mirror of
https://github.com/storytold/vectorcraft.git
synced 2026-11-21 01:44:57 +01:00
Merge main into fix/blend-reversed-key-stroke-direction
This commit is contained in:
commit
81ec6498dc
233 files changed
+15782
-1309
No files matched your search
+9
-5
@@ -15,13 +15,17 @@ The **Dimension Tool** is in the Modify section of the toolbar. Its strip offers
|
||||
path's length. A press on an anchor picks it when the pointer moves less than 8 pixels
|
||||
before the release; a longer drag drags out the dimension of the segment under the pointer. A
|
||||
curved segment is measured from end to end. With Smart Guides on, both points also snap into line with other objects'
|
||||
anchors and centres, and the second onto the construction guides through the first; the guides
|
||||
anchors and centres. With Snap to Perpendicular or Snap to Tangent on, the second point also
|
||||
snaps onto a segment where the line from the first meets it square or grazes a curve. When the
|
||||
first point was picked on an anchor, the second also snaps onto the construction guides through
|
||||
it; any other first point has no construction guides through it. The guides
|
||||
show while hovering, before each click. VectorCraft's own rules decide where a point lands: an
|
||||
anchor within 8 pixels takes it first; a point on a guide stays on the guide where the pointer
|
||||
is, except that it moves onto a segment within the Smart Guides snapping tolerance, or onto the
|
||||
place where a construction guide crosses another object's alignment line within twice that
|
||||
tolerance; a point that no anchor, guide, grid or pixel snapping places lands on the closest
|
||||
point of a segment within 8 pixels.
|
||||
is, except that it moves onto a segment within the Smart Guides snapping tolerance, or, on a
|
||||
construction guide or a Snap to Glyph guide that runs at an angle, onto the place where that
|
||||
guide crosses another object's alignment line within twice that tolerance; a point that no
|
||||
anchor, guide, grid or pixel snapping places lands on the closest point of a segment within 8
|
||||
pixels.
|
||||
A linear dimension is aligned, horizontal or vertical, as the
|
||||
[linear dimensions help](https://helpx.adobe.com/illustrator/desktop/measure-and-align/plot-and-measure/plot-linear-dimensions-of-objects.html)
|
||||
describes: after the second click, clicking again places an aligned dimension, and moving the
|
||||
|
||||
@@ -282,7 +282,7 @@ Names in the editing data that aren't UTF-8 (layers, objects, artboards, colors,
|
||||
| Illustrator template `.ait` | open, save | yes | PDF-compatible only, from Save as Template (`.vctemplate` stays its default) | New from Template opens a saved `.ait` untitled with its layers and art (`tests_pdfedit.rs`) |
|
||||
| Illustrator `.ai` | open, save | yes (PDF-compatible + editing-data structure with template layers and ruler guides, File Info) | PDF-compatible, or legacy version 7 (layers and groups) | see above; no real-file corpus |
|
||||
| PDF | open, place, save | yes (authored ActualText in editable import, #6165; layers, masks, editable text, security, overprint, File Info from the XMP packet and the document information dictionary; Crop To › Trim takes the bleed box as the document's bleed) | yes (presets, PDF/X-1a/3/4, layers, marks and bleed, ICC, fast web view, 1.3+; objects' URLs as link annotations, not in PDF/X) | fuzzed import; shared guarded writer and windowed reader ([pdf-backend.md](pdf-backend.md)), metadata, incomplete-content and dependency-source regressions; PDF text opens where the file draws it, glyph by glyph (#722: kerning or none, spacing per character, text rise as baseline shift, vertical writing, justified text boxes); alpha soft masks drawn as images import with the mask (#1551); a clip only counts as covering the page when its shape does (#1542); a PDF another app copied pastes as editable vector art (#1499); letter-spaced type on a path keeps its length and its glyph-by-glyph stroke comes in as one text object (#1586, #1585); a crafted name tree with shared nodes no longer takes exponential time on open (#1781); fonts named with hyphens (`Noto-Sans-Bold`) or with a composite font's CMap (`Name-Identity-H`) find the installed family; invisible text (rendering mode 3: a scanned page's recognized text) opens as type with no fill or stroke and saves back as invisible, searchable text (#2675); PDF/X-1a and X-3 flattening in a CMYK document keeps CMYK inks where it rasterizes (#2160); an image mask (`/ImageMask true`) painted in a solid color opens as a grayscale image colorized by that color, a spot color keeping its swatch and tint, so Fill and Recolor Artwork reach it, and the same mask painted again in another color keeps that color (#6313); an image in a Separation space opens as a grayscale image of its tints colorized by its ink at 100 % (a spot swatch, a process plate or Registration), its soft mask as its opacity mask (#6314); a DeviceN image of one colorant opens the same way, and one of process plates only (the ink `None` may be among them) opens in CMYK with each colorant's tint in its plate (#6348) PDF export keeps harakat and zero-advance Noto Arabic dot glyphs in one compatible batch per layout line, with per-glyph vertical offsets (#6309). `crates/pdf/src/tests/realtext.rs` (`mark_text_*`) checks decoded cluster mappings, mixed Arabic/Latin/digits, contour placement against outline export, vertical columns, differing path rotations and PDF/X-1a/3/4. Editable-text import preserves authored ActualText separately (#6165), with cross-line/style layout limits; separately styled or differently rotated clusters and external viewer search/copy remain outside this export-only evidence. |
|
||||
| EPS | open, place, save | yes (own PostScript L3 interpreter, Illustrator EPS editing data structure) | yes (L2/L3, TIFF previews) | CIDFonts the file doesn't carry not drawn, but for those over a predefined CMap (`UniJIS-UCS2-H`, `90ms-RKSJ-H`, `GBK-EUC-H`, `KSCms-UHC-H`, `ETen-B5-H`), set as type in the font of the CIDFont's name, vertical over a `-V` CMap; a name that ends in the row-and-cell CMap `H` or `V` splits off the CMap only when the file defines the CIDFont of that name, or the name has a hyphen and an installed face that covers Japanese has it; name-keyed fonts in a FontSet set as type by name; #505; images encoded with `CCITTFaxDecode` (ITU-T T.4 Group 3 and T.6 Group 4, with `K`, `Columns`, `Rows`, `EndOfBlock`, `EndOfLine`, `EncodedByteAlign` and `BlackIs1`) draw, and damaged data keeps the rows decoded before its first damaged row; Type 42 (TrueType) fonts set type at its size (#1553); an embedded Type 1 font's encrypted part is read for its glyphs, which space its type, outline it and draw glyphs without a character, in plain and composite fonts; a Type 42 font that carries its TrueType font gives each code its character by its glyph name or, for names that say nothing (`/g12`), by the glyph's entry in the font's own character map, spaces its type by its own widths and draws glyphs that stand for no character from its outlines; the show operators' spacing along the baseline (`ashow`, `widthshow`, `xshow`, `yshow`, `xyshow`, and the moves of `kshow`'s procedure, run between each two characters) is kept on live type as tracking, so type in a font that isn't installed keeps the file's line lengths (spacing that moves characters off the baseline, as `yshow`, `xyshow` or a `kshow` procedure can, places each character as its own text object); composite (Type 0) fonts with the 8/8 mapping, as PDF-to-PostScript converters write two-byte fonts, draw a Type 42 descendant's glyphs from the TrueType outlines it carries and an embedded Type 1 descendant's from its charstrings, and set other descendants' characters as type at the composite font's size (other mappings are still set as type in the font of their name); CID-keyed fonts (`composefont`, `FMapType` 9 over a CMap built with the CIDInit operators or `Identity-H`/`Identity-V`; `bfchar` and `bfrange` mappings give a base-font descendant its codes or glyph names) draw the glyphs of the Type 0 CIDFonts (Type 1 charstrings in their `StartData` binary data or `GlyphDirectory`) and Type 2 CIDFonts (TrueType glyphs through `CIDMap`) they carry, and the CID-keyed fonts of a FontSet's Compact Font Format data (Type 2 charstrings); a clip only counts as covering the page when its shape does (#1542); an EPS another app copied pastes as editable vector art (`clipboard.importEps`, #1499); a stitched shading keeps its hard colour changes on import (#1654); sampled functions (type 0) interpolate between their samples, multilinearly or by cubics with `Order 3`, and a sampled axial or radial gradient has a stop at each sample; a gradient the page paints as a row of abutting one-colour strips (as Level 2 writers draw smooth shades) imports as one linear gradient, without the seams the strips leave when each is drawn alone; CMYK images, CMYK JPEGs included, keep their ink amounts on import, as from PDF, and the pixels a `MaskColor` or `ImageType 3` mask hides become a grayscale opacity mask; ruzstd 0.9.1 for compressed editing data (#1807, RUSTSEC-2026-0344) |
|
||||
| EPS | open, place, save | yes (own PostScript L3 interpreter, Illustrator EPS editing data structure) | yes (L2/L3, TIFF previews) | CIDFonts the file doesn't carry not drawn, but for those over a predefined CMap (`UniJIS-UCS2-H`, `90ms-RKSJ-H`, `GBK-EUC-H`, `KSCms-UHC-H`, `ETen-B5-H`), set as type in the font of the CIDFont's name, vertical over a `-V` CMap; a name that ends in the row-and-cell CMap `H` or `V` splits off the CMap only when the file defines the CIDFont of that name, the CIDFont is `Ryumin-Light` or `GothicBBB-Medium` (the Japanese CIDFonts a printer carries), or the name has a hyphen and an installed face that covers Japanese has it; name-keyed fonts in a FontSet set as type by name; #505; images encoded with `CCITTFaxDecode` (ITU-T T.4 Group 3 and T.6 Group 4, with `K`, `Columns`, `Rows`, `EndOfBlock`, `EndOfLine`, `EncodedByteAlign` and `BlackIs1`) draw, and damaged data keeps the rows decoded before its first damaged row; Type 42 (TrueType) fonts set type at its size (#1553); an embedded Type 1 font's encrypted part is read for its glyphs, which space its type, outline it and draw glyphs without a character, in plain and composite fonts; a Type 42 font that carries its TrueType font gives each code its character by its glyph name or, for names that say nothing (`/g12`), by the glyph's entry in the font's own character map, spaces its type by its own widths and draws glyphs that stand for no character from its outlines; the show operators' spacing along the baseline (`ashow`, `widthshow`, `xshow`, `yshow`, `xyshow`, and the moves of `kshow`'s procedure, run between each two characters) is kept on live type as tracking, so type in a font that isn't installed keeps the file's line lengths (spacing that moves characters off the baseline, as `yshow`, `xyshow` or a `kshow` procedure can, places each character as its own text object); composite (Type 0) fonts with the 8/8 mapping, as PDF-to-PostScript converters write two-byte fonts, draw a Type 42 descendant's glyphs from the TrueType outlines it carries and an embedded Type 1 descendant's from its charstrings, and set other descendants' characters as type at the composite font's size (other mappings are still set as type in the font of their name); CID-keyed fonts (`composefont`, `FMapType` 9 over a CMap built with the CIDInit operators or `Identity-H`/`Identity-V`; `bfchar` and `bfrange` mappings give a base-font descendant its codes or glyph names) draw the glyphs of the Type 0 CIDFonts (Type 1 charstrings in their `StartData` binary data or `GlyphDirectory`) and Type 2 CIDFonts (TrueType glyphs through `CIDMap`) they carry, and the CID-keyed fonts of a FontSet's Compact Font Format data (Type 2 charstrings); a clip only counts as covering the page when its shape does (#1542); an EPS another app copied pastes as editable vector art (`clipboard.importEps`, #1499); a stitched shading keeps its hard colour changes on import (#1654); sampled functions (type 0) interpolate between their samples, multilinearly or by cubics with `Order 3`, and a sampled axial or radial gradient has a stop at each sample; a gradient the page paints as a row of abutting one-colour strips (as Level 2 writers draw smooth shades) imports as one linear gradient, without the seams the strips leave when each is drawn alone; CMYK images, CMYK JPEGs included, keep their ink amounts on import, as from PDF, and the pixels a `MaskColor` or `ImageType 3` mask hides become a grayscale opacity mask; ruzstd 0.9.1 for compressed editing data (#1807, RUSTSEC-2026-0344) |
|
||||
| PostScript `.ps` | open, place | yes (the EPS reader reads its first page; `.epsf` files open and place as EPS) | via Print to PostScript | `tests_epsimport.rs` |
|
||||
| DCS 1.0 / 2.0 | place linked | place linked only (one image of the plates; spot plates as spot swatches; the composite's clipping path; each plate on its own ink in Separations Preview and print separations) | no | `crates/eps/src/dcs/tests.rs`, `crates/engine/src/tests/dcs.rs` |
|
||||
| SVG / SVGZ | open, place, save | yes | yes (SVG Options, Preserve Editing, symbols, filters, rich text) | strongest format; tests in `crates/svg/tests`; text on a path follows basic shapes as their SVG 2 equivalent paths (#1527); CSS transforms and the `font` shorthand (#1565), percentage lengths in symbols (#1596), Inkscape flowed text as area type (#1568) and Inkscape pages as artboards (#1601) import; an unsupported filter is named in its warning (#1598); an artboard exported on its own (Export As with Use Artboards, Export for Screens, Asset Export) has the artboard's name as `<title>`, Save the document's (#3544); attributes in other applications' XML namespaces (`plotter:pen="2"`) kept on their objects from import to export, as `data-*` attributes are (`crates/svg/tests/it/foreign_attributes.rs`); simple shapes export as `<rect>`, `<circle>`, `<ellipse>`, `<line>`, `<polygon>` and `<polyline>` where they draw the same as the path (#4652, `crates/svg/tests/it/basic_shapes.rs`); the regions of exported masks and filters (opacity masks, inverted masks, knockout groups) cover the art they apply to, and over type keep a region that covers any artwork (#6401, `crates/svg/tests/it/blend_export.rs`); a masked group, or a knockout group's masked group, whose content has a shadow, glow, blur or feather starts with a hidden, unpainted rectangle over the mask's region, so readers that draw a masked group only inside the box of its shapes draw those effects too (`crates/svg/tests/it/blend_export.rs`); SVG Options › Include Variable Data writes the text variables, data sets and bound type objects, and opening the SVG reads them back (`tests::variables::an_svg_with_variable_data_opens_with_its_variables_data_sets_and_bindings`) |
|
||||
|
||||
+6
-2
@@ -34,6 +34,7 @@ Artboard Options forwards the active Artboard tool's Scale Artwork with Artboard
|
||||
|
||||
| Date | Change | Summary |
|
||||
|---|---|---|
|
||||
| 2026-11-14 | minor | G12: Symbols panel context menu: right-click on a symbol in thumbnail or list view displays a context menu (Place Symbol Instance, Edit Symbol, Duplicate Symbol, Delete Symbol, Break Link to Symbol, Select All Instances), selecting the symbol first if unselected; scores and estimates unchanged. |
|
||||
| 2026-11-14 | minor | G5: Weather Icons joins Basic Shapes, UI Frames, Map Markers, Inventory Icons and Skill Icons as a sixth built-in symbol library (Sun, Moon, Cloud, Rain, Thunder, Snow; original procedural vector symbols generated in code, no default 9-slice); estimate decremented (5–15 → 4–14 h). |
|
||||
| 2026-11-14 | minor | G12: Layers panel row context menu (Options…, Duplicate, Delete, Lock Others/Show All/Hide Others/Unlock All, Locate Object, Collect for Export) with selection handling and undo tracking. Scores and estimates unchanged. |
|
||||
| 2026-11-13 | minor | PDF import: preserve Type 3 font text runs as named groups `<g>`, or as live text in `TextAs::Text` mode if `/ToUnicode` exists on non-colour fonts (`TextAs::Outlines` produces grouped outlines) (#6740); scores and estimates unchanged. |
|
||||
@@ -465,6 +466,7 @@ macOS cursor delivery (#2292) is narrowed to a native host adapter using the exi
|
||||
|
||||
## G12 Preferences and panels that don't act yet
|
||||
|
||||
- **Done (2026-11-14):** Symbols panel context menu: right-click on a symbol in thumbnail or list view displays a context menu with Place Symbol Instance, Edit Symbol, Duplicate Symbol, Delete Symbol, Break Link to Symbol (enabled when canvas selection includes instances of the symbol), and Select All Instances, selecting the symbol if unselected. Estimate unchanged.
|
||||
- **Done (2026-10-29, #4522):** the Pathfinder panel menu's Make, Release and Expand Compound Shape, which were dimmed placeholders, and the panel's Expand button act on live compound shapes ([Create compound shapes with Pathfinder](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/create-compound-shapes-with-pathfinder.html)): Alt-clicking a Shape Mode makes one in that mode, a Shape Mode sets the mode of the members selected, and the compound shape draws, exports and saves as the area its members' modes make (`object.compoundShape.*`, `crates/engine/src/tests/compound_shape.rs`). Left: blends, envelopes and warps as members, question marks on the buttons for mixed member modes, clicks that hit the area rather than the members. Estimate unchanged.
|
||||
- **Done (2026-10-25, #3426):** Pathfinder panel › Pathfinder Options… ([Pathfinder panel overview](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/pathfinder-panel-overview.html)): Precision (0.001–10 pt; results are refit to within it and pieces thinner than it are dropped), Remove Redundant Points and Divide and Outline Will Remove Unpainted Artwork (pieces of objects with no fill), kept in the preferences (`object.pathfinder.options`, group `pathfinder`) and used by every Shape Mode and Pathfinder button and Repeat; the page gives no defaults, so ours (0.01 pt, both off) keep the earlier results byte for byte. Trap is left as it was. Estimate unchanged.
|
||||
- **Done (2026-10-25):** Artboards panel › Delete Empty Artboards ([Delete artboards](https://helpx.adobe.com/illustrator/desktop/create-manage-artboards/add-edit-artboards/delete-artboards.html), [artboard context menu](https://helpx.adobe.com/illustrator/desktop/create-manage-artboards/organize-manage-artboards/use-artboard-context-menu.html)): `artboard.deleteEmpty` deletes every unlocked artboard with no artwork, with its guides, in one undo step, and keeps artboard 1 when every artboard is empty and none is locked; an artboard is empty when no object (hidden, locked and template art included; guides not) has visual bounds that meet or touch it, a group counting by its members and a clip group or clipping layer by its members inside the clip (our reading of "no artwork"; the pages give no finer rule). The Artboard tool's canvas context menu lists it too. Estimate unchanged.
|
||||
@@ -632,6 +634,9 @@ macOS cursor delivery (#2292) is narrowed to a native host adapter using the exi
|
||||
made to an object inside it at the object in the same place ([public source](https://helpx.adobe.com/illustrator/desktop/manage-objects/edit-objects/edit-groups-with-similar-objects.html));
|
||||
a group that holds type or an image is not taken, as Global Edit does not take images or text
|
||||
([public source](https://helpx.adobe.com/illustrator/desktop/manage-objects/edit-objects/edit-similar-objects.html));
|
||||
rotated copies of the object or group are taken too, and an edit reaches each turned by its angle
|
||||
([public source](https://helpx.adobe.com/vn_vi/illustrator/how-to/modern-logo-design.html); reflected copies are not
|
||||
taken, VectorCraft's own rule);
|
||||
with one such object or group selected with the Selection tool, the objects Start Global Edit would take are
|
||||
highlighted on the canvas before it starts (`selecting_one_object_highlights_the_similar_objects_before_global_edit_starts`);
|
||||
dynamic symbols (#4938): Symbol Options › Symbol Type (Dynamic Symbol / Static Symbol; `type` on
|
||||
@@ -677,8 +682,7 @@ macOS cursor delivery (#2292) is narrowed to a native host adapter using the exi
|
||||
painted with the texture effects; User Defined; Other Library…; `graphicStyle.libraries`,
|
||||
`graphicStyle.addFromLibrary`).
|
||||
- **Missing:** more built-in brush libraries beyond the eight shipped (and further graphic-style libraries beyond the ten shipped, and further symbol libraries beyond Basic
|
||||
Shapes, UI Frames, Map Markers, Inventory Icons, Skill Icons and Weather Icons; original, generated in code, never Adobe's); dynamic symbols' `.ai` read and write;
|
||||
Global Edit of rotated copies as matches.
|
||||
Shapes, UI Frames, Map Markers, Inventory Icons, Skill Icons and Weather Icons; original, generated in code, never Adobe's); dynamic symbols' `.ai` read and write.
|
||||
- **Estimate:** 4–14 h.
|
||||
|
||||
## G3 3D and Materials
|
||||
|
||||
@@ -98,8 +98,12 @@ main added paragraph labels, spine-index validation and two error messages: six
|
||||
Main's workspace version is still 0.21.0; this PR does not change release versioning.
|
||||
|
||||
`cargo test -p vectorcraft-ui-egui --lib i18n::tests` passes all 55 tests in Ubuntu 24.04 (WSL).
|
||||
The untranslated report has no Hindi section, meaning it found no missing Hindi rows among the
|
||||
categories it checks. This does not check dynamically assembled strings that the scanners miss.
|
||||
On 2026-11-14 the untranslated report on main (`f793044f83`) has a Hindi section with 608
|
||||
missing rows: 28 menu strings, 30 `tl!` strings, 11 undo labels and 539 messages. Its
|
||||
`every language` section lists 68 more that every checked language lacks, Hindi included: 10 menu
|
||||
strings, 2 undo labels and 56 messages. These include labels for newer features and command
|
||||
parameter, script and file import or export errors, which show in English until a catalog row
|
||||
is added. The report does not check dynamically assembled strings that the scanners miss.
|
||||
Additional checks compare placeholders, backtick-delimited identifiers and numeric values.
|
||||
The native Hindi UI fallback test also passes with the installed Nirmala UI font. A running
|
||||
desktop preview was checked in Hindi, including the New Document dialog and File menu.
|
||||
|
||||
@@ -31,21 +31,21 @@ Chinese by `imachus`). Georgian and the original Gujarati catalog are recorded a
|
||||
| English | `en` | source, 100% | all | Latin | — | full | — |
|
||||
| Simplified Chinese (Mandarin) | `zh-hans` | 5,102 rows, 791 of them `@msg` (counted 2026-10-21): menus, `tl!` literals and messages complete when counted | all (3,554 `@msg` and 48 `@msgplural` rows, counted 2026-11-13: the untranslated report lists 55 missing messages for it, which open #7116, #7211, #7330, #7378 and #7405 translate) | CJK UI font from craft-fonts (BIZ UDPGothic) when embedded, else a system font; IME with marked text at the caret; vertical type partial ([type-parity.md](type-parity.md)) | no | full | — (review) |
|
||||
| Spanish | `es` | 4,009 / 4,020 (99.7%) | all (604 messages) | Latin | no | full | — (review) |
|
||||
| Hindi | `hi` | 8,782 rows (2026-11-13): 3,014 `@msg`, 47 `@msgplural`, 41 `@plural`; no gaps in the untranslated report | menus, dialogs, tooltips and scanned messages; contributor-approved loanword terminology; agent wording pass | UI and document text shape with HarfRust; installed desktop Devanagari fallback, or a `Deva` craft-fonts face; web font still needed | contributor terminology review; 2026-11-13 wording pass on messages and longer labels, with a glossary-term test; wider proofread welcome | complete catalog, machine-assisted draft | native review, layout and web font |
|
||||
| Hindi | `hi` | 8,782 rows (2026-11-13): 3,014 `@msg`, 47 `@msgplural`, 41 `@plural`; the untranslated report on main `f793044f83` (2026-11-14) lists 676 missing rows for it: 608 in its own section and 68 that every checked language lacks | menus, dialogs, tooltips and scanned messages; contributor-approved loanword terminology; agent wording pass | UI and document text shape with HarfRust; installed desktop Devanagari fallback, or a `Deva` craft-fonts face; web font still needed | contributor terminology review; 2026-11-13 wording pass on messages and longer labels, with a glossary-term test; wider proofread welcome | complete catalog, machine-assisted draft | reported missing rows, native review, layout and web font |
|
||||
| Gujarati | `gu` | 4,673 rows (2026-11-14): original 4,286 unchanged; all 387 additions contributor-reviewed and approved | menus and dialogs; status/error messages partial | installed Gujarati fonts on desktop; optional `Gujr` craft-fonts fallback; no Gujarati face in the pinned CI/release fonts or web startup list | original catalog reviewed by a native speaker; all 387 later additions approved by the contributor, with 11 wording corrections | contributor-reviewed catalog | remaining messages and a bundled Gujarati web font |
|
||||
| Arabic | `ar` | 0 | none | document text: bidi layout and Paragraph Direction; interface: no right-to-left layout, no Arabic shaping in egui | no | none | 25–40 |
|
||||
| French | `fr` | 9,166 rows, 3,436 of them `@msg` and 48 `@msgplural` (counted 2026-11-13): the untranslated report lists 178 missing messages for it | all | Latin | no | full | — (review) |
|
||||
| Portuguese | `pt-br` | 9,378 rows, 3,563 of them `@msg` and 48 `@msgplural` (counted 2026-11-13): the untranslated report lists 55 missing messages for it, which open #7116, #7211, #7330, #7378 and #7405 translate; one/other plurals | all | Latin | contributor is a Brazilian Portuguese speaker; further native review welcome | full | — (review) |
|
||||
| Indonesian | `id` | 5,279 rows, 750 of them `@msg` (counted 2026-10-21): menus and `tl!` literals complete when counted; its messages are partial; one plural form | dialogs and tooltips all; 750 message rows (French has 796) | Latin | no | full | — (review) |
|
||||
| Indonesian | `id` | 6,825 rows, 1,036 of them `@msg` and 47 `@msgplural` (counted 2026-11-14 on `main` at `676f0524cc`): the untranslated report lists 60 missing menu strings, 35 `tl!` literals and 13 undo labels for it; not in `COMPLETE_MESSAGES`, and checked against the same scanned messages it lacks 2,508; one plural form | most dialogs and tooltips; status and error messages partial | Latin | no | full | — (review) |
|
||||
| Japanese | `ja` | 4,004 / 4,020 (99.6%) | all | CJK UI font as above; Japanese IME; vertical type partial; Japanese crop marks and composition settings | no | full | — (review) |
|
||||
| German | `de` | 3,952 / 4,020 (98%; menus, literals and messages complete when counted) | all (3,563 `@msg` and 48 `@msgplural` rows, counted 2026-11-13: the untranslated report lists 52 missing messages for it, which open #7116, #7211 and #7378 translate) | Latin | contributor-written, not reviewed | full | — (review) |
|
||||
| Korean | `ko` | 4,870 rows (counted 2026-10-21): menus, `tl!` literals and messages complete when counted; one plural form | all (3,438 `@msg` and 48 `@msgplural` rows, counted 2026-11-13: the untranslated report lists 39 missing messages for it) | Hangul from an installed system font on the desktop (Apple SD Gothic Neo, Malgun Gothic, Noto Sans CJK KR…); the web build has no Korean UI font yet (craft-fonts); IME path exists | no (AI-drafted) | full | — (review; web font) |
|
||||
| Vietnamese | `vi` | 4,886 rows (counted 2026-10-21): menus, `tl!` literals and messages complete when counted; one plural form; 4,046 plain + 18 `@plural` + 28 contextual + 794 `@msg` | all | Latin with Vietnamese diacritics (stacked marks attach in precomposed, decomposed and keyboard forms, #4491; glyph tests pass) | contributor is a Vietnamese speaker; AI-assisted draft, further native review welcome | full | — (review) |
|
||||
| Vietnamese | `vi` | 4,886 rows (counted 2026-10-21): menus, `tl!` literals and messages complete when counted; one plural form; 4,046 plain + 18 `@plural` + 28 contextual + 794 `@msg` | dialogs and tooltips all; messages partial (1,750 `@msg` and 49 `@msgplural` rows, counted 2026-11-14: the untranslated report lists 1,875 messages without a Vietnamese row, 53 of which open #7211, #7378, #7405 and #7434 translate) | Latin with Vietnamese diacritics (stacked marks attach in precomposed, decomposed and keyboard forms, #4491; glyph tests pass) | contributor is a Vietnamese speaker; AI-assisted draft, further native review welcome | full | — (review) |
|
||||
|
||||
**Historical 12-language score: ~82%** (equal weights: 100 + 85 + 100 + 0 + 0 + 100 + 100 + 100 + 100 + 98 + 100 + 100, over 12).
|
||||
**To `full` for all twelve: ~50–85 h** (historical estimate, not re-scored here). Hindi now has
|
||||
a complete catalog and UI shaping; its remaining work is native review, layout checking and the
|
||||
web font. Arabic still needs its catalog and right-to-left interface. Each new Latin-script catalog is ~4,000 rows; the existing ones were written in a few agent hours each
|
||||
a catalog that the tests count as complete, and UI shaping; its remaining work is the rows the
|
||||
untranslated report lists for it, native review, layout checking and the web font. Arabic still needs its catalog and right-to-left interface. Each new Latin-script catalog is ~4,000 rows; the existing ones were written in a few agent hours each
|
||||
plus review. Native-speaker review is human work and isn't in the hours.
|
||||
|
||||
## Other shipped languages
|
||||
@@ -53,22 +53,21 @@ plus review. Native-speaker review is human work and isn't in the hours.
|
||||
| Language | Code | Translated | Status |
|
||||
|---|---|---|---|
|
||||
| Traditional Chinese (Taiwan) | `zh-hant` | 8,820 rows, 3,438 of them `@msg` and 48 `@msgplural` (counted 2026-11-13): the untranslated report lists 40 missing messages for it; menus, `tl!` literals and messages were complete when counted on 2026-10-21 (80% overall) | partial |
|
||||
| Italian | `it` | 8,757 rows, 3,422 of them `@msg` and 48 `@msgplural` (counted 2026-11-13): the untranslated report lists 40 missing messages for it | full |
|
||||
| Italian | `it` | 8,924 rows, 3,560 of them `@msg` and 48 `@msgplural` (counted 2026-11-13): the untranslated report lists 54 missing messages for it, which open #7116, #7211, #7378 and #7405 translate | full |
|
||||
| Dutch | `nl` | 3,447 `@msg` and 48 `@msgplural` rows (counted 2026-11-13): in `COMPLETE_MESSAGES`, and the untranslated report lists 41 missing messages for it; one/other plurals | full |
|
||||
| Danish | `da` | 5,279 rows, 750 of them `@msg` (counted 2026-10-21): menus and `tl!` literals complete when counted; its messages are partial; one/other plurals | full |
|
||||
| Russian | `ru` | 4,009 / 4,020 | full |
|
||||
| Ukrainian | `uk` | 8,802 rows, 3,439 of them `@msg` and 48 `@msgplural` (counted 2026-11-13); one/few/many plurals | full |
|
||||
| Hungarian | `hu` | 5,253 rows (counted 2026-10-21): menus, `tl!` literals and messages complete when counted; one plural form | full |
|
||||
| Hungarian | `hu` | 9,166 rows, 3,444 of them `@msg` and 48 `@msgplural` (counted 2026-11-13): the untranslated report lists 40 missing messages for it, and lists 47 menu strings, 25 `tl!` strings, 11 undo labels and 45 swatch names without a row; one plural form | full |
|
||||
| Polish | `pl` | 9,044 rows, 3,439 of them `@msg` and 48 `@msgplural` (counted 2026-11-13): the untranslated report lists 46 missing messages for it, and 47 menu strings, 26 `tl!` literals, 11 undo labels and 45 swatch names; one/few/many plurals | full; native review pending |
|
||||
| Finnish | `fi` | 5,318 rows (counted 2026-10-21): menus, `tl!` literals and messages complete when counted; one/other plurals, 797 `@msg` rows | full; AI-assisted, native proofreading pending |
|
||||
| Czech | `cs` | 9,273 rows, 3,560 of them `@msg` and 48 `@msgplural` (counted 2026-11-13): the untranslated report lists 2 missing Czech messages, and 54 messages that no language has a row for | catalog complete; render-site gaps reduced; native review pending |
|
||||
| Bosnian | `bs` | 5,841 rows (counted 2026-10-30): menus, `tl!` literals and messages complete when counted; one/few/other plurals | full; AI-assisted, native review pending |
|
||||
| Bosnian | `bs` | 6,887 rows, 1,144 of them `@msg` and 47 `@msgplural` (counted 2026-11-14 on `main` at `676f0524cc`): the untranslated report lists 97 missing menu strings, 53 `tl!` literals and 27 undo labels for it; not in `COMPLETE_MESSAGES`, and checked against the same scanned messages it lacks 2,416; one/few/other plurals | full; AI-assisted, native review pending |
|
||||
| Swedish | `sv` | 8,991 rows, 3,106 of them `@msg` and 48 `@msgplural` (counted 2026-11-14): the untranslated report lists 518 missing messages for it, and 12 menu strings, 1 `tl!` literal and 3 undo labels; one/other plurals | full; native review welcome |
|
||||
| Bulgarian | `bg` | 5,245 rows, 763 of them `@msg` (counted 2026-10-21): menus and `tl!` literals complete when counted; its messages are partial | full; AI-drafted, native review pending |
|
||||
| Greek | `el` | 5,251 rows, 795 of them `@msg` (counted 2026-10-21): menus, `tl!` literals and messages complete when counted | full; native review welcome |
|
||||
| Georgian | `ka` | 5,200 rows (counted 2026-10-21): menus, panels, dialogs, plurals (one count-neutral form) and messages, tested complete; reviewed by a native speaker | full |
|
||||
| Turkish | `tr` | 5,558 rows, 880 of them `@msg` (counted 2026-10-28); 6 menu strings and the default swatch names still fall back to English | full |
|
||||
| Indonesian | `id` | 5,531 rows, 788 of them `@msg` (counted 2026-10-28): menus and `tl!` literals complete when counted; its messages are partial; one plural form | full |
|
||||
| Catalan | `ca` | 5,626 rows, 881 of them `@msg` (counted 2026-10-28): menus, `tl!` literals and messages complete when counted; one/other plurals; every `ca-*` locale resolves here | full; AI-drafted, native review welcome |
|
||||
|
||||
Twenty-seven non-English catalogs in all (registry count, 2026-11-06). Illustrator, as its public documentation lists, ships around two dozen
|
||||
|
||||
+138
-33
@@ -1,6 +1,6 @@
|
||||
# VectorCraft MCP server
|
||||
|
||||
> **Last updated:** 2026-11-13 · **Change:** Snap to Point with Smart Guides off draws no Smart Guides labels or lines, #7250; no response-shape change. Previously: Envelopes: a top object's side whose pieces are all one curve split at anchors follows that curve's parameter (#7097); existing response shapes retained.
|
||||
> **Last updated:** 2026-11-14 · **Change:** Pencil continuation, straight-line and closing cursors; scores and estimates unchanged; no response-shape change. Previously: Snap to Point with Smart Guides off draws no Smart Guides labels or lines, #7250; no response-shape change. Previously: Envelopes: a top object's side whose pieces are all one curve split at anchors follows that curve's parameter (#7097); existing response shapes retained.
