_own_choice`, `print::a_spot_gradient_stop_prints_its_process_plates`, `cmykimages::a_dcs_image_converts_only_the_spot_ink_chosen`, `tests::print::a_spot_ink_converted_to_process_is_saved_and_listed_without_a_plate`, `dialogs::tests_print::a_spot_inks_icon_converts_it_to_process_and_back`. Print scores and hours are unchanged.
- The Print dialog's Output section has Overprint Black under Convert All Spot Colors to Process, off by default and available with Separations ([Print color separations](https://helpx.adobe.com/illustrator/using/printing-color-separations.html) lists it among the separation options): black art then leaves the inks under it on the other plates (`print.setup {settings: {output: {overprintBlack: true}}}`, kept with the document and in print presets). Solid 100% K or 100% gray fills, strokes and characters (to within half a percent, as Edit › Edit Colors › Overprint Black counts them), and gradients whose every stop (every color point of a freeform gradient) is, overprint; rich, RGB, Lab, spot-linked and lighter blacks are not marked, paints already set to overprint keep that setting, and only the printed copy is marked. These limits are VectorCraft's own rules. Characters set to overprint now also leave the inks below them on printed PDF plates, a type object's own fill in a PDF is drawn with its blending mode, and Edit › Edit Colors › Overprint Black counts a gradient with a stop linked to a spot swatch as a spot black, as it counts a solid one, and a freeform gradient by the color points it draws from. On a plate, an overprinting paint that puts none of that plate's ink down is drawn as nothing; on PostScript plates so is up to half a percent of another ink in a color that counts as black, and any other faint ink stays on the plate. Evidence: `print::overprint_black_keeps_the_inks_under_solid_black_on_separations`, `print::overprint_black_keeps_the_cyan_under_near_and_freeform_blacks_on_postscript_plates`, `print::overprinting_paints_keep_their_faint_ink_on_postscript_plates`, `print::overprinting_type_leaves_the_inks_below_on_separations`, `print::a_type_objects_own_black_fill_overprints_on_separations`, `tests::print::overprint_black_is_saved_with_the_setup_and_in_presets`, `overprint::tests::a_gradient_with_a_spot_linked_stop_is_black_only_with_spot`, `overprint::tests::a_freeform_gradient_is_black_when_every_point_is`. Print scores and hours are unchanged.
- The Print dialog's General section (and the print preset editor) has a link button after Scale W and H, as the Custom scale has one on [the help page](https://helpx.adobe.com/illustrator/desktop/save-and-export/export-files-to-different-formats/print-documents-in-illustrator.html), where turning it off scales the width and height apart. While it is on, typing either percentage sets the other, and turning it on sets H to W. It is on for new settings, dimmed with the fields unless Scaling is Custom or a tiling choice, toggled with a click, Space or Enter, and named with its on or off state for screen readers. W and H take 1–1000% in the fields. The link is kept with the document's print settings and in print presets (`print.setup {settings: {scale: {linked}}}`); settings saved without it read it as off, so they print as before. Its default, the tiling choices and the agent rules are VectorCraft's own. Evidence: `print::the_scale_link_is_on_for_new_settings_and_off_for_a_saved_scale_without_it`, `tests::print::the_scale_link_keeps_width_and_height_equal`, `tests::print::a_scale_saved_without_the_link_keeps_its_width_and_height`, `dialogs::tests_print::the_scale_link_keeps_scale_width_and_height_equal`, `dialogs::tests_print::a_print_preset_keeps_the_scale_link`. Print scores and hours are unchanged.
- A PDF, PDF-compatible `.ai` or `.ait` opened from its pages or its editing copy opens with the File Info that its XMP packet and its document information dictionary give: the title (`dc:title`, its `x-default` item first, else Info `Title`), the author, description, keywords, copyright status, notice and URL, and the created and modified dates, the XMP packet's value where both give one (`crates/pdf/src/tests/file_info.rs`, `crates/engine/src/tests/fileinfo.rs`). An SVG opens with the title of its root `<title>`. The title is File Info's alone (`DocMetadata::title`): the document's name stays the file's name with its extension, a file that gives no title leaves File Info with that name, and exports (PDF, SVG, PNG, EPS, `.ai`) and native saves carry it; changing the title in File Info sets the document's name as before (#3626).
- PDF export and PDF-compatible `.ai` and `.ait` saves write the document's File Info created date as the file's creation date, or the time of writing when the document has none, and the time of writing as its modification date; the page information mark still prints the time of writing (`crates/engine/src/tests/fileinfo.rs`, `crates/pdf/src/tests.rs`, `crates/pdf/src/tests/marks.rs`).
- PDF export and PDF-compatible `.ai` and `.ait` saves write File Info's copyright notice, URL and status to the XMP packet (`dc:rights`, `xmpRights:WebStatement`, `xmpRights:Marked`), so a PDF or `.ai` opened from its pages keeps them (`crates/pdf/src/tests/file_info.rs`, `crates/engine/src/tests/fileinfo.rs`).
@@ -2051,6 +2164,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- Missing linked files can be looked for in a folder and its subfolders: Find in Folder… in the Linked File Not Found dialog and in the Links panel menu lists the files with each one's name, those with the size and contents saved with the link first, and relinks the files chosen, copying an image's file into the document's folder when asked, without replacing a file there (`links.findFiles`, `links.relink {copy}`). In the Links panel it looks for the selected linked files when any are selected.
- The Links panel's Relink… opens a Relink dialog whose Replace menu picks which links take the new file: Selected Instances (the selected images, as before), All Instances (every image linked to the same file), Missing Links from This Folder (then every other missing link whose file name is in the new file's folder) and Each Link Separately (a file for each selected link in turn). Each relinks as one undo step (`links.relink {scope}`, `ui.relinkDialog`). Relink to Folder… stays as it is.
- The Links panel menu's Copy Info ([Links panel](https://helpx.adobe.com/illustrator/desktop/add-and-import-files/import-from-other-apps/links-panel-in-illustrator.html)) copies the selected link's file name to the clipboard (`links.copyInfo`). VectorCraft's own rules: with several rows selected it copies one name per line in the order the panel shows them, an embedded image gives the name its row shows, and the item is off with no row selected.
- The Links panel menu's Unembed… works on several selected embedded images at once and writes them all to one chosen folder ([Embed and unembed images and files](https://helpx.adobe.com/illustrator/desktop/add-and-import-files/manage-linked-and-embedded-files/embed-images-and-files.html)): it asks for a folder once, writes a file for each image there and links each image to its file in one undo step (`links.unembed {ids, folder}`). VectorCraft's own rules: each file keeps the format its image is stored in (or PNG when that format is not one of VectorCraft's raster file formats) and is named after the image, a taken name gets a number (`Name 2`) and a file already in the folder is never replaced, linked rows in the selection are left as they are, and when one image can't be written the files already written are removed and nothing is unembedded. On the web each image is downloaded instead. Evidence: `unembed_to_a_folder_writes_each_image_and_links_it_in_one_undo_step`, `unembed_to_a_folder_that_fails_leaves_no_file_and_no_change`, `unembed_writes_several_images_to_one_picked_folder`.
- Linked files inside symbols, graph designs, patterns and opacity masks are saved with their paths relative to the document, as linked files in the layers are, so they are found after the document and its files move to another folder together; on open each of those links takes the path where its file was found. Update Links, and opening with Update Links: Automatically, read a modified file again for that art too, and saving a document refreshes its placed copies inside symbols and patterns of the other open documents. Evidence: `links_outside_the_layers_find_their_files_after_the_folder_moves`, `update_links_reads_files_again_inside_symbols_patterns_and_masks`, `saving_a_document_refreshes_its_placed_copies_inside_symbols_and_patterns`.
- A linked file that is missing when a moved document is saved keeps the folder its relative path names, instead of a relative path worked out from the out-of-date absolute path, also for a `.ai` file another app wrote (such as `src/`), so the file is found once it is back in that folder. Evidence: `a_missing_link_keeps_its_relative_path_when_the_moved_document_is_saved`, `links_of_an_imported_file_are_found_by_their_relative_folder`, `a_missing_link_of_a_moved_document_keeps_its_relative_place`.
- On Windows, a document opened from a mapped network drive finds its links stored with the share's own path (`\\server\share\…`), as the same document opened from the share does; links on other computers stay missing.
@@ -2095,6 +2209,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
With Overprint Preview or Separations Preview on, the renderer keeps the art it prepared for the preview from one frame to the next. It prepares again the objects that changed, and all of the art when Discard White Overprint changes or, with Separations Preview, when the plates shown, the proof setup, the swatches, the Spot Colors option or the color settings change or a profile is loaded. It draws the other objects from the art, geometry and stroke outlines it kept for them.
Pathfinder › Merge and the `pathfinder.merge` group effect find the faces of every fill in a few contour passes over the arrangement, as Trim and Crop do, instead of one pass for each distinct fill. The output paths and their order are the same. With 8,000 squares that do not touch, each with its own fill, Merge takes 72 to 107 ms instead of 17 to 32 s (release build).
The Pathfinder panel, Offset Path, Clean Up, Divide Objects Below, Make and Release Blend, Envelope Distort's Make and Release, Repeat (Radial, Grid, Mirror and Release), Vector Halftone, New and Redefine Symbol, Delete Symbol, erasing with the Symbol Sprayer, Rasterize, Convert to Artboards, Flatten Transparency, Clear Guides, Shape Builder, Live Paint, Release Image Trace, Make and Release Opacity Mask, Delete with direct-selected anchor points, Remove Anchor Points, Cut Path, and the Shaper, Knife, Eraser, Path Eraser, Line Cut, Rectangle Cut, Mirror & Cut and Blob Brush tools add and remove objects in one pass over each layer or group they change, and Outline Stroke and Expand write each new object in the place of the object it replaces (#1429).
Cut Path at Selected Anchor Points (`path.cutAtAnchors`) selects the cut ends with one selection call, which skips paths already selected through a hash set, instead of adding each cut path in turn and searching the paths already added. The selection is the same, every field (`selecting_cut_ends_matches_adding_them_one_by_one`). With the 8 middle anchors of each of 5,000 open paths of 10 anchors selected, building the selection of 40,000 cut ends takes 9.7 ms instead of 232 ms of CPU time, and with 2,000 paths 3.2 ms instead of 39 ms; at 500 paths both take 3 ms or less (medians of 7 runs, `cargo run --release -p vectorcraft-engine --example cut_path_select_bench`). Scores and hours unchanged.
Offset Path looks up the segments near each candidate hole or island in a tree of the source path's segment bounds when it decides whether to drop that contour, instead of testing the bounds of every segment. The output paths are the same. On compound and open paths of 25,000 to 40,000 anchors with 6,400 to 11,976 candidate contours, that check takes 11 to 13 ms instead of 140 to 649 ms (medians of five interleaved runs). The limit on overlapping segment pairs is the same, so a path that stops with "Offset Path: the path is too complex to offset" still stops there.
Offset Path on several selected paths, or on a group of them, works out their offsets on as many threads as the computer has logical CPUs (one thread on the web and for a single path), and then makes the new objects one after another in the selection's order. The new objects, their ids, their stacking, the selection and the undo step are the same as when the paths were offset one at a time, and when more than one path fails, the error is the one for the first of them in that order (`tests::pathops::offset_path_of_several_objects_keeps_their_order`, `tests::pathops::offset_path_works_on_several_threads_in_order`, `tests::pathops::offset_path_stops_after_the_first_failure`).
Finding the distinct regions of an arrangement lists the shapes that cover each region instead of keeping a flag for every shape, so that step's time follows how many shapes cover each region rather than how many shapes there are. Divide, Hard Mix, Soft Mix, Shape Builder, Flatten Transparency, trapping, Intertwine and the Pathfinder effects are among the commands that use that step. The regions, their order and the output are the same. Divide on 3,000 overlapping rectangles takes 0.84 to 1.13 billion CPU cycles on its thread instead of 1.25 to 1.46 billion (dev build, six runs of each, alternating, while other builds were running).
@@ -2116,6 +2231,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
A selection with more than 100,000 points to outline shows its bounds instead of each object's outline and anchors. Paths count their anchors. Area type and type on a path count the anchors of their frame or path, and point type counts six: its box's corners and the ends of its baseline marker. Images, symbol instances, placed documents, and area type or type on a path in perspective count the four corners of their box, and gradient meshes and envelopes count their points and the ends of their mesh lines. The hover highlight leaves out an object past that count, and such an object shows its bounds as the key object. With 32,768 type objects, images, symbol instances, gradient meshes or envelopes selected, the selection's outlines and anchors add fewer than 100 vertices to the canvas's mesh (#2460).
The canvas keeps the selected objects' outlines, anchors and handles from one frame to the next as one mesh. It builds an object's marks again when the object, its layer color or its selected anchors change. A pan moves the kept outlines and handles and places the anchor squares again. Each subpath and handle gets its triangles the first time it is in view. A frame with a new zoom or rotation draws the marks one shape at a time and keeps nothing, and the next frame at that view builds them. The pixels are the same, apart from two small differences: a kept outline's corner of exactly 90 degrees in a rotated view can keep its miter or cut corner after a pan, and kept vertices can move by rounding errors. On Windows at 1440 × 900, in a release build, with 2,000 selected circles of 50 anchors each in 10 fill colors, an idle frame takes 12.8 ms instead of 59.9 ms with the Selection tool and 29.8 ms instead of 192.1 ms with Direct Selection (medians of five runs). A frame during a zoom takes about what it did: 86.7 ms instead of 80.0 ms with the Selection tool.
Delete, Cut, Group, Ungroup, Make and Release Compound Path, Make Clipping Mask, Send to Current Layer, Duplicate, Copy in the Move, Rotate, Scale, Reflect and Shear dialogs, Transform Each with Copy and each move of an Alt-drag take time in proportion to the size of the document (#1429).
Cut, and Clear with `ids`, take the removed objects out of the selection in one pass over the selected objects. With 50,000 objects selected and all of them cut, that step takes 5.07 to 5.91 ms instead of 544 to 630 ms, with 20,000 it takes 1.75 to 1.87 ms instead of 91.7 to 97.2 ms, and with 2,000 it takes 0.120 to 0.148 ms instead of 0.940 to 0.955 ms (release build, 7 wall-clock runs of each, measured while other builds were running).
In the web build the status bar's render and UI times are measured with the browser's `performance.now()`, and the Layers panel stops rendering row thumbnails in a frame once they have taken 8 ms.
On the desktop, the Layers panel renders a row's thumbnail on its thumbnail thread when the row's paths, and the paths of its opacity masks that are not disabled, hold more than 2,000 anchors in all. It already did this for the first thumbnail of a row of more than 200 objects. Until its first thumbnail is ready, the row shows boxes at the bounds of up to 41 of its paths, each in its path's solid fill or stroke color or in gray, when its own paths, without its opacity masks, hold at most 2,000 anchors in all, and an empty white box otherwise. With one path of 200,000 anchors, the first frame after the panel opens takes 2.4 ms instead of 393 ms (release build, median of three runs).
The same 2,000-anchor limit counts each glyph of type as 4 anchors, each point of a gradient mesh as 1 and every 100 pixels of an image as 1, and a symbol instance or a placed document counts the objects and anchors of the art it shows. A placed document whose file has not been read yet, or a symbol nested more than 8 deep (one that holds an instance of itself, for example), gets its first thumbnail on the thumbnail thread, and so does a row whose art takes more than 20,000 steps to count (each object, subpath, text run and symbol looked at is one step). The first frame after the panel opens takes 2.4 ms instead of 19.8 ms with 5,000 glyphs of point type, 1.8 ms instead of 343 ms with one instance of a symbol of a 200,000-anchor path, 2.0 ms instead of 11.0 ms with a 100 × 100 mesh, and 2.1 ms instead of 274 ms with a placed document of a 200,000-anchor path (release build, median of three runs).
@@ -2147,12 +2263,14 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **Raster-effect resolution in PDF:** when the 64 million pixel cap on an effect image renders an object's raster effects below the document's raster effects resolution, PDF export warns once per object with the requested and the lowest achieved ppi (`crates/engine/src/tests/pdfraster.rs`).
- **Rasterize effect:** Effect › Rasterize… (`rasterize`) draws an object as an image of square pixels at its own resolution or the document's raster effects resolution, with Object › Rasterize's color model, background, anti-aliasing, clipping mask and room around the object, while its paths stay editable. Expand Appearance and PDF and SVG export of an object whose only raster effect is Rasterize give the image Object › Rasterize gives (`crates/engine/src/tests/rastersettings.rs`, `crates/render/src/tests/rasterize.rs`). Behavior reference: [How to save artwork in Illustrator](https://helpx.adobe.com/illustrator/using/saving-artwork.html), [Work with effects](https://helpx.adobe.com/illustrator/using/effects.html).