|
||||
|
||||
`vectorcraft-cli mcp` runs a [Model Context Protocol](https://modelcontextprotocol.io) server on stdio
|
||||
(newline-delimited JSON-RPC 2.0; see [Protocol](#protocol) for version negotiation). Agents use it to
|
||||
@@ -667,7 +667,7 @@ sampler.
|
||||
| `transform` | `{ids?, dx?, dy?, rotate?, scale?, scaleX?, scaleY?, reflect?, shear?, origin?, copy?}` | Runs move, rotate, scale, reflect, shear in that order. `rotate` is in degrees counter-clockwise; a positive `shear` moves the top to the right. With `copy`, the first step duplicates. |
|
||||
| `create_graph` | `{type?, x, y, width, height, csv? \| series?, categories?, rows?}` | The nine Illustrator graph types: column, stacked column, bar, stacked bar, line, area, scatter, pie and radar. An empty CSV cell or a `null` in `rows` is a blank value; a number in straight quotes is a label. Edit later with `graph.setData` / `graph.setType` via `run_command`. `graph.column {design, columnType: vertical\|uniform\|repeating\|sliding, each, fractions: chop\|scale}` draws the columns or bars of the series picked with Group Selection (or `seriesIndexes`, or all of them) with a graph design saved by `graph.design`; with no `design` it returns the series' current design and options. Type in the design that holds a `%` followed by two digits shows each column's value, with at least the first digit's places before the decimal point and the second digit's places after it. |
|
||||
| `text_wrap` | `{ids?, offset?, invert?, release?}` | Area type below the objects (same layer) flows around them. |
|
||||
| `undo` / `redo` | `{}` | Many calls that change nothing record no undo step, for example `object.align` with nothing to move, `object.move` by 0 without `copy` and `object.showAll` with nothing hidden. `undo` (`edit.undo`) after such a call undoes the step before it. `inspect_document` lists the undo steps as `history`. `run_command` with `edit.clearHistory` removes every undo and redo step of the active document and returns `{cleared}`, the number of steps removed; the document stays as it is, and the command records no undo step. `run_command` with `edit.newDocumentFromState` and `{index?, created?}` makes a new document holding the art as it was at that state and makes it the active document, and returns `{index, title}`. `index` is a row of the History panel, with 0 the oldest state kept, and an omitted `index` uses the current state. An `index` that names no state is an error and changes nothing. `created` is File Info's created date in Unix seconds or null, and defaults to now. The new document takes the next `Untitled-N` name, is marked unsaved, has nothing selected and has no steps to undo or redo. It is out of symbol, opacity-mask and pattern editing, and the art drawn in a pattern's tile is stored in the pattern, as `object.pattern.done` stores it. The source document and its steps stay as they are, except that typing or a drag in progress is first kept as a step. When a command keeps a drag whose preview Real-time Drawing off had not applied yet (`edit.undo`, `edit.redo`, `edit.clearHistory`, `edit.newDocumentFromState` and the other commands that end a drag first), and applying that preview gives a warning, the command's result carries it as `previewWarning`, and as `warning` too when the command gives no warning of its own; the app's status bar shows `warning`. While the Type tool edits type, `undo` and `redo` put its caret, with no characters selected, at the end of the text the step changed: after the text it puts back or retypes, or where the text it takes out was. A step that changes no characters, such as a formatting change, leaves the caret and the selection where they are. |
|
||||
| `undo` / `redo` | `{}` | Many calls that change nothing record no undo step, for example `object.align` with nothing to move, `object.move` by 0 without `copy` and `object.showAll` with nothing hidden. `undo` (`edit.undo`) after such a call undoes the step before it. `inspect_document` lists the undo steps as `history`. `run_command` with `edit.clearHistory` removes every undo and redo step of the active document and returns `{cleared}`, the number of steps removed; the document stays as it is, and the command records no undo step. `run_command` with `edit.newDocumentFromState` and `{index?, created?}` makes a new document holding the art as it was at that state and makes it the active document, and returns `{index, title}`. `index` is a row of the History panel, with 0 the oldest state kept, and an omitted or null `index` uses the current state. An `index` that names no state fails with `no history state N`, one that is not a whole number with `` `index` must be a whole number ``, and either changes nothing. `created` is File Info's created date in Unix seconds or null, and defaults to now. The new document takes the next `Untitled-N` name, is marked unsaved, has nothing selected and has no steps to undo or redo. It is out of symbol, opacity-mask and pattern editing, and the art drawn in a pattern's tile is stored in the pattern, as `object.pattern.done` stores it. The source document and its steps stay as they are, except that typing or a drag in progress is first kept as a step. When a command keeps a drag whose preview Real-time Drawing off had not applied yet (`edit.undo`, `edit.redo`, `edit.clearHistory`, `edit.newDocumentFromState` and the other commands that end a drag first), and applying that preview gives a warning, the command's result carries it as `previewWarning`, and as `warning` too when the command gives no warning of its own; the app's status bar shows `warning`. While the Type tool edits type, `undo` and `redo` put its caret, with no characters selected, at the end of the text the step changed: after the text it puts back or retypes, or where the text it takes out was. A step that changes no characters, such as a formatting change, leaves the caret and the selection where they are. |
|
||||
|
||||
For example, create editable Japanese area type with the engine's vertical writing mode:
|
||||
|
||||
@@ -856,7 +856,8 @@ stored without its placement (its vector, aspect ratio, focal point and freeform
|
||||
own box when the graph is drawn again, so `paint.setGradientGeom` and the `paint.freeform.*` edits do not store the
|
||||
placement they set there. A stroke weight and dashes are stored as the label shows them, also on a label that was
|
||||
scaled. When the characters of labels of one kind change differently, the frontmost label sets what the kind keeps. On
|
||||
a pie with Legends in Wedges whose legend labels have no fill of their own, the legend labels' fill is stored only when
|
||||
a pie with Legends in Wedges, a fill a command sets on the legend labels is drawn on every wedge, black included, until
|
||||
that command is undone; a size, font or stroke change does not set one. Before that, their fill is stored only when
|
||||
every legend label the command reaches ends up with the same fill. Otherwise they are drawn again in black, or white on
|
||||
a dark wedge. These commands do not store the colors they give a graph's axis lines, ticks and radar rings, which are
|
||||
drawn again with their default paint.
|
||||
@@ -1085,7 +1086,15 @@ or `range`), named `<file>-<artboard>.<ext>`, and returns `{path, files}` (a PDF
|
||||
SVG writes one file per artboard of a `range`); `useArtboards: false` exports the bounds of the visible art with what
|
||||
its effects paint, the effects of groups, type and images included. `artboard.fitToArt` measures the art the same
|
||||
way. `document.exportPdf {useArtboards: false}` writes that one page as well, and ignores `artboard`, `artboards` and
|
||||
`range`. A PDF of that page, from either command, carries no Preserve Editing data; when Preserve Editing is on (as it
|
||||
`range`. A PDF or `.ai` page of the art's bounds is measured without the non-printing layers that the file leaves out
|
||||
(unless `includeNonPrinting` or `createLayers` keeps them; a `.ai` file keeps layers by default). An HP-GL plot of the
|
||||
art's bounds is measured without what the plot leaves out: non-printing layers, objects at 0% opacity, placed images,
|
||||
gradient meshes whose every point is at 0% opacity, and paths without effects whose fills and strokes paint nothing.
|
||||
An image or a mesh with a Crop Marks effect, or with a Vector Halftone effect that makes dots, is measured.
|
||||
Such objects in the art of a symbol that is not dynamic are left out of its instances too, and an instance whose
|
||||
symbol holds nothing else is left out.
|
||||
A document whose only visible art is left out is refused, and Export As refuses an HP-GL plot of it before the save
|
||||
dialog. A PDF of that page, from either command, carries no Preserve Editing data; when Preserve Editing is on (as it
|
||||
is in VectorCraft Default), the export comes back with a warning that says so. A `.ai` export with
|
||||
`useArtboards: false` writes that one page too, without the native document and without the editing copy for other
|
||||
apps (`editingData`), and always comes back with the warning `Preserve editing was left out: an .ai file of the art's
|
||||
@@ -2771,11 +2780,11 @@ nearest to the pointer.
|
||||
## Global Edit
|
||||
|
||||
Select › Start Global Edit is `select.globalEdit {appearance?, size?, artboards?, includeCanvas?}`. With one path,
|
||||
compound path or symbol instance selected, it finds the objects of the same shape (moved or scaled copies; not rotated
|
||||
ones), among those `select.all` would take and the objects in their groups, and returns `{active: true, count, ids}`,
|
||||
compound path or symbol instance selected, it finds the objects of the same shape (moved, scaled or rotated copies;
|
||||
not reflected ones), among those `select.all` would take and the objects in their groups, and returns `{active: true, count, ids}`,
|
||||
the selected object first (at most 10,000). With a group of such objects selected (nested groups and clipping paths
|
||||
included; not type or images), it finds the groups like it: as many objects, in the same order, each of the same
|
||||
shape, lying the same way relative to each other (the group moved or scaled as a whole). While Global Edit is off,
|
||||
shape, lying the same way relative to each other (the group moved, scaled or rotated as a whole). While Global Edit is off,
|
||||
the command is disabled for any other selection, including a group that holds type, an image or nothing (it is off in
|
||||
the Select menu, the Properties panel's Quick Actions do not show it, and the Control bar does not show its Global Edit
|
||||
Options). `appearance` also asks for
|
||||
@@ -2784,7 +2793,9 @@ the same fill and stroke (for groups, of each object in them), `size` for the sa
|
||||
params come from `select.globalEditOptions` (the Global Edit Options, kept for the session; it returns them with
|
||||
`count`, the objects a start would take now). The selection stays the one object. Until the next `select.globalEdit`
|
||||
(Stop Global Edit, `{active: false}`), what an edit of a selected match changed is given to the other matches, in the
|
||||
same undo step, and nothing else. A changed outline or anchors go to each match in proportion to its size. A changed
|
||||
same undo step, and nothing else. A changed outline or anchors go to each match in proportion to its size, and to a
|
||||
rotated copy turned by its angle: an anchor moved to the right on the selected object moves upward on a copy rotated
|
||||
a quarter turn counter-clockwise. A changed
|
||||
opacity or blending, and each changed setting of a fill or stroke (paint, weight, opacity, blending, effects…), are
|
||||
copied as they are to the match's fill or stroke of the same kind and rank; its other fills and strokes, and their
|
||||
unchanged settings, stay its own (a stroke weight change leaves the fills). A stroke weight set on the selected match
|
||||
@@ -2800,6 +2811,16 @@ nothing. Nothing of it is saved. Before Global Edit starts, while one object tha
|
||||
selected with the Selection tool, the canvas highlights the other objects a start would take with the current Global
|
||||
Edit Options (none while a drag is in progress, or when there are none).
|
||||
|
||||
Rotated copies are edited together as in [Design a modern geometric
|
||||
logo](https://helpx.adobe.com/vn_vi/illustrator/how-to/modern-logo-design.html), where copies of a group rotated
|
||||
around a point are edited at once from one of their objects. These rules for them are VectorCraft's own. A copy's
|
||||
angle is the one that lays each anchor and handle of the selected object on the copy's anchor and handle of the same
|
||||
order, so a square whose anchors were turned a quarter turn is a copy rotated a quarter turn. The copy is the same
|
||||
shape when, laid so, every anchor and handle lies within a millionth of the larger side of the copy's box of its own. A
|
||||
reflected copy is another shape, and so is a copy stretched along one direction. With `size`, a rotated copy has the
|
||||
same size when it is the selected object rotated without scaling: a 30 × 70 pt object and its copy rotated a quarter
|
||||
turn (70 × 30 pt by its box) have the same size.
|
||||
|
||||
`select.globalEditExclude {id}` leaves the match `id` out of the Global Edit, as a Shift-click on a highlighted match
|
||||
(or on an object inside it) with the Selection tool does: it is no longer highlighted, and later edits leave it as it
|
||||
is. It returns `{active, count, ids}`, the objects left in the Global Edit; with fewer than two left, the Global Edit
|
||||
@@ -2924,8 +2945,16 @@ tutorials, `steps` the number of a tutorial's steps, `finished` whether it is fi
|
||||
zero-based indexes of its steps marked done (every step of a finished tutorial). `learn.skills {}` shows the panel on its Skills tab with the list of
|
||||
skills, with no skill and no tutorial open, as the Quick skill guide card and Back to skills do, and answers what
|
||||
`learn.list` answers. `learn.show {tutorial}` shows the panel on its Skills tab with that
|
||||
tutorial's steps → `{skill, tutorial, title, steps: [text]}`. A missing, non-string or unknown `tutorial` is an error
|
||||
and changes nothing.
|
||||
tutorial's steps → `{skill, tutorial, title, steps: [text]}`; choosing a tutorial's row runs it. A missing, non-string
|
||||
or unknown `tutorial` is an error and changes nothing. A click on the For you or Skills tab button runs
|
||||
`learn.tab {tab}` when the panel shows the other tab, and runs no command when the panel already shows that tab.
|
||||
`learn.tab {tab}`, with `tab` set to `forYou` or `skills`, shows the panel on that tab → `{tab, skill, tutorial}`,
|
||||
with null for no skill or no tutorial open; the Skills tab keeps the skill and tutorial it had open. Choosing a skill's row runs
|
||||
`learn.skill {skill}`, which shows the panel on the Skills tab with that skill's tutorials → the skill as `learn.list`
|
||||
lists it. A missing, non-string or unknown `tab` or `skill` is an error and changes nothing. Back runs `learn.back {}`,
|
||||
which shows the panel and goes up one level on the Skills tab, from a tutorial's steps to its skill's tutorials and
|
||||
from a skill's tutorials to the list of skills, and answers what `learn.tab` answers; on the list of skills or the For
|
||||
you tab the view stays as it is.
|
||||
|
||||
Under a tutorial's steps, View more opens the tutorial's practice sample, a small drawing of VectorCraft's own with the
|
||||
art its steps work on, as a new untitled document that becomes the active one; Save asks where to save it. Once the
|
||||
@@ -2952,11 +2981,11 @@ finished and every step marked. The desktop app keeps the progress in its prefer
|
||||
when two windows change it, the one that saves last keeps its progress. The web build keeps it while the page is open.
|
||||
Marking steps by hand, keeping the progress and Reset progress are VectorCraft's own rules.
|
||||
`learn.markStep {tutorial, step, complete?}` runs a step's check box → `{tutorial, step, complete}`: `step` is the
|
||||
zero-based step number, and `complete` marks the step done (`true`, omitted or null) or not done (`false`). A missing
|
||||
`step` or one the tutorial does not have, a `complete` that is not true or false, a tutorial whose sample was not
|
||||
opened, and a finished tutorial are errors. `learn.resetProgress {}` runs Reset progress and answers what `learn.list`
|
||||
answers; open documents, opened samples and the Learn view stay as they are. For both, a missing, non-string or
|
||||
unknown `tutorial` is an error, and an error changes nothing.
|
||||
zero-based step number, and `complete` marks the step done (`true`, omitted or null) or not done (`false`). A missing,
|
||||
non-string or unknown `tutorial`, a missing `step` or one the tutorial does not have, a `complete` that is not true or
|
||||
false, a tutorial whose sample was not opened, and a finished tutorial are errors, and an error changes nothing.
|
||||
`learn.resetProgress {}` runs Reset progress and answers what `learn.list` answers; open documents, opened samples and
|
||||
the Learn view stay as they are.
|
||||
|
||||
The Home screen has a Learn section between Recent Files and the new-file presets, as
|
||||
[the help page](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/homescreen-overview.html)
|
||||
@@ -2973,6 +3002,9 @@ rules.
|
||||
{"name":"invoke_menu","arguments":{"command":"learn.finish","params":{"tutorial":"pen-paths"}}}
|
||||
{"name":"invoke_menu","arguments":{"command":"learn.next","params":{"tutorial":"pen-paths"}}}
|
||||
{"name":"invoke_menu","arguments":{"command":"learn.skills","params":{}}}
|
||||
{"name":"invoke_menu","arguments":{"command":"learn.skill","params":{"skill":"draw"}}}
|
||||
{"name":"invoke_menu","arguments":{"command":"learn.back","params":{}}}
|
||||
{"name":"invoke_menu","arguments":{"command":"learn.tab","params":{"tab":"forYou"}}}
|
||||
{"name":"invoke_menu","arguments":{"command":"learn.resetProgress","params":{}}}
|
||||
```
|
||||
|
||||
@@ -3224,8 +3256,12 @@ already walks Image Trace. Short agent entry points:
|
||||
is rejected with an error. The Pencil and the Paintbrush give Fidelity in screen pixels, 0.01 to 100 px, and send it
|
||||
divided by the zoom (0.0313 to 640) and kept within that range, so a stroke is fitted at the same tolerance on screen
|
||||
at every zoom. A stroke
|
||||
that continues a path (`extend`) closes it when it ends within four times the Fidelity of the path's other end, at
|
||||
least 6 pt and at most 400 pt. The Blob Brush's `path.blob` Fidelity stays in points, 0.01 to 100 pt.
|
||||
that continues a path (`extend`) closes it when `closed` is true: the Pencil and the Paintbrush send it when the
|
||||
stroke ends within Close Paths When Ends Are Within of the path's other end (the cursor shows the closing ring there),
|
||||
a straight Pencil line too, or with Alt held at the release. The stroke's end then joins the other end when it is
|
||||
within four times the Fidelity of it (at least 6 pt and at most 400 pt), and a straight segment closes the path from
|
||||
farther away. Without `closed`, the stroke closes the path when it ends within that four-times-Fidelity distance. The
|
||||
Blob Brush's `path.blob` Fidelity stays in points, 0.01 to 100 pt.
|
||||
- Variables: `variable.list`, `variable.define {name, kind: text|visibility|image|graph}`, `variable.bind {variable, ids?}`,
|
||||
`variable.makeTextDynamic`, `variable.makeVisibilityDynamic`, `variable.makeImageDynamic`, `variable.makeGraphDynamic`
|
||||
(`variable.bind` and `variable.makeTextDynamic` refuse type that already has another text variable and name it),
|
||||
@@ -3269,8 +3305,9 @@ already walks Image Trace. Short agent entry points:
|
||||
byte order that reads a line break (`\n` or `\r`). It is refused when fewer of its units hold a NUL byte (UTF-8 or
|
||||
Windows-1252 text with stray NUL bytes, or UTF-16 text made mostly of other characters, which needs a byte-order
|
||||
mark), when both byte orders read a line break (the text holds U+0A00 or U+0D00), when it has an odd length, and
|
||||
when it isn't valid UTF-16 in that order or holds a NUL character. A file with no line break has no data rows and is
|
||||
refused for that. `csv` and `data` are read as the text they hold.
|
||||
when it isn't valid UTF-16 in that order or holds a NUL character. A file with no line break is read big-endian when
|
||||
more of its two-byte units start with a NUL byte than end with one, and little-endian otherwise; it has no data rows,
|
||||
so the import is refused. `csv` and `data` are read as the text they hold.
|
||||
- Variable libraries: `variable.loadLibrary {path|xml|dataBase64}` (the Variables panel menu's Load Variable
|
||||
Library…) replaces the document's variables and data sets with a variable library's in one undo step. A load, like a
|
||||
`dataset.import`, adds no undo step when it leaves the variables and data sets as they were. The library
|
||||
@@ -3603,7 +3640,7 @@ already walks Image Trace. Short agent entry points:
|
||||
is changed, renamed or deleted. In the app,
|
||||
`ui.imageTracePresetDialog {params?, rename?}` opens the Image Trace panel's Save as New Preset… or Rename… dialog.
|
||||
- Live Paint: `livePaint.make`, `livePaint.merge`, `livePaint.fill {group?, point}`, `livePaint.strokeEdge`,
|
||||
`livePaint.info {group}`, `livePaint.release`, `livePaint.expand`, and `livePaint.gapOptions {ids?, detect?, size?,
|
||||
`livePaint.info {group?|id?}`, `livePaint.release`, `livePaint.expand`, and `livePaint.gapOptions {ids?, detect?, size?,
|
||||
color?, closeGaps?}` (Object › Live Paint › Gap Options). Make gives each covered face the fill of its front-most
|
||||
covering source, including compound paths with shared curved boundaries. Expand keeps those face fills.
|
||||
`livePaint.expand` keeps each face and edge that draws, with all its fill and stroke rows: it is shown, its opacity
|
||||
@@ -3612,6 +3649,13 @@ already walks Image Trace. Short agent entry points:
|
||||
row is hidden is removed. `livePaint.merge` copies the fill and stroke rows, visibility, opacity and blending mode of
|
||||
each face that draws by this rule, and of each edge, to the rebuilt parts, with their gradients kept at their fit on
|
||||
the old outline and without the strokes' pen pressure, tilt, bearing and rotation.
|
||||
`livePaint.info` lists each face's top fill as `fill` and each edge's top stroke and its weight as `stroke` and
|
||||
`width`, and lists every fill and stroke row of each face and edge in `appearance`, bottom first, as
|
||||
`{index, kind, paint, opacity, visible, width?, drawn}`: `index` counts fills and strokes together, `opacity` runs
|
||||
from 0 to 1, and `width` (strokes only) is the weight in points. `drawn` is true when the row draws by the rule
|
||||
above: the part is shown with an opacity above 0, and the row is shown, has paint and has an opacity above 0 (a
|
||||
stroke also a weight above 0). An unpainted top row can sit over a lower row that draws, so `fill`, `stroke` and
|
||||
`width` alone may not describe what the part draws.
|
||||
With `detect: true`, paint stops at the gaps that run
|
||||
from a loose end of a path to the nearest path, up to `size` wide (`small` 3 pt, `medium` 6 pt, `large` 12 pt, or a
|
||||
number of points up to 72); `closeGaps: true` adds an unpainted path across each of them. `color` (the Gap Preview
|
||||
@@ -3646,6 +3690,16 @@ already walks Image Trace. Short agent entry points:
|
||||
a locked artboard, or in isolation mode outside the isolated art. In the app, the tool's cursor shows what a click
|
||||
at the pointer selects under these rules: the arrow with a filled square for a face, with a short line for an edge,
|
||||
and with an x for nothing. It keeps the look it had at the press until the release.
|
||||
A double-click (`pointer_gesture` kind `doubleclick`, after the two clicks' `down` and `up`) on the face a click there
|
||||
picks runs `select.set {ids}` with that face and the faces of its group that a flood from it reaches across edges
|
||||
that are hidden or draw no stroke (an edge that is fully transparent, or whose strokes are each hidden, without
|
||||
paint, 0 pt wide or fully transparent); a stroked edge and a Gap Detection gap stop the flood, and hidden faces are
|
||||
left out. On the edge a click
|
||||
there picks, it runs `select.set {ids}` with that edge and the edges of its group, not hidden, joined to it end to
|
||||
end through edges that draw with the stroke paint it draws with (the paint of an edge's topmost stroke that is
|
||||
shown, with paint, above 0 pt and not fully transparent; none for an edge that draws no stroke). With Shift held it runs `select.toggle {ids}` with the same faces or edges,
|
||||
and where a click selects no face or edge it runs nothing. The same options, locks and isolation rules apply as for
|
||||
a click.
|
||||
The Live Paint Bucket's options (`tool.setOption {tool: "livePaintBucket", values}`; double-clicking the tool opens
|
||||
them, dialog `livePaintBucketOptions`) are `paintFills` (on), `paintStrokes` (off), `cursorSwatchPreview` (on),
|
||||
`highlight` (on), `color` (the
|
||||
@@ -5135,7 +5189,8 @@ The Attributes panel (`window.panel {panel: "attributes"}`, Cmd+F11) reads `attr
|
||||
objects differ) and `recentUrls`. `attributes.set {overprintFill?, overprintStroke?, showCenter?, imageMap?, url?,
|
||||
note?, ids?}` sets them in one undo step; `path.setFillRule {rule: "nonZero"|"evenOdd"}` sets the fill rule of the
|
||||
paths and compound paths, and `path.reverse {reversed?}` makes subpaths run counter-clockwise (true) or clockwise
|
||||
(false). SVG export wraps an object with a URL in `<a xlink:href>`, and SVG import reads `<a href>` links back.
|
||||
(false). When every subpath of a path turns alike, its strokes' width profiles (left and right swapped) and pen
|
||||
pressure, tilt, bearing and rotation turn with it, so the strokes draw as before. SVG export wraps an object with a URL in `<a xlink:href>`, and SVG import reads `<a href>` links back.
|
||||
|
||||
```json
|
||||
{"name":"run_command","arguments":{"command":"attributes.set","params":{"ids":[12],"url":"https://example.com","imageMap":"rectangle"}}}
|
||||
@@ -5430,6 +5485,13 @@ keeps the segment's direction when the smoothed path there turns back by 90° or
|
||||
path, the curve keeps the direction of the part outside the drag. `object.path.smooth` and Simplify keep each end's
|
||||
direction.
|
||||
|
||||
`path.smoothRegion` keeps an anchor as a corner where the path turns by more than 57.5° (an angle inside the corner
|
||||
under 122.5°) at the anchor and also over `radius` and over twice `radius` on either side of it (on a closed path that the drag reaches all the
|
||||
way round, no more than an eighth of its length), so a jag or a bump smaller than `radius` is still smoothed. The stretches on either side of a kept corner are smoothed and refitted on their
|
||||
own, and the corner keeps its place and the directions the path arrives and leaves along, on every call and at any
|
||||
`fidelity`. A call that changes no anchor returns `{ids: [], before: 0, after: 0}` and adds no undo step. The 57.5°
|
||||
threshold is VectorCraft's own value.
|
||||
|
||||
In the desktop app, Object › Path › Smooth, the canvas context menu's Smooth… (listed while the selection holds a
|
||||
path) and the Contextual Task Bar's Smooth (with a path selected whole with the Direct Selection tool) open the
|
||||
slider (`ui.menuDialog {command: "object.path.smooth"}`, dialog `smoothSlider` with field `level`) at the
|
||||
@@ -6321,6 +6383,10 @@ Pen's second anchor at (150, 431), in line with the square's centre.
|
||||
- `highlightAlternateGlyphs` (off by default): Preferences › Type › Highlight Alternate Glyphs. On, the canvas paints
|
||||
pink behind OpenType substitutions (ligatures, contextual forms). Document Setup's Highlight Substituted Glyphs
|
||||
stays separate. Agents set it with `prefs.set`; the desktop canvas reads it on the next paint.
|
||||
- `showCharacterAlternates` (on by default): Preferences › Type › Show Character Alternates. On, the desktop canvas
|
||||
shows the alternate glyphs of the one character selected with a Type tool beside it (see
|
||||
[Alternate glyphs](#alternate-glyphs)). Off, it shows none. It is VectorCraft's own option. `prefs.set` refuses a
|
||||
value that is not a boolean.
|
||||
- `highlightSubstitutedFonts` (on by default): Preferences › Type › Highlight Substituted Fonts. On, the canvas paints
|
||||
pink behind text drawn in a substitute for a missing font, in every open document. Off, no document shows that
|
||||
highlight. `document.setup` ignores this key and adds a `warnings` entry that names `prefs.set` to its reply. A file
|
||||
@@ -6745,7 +6811,10 @@ copies in artboard order); `artboard` wins when both are given. Without either,
|
||||
several artboards selected, they paste a copy on each of those, and the journal records them as `artboards`; a
|
||||
recorded action leaves both out. Art copied from no artboard keeps its place on the first artboard named and its
|
||||
offset to that one on the others. An index the document does not have, a repeated index, a value that is not an index
|
||||
or an empty list fails, and nothing is pasted. Copied artboards come back once, where they were, whichever artboards
|
||||
or an empty list fails, and nothing is pasted. An `artboard` that is not a whole number, null included, fails with
|
||||
`` `artboard` must be a whole number ``, and an `artboards` entry that is not one with
|
||||
`` `artboards` must contain whole numbers ``; both keys are checked when both are given. Copied artboards come back
|
||||
once, where they were, whichever artboards
|
||||
are named. `layer.pasteRemembersLayers {on?}` (a document option, `document.inspect` → `pasteRemembersLayers`)
|
||||
pastes objects back into the layers and sublayers they came from: in the same document while those are still there,
|
||||
else by the names of the layer and the layers around it (the topmost chain that matches the most names, a shown and
|
||||
@@ -6788,9 +6857,15 @@ also move the pattern tiles of the copies when `patterns` is true (default: pref
|
||||
`artboard.duplicate`, `artboard.copy`, `artboard.cut`, `artboard.move` and `artboard.rearrange` take `lockedAndHidden?`
|
||||
(default: prefs `moveLockedWithArtboard`), and with the Artboard tool chosen `edit.copy` and `edit.cut` pass it on. When
|
||||
art goes along, the journal records the value, so a replay under another preference takes the same art.
|
||||
Every artboard command that takes an `index` fails with `no such artboard` when the `index` is not the
|
||||
0-based index of an artboard (past the last one, negative, fractional, a string or null), and the document and the
|
||||
clipboard stay as they were.
|
||||
Every artboard command that takes an `index` fails with `no such artboard` when the `index` is a whole number past
|
||||
the last artboard, with `` `index` must be a whole number `` when it is negative, fractional, a string or another value
|
||||
that is not a whole number, and with `missing index` when it is null, also in a command that picks an artboard when
|
||||
`index` is left out. An `indices` (or a replayed `selectedArtboards`) that is not a list fails with
|
||||
`` `indices` must be a list of artboard indices ``, an empty one with
|
||||
`` `indices` must be a non-empty list of artboard indices ``, one with an entry that is not a whole number with
|
||||
`` `indices` must contain whole numbers ``, each naming its key, and one with a whole number past the last artboard
|
||||
with `no such artboard`. `artboard.align`, `artboard.distribute` and `artboard.distributeSpacing` name `artboard` or
|
||||
`activeArtboard` the same way. The document and the clipboard stay as they were.
|
||||
These artboard commands refuse a string, a number or another value that is not true or false with
|
||||
`` `art` must be true or false ``, naming the key, and leave the document, its undo history and the clipboard as they
|
||||
were: `moveArt`, `scaleArt`, `strokes`, `corners`, `patterns`, `lockedAndHidden` and an artboard's `locked`,
|
||||
@@ -7228,9 +7303,14 @@ the document; so does `object.expand`.
|
||||
Placing a text file (`.txt`) sets it as area type: `file.place {path | name+dataBase64, text?: {characterSet?:
|
||||
"unicode" | "ansi", platform?: "windows" | "mac", removeLineReturns?, removeParagraphReturns?, replaceSpaces?: n}}`
|
||||
(Text Import Options). Unicode reads UTF-8, or UTF-16 with a byte-order mark; ANSI reads Windows-1252 (Mac Roman on
|
||||
`mac`). `removeLineReturns` joins the lines of each block into one paragraph, `removeParagraphReturns` drops blank
|
||||
lines, `replaceSpaces: 3` turns runs of 3 or more spaces into tabs. The frame fills `rect`, the replaced object's
|
||||
bounds, or the artboard less a 36 pt margin.
|
||||
`mac`). Unicode reads a file without a byte-order mark as UTF-16 by the rule `dataset.import` uses: at least half of
|
||||
its two-byte units hold a NUL byte, in the byte order that reads a line break, or for a file with one line, big-endian
|
||||
when more of its units start with a NUL byte than end with one, and little-endian otherwise. Any other file is read as
|
||||
UTF-8, else as the platform's 8-bit set: one with fewer NUL bytes, one with an odd length, one where both byte orders
|
||||
read a line break, and one that isn't valid UTF-16 in that order or holds a NUL character. `removeLineReturns` joins
|
||||
the lines of each block into one paragraph, `removeParagraphReturns` drops blank lines, `replaceSpaces: 3` turns runs
|
||||
of 3 or more spaces into tabs. The frame fills `rect`, the replaced object's bounds, or the artboard less a 36 pt
|
||||
margin.
|
||||
|
||||
```json
|
||||
{"name":"run_command","arguments":{"command":"file.place","params":{"path":"/tmp/notes.txt","text":{"removeLineReturns":true,"removeParagraphReturns":true}}}}
|
||||
@@ -7875,7 +7955,7 @@ instructions is refused with "not an HP-GL file".
|
||||
|
||||
`document.export` (and `export`, and Export As) with format `hpgl` writes a plot file (`.plt`) of the first artboard
|
||||
(or `artboard`) for pen plotters and cutters; `useArtboards: true` writes one file per chosen artboard
|
||||
(`{stem}-{artboard}.plt`), `false` the bounds of the visible art. Each visible path is drawn once along its own line:
|
||||
(`{stem}-{artboard}.plt`), `false` the bounds of the art it plots. Each visible path is drawn once along its own line:
|
||||
a filled shape is its closed outline, also when a stroke gives its color, and a stroked path is its center line, so
|
||||
fills, stroke widths, dashes, brushes and arrowheads are not painted. Type is drawn as its glyph outlines, and a
|
||||
gradient mesh as its outline, also inside a blend (a mesh whose every point is at 0% opacity draws nothing). A
|
||||
@@ -8365,7 +8445,8 @@ undo step. Object › Transform › Scale, the Scale tool and the Transform pane
|
||||
text reflows along it.
|
||||
`text.setPathHandle {id, subpath?, anchor, which: "in"|"out", x, y, independent?}` moves a direction handle of one
|
||||
of its anchors, as `path.setHandle` moves a path's (Direct Selection dragging a handle of the path, #3565), in one
|
||||
undo step.
|
||||
undo step. A call of `text.reshapeArea`, `text.reshapePath` or `text.setPathHandle` that changes nothing (`dx` and
|
||||
`dy` both 0, or a handle moved to where it already is) adds no undo step and keeps redo.
|
||||
|
||||
```json
|
||||
{"name":"run_command","arguments":{"command":"text.reshapeArea","params":{"id":42,"anchors":[[0,2]],"dx":40,"dy":60}}}
|
||||
@@ -8430,7 +8511,10 @@ the end of the path), and `fit`, `fitScale` and `dynamicText` (Block is on) for
|
||||
Given for several area types (`ids`, or a selection of several), `text.areaOptions` changes only the options given on
|
||||
each one: each frame keeps its other options (it used to take the first frame's), and `fitMinPercent` alone changes only
|
||||
the frames that already shrink text to fit. Options that change nothing (the vertical alignment already set, say) add
|
||||
no undo step and keep redo.
|
||||
no undo step and keep redo. The same holds for `text.setText` when no object changes (the text it already has, in one
|
||||
style, every paragraph with the first one's attributes and no ruby), `text.setStyle` when no character, paragraph or
|
||||
graph label style changes, `type.ruby` with the same reading and options again or `remove` where there is no ruby, and
|
||||
`text.fitHeadline` on a first line that already has the tracking it would set.
|
||||
|
||||
Text that doesn't fit is drawn up to the last line that does, so a one-line headline in a frame lower than its line
|
||||
draws nothing. The commands that make type or change what it holds say so in their own reply: `text.create`,
|
||||
@@ -9144,7 +9228,9 @@ send an Alignment or Level change for paragraphs that stay in no list. With no t
|
||||
with an unknown `tab`, `ui.bulletsAndNumbering` is an error.
|
||||
|
||||
Type › Bullets and Numbering › Convert to Text runs `type.convertListToText` on the selected type's paragraphs, or on
|
||||
those the Type tool's selection touches, and that runs `text.convertListToText {ids?, start?, end?}`. The marker of
|
||||
those the Type tool's selection touches, and that runs `text.convertListToText {ids?, start?, end?}`. With the
|
||||
Selection tool, a selected frame of threaded text names every frame of its story in `ids`, locked and hidden frames
|
||||
included, as Apply Bullets and Apply Numbers do. The marker of
|
||||
each list paragraph becomes characters at the start of the paragraph: the bullet, or the number and its period as the
|
||||
paragraph showed it, then a tab. They are set in the marker's font, size and color: the style of the paragraph's first
|
||||
character without the attributes the marker leaves out. The paragraph leaves its list. A paragraph at a list level
|
||||
@@ -9431,6 +9517,15 @@ and a glyph that the character's style does not draw (All Caps, Small Caps or an
|
||||
system). Choosing the glyph a character already draws is not an edit. Character styles do not take `glyphAlternate`:
|
||||
`charStyle.new`, `charStyle.edit` and `charStyle.setAttrs` refuse it.
|
||||
|
||||
On the desktop canvas, a Type tool with exactly one character selected shows up to five of that character's alternates
|
||||
in a row beside it, in the same order and without the glyph the character is drawn with; a character drawn with an
|
||||
alternate gets its default glyph first. A click on a glyph runs the same command as the panel's double-click
|
||||
(`text.setRangeStyle {featureChanges}`, or `text.setGlyphAlternate` for a glyph no feature draws there), as one undo
|
||||
step. When the character has more alternates than the row shows, an arrow at the end of the row opens the Glyphs panel
|
||||
on Alternates for Current Selection. The row has no command of its own: an agent reads the alternates with
|
||||
`text.glyphAlternates` and applies one with the commands above. The `showCharacterAlternates` preference turns the row
|
||||
off.
|
||||
|
||||
```json
|
||||
{"name":"run_command","arguments":{"command":"text.glyphAlternates","params":{"id":7,"start":2}}}
|
||||
{"name":"run_command","arguments":{"command":"text.setGlyphAlternate","params":{"id":7,"start":2,"gid":1043}}}
|
||||
@@ -10655,6 +10750,10 @@ threaded frame, which composes them again at its own widths. Such a paragraph fa
|
||||
frame has no room for its first line, or when the search for its breaks passes VectorCraft's own limits (1,000,000
|
||||
lines tried and 2,000,000 baseline steps for one paragraph, 2,000,000 lines and 4,000,000 steps for all the
|
||||
paragraphs of a frame).
|
||||
Single-line measures each line's room the same way: a line that takes in a taller character is placed again across its
|
||||
new height and broken again in the room there. When that leaves the taller character for the next line, the line is
|
||||
set at its own height where the room there is no narrower, with the words before that character that fit there, and
|
||||
otherwise stays where it was placed.
|
||||
The UI command `type.lineComposer` (Cmd+Alt+Shift+C, in remote mode `press_key {key: "C", mods: {cmd: true, alt: true,
|
||||
shift: true}}` or `invoke_menu`) sets `singleLine` when every paragraph of the selected type (or every paragraph the
|
||||
Type tool's selection touches) uses Every-line, else `everyLine`, and returns the composer it set.
|
||||
@@ -10713,7 +10812,12 @@ and the arrow keys nudge them by the keyboard increment. The active tool lists t
|
||||
(`tool.setOption {}` returns them as `meshPoints: [{id, index}…]`). On gradient meshes a solid fill colour (`paint.setFill`, from the
|
||||
Color panel, Swatches or the Eyedropper) recolours just the picked points, and when every target of
|
||||
`transparency.set` is a gradient mesh with points picked, its `opacity` fades those points instead of the objects
|
||||
(`transparency.info` then shows their opacity, `null` when it differs). Both are one undo step.
|
||||
(`transparency.info` then shows their opacity, `null` when it differs). Both are one undo step, and neither goes to the
|
||||
points while the Appearance panel's active row takes the fill or the opacity. When the first selected object is a
|
||||
gradient mesh with points picked, the Fill proxy, the Color panel, the Color Wheel and `paint.proxies` show its first
|
||||
picked point's color, and `fillMixed` compares the picked points' colors with each other and with the fills of the other
|
||||
selected objects. The Transparency panel shows the picked points' opacity (blank when it differs), and the Control
|
||||
bar shows the first picked point's opacity.
|
||||
|
||||
`object.mesh.movePoints {id, points: [index…], dx, dy}` (or `{items: [{id, points}…], dx, dy}` over several meshes)
|
||||
moves points by (dx, dy), their handles with them; `object.mesh.setPointColor` takes `points` or `items` the same
|
||||
@@ -11842,6 +11946,7 @@ the error text. The interactive fallback applies only to ordinary File > Save, n
|
||||
|
||||
| Date | Change |
|
||||
|---|---|
|
||||
| 2026-11-13 | `path.freehand`: `closed`, when given, decides whether a stroke that continues a path (`extend`) closes it; the Pencil and the Paintbrush send it by Close Paths When Ends Are Within. |
|
||||
| 2026-11-13 | Snap to Point with Smart Guides off draws no Smart Guides labels or lines (#7250). |
|
||||
| 2026-11-13 | Envelopes: a top object's side whose pieces are all one curve split at anchors follows that curve's parameter (#7097). |
|
||||
| 2026-11-11 | Document READ_ONLY_LOCATION for saves (#6146); no response-shape change. |
|
||||
+42
-14
@@ -1,6 +1,6 @@
|
||||
# Parity with Adobe Illustrator
|
||||
|
||||
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-11-14 · **Change:** minor (G5: Weather Icons joins built-in symbol libraries (Sun, Moon, Cloud, Rain, Thunder, Snow); scores and estimates unchanged; previously: a closed Pencil stroke closes with a straight segment; previously: Snap to Point with Smart Guides off draws no Smart Guides labels or lines, #7250; previously: 3D: the seams of Extrude & Bevel, Inflate and Rotate under a white light, and of the faces of Extrude & Bevel (Classic), Revolve (Classic) and Rotate (Classic), went from miter to round joins, so white-light 3D output is expected to differ from the 2026-10-17 comparison at facet corners (not measured: the scenes were not exported again); previously: `.ai` and EPS import: in layers that don't draw as the page, art that differs away from an envelope of type no longer costs it its editable type; it keeps its drawn art where, in the pixels it and its drawn art ink, the layers with it differ from the page more than its own check allows, or past the envelopes' share of the page check, #7141; Character panel: the Set Font Height Reference dropdown shows an icon before each reference, #6304; scores and estimates unchanged; previously: Envelopes: a top object's side whose pieces are all one curve split at anchors follows that curve's parameter, so a top object saved with its sides' curves in pieces draws as its `.ai` drawn art, #7097; scores and estimates unchanged; previously: Graphic Styles list fills a taller panel, #2992; scores and estimates unchanged; previously: PDF import: glyphs in a span with an empty ActualText come in as outlines, #6971; scores and estimates unchanged; previously: library panels' lists fill a taller panel, #2992; scores and estimates unchanged; previously: Swatches list fills a taller panel, #1638; scores and estimates unchanged; previously minor: Object › Rasterize with the Grayscale or Bitmap colour model makes a grayscale image, #6969; scores and estimates unchanged; previously minor: `.ai` and EPS import: type in an envelope with Distort Appearance is also tried mapped from the box of what it paints, miter tips and moved strokes included, after its glyphs grown by half its strokes' weight (#6824; #6617: Swatches panel menu: Show Recent Colors; scores unchanged; previously minor: icon-strip flyouts also resize from the top edge and the canvas-side top corner, keeping the moved top in workspaces (storytold/craft-libs#1094); scores and estimates unchanged; previously: #6865: explicitly requested oversized editing artboard; macOS: the canvas cursor stays after the pointer moves, #6362; scores and estimates unchanged; previously minor: Type tool: kerning at a caret at the start of a line moves the character after it, #5111; scores and estimates unchanged; previously minor: Rulers: the zero point dragged out of the rulers' corner snaps as a drawn point does; previously minor: Live Paint Bucket fills faces crossed in one drag (#6373); previously: #6404: transform-aware Eyedropper character copying; scores and estimates unchanged; previously: Envelopes: with Distort Appearance, type's strokes paint along the bent glyph outlines at their own weight, as users' `.ai` files draw them, which changes how VectorCraft's own envelopes of stroked type draw (#6644; scores and estimates unchanged); previously minor: G5: Energy Beams brush library; bundled content ~44% → ~46%; previously minor: G5: Skill Icons symbol library; bundled content ~42% → ~44%; previously minor: `.ai` and EPS import: an envelope saved in Edit Contents whose mesh lies away from its drawn art by a move opens live on that art (#6570; scores and estimates unchanged); previously minor: ruler double-click adds a guide at the pointer, #5239; G5: Status Effects graphic style library; bundled content ~40% → ~42%; MCP symbol libraries list UI Frames and Map Markers; previously minor: G5: Inventory Icons built-in symbol library; bundled content ~38% → ~40%; previously minor: `.ai` and EPS import: stroked type in an envelope maps from its glyphs grown by half its stroke (#3179; scores and estimates unchanged); previously minor: `.ai` and EPS import: warps of type open as mesh envelopes on their saved grid where VectorCraft's warp doesn't draw as their drawn art (#3179; scores and estimates unchanged); G5: Game Trails brush library; bundled content ~36% → ~38%; previously minor: Edit › Edit Custom Dictionary…: its dialog adds, deletes and changes the custom dictionary's words, #4936; previously minor: `.ai` and EPS import: envelopes of type open live where they draw as their drawn art and the layers with them draw as the page (#3179; scores and estimates unchanged); G5: Game HUD graphic style library; bundled content ~34% → ~36%; previously minor: Line Arrow arrowhead (#5421; scores and estimates unchanged); G5: Map Markers built-in symbol library; bundled content ~32% → ~34%; previously minor: right-click on type: Spelling › Auto Spell Check,Line truncated
|
||||
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-11-14 · **Change:** minor (Pencil continuation, straight-line and closing cursors; scores and estimates unchanged; previously: G5: Weather Icons joins built-in symbol libraries (Sun, Moon, Cloud, Rain, Thunder, Snow); scores and estimates unchanged; previously: a closed Pencil stroke closes with a straight segment; previously: Snap to Point with Smart Guides off draws no Smart Guides labels or lines, #7250; previously: 3D: the seams of Extrude & Bevel, Inflate and Rotate under a white light, and of the faces of Extrude & Bevel (Classic), Revolve (Classic) and Rotate (Classic), went from miter to round joins, so white-light 3D output is expected to differ from the 2026-10-17 comparison at facet corners (not measured: the scenes were not exported again); previously: `.ai` and EPS import: in layers that don't draw as the page, art that differs away from an envelope of type no longer costs it its editable type; it keeps its drawn art where, in the pixels it and its drawn art ink, the layers with it differ from the page more than its own check allows, or past the envelopes' share of the page check, #7141; Character panel: the Set Font Height Reference dropdown shows an icon before each reference, #6304; scores and estimates unchanged; previously: Envelopes: a top object's side whose pieces are all one curve split at anchors follows that curve's parameter, so a top object saved with its sides' curves in pieces draws as its `.ai` drawn art, #7097; scores and estimates unchanged; previously: Graphic Styles list fills a taller panel, #2992; scores and estimates unchanged; previously: PDF import: glyphs in a span with an empty ActualText come in as outlines, #6971; scores and estimates unchanged; previously: library panels' lists fill a taller panel, #2992; scores and estimates unchanged; previously: Swatches list fills a taller panel, #1638; scores and estimates unchanged; previously minor: Object › Rasterize with the Grayscale or Bitmap colour model makes a grayscale image, #6969; scores and estimates unchanged; previously minor: `.ai` and EPS import: type in an envelope with Distort Appearance is also tried mapped from the box of what it paints, miter tips and moved strokes included, after its glyphs grown by half its strokes' weight (#6824; #6617: Swatches panel menu: Show Recent Colors; scores unchanged; previously minor: icon-strip flyouts also resize from the top edge and the canvas-side top corner, keeping the moved top in workspaces (storytold/craft-libs#1094); scores and estimates unchanged; previously: #6865: explicitly requested oversized editing artboard; macOS: the canvas cursor stays after the pointer moves, #6362; scores and estimates unchanged; previously minor: Type tool: kerning at a caret at the start of a line moves the character after it, #5111; scores and estimates unchanged; previously minor: Rulers: the zero point dragged out of the rulers' corner snaps as a drawn point does; previously minor: Live Paint Bucket fills faces crossed in one drag (#6373); previously: #6404: transform-aware Eyedropper character copying; scores and estimates unchanged; previously: Envelopes: with Distort Appearance, type's strokes paint along the bent glyph outlines at their own weight, as users' `.ai` files draw them, which changes how VectorCraft's own envelopes of stroked type draw (#6644; scores and estimates unchanged); previously minor: G5: Energy Beams brush library; bundled content ~44% → ~46%; previously minor: G5: Skill Icons symbol library; bundled content ~42% → ~44%; previously minor: `.ai` and EPS import: an envelope saved in Edit Contents whose mesh lies away from its drawn art by a move opens live on that art (#6570; scores and estimates unchanged); previously minor: ruler double-click adds a guide at the pointer, #5239; G5: Status Effects graphic style library; bundled content ~40% → ~42%; MCP symbol libraries list UI Frames and Map Markers; previously minor: G5: Inventory Icons built-in symbol library; bundled content ~38% → ~40%; previously minor: `.ai` and EPS import: stroked type in an envelope maps from its glyphs grown by half its stroke (#3179; scores and estimates unchanged); previously minor: `.ai` and EPS import: warps of type open as mesh envelopes on their saved grid where VectorCraft's warp doesn't draw as their drawn art (#3179; scores and estimates unchanged); G5: Game Trails brush library; bundled content ~36% → ~38%; previously minor: Edit › Edit Custom Dictionary…: its dialog adds, deletes and changes the custom dictionary's words, #4936; previously minor: `.ai` and EPS import: envelopes of type open live where they draw as their drawn art and the layers with them draw as the page (#3179; scores and estimates unchanged); G5: Game HUD graphic style library; bundled content ~34% → ~36%; previously minor: Line Arrow arrowhead (#5421; scores and estimates unchanged); G5: Map Markers built-in symbol library; Line truncated
|
||||
>
|
||||
> Oversized artboard import update (2026-11-12): Explicit editing-data import retains a single artboard beyond a capped 14,400 pt PDF page (#6865).
|
||||
>
|
||||
@@ -60,6 +60,8 @@ Artboard Options forwards the active Artboard tool's Scale Artwork with Artboard
|
||||
|---|---|---|
|
||||
| 2026-11-14 | minor | G5: Weather Icons joins Basic Shapes, UI Frames, Map Markers, Inventory Icons and Skill Icons as a sixth built-in symbol library (Sun, Moon, Cloud, Rain, Thunder, Snow; original procedural vector symbols generated in code, no default 9-slice); area score and estimate unchanged. |
|
||||
| 2026-11-14 | minor | Pencil and Paintbrush: a closed stroke (Alt at the release, or ending within Close Paths When Ends Are Within of its start) is fitted as the open stroke would be and closed by a straight segment back to its start, instead of curving on past both ends (`pencil_alt_closes_a_stroke_straight_back_to_its_start` in `crates/engine/src/tests/draw2.rs`). Scores and estimates unchanged. |
|
||||
| 2026-11-13 | minor | Pencil cursors: the continuation cursor (a short rising line) shows over an open end of a selected path before any press, freehand too, and while a continuing stroke nears another selected path's open end it connects to; the straight-line cursor is a short level line; a continued path, a straight line too, shows the closing cursor and closes within Close Paths When Ends Are Within of its other end, and with Alt at the release (`a_continued_stroke_shows_where_it_connects_or_closes` in `crates/tools/src/draw2/gesture/tests.rs`, `pencil_extend_closes_as_closed_says` in `crates/engine/src/tests/draw2.rs`). Scores and estimates unchanged. |
|
||||
|
||||
| 2026-11-13 | minor | Snap to Point: with Smart Guides off it still pulls drawn and dragged points onto anchors and ruler guides, but draws none of the Smart Guides labels ("anchor") or lines (#7250; `guides::tests::snap_to_point_without_smart_guides_shows_no_guides`). Scores and estimates unchanged. |
|
||||
| 2026-11-13 | minor | Graphic Styles: in a panel made taller the list fills the space above the footer instead of stopping at 220 pt (#2992; `the_list_fills_a_tall_panel_above_its_footer` in `crates/ui-egui/src/panels/graphic_styles.rs`). Scores and estimates unchanged. |
|
||||
| 2026-11-13 | minor | PDF import: glyphs inside a marked-content span with an empty `ActualText` come in as outlines in their fill and stroke instead of being left out, adding no text (#6971; `empty_actual_text_keeps_the_glyphs_art` in `crates/pdf/src/tests/actual_text.rs`). Scores and estimates unchanged. |
|
||||
@@ -205,11 +207,8 @@ tests and the CI gate. See [Calibration](#calibration).
|
||||
- **From the code (measured, origin/main `01e165af`):**
|
||||
- Menu tree (`crates/ui-egui/src/menus.rs`, laid out in Illustrator's menu order): 348 items bound to
|
||||
commands, 26 stubs (`todo(…)`/`todos(…)`), so 93.0% of menu items do something (348 and 26 after Snap to Glyph shipped in #3124; 348 and 27 after the
|
||||
Revolve merge; 350 and 25, 93.3%, after Graph › Design and Marker; 353 and 22, 94.1%, after Extrude & Bevel, Inflate and Rotate). The stubs: Effect › 3D and Materials › Materials, Effect › SVG Filters, Edit › Spelling (3), Graph › Column, Live Paint
|
||||
Gap Options, Optical Margin Alignment, global and video rulers (2),
|
||||
Window › Arrange (4), SVG Interactivity, Other Script…, Help.
|
||||
Gap Options, Optical Margin Alignment, Start Global Edit, global and video rulers (2),
|
||||
Window › Arrange (4), SVG Interactivity, Other Script…, Help (the Brush and Symbol Libraries placeholders are gone: Window › Symbol Libraries works since 2026-10-23, Window › Brush Libraries since 2026-10-24).
|
||||
Revolve merge; 350 and 25, 93.3%, after Graph › Design and Marker; 353 and 22, 94.1%, after Extrude & Bevel, Inflate and Rotate). The menu stubs on `a47d7eec` are Effect › 3D and Materials › Materials,
|
||||
Edit › Spelling › Check Spelling and Help › VectorCraft Help.
|
||||
- Engine commands: ~710 ids registered with `cmd!` across `crates/engine/src/cmd` (plus macro-generated
|
||||
families), and 85 UI-only commands (`UI_COMMANDS`).
|
||||
- Tools: 91 in `crates/tools/src/catalog.rs`; Touch Type is listed but not implemented, and the Dimension
|
||||
@@ -595,7 +594,8 @@ since 2026-10-01.
|
||||
**Drawing tools, Star inner radius held with Ctrl/Cmd:** While a star is dragged out, Ctrl/Cmd keeps the inner radius the star showed when the key went down, also when the key is pressed with the pointer still. `a_star_drag_holds_its_inner_radius_with_ctrl_and_straightens_with_alt` and `a_star_drag_holds_the_inner_radius_it_shows_when_ctrl_goes_down` cover it, with Alt's straight shoulders and a drag canceled with Escape.
|
||||
**Drawing tools, Dimension tool horizontal and vertical linear dimensions:** A linear dimension between two clicked points or dragged out from a segment is aligned, horizontal or vertical, chosen by where the pointer moves while it is placed, and a click again by the second point gives aligned; `dimension.create` and `dimension.update` take `orientation`, and the dimension stays linked to the anchors it measures, keeps its orientation when it or the art turns, with a line that lay outside the points kept outside them; an unlinked horizontal or vertical dimension that is reflected has its line on the reflected side. `the_pointer_chooses_aligned_horizontal_or_vertical`, `two_points_measure_horizontally_vertically_or_aligned`, `clicking_again_by_the_second_point_places_an_aligned_dimension`, `a_segment_drag_measures_horizontally_vertically_or_aligned`, `points_on_a_vertical_line_measure_aligned`, `horizontal_and_vertical_dimensions_draw_lines_along_their_axis`, `turned_horizontal_dimensions_stay_horizontal`, `a_linked_horizontal_dimension_keeps_its_gap_from_turned_art`, `a_linked_horizontal_dimension_below_or_between_its_points_follows_turned_art`, `a_reflected_horizontal_dimension_keeps_its_line_on_the_reflected_side`, `a_dimension_without_an_orientation_reads_as_aligned`, `dimension_orientation_is_checked` and `a_turned_dimension_keeps_its_line_on_its_side` cover it.
|
||||
**Drawing tools, Dimension tool points that are not anchors follow the art:** A clicked point on a segment stays at its place along the segment, also when the segment curves, and a point off the art is linked to anchors (or, when the anchors lie on one line, anchors and handles) of the path, so both ends of the dimension follow when the art is moved, scaled, turned or reflected, also when the point was placed by a Smart Guide and when the dimension is saved and opened again; a linked linear dimension of reflected art (other than art on one line) has its line on the reflected side; deleting the art, changing its anchor count or whether it is closed, turning an angle's arm into a curve, or making a measured circle or arc no longer circular leaves the dimension where it was, no longer linked, instead of removing it. `a_dimension_to_a_point_on_a_segment_follows_the_art_at_both_ends`, `a_dimension_to_a_point_off_the_art_moves_with_the_art`, `a_dimension_whose_art_changes_its_anchors_stays_where_it_was`, `a_dimension_whose_art_is_opened_stays_where_it_was`, `angle_and_arc_dimensions_whose_art_no_longer_fits_stay_where_they_were`, `a_dimension_that_cannot_be_drawn_again_keeps_its_art`, `a_linked_dimension_of_reflected_art_has_its_line_on_the_reflected_side`, `a_dimension_to_a_point_off_a_line_follows_the_line`, `a_point_off_an_arch_is_reflected_with_the_arch`, `a_point_beside_an_almost_straight_curve_follows_it`, `a_point_off_a_loop_with_its_anchors_in_one_place_follows_it`, `a_point_beside_a_reflected_line_moves_as_a_half_turn_would`, `a_point_on_a_segment_stays_on_it_when_the_segment_curves`, `a_linked_dimension_of_a_reflected_curve_has_its_line_on_the_reflected_side`, `a_dimension_of_art_reflected_across_its_points_changes_sides`, `a_dimension_between_paths_reflected_each_in_its_own_way_keeps_its_offset`, `free_points_survive_a_native_file`, `dimension_free_points_are_checked`, `points_off_anchors_are_held_against_the_path` and `a_point_smart_guides_place_is_held_against_the_path` cover it.
|
||||
**Drawing tools, Dimension tool points on a Smart Guide stay on the guide:** By VectorCraft's own rule, a clicked point that lies on a Smart Guide already, such as a point straight below the first one on the vertical construction guide through it, or one in line with an object's center, stays where the pointer is when no anchor is within 8 pixels and no segment is within the Smart Guides snapping tolerance, instead of moving onto a segment farther than that tolerance and within 8 pixels; with Snap to Grid or Snap to Pixel on, a point stays on the grid or the whole pixel those options give. `a_point_on_a_guide_stays_on_the_guide` covers it.
|
||||
**Drawing tools, Dimension tool points on a Smart Guide stay on the guide:** By VectorCraft's own rule, a clicked point that lies on a Smart Guide already, such as one in line with an object's center, stays where the pointer is when no anchor is within 8 pixels and no segment is within the Smart Guides snapping tolerance, instead of moving onto a segment farther than that tolerance and within 8 pixels; with Snap to Grid or Snap to Pixel on, a point stays on the grid or the whole pixel those options give. `a_point_on_a_guide_stays_on_the_guide` covers it.
|
||||
**Drawing tools, Dimension tool second point without construction guides through a first point off the anchors:** By VectorCraft's own rule, with Smart Guides on, the second Linear point does not snap to the construction guides through a first point that is not on an anchor, so a click beside a segment straight below such a first point lands on the segment; after a first point picked on an anchor, the construction guides through it still apply. The second point still snaps to anchors, centers and alignment lines, and with Snap to Perpendicular or Snap to Tangent on, it lands where the line from the first point meets a segment square or grazes a curve. `a_point_on_a_guide_stays_on_the_guide`, `the_second_point_after_an_anchor_lands_on_construction_guides`, `the_second_point_lands_square_to_a_segment_or_grazing_a_curve` and `linear_picks_show_and_snap_to_smart_guides` cover it.
|
||||
**Drawing tools, Dimension tool dimensions selected with their art keep their lines and label:** Object › Expand, Object › Expand Appearance and Object › Path › Outline Stroke leave a dimension selected with art it measures, directly or in selected groups without fills, strokes or effects of their own, as it is and change only the other art; when the new art no longer fits its link, the dimension stays where it was, no longer linked, and undo links it again. `expand_leaves_a_dimension_selected_with_its_art_as_it_is`, `expand_appearance_leaves_a_dimension_selected_with_its_art_as_it_is`, `outline_stroke_leaves_a_dimension_selected_with_its_art_as_it_is`, `a_dimension_selected_with_art_that_has_nothing_to_expand_changes_nothing`, `a_group_effect_expanded_reaches_the_dimension_it_holds`, `expand_keeps_a_dimension_in_its_asset_and_its_variable_binding`, `a_dimension_keeps_no_link_to_the_art_expand_replaced`, `a_dimension_outlasts_the_art_outline_stroke_or_expand_appearance_replaced`, `a_dimension_outlasts_the_stroke_expand_outlined` and `expand_appearance_in_safe_mode_leaves_a_dimension_selected_with_its_art` cover it.
|
||||
**Live trace result bounds and selection highlights exclude the retained bitmap except in source-image views:** `live_trace_result_bounds_exclude_the_retained_bitmap_at_any_angle` checks every TraceView, geometric and visual bounds and rotated result bounds. `live_trace_selection_highlight_excludes_the_retained_source_rectangle` checks result highlights and the existing ordinary-group policy. Shared editing-child traversal also preserves Shaper handling.
|
||||
**Artboard Options shares existing presets and orientation controls and can fit artwork without moving it; artwork fitting includes all drawn document art across artboards and off-board; artwork bounds are cached by active document and revision, and selection uses the shared bounds cache across artboards:** Shared existing preset definitions are reused; no external preset assets are added. Presets preserve each selected artboard's orientation, and orientation choices apply even when the active board already matches. Fit operations draft bounds until OK, affect only the active artboard and leave artwork in place. Regression coverage checks draft/Cancel, selected-set application, active-only fitting and Undo.
|
||||
@@ -618,6 +618,7 @@ since 2026-10-01.
|
||||
- **Selected Mirror Repeat handles:** a headless canvas regression creates the default mirror repeat and drags its Top bounding-box handle where the axis crosses it; the repeat grows vertically while its width stays fixed. Existing mirror-axis checks cover center movement and end-handle hit priority. The focused UI mirror tests pass. Scores and hours unchanged.
|
||||
- **Transform effect options (#885):** Effect › Distort & Transform › Transform… has visible Transform Objects, Transform Patterns and Scale Strokes & Effects checkboxes (`distort.transform` params `objects`, `patterns`, `strokes`; files without them draw as before). With Transform Objects off the geometry stays and makes no copies; Scale Strokes & Effects scales stroke weights, dashes and the fills' and strokes' effect distances by the mean scale, and Transform Patterns moves pattern tiles, each copy `k` by the transformation `k` times. Such objects draw, export and expand through the same per-copy art, so the canvas and Expand Appearance agree (engine `tests_transformfx`, effects `tests_transformfx`, the dialog test). A Transform effect in a fill's or stroke's own effects applies the same options to that fill or stroke: its weight and dashes and its pattern follow the transformation, and with copies each copy is an object of its own; the canvas, export, Expand Appearance and Use Preview Bounds use the same art (effects `tests_transformfx`). The effects listed after it in that fill's or stroke's list keep their own distances and apply to the transformed art and to each copy, as an object's later effects do after the object's Transform effect: a Drop Shadow after it keeps its offset, an Offset Path after it offsets by its own distance, and an SVG filter after it keeps its scale and the origin of its user space. With Transform Objects off, the effects before it keep their distances too. Before, Scale Strokes & Effects scaled a fill's or stroke's later effects by the mean scale, so existing documents with such effects draw differently. Effects apply in the order they are listed ([Appearance attributes](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-graphic-styles/appearance-attributes-in-illustrator.html)); how the two options treat the effects after a fill's or stroke's own Transform effect is VectorCraft's own rule, following that order (effects `tests::rasterfollow::a_fills_own_transform_leaves_the_shadow_after_it`, `tests::rasterfollow::a_fills_own_transform_leaves_the_offset_after_it`, `tests::rasterfollow::a_fills_own_transform_leaves_the_svg_filter_after_it`, `tests::transformfx::a_fills_own_transform_with_scale_strokes_and_effects_leaves_its_later_effects`; engine `plugins::a_transform_after_a_painted_fill_effect_leaves_the_later_shadow_on_every_paint`). Public reference: [Scale objects](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/scale-objects.html), [How to apply effects](https://helpx.adobe.com/illustrator/using/effects.html), [Distort and transform effects](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/distort-and-transform-effects-in-illustrator.html). Scores and hours unchanged.
|
||||
- **Raster effects before a Transform effect:** effects apply in the order they are listed ([Appearance attributes](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-graphic-styles/appearance-attributes-in-illustrator.html)). A Drop Shadow, glow, blur, Feather or pixel filter listed before a Transform effect in the same list (an object's effects, or a fill's or stroke's own) now follows that Transform effect: its sizes scale by the mean scale, and a Drop Shadow's offset turns, reflects and scales with the art. VectorCraft applies this rule with Scale Strokes & Effects on or off. Before, such an effect was drawn at its own distances around the transformed art. The canvas, export, Expand Appearance, Object › Expand, Outline Stroke and the 3D effects use the same values (effects `tests::rasterfollow`; render `a_transform_after_a_drop_shadow_scales_the_shadow_with_the_art`; engine `objexpand::a_shadow_before_a_transform_expands_as_the_canvas_draws_it`, `outlinestroke::a_shadow_before_a_transform_outlines_as_the_canvas_draws_it`). Not yet: a Transform effect that makes copies or moves at random leaves the raster effects before it as they are; a Rasterize effect before a Transform effect keeps its pixel grid and room around the art; the angles and light directions of pixel filters do not turn or reflect with the art. Scores and hours unchanged.
|
||||
- **Raster effects before a Transform effect that makes copies:** the Transform effect can make copies with its transformation applied ([the help page](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/distort-and-transform-effects-in-illustrator.html)). Giving each copy the raster effects listed before that effect is VectorCraft's own rule. On a path or compound path, each copy now carries the Drop Shadow, glow, blur, Feather or pixel filter listed before the last Transform effect that makes copies, with its sizes scaled by that copy's mean scale and a Drop Shadow's offset turned, reflected and scaled with the copy; a raster effect listed after it paints once around all the copies. Before, one shadow was drawn under all the copies at the object's own distances. The canvas, the object's bounds, export and Expand Appearance draw the same copies, and copies that stop at the effect budget each keep their effects (effects `tests::rasterfollow::each_copy_of_a_transform_effect_carries_the_shadow_listed_before_it`, `tests::rasterfollow::a_shadow_after_a_copying_transform_paints_once_around_the_copies`, `tests::rasterfollow::copies_past_the_budget_each_keep_their_shadow`; render `objectfx::each_copy_of_a_transform_effect_draws_its_own_shadow`; engine `objexpand::each_copys_shadow_expands_as_the_canvas_draws_it`). A Transform effect without copies draws as before. Not yet: the copies of type, images, symbol instances and groups, and a fill's or stroke's own copying Transform effect, still share one set of raster effects, and so does a path with Rasterize, an SVG filter or another effect that is neither a geometry effect nor one of those raster effects before the copying effect. Scores and hours unchanged.
|
||||
- **Raster effects before a Transform effect past the effect budget:** VectorCraft leaves out a Transform effect whose result would pass its geometry budget of 2 million anchors or 8 million lines drawn, and the art stays where it was. The raster effects listed before that Transform effect now stay with the art too: a Drop Shadow keeps its own offset and blur, and the Transform effects after it that fit still move both. Before, the art stayed while the shadow scaled with the Transform effect it did not take. This is VectorCraft's own rule. It applies to a path's own effects and to its fills' and strokes' own, also when the path is in a group whose geometry effects run after its members' own, on the canvas and in its bounds, in export, Expand Appearance, Object › Expand and Outline Stroke, and a hidden shadow keeps its values once shown (effects `tests::rasterfollow::a_transform_past_the_line_budget_moves_the_art_with_its_shadow`, `tests::rasterfollow::only_transforms_that_ran_move_a_preceding_shadow`, `tests::rasterfollow::a_skipped_item_transform_keeps_its_shadow`, `tests::rasterfollow::the_shape_art_of_a_skipped_transform_keeps_its_shadows`, `tests::rasterfollow::a_members_skipped_transform_keeps_its_shadow_under_its_groups_effects`; render `objectfx::a_shadow_before_a_skipped_transform_reaches_as_far_as_it_is_drawn`, `fx::renderer::tests::a_path_paints_from_the_transforms_that_moved_it`; engine `objexpand::a_shadow_before_a_skipped_transform_expands_with_its_own_offset`). Not yet: the shadow of type, an image, a symbol instance or a group whose art a Transform effect leaves in place past the budget still follows that effect. Scores and hours unchanged.
|
||||
- **Raster effects inside an object or group with a Transform effect:** effects applied to a group affect everything in it ([Appearance attributes](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-graphic-styles/appearance-attributes-in-illustrator.html)). How a Transform effect changes the raster effects inside a group or object is VectorCraft's own rule. A group's Transform effect that moves it once now transforms the raster effects of its members, of their fills and strokes, of nested groups and of the art of the linked opacity masks in it, after the members' own Transform effects. A raster effect that a member's own Transform effect with copies or random holds back keeps its value through that effect and still transforms with the group's. VectorCraft applies the same rule to the raster effects of an object's fills and strokes under the object's Transform effect. Sizes scale by the mean scale and a Drop Shadow's offset turns, reflects and scales, with Scale Strokes & Effects on or off. Before, they kept their values, or with Scale Strokes & Effects on scaled by the mean scale with the offset unturned. A group's or object's Transform effect that makes copies or moves at random leaves them as before. The canvas, the redraw region, export, Expand Appearance, Object › Expand and Outline Stroke use the same values (effects `tests::rasterfollow`, `group::tests::a_compound_shapes_transform_turns_its_fills_shadow`; render `a_transform_scales_the_shadows_of_fills_and_members_with_the_art`; engine `objexpand::a_fills_shadow_under_the_objects_transform_expands_as_the_canvas_draws_it`, `objexpand::shadows_under_a_groups_or_an_objects_transform_expand_appearance_as_the_canvas_draws_them`, `outlinestroke::a_strokes_shadow_under_the_objects_transform_outlines_as_the_canvas_draws_it`). Scores and hours unchanged.