- **Rasterize colour models:** Object › Rasterize with the Grayscale colour model makes a grayscale image (a gray PNG, with alpha over a transparent background), and with Bitmap a 1-bit image (a TIFF), or a black-and-white gray PNG with alpha over a transparent background; `image.info` and the Control bar say Grayscale, and a fill color colorizes the image, in RGB and CMYK documents (#6969). Expand Appearance and PDF export of a Rasterize effect make the same images. Regression coverage: `rasterize_to_grayscale_or_bitmap_makes_a_grayscale_image` (`crates/engine/src/tests/rastersettings.rs`) and `gray_and_bilevel_images_store_gray` (`crates/render/src/encode/tests.rs`). Scores and estimates unchanged.
- **Rasterize dialog choices:** Object › Rasterize… shows Anti Alias (None, Art Optimized, Type Optimized) and Background (White, Transparent) as dropdowns, where they were text fields holding the command's values. Object › Create Gradient Mesh… shows its Appearance (Flat, To Center, To Edge) and Repeat Options for a grid repeat its Grid Type the same way (#8020, #7991). A value the dialog does not list, such as a black background set through `ui.dialog.set`, shows as it is and is sent unchanged. Regression coverage: `rasterize_anti_alias_and_background_are_dropdowns`, `mesh_appearance_and_repeat_grid_type_are_dropdowns` and `choice_fields_list_the_values_their_commands_take` (`crates/ui-egui/src/dialogs/command.rs`). Scores and estimates unchanged.
- **SVG filters:** Effect › SVG Filters lists 14 default SVG filters and then the document's own below Apply SVG Filter… and Import SVG Filter…, and choosing one applies it to the selection as a live effect in one undo step (`svgFilter.apply`). Apply SVG Filter applies the selected filter, New and Edit open its code, and Delete and Import… remove filters or add those of an SVG file (`svgFilter.define`, `svgFilter.delete`, `svgFilter.import`). The public page names no default set: the defaults (Soft Blur to Hue Shift, `crates/effects/src/svg_filter/defaults.rs`) are VectorCraft's own, written with SVG 1.1 primitives. A default is copied into the document when it is applied or edited, and Delete does not remove a default. The canvas, raster export and PDF draw the filter at the Document Raster Effects resolution; SVG export writes it as a `<filter>` element when it is the object's last effect and otherwise draws the object as an image; SVG import keeps filters the other live effects can't express as this effect instead of leaving them out; the native format keeps the filters (`crates/engine/src/tests/svgfilter.rs`, `crates/effects/src/svg_filter/tests.rs`). Behavior reference: [Apply SVG filter effects](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/apply-svg-filter-effects.html), [CS5 help, Apply SVG effects](https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=402), [SVG 1.1 Filter Effects](https://www.w3.org/TR/SVG11/filters.html).
- **Pattern tiles:** the renderer keeps a tile of each pattern for each scale it rasterizes the pattern at, until the tiles fill the tile cache's budget, and then drops the least recently used tiles first. Objects that show one pattern at different scales, such as a pattern scaled to 25% with Transform Pattern Tiles next to the same pattern at 100%, draw from tiles kept between frames.
- **Pattern fills in Expand:** Object › Expand with Fill turns a pattern fill into the pattern's tiles in a clip group shaped like the object, with the fill's opacity and blend mode, and the object's other fills and strokes stay above or below it in paint order, in one undo step (`object.expand`).
- **Gradient options for type in Expand:** the Expand dialog enables its gradient options for type, symbol art included, only when the outline of at least one character, ruby character, underline or strikethrough gets a gradient that Fill turns into art. A gradient that repeats or reflects in more than 256 runs across a character's outline, VectorCraft's own limit, stays a gradient after Expand (`object.expand.info`, `crates/engine/src/tests/objexpand.rs`).
- **Expand with Alt (Option):** choosing Object › Expand… in the in-window menu bar with Alt (Option on macOS) held expands the selection at once, in one undo step, with the choices OK last expanded with in the Expand dialog ([the help page](https://helpx.adobe.com/illustrator/desktop/manage-objects/arrange-objects/expand-objects.html) describes this shortcut for a gradient), and the dialog opens on those choices. VectorCraft's own rules: the shortcut applies to every expandable selection, the choices are kept until the app quits, the dialog's defaults apply before the first OK, and when none of the choices has something to expand in the selection the dialog opens instead (`ui.expandDialog`'s `immediate`).
- **Type with transparency or effects:** type at less than 100% opacity, in a blend mode other than Normal, or with raster effects such as a drop shadow keeps its glyph outlines between frames, as opaque type does, and is laid out again when it is edited or the fonts change. At 2880 × 1800 on 8 threads, a page of 1,000 type objects takes 13 ms a frame instead of 23 ms at 80% opacity, 31 ms instead of 41 ms in Multiply and 16 ms instead of 26 ms with a drop shadow, with the same pixels.
@@ -2165,6 +2283,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **Live objects in documents with many symbols:** a live object, or an object with effects, that shows symbols or patterns is not walked again in a later frame to find them while the document's symbols and patterns stay the same. One that shows a placed file is walked in every frame. At 1000 × 1000 pixels, a page of 2,000 envelopes around instances of the last 2,000 of 10,000 symbols takes 30 ms a frame, and 83 ms when every frame walks them again, with the same pixels.
- **Control bar and task bar on large paths:** the Control bar and the contextual task bar read the first selected object in place each frame instead of copying it; the task bar copies the object only when it is a basic shape, for its Shape Properties. With one selected open path of 200,000 anchors, an idle frame with both bars shown takes 3.8 ms in a release build instead of 8.0 ms (medians of five interleaved runs). Tests: `the_control_bar_label_follows_edits_undo_documents_and_selection`, `the_task_bar_follows_the_active_document`, `the_task_bar_follows_edits_and_undo`.
- **Panels on large selections:** the Properties, Transform, Brushes, Appearance, Transparency and Image Trace panels read the selected object where the document holds it each frame instead of copying it, and the Transparency panel removes the mask from a copy of the object only when it draws the object's thumbnail again. With one selected open path of 200,000 anchors, an idle repaint uses 72.9 µs of CPU time in a release build instead of 88.4 µs for the Properties panel, 27.5 µs instead of 37.2 µs for the Appearance panel and 19.6 µs instead of 29.8 µs for the Transparency panel with its thumbnails shown (medians of seven interleaved runs). Tests: `first_selected_is_the_node_the_document_holds`, `first_subject_is_the_node_the_document_holds`, `panels_show_the_selected_object_after_an_edit_and_after_undo`, `state_holds_the_documents_node_and_the_object_thumbnail_leaves_out_the_mask`.
- **Paste of many objects:** Paste leaves pasted copies as they are when no resource has another name or color in the document and the objects link no graphic style. It looks up the pasted type in one walk of the tree. A paste and undo of 20,000 rectangles in 200 groups uses 49.2 ms of CPU time in a release build instead of 59.4 ms, and of 5,000 point type objects 25.3 ms instead of 29.4 ms (medians of seven interleaved rounds, each round the CPU time of a 61-paste run minus a 1-paste run, divided by 60). Tests: `crates/engine/tests/it/paste_many.rs`.
- **Type drawn as glyph outlines:** under a geometry effect, in EMF and WMF export, in DXF export when it is written as outlines, flattened with Convert All Text to Outlines, and inside an envelope, type keeps its underline and strikethrough, the weight and dashes of its character strokes when it is scaled, and the placement of its gradients and patterns, as the canvas draws it. A group's or layer's own fills and strokes also paint the underline and strikethrough of the type in it.
@@ -2255,6 +2374,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **The command sweep sends file and folder params into its temp folder by the command catalog:** the sweeps in `crates/engine/tests/command_sweep.rs` take each command's file and folder keys from the catalog (`cmd::location_keys`, the same key list the plug-in call rules use, less the keys that name part of the document in a command), read every key a params description names (`{path | name …}`, `{folder? (…)}` included) and its schema's params, and send every string under such a key, in arrays and in objects inside them (`paths: [{ids, path}]`), as a location in the temp folder, so a command added later is swept and checked without editing the sweep. `diffPath` counts as a file key, and Slice Options' `url` and Export for Screens' `folders` do not. Regressions: `sweep_cases_name_files_only_inside_the_temp_folder` and `sweep_cases_send_the_file_keys_of_the_command_catalog` in `command_sweep`, `location_keys_come_from_the_command_catalog` in `cmd::plugin_call`. Scores and hours unchanged.
- **A drag ended by a command with Real-time Drawing off:** when Undo, Redo, a filter that calls commands or a plug-in command that calls commands ends a drag whose preview Real-time Drawing off has not applied yet, the preview is applied first and kept as an undo step of its own, as releasing the drag keeps it; a preview that fails cancels the drag. The filter or plug-in command is then given the objects where the drag left them. Regressions: `crates/engine/src/tests/plugins.rs`, `crates/engine/src/tests/prefs.rs`. Scores and hours unchanged.
- **The warning of a preview applied when a command ends a drag:** a preview that Real-time Drawing off left unapplied, and that Undo, Clear History or another command applies before it runs, keeps its warning: the command's result carries it as `previewWarning`, and as `warning` when the command has none of its own, and the status bar shows it, as releasing the drag shows it. Typing kept as its own step when a tool's drag begins, or when Cmd lends the Selection tool, shows its applied preview's warning in the status bar too. Regressions: `settling_a_deferred_preview_keeps_its_warning` and `settling_typing_for_a_tool_shows_its_preview_warning` in `crates/engine/src/tests/prefs.rs`, `settled_warnings_join_the_result` in `crates/engine/src/session/execute.rs`. Scores and hours unchanged.
- **Typing kept when a dialog or a panel previews, with Real-time Drawing off:** a dialog's Preview, a panel's live slider, the Effect Gallery's preview, the font menus' preview, a paint for the characters the Type tool selected and an inline graphic inserted while typing first apply the typing that Real-time Drawing off left unapplied, as an undo step of its own, and the status bar shows that typing's preview warning. The Character, Paragraph and Tabs panels, Bullets and Numbering, Justification and the inline graphic then act on the characters the Type tool selected in the typed text. When the typing can't be kept, the status bar shows the error and the dialog's preview does not start. Regressions: `settling_typing_for_a_dialog_returns_its_preview_warning` in `crates/engine/src/tests/prefs.rs`, `ending_deferred_typing_for_another_edit_keeps_the_typing` in `crates/engine/src/tests/textedit.rs`, `inserting_while_deferred_typing_keeps_the_typing` in `crates/engine/src/tests/inline.rs`, `settled_typing_tests` in `crates/ui-egui/src/dialogs/form.rs`, `stack_preview_keeps_typing_in_progress` in `crates/ui-egui/src/dialogs/effect_gallery.rs`. Scores and hours unchanged.
- **Plug-in progress, Cancel and log lines (G17):** at plug-in API level 2 a plug-in with the `progress` permission imports `env.vc_progress`, `env.vc_cancelled` and `env.vc_log`. A heavy filter's and an export's progress windows show its progress as a percentage bar, their Cancel reaches it through `vc_cancelled`, a light filter with `progress` and no `commandAllowlist` runs in the background with the same progress window when it runs at once or OK runs it with Preview off, and its log lines go to the app's log with its id, capped per line and per run. Installing checks every import and names the one it refuses. Regressions: `crates/plugins/src/host.rs`, `crates/plugins/tests/abi.rs`, `crates/engine/src/tests/plugins.rs`, `crates/engine/tests/plugin_fuzz.rs`, `crates/ui-egui/src/tests/plugin_runs.rs`. Scores and hours unchanged.
- **Live-effect plug-ins paint their output (G17, #121):** a live effect whose manifest has `"api": 2` and `"paintOutput": true` returns pieces, each drawn by itself in order with fills and strokes of its own in the filter's paint forms (a piece without them keeps the object's; an empty list paints none; an effect on a fill returns only fills, one on a stroke only strokes). The whole result is checked first: limits, numbers in range with nothing clamped, known keys only, and the swatches and patterns it names in the document; one fault draws that step of the stack unchanged, keeps the effect record and puts the plug-in's name and the field in `plugin.info`'s `lastError`. The pieces are drawn, measured and exported to PDF and SVG from the appearance stack without changing the document, and Expand Appearance writes them as ordinary paths in one undo step. Effects without the key behave as before. Regressions: `crates/plugins/src/painted/tests.rs`, `crates/plugins/src/manifest.rs`, `crates/engine/src/tests/plugins.rs`, `crates/engine/tests/plugin_fuzz.rs`. Scores and hours unchanged.
- **Painted effects refuse gradient stop plates without a spot link (G17):** a gradient stop with process `plates` in a painted live effect's fill or stroke must link to a spot swatch of the document itself; a stop with no link, a `null` link or only the gradient's own `swatch` refuses the whole result, and so does a link to a process swatch or Registration, also when a cached result's swatch stops being a spot swatch. `lastError` names the stop's `plates`. Regressions: `crates/plugins/src/painted/tests.rs`, `crates/plugins/src/effect.rs` (`cached_painted_plates_refuse_after_spot_becomes_process`). Scores and hours unchanged.
@@ -2337,10 +2457,20 @@ applies to fills). Tests: `color::gradient::tests` (perceptual midpoint, expansi
`pdf::tests::dithered_perceptual_gradients_export_as_images_with_noise_on_the_fill` and the Gradient panel's
`the_method_menu_makes_the_gradient_perceptual`. Scores and hours unchanged.
A saved `.ai`'s editing data writes a Perceptual gradient, in the art and in the Swatches panel, as a classic gradient of
the stops on its curve in process colors (at most 256, the stops VectorCraft's reader reads), as it writes a gradient
mixed around the hue wheel, so the file opens with the colors between the stops it had; a gradient definition's stops
there hold no interpolation method (`crates/eps/src/import/ai/paint.rs:193-245` reads each `Bs` stop's color, opacity,
midpoint and ramp point). The warning names Perceptual gradients, and a stop linked to a global process color reports
its lost link; Dither's noise is reported as its own loss (VectorCraft's own rules). Test:
`ai_editing::tests::perceptual_gradients_are_written_with_the_stops_on_their_curve`.
PDF export writes a Perceptual linear or radial gradient whose stops are tints of one spot color (and paper white) as a Separation shading in that ink instead of an image, so the ink keeps its plate ([swatches](https://helpx.adobe.com/illustrator/using/using-creating-swatches.html); [separations](https://helpx.adobe.com/illustrator/using/printing-color-separations.html)). Its tints follow the curve's stops, each the tint with the OKLab lightness of the color there (VectorCraft's own rule). A Perceptual gradient that mixes spot colors with each other or with CMYK or gray stops is written as a DeviceN shading of its inks: at each stop on the curve, the inks of the two stops on either side are mixed at the weight where the two colors mixed in display RGB have the OKLab lightness of the color there, or at the stop's mix position between the two colors when that mix's lightness turns back on the way from one color to the other, as from red to blue (VectorCraft's own rule). Dithered fills, freeform gradients, Perceptual gradients that mix a spot color with RGB or Lab stops, and Perceptual gradients whose curve has more than 4,096 stops once expanded (VectorCraft's own limit) are still images, and the export warns that their spot colors are written in process colors. In a CMYK document, or an export that converts colors to a CMYK destination profile, RGB and Lab stops are written in CMYK, so a Perceptual gradient that mixes a spot color with them is a DeviceN shading; an export that converts colors to an RGB destination profile keeps them in RGB. Tests: `color::gradient::tests::ink_tints_follow_the_perceptual_curve`, `ink_mixes_follow_the_perceptual_curve` and `ink_mixes_use_the_mix_position_when_the_lightness_turns_back`, `engine::tests::linked_stops::perceptual_spot_gradients_export_as_separation_shadings`, `perceptual_spot_gradients_mixed_with_other_inks_export_as_device_n_shadings`, `perceptual_spot_gradients_with_rgb_stops_in_a_cmyk_document_export_as_device_n_shadings` and `spot_gradients_drawn_as_images_warn`.
In these Separation and DeviceN shadings, a white stop linked to a swatch that is not a spot color (a global White swatch, for example) is paper white, 0% of the ink, as an unlinked white stop is, so a gradient of one spot ink and such a stop stays a Separation shading; a stop linked to a white spot color stays a stop of that ink (VectorCraft's own rule). Test: `engine::tests::linked_stops::white_stops_linked_to_process_swatches_are_paper_in_spot_gradients`.
Legacy `.ai` export writes a Perceptual gradient as it writes a gradient mixed around the hue wheel: the colors on its curve become stops of their own, in process colors, at most 256, in a gradient definition of their own rather than the gradient swatch's, with a warning. In a legacy `.ai` gradient definition, each color stop holds only its color, midpoint and position (`colorSpec colorStyle midPoint rampPoint %_Bs`, [File Format Specification §3.5.2](https://web.archive.org/web/20050126105313/https://partners.adobe.com/public/developer/en/illustrator/sdk/AI7FileFormat.pdf#page=41)). VectorCraft's legacy `.ai` reader opens such a gradient as a Classic gradient and mixes the stop colors directly. Spot color stops lose their inks, as they do in EPS (VectorCraft's own rule). Test: `eps::legacy_ai::tests::perceptual_gradients_are_written_with_the_stops_on_their_curve`.
## Artwork Cleanup add-on (2026-10-30)
A VectorCraft addition, not a feature of the reference app, so no area score moves. Object › Plug-ins › Artwork Cleanup and its
@@ -2532,6 +2662,10 @@ A VectorCraft addition, not a feature of the reference app, so no area score mov
A VectorCraft addition, not a feature of the reference app (it has no command for this), so no area score moves. Object › Plug-ins › Type Tools › Release Type on a Path… splits each selected type on a path into point type holding the same text and the plain path it was set on, or keeps only one of them (#5532). The path keeps its exact shape (open or closed, anchors and handles, the object's transform), layer and place in the stacking order, with no fill and no stroke since type paths carry no paint of their own. The text keeps its runs, character and paragraph attributes and becomes point type on one straight line whose baseline starts where the first character sat on the path; Type on a Path Options don't apply to point type and are dropped. Keep Original leaves the type on a path and adds the released objects above it. Other objects are left alone and a selection with no type on a path makes no undo step; otherwise the run is one undo step, the released objects are selected, and the dialog's Preview works as Type on a Path Options' does (#5360). Tests: `cmd::addons::typetools::tests::release` in `vectorcraft-engine` (each mode, Keep Original, mixed and empty selections, closed, open, curved and flipped paths, transformed and grouped type, multi-style and unicode text with a centred paragraph, empty type, undo and redo, preview, cancel and commit, bad params refused), `release_type_on_a_path_previews_cancels_and_runs_on_ok` in `vectorcraft-ui-egui` and `command_sweep`. Commands: `docs/mcp.md` › Type Tools add-on › Release Type on a Path.
## Unit Converter add-on (2026-11-14)
A VectorCraft addition, so no area score moves. Object › Plug-ins › Unit Converter opens a panel with one number field per unit of Preferences › Units › East Asian Type (pt, picas, in, mm, cm, px, ft & in, m, yd, ft, Q, Ha), as proposed in #5528. A length typed in any field, with units and arithmetic as every number field reads them, updates the others as it is typed; text that does not read leaves them as they were. From Selection reads the selection's width and height as the Transform panel measures them, Width or Height picks which one the fields show, and Apply sets that side of the selection through `object.setBounds` as the Transform panel's W or H field does (its reference point, Constrain Width and Height Proportions and its Transform Object Only, Pattern Only or Both choice) as one undo step, with no step when the size is already that length. Each field's copy button copies its value, with its unit when Copy with Units is on. Agents use `addon.units.convert` and `addon.units.selectionSize`, which change nothing in the document (`docs/mcp.md`). Tests: `cmd::addons::units::tests` in `vectorcraft-engine` (every unit, number-field syntax, preview bounds and selected anchors, bad params and unknown keys refused), `addons::units::tests` in `vectorcraft-ui-egui` (typing, From Selection and a changed selection, Apply with the Transform panel's reference point, proportions, pattern choice and a symbol's registration point, copy, screen-reader names) and `command_sweep`.
## Cutting Tools add-on: Stencil Bridges (2026-11-12)
A VectorCraft addition, so no area score moves. Object › Plug-ins › Cutting Tools › Stencil Bridges… cuts strips of a set width (0.01 to 1000 pt, 2 by default) out of the selected art so that a stencil cut from it keeps its islands, such as the inside of an O or a hole in a shape, attached to the sheet ([stencil islands and bridges](https://en.wikipedia.org/wiki/Stencil)). Every island is joined to the sheet, directly or through another island, by the shortest crossings that fit, then gets more bridges spread around it up to the count asked for (1 to 16); bridges run vertically, horizontally or along the shortest crossing among 12 directions 15° apart. The art is measured by the area its outlines enclose (hidden objects left out), type by its glyph outlines without converting the type, and becomes one compound path with the gaps cut; the selected objects that make up the art go to a new hidden layer, Stencil Original, or are replaced, and selected objects with no outlines stay where they are. Art with no islands is left as it is with a message and no undo step, islands the cut result still encloses are counted and reported, and the run is one undo step. Tests: `addons::stencil::tests` in `vectorcraft-pathops` (an O, two holes, nested islands, curved outlines, width, direction, the shortest crossing at an angle, more bridges per island and their spacing, narrow islands, slivers, outlines that touch at a corner, the curve tolerance, open outlines, limits and the work budget), `cmd::addons::cutting::stencil::tests` in `vectorcraft-engine` (the hidden layer and undo, replacing, width with units, type, hidden group members, objects with no outlines, the result's paint, kind and place in the stacking order, no islands, narrow islands, bad params refused), `stencil_bridges_opens_its_dialog_and_runs_on_ok` in `vectorcraft-ui-egui` and `command_sweep`. Commands: `docs/mcp.md` › Cutting Tools add-on › Stencil Bridges.
@@ -2566,7 +2700,9 @@ A VectorCraft addition, not a feature of the reference app, so no area score mov
## Path Precision Tools add-on: Trim at Crossings (2026-11-13)
A VectorCraft addition, not a feature of the reference app, so no area score moves. Object › Plug-ins › Path Precision Tools › Trim at Crossings Tool (kept out of the shipped toolbars, listed in the All Tools drawer, no shortcut) removes stretches of paths between the places where they are crossed by another path or by themselves, on any path that can be edited, selected or not. A click removes the stretch under the pointer, a drag removes every stretch its rectangle touches, and an Alt-drag removes every stretch its freehand line crosses; each is one undo step, and Escape during a drag removes nothing. A closed path that loses a stretch becomes open, an open path that loses a middle stretch becomes two paths with its appearance in its place in the stacking order, a path that nothing crosses is removed whole, and the stretches that stay get no new anchors. Hidden and locked paths, guides and clipping paths are not trimmed and do not count as crossing. Add Points at / Split at Crossings share the crossing search: segments that meet at an anchor now count where they cross again elsewhere, and with Self Crossings a curved segment that loops over itself crosses itself. Command `addon.pathtools.trim`; `vectorcraft_pathops::addons::pathtools::{crossings_on, spans, without_spans}`. Hovering shows in red the stretch a click would remove, worked out by the same code the command uses (`vectorcraft_tools::addons::trim::plan`), and a drag that reaches at most 32 paths shows what its release would remove; a preview spends at most a twentieth of the crossing work a click may (2026-11-15; tests `hovering_*`, `in_isolation_mode_*`, `a_path_whose_crossings_*` and `a_small_drag_*` in `addons::trim` in `vectorcraft-tools`, `hovering_with_the_tool_shows_the_stretch_its_click_removes` and `what_the_tool_shows_*` in `vectorcraft-engine`). Not yet: crossings with type, images and symbol instances. Tests: `crossings_on_*`, `segments_*`, `a_segment_that_loops_over_itself_crosses_itself`, `one_work_budget_*`, `spans_divide_*`, `a_subpath_without_*` and `a_slice_*` in `addons::pathtools::tests` in `vectorcraft-pathops`, `addons::trim` in `vectorcraft-tools` (click, rectangle, freehand line, Escape), `cmd::addons::pathtools::trim::tests` in `vectorcraft-engine` (a middle and an end stretch, a closed path opening, a rectangle and a line as one undo step, locked and hidden paths, guides and clipping paths, paths nothing crosses, compound path members, the selection, 3,000 other paths, a path too large to search left alone until touched, bad params refused), `the_plugins_submenu_selects_the_tools_and_opens_the_anchor_inspector` in `vectorcraft-ui-egui`, `edit_toolbar::tests` and `command_sweep`. Commands: `docs/mcp.md` › Path Precision Tools add-on.
A VectorCraft addition, not a feature of the reference app, so no area score moves. Object › Plug-ins › Path Precision Tools › Trim at Crossings Tool (also in the Scissors tool's group in both shipped toolbars, after the Knife, since 2026-11-16; a toolbar edited before keeps its saved layout until Reset Toolbar; no shortcut) removes stretches of paths between the places where they are crossed by another path or by themselves, on any path that can be edited, selected or not. A click removes the stretch under the pointer, a drag removes every stretch its rectangle touches, and an Alt-drag removes every stretch its freehand line crosses; each is one undo step, and Escape during a drag removes nothing. A closed path that loses a stretch becomes open, an open path that loses a middle stretch becomes two paths with its appearance in its place in the stacking order, a path that nothing crosses is removed whole, and the stretches that stay get no new anchors. Hidden and locked paths, guides and clipping paths are not trimmed and do not count as crossing. Add Points at / Split at Crossings share the crossing search: segments that meet at an anchor now count where they cross again elsewhere, and with Self Crossings a curved segment that loops over itself crosses itself. Command `addon.pathtools.trim`; `vectorcraft_pathops::addons::pathtools::{crossings_on, spans, without_spans}`. Hovering shows in red the stretch a click would remove, worked out by the same code the command uses (`vectorcraft_tools::addons::trim::plan`), and a drag that reaches at most 32 paths shows what its release would remove; a preview spends at most a twentieth of the crossing work a click may (2026-11-15; tests `hovering_*`, `in_isolation_mode_*`, `a_path_whose_crossings_*` and `a_small_drag_*` in `addons::trim` in `vectorcraft-tools`, `hovering_with_the_tool_shows_the_stretch_its_click_removes` and `what_the_tool_shows_*` in `vectorcraft-engine`). Not yet: crossings with type, images and symbol instances. Tests: `crossings_on_*`, `segments_*`, `a_segment_that_loops_over_itself_crosses_itself`, `one_work_budget_*`, `spans_divide_*`, `a_subpath_without_*` and `a_slice_*` in `addons::pathtools::tests` in `vectorcraft-pathops`, `addons::trim` in `vectorcraft-tools` (click, rectangle, freehand line, Escape), `cmd::addons::pathtools::trim::tests` in `vectorcraft-engine` (a middle and an end stretch, a closed path opening, a rectangle and a line as one undo step, locked and hidden paths, guides and clipping paths, paths nothing crosses, compound path members, the selection, 3,000 other paths, a path too large to search left alone until touched, bad params refused), `the_plugins_submenu_selects_the_tools_and_opens_the_anchor_inspector` in `vectorcraft-ui-egui`, `edit_toolbar::tests` and `command_sweep`. Commands: `docs/mcp.md` › Path Precision Tools add-on. The tool shows the Knife's cursor, now drawn as a knife with the blade's point on the hotspot (2026-11-16; tests `trim_at_crossings_is_in_the_scissors_flyout` and `a_saved_toolbar_without_trim_at_crossings_keeps_its_layout` in `edit_toolbar::tests`, `trim_at_crossings_is_in_the_scissors_group_once` in `addons::tests`, `headless_backend_methods` in `vectorcraft-mcp`, `the_knife_shows_a_knife_with_its_point_on_the_hotspot` in `cursors::tests` and `drawing_tools_show_their_own_cursor` in `vectorcraft-tools`).
A trim reads the selection through a set and changes it once at the end, instead of going through the selected objects once for each trimmed path and each piece, with the same resulting selection as before. With 2,000 selected lines each split in two, the selection update took 7.7 ms and now takes 0.2 ms (the whole command about 75 ms); with 7,000 lines it took 96 ms and now takes 0.7 ms. The times are wall-clock medians of 7 runs while other builds shared the CPU. Test: `the_selection_after_a_trim_is_the_one_changing_it_one_id_at_a_time_gives` in `cmd::addons::pathtools::trim::tests` in `vectorcraft-engine`.
## Document Tools add-on: Save a Timestamped Copy (2026-11-01)
@@ -2633,7 +2769,7 @@ Auto Spell Check followed (2026-11-09): the same page has Edit › Spelling ›
The right-click followed (2026-11-10), as the same page's "Correct spelling errors during Auto Spell Check" describes it: right-click a word with a red underline, then choose a suggested word, Ignore All to skip it in the current document, or Add to Dictionary (#4936). The canvas context menu lists the words `text.spelling.suggest` gives for it in its run's language, each replacing the word with `text.editRange` as one undo step, or No Suggestions; then Ignore All (`text.spelling.ignoreAll`) and Add to Dictionary (`text.spelling.addWord`). It lists nothing for a word that is right, with Auto Spell Check off, or once the word under the right-click has changed (`ui-egui/src/tests/contextmenu.rs`). The dialogs remain.
The page's other way to turn Auto Spell Check on followed (2026-11-10): right-click the text and choose Spelling › Auto Spell Check (#4936). A right-click on type (which selects it) has a Spelling submenu with Auto Spell Check, which runs `edit.autoSpellCheck` as Edit › Spelling does. The context menu draws no check marks, its toggles saying what they do (Show Rulers, Hide Guides), but a submenu that holds only toggles shows them, so Auto Spell Check is checked while it is on; other art has no Spelling submenu (`right_click_on_type_turns_auto_spell_check_on_and_off`).
The page's other way to turn Auto Spell Check on followed (2026-11-10): right-click the text and choose Spelling › Auto Spell Check (#4936). A right-click on type (which selects it) has a Spelling submenu with Auto Spell Check, which runs `edit.autoSpellCheck` as Edit › Spelling does. The context menu draws no check marks, its toggles saying what they do (Show Rulers, Hide Guides), but a submenu that holds only toggles shows them, and so does Spelling, so Auto Spell Check is checked while it is on; other art has no Spelling submenu (`right_click_on_type_turns_auto_spell_check_on_and_off`). Check Spelling… followed in the same submenu (2026-11-15), after Auto Spell Check as in Edit › Spelling, as the page also describes opening the Check Spelling dialog from Spelling in the menu of right-clicked text. It runs `ui.checkSpelling` on the selection, which the right-click made the type under the pointer, and a right-click on an underlined word has it too (`right_click_on_type_opens_check_spelling`, `right_click_on_an_underlined_word_also_offers_check_spelling`).
Edit Custom Dictionary followed (2026-11-10), as the same page's "Edit the custom dictionary" describes it: Edit › Edit Custom Dictionary…, then enter a word in the Entry field and Add it, select a word and Delete it, or select a word, edit it in the Entry field and Change it, then Done (#4936). The dialog lists the custom dictionary's words (`text.spelling.dictionary`); picking one puts it in the Entry field. Add and Change take one word that isn't listed yet, kept in lower case as the dictionary keeps it, and Delete and Change need a word picked. Nothing changes until Done, which deletes and adds the words that differ (`text.spelling.removeWord`, `text.spelling.addWord`); Cancel leaves the dictionary as it was (`ui-egui/src/dialogs/custom_dictionary.rs`).