|
||||
- **A group's geometry effects after its members' own:** effects applied to a group affect everything in it, and effects apply in the order they are listed ([Appearance attributes](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-graphic-styles/appearance-attributes-in-illustrator.html)). Running a group's effects after its members' own is VectorCraft's own rule. The geometry effects of a group or layer (the effects that reshape outlines, such as Distort & Transform, Offset Path and Warp) now reshape what its members draw: the geometry effects of each visible path and compound path in it and of their fills and strokes, and a nested group's own geometry and Pathfinder effects, run first, at any depth. A symbol instance's own geometry effects run after those of its symbol's members in the same way. Before, the group's effects reshaped the members' outlines and the members' own effects ran afterwards: a 100 pt square with its own 10 pt Offset Path in a group with a 50% Transform drew 70 pt wide, and it now draws 60 pt wide. Existing documents with such groups draw differently. The canvas, export, Expand Appearance and the art that Pathfinder operations and compound shapes take from such a group use the same order (effects `group::tests::a_members_own_offset_runs_before_its_groups_scale`, `group::tests::a_members_own_scale_runs_before_its_groups_offset`, `group::tests::a_member_of_a_plain_nested_group_takes_its_own_effects_first`, `group::tests::a_nested_groups_own_effects_run_before_its_groups`, `group::tests::a_nested_groups_pathfinder_runs_before_its_groups_effects`, `group::tests::a_members_fill_effects_run_before_its_groups`, `group::tests::shape_art_of_a_group_applies_its_members_effects_first`, `group::tests::a_symbol_instances_effects_run_after_its_symbols_members_own`, `group::tests::a_baked_group_applies_its_members_effects_first`, `group::tests::a_baked_group_that_keeps_its_type_applies_its_members_effects_first`, `tests::rasterfollow::a_groups_transform_applies_after_its_members_own`; engine `objexpand::a_groups_effects_after_its_members_own_expand_as_the_canvas_draws_them`). Not yet: the own geometry effects of images, symbol instances, paths with a linked opacity mask or a 3D effect, and nested groups with a 3D effect in the group still run after the group's. Scores and hours unchanged.
|
||||
@@ -646,6 +647,7 @@ since 2026-10-01.
|
||||
- **Global Edit Options in the Control bar:** while Select › Start Global Edit can run, the Control bar shows a Global Edit Options dropdown that opens the same options as the Properties panel's (Match: Appearance, Size; On Artboards; Include Objects On Canvas; Result(s)); both set the same options. The dropdown is off while Global Edit is on; it sits after Recolor Artwork, ahead of the X/Y/W/H fields ([Edit similar objects globally](https://helpx.adobe.com/illustrator/desktop/manage-objects/edit-objects/edit-similar-objects.html)). Regression test: `the_control_bar_shows_the_global_edit_options` in `crates/ui-egui/src/chrome/tests.rs`.
|
||||
- **Global Edit's enabled check on large paths:** the check that decides whether Select › Start Global Edit can run on the selected path, compound path or symbol instance (which the Control bar makes every frame) measures the box of its anchors and handles instead of building and normalizing a copy of every anchor, with the same answer. On a 200,000-anchor path the check takes 0.7 ms instead of 2.2 to 3.0 ms. Regression tests: `support_*` in `crates/engine/src/cmd/globaledit.rs`.
|
||||
- **Start Global Edit is offered only for a group it can start on:** with a group selected, Select › Start Global Edit is disabled, and the Properties panel's Quick Actions and the Control bar do not offer it or its options, when the group holds type, an image or nothing, at any depth; the check walks the group's objects the same way, stopping at the first one Global Edit does not take. This is VectorCraft's own rule. Regression test: `start_global_edit_is_offered_only_for_a_group_of_supported_objects` in `crates/engine/src/tests/globaledit.rs`.
|
||||
- **Global Edit takes rotated copies:** Select › Start Global Edit on an object or group also takes its rotated copies, with the highlights before the start and the options' Results count, and an edit reaches each copy turned by its angle, as copies of a group rotated around a point are edited at once ([Design a modern geometric logo](https://helpx.adobe.com/vn_vi/illustrator/how-to/modern-logo-design.html)). Under VectorCraft's own rules, a copy's angle is the one that lays the selected object's anchors and handles on the copy's in order, each within a millionth of the larger side of the copy's box; a reflected copy is not taken; and with Size, a rotated copy has the same size when it is the object rotated without scaling. Regression tests: `start_global_edit_takes_rotated_copies_*`, `a_rotated_copy_leads_*`, `size_takes_a_rotated_copy_*`, `a_square_whose_anchors_were_turned_*`, `rotated_groups_are_like_the_group_*` and `a_rotated_symbol_instance_*` in `crates/engine/src/tests/globaledit.rs`.
|
||||
- **Control bar's inline X, Y, W and H fields fit the bar:** the Control bar shows the inline X, Y, W and H fields only when all four, their labels as drawn in the current language and the W/H link fit inside the bar's margin; otherwise it shows the Transform link alone. This is VectorCraft's own layout rule. Regression test: `the_control_bar_shows_the_inline_transform_fields_only_when_they_fit` in `crates/ui-egui/src/chrome/tests.rs`.
|
||||
- **Control bar docks to the top or the bottom, or floats:** the Control bar's panel menu, at the bar's right end, has Dock to Top and Dock to Bottom, the edge in use checked and neither while the bar floats. Dragging the bar's gripper and releasing it within 24 points of the top (under the menu bar) or the bottom of the window docks it at that edge, with a band along that edge while it moves; releasing it farther from both edges floats the bar there, with its outline under the pointer while it moves, and a floating bar's gripper moves it or docks it again (`window.control.dock {edge: "top"|"bottom"|"float"}`), as the help page describes ([Control panel overview](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/control-panel-overview.html)). Escape cancels a gripper drag. The 24-point zones, the floating bar's 800-point width and first position, a release outside the window leaving the bar where it was, a window too short for a floating bar docking it at the nearer edge, the floating bar staying inside a window that shrinks, and keeping the edge and the floating position with the workspace, with older workspaces docking the bar at their edge, are VectorCraft's own rules. Regression tests: `the_control_bar_panel_menu_docks_it_to_the_top_or_the_bottom`, `dragging_the_control_bar_gripper_docks_it_at_the_nearer_edge`, `dragging_the_control_bar_gripper_away_from_both_edges_floats_it`, `floating_control_bar_moves_and_redocks_from_each_edge`, `floating_control_bar_menu_docks_to_either_edge`, `control_bar_drag_escape_restores_placement`, `control_bar_drag_release_outside_window_keeps_previous_placement`, `floating_control_bar_stays_reachable_in_tiny_and_resized_windows`, `the_control_bar_dock_command_takes_top_bottom_or_float` and `menus_stop_above_a_control_bar_docked_at_the_bottom` in `crates/ui-egui/src/chrome/tests.rs`, `saved_workspaces_restore_the_control_bar_edge` and `saved_workspaces_restore_floating_control_bar_position` in `crates/ui-egui/src/workspaces.rs`.
|
||||
- **Control bar panel menu turns groups of options on or off:** the Control bar's panel menu lists the bar's groups of options (Snapping, Anchor Points, Tool Options, Object Options, Image Options, Fill and Stroke, Opacity, Graphic Style, Character, Paragraph, Vertical Alignment, Align and Distribute, Transform, Artboard Options and Document Options) above Dock to Top and Dock to Bottom, each checked while it is on; a click turns that group off or on (`window.control.options {group, visible?}`), and a group that is off stays out of the bar even while its tool or object is selected, as the help page describes ([Control panel overview](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/control-panel-overview.html)). The list of groups and what each holds, every group on to start, a group that is off leaving its room to the groups after it, and keeping the groups with the preferences and the workspace are VectorCraft's own rules. Regression tests: `the_control_bar_panel_menu_turns_each_group_on_or_off`, `the_control_bar_keeps_its_label_and_menu_with_every_group_off`, `the_control_bar_panel_menu_scrolls_in_a_short_window`, `the_control_bar_options_command_turns_a_group_on_or_off`, `groups_that_are_off_leave_their_room_to_the_later_groups`, `the_artboard_tool_s_control_bar_follows_its_two_groups` and `the_anchor_points_group_holds_convert_and_anchors` in `crates/ui-egui/src/chrome/tests.rs`, `the_image_options_group_holds_the_image_and_trace_controls` in `crates/ui-egui/src/tests/place.rs`, `the_character_and_paragraph_groups_hold_the_type_controls` in `crates/ui-egui/src/panels/paragraph/tests.rs`, `saved_workspaces_restore_the_control_bar_groups` in `crates/ui-egui/src/workspaces.rs`.
|
||||
@@ -682,6 +684,7 @@ since 2026-10-01.
|
||||
- **OpenType SVG colour fonts:** each glyph's SVG document is read by the SVG importer (registered by the engine) into vector art in the run's colours, then drawn, exported and outlined as COLR glyphs are; PDF real text writes them as text that draws nothing and draws their art where they sit. Measured by `tests_svg_glyphs`, `svg/tests/it/svg_glyphs.rs`, `tests_colourfonts::create_outlines_turns_svg_glyphs_into_groups`, `tests_colourfonts::pdf_real_text_draws_svg_glyphs_as_art_and_keeps_their_characters`. Scores unchanged (estimated).
|
||||
- **Create Outlines keeps the type object's own appearance:** Type › Create Outlines and Object › Expand put the type object's own fills and strokes (the Appearance panel's items around its Characters row) on paths of the whole outline, below or above the glyph paths as that row places them, with one gradient across every glyph, so the outlines draw what the type drew; `object.expand.info` reports those strokes, pattern fills and gradient fills. Outlined characters keep their stroke and fill (the help page, <https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=337>); a type object's appearance is separate from its characters' (the help page, <https://helpx.adobe.com/illustrator/using/appearance-attributes.html>); where the object's items go is VectorCraft's own rule. Measured by `tests::pathops::create_outlines_keeps_the_objects_own_fills_and_strokes`, `tests::objexpand::create_outlines_draws_the_type_objects_own_paint`, `tests::objexpand::type_objects_own_stroke_pattern_and_gradient_are_reported`, `tests::objexpand::type_without_an_outline_reports_no_own_stroke_or_fill`, `tests::objexpand::a_stroke_under_an_unpainted_stroke_is_reported_and_outlined` and `tests::objexpand::expand_keeps_the_type_objects_own_paint`. Scores unchanged (estimated).
|
||||
- **Composite fonts that two documents define differently:** when two open documents each define a composite font (Type › Composite Fonts…) by the same name with different parts, each document draws and exports its type in its own definition: in a tiled or floating window drawn while the front document draws, when it is placed in a document that defines the name differently, and in an export made while another document is in front. Evidence: `tests::composite::nested_loans_of_one_name_use_each_documents_definition` and `threads_lending_one_name_at_once_use_their_own_definitions` (`crates/text`), `tests::fontchange::a_placed_document_draws_its_own_definition_of_a_name_the_page_defines` (`crates/render`). Scores unchanged (estimated).
|
||||
- **Composite fonts only another document defines:** a document draws, measures and exports its type only in the composite fonts it defines itself. Type naming a composite font that only another open document, or the document a placed document sits in, defines is set as in a missing font, also when the document defines no composite font: in a window, a thumbnail or an export of a document in the back, in a file being opened and in a placed document. A temporary document drawn while a document draws keeps that document's composite fonts. Evidence: `tests::composite::a_lent_document_does_not_use_another_documents_composite_font` and `a_document_without_composite_fonts_uses_none_and_a_preview_is_unchanged` (`crates/text`), `tests::fontchange::a_placed_document_draws_its_own_definition_of_a_name_the_page_defines` and `a_document_draws_type_in_another_documents_composite_font_as_missing` (`crates/render`), `a_document_replaced_in_the_back_measures_a_font_it_lacks_as_missing` (`crates/engine`). Scores unchanged (estimated).
|
||||
- **Character-style Auto leading:** capture and explicit style attributes retain Auto as a reset, distinct from omitted leading. Redefine and later numeric updates preserve local leading overrides; the Character Styles marker recognizes Auto correctly. Regression assertions cover partial definitions, Undo/Redo and native save/load serialization. Public references: [Character and paragraph styles](https://helpx.adobe.com/illustrator/using/character-paragraph-styles.html) and [Leading](https://helpx.adobe.com/illustrator/using/line-character-spacing.html).
|
||||
- **Character-style numeric bounds:** `charStyle.new`, `charStyle.edit`, and `charStyle.setAttrs` accept size from 0.1 to 1296 pt, explicit leading from 0.1 to 5000 pt, horizontal and vertical scale from 1% to 10,000%, and baseline shift and Tate-chu-yoko offsets from -1296 to 1296 pt. Out-of-range input leaves the style and Undo history unchanged; Auto leading remains available. These limits match the Character panel controls.
|
||||
- **Character Style Options, General and Basic Character Formats:** the dialog edits a style's name and stored character formats together. Empty fields remain unset, checkboxes show an indeterminate unset state, Basic's Reset Panel clears its explicit settings, and Preview can be canceled without changing history. OK saves one undo step; New Character Style offers the same fields from captured text or the interface language's defaults without a selection. Public reference: [Character and paragraph styles](https://helpx.adobe.com/illustrator/using/character-paragraph-styles.html).
|
||||
@@ -806,6 +809,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
- Export for Screens numbers distinct row files whose names collide, compared without case, as `-2`, `-3`… instead of leaving them out; identical rows still write one file. It puts row folders that differ only in case into one folder (`document.exportForScreens`).
|
||||
- Variables: Import Data Sets… (`dataset.import`) reads tab-separated files as well as comma-separated ones. Every header cell is a variable, and the rows replace the document's data sets as Data Set 1, Data Set 2 and so on. An import error about a row's values gives the file line the row starts on.
|
||||
- Variables: Import Data Sets… (`dataset.import`) reads a UTF-16 file without a byte-order mark, instead of refusing it, when at least half of its two-byte units hold a NUL byte; it uses the byte order that reads its line breaks.
|
||||
- Graphs: the Graph Data window's Import Data reads a UTF-16 text file without a byte-order mark by the same rule as Import Data Sets…, instead of filling the cells with NUL characters. It reads a file cut short by one byte, or with an unpaired surrogate, as it reads one after a byte-order mark.
|
||||
- Variables: Import Data Sets… (`dataset.import`) defines the variables a file's header names that the document lacks, unbound. `#Shown` defines a visibility variable, `@Photo` defines an image variable, and a header without a prefix defines a text variable. A header that is a variable's exact name keeps naming it, and any other `%` header (graph data files) is refused.
|
||||
- Variables: Load Variable Library… in the Variables panel menu (`variable.loadLibrary`) replaces the document's variables and data sets with a variable library's, read from its XML file, in one undo step: every data set is deleted, and every variable is deleted with its bindings and values, except a text variable the library also declares, which stays bound so the library's data sets change its objects (#4136); then the library's other text variables are defined, unbound, and its data sets take the text of each value's `p` elements, one paragraph each. Variables of other kinds are left out with a warning that names their kinds.
|
||||
- Variables: Save Variable Library… in the Variables panel menu (`variable.saveLibrary`) writes the document's text variables and data sets as a variable library's XML file, which Load Variable Library reads back with the same text variables, data set names and text values. Variables of other kinds are left out with a warning that names their kinds.
|
||||
@@ -904,6 +908,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
- Hindi English words (2026-11-13): 264 rows no longer keep English words in their sentences, repeat a parameter's name in Hindi or garble them, among them "unknown align", which now names the alignment; lists of accepted values such as `(left|right|top|bottom)` stay as their English writes them; two tests check every row; native review remains; scores and estimates unchanged.
|
||||
- Message field names and values (2026-11-13): 49 status and error messages in the Hindi, Bulgarian, Danish, Indonesian, Dutch, Brazilian Portuguese, Swedish and Turkish catalogs keep the field names in brackets, such as `[subpath, anchor]`, and the values an `unknown` message lists, such as `(points, lines)`, as their English writes them; a test checks every catalog; scores and estimates unchanged.
|
||||
- Italian messages (2026-11-13): the Italian catalog (`it`) has 1,802 more status and error message rows, and the untranslated report's missing Italian messages go from 1,842 to 40; the translations are VectorCraft's own and await native review; scores and estimates unchanged. See [localization-parity.md](localization-parity.md).
|
||||
- Italian messages no catalog had (2026-11-13): the Italian catalog has 126 more `@msg` rows, 3,560 in all: the image export, color profile, color book, swatch exchange file, DXF and DWG import, 3D and Revolve, script and zip errors that no other catalog translates yet, and the Banner Hems and Grommets, parameter range and recovery save messages that other catalogs translate. The untranslated report lists 54 Italian messages, which open #7116, #7211, #7378 and #7405 translate; scores and estimates unchanged.
|
||||
- Window › Help Bar shows or hides the tool-help strip at the bottom of the window apart from the status bar (`window.helpBar`). Each setting is kept with the UI preferences and in saved workspaces, and Presentation Mode hides both bars. Layouts saved before the setting existed show the Help Bar where they show the status bar (`help_bar_toggle_is_independent_and_saved_in_workspaces`, `help_bar_and_status_bar_render_independently`, `legacy_help_bar_visibility_follows_each_layouts_status_bar`, `a_help_bar_setting_the_file_lacks_is_saved`).
|
||||
- Czech render-site labels: desktop/web file filters, diagnostics, suggested preset names and contributor tooltips/plurals now use catalog lookups; gradients have Czech adjective agreement and printer marks have a separate context (PDF/Print and Summary). Search, Home, toolbar/panel tooltips and Preferences already look up their labels. Every complete catalog has rows for these labels and for the Roman and Japanese printer mark styles. Evidence: `i18n::tests::czech_render_site_follow_up`, `i18n::tests::complete_catalogs_translate_render_site_labels`, `dialogs::tests_modal::printer_mark_labels_are_distinct_from_language_names`; see [localization-parity.md](localization-parity.md).
|
||||
- The Czech catalog (`crates/ui-egui/src/i18n/cs.tsv`) translates 114 status and error messages that no catalog had a row for: the 3D and Revolve limits, image export and encoding errors, color profiles, color books and swatch exchange files, binary DXF and DWG import, path operations, swatch, graphic style and action set libraries, and zip, script and regular expression errors. The untranslated report (`untranslated_report`) still lists 54 messages for every language: the 53 composite font, SVG filter, read root and graph design errors that open #7211, #7378 and #7405 translate, and `` `index` must be a whole number ``. See [localization-parity.md](localization-parity.md).
|
||||
@@ -911,8 +916,10 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
- The Polish catalog (`crates/ui-egui/src/i18n/pl.tsv`) has an `@msg` row for the status and error messages the untranslated report (`untranslated_report`) finds in the sources, 3,439 `@msg` rows in all: the errors of commands, scripts, file import and export and plug-ins. The report lists 46 Polish messages: 44 that open #7211, #7214, #7116, #7330 and #1931 translate, and 2 that no language has a row for. A message with two placeholders in a row (`Template::parse` in `crates/ui-egui/src/i18n/catalog.rs`) is still shown in English.
|
||||
- The status bar translates the limits a plug-in run can exceed (its instruction, time and memory budgets and its output size) and the error of a plug-in removal that leaves the plug-in's grant in the plug-in store, in every language that translates every message. The untranslated-strings report also lists messages that an error or a status takes from a `&str` constant (`plugin_limit_errors_are_translated`, `message_scan_reads_messages_held_in_constants`).
|
||||
- The status bar translates the plug-in host's other errors (manifest, module and run checks, the output an importer, exporter or effect returns, and the approval a plug-in's permissions need) in every language that translates every message. A JSON object or array inside a message stays as written, and a message that wraps another one, such as `plug-in manifest: {0}`, is matched by its own row before a row that starts with a placeholder. The reasons inside these errors (what is wrong with a parameter's spec or dialog keys, the value a parameter needs, what is wrong with an object, stroke, paint or effect in a plug-in's output) are translated with them, and the untranslated-strings report lists the reasons the plug-in host's error helpers take (`plugin_messages_are_translated_in_every_complete_catalog`, `plugin_errors_translate_with_their_values`, `plugin_error_reasons_are_translated_with_the_error`, `message_scan_reads_plugin_helpers`, `templates_that_start_with_text_match_first`).
|
||||
- The Japanese catalog (`crates/ui-egui/src/i18n/ja.tsv`) has 3,421 `@msg` rows: a row for each status and error message the untranslated report (`untranslated_report`) finds in the sources, except 38. The report lists those 38 for Japanese: the 36 composite font errors that open #7211 translates, `select a path` (open #7214) and the justification order error (open #7116). The status bar does not use the rows for ``unknown parameter `{within}{key}`; {why}`` and `{name} must be {lo}–{hi}{unit} (got {v})`, because a message with two placeholders in a row cannot be matched (`Template::parse` in `crates/ui-egui/src/i18n/catalog.rs`). The row for `{k} has control characters{_1}` does not match the File Info error for a multi-line field, where the last placeholder is empty. A native speaker has not reviewed the wording.
|
||||
- A status or error message whose braces are literal, such as a plug-in's `expected {"objects": [...]}` or a command's `quotes must be {double?, single?}`, is translated only when the whole message matches its row: the row writes those braces doubled and has no placeholder, so it no longer replaces a different message that starts with the same words, such as a JSON reason `expected value at line 1 column 1`, which stays in English. A row without placeholders is found at any message length (`plain_message_keys_double_their_braces`, `literal_brace_rows_match_only_their_message`).
|
||||
- The status bar translates the errors a script's `File` and `Folder` objects, `vc.run`, `$.evalFile`, the `$` object's properties and functions, `alert`, `confirm` and `prompt`, `vc.document` and `vc.log` raise, the limits a run can pass, and the errors of Drop Script Engine, and the line for a run that fails (a syntax error, a thrown error, a limit, a stop or an internal error, with the script's name, the line and column, the included file it is in and the files left written), in every language that translates every message. The script's name, paths, numbers, command ids and the text a script throws itself are shown as they are. A failure with no line and column, such as an error in code `eval` compiled, is shown with one colon after the script's name (`an_error_without_a_place_names_the_script_and_kind`). A message template that names a value twice matches only when both places hold the same text, so the line for a failed run is not taken for the message inside it (`a_repeated_placeholder_matches_the_same_text`). The untranslated-strings report also lists the messages the script host's `fail`, `value` and `over` helpers take and the errors the script interpreter throws, and a constant's text comes from the file or crate that declares it, so the Scripts menu's headers are not listed as messages (`script_errors_are_translated`, `script_host_errors_are_translated`, `message_scan_reads_script_interpreter_errors`, `message_scan_reads_constants_of_the_file_and_its_crate`, `message_scan_skips_test_modules_with_any_test_cfg`).
|
||||
- The Hungarian catalog (`crates/ui-egui/src/i18n/hu.tsv`) has an `@msg` row for the status and error messages the untranslated report (`untranslated_report`) finds in the sources, 3,444 `@msg` rows in all: the errors of commands, scripts, file import and export and plug-ins. The report lists 40 Hungarian messages: the composite font, justification order and connect end errors that open #7211, #7116 and #7330 translate, and two messages that no catalog has a row for. The status bar does not use the rows for ``unknown parameter `{within}{key}`; {why}`` and `{name} must be {lo}–{hi}{unit} (got {v})`, because a message with two placeholders in a row cannot be matched (`Template::parse` in `crates/ui-egui/src/i18n/catalog.rs`). The row for `{k} has control characters{_1}` does not match the File Info error for a multi-line field, where the last placeholder is empty. A native speaker has not reviewed the wording.
|
||||
- The Dutch catalog (`crates/ui-egui/src/i18n/nl.tsv`) has an `@msg` row for the status and error messages the untranslated report (`untranslated_report`) finds in the sources, 3,447 `@msg` rows in all. The report lists 41 Dutch messages: the composite font errors, the justification spacing error and the `connect` end error, which open #7211, #7116 and #7330 translate, and three unknown-parameter and range errors (``unknown parameter `{within}{key}`; {why}``, ``unknown parameter `{within}settings.{format}`; {why}`` and `{name} must be {lo}–{hi}{unit} (got {v})`), which open #7353 rewrites so that a catalog row can match them. The row for `{k} has control characters{_1}` does not match the File Info error for a multi-line field, where the last placeholder is empty. A native speaker has not reviewed the wording.
|
||||
- The Traditional Chinese catalog (`crates/ui-egui/src/i18n/zh-hant.tsv`) has an `@msg` row for the status and error messages the untranslated report (`untranslated_report`) finds in the sources, 3,438 `@msg` rows in all: the errors of commands, scripts, file import and export and plug-ins. The report lists 40 Traditional Chinese messages: open #7211, #7116 and #7330 add the rows for 38 of them, and the other 2 have no row in any catalog. A message with two placeholders in a row (`Template::parse` in `crates/ui-egui/src/i18n/catalog.rs`) is still shown in English.
|
||||
- Localised UI: menus (in-window and native), panels, dialogs, toolbar and Preferences read from per-language catalogs (`crates/ui-egui/src/i18n`, see `docs/development.md`); Traditional Chinese (Taiwan), Simplified Chinese (mainland), Japanese, Korean, Vietnamese, German, Spanish, French, Italian, Polish, Brazilian Portuguese, Russian, Ukrainian, Georgian and Catalan ship complete, and Czech covers every menu label (and more), with system-locale detection on macOS, Windows, Linux and the web (the browser's languages, or `?lang=`), a Language preference and, on macOS, a VectorCraft ▸ Language menu. Names are never translated (fonts and their styles, layers, artboards, saved presets, user libraries, custom workspaces, recent files, plug-ins).
|
||||
@@ -925,6 +932,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
- The History panel translates the undo step names the engine, the tools and the shell write as literals: the untranslated report (`untranslated_report`) lists any a complete catalog lacks, and a step whose catalog row exists only with an ellipsis (such as an effect's menu name) shows that row without the ellipsis.
|
||||
- The German catalog (`crates/ui-egui/src/i18n/de.tsv`) has an `@msg` row for the status and error messages the untranslated report (`untranslated_report`) finds in the sources, 3,563 `@msg` rows in all: the errors of commands, scripts, file import and export and plug-ins, including the image export, color profile, color book, swatch exchange file, DXF import and Revolve errors that no other catalog translates yet. The report lists 52 German messages: the composite font and SVG filter errors that open #7211 and #7378 translate, and the justification order error that open #7116 translates. A message with two placeholders in a row (`Template::parse` in `crates/ui-egui/src/i18n/catalog.rs`) is still shown in English.
|
||||
- The Korean catalog (`crates/ui-egui/src/i18n/ko.tsv`) has an `@msg` row for the status and error messages the untranslated report (`untranslated_report`) finds in the sources, 3,438 `@msg` rows in all: the errors of commands, scripts, file import and export and plug-ins. The report lists 39 Korean messages; they are the composite font, select-a-path, justification order and `path.freehand` connect errors that open #7211, #7214, #7116 and #7330 translate. A message with two placeholders in a row (`Template::parse` in `crates/ui-egui/src/i18n/catalog.rs`) is still shown in English.
|
||||
- The Vietnamese catalog (`crates/ui-egui/src/i18n/vi.tsv`) has an `@msg` row for 115 of the status and error messages that the untranslated report listed for every complete-message catalog, among them the image export, color profile, color book, swatch exchange file, swatch library, DXF and DWG import, 3D and Revolve errors and the `index` whole-number error, 1,750 `@msg` rows in all. The untranslated report (`untranslated_report`) lists 1,875 Vietnamese messages without a row; open #7211, #7378, #7405 and #7434 translate 53 of them.
|
||||
- The Swedish catalog (`crates/ui-egui/src/i18n/sv.tsv`) translates status and error messages, among them the image export, color profile, color book, swatch exchange file, DXF import, 3D and Revolve errors and the `index` check of `document.activate`, 3,106 `@msg` rows in all. The untranslated report (`untranslated_report`) lists 518 Swedish messages, 54 of them messages that no catalog translates yet.
|
||||
- The History panel menu has Step Backward and Step Forward, which run Edit › Undo and Edit › Redo and are disabled when there is no step to undo or redo, and Set History Limit…, which opens Preferences at Performance, where History States is set.
|
||||
- The History panel menu's Clear History (`edit.clearHistory`) removes every step to undo and to redo and leaves the document as it is; it is not an undo step itself, and it is disabled when there is no step to clear.
|
||||
@@ -938,7 +946,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
- Perspective Distort and Free Distort (`object.distort`) turn each warped object's bounding box as the warp turns the object at its own center, the objects inside groups, compound paths and clip groups and the art of linked opacity masks included, so the next Selection or Free Transform drag uses the tilted box; Object › Transform › Reset Bounding Box squares it again, and corners left where they are add no undo step (VectorCraft's own rule; `bboxrotate::distort_turns_an_upright_box_with_the_warp_at_its_center`, `distort_turns_each_member_and_linked_mask_by_its_own_warp`, `mirrored_and_collapsing_distorts_keep_valid_angles`, `distort_angles_undo_redo_and_reopen_together`, `xform::unchanged_distort_records_no_history`).
|
||||
- The Free Transform widget's Constrain works in Free Distort as well as in Free Transform ([the help page](https://helpx.adobe.com/illustrator/using/tool-techniques/free-transform-tool.html)). With Constrain on, or Shift held, a corner dragged in Free Distort moves only along the line through the opposite corner, in the box's own proportions, and the other three corners stay in place; on a turned box the line runs through the box's own corners. The line is VectorCraft's own rule. Cmd/Ctrl+Alt+Shift on a corner still drags in Perspective Distort, where Constrain stays unavailable (tools `xform::free::tests::free_distort_corner_keeps_to_its_diagonal_with_shift_or_constrain`, `shift_pressed_during_a_free_distort_drag_constrains_it`, `a_turned_box_is_constrained_along_its_own_diagonal`, `along_diagonal_of_a_degenerate_box`; engine `xform::free_transform_constrained_distort_keeps_the_corner_on_its_diagonal`; ui-egui `free_transform::tests::the_widget_sets_the_mode_and_a_corner_drag_then_distorts`).
|
||||
- Native macOS menu bar, vector tool cursors, a ⌘K command palette, middle-button panning with any tool. Native menus explicitly end tracking on command selection, outside window presses and Escape; menu updates wait until tracking ends, and a dismissing press never starts a canvas gesture (M14.8).
|
||||
- The Learn panel (Window › Learn, or Explore tutorials beside the search icon on the app bar) has a For you tab with a Get started section and a Quick skill guide card, and a Skills tab that lists VectorCraft's own skills with their progress rings and counts of tutorials finished; a skill lists its tutorials, a tutorial shows its numbered steps, and Back goes up a level; `learn.list` and `learn.show {tutorial}` script it ([the help page](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/learn-skills-quick-skill-guide.html); `panels::learn::tests`).
|
||||
- The Learn panel (Window › Learn, or Explore tutorials beside the search icon on the app bar) has a For you tab with a Get started section and a Quick skill guide card, and a Skills tab that lists VectorCraft's own skills with their progress rings and counts of tutorials finished; a skill lists its tutorials, a tutorial shows its numbered steps, and Back goes up a level; `learn.list`, `learn.tab {tab}`, `learn.skill {skill}`, `learn.show {tutorial}` and `learn.back` script it, and the tab buttons, the rows and Back run them ([the help page](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/learn-skills-quick-skill-guide.html); `panels::learn::tests`).
|
||||
- A tool's name in a Learn tutorial step is a blue link that shows where the tool is without choosing it (`learn.locateTool {tool}`): its toolbar button is marked, a collapsed group's flyout opens with the tool's row marked, a torn-off strip comes to the front, and a tool no shown toolbar holds is marked in the All Tools drawer. The mark, its 3 seconds and the hidden-toolbar cases are VectorCraft's own rules ([the help page](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/learn-skills-quick-skill-guide.html); `panels::learn::tests`, the `a_learn_link_*` tests in `toolbar::tests`).
|
||||
- Under a tutorial's steps, View more opens the tutorial's own practice sample as a new untitled document, and once the tutorial is finished, Next Up moves to the next tutorial in the same skill, as the help page describes ([the help page](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/learn-skills-quick-skill-guide.html)). The samples are VectorCraft's own drawings. A Finish tutorial button that shows once the sample is open, the untitled copy, Back to skills in place of Next Up after a skill's last tutorial, and Next Up showing the next tutorial without opening its sample are VectorCraft's own rules. `learn.openSample`, `learn.finish`, `learn.next` and `learn.skills` (Back to skills) script them. Not done: the help page's short video. Regression tests: `view_more_opens_the_tutorial_s_sample_as_a_new_untitled_document`, `finishing_a_tutorial_offers_next_up_in_its_skill`, `the_practice_controls_work_from_the_keyboard`, `the_last_tutorial_of_a_skill_offers_back_to_skills`, `learn_finish_and_learn_next_follow_the_practice`, `learn_skills_shows_the_list_of_skills`, `the_practice_commands_reject_a_missing_or_unknown_tutorial`, `every_tutorial_has_its_own_readable_sample` and `the_next_tutorial_is_the_next_one_in_the_same_skill` in `crates/ui-egui/src/panels/learn/tests.rs`.
|
||||
- A Learn tutorial's steps are marked complete as the learner works, and a skill's progress ring fills as its tutorials are finished, as the help page describes ([the help page](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/learn-skills-quick-skill-guide.html)). Each step has a check box that marks it done once the tutorial's sample is open (`learn.markStep`); Finish tutorial marks every step done; a skill's count shows its tutorials finished of all, and a finished tutorial has a check mark in its skill's list. Marking steps by hand, the count, keeping the progress in the preferences (the web build keeps it while the page is open) and Reset progress (`learn.resetProgress`) are VectorCraft's own rules; `learn.list` reports the progress. Regression tests: `a_step_s_check_box_marks_only_that_step`, `a_step_s_check_box_works_from_the_keyboard`, `finishing_tutorials_fills_their_skill_s_ring_and_count`, `a_skill_with_no_tutorials_shows_0_of_0`, `learn_mark_step_checks_its_params`, `reset_progress_clears_only_the_progress`, `the_preferences_keep_the_progress` and `saved_progress_is_read_leniently` in `crates/ui-egui/src/panels/learn/tests.rs`.