@@ -2703,6 +2839,9 @@ Edit › Copy and Cut put the selected ruler guides on the clipboard, with the s
| Date | Change | Summary |
|---|---|---|
| 2026-11-16 | minor | Layers panel: rows or the selected-art square dragged over the list show the copy cursor while Alt is held, as the drop then copies, and the grabbing hand otherwise (#8217). Scores and estimates unchanged. |
| 2026-11-16 | minor | Gradient panel: the strip under the ramp, where a click adds a stop, shows the white arrow with a plus on Windows and X11, where the system copy cursor showed as the plain arrow (#8241). Scores and estimates unchanged. |
| 2026-11-16 | minor | Properties panel: while the Type tool edits text, the Character section shows the font family and style and the Variable Font button of the first selected character (or of the character before the caret), not those of the text object's first run (#8189). Evidence: `panels::properties::tests::character_section_shows_the_type_tool_selections_style`. Scores and estimates unchanged. |
| 2026-11-16 | minor | Recolor Artwork follow-up (#8031, remaining #4028): native Lab input, picker swatch libraries and Assign-row menus; UI interaction regression coverage; scores and estimates unchanged. |
| 2026-11-16 | minor | Color panel: the spectrum fills the vertical space of a resized panel, with options shown or hidden (#8005). Compact auto-fit flyouts and embedded mixers keep their existing size. Evidence: panels::color::tests::the_spectrum_grows_with_the_color_panel. Scores and estimates unchanged. |
| 2026-11-14 | minor | Paragraph composers (#4935): `text.setFormat {composer}` and paragraph styles take `singleLine` and `everyLine` (the Middle Eastern & South Asian composers, what all type used and the default) and `standardSingleLine` and `standardEveryLine`, which break lines the same way and set a complex script (Indic, Arabic, Hebrew) glyph by glyph as the font maps its characters, with no conjuncts, reordering, marks placed or joining forms. The choice is per paragraph, saved in the native file only when it is not Every-line, and not written to `.ai`, EPS or PDF files, whose composer setting this app has no recorded format for. Scores and estimates unchanged. Tests `tests::composers`. |
+5 -5
View File
@@ -26,7 +26,7 @@ against Illustrator's public documentation; **estimated** unless noted.
| Point, area and type-on-a-path type; vertical variants | done / partial | vertical point, area and path type have initial support; fullwidth `!` / `?` keep the nominal glyph upright when no vertical alternate exists (Unicode Tu); in a non-rectangular area a word too wide for the top lines moves down to the first line that holds it (#1615); Escape while typing ends the edit, keeps the type selected and switches back to the tool whose double-click on type chose the Type tool (kept until another tool is chosen or another document or window becomes active, so later edits with the Type tool return there too), or to the Selection tool when there is no such tool, as when the Type tool was chosen from the toolbar or after such a switch (#1802), and Cmd+Enter (Ctrl+Enter on Windows and Linux) does the same unless a command is bound to it; `text.create` and `text.createInPath` take `justify` (#1752); MCP `add_text` forwards `vertical` to both commands; Type › Type Orientation sets every frame of a thread, and a thread's frames share one writing direction; the Type and Vertical Type tools make area type when a closed path's outline is clicked and type on a path when an open one is, with pointers that say which, as the public help describes ([Create text](https://web.archive.org/web/20220127090642/https://helpx.adobe.com/illustrator/using/creating-text.html), [Create type on a path](https://web.archive.org/web/20220127090635/https://helpx.adobe.com/illustrator/using/creating-type-path.html)) |
| Area Type Options (rows, columns, inset, first baseline, Text Flow by rows or by columns, Auto Size, Shrink Text to Fit) | done | Text Flow fills the cells down each column first (By Columns, the default, as files from before it open) or across each row first (By Rows), in the dialog and `text.areaOptions {flow}` (#4978); the commands that make or restyle type say when it does not fit its frame; MCP `add_text` takes Auto Size and Shrink Text to Fit (#1471) |
| Threaded text, Fit Headline, Text Wrap | done | Fit Headline sees wrapping in a frame one line tall (#1444); a thread holds area type and type on a path in any mix, as Illustrator links type in an area or along a path ([help](https://helpx.adobe.com/illustrator/using/manage-text-area.html)); a frame's empty last paragraph keeps a format given to it when the story flows again |
| Threading from the ports: selected area type and type on a path show an in port and an out port, empty, with an arrow on a side where the frame is threaded, or with a red "+" in the out port when the text doesn't fit; a click on either port loads the text; a click on a closed path, area type or type on a path threads into it, a click on empty canvas makes a frame of the same kind, shape and size there, a drag draws a rectangular frame; the frame placed comes after the clicked one from its out port and before it from its in port (the story then starts there); Escape or another tool cancels; a double-click on a threaded port breaks the thread there | partial | #2572: the Selection tool, `text.thread.add {from, to?, rect?, at?, before?}`, as the reference app's help describes ports and threading ([archived help, Threading text between objects](https://web.archive.org/web/20210119051048/https://helpx.adobe.com/illustrator/using/creating-text.html), [create text threads](https://helpx.adobe.com/illustrator/desktop/design-with-text/add-manage-text/create-text-threads-between-objects.html)); area type's in port sits on the left side below the top-left corner, type on a path's just before its start bracket; Show Text Threads draws its lines between the same ports; with more than 1,000 such objects selected no ports are drawn. a double-click on a port where the frame is threaded breaks the thread there, the story flowing into the frames before the break and the frames after it left empty, still threaded with each other when two or more (`text.thread.break`, [archived help](https://web.archive.org/web/20220127090642/https://helpx.adobe.com/illustrator/using/creating-text.html)). Remaining: the ports only take clicks with the Selection tool, and the loaded cursor borrows the I-beam until it's drawn |
| Threading from the ports: selected area type and type on a path show an in port and an out port, empty, with an arrow on a side where the frame is threaded, or with a red "+" in the out port when the text doesn't fit; a click on either port loads the text; a click on a closed path, area type or type on a path threads into it, a click on empty canvas makes a frame of the same kind, shape and size there, a drag draws a rectangular frame; the frame placed comes after the clicked one from its out port and before it from its in port (the story then starts there); Escape or another tool cancels; a double-click on a threaded port breaks the thread there | partial | #2572: the Selection tool, `text.thread.add {from, to?, rect?, at?, before?}`, as the reference app's help describes ports and threading ([archived help, Threading text between objects](https://web.archive.org/web/20210119051048/https://helpx.adobe.com/illustrator/using/creating-text.html), [create text threads](https://helpx.adobe.com/illustrator/desktop/design-with-text/add-manage-text/create-text-threads-between-objects.html)); area type's in port sits on the left side below the top-left corner, type on a path's just before its start bracket; Show Text Threads draws its lines between the same ports; with more than 1,000 such objects selected no ports are drawn. a double-click on a port where the frame is threaded breaks the thread there, the story flowing into the frames before the break and the frames after it left empty, still threaded with each other when two or more (`text.thread.break`, [archived help](https://web.archive.org/web/20220127090642/https://helpx.adobe.com/illustrator/using/creating-text.html)). The loaded text has a cursor of its own; over a closed path, area type or type on a path that a click threads it into the pointer adds a link badge, as the [archived help on threading text between objects](https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf#page=476) describes the pointer changing over the object's path. The frame the text came from, a frame already in a thread, a path inside a compound path and other art show no badge, and a click there makes a new frame (`select::tests::loaded_text_shows_the_link_cursor_where_a_click_threads_it_into_the_object`). Remaining: the ports only take clicks with the Selection tool |
| Type on a Path effects and options; brackets | done | #429; Type on a Path Options has a Preview checkbox (#5360, as public tutorials of the dialog show); Direct Selection shows the anchors and direction handles of selected type on a path's path and drags both, the brackets keeping their fractions of the path and the text reflowing along it (#3980, #3565; `text.reshapePath`, `text.setPathHandle`), as the [Direct Selection page](https://helpx.adobe.com/illustrator/using/tool-techniques/direct-selection-tool.html) describes for a path; Type › Dynamic Text (`type.dynamicText`, also on the Contextual Task Bar) sizes type on a path to fill the span between its brackets and fits it again after each edit, as the [Dynamic Text overview](https://helpx.adobe.com/photoshop/desktop/text-typography/work-with-dynamic-text/dynamic-text-overview.html) describes; the 0.1 pt steps, the 0.1 to 1,296 pt range and keeping the drawn sizes when it is turned off or threaded are VectorCraft's own rules (`crates/text/src/tests/fit.rs`, `crates/engine/src/tests/dynamic_text.rs`) |
| Character and Paragraph panels, styles with overrides | done | Character-style Auto-leading resets, partial definitions, local leading overrides, override markers, Undo/Redo and native serialization have regression coverage; differing paragraph alignments leave the shared alignment buttons unselected (headless regressions, full integration CI and visual review pass); mixed-value display for other paragraph fields remains missing. Double-clicking a user character style's row opens its Character Style Options, and the dialog keeps a fixed width while its sections scroll when the window is shorter, so its buttons stay on screen; a paragraph style's row opens the same Paragraph Style Options dialog as the panel menu, with General, Basic Paragraph Formats, Tabs, Composition, Hyphenation, Justification and East Asian Composition Settings. Evidence: `panels::text_styles::tests::double_clicking_a_character_style_row_opens_its_options`, `dialogs::char_style_options::tests::the_sections_scroll_in_a_window_shorter_than_the_general_list`, `dialogs::para_style_options::tests::every_section_draws_its_fields`, `dialogs::para_style_options::tests::tabs_section_edits_the_style_stops` |
| Copy or Cut selected characters, then paste as separate text art | done | A Type-range copy keeps the selected characters' font family, size and color when pasted on the canvas after leaving text editing, in the same document or another. On desktop the clipboard offers plain text to text consumers and rich art for canvas Paste; Paste Without Formatting while editing uses the destination text's style. `tests::clipboard::type_range_copy_stays_styled_when_pasted_as_art` (#5636) |
@@ -46,11 +46,11 @@ against Illustrator's public documentation; **estimated** unless noted.
| System Layout | done | Character panel menu › System Layout, `type.systemLayout`: the whole document, off by default and for documents from before it, saved only when on. On, every text object advances by whole points (at least one when a character takes space). New point, area and path type, threaded frames, placed text, graph and dimension labels and pasted plain text inherit it. Evidence: `tests::system_layout_rounds_positive_advances_to_whole_points`, `typecmd::area_tests::system_layout_sets_the_document_and_every_text_object`, `panels::character::tests::system_layout_menu_item_toggles_the_document` |
| Fractional Widths | done | Character panel menu › Fractional Widths, `type.fractionalWidths`: per type object, and every frame of its threads. On by default and for documents from before it; saved only when off. Off, each character that takes space advances by a whole number of points, at least one, so small type does not run together. Evidence: `tests::fractional_widths_off_rounds_positive_advances_to_whole_points`, `typecmd::area_tests::fractional_widths_is_set_per_object_and_saved_only_when_off`, `panels::character::tests::fractional_widths_menu_item_toggles_the_type_object` |
| Roman Hanging Punctuation | done | Paragraph panel menu › Roman Hanging Punctuation, `text.setFormat {romanHangingPunctuation}` (#2756): per paragraph, Optical Margin Alignment's punctuation and amounts without the letters; paragraph styles carry it. Evidence: `tests::roman_hanging_punctuation_hangs_punctuation_but_not_letters`, `typecmd::area_tests::roman_hanging_punctuation_is_set_per_paragraph_and_saved_only_when_on`. Whole paragraphs hang as published with both composers, ragged, centred and justified, with Line-end Punctuation Half Width and bidirectional lines; Justification's Glyph Scaling leaves the hung marks at their width, and Standard burasagari counts what hangs at a line's start as room before hanging a comma (`tests_hang`) |
| Hyphenation… and Justification… options | done | Eleven Indian languages use attributed patterns and preserve syllables in both composers (#4947). Hyphenation… (`ui.hyphenation`, `text.setFormat`) sets each paragraph's Words Longer Than, After First, Before Last, Hyphen Limit, Hyphenation Zone (Single-line Composer only) and Hyphenate Capitalized Words, and paragraph styles carry them (#2310). Justification… (`ui.justification`, `text.setFormat`, #2755) sets Word Spacing, Letter Spacing and Glyph Scaling (Minimum, Desired, Maximum), Auto Leading and Single Word Justification; Desired applies to every line, justified lines and the Every-line Composer use the ranges. Vertical type isn't glyph scaled; type on a path doesn't use them. Evidence: `crates/text/src/tests/justify.rs`, `dialogs::justification::tests` |
| Hyphenation… and Justification… options | done | Eleven Indian languages use attributed patterns and preserve syllables in both composers (#4947). Hyphenation… (`ui.hyphenation`, `text.setFormat`) sets each paragraph's Words Longer Than, After First, Before Last, Hyphen Limit, Hyphenation Zone (Single-line Composer only) and Hyphenate Capitalized Words, and paragraph styles carry them (#2310). Justification… (`ui.justification`, `text.setFormat`, #2755) sets Word Spacing, Letter Spacing and Glyph Scaling (Minimum, Desired, Maximum), Auto Leading and Single Word Justification; Desired applies to every line, justified lines and the Every-line Composer use the ranges. Vertical type isn't glyph scaled. Evidence: `crates/text/src/tests/justify.rs`, `dialogs::justification::tests` |
| Roman Hanging Punctuation | done | Paragraph panel menu › Roman Hanging Punctuation, `text.setFormat {romanHangingPunctuation}` (#2756): per paragraph, Optical Margin Alignment's punctuation and amounts without the letters; paragraph styles carry it. Evidence: `tests::roman_hanging_punctuation_hangs_punctuation_but_not_letters`, `typecmd::area_tests::roman_hanging_punctuation_is_set_per_paragraph_and_saved_only_when_on` |
| Hyphenation… and Justification… options | done | Eleven Indian languages use attributed patterns and preserve syllables in both composers (#4947). Hyphenation… (`ui.hyphenation`, `text.setFormat`) sets each paragraph's Words Longer Than, After First, Before Last, Hyphen Limit, Hyphenation Zone (Single-line Composer only) and Hyphenate Capitalized Words, and paragraph styles carry them (#2310). Justification… (`ui.justification`, `text.setFormat`, #2755) sets Word Spacing, Letter Spacing and Glyph Scaling (Minimum, Desired, Maximum), Auto Leading and Single Word Justification; Desired applies to every line, justified lines and the Every-line Composer use the ranges. Vertical type isn't glyph scaled; type on a path doesn't use them. Auto Leading also sets the Leading the Character panel shows for Auto type, the leading Alt+↑/↓ (`type.step`) steps from, per paragraph, and the lines Fill with Placeholder Text counts. Evidence: `crates/text/src/tests/justify.rs`, `dialogs::justification::tests`, `tests_prefs::auto_leading_steps_and_fills_from_the_paragraph_auto_leading`, `panels::character` test `leading_field_shows_the_paragraph_auto_leading` |
| Hyphenation… and Justification… options | done | Eleven Indian languages use attributed patterns and preserve syllables in both composers (#4947). Hyphenation… (`ui.hyphenation`, `text.setFormat`) sets each paragraph's Words Longer Than, After First, Before Last, Hyphen Limit, Hyphenation Zone (Single-line Composer only) and Hyphenate Capitalized Words, and paragraph styles carry them (#2310). Justification… (`ui.justification`, `text.setFormat`, #2755) sets Word Spacing, Letter Spacing and Glyph Scaling (Minimum, Desired, Maximum), Auto Leading and Single Word Justification; Desired applies to every line, justified lines and the Every-line Composer use the ranges. Vertical type isn't glyph scaled. Auto Leading also sets the Leading the Character panel shows for Auto type, the leading Alt+↑/↓ (`type.step`) steps from, per paragraph, and the lines Fill with Placeholder Text counts. Evidence: `crates/text/src/tests/justify.rs`, `dialogs::justification::tests`, `tests_prefs::auto_leading_steps_and_fills_from_the_paragraph_auto_leading`, `panels::character` test `leading_field_shows_the_paragraph_auto_leading` |
| Tab stops and leaders; Tabs panel | partial | Tabs panel and stops with leaders in the model (`text.tabs.set`); a stop drags from where the press landed (#1458); leaders fill the tab's gap, repeated on a grid so they line up from line to line (#1877); Ctrl-dragging a stop (Command on macOS) moves all the stops together; in right-aligned area type the text before a line's last tab sits at its stops, from the left edge, and the text after it against the right edge, as Illustrator's own layout in a user's `.ai` sets a price list (evidence: `tests::right_aligned_area_type_sets_the_text_after_its_last_tab_against_the_edge`; centred lines are still aligned as a whole); in justified area type the text up to a line's last tab keeps its spacing and its tabs their stops, and the text after the last tab takes the line's room to the far edge, VectorCraft's own rule (evidence: `tests::justify::a_justified_line_with_a_tab_spreads_the_text_after_it_to_the_edge` and the other tab tests in `crates/text/src/tests/justify.rs`) |
| Hidden characters (Show Hidden Characters) | done | `type.hiddenCharacters` |
| Hidden characters (Show Hidden Characters) | done | `type.hiddenCharacters`: marks spaces, tabs, nonbreaking and narrow nonbreaking spaces, the spaces of a set width, discretionary hyphens, forced line breaks, paragraph ends and the story's end, in horizontal, vertical and right-to-left type and on a path; the mark shapes are VectorCraft's own. Evidence: `canvas::tests::hidden_characters_*` |
| Spell check (Check Spelling, Auto Spell Check, custom dictionary) | done | the engine (#4936): `text.spelling.check` lists the unknown words of the document's type, each run in its Language, at the bytes `text.editRange` changes, and `text.spelling.suggest` gives suggestions, both from craft-proof, each paragraph on its own (English from the first dictionary it finds: a Hunspell dictionary in the user's dictionaries folder, the SCOWL dictionary built in from craft-i18n, a system Hunspell dictionary, and last the public-domain Moby word list built into it; other languages from the dictionaries craft-proof finds for them). The custom dictionary commands are done: `text.spelling.addWord`, `removeWord` and `changeWord` (Add, and Edit Custom Dictionary's Add, Delete and Change), and `text.spelling.dictionary` lists the words, saved to `Custom Dictionary.txt` beside the preferences; Ignore All: `text.spelling.ignoreAll` skips a word in the active document while it is open. Auto Spell Check is done: Edit › Spelling › Auto Spell Check (`edit.autoSpellCheck`, off at first, saved with the view settings) draws a red wavy line under the unknown words of the visible type, leaves out type with effects, and follows edits, the custom dictionary and Ignore All. A right-click on an underlined word lists the words its dictionary suggests (each replaces it in one undo step, `text.editRange`), or No Suggestions, then Ignore All and Add to Dictionary, and a right-click on type has Spelling › Auto Spell Check, checked while it is on. Edit › Edit Custom Dictionary… lists the custom dictionary's words, with an Entry field and Add, Delete and Change, applied on Done (Cancel leaves the dictionary as it was). The modal Check Spelling dialog is done: Edit › Spelling › Check Spelling… (`Cmd+I`, `ui.checkSpelling`) opens a modal dialog displaying the unrecognized word in sentence context ("Not in Dictionary"), a list of suggestions with double-click or selection to replace ("Change to" field), and action buttons: Ignore, Ignore All, Change (one-step Undo/Redo via `text.editRange`), Change All (batched across occurrences in a single undo step), Add to Dictionary (`text.spelling.addWord`), Done and Cancel, with keyboard navigation (Tab between controls, Enter to Change or Done, Escape to close). Evidence: `crates/engine/src/tests/spelling.rs`, `crates/ui-egui/src/canvas/tests.rs` (`auto_spell_check_*`), `crates/ui-egui/src/tests/contextmenu.rs` (the right-click), `crates/ui-egui/src/dialogs/custom_dictionary.rs` (the dialog), `crates/ui-egui/src/dialogs/check_spelling.rs` (the Check Spelling dialog). |
| Smart Punctuation, Change Case, Find & Replace | done | Type › Smart Punctuation… opens a dialog with the ff, fi, ffi and ff, fl, ffl ligatures, Smart Quotes, Smart Spaces, En, Em Dashes, Ellipses and Expert Fractions, Replace In and Report Results, which lists the count of each replacement; ligatures and fractions are written only where the font has a glyph for them. Evidence: `tests::menucmds::smart_punctuation_ligatures_spaces_and_fractions_are_counted`, `smart_punctuation_skips_ligatures_and_fractions_the_font_lacks`, `smart_spaces_keeps_one_space_after_a_period`, `dialogs::smart_punctuation::tests::menu_item_opens_the_dialog_and_ok_reports_the_counts` |
| Alt + numeric-keypad codes while typing (Windows: `Alt+0176` → °) | partial | #5108: on Windows the character Windows posts when Alt comes up after keypad digits is typed at the caret like any other, in the typing's undo step, and the keypad digits typed with Alt run no shortcut. With NumLock off the keypad keys (Insert, End, arrows, Clear, Home, Page Up/Down without the extended-key flag) count as digits too and don't move the caret (`windows_alt_codes` unit tests; neither NumLock on nor off has been tried on a Windows machine yet). `type.insert {code}` (Windows Alt+0 code, Windows-1252 for 128–159) and `{unicode}` (hex code point) insert a character by its code (`menucmds::insert_a_character_by_its_code`). macOS and Linux have no such system convention and egui reports a keypad digit as the top-row digit, so there it does nothing; a floating panel window doesn't receive the character |
@@ -77,7 +77,7 @@ against Illustrator's public documentation; **estimated** unless noted.