|
||||
@@ -968,6 +976,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
- **9-slice guides on the canvas** ([public source](https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/maintain-proportions-while-scaling-symbols.html)): while a symbol with Enable Guides for 9-Slice Scaling on is edited in symbol editing mode, the canvas draws its two horizontal and two vertical guides as dotted lines across its art, with any tool and with ruler guides hidden. With the Selection tool the pointer near a guide shows the Move cursor, and dragging the guide moves it (`symbol.options`'s `nineSliceGuides`) as one undo step; Escape during the drag puts it back. VectorCraft's own rules: a guide within 4 screen pixels takes the press before the art and the bounding box; it may pass the art's edges (see the next entry) and stops short of the opposite guide; the drag does not snap. Tests: `nineslice::tests`, `symbol_nine_slice::tests::the_edited_symbols_guides_cross_its_art_where_the_editing_layer_shows_it`, `a_moved_guide_passes_the_arts_edges_and_stops_short_of_the_opposite_guide`, `canvas::tests::the_edited_symbols_nine_slice_guides_are_drawn_and_dragged_on_the_canvas`.
|
||||
- **9-slice guides outside the art** ([the help page](https://help.adobe.com/archive/en/illustrator/cs6/illustrator_reference.pdf), Use 9-slice scaling section): a guide may lie outside the symbol's art, set by dragging it past the art's edge in symbol editing mode, by `symbol.options`'s `nineSliceGuides` or by a Symbol Options field below 0% or above 100%, and a scaled instance still scales, by the cells its art falls in. VectorCraft's own rules: each guide lies within 16 times the art's width or height of its edge (`-16..16` as a fraction, `-1600..1600` in percent) and the two guides of an axis keep their order; a guide past an edge of the art cuts the art at that edge, so the outer cell on its side holds no art; with both guides of an axis past opposite edges the art scales as a whole along it; with both past the same edge the art lies in the outer cell at the other edge and keeps its size, from that edge of the instance, or shrinks to the instance's width or height when the instance is smaller than the art; Symbol Options shows and keeps the guides unrounded. Native files keep the guides exactly; SVG and `.ai` write such an instance as its placed art and keep no guides. Tests: `symbol_nine_slice::tests::guides_outside_the_art_are_accepted_in_order_and_within_the_limit`, `art_scales_by_the_cells_it_falls_in_when_guides_lie_outside_it`, `the_map_with_guides_outside_the_art_is_continuous_and_monotone` in `crates/doc`, `guides_outside_the_art_are_set_by_command_and_scale_by_the_cells_that_hold_art`, `a_guide_dragged_past_the_arts_edge_lies_outside_it`, `guides_outside_the_art_survive_saving_and_reopening_a_native_file` in `crates/engine`, `nineslice::tests::a_guide_outside_the_art_is_taken_and_dragged_past_the_arts_edge`, `a_nine_slice_instance_with_a_guide_outside_its_art_is_written_as_drawn` (SVG and `.ai`).
|
||||
- **Delete Symbol asks first** ([Symbols panel](https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/symbols-panel-options.html), [symbol libraries](https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/create-or-import-symbol-libraries.html), [Alt-click Delete](https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html)): the Symbols panel's Delete Symbol button and menu item ask "Delete the selected symbol?" with Yes and No for a symbol no instance uses. For a symbol with placed instances they ask with Expand Instances (the instances become ordinary art), Delete Instances and Cancel; either Instances button deletes the symbol in one undo step. Alt-click on the button deletes an unused symbol without asking and still asks about one with instances. A question left open while another document became active deletes nothing. `symbol.delete` itself does not ask. Tests: `panels::symbols::tests::delete_symbol_asks_first_and_alt_click_deletes_an_unused_symbol_at_once`, `the_in_use_question_expands_or_deletes_the_instances`, `a_stale_delete_symbol_question_deletes_nothing`, `the_delete_symbol_questions_show_their_buttons`.
|
||||
- **Symbols panel context menu** ([Symbols panel](https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/symbols-panel-options.html)): right-clicking a symbol in thumbnail view or list view displays a context menu with Place Symbol Instance (passes view center or artboard center), Edit Symbol, Duplicate Symbol, Delete Symbol, Break Link to Symbol (enabled when canvas selection includes instances of this symbol), and Select All Instances. Right-clicking an unselected symbol selects it first (`symbol.setCurrent`). Tests: `panels::symbols::tests::right_click_context_menu_in_symbols_panel_runs_actions`.
|
||||
- **Symbols › Select All Unused** ([Symbols panel](https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/symbols-panel-options.html), #4918): the Symbols panel menu's Select All Unused shows the symbols nothing places selected (`symbol.unused`): instances in the art (opacity masks included), graph designs, pattern tiles and brush art count, and so do instances in a used symbol's art. Delete Symbol, the button or the menu item, then asks "Delete the selected symbols?" once and deletes those still unused in one undo step (`symbol.delete {names}`); Alt-click on the button deletes them without asking, and a click on a symbol picks just it again. Tests: `tests::brushsym::symbol_unused_lists_the_symbols_nothing_places_and_delete_takes_several`, `panels::symbols::tests::select_all_unused_picks_the_unused_symbols_and_delete_deletes_them`, `dialogs::symbol_delete::tests::several_symbols_get_the_plural_question`.
|
||||
- **Symbols › Sort by Name and the list views** ([the help page](https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/symbols-panel-options.html)): the Symbols panel menu's Sort by Name puts the symbols in alphabetical order (`symbol.sortByName`), and its Thumbnail View, Small List View and Large List View show them as thumbnails, in a compact list or in a list with larger thumbnails. VectorCraft's own rules: the sort ignores case and keeps names that differ only in case in their order; it changes the document's order, which `symbol.list` reports, as one undo step, keeps the current symbol and adds no undo step when the symbols are already in order; Thumbnail View is the default, Small List View has 18-point rows with 14-point thumbnails and Large List View 26-point rows with 22-point thumbnails, and a click or double-click on a symbol does the same in every view. Tests: `tests::brushsym::symbol_sort_by_name_orders_the_symbols_in_one_undo_step`, `panels::symbols::tests::sort_by_name_and_the_small_and_large_list_views`.
|
||||
- **Expand of symbol instances:** Object › Expand turns selected symbol instances (without effects, not in perspective, in groups or placed documents too) into their art as Break Link to Symbol places it, one level deep, as one undo step; the Expand dialog's Fill and Stroke reach that art (`object.expand`, `crates/engine/src/tests/expand_symbols.rs`; estimated, score unchanged).
|
||||
@@ -1022,9 +1031,11 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
- Cmd/Ctrl+A follows the keyboard: in a panel, dialog or search field it selects the field's text, while the Type tool edits it selects all of that text (also `select.all` over MCP), and only otherwise every object. On macOS the menu bar's Select All, Cut, Copy and Paste (keys or clicks) act on a focused field too, and elsewhere the in-window menus' do: the field that had the keyboard when the menu opened gets them, with its selection, and the keyboard back (#516). Not yet: Select All across threaded frames (one frame's text is selected).
|
||||
- Cmd/Ctrl+A follows the keyboard: in a panel, dialog or search field it selects the field's text, while the Type tool edits it selects all of that text (also `select.all` over MCP), and only otherwise every object. On macOS the menu bar's Select All, Cut, Copy and Paste (keys or clicks) act on a focused field too, and elsewhere the in-window menus' do: the field that had the keyboard when the menu opened gets them, with its selection, and the keyboard back (#516). In a frame of threaded text, Select All selects the whole story, highlighted in every frame: Copy and Cut take all of it, typing or Delete replaces it as one undo step, and a fill, a size step or a Character or Paragraph panel change applies to every frame's text (VectorCraft's own behavior; `textedit::select_all_in_a_threaded_frame_selects_the_whole_story`, `textedit::typing_over_the_whole_story_replaces_every_frames_text_in_one_step`).
|
||||
- With the whole story of threaded text selected by Select All, Remove Line Breaks, Remove Paragraph Breaks and Type › Bullets and Numbering › Convert to Text act on the text of every frame as one undo step, and the story stays selected after Convert to Text; a selection inside one frame changes only that frame (VectorCraft's own behavior; `textedit::remove_breaks_takes_the_whole_story_that_select_all_selected`, `textedit::convert_to_text_takes_the_whole_story_that_select_all_selected`).
|
||||
- When only some frames of a threaded story are selected, Remove Line Breaks and Remove Paragraph Breaks go through that story's frames once for all of them, not once per selected frame; each selected frame still loses its own breaks, in the order selected, as one undo step (`addons::cleanup::text::tests::remove_breaks_goes_through_a_partly_named_story_once`).
|
||||
- With the whole story of threaded text selected by Select All, the Character, Paragraph, OpenType, Tabs and Text Styles panels, the Justification dialog and the font menu change the frames that are in the edited frame's thread at the time of the change, locked and hidden frames included. A frame that has left the thread is not changed, and a frame added to the thread is (VectorCraft's own behavior; `panels::character::tests::story_changes_follow_the_edited_frames_thread_after_the_first_saved_frame_leaves`, `story_changes_leave_out_a_frame_that_left_and_take_in_a_frame_that_joined`, `story_changes_stay_in_the_edited_frame_once_its_thread_is_removed`, `story_changes_take_in_locked_and_hidden_frames`, `panels::tabs::tests::indent_markers_after_select_all_keep_each_story_paragraphs_indents`, `dialogs::justification::tests::justification_dialog_follows_the_story_thread_at_ok`).
|
||||
- With the whole story of threaded text selected by Select All, the Character, Paragraph, OpenType, Tabs and Text Styles panels, the Justification dialog and the font menu change the frames that are in the edited frame's thread at the time of the change, locked and hidden frames included. A frame that has left the thread is not changed, and a frame added to the thread is (VectorCraft's own behavior; `panels::character::tests::story_changes_follow_the_edited_frames_thread_after_the_first_saved_frame_leaves`, `story_changes_leave_out_a_frame_that_left_and_take_in_a_frame_that_joined`, `story_changes_stay_in_the_edited_frame_once_its_thread_is_removed`, `story_changes_take_in_locked_and_hidden_frames`).
|
||||
- With the Selection tool, a Character or Paragraph panel change to a selected frame of threaded text changes every frame of its story, locked and hidden frames included, as one undo step. The anti-aliasing method, Variable Font axes, the Tabs panel's tab stops and both panels' Reset Panel change the whole story too, and the panels show a value only when every frame of the story has it. A story selected through several of its frames or through a group is changed once, and other type keeps its formatting (VectorCraft's own behavior; `panels::character::tests::selection_tool_changes_reach_every_frame_of_the_story`, `selection_tool_fields_read_every_frame_of_the_story`, `selected_stories_list_each_frame_once`, `panels::paragraph::tests::selection_tool_paragraph_changes_reach_every_frame_of_the_story`, `panels::tabs::tests::selection_tool_tab_stops_reach_every_frame_of_the_story`).
|
||||
- With the Selection tool, the Justification dialog, the OpenType panel, a Character or Paragraph Styles row and Type › Bullets and Numbering › Convert to Text also change every frame of a selected story, locked and hidden frames included, as one undo step. The Justification dialog acts on the story's frames as they were when it opened. When the frames differ, the OpenType panel's Figure menu shows Mixed, its checkboxes show a dash (a click turns the feature on everywhere), and the style panels highlight no row; a row shows "+" when any frame overrides its style (VectorCraft's own behavior; `dialogs::justification::tests::selection_tool_justification_reaches_every_frame_of_the_story`, `panels::opentype::tests::selection_tool_features_reach_every_frame_of_the_story`, `panels::text_styles::tests::selection_tool_styles_reach_every_frame_of_the_story`, `panels::paragraph::tests::selection_tool_convert_to_text_takes_every_frame_of_the_story`).
|
||||
- Switching from a Type tool to the Eyedropper keeps a whole story selected by Select All: a pick applies to the text of every frame as one undo step, and switching back restores the story selection (VectorCraft's own behavior; `textedit::switching_to_the_eyedropper_keeps_the_whole_story_selected`).
|
||||
- While the Type tool edits text, a character typed with AltGr is typed and runs no command. Firefox on Windows reports AltGr as Ctrl and Alt held, so in the web build AltGr+L (ł on a Polish layout) does not also open Layer Options for a new layer, and AltGr+Q (@ on a German layout) does not also run Reset Tracking and Kerning. A Ctrl+Alt chord that types no character runs its command.
|
||||
- On a layout without Latin letters, a one-key shortcut goes by the position of the key that typed the character, in the web build too, where the character arrives before its key press: on a Russian layout the P key (`з`) chooses the Pen, and two keys pressed in one frame each run their own shortcut.
|
||||
@@ -1101,7 +1112,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
Curvature point markers are circular, with no direction handles. While drawing, its own point feedback replaces generic selection markers; existing paths use the selection overlay, including partial selections and Hide Edges. Anchor Size applies, and Direct Selection and Pen retain their handles. The real egui-frame regressions in `crates/ui-egui/src/canvas.rs` verify marker positions, counts and unchanged documents (#1236, in part); the existing-path interpolation request remains open. The curve through the points (`curvature_spline` in `crates/tools/src/draw2.rs`) makes each stretch of three points follow the circle through them: a smooth point's handles lie along that circle's tangent, each `chord / (3 cos²(α/2))` long (α between handle and chord, capped at 90°), and the ends of an open path mirror their neighbour's tangent in their chord, so a J or a U curves evenly, a turn tighter than 30° comes to a point, and uneven spacing doesn't loop; the rubber band, a dragged or inserted point and `path.convertAnchor` to smooth use the same rule, while the Pencil's fitting keeps its own; `tests/draw2.rs` checks that the rubber band is the path the click makes (#1236, in part). The Smooth tool smooths only the stretch of path under the drag (#1547, fixes #1512). A path the Smooth tool changes stays selected whole, and the anchor points and segments selected on it with Direct Selection are deselected. Selected paths the drag does not change keep their selected anchors, and undo restores the earlier selection (`tests/draw2.rs`, `smoothing_a_path_drops_its_direct_selected_anchors`). While the Smooth tool drags with a path selected that it can smooth, a dashed outline shows the band it smooths: everything within its radius of the drag (12 screen pixels, VectorCraft's own value), round at both ends; Alt smoothing with the Pencil, Paintbrush and Blob Brush shows the same band.
|
||||
While Alt is held during a Paintbrush stroke or before a press with no path selected that the Smooth tool can act on, the Paintbrush shows a closing cursor (a crosshair with a ring), and so does the Pencil with Alt key toggles to Smooth Tool off when Alt is pressed after the drag starts; releasing the mouse button with Alt still held closes the path. Before a Paintbrush press with such a path selected, Alt shows the Smooth cursor, and holding Alt at the press smooths that path with the Smooth tool's radius and Smooth Tool Options' Fidelity. A Pencil drag started with Shift or Alt held draws a straight line instead, which stays open.
|
||||
Smooth Tool Options' Fidelity is in pixels, as [the help page](https://help.adobe.com/archive/en_US/illustrator/cs3/illustrator_cs3_help.pdf#page=79) gives it: the Smooth tool, and an Alt smoothing drag with the Pencil, Paintbrush or Blob Brush, refits the path at Fidelity divided by the zoom, so a drag smooths a path as much on screen at 25 % as at 800 %. Reading the pixels as screen pixels is VectorCraft's own rule, as for the Pencil and the Paintbrush (#5729); the range (0.05 to 100 px) and the default (2.5 px) are VectorCraft's own values, and a saved Fidelity keeps its number (`crates/tools/src/draw2/gesture/tests.rs` test `smooth_fidelity_is_in_screen_pixels_at_any_zoom`, `crates/engine/src/tests/draw2.rs` test `smooth_region_refits_at_the_tolerance_sent_at_any_zoom`).
|
||||
With Shift held at the press, the Pencil draws a straight line from the press point to the pointer at 45° steps from the Constrain Angle, as [Draw straight lines with the Pencil tool](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/draw-straight-lines-with-the-pencil-tool.html) describes; pressed on an end of a selected open path, the line continues the path from that end (part of #3799). With Option/Alt held at the press and Alt key toggles to Smooth Tool off, the Pencil draws a straight line at any angle, whose ends snap to Smart Guides, and it stays open when Alt is still held at the release; Shift and Alt together keep the 45° steps (#3799). While Shift or Alt is held before the press, the Pencil shows a straight-line cursor (a crosshair with a short line), and over an end of a selected open path, where the line continues the path, a path-continuation cursor (the same line leaving a small square), as the page describes.
|
||||
With Shift held at the press, the Pencil draws a straight line from the press point to the pointer at 45° steps from the Constrain Angle, as [Draw straight lines with the Pencil tool](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/draw-straight-lines-with-the-pencil-tool.html) describes; pressed on an end of a selected open path, the line continues the path from that end (part of #3799). With Option/Alt held at the press and Alt key toggles to Smooth Tool off, the Pencil draws a straight line at any angle, whose ends snap to Smart Guides, and it stays open when Alt is still held at the release; Shift and Alt together keep the 45° steps (#3799). While Shift or Alt is held before the press, the Pencil shows a straight-line cursor (a crosshair with a short level line), as the page describes. Over an end of a selected open path, where the stroke continues the path, freehand or as a straight line, it shows a path-continuation cursor (a crosshair with a short line rising to the right), as [Extend paths with the Pencil tool](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/extend-paths-with-the-pencil-tool.html) describes, and again while a continuing stroke ends near an open end of another selected path, where the release connects the two ([Connect two paths with the Pencil tool](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/connect-two-paths-with-the-pencil-tool.html)). A continuing stroke, a straight line too, that ends within Close Paths When Ends Are Within of the path's other end shows the closing cursor, and the release closes the path; Alt held at the release closes a continuing freehand stroke too (a straight line stays open, as above).
|
||||
- **Shapes:** all shape tools (including Flare) and the line, arc, spiral and grid tools. Space held while dragging out a shape, line, arc, spiral or grid moves it at its current size. While a grid is dragged out, Up/Down change its rows (concentric dividers) and Left/Right its columns (radial dividers). A click with a grid tool asks for the size, the divider counts and the grid options (#1377, in part): a skew for each set of dividers, Use Outside Rectangle As Frame or Create Compound Path From Ellipses, and Fill Grid; they are parameters of `shape.rectangularGrid` and `shape.polarGrid`, stay as the tool's options and apply to drags too. A shape just drawn stays adjustable with its tool: its Live Shape widgets drag, a press on its centre point (Show Center) moves the selection with the Selection tool's move arrow, snapping and Alt copy, and a press in the rotate zone just outside a bounding-box corner turns it about the centre with the Selection tool's rotate cursor (#5477; tests `a_shape_tool_moves_the_selection_by_its_centre_point_and_turns_it_from_a_corner` and, through the engine, `shapetools.rs`). A drag on one of its eight bounding-box handles scales it as the Selection tool's handles do, with their cursors and snapping, instead of drawing a new shape from the handle. A shape tool takes a press as a handle's only on the drawn handle square (VectorCraft's own rule: 3 screen points from its centre along each axis at the default Anchor Size, a half point more or less per step; the Selection tool takes 5), so a press just beside a handle still draws (tests `a_shape_tool_scales_the_selection_by_its_bounding_box_handles`, `a_shape_tool_draws_from_a_press_just_beside_a_handle` and `a_shape_tool_scales_the_shape_just_drawn_by_its_bounding_box_handle`). The curve a skew percentage follows and the direction of the radial skew are our own (the public documentation gives neither), and the dialogs have no reference point locator. An ellipse's Pie Start and End Angle and Invert Pie (Transform and Properties panels' Ellipse Properties, `object.setLiveShape {pieStart, pieEnd, invertPie}`) cut it as a pie (#812). With the bounding box showing, the Selection tool shows a selected ellipse's two pie widgets just outside it; dragging one sets its angle in one undo step and double-clicking one makes the ellipse whole again. A live polygon's Polygon Properties there: side count, angle, corner type and radius, radius, side length and Make Sides Equal once an uneven scale has made its sides differ (`object.setLiveShape {sides, polygonAngle, polygonRadius, sideLength, makeSidesEqual}`, part of #812); a star is a plain path, as in Illustrator. The Flare Tool Options last as the tool's options: the next flare dragged out uses them, a click's dialog shows them and double-clicking the tool opens them (part of #812).
|
||||
- **Shapes:** all shape tools (including Flare) and the line, arc, spiral and grid tools. Space held while dragging out a shape, line, arc, spiral or grid moves it at its current size. The Flare tool's center drag turns the rays by 0.1 radian at each drag update in which the pointer's document y grows, and back by as much at each one in which it falls, Shift held keeps their turn, and Space held during either of its drags moves the flare. While a grid is dragged out, Up/Down change its rows (concentric dividers) and Left/Right its columns (radial dividers). A click with a grid tool asks for the size, the divider counts and the grid options (#1377, in part): a skew for each set of dividers, Use Outside Rectangle As Frame or Create Compound Path From Ellipses, and Fill Grid; they are parameters of `shape.rectangularGrid` and `shape.polarGrid`, stay as the tool's options and apply to drags too. The curve a skew percentage follows and the direction of the radial skew are our own (the public documentation gives neither), and the dialogs have no reference point locator. An ellipse's Pie Start and End Angle and Invert Pie (Transform and Properties panels' Ellipse Properties, `object.setLiveShape {pieStart, pieEnd, invertPie}`) cut it as a pie (#812). With the bounding box showing, the Selection tool shows a selected ellipse's two pie widgets just outside it; dragging one sets its angle in one undo step and double-clicking one makes the ellipse whole again. A live polygon's Polygon Properties there: side count, angle, corner type and radius, radius, side length and Make Sides Equal once an uneven scale has made its sides differ (`object.setLiveShape {sides, polygonAngle, polygonRadius, sideLength, makeSidesEqual}`, part of #812); a star is a plain path, as in Illustrator. The Flare Tool Options last as the tool's options: the next flare dragged out uses them, a click's dialog shows them and double-clicking the tool opens them (part of #812).
|
||||
- **Shapes:** all shape tools (including Flare) and the line, arc, spiral and grid tools. Space held while dragging out a shape, line, arc, spiral or grid moves it at its current size. The Flare tool's center drag turns the rays with the pointer, Shift keeps them in their original orientation (unturned, or turned by a nonzero General › Constrain Angle), and Space held during either of its drags moves the flare. While a grid is dragged out, Up/Down change its rows (concentric dividers) and Left/Right its columns (radial dividers). A click with a grid tool asks for the size, the divider counts and the grid options (#1377, in part): a skew for each set of dividers, Use Outside Rectangle As Frame or Create Compound Path From Ellipses, and Fill Grid; they are parameters of `shape.rectangularGrid` and `shape.polarGrid`, stay as the tool's options and apply to drags too. The curve a skew percentage follows and the direction of the radial skew are our own (the public documentation gives neither), and the dialogs have no reference point locator. An ellipse's Pie Start and End Angle and Invert Pie (Transform and Properties panels' Ellipse Properties, `object.setLiveShape {pieStart, pieEnd, invertPie}`) cut it as a pie (#812). With the bounding box showing, the Selection tool shows a selected ellipse's two pie widgets just outside it; dragging one sets its angle in one undo step and double-clicking one makes the ellipse whole again. A live polygon's Polygon Properties there: side count, angle, corner type and radius, radius, side length and Make Sides Equal once an uneven scale has made its sides differ (`object.setLiveShape {sides, polygonAngle, polygonRadius, sideLength, makeSidesEqual}`, part of #812); a star is a plain path, as in Illustrator. The Flare Tool Options last as the tool's options: the next flare dragged out uses them, a click's dialog shows them and double-clicking the tool opens them (part of #812).
|
||||
@@ -1133,6 +1144,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
`path.reshapeSegment` refuses a delta of 1e9 pt or longer, as `object.blend.spine.reshapeSegment` does, and `path.convertAnchor` and `path.freehand` refuse a point whose x or y is 1e9 pt or more in size.
|
||||
`path.reshapeSegment`, `object.blend.spine.reshapeSegment`, `path.convertAnchor`, `path.curvatureEdit`, `path.insertAnchor`, `path.moveAnchors`, `path.reshape`, `path.close` and the Pencil, Curvature, Knife, Eraser, Path Eraser, Smooth, Join and Blob Brush commands refuse a number, point or handle given as text, such as "10", and leave the document unchanged; `path.convertAnchor` refuses an `x` without a `y`, or a `y` without an `x`.
|
||||
`path.setHandle`, `path.moveAnchor`, `text.setPathHandle` (`anchor`), `path.insertAnchor` (`segment`), `artboard.reorder`, `library.moveGroup`, `graphicStyle.move` (`to`), `path.appendAnchor`, `path.close`, `path.reverse` (`subpath`) and the ruler origin commands (`artboard`) refuse a value that is not a whole number of 0 or more, such as `"3"` or `2.5`, with `` `anchor` must be a whole number ``, naming the key, instead of reporting it as missing or reading it as the default subpath or artboard; a null `artboard` is artboard 0 (`tests::params::a_malformed_index_is_not_missing_or_its_default`).
|
||||
The artboard commands that take `index`, `indices` or a replayed `selectedArtboards`, the artboard Align and Distribute commands (`artboard`, `activeArtboard`), `edit.newDocumentFromState` (`index`) and Paste in Place, in Front and in Back (`artboard`, `artboards`) report a value that is not a whole number as such, naming the key, and keep `no such artboard`, `no history state N` and the paste range messages for a whole number that names nothing; a null artboard `index` is `missing index`, and an `indices` value that is not a list, an empty list and a malformed entry each have their own message (`tests::panelcmds::artboard_lists_name_the_fault_and_the_key`).
|
||||
`path.close` and `path.setHandle` (`independent`), `path.moveAnchors` (`patterns`), the Pencil (`closed`, `keepSelected`, `fill`), Curvature (`closed` and a point's `corner`), `path.curvatureEdit` (`corner`), `path.reshapeSegment` (`perpendicular`) and the Blob Brush (`keepSelected`, `mergeOnlySelection`, `merge`) refuse a value other than true, false or null, such as "true", and leave the document unchanged.
|
||||
Direct Selection's marquee selects the frame anchors of area type that lie inside it, and a click on a frame anchor selects that one; Shift toggles them. The selected frame anchors show filled. A drag of one of them moves all of them, the arrow keys nudge them, and the type reflows at its size (`text.reshapeArea`, which takes `items` to move the anchors of several frames in one step), as [Create text](http://web.archive.org/web/20220127090642/https://helpx.adobe.com/illustrator/using/creating-text.html) and [Selecting objects](http://web.archive.org/web/20211230015528/https://helpx.adobe.com/illustrator/using/selecting-objects.html) describe. When the selection also holds other objects, path anchors or ruler guides, or when another change to the document or the selection follows the pick, the type is selected whole.
|
||||
A press on a selected object's centre point (Attributes panel › Show Center) selects the object whole, and a drag from it moves the object as one Move, held by that point (#4891; test `the_centre_point_selects_and_moves_the_object_whole`).
|
||||
@@ -1146,7 +1158,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
- **Blend steps of brushed strokes:** the steps interpolate the pen pressure, tilt, bearing and rotation recorded with the Paintbrush, so a Calligraphic, Scatter or Art brush that varies with the pen changes gradually from one key to the next. A key without a recording counts as half pressure, half tilt and 0°, as brushes read it, and angles turn the shorter way round. When the blend starts a key's path at another anchor (an open path run from its end, a closed one turned to another start), the key's recordings, width profile, arrowheads, dashes and a gradient along or across the stroke turn with the path. Different brushes still switch halfway (VectorCraft's own rule; strokes blend their options, as [Blended objects overview](https://helpx.adobe.com/illustrator/desktop/manage-colors/apply-transparency-and-blending/blended-objects-overview.html) describes; `crates/doc/src/blend.rs`, `pen_pressure_tilt_and_angles_interpolate_for_brushes`, `stroke_profiles_turn_with_a_key_path_started_elsewhere`, `stroke_gradients_and_dashes_turn_with_a_key_path_started_elsewhere`).
|
||||
- **Blend steps of spot gradients with process plates:** when the matching stops of two gradients, or of a gradient and a solid, are tints of one spot swatch, each step's stop stays linked to it at a tint between the two and keeps the process inks printed with it, each of C, M, Y and K between the two stops' amounts; a stop or solid without process inks counts as none of each. Gradients with different stop counts keep the inks at every resampled stop. PDF export writes such a step as one DeviceN shading of the spot and process inks. Tints of one spot color blend into tints of it, as [the help page](https://helpx.adobe.com/illustrator/desktop/manage-colors/apply-transparency-and-blending/blended-objects-overview.html) describes; the process-ink interpolation is VectorCraft's own rule (`crates/doc/src/blend.rs`, `blend_gradient_spot_process_plates_interpolate`, `resampled_gradient_spot_process_plates_interpolate`, `blend_gradient_missing_plates_mean_zero`, `blend_solid_to_spot_gradient_does_not_copy_plates`; `crates/pdf/src/tests/output.rs`, `blend_steps_between_spot_gradients_with_process_plates_print_both_inks`).
|
||||
- **Path editing (#494):** the handles shown are the handles that drag: Direct Selection drags those of a path selected as a whole (as the Pen leaves it), the Anchor Point tool and Pen+Alt no longer grab handles that Show handles when multiple anchors are selected hides, a handle shorter than the tolerance leaves its anchor to be picked, and the anchor tools pick within Selection & Anchor Display › Tolerance. A dragged segment keeps a smooth anchor at either end smooth. With Direct Selection, the Pen, the Curvature and the anchor tools, a path selected as a whole shows all its anchors selected, and the Control bar and the Properties panel offer Convert (corner, smooth) for them too; Remove and Cut wait for anchors direct-selected (#504). A handle drag gathers its snap targets once per drag (it took 21 ms per pointer move on a 20,000-path document, now 1 ms; `vectorcraft-cli perf` measures handle and segment drags on a 5,000-anchor path). Join merges the selected anchor points that lie on one another, as after Average, into one anchor (#1582, fixes #1533), and removes the merged anchors in one pass over the path, so a long run of them no longer moves the anchors after it once per merge (`cmd::path::tests::a_long_run_before_many_other_anchors_merges_in_one_pass`); Object › Path › Average & Join… (`path.averageJoin`, Cmd+Alt+Shift+J, the "Create corner or smooth join" shortcut of [Default keyboard shortcuts](https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html)) moves two open path ends to their midpoint and joins them there, a corner or smooth point as its dialog's Points choice asks, in one undo step.
|
||||
- **Graphs:** Column, Stacked Column, Bar, Stacked Bar, Line, Area, Scatter, Pie and Radar graph tools with Graph Data and Graph Type. A series starts in greyscale; Group Selection's fill and stroke, the paint, weight, opacity and blend mode of a mark's top visible fill or stroke row after an Appearance command or a graphic style (each given a mark or its series picked with Group Selection), the Eyedropper, Default Fill and Stroke or Swap Fill and Stroke, the paint or stroke weight a stroke weight, gradient or recolor command changes there, and a mark's object opacity and blend mode, are kept separately on the graph and reapplied when its data, type or size changes, and through save, open and undo; a kept gradient takes the same place on each mark's own box. A series that draws Filled Lines bands keeps no stroke paint or weight: its bands are drawn again with their 0.25 pt black outline. Graph Type's Override Calculated Values (both `axisMin` and `axisMax`) uses exactly that value-axis range, split into the tick count (5 when automatic). Line graphs take Edge-to-Edge Lines (off by default: the points sit at the centres of their categories; graphs saved before the option keep their edge-to-edge lines), and radar graphs follow Mark Data Points and Connect Data Points. Blank cells (an empty CSV cell or `null`) are values left out, not zeros: columns, bars and stacked segments skip them, lines and scatter lines break around them and the value axis ignores them, while area, pie and radar draw them as 0; a number in straight quotes is a label, and the data window writes it back quoted. Graph types combine: Graph Type on series picked with Group Selection (or `series` indexes) draws them as their own type, with column, stacked column, line and area mixing on the vertical value axis and bar and stacked bar on the horizontal one; stacked columns take one slot of the cluster, lines draw in front of columns and areas behind. The value axis goes on the left, the right or both sides (column, stacked column, line, area and scatter graphs; bar graphs keep theirs along the bottom), and Separate Scales gives the series assigned to the right axis a scale of their own with its own tick values. Each value axis takes tick marks of no, short or full (across the plot) length and a count per division, and a prefix and suffix for its numbers; the category axis takes tick marks too (none by default), at or between its labels. Graph designs: Object › Graph › Design lists the designs with a preview of the selected one, and New Design (the selected art), Rename, Delete Design, Paste Design (a copy back to edit) and Select Unused, and Marker draws the data points and legend swatches of line, scatter and radar series with a design, scaled so its backmost object fills the default marker's square. The Appearance, effect and graphic style commands do not edit a design's art inside a series, which the graph draws again from the design. Graph Data transposes rows and columns and switches a scatter graph's x and y, and a `|` in a category or series label starts a new line. Pie graphs take Legends in Wedges, Position (Even, Ratio sized by area, Stacked on one centre) and Sort (None, All, First). Graph Type takes column and cluster widths up to 1000% (overlapping past 100%) with First Row and First Column in Front (First Row orders each series' categories; across series the series order decides, so series stay one group each for Group Selection), draws filled lines, adds drop shadows behind columns, bars, lines and wedges, and puts the legend in rows across the top. Text formatted with the Character, Paragraph, Appearance, Transparency or Graphic Styles controls or the Eyedropper, or recolored, given Swap Fill and Stroke or Default Fill and Stroke, or given stroke options or a gradient, on the whole graph or on labels picked with Group Selection, is kept per kind of label (value axis numbers, category labels, legend labels) through the graph being drawn again, the paint, weight, opacity and blend mode of a label's topmost visible fill and stroke rows and its object opacity and blend mode included. Object › Graph › Data opens a worksheet: cells picked with a click and edited above the sheet (Tab moves right, Enter down, the arrows between cells), Import Data from a tab-separated text file, Transpose, Switch x/y, Cell Style (decimals shown, column width), Revert and Apply. `graph.setData` returns and takes the data as CSV with each value written exactly, not rounded to two decimals, so applying the returned CSV changes nothing (#1485).
|
||||
- **Graphs:** Column, Stacked Column, Bar, Stacked Bar, Line, Area, Scatter, Pie and Radar graph tools with Graph Data and Graph Type. A series starts in greyscale; Group Selection's fill and stroke, the paint, weight, opacity and blend mode of a mark's top visible fill or stroke row after an Appearance command or a graphic style (each given a mark or its series picked with Group Selection), the Eyedropper, Default Fill and Stroke or Swap Fill and Stroke, the paint or stroke weight a stroke weight, gradient or recolor command changes there, and a mark's object opacity and blend mode, are kept separately on the graph and reapplied when its data, type or size changes, and through save, open and undo; a kept gradient takes the same place on each mark's own box. A series that draws Filled Lines bands keeps no stroke paint or weight: its bands are drawn again with their 0.25 pt black outline. Graph Type's Override Calculated Values (both `axisMin` and `axisMax`) uses exactly that value-axis range, split into the tick count (5 when automatic). Line graphs take Edge-to-Edge Lines (off by default: the points sit at the centres of their categories; graphs saved before the option keep their edge-to-edge lines), and radar graphs follow Mark Data Points and Connect Data Points. Blank cells (an empty CSV cell or `null`) are values left out, not zeros: columns, bars and stacked segments skip them, lines and scatter lines break around them and the value axis ignores them, while area, pie and radar draw them as 0; a number in straight quotes is a label, and the data window writes it back quoted. Graph types combine: Graph Type on series picked with Group Selection (or `series` indexes) draws them as their own type, with column, stacked column, line and area mixing on the vertical value axis and bar and stacked bar on the horizontal one; stacked columns take one slot of the cluster, lines draw in front of columns and areas behind. The value axis goes on the left, the right or both sides (column, stacked column, line, area and scatter graphs; bar graphs keep theirs along the bottom), and Separate Scales gives the series assigned to the right axis a scale of their own with its own tick values. Each value axis takes tick marks of no, short or full (across the plot) length and a count per division, and a prefix and suffix for its numbers; the category axis takes tick marks too (none by default), at or between its labels. Graph designs: Object › Graph › Design lists the designs with a preview of the selected one, and New Design (the selected art), Rename, Delete Design, Paste Design (a copy back to edit) and Select Unused, and Marker draws the data points and legend swatches of line, scatter and radar series with a design, scaled so its backmost object fills the default marker's square. The Appearance, effect and graphic style commands do not edit a design's art inside a series, which the graph draws again from the design. Graph Data transposes rows and columns and switches a scatter graph's x and y, and a `|` in a category or series label starts a new line. Pie graphs take Legends in Wedges, Position (Even, Ratio sized by area, Stacked on one centre) and Sort (None, All, First). Graph Type takes column and cluster widths up to 1000% (overlapping past 100%) with First Row and First Column in Front (First Row orders each series' categories; across series the series order decides, so series stay one group each for Group Selection), draws filled lines, adds drop shadows behind columns, bars, lines and wedges, and puts the legend in rows across the top. Text formatted with the Character, Paragraph, Appearance, Transparency or Graphic Styles controls or the Eyedropper, or recolored, given Swap Fill and Stroke or Default Fill and Stroke, or given stroke options or a gradient, on the whole graph or on labels picked with Group Selection, is kept per kind of label (value axis numbers, category labels, legend labels) through the graph being drawn again, the paint, weight, opacity and blend mode of a label's topmost visible fill and stroke rows and its object opacity and blend mode included. On a pie with Legends in Wedges, the legend labels are drawn black, or white on a dark wedge, until a command sets their fill, which is then drawn on every wedge, black included, and kept through save and open. Object › Graph › Data opens a worksheet: cells picked with a click and edited above the sheet (Tab moves right, Enter down, the arrows between cells), Import Data from a tab-separated text file, Transpose, Switch x/y, Cell Style (decimals shown, column width), Revert and Apply. `graph.setData` returns and takes the data as CSV with each value written exactly, not rounded to two decimals, so applying the returned CSV changes nothing (#1485).
|
||||
An Eyedropper pick that includes transparency and leaves a mark's top fill or stroke row without paint, or removes that row when the source has no row of that kind, where that row had paint before, also replaces the opacity and blend mode the graph keeps for that kind of row in the series; a row that had no paint before the pick leaves them as they are.
|
||||
What Global Edit gives a mark from another match (in an isolated graph) is kept on the graph the same way, and so is the object opacity, with its blend mode, that Randomize Opacity and Sort Objects change on marks.
|
||||
- **Graph column designs:** Object › Graph › Column (`graph.column`) draws the columns, bars or stacked segments and the legend swatch of the series picked with Group Selection with a graph design: Vertically Scaled stretches it to each column's length, Uniformly Scaled scales it both ways and centers it, Repeating stacks a copy for each Each Design Represents value and chops or scales the last one (For Fractions), and Sliding keeps the part above the design's guide line in proportion and stretches the part below. The dialog lists the designs with a preview; the choice is saved with the graph and follows the design's rename and delete.
|
||||
@@ -1185,6 +1197,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
When a Smooth tool drag reaches the first anchor of a closed path, the smoothed path starts at its point nearest where that anchor was: at an anchor there, or at a new anchor split into the curve without changing its outline. Dashes and type on the path start from that point. A drag that does not reach the first anchor leaves it first. This is VectorCraft's own rule (engine tests `smoothing_over_a_closed_paths_first_anchor_keeps_its_start` and `smoothing_a_whole_closed_path_with_a_spike_keeps_its_start`).
|
||||
The Smooth tool shows the Not Allowed cursor while no path is selected that it can act on (an editable path, not a guide, with three or more anchors on one of its subpaths or two anchors joined by a curve), and the release of a drag then sends no command and changes nothing; [the help page](https://helpx.adobe.com/illustrator/using/tool-techniques/smooth-tool.html) has the path selected first. A selected path anywhere on the canvas gives the Smooth cursor wherever the pointer is. The Pencil with Alt key toggles to Smooth Tool on and the Blob Brush show Not Allowed the same way when Alt gives them the Smooth tool; the Paintbrush keeps its closing cursor, since its release with Alt closes the stroke. Use Precise Cursors leaves Not Allowed as it is. This cursor rule is VectorCraft's own (tools `smooth_shows_not_allowed_without_a_selected_path_to_smooth`, `borrowed_smooth_shows_not_allowed_without_a_selected_path_to_smooth`, `smoothing_release_sends_nothing_without_a_selected_path_to_smooth`; engine `use_precise_cursors_keeps_the_smooth_tools_not_allowed_pointer`).
|
||||
When a Smooth tool drag reaches the first or last anchor of an open path, that anchor stays where it is and the curve there leaves or arrives along the smoothed path within the reach, so a jagged first or last segment no longer sets the end's direction; an end where the smoothed path turns back by 90° or more keeps its segment's direction, and where the refitted stretch ends inside the path the curve keeps the direction of the part outside the drag. This rule is VectorCraft's own (`tests/draw2.rs`, `smoothing_an_open_path_turns_its_jagged_ends_with_the_path` and `a_smooth_drag_turns_only_the_end_it_reaches`).
|
||||
A Smooth tool drag keeps a corner where the path turns by more than 57.5° (an angle inside the corner under 122.5°) and rounds a wider one. An anchor is kept as a corner when the path turns by that much at the anchor and also over the drag's reach and over twice the reach on either side of it, so a jag or a bump smaller than the reach is still smoothed; [the help page](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/modify-paths/refine-paths.html) describes the tool as reducing irregularities in a path. The stretches on either side of a kept corner are smoothed and refitted on their own, and the corner keeps its place and the directions the path arrives and leaves along, on every drag, on open and closed paths, the anchor a closed path starts at included. A drag that changes no anchor adds no undo step. The threshold and the two distances are VectorCraft's own values, the same on every drag and at any Fidelity (`tests/draw2.rs`, `the_smooth_tool_keeps_corners_sharper_than_its_threshold`, `smoothing_a_closed_path_keeps_its_corners` and `a_smooth_drag_that_only_meets_corners_adds_no_undo_step`).
|
||||
A Smooth drag along a curved segment smooths the stretch of it in the drag's reach even when neither of the segment's anchors is in reach, as [the help page](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/modify-paths/refine-paths.html) describes dragging along the path segment; the segment is cut where the drag enters and leaves the reach, and the parts outside keep their shape (`path.smoothRegion`). Paths of two anchors are smoothed too, and Alt with the Paintbrush smooths a selected two-anchor curve; a two-anchor straight line still gets the closed stroke. How the reach is found on a segment (samples no more than half the reach apart) is VectorCraft's own, and a straight segment is left as it is.
|
||||
Before a press that draws a new path, the Pencil cursor shows a small star, as [Draw freeform paths with the Pencil tool](https://web.archive.org/web/20260926095638/https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/draw-freeform-paths-with-the-pencil-tool.html) describes; over a selected path within Edit selected paths' distance, which the press continues from an end or redraws, the star is not shown ([Reshape paths with the Pencil tool](https://web.archive.org/web/20260106004407/https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/reshape-paths-with-the-pencil-tool.html)).
|
||||
Keep selected in the Pencil and Paintbrush Tool Options is on by default: while it is on, a stroke selects the path it draws or continues and replaces the earlier selection. While it is off, a new stroke leaves nothing selected, the earlier selection included, as the reference application starts the stroke by dropping it (#5752); a continued or redrawn path is deselected while the rest of the selection stays (`path.freehand` `keepSelected`).
|
||||
@@ -1201,7 +1214,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
The Blob Brush Tool Options' tip preview is the Angle slider for screen readers, with the Angle in degrees as its value: a click or a drag in it points the Angle at the pointer and gives it the keyboard focus, Tab reaches it after the Roundness field, and the arrow keys step the Angle by 1° (10° with Shift, Home and End to −180° and 180°).
|
||||
The Blob Brush Tool Options also have Fidelity, which the reference app's [Blob Brush options](https://web.archive.org/web/20261012042029/https://helpx.adobe.com/illustrator/desktop/paint-and-fill/learn-painting-basics/blob-brush-options-and-best-practices.html) list as setting how far the pointer moves before the path gets a new anchor point. The range and default are VectorCraft's own values: the Pencil's logarithmic slider from Accurate (0.01 pt) to Smooth (20 pt) and its field (up to 100 pt), 1.5 pt by default and kept with the tool's options. The brush follows the stroke fitted at the Fidelity, as a Pencil stroke is fitted: a low value follows the drag closely, jitter included, and a higher one gives smoother curves (`path.blob` `fidelity`).
|
||||
A Blob Brush stroke merges with the topmost path of its fill color and no stroke that it touches, and with the other such paths it touches in the same group or layer that are next to that path in stacking order with no other kind of object between them; matching paths in other groups or layers are left alone, as the Blob Brush tool guidelines in [Paint with fills and strokes](https://web.archive.org/web/20241219085603/https://helpx.adobe.com/illustrator/using/painting-fills-strokes.html) describe (`path.blob`).
|
||||
- **Ruler guides as layer objects:** a guide goes on the current layer, shows, hides, locks and is deleted with it, is listed in the Layers panel (its row selects it) and moves to another layer (`guide.setLayer`, or its row dragged onto that layer's rows); guides on a hidden or locked layer can't be selected, moved or deleted, Duplicate copies a layer's guides and Merge Selected and Flatten Artwork keep them on the merged layer; guides from files saved before guides had layers go on the top visible, unlocked layer when the document opens. A guide's row has its own eye and lock, which hide or lock that guide alone in one undo step and take part in a drag down either column ([help page](https://helpx.adobe.com/in_hi/tutorial-builder/user-guide/illustrator-tutorial-builder/-ai--examples-of-common-coach-marks.html) lists a Guide among the Layers panel's items); a hidden guide is not drawn and does not snap, a locked one is drawn and snaps but can't be selected, moved or deleted, and its own state is kept through save and reopen and while its layer is hidden or locked (`layer.setProps` on its `guide.list` id). Object › Lock › Selection and Object › Hide › Selection lock or hide a selected guide with the selected art, and Unlock All and Show All unlock or show such guides and select them ([help page](https://help.adobe.com/archive/en_US/illustrator/cs3/illustrator_cs3_help.pdf) for Lock and Hide Selection). A guide row dropped on the panel's trash deletes its guide, the trash deletes a guide its row selected, and after a click on a guide row Delete deletes the guide rather than the rows highlighted before ([help page](https://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/align-graphic-objects-with-guides.html) for deleting a selected guide). Not done: guides stacked among the art of their layer (they are listed above it). Lock Guides also locks the objects made into guides: they can't be selected, moved or deleted (#1543); they are drawn in the guide colour and style of Preferences, and a dragged selection snaps to ruler guides with Smart Guides on (#1583, fixes #1534). Preferences › Guides & Grid › Lock Guides by Default locks guides when the app starts; it is off by default, and new guides can still be dragged out of a ruler while guides are locked. The Transform panel shows a selected ruler guide's X or Y, and typing a value moves it (#1659, part of #1597). This is not established by the documentation we could find: the public help pages on guides, rulers and the Transform, Control and Properties panels (read again on 2026-10-14) describe selecting and dragging unlocked guides and the panels' X and Y for a selection, not a guide's position in a panel, and the one public statement of it is a user's [community answer](https://community.adobe.com/questions-652/adding-a-new-custom-guide-785586), which is not documentation. It is kept as a convenience pending the owner's decision, with no parity claim and nothing counted towards a score.
|
||||
- **Ruler guides as layer objects:** a guide goes on the current layer, shows, hides, locks and is deleted with it, is listed in the Layers panel (its row selects it) and moves to another layer (`guide.setLayer`, or its row dragged onto that layer's rows); guides on a hidden or locked layer can't be selected, moved or deleted, Duplicate copies a layer's guides and Merge Selected and Flatten Artwork keep them on the merged layer; guides from files saved before guides had layers go on the top visible, unlocked layer when the document opens. A guide's row has its own eye and lock, which hide or lock that guide alone in one undo step and take part in a drag down either column ([help page](https://helpx.adobe.com/in_hi/tutorial-builder/user-guide/illustrator-tutorial-builder/-ai--examples-of-common-coach-marks.html) lists a Guide among the Layers panel's items); a hidden guide is not drawn and does not snap, a locked one is drawn and snaps but can't be selected, moved or deleted, and its own state is kept through save and reopen and while its layer is hidden or locked (`layer.setProps` on its `guide.list` id). Object › Lock › Selection and Object › Hide › Selection lock or hide a selected guide with the selected art, and Unlock All and Show All unlock or show such guides and select them ([help page](https://help.adobe.com/archive/en_US/illustrator/cs3/illustrator_cs3_help.pdf) for Lock and Hide Selection). A guide row dropped on the panel's trash deletes its guide, the trash deletes a guide its row selected, and after a click on a guide row Delete deletes the guide rather than the rows highlighted before ([help page](https://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/align-graphic-objects-with-guides.html) for deleting a selected guide). A plain click on another row lets go of a guide its row selected, keeping the selected art, as a plain click on a row picks that row alone; a Ctrl/Cmd or Shift click keeps it (#7340, `panels::layers` test `a_plain_row_click_lets_go_of_the_selected_guide`). Not done: guides stacked among the art of their layer (they are listed above it). Lock Guides also locks the objects made into guides: they can't be selected, moved or deleted (#1543); they are drawn in the guide colour and style of Preferences, and a dragged selection snaps to ruler guides with Smart Guides on (#1583, fixes #1534). Preferences › Guides & Grid › Lock Guides by Default locks guides when the app starts; it is off by default, and new guides can still be dragged out of a ruler while guides are locked. The Transform panel shows a selected ruler guide's X or Y, and typing a value moves it (#1659, part of #1597). This is not established by the documentation we could find: the public help pages on guides, rulers and the Transform, Control and Properties panels (read again on 2026-10-14) describe selecting and dragging unlocked guides and the panels' X and Y for a selection, not a guide's position in a panel, and the one public statement of it is a user's [community answer](https://community.adobe.com/questions-652/adding-a-new-custom-guide-785586), which is not documentation. It is kept as a convenience pending the owner's decision, with no parity claim and nothing counted towards a score.
|
||||
- **Releasing ruler guides:** View › Guides › Release Guides turns the selected ruler guides into paths with no fill or stroke. An artboard guide becomes a line across its artboard, and a canvas guide becomes a line across the artboards (`view.guides.release {index?, ids?}`). A Cmd/Ctrl+Shift double-click with the Selection, Direct Selection or Group Selection tool releases the ruler guide or guide path under the pointer.
|
||||
- **Layers panel:** every layer, sublayer, group and object is a clickable row at any depth: a click highlights it and makes its layer current (new art goes there), Shift-click a range, Ctrl/Cmd-click toggles. Sublayers are no longer treated as objects: clicks, marquees, Select All and the Select menu take the art inside them, and each sublayer selects in its own colour. Selection squares on rows with selected art (click selects a row's art, Shift adds or removes; dragging the square moves the selection to another row, Alt copies), the eye and lock on every row with drag-down-the-column (one undo step), Ctrl/Cmd-click an eye for per-layer Outline, Alt-click an eye or lock to hide or lock the other layers (again: show or unlock them all), triangles with Alt to open or close everything inside, drag and drop rows above, below or into layers and groups with a drop line (Alt copies) and a dimmed copy of the row under the pointer (layers dropped in the empty space under the last row go below the bottom layer, #2260; dropped on the trash rows are deleted, on New Layer duplicated, as in Illustrator), inline rename, Delete key on highlighted rows. Buttons and the full panel menu: New Layer/Sublayer (Alt: options, Ctrl: on top), Duplicate, Delete, Options for Selection, clipping mask, isolation, Locate Object, Merge Selected, Flatten Artwork, Collect in New Layer, Collect for Export (As Single Asset, As Multiple Assets), Release to Layers (Sequence and Build), Reverse Order, Template, Hide/Outline/Lock Others and Show/Preview/Unlock All, Paste Remembers Layers, Panel Options (row size, thumbnails per kind, Show Layers Only). Right-clicking a layer, sublayer, group or object row offers Collect for Export for that row, or for every highlighted row when it is one of them; guide and blend spine rows have no context menu. Layer Options: name, colour (presets, each with a chip of its colour, or custom), Template, Lock, Show, Print, Preview (outline drawing and clicking) and Dim Images to %. Every operation is a command (`layer.move`, `layer.highlight`, `layer.merge`…) with validation against cycles and invalid nesting. A document opens with only its top-level layers open; the rows left open are saved in the native file (nothing is written for the default) and reopen that way. Only the rows scrolled into view are laid out, from a row list made once per change: a layer of 5,000 groups of 10 paths, all open, draws the panel in 0.4 ms a frame instead of about 29 s (#638).
|
||||
With Paste Remembers Layers on, art copied from a sublayer pastes back into that sublayer, as [the help page](https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=223) describes art going back to the layer it was copied from: in the same document while the sublayer is still there, two sublayers of the same name in different layers kept apart; in another document by the names of the sublayer and the layers around it. These rules are VectorCraft's own: a missing sublayer is made inside its layer (a missing layer on top, with the sublayer inside it), in the paste's one undo step; of layers with the same names, the topmost chain that matches the most names wins, a shown and unlocked one first; a matched layer that is hidden or locked, or inside one that is, refuses the paste, and nothing is pasted.
|
||||
@@ -1289,6 +1302,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
- Extrude & Bevel, Inflate and Rotate (Effect › 3D and Materials): live effects in the `three-d` crate with depth, twist, taper, solid or hollow caps, five original bevel shapes (width, height, repeat, spacing, inside, both sides), Inflate's volume, both sides, twist, taper and cap, Rotate's turned fills and strokes, Position presets, the rotation and light gizmos, SVG/PDF vector output and Expand Appearance; one 3D effect per object; covered by geometry, effect, canvas-versus-export, command and dialog tests ([three-d.md](three-d.md)).
|
||||
- Extrude & Bevel and Inflate build detailed shapes: each solid takes up to 65,536 outline points and 163,840 faces (VectorCraft's own limits, was 2,048 points and 32,768 faces), counted before any point is sampled; when the faces do not fit, every curve takes fewer pieces, down to 4. A closed path of 2,000 curves extrudes with a bevel and inflates, and paths of 5,000 and 10,000 curves build at the default settings (`crates/three-d/src/solid/tests_limits.rs`).
|
||||
- The solids of one Extrude & Bevel (both kinds) or Inflate effect on one object, its fill's, its strokes' and a group's members' together, keep up to 163,840 faces (VectorCraft's own limit). Each solid is built in turn; once their faces pass the limit, no later solid is built, the object draws its source art, and applying or editing the effect, Export 3D Object and Expand as Wireframes report that the 3D surface is too complex. Tests `solids::tests::an_objects_solids_count_their_faces_together`, `a_groups_solids_together_past_the_limit_draw_the_source`, `a_fill_and_strokes_together_past_the_limit_draw_the_source`.
|
||||
- Inflate at a Volume of 0 % works out each shape's puff only when its solid is built, so no puff is worked out for the shapes after the face limit stops, and the solids are the same bit for bit; with any volume every puff is worked out first, as the highest one places the eye. The shadow builds no solid for a fully transparent fill or stroke. Tests `solid::tests::a_flat_inflate_solves_each_puff_as_its_solid_is_taken`, `a_flat_inflate_solved_as_taken_matches_one_solved_first`, `shadow::tests::an_inflate_shape_that_casts_nothing_builds_no_solid`.
|
||||
- Extrude & Bevel (both kinds) and Rotate keep the art's curves in the faces they draw, export and expand: caps and the edges of walls and bevels where they meet a cap are cubics with smooth anchors where the art's are, fitted within 0.001 pt in perspective and within the sampling tolerance on a bevel's inset. An edge of a twisted wall that is cut into pieces, a piece of curve that does not fit after 8 halvings, and the curves past 1,048,576 for one solid stay straight (VectorCraft's own values; [three-d.md](three-d.md#what-differs-from-the-public-documentation)). Tests `solid::tests::a_cap_keeps_the_curves_of_the_art`, `a_cap_in_perspective_fits_the_projected_curves`, `a_beveled_cap_and_its_walls_share_their_curves`, `twisted_beveled_tiny_and_degenerate_caps_keep_their_curves`.
|
||||
- Export 3D Object (Asset Export's menu): an object with Extrude & Bevel, Revolve, Inflate or Rotate becomes a 3D asset whose Format is USDA (the default), USDZ, glTF or OBJ, and Export writes each of its solids as a mesh with a material in its paint's color (`assets.add3D`, `assets.set3DFormat`, `assets.export3D`; [export 3D vector artwork](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/create-3d-graphics/export-3d-vector-artwork.html)).
|
||||
- Export 3D Object builds each Extrude & Bevel (both kinds) and Inflate solid once: the same build gives the faces that count toward the object's limit and the faces of its mesh, and the meshes match those of a separate build bit for bit. Tests `mesh::tests::a_meshed_solid_is_built_once`, `an_extruded_solid_and_its_mesh_match_the_two_built_apart`, `inflated_solids_and_their_meshes_match_the_two_built_apart`, `solids::tests_mesh::one_build_exports_the_meshes_built_apart`, `a_stroke_past_the_limits_is_left_out_of_the_export`.
|
||||
@@ -1341,11 +1355,11 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
- **Mouse wheel over the font family field (#5253):** In the Character and Properties panels and the Control bar, turning the mouse wheel over the closed font family field applies the next family to the selected type (the previous one when turned up), keeping the style when the family has it, else its closest. Each notch is one undo step; leaving the field or Escape keeps the family, and Undo takes it back. The steps use the font menu's order at the first turn and keep it until the pointer leaves the field or the text selection changes, so recent-font updates do not reshuffle later turns. That order follows the font filters every font menu shares (one chosen in the Glyphs panel's menu or a dialog's applies too) but ignores its search text, puts recent families first, and stops at the first and last family. A turn with a modifier key is left to the panel and the canvas. Behavior reference: the [Illustrator CS6 reference](https://help.adobe.com/archive/en/illustrator/cs6/illustrator_reference.pdf#page=10) describes editing hovered dropdown controls with the mouse wheel; [Find and apply fonts](https://helpx.adobe.com/illustrator/desktop/design-with-text/fonts-and-scripts/find-and-apply-fonts.html) names the family field's places. Applying it to the font field, the order, the ends and the undo steps are VectorCraft's own rules. Tests: `crates/ui-egui/src/tests/font_menu.rs`, `crates/ui-egui/src/font_menu/tests.rs`, `crates/ui-egui/tests/font_wheel.rs`.
|
||||
- **Type:** Character size, leading, baseline shift and horizontal-scale controls account for object/group transforms (#1034): exact document-point sizes, mixed-value display and keyboard increments, range edits, resettable horizontal stretch, undo/redo and native save/reopen (`tests_typescale`, Character panel tests). Point size is the transformed em-height axis, independent of glyph ink bounds; affine rotation, reflection and shear are retained. Group scaling still scales text; preserving font sizes is a separate enhancement. Behaviour reference: [Transform text](https://helpx.adobe.com/illustrator/desktop/design-with-text/edit-format-text/transform-text.html) (public documentation). Text Wrap, Type on a Path effects (Rainbow/Skew/3D Ribbon/Stair Step/Gravity) and Options (Flip, Align to Path, Spacing; OK keeps the type where it is), type on a path's start, centre and end brackets (Selection and Direct Selection drag them to set where the type runs, slide it along its path and, across the path, flip it: #429), Character and Paragraph Styles (override-preserving redefine), paragraph attributes per paragraph (alignment, indents, spacing, hyphenation, hanging punctuation, tab stops, paragraph style, direction, mojikumi and leading model; the Paragraph, Tabs and Paragraph Styles panels act on the paragraphs the Type tool's selection or caret touches, Return continues the paragraph's style, threads and SVG keep them), Area Type Options (rows/columns/inset/first baseline, Text Flow by rows or by columns (#4978), vertical Align Top/Center/Bottom/Justify per row/column, reflowing non-rectangular frames and text wrap), threaded text across any closed shapes, Fit Headline, the Every-line Composer for justified and ragged text (paragraph-wide breaks for an even rag, Single-line per object from the Paragraph panel menu or `text.setFormat {composer}`). Area type resizes like Illustrator's type areas: a bounding-box handle drag (Selection tool) or Area Type Options Width/Height size the frame and the text reflows at its size (threads too); Direct Selection drags a frame corner or edge (`text.reshapeArea`), and an anchor of the path of type on a path outside perspective, the type reflowing along it (`text.reshapePath`, #3980). Point type still scales. Auto Size: the frame height follows the text after every edit, in the same undo step (rectangular frames of horizontal type in one row; columns get the least height that holds them; a height set by hand or threading turns it off), and the "Auto Size New Area Type" preference gives it to new area type. Shrink Text to Fit (beyond Illustrator): overflowing area type scales its sizes, leading and baseline shifts down by the largest factor (in 0.1 pt steps of the first run, down to a minimum percentage) that fits, at layout time so every export sees it. `text.areaOptions` and `document.inspect` report overflow and the shrink factor. The Selection tool shows the type widget beside selected type's bounding box (hollow on point type, filled on area type); double-clicking it converts between them (Type › Convert To Area Type / Convert To Point Type), keeping the text and its styles in place. Variable fonts list every named instance as a style of their family (Figtree Light to Black and their italics, Bahnschrift, Segoe UI Variable), and the instance chosen is shaped, drawn, outlined and measured at its axis settings; PDF and SVG embed it as that instance. The Character panel's Variable Font sliders set each axis (see Fonts). Beyond Illustrator: inline graphics (`text.insertInline`, Type ▸ Insert Inline Symbol) set a document symbol in a run of type as one character that flows, wraps and justifies like a glyph (InDesign-style inline objects, e.g. mana symbols in card rules text): sized to a multiple of the font size, centred on the cap height, opening up tall lines, following Redefine Symbol; a character of its run's size for Character Alignment and Top-to-Top leading, placed by the bidi reordering in right-to-left text (a neutral U+FFFC); drawn on the canvas, kept as live text plus a `<use>` in SVG and as vector art in PDF; Backspace removes it whole. Hebrew and Arabic are laid out right to left with the Unicode bidirectional algorithm (embedded Latin and numbers keep their direction, lines put in visual order after wrapping) in point, area and path type, with caret, selection and arrow keys in visual order; each paragraph's direction comes from its first strong character unless Paragraph Direction sets it (Paragraph panel with Show Indic Options, `text.setFormat {direction}`), and new type aligns to the start of its direction. SVG export outlines right-to-left text. Arabic typefaces: builds made with a craft-fonts checkout that holds its Arabic families (Noto Sans Arabic, the Arabic fallback, plus Cairo, Tajawal, Almarai, IBM Plex Sans Arabic, Noto Kufi Arabic, Amiri, Alexandria, Fustat, Reem Kufi, Aref Ruqaa and Gulzar once craft-fonts adds them, storytold/craft-fonts#11; reLine truncated
|
||||
The Character panel menu's Show Font Height Options shows a Set Font Height Reference dropdown under Font Size (`text.setFormat` or `text.setRangeStyle` `{fontHeightReference}`). Each reference shows an icon of the height it measures before its name, in the open list and in the closed field (#6304): a frame around a letter for Em Box, a bar from the baseline to the top of a capital for Cap Height and of a lowercase x for x-Height, and a frame inset in the em square for ICF Box. With Em Box, the default, the font size is the size of the em square; with Cap Height, x-Height or ICF Box, the characters are set at the em size at which the font's OS/2 cap height, its x height or the height of its ideographic character face equals the font size. With a font that has no such value, or one outside 0.1 to 2 em, the size measures the em box. SVG, PDF and legacy `.ai` export and the CSS Properties rules write the em size the characters are drawn at, and DXF export writes 0.7 times that em size as each TEXT entity's height (group 40, the height of its capitals). Behavior reference: [Vary font height](https://web.archive.org/web/20251118174722/https://helpx.adobe.com/illustrator/desktop/design-with-text/edit-format-text/vary-font-height.html).
|
||||
The Every-line Composer composes a paragraph whose characters differ in line metrics (type size, font, leading or vertical scale, or an inline graphic taller than the text) in area type of any shape, rows, columns and text wrap included. In a frame that is not a rectangle, or with text wrap, each line it tries is measured where the lines above it put it, across the line's own height, so a taller line gets the room of the narrower part of the frame, or of the span beside a wrap object, that it reaches. When the frame cannot hold all of such a paragraph, the lines it holds are still composed with the whole paragraph, the lines past the frame's end measured as wide as the last line the frame holds (VectorCraft's own rule); they overflow or go on in the next threaded frame, which composes them again. Such a paragraph is broken with the Single-line Composer when the frame has no room for its first line or when the search passes VectorCraft's own limits. Behavior reference: [the help page](https://helpx.adobe.com/illustrator/desktop/design-with-text/edit-format-text/set-hyphenation-and-line-breaks.html), and for text that flows on between threaded objects, [the help page](https://helpx.adobe.com/illustrator/desktop/design-with-text/add-manage-text/create-text-threads-between-objects.html).
|
||||
The Every-line Composer composes a paragraph whose characters differ in line metrics (type size, font, leading or vertical scale, or an inline graphic taller than the text) in area type of any shape, rows, columns and text wrap included. In a frame that is not a rectangle, or with text wrap, each line it tries is measured where the lines above it put it, across the line's own height, so a taller line gets the room of the narrower part of the frame, or of the span beside a wrap object, that it reaches. When the frame cannot hold all of such a paragraph, the lines it holds are still composed with the whole paragraph, the lines past the frame's end measured as wide as the last line the frame holds (VectorCraft's own rule); they overflow or go on in the next threaded frame, which composes them again. Such a paragraph is broken with the Single-line Composer when the frame has no room for its first line or when the search passes VectorCraft's own limits. The Single-line Composer measures a line's room across the height of its tallest character too: a line that takes in a taller character is placed again and broken again in the room there. Behavior reference: [the help page](https://helpx.adobe.com/illustrator/desktop/design-with-text/edit-format-text/set-hyphenation-and-line-breaks.html), and for text that flows on between threaded objects, [the help page](https://helpx.adobe.com/illustrator/desktop/design-with-text/add-manage-text/create-text-threads-between-objects.html).
|
||||
A text wrap object's Offset may be negative as well as positive ([the help page](https://help.adobe.com/archive/en_US/illustrator/cs4/illustrator_cs4_help.pdf#page=307)). A negative Offset (to -1000 pt) shrinks the wrap object by that distance, measured from each edge itself and from the edges of its holes, so lines beside it, above it and below it run that far into it, and an object narrower than twice the distance no longer moves text aside. With Invert Wrap, a negative Offset keeps the text that far inside the object. These are VectorCraft's own rules for the shape of the shrunk object. Text Wrap Options, `object.textWrap.make` and `object.textWrap.options` and the MCP `text_wrap` tool take the negative value, and layout uses it (`crates/text/src/layout/region.rs` tests, `cmd::textwrap::tests::text_wrap_options_negative_offset_reflows_and_round_trips`).
|
||||
In area type of a shape other than a rectangle, each line's whole band, ascent to descent, stays inside the frame: where an edge pinches in within the band, the line ends at the narrowest point, and a line runs beside a hole that starts and ends within its band, not across it. In area type of any shape, a line also stays clear of a text wrap object that reaches into any part of its band, and inside an Invert Wrap object over its whole band (`crates/text/src/layout/region.rs` tests).
|
||||
In area type whose frame has several contours, a line runs across an edge two contours share only when their edges lie exactly on one line, so a gap between contours keeps lines from crossing it, even a gap one unit in the last place wide near the edge of the canvas; an edge divided by an anchor exactly on it still lets lines cross (`layout::region::separate_slanted_contours_keep_a_four_ulp_gap_near_canvas_limit`, `shared_slanted_edge_still_joins_near_canvas_limit`, `area_type_sets_no_line_across_a_four_ulp_gap_between_slanted_contours`).
|
||||
With Invert Wrap, the spans a line keeps inside a wrap shape of many parts (a comb of 500 teeth) are found by stepping through the line's spans and the shape's spans once for each piece of the band, so the work grows with the number of spans, not with its square (`crates/text/src/layout/region.rs` tests).
|
||||
With Invert Wrap and a positive Offset, a line uses all the room the wrap shape grown by the Offset (across and along) holds at every height of its band: beside a notch the Offset fills, the line reaches the grown edge, whatever the band's height, the slope of the notch's sides or the number of anchors on the shape (VectorCraft's own measure). Measuring a wrap shape of many parts (a comb of 500 teeth) takes a few dozen steps per part, not one per pair of parts. The measure stops after a fixed number of steps; a shape that needs more, for example one whose edges cross one another tens of thousands of times, has its band cut into at most 64 pieces instead, which keeps the line inside the grown shape but can leave it shorter than the grown shape allows (`crates/text/src/layout/region.rs` tests).
|
||||
Text Wrap Options › Offset is a distance field in the document's units: a bare number is in those units, a typed unit ("12 pt") is read as typed, and OK sends points. In a document in picas, a bare number follows Preferences › Units › Numbers Without Units Are Points as the other length fields do: it is in points while that preference is on (the default) and in picas while it is off (`dialogs::command::tests::text_wrap_offset_in_picas_follows_numbers_without_units_are_points`). An Offset typed outside -1000 to 1000 pt, VectorCraft's own range for the command, or text that doesn't read, is refused: the field flashes and the dialog stays open, whether Enter or a click on OK ends the entry; in every dialog drawn by the shared dialog window, a click on OK no longer confirms it when the distance field it takes the focus from refuses its text (`dialogs::command::tests::text_wrap_offset_field_takes_document_units_and_refuses_values_outside_its_range`). Behavior reference: [the help page](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/enter-values-in-panels-and-dialog-boxes.html).
|
||||
The Character panel's Small Caps, Superscript and Subscript buttons and the panel menu's items of the same names turn small caps and the superscript or subscript position on and off for the selected type, or for the text the Type tool has selected (`text.setFormat` or `text.setRangeStyle` `{smallCaps, position}`), in Document Setup's proportions. Turning Superscript on turns Subscript off, and turning Subscript on turns Superscript off. A button or item shows as on when the first selected character (at a caret, the character before it) has its attribute.