| CJK: warichu | done | Character panel menu › Warichu and Warichu Settings… (`text.setFormat` / `text.setRangeStyle {warichu, warichuLines, warichuGap, warichuScale, warichuAlign}`, `ui.warichuSettings`), with Show East Asian Options ([Format East Asian characters](https://helpx.adobe.com/illustrator/using/formatting-asian-characters.html)): marked characters set at a percentage of their size and stacked on 1 to 6 lines inside their line, one above the other in horizontal type and side by side in vertical type, with a line gap and eight alignments; a block stays whole on one line. Saved natively, carried by character styles, drawn on the canvas and in every export (SVG, PDF and `.ai` write such type as outlines). Type on a path sets the characters at their own size. Evidence: `tests::warichu`, `dialogs::warichu::tests`, `typecmd::area_tests::warichu_is_a_character_attribute_set_saved_and_exported` |
| CJK: composite fonts | partial | Type › Composite Fonts… (`type.compositeFonts.set`), with Show East Asian Options: a font made of a font per class of character (Kanji, Kana, Punctuation, Symbols, Roman, Numerals), each with its own style, size and baseline in percent of the type's size, Kana, Roman and Numerals with horizontal and vertical scale, and Kana with Scale at Center; New, Delete Font, Import… and Export… (`.vccomposite`, `type.compositeFonts.import` and `.export`) ([Creating composite fonts](https://help.adobe.com/archive/en_US/illustrator/cs3/illustrator_cs3_help.pdf#page=347)); custom character sets (Custom: New, Delete Set, characters added by Direct Entry or Unicode code and deleted), each with its own font, style, size, baseline and scales, ahead of the classes, the later set winning a character two list (`custom` in `type.compositeFonts.set`) ([Customize characters in a composite font](https://web.archive.org/web/20220911143322/https://helpx.adobe.com/pdf/cs6/illustrator_reference.pdf#page=348)). Composite fonts are listed first in the font menus, saved with the document, and their type is laid out per set and class; SVG and legacy `.ai` write it as outlines. Show Sample draws the font picked with lines for its ICF box, em box, baseline, cap height, highest ascent and lowest descent, highest ascender and x-height, each shown or hidden by its button, at the Zoom picked ([Creating composite fonts](https://help.adobe.com/archive/en_US/illustrator/cs4/illustrator_cs4_help.pdf#page=352)). Not yet: the Units menu. Evidence: `text::composite::tests::characters_fall_in_their_classes`, `text::composite::tests::custom_sets_take_their_characters_before_the_classes`, `tests::composite::composite_type_draws_each_class_in_its_font`, `tests::composite::custom_character_sets_take_their_characters_first`, `compositefonts::tests`, `dialogs::composite_fonts::tests` |
| CJK: ruby | partial | ruby (ふりがな) for live text (`type.ruby`): a reading over a byte range, above (right of the column in vertical type) or below, start/centre/end alignment, size, overhang or squeeze; saved natively, laid out with its line growing, drawn on the canvas, in SVG and PDF (as outlines where ruby is present), in EPS, EMF/WMF and legacy `.ai` (legacy `.ai` writes type with ruby as outlines), and kept by Create Outlines, Expand Appearance and flattening, each glyph where the layout puts it (`typecmd::ruby_tests::create_outlines_keeps_the_ruby_where_it_is_laid_out`) | #633 |
| Language per character (Character panel › Language, character styles), text shaped in it | done | `text.setFormat` / `text.setRangeStyle {language}` by name or BCP 47 tag, one of Document Setup's languages (Hindi, Marathi, Gujarati, Bengali, Punjabi, Tamil, Telugu, Kannada, Malayalam, Odia and Urdu added, #4943; Assamese and Sanskrit added, #4947; Nepali, Konkani and Sindhi added, #4943; Serbian: Cyrillic, Serbian: Latin and Croatian; Bulgarian, #5945); the shaper gets the tag, so the font's language forms apply (OpenType `locl`: Turkish keeps `fi` apart and the dot on its i, #4940); new type takes the document's language; saved as the tag only when set, carried by character styles (#4946). English and eleven Indian languages hyphenate by run language; Sanskrit automatic hyphenation awaits allowlisted patterns (#4947). Not yet: `.ai`/PDF import of a text's language, paragraph styles. Evidence: `features::tests::language_picks_the_fonts_forms`, `features::tests::serbian_gets_the_fonts_serbian_forms`, `typecmd::area_tests::language_is_a_character_attribute_saved_only_when_set`, `tests::typo::indic_language_runs_hyphenate_with_both_composers`, `hyphen::tests::sanskrit_without_allowlisted_patterns_uses_only_exceptions`, `tests::docsetup::the_further_indian_languages_are_document_and_text_languages`; spelling is checked in each run's Language (`text.spelling.check`, #4936) |
| Language per character (Character panel › Language, character styles), text shaped in it | done | `text.setFormat` / `text.setRangeStyle {language}` by name or BCP 47 tag, one of Document Setup's languages (Hindi, Marathi, Gujarati, Bengali, Punjabi, Tamil, Telugu, Kannada, Malayalam, Odia and Urdu added, #4943; Assamese and Sanskrit added, #4947; Nepali, Konkani and Sindhi added, #4943; Serbian: Cyrillic, Serbian: Latin and Croatian; Bulgarian, #5945); the shaper gets the tag, so the font's language forms apply (OpenType `locl`: Turkish keeps `fi` apart and the dot on its i, #4940); new type takes the document's language; saved as the tag only when set, carried by character styles (#4946). English, eleven Indian languages, Bulgarian, Turkish and Russian hyphenate by run language, and German, Polish, Portuguese and Italian do in builds that embed their patterns; a word outside its language's script stays whole; Sanskrit automatic hyphenation awaits allowlisted patterns (#4947). Not yet: `.ai`/PDF import of a text's language, paragraph styles. Evidence: `features::tests::language_picks_the_fonts_forms`, `features::tests::serbian_gets_the_fonts_serbian_forms`, `typecmd::area_tests::language_is_a_character_attribute_saved_only_when_set`, `tests::typo::indic_language_runs_hyphenate_with_both_composers`, `hyphen::tests::sanskrit_without_allowlisted_patterns_uses_only_exceptions`, `hyphen::tests::rule_languages_break_by_their_own_rules`, `hyphen::tests::pattern_languages_break_at_their_own_patterns`, `tests::typo::a_russian_run_hyphenates_at_russian_break_points`, `tests::docsetup::the_further_indian_languages_are_document_and_text_languages`; spelling is checked in each run's Language (`text.spelling.check`, #4936) |
| No Break | done | Character panel menu (`text.setFormat` / `text.setRangeStyle {noBreak}`): the marked characters stay on one line, including across a space; a run that does not fit after earlier text moves together, and a run longer than the line stays together. Evidence: `layout::wrapping_tests::no_break_keeps_marked_characters_on_one_line`, `tests::no_break_keeps_marked_words_on_one_line`, `typecmd::no_break_is_a_character_attribute_saved_only_when_on` |
| Inline symbols in text | beyond Illustrator | not scored |
| Align Stroke (inside, outside) on live type's character stroke | beyond Illustrator | not scored; `stroke.set {align}` and `text.setRangeStyle {strokeOptions: {align}}`; saved natively, drawn around the glyphs on the canvas and in PDF, EPS and SVG (live text, stroke on the glyph outlines); visual bounds grow with it (#2294) |
+22 -11
View File
@@ -1,6 +1,6 @@
# UI and interaction parity
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-11-16 · **Change:** minor (Recolor Artwork follow-up (#8031, remaining #4028): native Lab input, picker swatch libraries and Assign-row menus; UI interaction regression coverage; scores and estimates unchanged; previously: #8005: the Color spectrum fills a resized panel; scores and estimates unchanged; previously: Pencil continuation, straight-line and closing cursors; scores and estimates unchanged; previously: Graphic Styles list fills a taller panel, #2992; scores and estimates unchanged; previously: library panels' lists fill a taller panel, #2992; scores and estimates unchanged; previously: Swatches list fills a taller panel, #1638; scores and estimates unchanged; previously: icon-strip flyouts also resize from the top edge and the canvas-side top corner, keeping the moved top in workspaces (storytold/craft-libs#1094); scores and estimates unchanged; previously: macOS: the canvas cursor stays after the pointer moves, #6362; scores and estimates unchanged; previously minor: Remove Background in the Contextual Task Bar, Properties › Quick Actions and the Control bar; previously minor: Ruler origin: the corner drag snaps as a drawn point does; previously minor: Live Paint Bucket fills faces crossed in one drag (#6373); previously: #6404: transform-aware Eyedropper character copying; scores and estimates unchanged; previously: Outline view: images and gradient meshes are picked on what Outline draws, so a click inside them reaches the path behind, #6437; previously minor: a middle-click on a document tab closes it, #6506; previously minor: Blob Brush: a round tip's preview is the outline of the area it adds, round at both ends, as the stroke it commits (#4343); scores and estimates unchanged; previously:; ruler double-click adds a guide at the pointer, #5239; G5: Inventory Icons built-in symbol library (four built-ins); previously minor: files that record no units open in Preferences › Units › General, #5820; previously minor: interim macOS cursor delivery, #2292; native validation pending; scores and estimates unchanged; Control bar › Snapping includes the existing Snap to Glyph and Alignment Guides toggles (#6164); scores and estimates unchanged; floating tab groups collapse into the side icon rail and opened rail panels fold back into it, #5925 in part; numeric fields step on wheel hover without taking keyboard focus, #5949; Character Styles panel: a double-click on a style's row opens its Character Style Options; the dialog keeps a fixed width and scrolls its sections, so its buttons stay on screen; Selection QoL: marquee modes and visible feedback, #5313; #3380 deletion-only review follow-up: independent survivors keep gradient placement, owned subpaths avoid discarded copies, and contracts/status/evidence are clarified; endpoint highlighting remains open; scores and estimates unchanged; Drop Shadow and glow dialogs: spinner arrows, #5367, #5368; Stroke Weight Up and Down shortcuts, #5797; Layers: Rename (`ui.rename`) opens the name field of the selected layer, group or object, #5324; Properties in Edit Artboards: Transform section above the Artboards section, #5219; scrubby labels: the Control bar's Stroke: and Opacity: links and the Properties panel's Stroke link scrub their fields, #4088; Properties: Quick Actions has Repeat Options for one selected repeat, #5181; Direct Selection: Shift-click picks several blend spine points, which drag together, #5285; Direct Selection: Cmd/Ctrl held lends the Selection tool and shows its bounding box, #3901; Join tool trims two crossing open paths and joins them at the crossing, #5844; Control bar: Paragraph: link and Align left/center/right while type is selected, #5372; shape tools: a press on the selection's centre point moves it and one in the rotate zone outside a box corner turns it, #5477; scores and estimates unchanged) · **Target:** Adobe Illustrator 2026 (30.x; Units › East Asian Type acts, with Q and Ha units; scores unchanged)
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-11-16 · **Change:** minor (Layers panel: Alt over the list shows the copy cursor while rows or the selected-art square are dragged, #8217; scores and estimates unchanged; previously: Gradient panel: the add-stop strip under the ramp shows the white arrow with a plus on Windows and X11, #8241; scores and estimates unchanged; previously: Recolor Artwork follow-up (#8031, remaining #4028): native Lab input, picker swatch libraries and Assign-row menus; UI interaction regression coverage; scores and estimates unchanged; previously: #8005: the Color spectrum fills a resized panel; scores and estimates unchanged; previously: Pencil continuation, straight-line and closing cursors; scores and estimates unchanged; previously: Graphic Styles list fills a taller panel, #2992; scores and estimates unchanged; previously: library panels' lists fill a taller panel, #2992; scores and estimates unchanged; previously: Swatches list fills a taller panel, #1638; scores and estimates unchanged; previously: icon-strip flyouts also resize from the top edge and the canvas-side top corner, keeping the moved top in workspaces (storytold/craft-libs#1094); scores and estimates unchanged; previously: macOS: the canvas cursor stays after the pointer moves, #6362; scores and estimates unchanged; previously minor: Remove Background in the Contextual Task Bar, Properties › Quick Actions and the Control bar; previously minor: Ruler origin: the corner drag snaps as a drawn point does; previously minor: Live Paint Bucket fills faces crossed in one drag (#6373); previously: #6404: transform-aware Eyedropper character copying; scores and estimates unchanged; previously: Outline view: images and gradient meshes are picked on what Outline draws, so a click inside them reaches the path behind, #6437; previously minor: a middle-click on a document tab closes it, #6506; previously minor: Blob Brush: a round tip's preview is the outline of the area it adds, round at both ends, as the stroke it commits (#4343); scores and estimates unchanged; previously:; ruler double-click adds a guide at the pointer, #5239; G5: Inventory Icons built-in symbol library (four built-ins); previously minor: files that record no units open in Preferences › Units › General, #5820; previously minor: interim macOS cursor delivery, #2292; native validation pending; scores and estimates unchanged; Control bar › Snapping includes the existing Snap to Glyph and Alignment Guides toggles (#6164); scores and estimates unchanged; floating tab groups collapse into the side icon rail and opened rail panels fold back into it, #5925 in part; numeric fields step on wheel hover without taking keyboard focus, #5949; Character Styles panel: a double-click on a style's row opens its Character Style Options; the dialog keeps a fixed width and scrolls its sections, so its buttons stay on screen; Selection QoL: marquee modes and visible feedback, #5313; #3380 deletion-only review follow-up: independent survivors keep gradient placement, owned subpaths avoid discarded copies, and contracts/status/evidence are clarified; endpoint highlighting remains open; scores and estimates unchanged; Drop Shadow and glow dialogs: spinner arrows, #5367, #5368; Stroke Weight Up and Down shortcuts, #5797; Layers: Rename (`ui.rename`) opens the name field of the selected layer, group or object, #5324; Properties in Edit Artboards: Transform section above the Artboards section, #5219; scrubby labels: the Control bar's Stroke: and Opacity: links and the Properties panel's Stroke link scrub their fields, #4088; Properties: Quick Actions has Repeat Options for one selected repeat, #5181; Direct Selection: Shift-click picks several blend spine points, which drag together, #5285; Direct Selection: Cmd/Ctrl held lends the Selection tool and shows its bounding box, #3901; Join tool trims two crossing open paths and joins them at the crossing, #5844; Control bar: Paragraph: link and Align left/center/right while type is selected, #5372; shape tools: a press on the selection's centre point moves it and one in the rotate zone outside a box corner turns it, #5477; scores and estimates unchanged) · **Target:** Adobe Illustrator 2026 (30.x; Units › East Asian Type acts, with Q and Ha units; scores unchanged)
>
> Tech Circuit update (2026-11-14): three original procedural brushes; ten built-in brush libraries (G5).