|
||||
The Character panel's Anti-aliasing Method dropdown, under Character Rotation, sets how the edges of the selected type objects are drawn as pixels (`text.setFormat {antiAlias}`), for the whole object, with each frame of a thread keeping its own method and graph labels keeping it when the graph is drawn again, on the canvas, in raster exports and when the type is rasterized. VectorCraft defines the methods: Sharp, the default, draws edges as before; None paints a pixel only where the type covers at least half of it; Crisp shows a pixel covered by a share c at `2c - 0.5`, and Strong shows it at `2c`, each kept between 0 and 1. SVG, PDF and EPS export are unchanged. Scores and hours unchanged.
|
||||
@@ -1353,6 +1367,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
The OpenType panel's Position menu lists Default Position, Superscript, Subscript, Numerator and Denominator, as [Format text with OpenType features](https://helpx.adobe.com/illustrator/desktop/design-with-text/special-characters-glyphs/format-text-with-opentype-features.html) describes; Superscript, Subscript, Numerator and Denominator set `sups`, `subs`, `numr` and `dnom` for the selected type and turn the other three off, and Default Position turns all four off. The menu shows Mixed when the characters it acts on differ, and an entry chosen then applies to all of them. These two rules are VectorCraft's own, as is setting the feature on type whose font lacks the glyphs, which then draws unchanged. The panel's menus and checkboxes change only their own features on each selected character, so characters keep their other OpenType features (`text.setStyle` and `text.setRangeStyle` `{featureChanges}`). Tests: `panels::opentype::tests`, `features::tests::numerators_and_denominators_are_kept_and_shaped`.
|
||||
The Glyphs panel's Show menu and panel menu have Alternates for Current Selection, as [Replace characters with alternate glyphs](https://helpx.adobe.com/illustrator/desktop/design-with-text/special-characters-glyphs/replace-characters-with-alternate-glyphs.html) describes. The grid lists the selected character's alternate glyphs from `GSUB` single and alternate substitutions of `aalt`, then `salt`, `ss01` to `ss20`, `swsh`, `cv01` to `cv99` and a few other alternate features, each glyph once. A double-click applies the feature that draws the variant, or a glyph choice if no supported feature draws it, as detailed below. The list uses the font of the character's text even when the panel browses another font, and the panel shows a note when the character has no alternates, its font is missing or no character is selected; these rules are VectorCraft's own. Native files keep a glyph choice with the face it was made in; another font or version draws the default glyph. Tests: `panels::glyphs::tests`, `tests::alternates`, `tests::textedit::a_glyph_alternate_replaces_one_character_through_undo_and_reopen`.
|
||||
The Glyphs panel's Alternates for Current Selection (#5514) applies the OpenType feature that draws the glyph to the selected character alone, as [Replace characters with alternate glyphs](https://helpx.adobe.com/illustrator/desktop/design-with-text/special-characters-glyphs/replace-characters-with-alternate-glyphs.html) describes (Alternates For Current Selection in the Show menu; double-click the glyph to replace the selected character). One deliberate difference from a literal reading: the text keeps the Unicode character and gains a character-style feature with a value (`salt=2`, `ss03`; `text.setRangeStyle {featureChanges}`) instead of taking an unencoded glyph in its place. The grid lists the alternates of the glyph the shaper makes for the character in its word (a medial letter shows its medial variants; the default glyph comes first and the current glyph is highlighted); a variant no supported feature draws there stays enabled as a replacement glyph (`text.setGlyphAlternate`, including positional alternates), and its tooltip says it may not join its neighbors; the default glyph takes the character's alternate features off again. Runs that differ only in their OpenType features are shaped as one piece of text, each run's features over its own characters, so the letters of an Arabic word keep their joining forms. Show › Entire Font also lists the glyphs no character maps, with the font's name for them (or `gid N`) and the feature that gives them. It applies the selected letter's contextual alternates the same way, and applies a glyph no feature reaches whose name does not belong to another letter as a glyph choice; other glyphs are dimmed with the reason. An Arabic presentation form picked there inserts its base letter. These rules are VectorCraft's own. Tests: `tests::glyph_alternates` in the text crate (a fixture font; Kufi Murabba PIIIX when it is installed), `panels::glyphs::tests` (including positional glyph choices, unlisted glyph name ownership, apply and Undo), `tests::textedit::feature_values_are_set_replaced_and_saved`.
|
||||
With a Type tool and exactly one character selected, the canvas shows that character's alternate glyphs in a row beside it, and a click on one replaces the character's glyph, as [Replace characters with alternate glyphs](https://helpx.adobe.com/illustrator/desktop/design-with-text/special-characters-glyphs/replace-characters-with-alternate-glyphs.html) describes ("Replace a character with on-canvas alternate glyphs"). The row shows at most five alternates, and an arrow at its end opens the Glyphs panel on Alternates for Current Selection when the character has more, as the [reference manual](https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf#page=479) describes. A click runs the command the panel's double-click runs, as one undo step, so a letter of an Arabic word keeps the word joined. These rules are VectorCraft's own: the row leaves out the glyph the character is drawn with and puts the default glyph first for a character drawn with an alternate; it stands under a character of horizontal type and on the right of a character of vertical type, or on the other side when the canvas ends there or the Contextual Task Bar is there; Preferences › Type › Show Character Alternates (`showCharacterAlternates`, on by default) turns it off. Tests: `canvas::alternates_bar::tests`, `tests::prefs::show_character_alternates_preference_is_on_by_default_and_saved`.
|
||||
The OpenType panel's Stylistic Sets menu offers `ss01`–`ss20` sets present in the selected text's font, using the font's custom labels when available and numbered labels otherwise. Sets can be combined and deselected individually. With mixed fonts, the menu shows the first selected character's font's sets and applies the feature tag to all selected text; a font without that set draws unchanged. The mixed-font rule is a VectorCraft design choice. Behavior reference: [Add stylistic sets to selected text](https://helpx.adobe.com/illustrator/desktop/design-with-text/special-characters-glyphs/add-stylistic-sets-to-selected-text.html) and the [OpenType specification](https://learn.microsoft.com/en-us/typography/opentype/spec/features_pt).
|
||||
`text.setStyle {stroke, strokeWidth}` sets the character stroke's color and weight of the selected type or of a range of its characters (the weight in document points, as `stroke.set` sets it), in the same undo step as the command's other changes. Tests: `tests::textedit::set_style_sets_the_character_stroke`.
|
||||
- **Paragraph alignment:** the shared Paragraph/Properties alignment row leaves every button unselected when the paragraphs it acts on differ. Auto resolves per paragraph; choosing an alignment uses the existing command. Headless paragraph_mixed_alignment_* regressions exercise mixed → Center → Undo, caret/uniform states, Unicode range boundaries, Auto/direction, split runs and grouped text. These regressions and full integration CI pass. Original captures confirm mixed → Center → Undo in the existing alignment-button layout. The [public Paragraph panel guide](https://helpx.adobe.com/illustrator/desktop/design-with-text/edit-format-text/paragraph-panel-overview.html) lists the seven controls, but does not specify mixed-state rendering. Other paragraph fields remain outside this change; scores and hours unchanged.
|
||||
@@ -1470,6 +1485,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
- **Gradient mesh keeps the object's outline (#2752):** Create Gradient Mesh, a Mesh tool click and Expand of a gradient to a mesh lay the mesh's border on the path's outline: each border edge is the piece of the outline between its two points, and where the outline bends through an anchor (a star's points, an L-shape's inner corner, a rounded rectangle's arcs) no single curve follows, the mesh takes a line through that anchor, up to 256 each way. Holes and other subpaths of a compound path are still left out. Public reference: [About mesh objects and Create mesh objects, CS3 user guide, pages 184 to 185](https://help.adobe.com/archive/en_US/illustrator/cs3/illustrator_cs3_help.pdf) (mesh lines carry anchor points as well as mesh points). Tests: `a_mesh_keeps_the_outline_of_every_shape` and `a_mesh_takes_lines_only_where_the_outline_needs_them` in `crates/doc/src/live.rs`, `a_mesh_tool_click_keeps_a_stars_points` in `crates/engine/src/tests/live.rs`. Scores and hours unchanged.
|
||||
- **A point on a mesh's outline is on the mesh:** a point exactly on the outline of a gradient mesh (within a millionth of a point) locates on the edge it lies on, on all four sides alike and with no tolerance, as it already did on the top and left edges, so `object.mesh.addLine` and Create Gradient Mesh `at` a point on the bottom or right edge add their lines there instead of reporting the point outside, and the Eyedropper samples the mesh's color there; a point just outside still needs `tolerance`. Tests: `mesh_locate_takes_a_point_on_any_side_of_the_outline` in `crates/doc/src/live.rs`, `mesh_add_line_exactly_on_the_edge_needs_no_tolerance` in `crates/engine/src/tests/live.rs`. Scores and hours unchanged.
|
||||
- **Several mesh points at once (#4207, #4208, #4170):** the Mesh tool and Direct Selection pick several points of a gradient mesh or mesh envelope: Shift-click adds a point or takes a picked one away, Direct Selection's marquee picks the points inside it (Shift toggles them) and selects their meshes, and its click on a mesh line picks the line's two ends and one inside a patch the four points around it. The picked points show filled; dragging one moves them all as one undo step and the arrow keys nudge them (`object.mesh.movePoints {id, points, dx, dy}` or `{items, dx, dy}`), and a click on one of several picked points picks it alone. A solid fill colour (`paint.setFill`: Color panel, Swatches, Eyedropper) recolours every picked point, and the Transparency panel's Opacity fades them instead of the object, the panel showing their opacity (blank when it differs); `object.mesh.setPointColor` takes `points` or `items`. Public reference: [Edit mesh objects](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/create-and-edit-meshes/edit-mesh-objects.html) (Shift selects multiple mesh points; a fill colour colours the selected point), [Macworld, gradient mesh](https://www.macworld.com/article/202693/gmesh2.html) (Direct Selection: a mesh line selects the points at both ends, a patch the points around it, Shift-click adds or removes points), [Peachpit](https://www.peachpit.com/articles/article.aspx?p=1638270) (each mesh point can have its own colour or transparency). Tests: `shift_clicks_pick_mesh_points_that_drag_and_nudge_together` and `direct_selection_picks_mesh_points_by_marquee_line_and_patch` in `crates/tools/src/meshedit.rs`, `picked_mesh_points_take_the_fill_opacity_and_drag_together` in `crates/engine/src/tests/editcolors.rs`, `mesh_points_move_and_colour_together` in `crates/engine/src/tests/live.rs`. Scores and hours unchanged.
|
||||
- **Picked mesh points in the panels** (VectorCraft's own rule): with points of a gradient mesh picked by the Mesh tool, Direct Selection or the Lasso, the Fill proxy, the Color panel and the Color Wheel show the first picked point's color, so their sliders keep the color a drag sets, and "?" shows when the picked points' colors differ. The Control bar shows the first picked point's opacity. Tests: `the_fill_proxy_shows_the_picked_mesh_points_color`, `the_fill_proxy_follows_where_the_fill_goes_with_an_appearance_row_active` and `the_fill_proxy_counts_picked_mesh_points_beside_other_objects` in `crates/engine/src/tests/xform.rs`, `picked_mesh_points_are_the_color_the_panel_shows_and_edits` in `crates/ui-egui/src/panels/color/tests.rs`, `picking_mesh_points_shows_their_opacity` in `crates/ui-egui/src/panels/transparency.rs`. Scores and hours unchanged.
|
||||
- **Image Trace Flat Logo mode:** a fourth mode beside Black and White, Grayscale and Color, for flat-colour logos. Each pixel is read as a blend of the logo's colours (found automatically or named), the blend is interpolated smoothly and every outline is placed where two colours are equally present, so edges are accurate to a fraction of a pixel. Outlines are then cleaned: corners the blur rounded are put back, near-straight runs and near-circular arcs become exact lines and arcs, the rest is fitted with as few Béziers as the tolerance allows, touching colours overlap by a hair so no gap opens, and an outline that strays from the raw contour is fitted plainly instead. Gradients and photos are refused with advice to use Color. Line art whose only solid area is white paper (strokes a pixel or two wide) takes its colours from the strokes' cores, with the lighter shades along a stroke's anti-aliased edge folded into its ink; a page whose ink (a channel at least 48 below white) covers under 1% of it traces to nothing, as blank paper does. *Measured* (a local experiment, not run in CI): a flat-colour logo's vector original was rendered down to a soft 199 × 100 px transparent PNG, traced, and the result compared with the original at 1600 px wide. The built-in colour presets (6 Colors, 16 Colors, High Fidelity Photo, Low Fidelity Photo) had a mean edge error of 2.5 to 3.4 px and region overlap of 0.88 to 0.91; Flat Logo had 0.78 px and 0.966 (0.48 px and 0.975 from a crisp source), in about 0.1 s. Limits: flat-colour art only; needle-thin sharp tips are shortened by about 1.7 source pixels because the blur erases them; it works at no more than 1024 px on the long side (larger images are averaged down first); only one logo family has been scored against a vector original.
|
||||
- **Image Trace, Flat Logo named colors only:** with `logoColors` named, `"logoWhite": false` traces those colors only, so white areas take the nearest of them and no white is added; a named white is kept, and enclosed transparent areas stay holes; code-drawn tests in `crates/trace` and `crates/engine`.
|
||||
- **Image Trace, Flat Logo flat-art check with named colors:** with `logoColors` named, whether the image is flat art is judged by its own colors, as many as are named, with white, or as the Colors setting gives, whichever is more. Named colors 20 levels off a flat badge's colors still trace it, a hatch on a light ground gives the same result with close and far named colors, a gradient's refusal score does not depend on how far the named colors are from it, and areas of colors that were not named are traced in the named colors instead of being refused; code-drawn tests in `crates/trace`.
|
||||
@@ -1496,6 +1512,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
Live Paint Bucket Options has Cursor Swatch Preview, as the [help page](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/learn-painting-basics/paint-with-the-live-paint-bucket-tool.html) lists: with the Bucket selected, the active fill or stroke shows above the pointer between the color swatches before and after it in the Swatches panel, and the Left and Right arrow keys pick the swatch before or after it, as the page describes. The selected art keeps its paint. As VectorCraft's own rules, the option is on at first, the arrows step the stroke when the Stroke proxy is in front, they wrap around at the ends and still step with the preview off, a color that is no swatch shows alone until Right picks the first swatch or Left the last, and the arrows do nothing during a fill drag or with no color swatch. Evidence: `tests::build::{live_paint_bucket_arrow_keys_step_the_active_paint_through_the_swatches, live_paint_bucket_arrow_keys_handle_unmatched_paint_few_swatches_and_drags, live_paint_bucket_arrow_keys_pass_swatches_of_the_same_color_for_fill_and_stroke, swatch_arrow_keys_leave_modified_arrows_to_the_shortcuts}`.
|
||||
Live Paint Make preserves the front-most covering source's fill when compound paths share a curved boundary, and Expand keeps the face fills. Regression evidence: `planar::tests::coincident_curves_keep_their_source_faces` checks source order, winding, fill rules and nearby boundaries; `tests::build::live_paint_make_and_expand_keep_abutting_compound_colors` checks native compound paths, Make, Expand and Undo/Redo. This preserves VectorCraft's source-fill rule without changing arrangement precision.
|
||||
Object › Live Paint › Expand keeps the faces and edges that draw on the canvas, with all their fill and stroke rows, so the expanded paths look as the painted group did ([Create Live Paint groups](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/learn-painting-basics/create-live-paint-groups.html)). As VectorCraft's own rule, a face or edge draws when it is shown, its opacity is above 0, and any of its fill or stroke rows is shown, has paint and an opacity above 0 (a stroke also needs a weight above 0), whichever row is on top: a painted lower row under an unpainted top row is kept, and a part whose only painted row is hidden is removed. Merge copies the fill and stroke rows, visibility, opacity and blending mode of each face that draws by this rule, and of each edge, to the rebuilt parts, with their gradients kept at their fit on the old outline and without the strokes' pen pressure, tilt, bearing and rotation. Evidence: `tests::build::{live_paint_expand_keeps_the_faces_and_edges_that_draw, live_paint_merge_carries_the_faces_that_draw, live_paint_merge_leaves_pen_pressure_behind, live_paint_merge_keeps_the_fit_of_carried_gradients, live_paint_merge_keeps_the_visibility_opacity_and_blending_of_carried_parts}`.
|
||||
`livePaint.info` lists every fill and stroke row of each face and edge, bottom first, with its paint, opacity, visibility, weight for a stroke, and whether it draws by the rule above, beside the top fill, stroke and weight it already reported. Evidence: `tests::build::live_paint_info_lists_every_appearance_row`.
|
||||
Live Paint Gap Options (Object › Live Paint › Gap Options…, `livePaint.gapOptions`): with Gap Detection on, paint stops at the gaps that run from a loose end of a path to the nearest path, up to Small (3 pt), Medium (6 pt), Large (12 pt) or a custom size; Close Gaps With Paths adds an unpainted path across each gap; Preview applies the options live and draws the gaps in the Gap Preview Color. The options are saved, copied and undone with the group, and Merge keeps the bottom group's options when its Gap Detection is on, or else turns Gap Detection on with Small when another merged group has it on. When Gap Detection is off in every merged group, it stays off.
|
||||
View › Show Live Paint Gaps (`view.livePaintGaps`) draws the gaps of the selected Live Paint groups up to their Paint Stops At size, each in its group's Gap Preview Color, until Hide Live Paint Gaps or Hide Edges hides them ([Live Paint gaps](https://web.archive.org/web/20260105111201/https://helpx.adobe.com/illustrator/desktop/paint-and-fill/learn-painting-basics/find-and-close-gaps-in-live-paint-groups.html)).
|
||||
Double-clicking the Live Paint Selection tool opens its Tool Options ([Live Paint Selection tool options](https://web.archive.org/web/20250904012025/https://helpx.adobe.com/illustrator/using/selecting-objects.html)): with Select Fills off, a click selects an edge instead of a face; with Select Strokes off, Alt-click selects a face instead of an edge; Color and Width set the color and width of the highlight on the face or edge under the pointer (red and 4 px by default). The options last across tool switches and are saved with the preferences (`tool.setOption {tool: "livePaintSelection"}`).
|
||||
@@ -1504,6 +1521,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
As VectorCraft's own rule, `tool.setOption` for the Live Paint Bucket and the Live Paint Selection tool, chosen or not, checks every value before it sets any: a switch that is not `true` or `false`, a `color` that is not an RGB color or a layer color's name, or that has an alpha part, a `width` that is not a number and an option the tool does not have give an error naming the option, and nothing is set or saved. A `width` outside 1 to 20 px is still set to the nearest end of that range. Saved settings that hold an invalid value still load, and the tool keeps its default for that option. Evidence: `tests::build::{live_paint_tool_options_refuse_invalid_values_and_change_nothing, live_paint_tool_options_take_rgb_colors_and_clamp_the_width, live_paint_tools_load_saved_settings_with_invalid_values}`.
|
||||
As VectorCraft's own rule, `tool.setOption` for the Shape Builder, chosen or not, checks every value the same way: a switch that is not `true` or `false`, a `pickColorFrom` or `selection` that is not one of its names, a `gapLength` that is not a number, a `highlightColor` that is not an RGB color or a layer color's name, or that has an alpha part, and an option the tool does not have give an error naming the option, and nothing is set or saved. A `gapLength` outside 0 to 72 pt is still set to the nearest end of that range. Evidence: `tests::build::{shape_builder_tool_options_refuse_invalid_values_and_change_nothing, shape_builder_tool_options_take_valid_values_and_clamp_the_gap}`.
|
||||
A drag of 3 screen pixels or more with the Live Paint Selection tool draws a marquee and selects the faces and edges it touches, partly enclosed ones included, and a Shift-drag adds them to the selection or removes them from it ([Modify Live Paint groups](https://web.archive.org/web/20261006115247/https://helpx.adobe.com/illustrator/desktop/paint-and-fill/learn-painting-basics/modify-live-paint-groups.html)). A click and a marquee change the selection on release, and Escape before the release leaves the selection as it was. Locked Live Paint groups, those on a locked layer or artboard, and in isolation mode those outside the isolated art are not highlighted or selected.
|
||||
A double-click with the Live Paint Selection tool on a face selects it and the faces of its group that no stroked edge parts from it ([the help page](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/learn-painting-basics/modify-live-paint-groups.html)), and on an edge selects it and the edges joined to it end to end that have its stroke paint ([the help page](https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html)); Shift-double-click adds them to the selection or removes them from it. Triple-click is not handled yet.
|
||||
When the object the Blend tool picked first is deleted or undone away before the second click, the next click on an object picks that object first instead of doing nothing. Regression tests: `blend_tool_picks_again_when_its_first_pick_is_gone` in `meshblend.rs` and `the_blend_tool_picks_again_when_its_first_pick_is_deleted` in `tests/blendopts.rs`.
|
||||
Window › Blend opens the Blend panel: Make, the selected blend's Spacing and Orientation (with no blend selected, the options new blends start with), Reverse Front to Back, Reverse Spine, Replace Spine, Expand and Release, each running its Object › Blend command. Make is dimmed until two or more objects are selected. Spacing and Orientation are dimmed until a blend or two or more objects are selected, and the other buttons are dimmed until a blend is selected.
|
||||
The Blend panel's Create Spine menu (Auto, Always, Never; `object.blend.createSpine`) sets whether new blends get a spine, from the Blend tool, Make and `object.blend.make` alike ([Blend panel overview](https://helpx.adobe.com/illustrator/desktop/manage-colors/apply-transparency-and-blending/blend-panel-overview.html)). Auto and Always give every new blend a straight spine, as before; Never makes blends without one, which keep their steps on the straight lines between the keys, have Type and Ramp dimmed, refuse Reverse Spine and spine edits, release without a spine path, and get a spine from Replace Spine. The setting is kept with the preferences and leaves blends already made as they are; Auto as the starting value and keeping the setting across sessions are VectorCraft's own rules. Builds on #5177 by adambelis. Evidence: `tests::blendopts::{create_spine_sets_whether_new_blends_get_a_spine, a_blend_without_a_spine_has_none_to_edit_reverse_ease_or_release, whether_a_blend_has_a_spine_is_saved_and_old_blends_have_one}` and `panels::tests_blend::create_spine_sets_what_new_blends_get_whatever_is_selected`.
|
||||
@@ -1603,6 +1621,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
Outline Object on an image's own fill or stroke follows the outline of the image's opaque area, and the image's frame when the image has no transparency. Path effects apply to a fill or stroke added to a bitmap object ([archived reference manual, page 561](https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf#page=561)), and with Outline Object such a stroke follows the boundary of the art when the image has transparent areas and the image's frame when it has none ([CreativePro article on strokes for placed images](https://web.archive.org/web/20250815214529/https://creativepro.com/add-strokes-placed-images-illustrator/)). VectorCraft's own rules: the opaque area is the pixels at least 50% opaque, and its outline is traced as Image Trace's Black and White mode traces at threshold 128 and fitted with curves. Evidence: `tests::imageoutline` (vectorcraft-effects), `opaque::tests` (vectorcraft-trace), `tests::containers::an_images_stroke_with_outline_object_follows_its_opaque_area` and `tests::containers::an_images_outline_object_stroke_exports_selects_and_measures_along_its_opaque_area` (vectorcraft-engine), `tests::objectfx::an_images_outline_object_stroke_follows_new_pixels_under_the_same_key` (vectorcraft-render).
|
||||
A geometry effect on one of type's own fills or strokes reshapes the whole outline that the fill or stroke paints, on the canvas and in exports; PDF, SVG, EPS and the other vector exports write such type as paths. On type that holds inline graphics, those effects are drawn and exported only when the type has a geometry effect or perspective of its own.
|
||||
A geometry effect on a symbol instance's fill reshapes the filled shapes of the symbol's art and leaves their strokes as they are; one on the instance's stroke reshapes the stroked shapes and leaves their fills as they are. The shapes keep their colors. Only the instance's topmost fill and topmost stroke count, and only while they are visible with an opacity above 0. The canvas and Object › Expand Appearance use the same art, SVG and PDF export bake the same shapes, and Expand Appearance turns the instance into an editable group in one undo step. A group's own fills and strokes in the art take the effects too. An instance inside the art passes the effects on to its own art, and a dynamic symbol's instance reshapes the fills and strokes it paints on the art. How the effects map onto the symbol's art is VectorCraft's own rule. The help page <https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/apply-and-modify-effects.html> describes effects on one fill or stroke, and the help page <https://helpx.adobe.com/illustrator/desktop/manage-objects/arrange-objects/expand-objects.html> describes Expand Appearance (engine `expand::a_symbol_instance_fill_effect_reshapes_its_filled_art_and_expands`, `a_symbol_instance_stroke_effect_reshapes_its_stroked_art_and_expands`, `a_stroke_effect_reshapes_a_stroke_a_dynamic_instance_adds`, `a_fill_effect_reshapes_the_fill_of_a_group_in_the_art`, `only_the_topmost_visible_instance_fill_reshapes_the_art`, `a_nested_symbol_instance_takes_the_outer_fill_effect`, `export_bakes_a_symbol_instance_fill_effect`, `a_fill_effect_on_an_instance_of_a_symbol_that_holds_itself_ends`). Existing documents with a geometry effect on a symbol instance's fill or stroke draw differently: before, the effect drew nothing.
|
||||
Live effects inside a symbol's art (geometry effects, color adjustments and the rest that export bakes) are written where each instance places the art in PDF, print, EPS and DXF, as the canvas draws them: the art is placed first and its effects are applied after, so an instance that scales its art does not scale the distance a Transform effect moves it. Symbols nested in the art, a dynamic symbol instance's own paint changes and the stain an instance's fill gives its art are kept, and the art is stained before its effects apply. A linked instance's PDF link covers its art where the effects draw it. A symbol whose art holds itself stops at the nesting limit, and the symbols' own art keeps its effects. An instance stays an instance in these exports when the objects its art makes once baked (the copies a Transform effect makes included) would take the export's placed symbol art past 16,000,000 objects, or when its baked art would draw deeper than the 128 levels a document may draw; these are VectorCraft's own limits. Art baked for an instance that then stays an instance still counts toward that limit, and while an instance's art bakes, the art's own objects are held in the limit for the instances nested in it. Instances the export leaves out (hidden ones, those in hidden groups, on template layers, and on hidden layers or layers that do not print when the export leaves those out) are not placed and do not count toward that limit. Before, these exports wrote the art without its effects (effects `bake::placing_symbols_bakes_their_art_where_each_instance_places_it`, `placing_symbols_reaches_the_art_of_nested_instances`, `placing_a_symbol_that_holds_itself_stops`, `placing_symbols_keeps_dynamic_instances_changes`, `placing_symbols_keeps_the_instances_stain`, `placing_symbols_counts_the_baked_art`, `placing_symbols_counts_nested_art_once`, `placing_symbols_holds_the_outer_art_while_it_bakes`, `placing_symbols_counts_the_art_it_drops`, `placing_symbols_counts_art_dropped_for_depth_against_later_baked_art`, `placing_symbols_keeps_the_baked_art_within_the_drawn_depth`, `placing_symbols_skips_instances_the_export_leaves_out`; doc `depth::tests::drawn_heights_measure_objects_outside_the_layers`; PDF, print, EPS and DXF `symbol_art_effects_are_written_where_they_draw`, `symbol_art_effects_print_where_they_draw`; PDF `a_stained_instance_keeps_its_stain_when_its_art_has_effects`, `a_linked_instance_keeps_its_link_when_its_art_has_effects`).
|
||||
A raster effect (Drop Shadow, Outer Glow, Gaussian Blur and the other effects that paint pixels) on a symbol instance's topmost fill draws on each filled shape of the symbol's art, and one on its topmost stroke draws on each stroked shape, after any geometry effects listed before it, under the same rules as geometry effects: only a visible fill or stroke with an opacity above 0 counts, a group's own fills and strokes in the art take the effect, and an instance inside the art passes it on. Each shape gets its own shadow or glow, which is VectorCraft's own rule. The canvas, Use Preview Bounds and the drawn bounds, SVG and PDF export draw it, and Object › Expand Appearance is enabled for such an instance and makes the effect an image at the document's raster effects resolution, in one undo step (engine `expand::a_symbol_instance_fill_shadow_shadows_its_filled_art`, `a_symbol_instance_stroke_shadow_shadows_only_its_stroked_art`, `a_symbol_instance_fill_shadow_follows_the_fill_offset_before_it`, `a_nested_symbol_instance_takes_the_outer_fill_shadow`, `export_draws_a_symbol_instance_fill_shadow`). Existing documents with a raster effect on a symbol instance's fill or stroke draw differently: before, the effect drew nothing.
|
||||
The Appearance panel's inline effect editor labels each parameter as the effect dialogs' generic fields do, without the colon ("Max. Radius", "Channel 1", "Create New Fields by"). Roughen's and Zig Zag's Points, Offset Path's Joins, Inner Glow's Source and the menus of Radial Blur, Smart Blur, Sprayed Strokes, Glass, Mezzotint, Halftone Pattern, Grain, Texturizer and De-Interlace are dropdowns with the dialog's labels that send the dialog's values, and a plug-in's choice is a dropdown of the plug-in's values.
|
||||
Revolve's edge, Extrude & Bevel's bevel, every Warp style's orientation, Rasterize's Color Model, Background and Anti-aliasing and the channel of Levels and Curves are dropdowns too, with the labels their own dialogs show. `effect.apply` and `effect.setParams` refuse a Levels or Curves `channel` other than `rgb`, `red`, `green` or `blue` (or `r`, `g` and `b`, in any letter case).
|
||||
@@ -1689,6 +1708,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
A gap between glyphs of two sizes is measured against the smaller one, so a word set beside a much larger one with no space glyph between them (a browser's margin between two sizes, as in `≤ 4` and a small `hours`) keeps its word space (#3623).
|
||||
SVG import's style cascade, used for hidden objects, non-scaling strokes and type, tests each element only against the `<style>` rules for its id, its classes and its element name, and the rules whose selector ends in none of these (`*`, `[x]`).
|
||||
SVG import places right-to-left point type and type on a path as [SVG 2's `text-anchor`](https://www.w3.org/TR/SVG2/text.html#TextAnchoringProperties) says: with `direction: rtl`, `start` puts the right edge of the text at its position (on a path, the text ends at `startOffset`) and `end` puts the left edge there. Each line and each absolutely placed chunk is anchored by the `text-anchor` and `direction` of the element holding its first character, a `<tspan>`'s own included, and each line starts at its own `x`. An absolutely placed chunk is anchored by the left and right edges of its glyphs as they are drawn, so a chunk of several right-to-left characters, whose first character is drawn at its right, sits on its anchor too. A letter-spaced right-to-left line keeps the tracking of all its letters inside the advance it anchors (`rtl_point_text_start_and_end_use_directional_edges`, `rtl_type_on_a_path_starts_at_its_directional_edge`, `rtl_letter_spaced_lines_stay_on_their_anchor`, `rtl_lines_use_each_chunk_first_character_direction_and_anchor`, `each_line_starts_at_its_own_x`, `absolutely_placed_chunks_use_their_own_rtl_anchor` and `absolutely_placed_rtl_chunks_of_several_characters_anchor_by_their_visual_edges` in `crates/svg/tests/it/import_text.rs`).
|
||||
SVG import puts each absolutely placed character of right-to-left text on its own `x`, as [SVG 1.1's text chunks](https://www.w3.org/TR/SVG11/text.html#TextLayoutIntroduction) require, also when the characters run right to left on a later line: in `<text direction="rtl" font-size="20">`, `<tspan x="100 160" y="80 80">אב</tspan>` after a first line puts the right edges of `א` and `ב` at 100 and 160, where import put the right edge of `א` at 393.48 before. Chunks that overlap keep their own anchors, and characters stretched by `lengthAdjust="spacingAndGlyphs"` land on their `x` too. A left-to-right character drawn between two absolutely placed right-to-left characters leaves the one after it where the line puts it, and the import warns about it (`absolutely_placed_right_to_left_characters_sit_on_their_own_x` in `crates/svg/tests/it/import_text.rs`).
|
||||
SVG import places type on a path of one closed subpath as [SVG 2's `startOffset` attribute](https://www.w3.org/TR/SVG2/text.html#TextPathElementStartOffsetAttribute) describes: text anchored to start before the path's start point, or offset past its end, wraps around the path, so text with `text-anchor="end"` at `startOffset` 0 ends at the start point, and a negative `startOffset` counts back from the end. Text longer than the loop draws its first characters whatever its anchor. A path of several subpaths, and an open path, still start the text at the path's start or end (`text_on_a_closed_path_wraps_past_the_path_start` in `crates/svg/tests/it/import_text.rs`).
|
||||
SVG import reads the bidi embedding of a `<tspan>`, `<textPath>` or `<a>` inside a `<text>` as [SVG 1.1's bidi section](https://www.w3.org/TR/SVG11/text.html#RelationshipWithBi-directionality) describes: with `unicode-bidi: embed` its characters take its `direction` as their Character Direction, an element with `normal` stays in its parent's embedding, and the `<text>` keeps its own paragraph direction, so a run that SVG export writes with `direction` and `unicode-bidi="embed"` opens with its Character Direction again. Character Direction holds one level of embedding, so `bidi-override`, `isolate` and `isolate-override` are imported as embeddings in their `direction`, `plaintext` as an embedding in the direction of its first strong character, and an embedding inside another as an embedding of its own, each with an import warning. With `unicode-bidi: plaintext` on the `<text>`, each of its paragraphs runs, and each chunk is anchored, in the direction of its first strong character (`a_tspan_bidi_embedding_becomes_its_character_direction`, `unicode_bidi_is_not_inherited_and_reads_from_the_cascade` and `unicode_bidi_values_the_text_model_cannot_hold_are_reported` in `crates/svg/tests/it/import_text.rs`; `character_direction_reads_back` in `crates/svg/tests/it/text_layout.rs`).
|
||||
A `.svgz` file copied in a file manager pastes as its art, as a copied `.svg` file does.
|
||||
@@ -1703,10 +1723,12 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
A PDF-compatible `.ai` saved with Include Editing Data for Other Apps writes point type, area type and type on a path as type in its editing copy, and objects next to it keep their own transparency (`crates/eps/src/ai_editing/tests.rs`, `cmd::fileio::tests_pdfedit::type_comes_back_from_the_editing_copy`; [file-format-parity.md](file-format-parity.md) lists what is written as outlines).
|
||||
A PDF-compatible `.ai` saved with Include Editing Data for Other Apps keeps the document's variables, data sets and the bindings of objects to variables in its editing copy, in the form the variable library reader above reads, so they come back when the file is opened. Bindings to layers, to type written as outlines, to graphs and to linked images written as other objects, data set values of graphs, and variables, data sets, bindings and values past the writer's limits are left out with a warning (#6024; `crates/eps/src/ai_editing/tests.rs` `variables_data_sets_and_bindings_are_read_back`; `crates/eps/src/ai_editing/writer/variables.rs` lists what is left out).