>
@@ -31,8 +31,10 @@ Window → Help Bar toggles the bottom tool-help strip independently of the stat
**Feature evidence last updated:** 2026-11-03.
Enclosing Lasso is an add-on under Object › Plug-ins with its own heading in All Tools. It has
no default shortcut or Basic toolbar slot. It selects whole objects only
Enclosing Lasso is an add-on under Object › Plug-ins. Its tool is also in the Lasso tool's group
in both shipped toolbars, after the Lasso, and All Tools lists it there, under Select. A toolbar
edited before it joined keeps its saved layout until Reset Toolbar. It has no default shortcut;
one can be set in Edit › Keyboard Shortcuts › Tools. It selects whole objects only
when their geometry is fully enclosed by the freehand loop. Shift adds, Alt subtracts, and
Escape cancels. Ordinary group members can be selected separately; compound paths stay whole.
Path checks follow curves, excluding stroke width and effects; other objects use their geometric
@@ -56,6 +58,8 @@ Artboard Options forwards the active Artboard tool's Scale Artwork with Artboard
| 2026-11-09 | minor | Document Setup and Character panel Language lists: Nepali, Konkani and Sindhi complete #4943; Assamese and Sanskrit are already present from #5946. Names in all 27 catalogs come from [CLDR locale language-name data](https://github.com/unicode-org/cldr/tree/main/common/main). The public [language assignment documentation](https://helpx.adobe.com/illustrator/using/spelling-language-dictionaries.html) describes the Character panel Language menu, but does not establish that these five languages are listed there; inclusion and a single Sindhi entry remain maintainer decisions. Scores unchanged |
| 2026-11-14 | minor | G5: Tech Circuit adds three original procedural brushes (Circuit Trace, Bus Lines, Terminal Nodes); ten built-in brush libraries. G5 remaining estimate 3–13 h (estimated); parity scores and headline totals unchanged. |
| 2026-11-14 | minor | Layers panel: right-clicking a layer/group/object row shows a context menu with Options…, Duplicate, Delete, Lock/Hide Others, Locate Object, and Collect for Export — matching standard desktop layer panel conventions. Scores unchanged. |
| 2026-11-16 | minor | Layers panel: rows or the selected-art square dragged over the list show the copy cursor while Alt is held, as the drop then copies, and the grabbing hand otherwise (#8217). Scores and estimates unchanged. |
| 2026-11-16 | minor | Gradient panel: the strip under the ramp, where a click adds a stop, shows the white arrow with a plus on Windows and X11, where the system copy cursor showed as the plain arrow (#8241). Scores and estimates unchanged. |
| 2026-11-13 | minor | Pencil cursors: the continuation cursor (a short rising line) shows over an open end of a selected path before any press, freehand too, and while a continuing stroke nears another selected path's open end it connects to; the straight-line cursor is a short level line; a continued path, a straight line too, shows the closing cursor and closes within Close Paths When Ends Are Within of its other end, and with Alt at the release. Scores and estimates unchanged. |
| 2026-11-15 | minor | G12: Swatches item menus validated in all five views: 39 focused tests passed, regression fails without the menu hooks, rendered list/thumbnail layouts inspected, and fresh local deep CodeRabbit review found zero issues. Full workspace CI passed on Linux/WSL on the merged branch (all 13 gates), including the test-helper correction for the upstream compile error tracked in #7727; native Windows full CI has two unchanged engine-test failures. Scores and estimates unchanged. |
| 2026-11-13 | minor | Graphic Styles: in a panel made taller the list fills the space above the footer instead of stopping at 220 pt (#2992; `the_list_fills_a_tall_panel_above_its_footer` in `crates/ui-egui/src/panels/graphic_styles.rs`). Scores and estimates unchanged. |
@@ -163,6 +167,7 @@ tools, never checked side by side) isn't captured row by row.
| Cmd/Ctrl lends the last-used selection tool | done | the path being drawn continues afterwards; with Direct Selection (the default until a selection tool is chosen) a Cmd drag moves an anchor of the path being drawn, moves a straight segment or bends a curved one, one undo step each, and a Cmd-click away from art ends the path; with Selection the hidden bounding box of the path being drawn takes no press, so the drag moves the path (#4980); anchors or segments the lent Direct Selection picks are what Copy and Cut take, as with Direct Selection chosen, while Copy with the Pen's own last anchor selected takes the whole path (#6123) |
| Click an open path's end to continue it; click another path's end to join | done | #776 |
| Rubber Band preview | done | Preferences option |
| P while the Pen draws a path ends the path, as Escape does | done | the [help page](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/preview-paths-drawn.html) describes P with the preview off; VectorCraft's own rules: it does the same with Rubber Band on, a click on the active Pen's button and `tool.select` do the same, and the Pen stays chosen |
| Auto Add/Delete on a selected path; Shift or the preference disables it | done | |
| Pen cursors (new path ×, continue /, close o, add +, delete −, convert ^) | done | the nib is a fountain-pen nib, tip on the hotspot, with the slit widening into the breather hole and the heel clipped square to its axis; bitmap tests at 1× and 2× pin the nib and the new-path asterisk, and in-app screenshots compare the Pen with Direct Selection |
| Node-editing cursors: Direct Selection's white arrow with a hollow or filled square over an anchor (path unselected or selected); the Reshape Segment cursor over a curved segment (Direct Selection, Anchor Point, the Pen with Alt); the Anchor Point caret for the Pen with Alt; Group Selection's plus (also Direct Selection with Alt); a filled arrow while dragging that turns hollow on a snap; a double arrowhead for an Alt-drag copy | partial | as the public manual describes them, drawn in code; no cue over handles (none documented) |
@@ -170,6 +175,7 @@ tools, never checked side by side) isn't captured row by row.
| Free Transform's Cmd/Ctrl side-shear cursor | done | two arrows passing along the side (ShearH, ShearV), instead of the resize arrow across it |
| Live Paint Bucket cursors | partial | a filled bucket over a face a click fills, a brush over an edge it paints, an empty bucket where it paints nothing, following Paint Fills, Paint Strokes and Shift; the Eyedropper with Alt; the crosshair with Use Precise Cursors. No cursor swatch preview |
| Cursors of their own for Lasso, Magic Wand, the freehand tools, Shaper, Measure, Print Tiling, the symbolism tools, vertical type, Scissors (over a segment and away), Mesh and Puppet Warp | partial | each tool returns its own cursor and Use Precise Cursors turns them into the crosshair; until they're drawn they borrow the crosshair, the I-beam, the Pen's add cursor or not-allowed |
| Knife cursor | done | a knife, the blade's point on the hotspot, white blade and black handle, for the Knife and the Trim at Crossings Tool; the crosshair with Use Precise Cursors; `the_knife_shows_a_knife_with_its_point_on_the_hotspot`, `drawing_tools_show_their_own_cursor` |
| Blob Brush and Eraser: the tip's outline at the pointer | done | before a press and while painting, the outline of the tip (its size, angle and roundness, at the zoom) follows the pointer, black on a white halo, round a small centre dot; `[` / `]` and Tool Options change it at once; precise cursors (Caps Lock) show only the crosshair; it goes when the pointer leaves the canvas, while Cmd/Ctrl lends a selection tool and while Alt lends the Blob Brush the Smooth tool (#4977); `crates/tools/src/draw2/gesture.rs` and its tests While the button is down a round Blob Brush shows the outline of the area it will add, rounded at both ends, not a line as wide as the brush that ends square (#4343). |
| Eraser: an Alt-drag draws a marquee and the release erases everything inside it (closed shapes lose the rectangle's area, open paths are cut where they cross its edges); Alt+Shift keeps the marquee square; Escape cancels it, and a click erases nothing | done | `path.eraseRegion {rect}`; [public behavior reference](https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf#page=133); `eraser_alt_drag_draws_a_marquee_and_erases_the_rectangle`, `eraser_alt_shift_drag_keeps_the_marquee_square`, `eraser_marquee_click_or_escape_erases_nothing`, `erase_region_rect_erases_everything_inside_it`, `erase_region_rect_refuses_bad_values` |
| Busy cursor during long operations | done | Background open, save and export show the system progress cursor (gap G1) |
@@ -182,8 +188,10 @@ tools, never checked side by side) isn't captured row by row.
| Swatches list fills a taller panel (#1638) | done | Docked, floating or in a resized flyout, the swatch list takes the height above the panel's footer, as the Artboards list does; outside a sized panel it stays 150 pt (200 pt for large thumbnails); `the_list_fills_a_tall_panel_above_its_footer` in `panels/swatches/tests.rs` |
| Layers panel lists a blend's spine (#4820) | done | an open blend shows a `<Path>` row below its key objects, where Release leaves the spine; a click selects the blend (Shift/Cmd toggles it) so Direct Selection edits the spine; a locked blend's row selects nothing; no row while searching or filtering (`a_blends_spine_is_a_row_below_its_keys_that_selects_the_blend`) |
| Layers panel: a layer whose Layer Options › Print is off shows its name italic (#5739) | done | the panel row and its drag ghost; a printing layer stays upright, and Print on again restores it; `panels::layers` test `a_layer_that_does_not_print_has_its_name_italic` |
| Layers panel: Alt-drag shows the copy cursor (#8217) | done | rows and the selected-art square dragged over the list show the copy cursor while Alt is held and the grabbing hand otherwise, following Alt mid-drag; on Windows and X11 the copy cursor is the white arrow with a plus (the panels' add cursor, #8241); over the trash and New Layer, which ignore Alt, the hand stays; guide rows keep theirs; `alt_shows_the_copy_cursor_while_rows_are_dragged`, `drag_cursor_shows_a_copy_only_where_the_drop_copies` |
| Gradient panel: add-stop cursor under the ramp (#8241) | done | the white arrow with a plus (the Group Selection glyph) over the strip under the ramp, handed to the OS on Windows and X11 (winit shows the plain arrow for the system copy cursor there), the system copy cursor elsewhere; over the ramp itself the arrow stays; `panels::gradient` test `the_strip_under_the_ramp_shows_the_add_cursor` |
| Blend spine Anchor Point conversion and handle editing (#2544) | implemented | symmetric handles, independent drag/retraction, visible-handle policy and selection/stacking covered by tool and engine regressions; Windows native canvas checks and screenshots reviewed in PR #2643 |
| Several blend spine points picked and dragged together (#5285) | done | with Direct Selection, Shift-click picks more points of a selected blend's spine or takes one away, as on a path; dragging any picked point moves them all, and the key objects on them, in one undo step (`object.blend.spine.moveAnchor {with}`); a marquee doesn't pick spine points yet |
| Several blend spine points picked and dragged together (#5285) | done | with Direct Selection, Shift-click picks more points of a selected blend's spine or takes one away, as on a path; dragging any picked point moves them all, and the key objects on them, in one undo step (`object.blend.spine.moveAnchor {with}`); a marquee picks the spine points inside it on the topmost selected blend, and with Shift adds or takes them away |
| Add/Delete/Anchor Point tools; Anchor Point tool drags segments to reshape | done | #2267: a click on a handle end retracts that handle and leaves the anchor a corner with the other one; Shift held at the press on an anchor moves it, handles and all (Shift kept down: at 45° steps) instead of pulling out handles |
| Pencil: Fidelity, Keep selected, Alt to Smooth, edit selected paths, close by proximity | done | Fidelity is in screen pixels, the same at any zoom, and goes down to 0.01 px in the dialog and the tool, which sends `path.freehand` the value in points at the current zoom (#5729; the Smooth tool keeps 0.05 pt); its slider runs across the Tool Options row on a logarithmic rail from 0.01 to 20 px, the field shows hundredths, and the slider's and the field's arrow keys step hundredths up to 0.1 px, tenths up to 1 px and whole pixels above (Shift ×10) (#3328); Alt key toggles to Smooth Tool (#2001); Shift held at the press draws a straight line at 45° steps from the Constrain Angle, and Alt held at the press (with Alt key toggles to Smooth Tool off) a straight line at any angle (#3799), with a straight-line cursor (a short level line) while Shift or Alt is held before the press, and a path-continuation cursor (a short rising line) over an end of a selected open path, where the stroke continues the path, freehand or straight, and while a continuing stroke ends near an open end of another selected path it connects to; Edit Selected Paths continues a selected path from an end and, from a stroke that starts and ends on a selected path, redraws the section between (the shorter way round a closed path, #2850); with Keep selected (Pencil and Paintbrush, on by default) on, a stroke selects the path it draws or continues and replaces the earlier selection, and off a new stroke leaves nothing selected, the earlier selection included, while a continued or redrawn path is deselected and the rest of the selection stays; a filled Pencil path keeps a stroke of None (#1804, part of #1679); while a freehand stroke is drawn back to within Close Paths When Ends Are Within of its start, or a stroke continuing a selected path (a straight line too) to within it of that path's other end, the Pencil and the Paintbrush show the closing cursor, and a release there closes the path; a Pencil stroke from an end of one selected open path to an end of another connects the two into one path |
| Drop Shadow, Outer Glow and Inner Glow: Opacity, the offsets, Blur and Darkness have spinner arrows that step by one (a unit for distances), repeat when held and stop at the fields' ends (#5367, #5368) | done | dialogs::effect test drop_shadow_and_outer_glow_fields_have_spinner_arrows; other effect dialogs' number fields still have none |
@@ -232,7 +240,7 @@ tools, never checked side by side) isn't captured row by row.
| Live Corners widgets (radius readout, Alt-click cycles kind, double-click the Corners dialog) | done | a Direct Selection click on a widget selects its corner (#1239), and with every corner selected a Shift-click on a widget picks that corner alone instead of deselecting it (#5188); a press-and-drag on a widget of a path selected whole still rounds every corner (#908), and adding widgets to the selection by Shift-click (#1232) is missing; the bounding box hides while a widget is dragged with the Selection tool (#1229); a round corner next to a curved side curves smoothly instead of sticking out of the shape (#1512); a corner rounds until its cut reaches its neighbours' cuts, so one corner of a square alone reaches the whole side (#2332) |
| Corners between curved sides (#1144), Relative rounding | done | #1144 closed; Relative rounding in the Corners dialog (Relative / Absolute, radius as a percentage of each corner's maximum, kept as the shape is resized; `object.setLiveShape` `relativeRadii`, #3091, `tests_livecorners::relative_corner_rounding_keeps_fraction_on_resize`) |
| Pie widgets on a live ellipse: drag one to set Pie Start or End Angle, double-click one to make the ellipse whole | done | Selection tool, with the bounding box showing |
| A shape just drawn shows its bounding box and Live Shape widgets with the shape tool still active, and the selection can be moved and turned without switching tools | done | #5477: Rectangle, Rounded Rectangle, Ellipse, Polygon and Star keep the selection's bounding box, corner widgets and pie widgets on show while they draw nothing; a drag on a corner or pie widget adjusts it (arrows step the corner kind, Escape cancels), a press on the selection's centre point (Attributes › Show Center) moves the selection — the Selection tool's move arrow, snapping and Alt copy — a press just outside a corner of the box turns it about the centre (the Selection tool's rotate zone and cursor), and a press anywhere else draws (so a second shape drawn from the first one's centre moves the first: press elsewhere or deselect first). Public descriptions: [Live Shapes](https://helpx.adobe.com/illustrator/using/live-shapes.html) (live shapes adjust without switching tools) and [CreativePro, Working with Live Shapes](https://creativepro.com/?p=23921) (a widget shows in every corner on release; drag one toward the centre to round). The bounding-box handles show but scale only with the Selection tool, so a press on a corner still starts a new shape there; double-clicking a widget opens nothing with a shape tool. Tests `a_shape_tool_drags_the_selected_shapes_widgets` and `a_shape_tool_moves_the_selection_by_its_centre_point_and_turns_it_from_a_corner` |
| A shape just drawn shows its bounding box and Live Shape widgets with the shape tool still active, and the selection can be moved and turned without switching tools | done | #5477: Rectangle, Rounded Rectangle, Ellipse, Polygon and Star keep the selection's bounding box, corner widgets and pie widgets on show while they draw nothing; a drag on a corner or pie widget adjusts it (arrows step the corner kind, Escape cancels), a press on the selection's centre point (Attributes › Show Center) moves the selection — the Selection tool's move arrow, snapping and Alt copy — a press just outside a corner of the box turns it about the centre (the Selection tool's rotate zone and cursor), and a press anywhere else draws (so a second shape drawn from the first one's centre moves the first: press elsewhere or deselect first). Public descriptions: [Live Shapes](https://helpx.adobe.com/illustrator/using/live-shapes.html) (live shapes adjust without switching tools) and [CreativePro, Working with Live Shapes](https://creativepro.com/?p=23921) (a widget shows in every corner on release; drag one toward the centre to round). A drag on one of the box's handles scales the selection as the Selection tool's handles do. A double-click on a corner widget of a selected live rectangle or polygon shows and selects the Transform panel where it is (closed, docked, floating or in an icon column; a second double-click keeps it on show), and leaves the tool, the selection and the document as they were; a double-click on a pie widget, off the widgets, with Show Corner Widget off or with Line Segment does nothing, and the Selection tool's double-click on a corner widget still opens the Corners dialog. Public description: [Live shape properties](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/modify-live-shapes/live-shape-properties.html) (a double-click on a corner widget of a selected live shape opens the Transform panel). Tests `a_shape_tool_drags_the_selected_shapes_widgets`, `a_shape_tool_moves_the_selection_by_its_centre_point_and_turns_it_from_a_corner`, `a_shape_tool_scales_the_selection_by_its_bounding_box_handles`, `a_double_click_on_a_corner_widget_shows_the_transform_panel`, `a_double_click_on_a_corner_widget_with_a_shape_tool_asks_for_the_transform_panel` (engine), `a_corner_widget_double_click_with_a_shape_tool_requests_the_transform_panel` (MCP: the `pointer_gesture` reply's `requests` carry `{"panel": "transform"}`) and `a_tools_panel_request_shows_the_panel_and_a_second_keeps_it_shown` (UI) |
| Isolation mode by double-click (groups and single objects), breadcrumbs, Esc to exit | done | Single paths, compound paths, images, meshes and placed files isolate too ([helpx: Isolate objects](https://helpx.adobe.com/africa/illustrator/desktop/manage-objects/select-objects/isolate-objects.html)); locking or hiding the layer (or a group) around the isolated object afterwards keeps clicks and marquees off it, as outside isolation mode (#5309) |
| "Magnetic" moves of selected anchors with a modifier (#955 request) | missing | not a feature of the reference app as documented; under discussion |
| Coinciding anchors of overlapping objects: the selected object's anchor is taken, also under another object | done | #1508 |
@@ -323,6 +331,7 @@ tools, never checked side by side) isn't captured row by row.
| Cmd/Ctrl: last-used selection tool; Cmd+Alt: Group Selection inside Direct Selection | done | Cmd+Alt lends Group Selection only while Direct Selection is active (Cmd borrow from the Pen keeps Direct Selection so Alt stays copy/subtract); Cmd alone lends Direct Selection the Selection tool: its bounding box shows while Cmd is held over objects selected whole and its handles scale and rotate them, and a Cmd drag moves the whole object while its direct-selected anchors stay selected (#3901; no box over a selection with anchors picked yet); engine pointer and canvas regressions |
| Eyedropper copies effective character dimensions between transformed text objects | done | Point/area and grouped text, highlighted ranges, reverse/remembered sampling, opt-outs and atomic invalid-transform rejection; `scaled_type_pick_*` (#6404) |
| Eyedropper styles highlighted characters only and preserves ranges across Type switches | done | Font/paint, Shift color-only, Unicode, Undo/Redo and stale-range regression tests; enabled non-neutral source or target object transparency is refused atomically; disable Transparency to sample supported attributes |
| Gradient mesh: a solid color dropped from the Color or Swatches panel or a Fill proxy on a selected mesh recolors the mesh point under the pointer, else the patch's four points; with the mesh selected, an Eyedropper click applies the fill color the same way | done | [Edit mesh objects](https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf#page=312); `object.mesh.setPointColor`, one undo step, none when the color is unchanged. The 5-pixel reach for a point is VectorCraft's own. Tests `a_color_dropped_on_a_selected_mesh_recolors_the_point_or_patch_under_it`, `a_click_on_a_selected_mesh_gives_its_point_or_patch_the_fill_color`, `a_click_on_an_object_over_a_selected_mesh_copies_that_object` |
| Eyedropper reads visible sources while their layer/object is locked or outside isolation | done | Ordinary/Shift/Shift+Alt and gradient-stop reads preserve the source and selection; Alt reverse remains editable-only; hidden art stays excluded (`eyedropper_sources.rs`, #1251) |
| Add a visible stroke after drawing with inherited None/zero-width paint | done | Paint and Swap Fill/Stroke restore the existing 1 pt default; positive widths and painted zero widths stay as set; Undo/Redo and targeted appearance items tested (`stroke_visibility.rs`, #1253) |
| Double-click a stroked segment to create a width point in Width Point Edit | done | Finite-arithmetic follow-up: engine regressions and full CI passed; [Validation evidence](target-app-parity.md#evidence-what-ships-today-by-area). Command and pointer regressions cover opening, sampled widths, adjoining adjustment on/off through checkbox/OK, compound paths, Cancel/Delete and Undo/Redo; dialog layout reviewed. [Validation evidence](target-app-parity.md#evidence-what-ships-today-by-area) |
@@ -332,7 +341,7 @@ tools, never checked side by side) isn't captured row by row.
| Document Setup → Edit Artboards applies valid settings, closes the dialog and activates the Artboard tool | done | Pointer-click tests cover successful handoff, invalid settings, OK, Cancel and Undo in `dialogs/document_setup.rs`. |
| Escape leaves Artboard editing for Selection; during a drag it first cancels the gesture | done | Headless egui key events cover idle Escape, active-drag cancellation and a subsequent Escape in `tests/distortkeys.rs`. |
| Escape while typing ends the edit, keeps the type selected and switches back to the tool whose double-click on type chose the Type tool (kept until another tool is chosen or another document or window becomes active, so later edits with the Type tool return there too), or to the Selection tool when there is no such tool, as when the Type tool was chosen from the toolbar or after such a switch | done | #1802 (#1686, #1656) |
| Selection tool: selected area type and type on a path show an in port and an out port (empty, an arrow where threaded, the red "+" of overflow); a click on either loads the text cursor; a click on a closed path, on empty canvas or a drag threads the text there, after the clicked frame from its out port, before it from its in port; Escape or another tool drops it; a double-click on a threaded port breaks the thread there | partial | #2572 (`text.thread.add`, `before` for the in port); the out port sits on the frame's right side above the bottom-right corner handle and the in port on its left side below the top-left one, so the handles can still be grabbed; a double-click on a threaded port breaks the thread (`text.thread.break`, [archived help](https://web.archive.org/web/20220127090642/https://helpx.adobe.com/illustrator/using/creating-text.html)); the loaded cursor borrows the I-beam |
| Selection tool: selected area type and type on a path show an in port and an out port (empty, an arrow where threaded, the red "+" of overflow); a click on either loads the text cursor; a click on a closed path, on empty canvas or a drag threads the text there, after the clicked frame from its out port, before it from its in port; Escape or another tool drops it; a double-click on a threaded port breaks the thread there | partial | #2572 (`text.thread.add`, `before` for the in port); the out port sits on the frame's right side above the bottom-right corner handle and the in port on its left side below the top-left one, so the handles can still be grabbed; a double-click on a threaded port breaks the thread (`text.thread.break`, [archived help](https://web.archive.org/web/20220127090642/https://helpx.adobe.com/illustrator/using/creating-text.html)); the loaded text has a cursor of its own, with a link badge over a closed path, area type or type on a path that a click threads it into |
| Shift-click selects several artboards (Artboard tool, Artboards panel); they move, Alt-copy and delete together | done | `artboard.move`/`artboard.delete` `indices` (#1139); in the panel, Shift- and Ctrl/Cmd-click work with any tool by switching to the Artboard tool (#5698); panel menu, trash and Properties share selected-set deletion; all-selected retains artboard 1 and a single board cannot be deleted, with pointer-event and Undo/Redo coverage |
| Artboards panel: drag a row above or below another to reorder the artboards (as Move Up / Move Down do) | done | #4687; a line shows where the row lands, `artboard.reorder` in one undo step, the moved artboard becomes active; public forum answers describe the drag |
| Artboards panel › Delete Empty Artboards | done | `artboard.deleteEmpty`; one undo step, guides go too, locked artboards stay, and artboard 1 when every artboard is empty and none is locked; an artboard is empty when no object (hidden, locked and template art included; guides not) has visual bounds that meet or touch it, a group counting by its members and a clip group or clipping layer by its members inside the clip (our reading of "no artwork"; the pages give no finer rule); [spec](https://helpx.adobe.com/illustrator/desktop/create-manage-artboards/add-edit-artboards/delete-artboards.html) |
@@ -419,7 +428,8 @@ next unit in the order a right-click on a ruler lists them, from Feet back to Po
| Live trace result bounds and selection highlights exclude the retained bitmap; source-image views retain it | done | All TraceView modes and rotated result bounds regression-covered; ordinary hidden group behavior retained |
| Image Trace panel: the Preview checkbox before Trace chooses whether a setting change traces the selected Image Trace object again at once | done | Per the public documentation, Preview shows the result of the current settings and Trace traces with them (<https://web.archive.org/web/20250831090623/https://helpx.adobe.com/illustrator/using/image-trace.html>). Preview is on by default and kept with the UI preferences; Reset to Default leaves it. Off, changes wait in the panel until Trace applies them as one undo step, or until Preview is turned on again. Changes stay with the object they were made for while another object is selected, and come back when it is selected again. `imageTrace.preview {on?}`, `ui.set {imageTracePreview}`; `panels/image_trace.rs` headless tests (`with_preview_off_a_slider_change_waits_for_trace`, `turning_preview_on_traces_the_changes_that_waited`, `preview_turned_on_with_nothing_selected_traces_when_the_object_is_selected_again`, `settings_that_wait_stay_with_their_object`, `settings_that_wait_come_back_when_their_object_is_selected_again`, `settings_that_wait_are_dropped_when_their_object_changed_since`, `preview_is_kept_with_the_preferences_and_reset_to_default_leaves_it`) |
| Toolbar without group labels by default, one or two columns; All Tools drawer by flyout group with shortcuts, its menu (Reset, Basic, Advanced) and Show section | done | #1751; a preference brings the labels back; `toolbar.show` sets the Fill/Stroke, Coloring, Draw Mode and Screen Mode controls |
| Actions panel: ≡ › Save Actions… saves the current set with all its actions to a file and ≡ › Load Actions… adds a saved set ([Manage a set of actions](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/manage-a-set-of-actions.html)) | partial | `ui.actionSet.save`, `ui.actionSet.load`; `panels/actions.rs` tests. The file is VectorCraft's own `.vcactions` JSON; Clear and Replace Actions remain |
| Actions panel: ≡ › Save Actions… saves the current set with all its actions to a file and ≡ › Load Actions… adds a saved set ([Manage a set of actions](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/manage-a-set-of-actions.html)) | partial | `ui.actionSet.save`, `ui.actionSet.load`; `panels/actions.rs` tests. The file is VectorCraft's own `.vcactions` JSON; Clear Actions remains |
| Actions panel: ≡ › Replace Actions… puts the set of a saved file in place of every set in the panel ([the help page](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/actions-panel-overview.html)) | done | `ui.actionSet.replace`; `panels/actions.rs` tests. The file is read as Load Actions… reads it; the item asks no question first |
| Actions panel: ≡ › Reset Actions asks first; OK replaces the sets in the panel with the default set and Append adds the default set after them ([the help page](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/manage-a-set-of-actions.html)) | done | `ui.actionSet.reset`; `panels/actions.rs` and `dialogs/tests.rs` tests. The default set is VectorCraft's own Default Actions set |
| Actions panel: ≡ › Load Actions… also reads action sets saved as `.aia` files ([Actions panel overview](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/actions-panel-overview.html)) | partial | `actionSet.read`, `ui.actionSet.load`; `tests/actionset.rs`, `panels/actions.rs` tests, `import_fuzz`. Steps with a label and no recorded values come in as menu commands that run with no values and open no dialog, matched by label, and Set Selection steps come in as Select Object steps; the other steps, recorded menu items included, are left out and counted |
| Actions panel: ≡ › Action Options… renames the selected action and sets its function key and color ([Actions panel overview](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/actions-panel-overview.html)) | partial | `ui.action.options`; `panels/actions.rs` tests (part of #1629). Button Mode shows the color |
@@ -442,6 +452,7 @@ next unit in the order a right-click on a ruler lists them, from Feet back to Po
| Make Compound Path on a group (such as outlined type) keeps its backmost path's paint; compound paths joined into one keep their holes | done | #1537 |
| Symbol libraries: Window › Symbol Libraries (Basic Shapes, UI Frames, Map Markers, Inventory Icons, Skill Icons, User Defined, Other Library…, Save Symbols…) and the Symbols panel's Symbol Libraries Menu button and its menu's Open Symbol Library / Save Symbol Library…; a click on a library symbol adds it to the document's Symbols (one undo step, it becomes the current symbol), Shift/Cmd-clicks select for Add to Symbols, and a symbol dragged onto the canvas is added and placed where it is dropped | done | [public source](https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/create-or-import-symbol-libraries.html), [Symbols panel options](https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/symbols-panel-options.html), [placing from a library](https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/create-and-place-symbols.html); `window.symbolLibrary`, `window.symbolLibrary.other`, `ui.saveSymbolLibrary` (dialog `saveSymbolLibrary`), `window.userSymbolLibrary1`…`10`; `panels::tests_symbol_libraries`; five built-in libraries (Basic Shapes, UI Frames with default 9-slice, Map Markers, Inventory Icons, Skill Icons; original, generated in code) |
| Brush libraries: Window › Brush Libraries (Art Ribbons, Ink and Wash, Calligraphic Nibs, Bristle Brushes, Pattern Borders, Scatter Shapes, Game Trails, Energy Beams, Dry Media, Tech Circuit, User Defined, Other Library…, Save Brushes…) and the Brushes panel's Brush Libraries Menu button and its menu's Open Brush Library / Save Brush Library…; a click on a library brush adds it to the document's Brushes (one undo step, it becomes the current brush, and selected paths take it in the same step), Shift/Cmd-clicks select for Add to Brushes, a brush dragged onto a path is added and applied to it and one dragged onto the Brushes panel is added; thumbnails render with the library's patterns and symbols | done | [public source](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/apply-and-edit-strokes/create-new-brush-libraries.html), [import brushes](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/apply-and-edit-strokes/import-brushes-from-brush-libraries-or-other-files.html), [Brushes panel overview](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/apply-and-edit-strokes/brushes-panel-overview.html); `window.brushLibrary`, `window.brushLibrary.other`, `ui.saveBrushLibrary` (dialog `saveBrushLibrary`), `window.userBrushLibrary1`…`10`; `panels::tests_brush_libraries`; ten built-in libraries (original, generated in code) |
| Brushes panel menu › Options of Selected Object…: changes the selected brushed paths' brush settings on those paths only, leaving the brush and its other strokes as they are; the brush type's options dialog opens without the Name row (and without an art brush's scale and direction options or a pattern brush's tiles), and OK sends only the values changed in it | done | [Modify brushes](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/apply-and-edit-strokes/modify-brushes.html), [Brushes panel overview](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/apply-and-edit-strokes/brushes-panel-overview.html); `brush.objectOptions`, `ui.brushObjectOptions`; which fields a path can set is VectorCraft's own choice (calligraphic, scatter, art and pattern brushes; not bristle); `options_of_selected_object_*` tests in `crates/engine/src/tests/brushsym.rs` and `crates/ui-egui/src/dialogs/brush_options/tests.rs`, brush tests in `crates/brush/src/tests.rs` |
| Symbols panel: New Symbol opens Symbol Options (Name) before making the symbol; Alt-click skips it | partial | #1560 (#1566); Registration 9-point grid in Symbol Options (`symbol.new` / `symbol.place`); Export Type (Graphic / Movie Clip) and Enable Guides for 9-Slice Scaling (scaled instances keep their corners; in symbol editing mode the guides are drawn over the art and the Selection tool drags them); Symbol Type (Dynamic Symbol / Static Symbol, new symbols dynamic; #4938); Align to Pixel Grid (`alignToPixelGrid` on `symbol.new` / `symbol.options`: the art snaps at the symbol's natural size and instances at that size stay on whole points; [Aligning symbols to pixel grid](https://web.archive.org/web/20220911143322/https://helpx.adobe.com/pdf/cs6/illustrator_reference.pdf#page=28)) |
| Dynamic symbols: an instance changes the fill, stroke, opacity and blend of objects in its symbol's art and stays linked; Reset in the Properties panel's Quick Actions and the Symbols panel menu (Reset Symbol Instance) | partial | #4938; `symbol.instance.setAppearance` (by child-index path) and `symbol.instance.reset`; redefining keeps the changes, Break Link bakes them; Direct Selection of a path, compound path or type object inside an instance, with the Fill/Stroke controls setting its solid fill or stroke, is on canvas; on-canvas editing beyond a solid fill and stroke, and `.ai` read and write, remain |
| Pathfinder Trim, Merge and Crop remove strokes; Merge joins same-fill objects whatever their strokes | done | #1570 (#1572) |
@@ -449,7 +460,7 @@ next unit in the order a right-click on a ruler lists them, from Feet back to Po
| Pathfinder Divide: an open cutting line splits a filled path | done | #1307; straight, crossed, bent and curved cutters, holes and frontmost appearance regression-tested; native automation: independent piece movement, one Undo/Redo, saved-document round trip and window capture; existing bounded-map fallback remains |
| Pathfinder panel › Pathfinder Options…: Precision, Remove Redundant Points, Divide and Outline Will Remove Unpainted Artwork | done | #3426; `object.pathfinder.options`, kept in the preferences; defaults (0.01 pt, both off) keep the earlier results; [spec](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/pathfinder-panel-overview.html) |
| Cmd/Ctrl+4 repeats the last successful Shape Mode or Pathfinder operation on the selection | done | Panel operations, direct `object.pathfinder.*` commands and `command.batch` steps (Actions playback) set history; `action.batch`, Trap, compound-shape edits and live effects do not. Repeat uses current Pathfinder Options; [key spec](https://web.archive.org/web/20260726060015/https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html), [menu spec](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/pathfinder-panel-overview.html) |
| Pathfinder panel: compound shapes (Make, Release and Expand Compound Shape in the panel menu, Alt-click a Shape Mode, a Shape Mode for selected members, the Expand button) | partial | #4522; `object.compoundShape.make`/`setMode`/`release`/`expand`; members stay editable, the area draws, exports and saves; the button of the members' shared mode is lit; blends, envelopes and warped objects are members as they draw; [spec](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/create-compound-shapes-with-pathfinder.html); missing: question marks for mixed modes, hit-testing by the area |
| Pathfinder panel: compound shapes (Make, Release and Expand Compound Shape in the panel menu, Alt-click a Shape Mode, a Shape Mode for selected members, the Expand button) | partial | #4522; `object.compoundShape.make`/`setMode`/`release`/`expand`; members stay editable, the area draws, exports and saves; the button of the members' shared mode is lit, and members in different modes put a question mark on each Shape Mode button; blends, envelopes and warped objects are members as they draw; [spec](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/create-compound-shapes-with-pathfinder.html); missing: hit-testing by the area |
| Canvas context menu | done | Right-clicking type opens the canvas menu, with Bullets and Numbering and Spelling. Artboard rows, library groups and items, the rulers and floating toolbar grips have menus too. Gaps: guide and blend spine rows have no menu, and other panels have none |
| Layers panel row context menu | done | Right-clicking a layer/group/object row shows a context menu with Options…, Duplicate, Delete, Lock/Hide Others, Locate Object, and Collect for Export — matching standard desktop layer panel conventions. |
| Swatches item context menu (G12) | done | List and thumbnail items offer Swatch Options…, Duplicate Swatch and Delete Swatch for the clicked item. Right-click selects without applying paint; reserved/missing items disable actions. All 39 Swatches tests pass, including all five views and Undo; the regression fails with the menu hooks removed. Rendered headless menus inspected. Full workspace CI passed on Linux/WSL on the merged branch (all 13 gates), including the test-helper correction for the upstream compile error tracked in #7727; native Windows full CI has two unchanged engine-test failures. |
@@ -470,7 +481,7 @@ next unit in the order a right-click on a ruler lists them, from Feet back to Po
| DXF export/import preserves intended curve closure | done | #1299; R13–2018 closed SPLINE bit set/read; an open curve ending at its start stays open; knots and control points unchanged; circular cubic paths export as native CIRCLE/ARC where stroke semantics permit; DXF Options' Preset menu and `document.exportDxf`'s `dxfPreset: "cnc"` set the CNC / CAM options (#5500) |
| macOS save sheet: choose the format from a menu | done | #866; the save panel is VectorCraft's own `NSSavePanel` with its Format menu set before the sheet opens (`apps/vectorcraft/src/mac_save_format.rs`); #1855 had withdrawn the menu that was added after the sheet began, which made Save As, Save a Copy and the first Save show no sheet |
| Preferences: every option acts | partial | 2 stored but unused (#394, audited 2026-10-30): Scratch Disks, Legacy vector clipboard; the rest act (Units › East Asian Type since 2026-10-31; Open Documents As Tabs: cleared, new documents open in floating windows). General › Corner Radius drives the Rounded Rectangle tool and follows its ↑/↓ (2026-10-24) |
| Preferences › General › Constrain Angle | done | arrow keys and Shift drags along the turned axes; the Rectangle, Rounded Rectangle, Ellipse and grid tools, point and area type and the shape size dialogs draw along them with the bounding box turned; Shift-drawn polygons and stars keep the turned base orientation; the Line Segment tool's Shift steps count from it (#394, <https://helpx.adobe.com/illustrator/desktop/manage-objects/arrange-objects/rotate-objects-by-specific-angles.html>); spirals, flares and Pen paths are not turned |
| Preferences › General › Constrain Angle | done | arrow keys and Shift drags along the turned axes; the Rectangle, Rounded Rectangle, Ellipse and grid tools, point and area type and the shape size dialogs draw along them with the bounding box turned; Shift-drawn polygons and stars keep the turned base orientation; the Line Segment tool's Shift steps count from it (#394, <https://helpx.adobe.com/illustrator/desktop/manage-objects/arrange-objects/rotate-objects-by-specific-angles.html>); flares and Pen paths are not turned |
| Tabs panel: a stop drags from where the press landed, a stop just added included | done | #1458 |
| Outline view keeps template layers in Preview, dimmed | done | #1486; a picture placed to be traced stays visible under the outlines |
| Outline view draws on a white canvas, the artboards as their edges | done | Outline shows only the paths ([Outline mode](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/preview-artwork-as-outlines.html)). VectorCraft's own rule for the canvas: in every interface brightness and Canvas Color the whole canvas is white, pasteboard included; the artboards draw no paper (no Simulate Colored Paper or artboard color, and no paper with Hide Artboards); the artboard names and the ruler origin's crosshair are dark gray; split views and floating windows follow their own view. Tests `outline_draws_on_a_white_canvas_with_artboards_as_edges`, `outline_draws_no_colored_paper`, `a_pane_draws_its_own_views_outline`, `the_ruler_origin_crosshair_shows_on_the_outline_canvas` |
@@ -484,10 +495,10 @@ next unit in the order a right-click on a ruler lists them, from Feet back to Po
| Document Tools add-on (VectorCraft addition): Object › Plug-ins › Document Tools › Batch Trace Folder asks for a folder of images, then a destination folder, traces each image with a preset (optionally expanded) and saves it there as `.vectorcraft`, `.svg`, `.pdf`, `.ai` or `.eps` under its own name (taken names numbered, nothing replaced), closing each image again; the status bar counts the images traced and those that couldn't be; off on the web | done | #4921; `addon.document.batchTraceFolder`, `crates/engine/src/cmd/addons/document/batch_trace.rs`, `crates/ui-egui/src/addons/document.rs` and their tests; not a feature of the reference app |
| Document Tools add-on (VectorCraft addition): Object › Plug-ins › Document Tools › New Symbols from Layers makes a symbol of each layer's art named after the layer (the highlighted layers when two or more are, else all); Convert Layers to Symbols also replaces each layer's art with an instance in place; empty layers skipped, one undo step | done | #4927; `addon.document.symbolsFromLayers`, `crates/engine/src/cmd/addons/document.rs`, `crates/ui-egui/src/addons/document.rs` and their tests; not a feature of the reference app, so it is not scored |
| Smart Pen add-on (VectorCraft addition): Object › Plug-ins › Smart Pen selects the Smart Pen Tool, which the All Tools drawer lists under its own heading but neither toolbar shows as shipped (no shortcut), and opens the Smart Pen panel (next segment straight or curved; Remove Points Keep Shape, Make Smooth, Make Corner, Retract Handles, Close or Join). The tool draws (click: straight or curved segment, a curve after a straight one tangent; drag: smooth anchor, Alt breaks the handle, Shift 45°, Space moves it; Tab switches a segment; rubber band; close, join, continue) and edits without switching tools (click selects a point, drag moves it, Alt-click removes it keeping the shape, Shift+Alt-click deletes it, double-click toggles smooth/corner; handle drags with Shift and Alt; segment drags reshape, Alt-click adds a point) | done | `addon.pen.*`, `crates/tools/src/addons/smart_pen.rs`, `crates/ui-egui/src/addons/pen.rs` and their tests; not a feature of the reference app, so it is not scored |
| Path Precision Tools add-on (VectorCraft addition): Object › Plug-ins › Path Precision Tools selects its eight tools (Anchor Eraser Brush, Extend Path, Measure & Inspect, Parametric Shape, Corner Tool, Slide Anchor Along Path, Shared Edge Merge Tool, Trim at Crossings Tool), which the All Tools drawer lists under their own heading but neither toolbar shows as shipped, opens the Anchor Inspector panel (the selected anchor's X/Y and handle lengths and angles as fields; Make Smooth, Make Corner, Equalize Handles, Remove Points Keep Shape, Add Points, the three ways to close) and the Parametric Shape panel (kind, count, W/H, rotation, the kind's own values and corner radius of the selected parametric shape, or of the tool's next one), and runs Add Points at / Split at Crossings and Convert to Parametric Shape; the Parametric Shape Tool draws ten re-editable kinds from the centre (↑/↓ and ←/→ change their numbers while dragging) and edits a selected one with handles; the Corner Tool cuts editable corners on any path (hover shows the anchor, a click uses its radius and kind, a drag sizes the corner, Shift whole values; a corner's marker selects it and loads its values, drags to resize, to 0 or double-clicked removes it; never past what fits; Alt-marquee cuts every anchor inside) with a Corners section in the Anchor Inspector (radius, kind, selected count, Apply to Selected Anchors); Slide Anchor Along Path drags an anchor along its curve with the segments beside it refitted, Shift snapping where the tangent is a multiple of 45°; the Shared Edge Merge Tool shows, over two paths touching at two coincident anchors, the two stretches and the edge merging them, a click merges them (half way; Shift the upper path, Alt the lower), and near anchors meet or an anchor one path lacks is added to match (Shift+Alt asks for this inside a stretch), with a Shared Edges section in the Anchor Inspector (brush diameter, coincidence 0 to 3 pt, Keep Shared Points Together, which takes coincident anchors along with the add-on's own anchor moves); a double-click on the brush or Extend Path tool opens its options | done | `addon.pathtools.*`, `crates/tools/src/addons/`, `crates/ui-egui/src/addons/pathtools.rs`, `crates/ui-egui/src/addons/pathtools/` and their tests; not a feature of the reference app, so it is not scored |
| Path Precision Tools add-on (VectorCraft addition): Object › Plug-ins › Path Precision Tools selects its eight tools (Anchor Eraser Brush, Extend Path, Measure & Inspect, Parametric Shape, Corner Tool, Slide Anchor Along Path, Shared Edge Merge Tool, Trim at Crossings Tool), which the All Tools drawer lists under their own heading but neither toolbar shows as shipped (except Trim at Crossings, which both shipped toolbars and the drawer show in the Scissors tool's group), opens the Anchor Inspector panel (the selected anchor's X/Y and handle lengths and angles as fields; Make Smooth, Make Corner, Equalize Handles, Remove Points Keep Shape, Add Points, the three ways to close) and the Parametric Shape panel (kind, count, W/H, rotation, the kind's own values and corner radius of the selected parametric shape, or of the tool's next one), and runs Add Points at / Split at Crossings and Convert to Parametric Shape; the Parametric Shape Tool draws ten re-editable kinds from the centre (↑/↓ and ←/→ change their numbers while dragging) and edits a selected one with handles; the Corner Tool cuts editable corners on any path (hover shows the anchor, a click uses its radius and kind, a drag sizes the corner, Shift whole values; a corner's marker selects it and loads its values, drags to resize, to 0 or double-clicked removes it; never past what fits; Alt-marquee cuts every anchor inside) with a Corners section in the Anchor Inspector (radius, kind, selected count, Apply to Selected Anchors); Slide Anchor Along Path drags an anchor along its curve with the segments beside it refitted, Shift snapping where the tangent is a multiple of 45°; the Shared Edge Merge Tool shows, over two paths touching at two coincident anchors, the two stretches and the edge merging them, a click merges them (half way; Shift the upper path, Alt the lower), and near anchors meet or an anchor one path lacks is added to match (Shift+Alt asks for this inside a stretch), with a Shared Edges section in the Anchor Inspector (brush diameter, coincidence 0 to 3 pt, Keep Shared Points Together, which takes coincident anchors along with the add-on's own anchor moves); a double-click on the brush or Extend Path tool opens its options | done | `addon.pathtools.*`, `crates/tools/src/addons/`, `crates/ui-egui/src/addons/pathtools.rs`, `crates/ui-egui/src/addons/pathtools/` and their tests; not a feature of the reference app, so it is not scored |
| Path Precision Tools add-on (VectorCraft addition): Object › Plug-ins › Path Precision Tools › Divide into Dashes… (Dash and Gap in any unit, Fit to Corners and Ends, Remove Gaps; Preview) cuts the selected paths, or only their direct-selected segments, into open pieces along the curve, keeping their appearance, one undo step | done | #4950; `addon.pathtools.divideDashes`, `crates/pathops/src/addons/pathtools/dashes.rs`, `crates/ui-egui/src/addons/pathtools/dashes.rs` and their tests; not a feature of the reference app, so it is not scored |
| Path Precision Tools add-on (VectorCraft addition): Object › Plug-ins › Path Precision Tools › Set Corners… (also a button in the Anchor Inspector's Corners section: Radius in any unit, Corner kind, Anchors: All, Odd-Numbered or Even-Numbered, counted from each path's first anchor; Angle: from … to …°, only the corners whose sides meet at an angle in that range; Preview) cuts corners on the chosen anchors of every selected path, one undo step | done | #5546, #5545; `addon.pathtools.cornerSet` (`every`, `minAngle`, `maxAngle`), `crates/ui-egui/src/addons/pathtools/set_corners.rs` and their tests; not a feature of the reference app, so it is not scored |
| Path Precision Tools add-on (VectorCraft addition): Object › Plug-ins › Path Precision Tools › Trim at Crossings Tool (in the All Tools drawer under the add-on's heading, in neither toolbar as shipped, no shortcut) removes stretches of paths between the places where they are crossed, on any editable path, selected or not: a click removes the stretch under the pointer, a drag every stretch its rectangle touches, an Alt-drag every stretch its freehand line crosses; one undo step each; Escape during a drag removes nothing; hovering shows in red the stretch a click would remove, and a drag that reaches few paths shows what its release would remove | done | `addon.pathtools.trim` (in `crates/engine/src/cmd/addons/pathtools/trim.rs`), `crates/tools/src/addons/trim.rs` and their tests; not a feature of the reference app, so it is not scored |
| Path Precision Tools add-on (VectorCraft addition): Object › Plug-ins › Path Precision Tools › Trim at Crossings Tool (also in the Scissors tool's group in both shipped toolbars, after the Knife, and listed there in the All Tools drawer; a toolbar edited before keeps its saved layout until Reset Toolbar; no shortcut until one is set in Edit › Keyboard Shortcuts › Tools; the Knife's cursor, drawn as a knife with the blade's point on the hotspot) removes stretches of paths between the places where they are crossed, on any editable path, selected or not: a click removes the stretch under the pointer, a drag removes every stretch its rectangle touches, and an Alt-drag removes every stretch its freehand line crosses; one undo step each; Escape during a drag removes nothing; hovering shows in red the stretch a click would remove, and a drag that reaches few paths shows what its release would remove | done | `addon.pathtools.trim` (in `crates/engine/src/cmd/addons/pathtools/trim.rs`), `crates/tools/src/addons/trim.rs` and their tests; not a feature of the reference app, so it is not scored |
| Path Precision Tools add-on (VectorCraft addition): Object › Plug-ins › Path Precision Tools › Expand Dashes into Paths turns each selected path's dashed stroke into separate open paths, one per dash, laid out as the stroke draws them (pattern, offset, Align Dashes to Corners and Path Ends), each keeping the stroke with the dashes off; one undo step | done | #4922; `addon.pathtools.expandDashes` (in `crates/engine/src/cmd/addons/pathtools.rs`, using the renderer's dash layout) and its tests; not a feature of the reference app, so it is not scored |
| Path Precision Tools add-on (VectorCraft addition): Object › Plug-ins › Path Precision Tools › Tangent Circle… draws the circles that touch two selected paths or compound paths at a radius, or three of them, each touching the outlines without crossing them; Radius (two shapes), a Circle menu (All or one by number) and Preview; one undo step | done | `addon.pathtools.tangentCircle` (in `crates/engine/src/cmd/addons/pathtools/tangent_circle.rs`, geometry in `crates/pathops/src/addons/pathtools/tangent_circle.rs`) and its tests; a VectorCraft addition, so it is not scored |
| Path Precision Tools add-on (VectorCraft addition): Effect › Path Effects lists its live effects (Dashes to Geometry, Add Anchors, Extend Path, Close Path, Smooth Anchors, Retract Handles, Reverse Direction, Simplify Anchors, Split at Anchors), each with the effect dialog's live Preview except Reverse Direction, which has no options, and listed in the Appearance panel like any effect | done | `addon.path.*`, `crates/effects/src/addons/path.rs`, `crates/ui-egui/src/addons/pathtools.rs` and their tests; not a feature of the reference app, so it is not scored |