|
||||
A PDF-compatible `.ai` saved with Include Editing Data for Other Apps keeps each wrap object's Text Wrap Options in its editing copy: the Offset, positive or negative, and Invert Wrap ([the help page](https://helpx.adobe.com/illustrator/desktop/design-with-text/add-manage-text/wrap-or-unwrap-text-around-objects.html)), in the form the `.ai` reader reads them (`text_wrap` in `crates/eps/src/import/ai/read/document.rs`), so they come back when the file is opened. An offset past the -1000 to 1000 pt the reader keeps is written as the nearer end of that range. On a large canvas the offset is written at the art's scale and comes back at its size. Art the writer draws for an object, such as a blend's steps or a symbol instance written as its art, has only that object's options, and a clipping path written as its fills and its strokes has its options once (`crates/eps/src/ai_editing/tests.rs` `text_wrap_options_are_written_and_read_back`, `drawn_art_keeps_only_its_objects_text_wrap`, `text_wrap_offsets_on_a_large_canvas_come_back_at_their_size`, `text_wrap_options_of_type_and_envelopes_are_read_back`, `a_clipping_path_written_as_its_paint_keeps_one_text_wrap`).
|
||||
Type written as its outlines in the editing copy still wraps area type by its bounds, not by its glyphs, when the file is opened: the outlines' group ends with an unpainted rectangle at the type's bounds that carries its Text Wrap Options, in the form the `.ai` reader reads a path's options (`text_wrap` in `crates/eps/src/import/ai/read/document.rs`), and the group keeps the type's name (`crates/eps/src/ai_editing/tests.rs` `type_written_as_outlines_keeps_wrapping_by_its_bounds`).
|
||||
In a `.ai` or EPS opened from its editing data, type has its text object's opacity, blend mode and knockout shape flag, whether it is made from the file's text document or taken from the page, and type made from the text document takes its text object's lock. Where such type has transparency and comes in with other art (the rest of its look, or page type and strokes that go with it), a group of them has it. Where the page draws its type, or the strokes around it, with transparency that is neither its text object's nor its text object's combined with that of the objects around it, the page's type and strokes keep their own instead (`crates/eps/src/import/tests_native.rs`). Where the page draws type of no text object over text objects made from the text document, with their words in any case, that type is theirs as the page draws it and is left out; the page's other type of no text object goes only to text objects whose type the text document can't make, or else is left out with a warning.
|
||||
`.ai` editing-data import restores the document's listed graphic styles in panel order and links objects that use a listed style; unsupported appearances keep their drawn look (`crates/eps/src/import/ai/tests.rs`).
|
||||
A `.ai` or EPS graphic style library, whose editing data holds the styles and their list but no layers, opens with those styles in list order. Other Library… loads another document's graphic styles ([Apply graphic styles](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-graphic-styles/apply-graphic-styles.html)) and lists such a library's styles in a library panel. A `.ai` or EPS read as its PDF part or page because its layers can't be used also gets the styles of its list in place of the default ones (`crates/eps/src/import/tests_native.rs`, `cmd::fileio::tests_aiimport::a_graphic_style_library_in_a_ai_file_without_layers_loads_its_styles`).
|
||||
A `.ai` or EPS symbol library, whose editing data holds symbol definitions and their list but no layers, opens with those symbols in list order, each with its registration point. Other Library… in the Symbols panel's Symbol Libraries Menu imports the symbols of the file you pick ([Create or import symbol libraries](https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/create-or-import-symbol-libraries.html)) and lists such a library's symbols in a library panel. A `.ai` or EPS read as its PDF part or page because its layers can't be used also gets the symbols defined before its layers (`crates/eps/src/import/tests_native.rs`, `crates/eps/src/import/ai/tests.rs`, `cmd::fileio::tests_aiimport::a_symbol_library_in_a_ai_file_without_layers_loads_its_symbols`).
|
||||
In a large canvas `.ai` or EPS ([Large canvas FAQ](https://helpx.adobe.com/illustrator/desktop/add-and-import-files/start-a-new-file/large-canvas-faq.html)), or a `.ai` whose page is in larger units, opened from its editing data, VectorCraft reads the symbol definitions in the same units as the layers. When the file opens at its full size, each symbol's art, strokes and effects are scaled with the layers, and each instance keeps its own scale and rotation and draws where and as large as before. A new instance comes in at the symbol's full size, the size of an instance at 100% in the file. A symbol library from such a file comes in at the same size, and opacity masks on the layers that don't move with their object are scaled with the layers too. Editing data that VectorCraft wrote keeps its symbols and those masks at their own size, as its `.ai` save writes them (`tests_native::a_large_canvas_eps_keeps_its_symbols_at_the_pages_size`, `a_large_canvas_ai_keeps_its_symbols_at_the_pages_size`, `a_large_canvas_ai_vectorcraft_wrote_keeps_its_symbols_at_their_own_size`, `a_symbol_library_in_larger_units_comes_in_at_the_pages_size`, `build::candidate_tests::scaling_the_symbols_keeps_their_instances_in_place`, `scaling_a_read_document_scales_unlinked_opacity_masks`).
|
||||
A `.ai` or EPS opened from its editing data whose text document makes the type of every text object that shows takes all its type from the text document: each text object stays in its own group, frame and layer, the page's type isn't matched with them, a file of more than 5,000 text objects still opens with its layers, and type the page draws differently (in another font) keeps the layers, with a warning. A line break inside a paragraph stays a line break in it (`crates/eps/src/import/tests_native.rs`, `crates/eps/src/import/ate.rs`).
|
||||
In SVG export without Fewer `<tspan>` Elements, each character of live type that justification or Mojikumi moves (the letter gaps of a Justify All line without word spaces, the gaps between the characters of a justified Japanese line, closed-up punctuation, the space between Japanese and Latin letters) starts its own positioned `<tspan>`, and type scaled horizontally on a justified line is stretched to its own width (`crates/svg/tests/it/text_layout.rs`).
|
||||
To find those characters, SVG export lays a type object out a second time only when the second layout can differ from the first: point type with Line-end Punctuation Half Width and no Japanese punctuation or letters, the setting new type gets, is laid out once. Exporting 5,000 such objects takes a median of 109.4 ms instead of 171.5 ms on Windows 11, with the same SVG (`crates/svg/src/export/text/tests.rs`).
|
||||
@@ -1745,6 +1767,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
Export As PDF with Use Artboards off also opens the Save PDF dialog, without its Artboards section, and writes one page of the visible art's bounds with the dialog's options (`document.exportPdf {useArtboards: false}`; `crates/ui-egui/src/dialogs/tests_export.rs`, `crates/engine/src/cmd/fileio/tests_pdf.rs`).
|
||||
`document.exportSelection` run without params (a shortcut) takes the same route after its save panel: a picked PDF opens the Save PDF dialog without its Artboards section, and SVG, the raster formats, EPS, DXF, text and exporter plug-ins with parameters open their options, whose OK writes the selection alone, cropped to it, with the chosen options (`crates/ui-egui/src/dialogs/tests_export_selection.rs`).
|
||||
A `.ai` export with Use Artboards off writes one page of the visible art's bounds without the native document or the editing copy for other apps, with a warning, so the file does not reopen with one artboard in place of the document's; without PDF content it is refused (`crates/engine/src/cmd/fileio/tests_pdfedit.rs`).
|
||||
That page, and an HP-GL plot of the art's bounds, are measured on the art the file draws: non-printing layers the PDF or `.ai` file leaves out do not make it larger, and nor do the non-printing layers, objects at 0% opacity, placed images, clear gradient meshes and unpainted paths a plot leaves out; Export As refuses an HP-GL plot of nothing it draws before the save dialog (`crates/engine/src/cmd/fileio/tests_pdf.rs`, `crates/engine/src/cmd/fileio/tests_hpgl.rs`, `crates/ui-egui/src/dialogs/tests_export.rs`).
|
||||
PDF export warns when a PDF/X file has no bleed on a side where the document's bleed has one, and writes the file as asked.
|
||||
In a PDF without a standard, the warning for a page longer than 14,400 pt written with a `UserUnit` names "Write pages longer than 200 in at full size in points" (`crates/engine/src/cmd/fileio/tests_pdf.rs`).
|
||||
A PDF/A-2b export at PDF 1.4 with a page longer than 14,400 pt is written as PDF 1.6 with a `UserUnit` and a warning, whether or not `longPagesInPoints` is on, so its page boundaries stay within PDF/A-2's limit of 14,400 units (ISO 19005-2, 6.1.13) unless the page is too narrow for that (`crates/pdf/src/tests/marks.rs`).
|
||||
@@ -1811,6 +1834,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
- A Word paragraph justified with a low, medium or high kashida length places justified with Insert Kashidas set to Short, Medium or Long (`file.place`, `crates/engine/src/tests/textimport.rs`).
|
||||
- File › Place reads Word 97-2003 `.doc` documents as area type with the same formatting, read from the main text's pieces, the style sheet's paragraph and character styles and direct formatting. Table rows are paragraphs with their cells separated by tabs and fields place as their results; fields without a result, hidden and deleted text, pictures, headers, footers, notes, comments and text boxes are left out, and `warnings` names each kind left out or changed. Encrypted documents, documents last saved with fast save and Word 6.0 and Word 95 documents are refused (`file.place`, `crates/engine/src/tests/textimport.rs`).
|
||||
- Placing a Word 97-2003 `.doc` document works out each style's formatting once and each property run's once, and refuses property pages that are out of order, listed twice or overlap, a style sheet that holds fewer styles than it counts, styles based on each other in a loop, and more than 100,000 runs of character or of paragraph properties, 16 MiB of properties or 100,000 paragraphs, hidden ones included (`file.place`, `crates/engine/src/tests/textimport.rs`).
|
||||
- File › Place of a text file with the Unicode character set reads UTF-16 without a byte-order mark by the rule Import Data Sets… uses (at least half of its two-byte units hold a NUL byte; the byte order that reads a line break; valid UTF-16 with no NUL character), instead of reading it as UTF-8 with other characters in place of those outside U+0001 to U+00FF (`file.place`, `crates/engine/src/tests/textimport.rs`).
|
||||
- On the desktop, File › Place reads and decodes files off the UI thread, one at a time, and places each once it is read, with "Placing" in the status bar and the busy spinner until then: the Place dialog's OK, a file dropped on the canvas, a click or drag of the place cursor, and the OK of the PDF, DXF and text import options. The files and thumbnails the place cursor is loaded with are read the same way, and the Place dialog's lines about its files are read on a thread of their own. Files are placed in the order they were started; a file is not placed while a dialog is open or a drag is under way, and a file whose document was closed meanwhile is not placed. `file.place` and `file.place.queue` over MCP and scripts reply as before.
|
||||
- A file read for `file.place`, or files read for the place cursor, apart from the session (`Session::place_read`, `Session::place_queue_read`) go only into the document they were read for: while another document is active, or once that document is closed, they are refused with "the document it was prepared for is no longer active" and no document, selection, tool or undo step changes (`crates/engine/src/tests/place.rs`).
|
||||
- On the desktop, Paste from a menu or shortcut captures another app's bitmap or reads a copied image file on the UI thread, then decodes the image on the file-reading worker. The status bar shows "Pasting" until the image is pasted. Windows device-independent bitmaps and Linux clipboard images are encoded as PNG on that worker. A Copy or Cut made while the image is read keeps its internal clipboard. `edit.paste*` over MCP and scripts reads the bitmap at once.
|
||||
@@ -1845,6 +1869,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
- A look at the linked files whose worker thread ends without a result, such as after a panic, no longer stops later looks: the app clears it, stops asking for a frame every 100 ms, and the next look starts on schedule (`crates/engine/src/tests/linkwatch.rs`, `crates/ui-egui/src/tests/place.rs`).
|
||||
- Import and paste, 2026-10-13: a multi-artboard `.ai` with notes beside its artboards opens from its editing data, a page's art past its artboard no longer lying over the page before it (#1528); a `.ai` gradient whose stops are listed upwards keeps each midpoint on the stop that starts its part of the ramp (#1530); SVG text on a path follows basic shapes (circle, ellipse, rect, line, polyline, polygon) as their SVG 2 equivalent paths (#1531, fixes #1527); PDFs whose alpha soft masks are drawn as images import with the mask instead of empty art (#1551); EPS and PostScript type set in Type 42 (TrueType) fonts imports at its size instead of 1000 times too large (#1553); PDF and EPS import keep a clipping path whose bounding box covers the page but whose shape doesn't (#1544, fixes #1542). Opening or placing a file with an image too large to decode says so, and the Links panel shows it on the row (#1540, part of #1479). Paste takes a PDF or EPS another app copied as editable vector art: from the macOS pasteboard (with SVG), EPS on Windows beside PDF, and `.eps` files copied in a file manager, with the new command `clipboard.importEps` (#1538, fixes #1499).
|
||||
- A `.ai` or `.ait` file copied in a file manager pastes as its art: one that holds a PDF pastes the objects of its editing data, and one saved as PostScript pastes as a copied `.eps` file does.
|
||||
- Paste checks the size of a file copied in a file manager before reading it: a file of more than 64 MiB, VectorCraft's own limit, is skipped and the next copied file that is art pastes. A file that grows past the limit while it is read is skipped too, after at most one byte more than the limit is read.
|
||||
- A copied `.ai` or `.ait` file that holds a PDF pastes the objects of its editing data as File › Open reads them: every layer's objects go into the active layer in their stacking order, with their names, hidden objects and type objects, instead of the PDF page's art with its type as outlines. When the editing data can't be read, the file pastes its page as before (`clipboard.importPdf {editingData}`). The objects of a hidden layer come in hidden, from a pasted EPS too.
|
||||
- Import and export, later 2026-10-13 merges: SVGs that move objects with a CSS transform (`translate(100px, 0)`, `rotate(45deg)`) or style type with the `font` shorthand import as drawn (#1565); SVG symbols whose shapes use percentage lengths import at the size and place they are drawn, the percentages being of the symbol's `viewBox` (#1596); Inkscape's flowed text (`flowRoot`) opens as area type in its rectangle, a paragraph per `flowPara`, instead of being dropped, and a region that can't be read is left out with a warning (#1569, fixes #1568); the warning for an unsupported SVG filter names the filter, its primitives and the object, and says the object is drawn without it (#1599, fixes #1598); the pages of an Inkscape multi-page SVG become artboards, named by their labels (#1603, fixes #1601); SVG export with CSS classes or style entities stays fast in documents with many distinct styles (#1567); PDF and `.ai` import: evenly letter-spaced or tightened type on a path keeps its length along the path instead of closing up to the font's advances (#1586), and type on a path whose stroke is written glyph by glyph comes in as one text object with its stroke, not one object per glyph (#1585); the ICC profiles embedded in JPEG, TIFF and PSD exports have every tag on a 4-byte boundary (ICC.1 §7.1.2), so strict readers accept them (#1589, fixes #1584); GIF, PNG-8 and other indexed exports find each pixel's palette colour through an index instead of a scan, with identical output (#1576); a zero-length subpath draws its round cap as a dot and its projecting cap as a square, so dots in imported `.ai` and SVG files show (#1619, fixes #1613).
|
||||
- Files and untrusted input, 2026-10-14 merges: EPS import: a stitched shading keeps its hard colour changes (#1654, #1653). WMF/EMF import refuses an oversized embedded PNG or JPEG from its header, before any pixels are decoded (#1776). PDF open no longer takes exponential time on a crafted name tree with shared nodes when it looks for the editing data (#1781). The size limits on a native file's embedded data also apply to files read from memory, not only streamed ones (#1783). Saving over a private file on Unix no longer leaves a readable temporary copy beside it while the file is written (#1778). An Export for Screens suffix can no longer place files outside the export folder (#1777). Package refuses a folder where it would overwrite the open document or one of its linked files (#1786). ruzstd 0.9.1 fixes a decompression bomb (RUSTSEC-2026-0344) reachable from EPS/`.ai` and Affinity import (#1807). File Info dates are stamped only after a save succeeds, so a failed save no longer changes them (#1774). Linked files that change during a drag are updated after the drag instead of being missed (#1773).
|
||||
@@ -1984,6 +2009,8 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
|
||||
- **Objects on Path measures its path once:** placing the objects, finding one object's place and transforming the group flatten each path once and use it both for the path's length and for the points along it, where they flattened it two or three times before; a request for an object past the last one returns nothing without flattening the path, and a move of the group flattens no path. A path whose length adds up past the largest finite number no longer counts as one objects can be attached to. Evidence: `objects_on_path::tests::{stops_and_stop_flatten_the_path_once, transforming_the_group_flattens_each_path_once, placing_the_objects_flattens_the_path_once, a_path_too_long_to_measure_is_not_attachable}` in `crates/doc`.
|
||||
|
||||
- **Objects on Path widgets measure the path once:** with one Objects on Path group selected, finding where its Rotate All, Space, Move All and Select/Move widgets go, testing whether the pointer is over one and starting a drag flatten the group's path once, and the canvas draws all four widgets from that one flattening. Before, each widget flattened the path two or three times, and one pointer move over the group could flatten it eleven times. A drag of the Space, Move All or Select/Move widget keeps the measurement it started with and measures again only when the path changes, where it flattened the path twice on every pointer move. The widgets' places, what the pointer hits, the cursors and what each drag changes stay the same. Evidence: `objects_on_path::tests::{each_widget_lookup_flattens_the_path_once, the_widgets_of_a_group_share_one_flattening, a_widget_drag_flattens_the_path_once, a_widget_drag_follows_a_path_that_changed}` in `crates/tools`.
|
||||
|
||||
- **Blend, mesh and envelope numbers given as text:** `object.blend.make` and `object.blend.options` (`steps`, `distance`, `value`), `object.envelope.makeWithWarp`, `resetWithWarp` and `options` (`bend`, `h`, `v`, `horizontalDistortion`, `verticalDistortion`), `object.envelope.makeWithMesh` and `resetWithMesh` (`rows`, `cols`, `columns`), `object.envelope.options` (`fidelity`), `object.mesh.create` (`rows`, `cols`, `columns`, `highlight`) and `object.mesh.setPointColor` (`opacity`) refuse a value other than a number or null, such as `"8"`, and change nothing. `object.mesh.create` refuses an `at` that is not `[x, y]`.
|
||||
|
||||
- **Blend and envelope options given as text:** `object.blend.make` and `object.blend.options` (`smooth`), `object.blend.spine.moveAnchor` (`independent`) and `reshapeSegment` (`perpendicular`), `object.envelope.makeWithWarp`, `resetWithWarp` and `options` (`horizontal`), `object.envelope.resetWithMesh` (`maintainShape`), `object.envelope.options` (`antiAlias`, `distortAppearance`, `distortLinearGradients`, `distortPatternFills`) and `object.envelope.editContents` (`editing`) refuse a value other than true, false or null, such as `"false"`, and leave the document and its undo history as they were.
|
||||
@@ -2043,7 +2070,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
|
||||
|
||||
`xtask/src/pngsuite.rs` verifies each file from the pinned PngSuite mirror against `xtask/pngsuite.sha256` before it reaches the corpus. Seven synthetic regressions cover substitution, oversize, cache repair, failure cleanup, nonregular targets, stale staging and manifest limits. The opt-in corpus remains gitignored; no PNGs are committed.
|
||||
|
||||
Evidence for the shared light Color: geometry tests in `tests_lighting`, effect paint tests, command/save/undo/expand and SVG/PDF checks in `three_d_light_color`, and headless picker/reset/preview tests in `tests_revolve`. Revolve keeps smooth colored vector ramps and continuous flat-lit caps. Inflate geometry tests check spherical lighting, shared vertex/edge continuity, concave cell coverage, puffed backs at perspective and legacy single-light/list equivalence; rendered command/export regressions cover smooth shading and editable expansion. Four legacy white-light PNGs matched main byte for byte when this was measured (2026-10-17); since every 3D seam took round joins (2026-11-12), white-light output is expected to differ from them at facet corners ([Seams](three-d.md#seams)); the four scenes were not exported again to measure it; [release measurements](3d-lighting-performance.md) record the colored solid-fill batch and the remaining source-gradient cost.
|
||||
Evidence for the shared light Color: geometry tests in `tests_lighting`, effect paint tests, command/save/undo/expand and SVG/PDF checks in `three_d_light_color`, and headless picker/reset/preview tests in `tests_revolve`. Revolve keeps smooth colored vector ramps and continuous flat-lit caps. Inflate geometry tests check spherical lighting, shared vertex/edge continuity, concave cell coverage, puffed backs at perspective and legacy single-light/list equivalence; rendered command/export regressions cover smooth shading and editable expansion. Four legacy white-light PNGs matched main byte for byte when this was measured (2026-10-17); since every 3D seam took round joins (2026-11-12), white-light output is expected to differ from them at facet corners ([Seams](three-d.md#seams)); the four scenes were not exported again to measure it; [release measurements](3d-lighting-performance.md) record the colored solid-fill batch and the remaining source-gradient cost. Colored Inflate's facets lie over an underlay of themselves under one clip, so their shared edges show neither the black channel backdrop nor the background ([Seams](three-d.md#seams)); `three_d_light_color::colored_light_surfaces_match_supersampling_at_internal_facet_edges` compares 1:1 with 3x averaged down, and `colored_light_seams_stay_closed_in_svg_pdf_and_expansion` checks SVG, PDF and Expand Appearance.
|
||||
|
||||
## Eyedropper character dimensions (2026-11-11)
|
||||
|
||||
@@ -2452,6 +2479,7 @@ Edit › Copy and Cut put the selected ruler guides on the clipboard, with the s
|
||||
| 2026-11-11 | minor | Bundled content: built-in Energy Beams brush library (Laser Bolt, Plasma Arc, Charge Wave, Spark Trail); brush libraries evidence updated; ~44% → ~46%; more built-in brush libraries remain. |
|
||||
| 2026-11-11 | minor | Bundled content: built-in Skill Icons symbol library (Attack, Defend, Heal, Buff, Ult); symbol libraries evidence updated; ~42% → ~44%; more built-in symbol libraries remain. |
|
||||
| 2026-11-11 | minor | Bundled content: built-in Status Effects graphic style library; style libraries evidence updated; ~40% → ~42%; MCP Symbol libraries list UI Frames and Map Markers; more built-in graphic-style libraries remain. |
|
||||
| 2026-11-14 | minor | Symbols panel context menu: right-click on a symbol in thumbnail or list view displays a context menu (Place Symbol Instance, Edit Symbol, Duplicate Symbol, Delete Symbol, Break Link to Symbol, Select All Instances), selecting the symbol first if unselected; scores and estimates unchanged. |
|
||||
| 2026-11-11 | minor | Bundled content: built-in Inventory Icons symbol library (Sword, Shield, Potion, Key, Gem); symbol libraries evidence updated; ~38% → ~40%; more built-in symbol libraries remain. |
|
||||
| 2026-11-11 | minor | Guides and snapping: a Shift move slides the selection along its line onto a ruler guide by its edges and centre, as a move without Shift does (#4312); a guide a nearly parallel line only reaches a long way off pulls nothing. Score and hours unchanged (estimated). |
|
||||
| 2026-11-10 | minor | Automation: MCP tool count 33; headless `command_list` lists `UI_COMMANDS` (`ui: true`); eight prompts; effect-id vs command-id clarified (#6460); scores and hours unchanged. |
|
||||
|
||||
@@ -121,6 +121,14 @@ How a facet carries its seam depends on the lights and the paint:
|
||||
groups clipped to the union of its facets, so no seam reaches past the surface; a gradient fill, and a solid-color
|
||||
fill or stroke whose faces share one depth order with another solid's, fills each facet's ramps through a clip of
|
||||
the facet and its seam, outlined with round joins.
|
||||
The facets of a surface drawn this way lie over an underlay
|
||||
of themselves whose seams are 2 pt wide, reaching 1 pt past each edge, and one clip to the union of the facets and
|
||||
their seams removes what the underlay paints past the surface. Where two facets' antialiased edges meet, the
|
||||
underlay fills the pixels they leave partly uncovered with the neighbors' own light, so no black channel backdrop
|
||||
or background shows there. Compared with the same art drawn at 3x and averaged down, away from the surface's outline
|
||||
and from places where the light changes sharply, a pixel drawn at 1:1 is opaque where the 3x art is opaque, and
|
||||
otherwise its alpha is within 3 levels. Inflate seen straight on with an opaque fill also has each color channel
|
||||
within 3 levels (VectorCraft's own measure).
|
||||
- Extrude & Bevel (Classic), Rotate (Classic) and Revolve (Classic): a path and a seam for every face; gradient and
|
||||
pattern faces seam only the base paint, and the shading and highlight layers cover the face alone. The Wireframe
|
||||
surface draws edges only, with no seam.
|
||||
@@ -171,6 +179,10 @@ The rest is our reading:
|
||||
once their faces pass it no later solid is built: the object draws its source art, and applying or editing the
|
||||
effect, Export 3D Object and **Expand as Wireframes** report that the 3D surface is too complex. A stroke left
|
||||
out for its own limits does not count.
|
||||
- Inflate works out how high every shape puffs before it builds the first solid, because the highest puff sets
|
||||
how far away the eye is. At a Volume of 0 % no shape puffs, so each shape's puff is worked out only when its
|
||||
solid is built, and none is worked out for the solids after the limit stops. The shadow builds no solid for a
|
||||
fill or stroke that is fully transparent.
|
||||
|
||||
## Groups
|
||||
|
||||
|
||||
+6
-5
@@ -1,6 +1,6 @@
|
||||
# UI and interaction parity
|
||||
|
||||
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-11-13 · **Change:** minor (Graphic Styles list fills a taller panel, #2992; scores and estimates unchanged; previously: library panels' lists fill a taller panel, #2992; scores and estimates unchanged; previously: Swatches list fills a taller panel, #1638; scores and estimates unchanged; previously: icon-strip flyouts also resize from the top edge and the canvas-side top corner, keeping the moved top in workspaces (storytold/craft-libs#1094); scores and estimates unchanged; previously: macOS: the canvas cursor stays after the pointer moves, #6362; scores and estimates unchanged; previously minor: Remove Background in the Contextual Task Bar, Properties › Quick Actions and the Control bar; previously minor: Ruler origin: the corner drag snaps as a drawn point does; previously minor: Live Paint Bucket fills faces crossed in one drag (#6373); previously: #6404: transform-aware Eyedropper character copying; scores and estimates unchanged; previously: Outline view: images and gradient meshes are picked on what Outline draws, so a click inside them reaches the path behind, #6437; previously minor: a middle-click on a document tab closes it, #6506; previously minor: Blob Brush: a round tip's preview is the outline of the area it adds, round at both ends, as the stroke it commits (#4343); scores and estimates unchanged; previously:; ruler double-click adds a guide at the pointer, #5239; G5: Inventory Icons built-in symbol library (four built-ins); previously minor: files that record no units open in Preferences › Units › General, #5820; previously minor: interim macOS cursor delivery, #2292; native validation pending; scores and estimates unchanged; Control bar › Snapping includes the existing Snap to Glyph and Alignment Guides toggles (#6164); scores and estimates unchanged; floating tab groups collapse into the side icon rail and opened rail panels fold back into it, #5925 in part; numeric fields step on wheel hover without taking keyboard focus, #5949; Character Styles panel: a double-click on a style's row opens its Character Style Options; the dialog keeps a fixed width and scrolls its sections, so its buttons stay on screen; Selection QoL: marquee modes and visible feedback, #5313; #3380 deletion-only review follow-up: independent survivors keep gradient placement, owned subpaths avoid discarded copies, and contracts/status/evidence are clarified; endpoint highlighting remains open; scores and estimates unchanged; Drop Shadow and glow dialogs: spinner arrows, #5367, #5368; Stroke Weight Up and Down shortcuts, #5797; Layers: Rename (`ui.rename`) opens the name field of the selected layer, group or object, #5324; Properties in Edit Artboards: Transform section above the Artboards section, #5219; scrubby labels: the Control bar's Stroke: and Opacity: links and the Properties panel's Stroke link scrub their fields, #4088; Properties: Quick Actions has Repeat Options for one selected repeat, #5181; Direct Selection: Shift-click picks several blend spine points, which drag together, #5285; Direct Selection: Cmd/Ctrl held lends the Selection tool and shows its bounding box, #3901; Join tool trims two crossing open paths and joins them at the crossing, #5844; Control bar: Paragraph: link and Align left/center/right while type is selected, #5372; shape tools: a press on the selection's centre point moves it and one in the rotate zone outside a box corner turns it, #5477; scores and estimates unchanged) · **Target:** Adobe Illustrator 2026 (30.x; Units › East Asian Type acts, with Q and Ha units; scores unchanged)
|
||||
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-11-13 · **Change:** minor (Pencil continuation, straight-line and closing cursors; scores and estimates unchanged; previously: Graphic Styles list fills a taller panel, #2992; scores and estimates unchanged; previously: library panels' lists fill a taller panel, #2992; scores and estimates unchanged; previously: Swatches list fills a taller panel, #1638; scores and estimates unchanged; previously: icon-strip flyouts also resize from the top edge and the canvas-side top corner, keeping the moved top in workspaces (storytold/craft-libs#1094); scores and estimates unchanged; previously: macOS: the canvas cursor stays after the pointer moves, #6362; scores and estimates unchanged; previously minor: Remove Background in the Contextual Task Bar, Properties › Quick Actions and the Control bar; previously minor: Ruler origin: the corner drag snaps as a drawn point does; previously minor: Live Paint Bucket fills faces crossed in one drag (#6373); previously: #6404: transform-aware Eyedropper character copying; scores and estimates unchanged; previously: Outline view: images and gradient meshes are picked on what Outline draws, so a click inside them reaches the path behind, #6437; previously minor: a middle-click on a document tab closes it, #6506; previously minor: Blob Brush: a round tip's preview is the outline of the area it adds, round at both ends, as the stroke it commits (#4343); scores and estimates unchanged; previously:; ruler double-click adds a guide at the pointer, #5239; G5: Inventory Icons built-in symbol library (four built-ins); previously minor: files that record no units open in Preferences › Units › General, #5820; previously minor: interim macOS cursor delivery, #2292; native validation pending; scores and estimates unchanged; Control bar › Snapping includes the existing Snap to Glyph and Alignment Guides toggles (#6164); scores and estimates unchanged; floating tab groups collapse into the side icon rail and opened rail panels fold back into it, #5925 in part; numeric fields step on wheel hover without taking keyboard focus, #5949; Character Styles panel: a double-click on a style's row opens its Character Style Options; the dialog keeps a fixed width and scrolls its sections, so its buttons stay on screen; Selection QoL: marquee modes and visible feedback, #5313; #3380 deletion-only review follow-up: independent survivors keep gradient placement, owned subpaths avoid discarded copies, and contracts/status/evidence are clarified; endpoint highlighting remains open; scores and estimates unchanged; Drop Shadow and glow dialogs: spinner arrows, #5367, #5368; Stroke Weight Up and Down shortcuts, #5797; Layers: Rename (`ui.rename`) opens the name field of the selected layer, group or object, #5324; Properties in Edit Artboards: Transform section above the Artboards section, #5219; scrubby labels: the Control bar's Stroke: and Opacity: links and the Properties panel's Stroke link scrub their fields, #4088; Properties: Quick Actions has Repeat Options for one selected repeat, #5181; Direct Selection: Shift-click picks several blend spine points, which drag together, #5285; Direct Selection: Cmd/Ctrl held lends the Selection tool and shows its bounding box, #3901; Join tool trims two crossing open paths and joins them at the crossing, #5844; Control bar: Paragraph: link and Align left/center/right while type is selected, #5372; shape tools: a press on the selection's centre point moves it and one in the rotate zone outside a box corner turns it, #5477; scores and estimates unchanged) · **Target:** Adobe Illustrator 2026 (30.x; Units › East Asian Type acts, with Q and Ha units; scores unchanged)
|
||||
>
|
||||
> Vector Halftone preview update (2026-11-10): temporary dot selection marks are hidden, and the bounding box stays available (#6369).
|
||||
>
|
||||
@@ -52,6 +52,7 @@ Artboard Options forwards the active Artboard tool's Scale Artwork with Artboard
|
||||
| Date | Change | Summary |
|
||||
|---|---|---|
|
||||
| 2026-11-14 | minor | Layers panel: right-clicking a layer/group/object row shows a context menu with Options…, Duplicate, Delete, Lock/Hide Others, Locate Object, and Collect for Export — matching standard desktop layer panel conventions. Scores unchanged. |
|
||||
| 2026-11-13 | minor | Pencil cursors: the continuation cursor (a short rising line) shows over an open end of a selected path before any press, freehand too, and while a continuing stroke nears another selected path's open end it connects to; the straight-line cursor is a short level line; a continued path, a straight line too, shows the closing cursor and closes within Close Paths When Ends Are Within of its other end, and with Alt at the release. Scores and estimates unchanged. |
|
||||
| 2026-11-13 | minor | Graphic Styles: in a panel made taller the list fills the space above the footer instead of stopping at 220 pt (#2992; `the_list_fills_a_tall_panel_above_its_footer` in `crates/ui-egui/src/panels/graphic_styles.rs`). Scores and estimates unchanged. |
|
||||
| 2026-11-13 | minor | Library panels (swatch, Color Book, brush, symbol and graphic style libraries): in a panel made taller the list fills the space above the footer instead of scrolling inside 220 or 280 pt (#2992; `the_list_fills_a_tall_panel_above_its_footer` in `crates/ui-egui/src/panels/library_panel/tests.rs`). Scores and estimates unchanged. |
|
||||
| 2026-11-13 | minor | Swatches: in a panel made taller the swatch list fills the space above the footer instead of scrolling inside 150 or 200 pt (#1638). Scores unchanged. |
|
||||
@@ -178,7 +179,7 @@ tools, never checked side by side) isn't captured row by row.
|
||||
| Blend spine Anchor Point conversion and handle editing (#2544) | implemented | symmetric handles, independent drag/retraction, visible-handle policy and selection/stacking covered by tool and engine regressions; Windows native canvas checks and screenshots reviewed in PR #2643 |
|
||||
| Several blend spine points picked and dragged together (#5285) | done | with Direct Selection, Shift-click picks more points of a selected blend's spine or takes one away, as on a path; dragging any picked point moves them all, and the key objects on them, in one undo step (`object.blend.spine.moveAnchor {with}`); a marquee doesn't pick spine points yet |
|
||||
| Add/Delete/Anchor Point tools; Anchor Point tool drags segments to reshape | done | #2267: a click on a handle end retracts that handle and leaves the anchor a corner with the other one; Shift held at the press on an anchor moves it, handles and all (Shift kept down: at 45° steps) instead of pulling out handles |
|
||||
| Pencil: Fidelity, Keep selected, Alt to Smooth, edit selected paths, close by proximity | done | Fidelity is in screen pixels, the same at any zoom, and goes down to 0.01 px in the dialog and the tool, which sends `path.freehand` the value in points at the current zoom (#5729; the Smooth tool keeps 0.05 pt); its slider runs across the Tool Options row on a logarithmic rail from 0.01 to 20 px, the field shows hundredths, and the slider's and the field's arrow keys step hundredths up to 0.1 px, tenths up to 1 px and whole pixels above (Shift ×10) (#3328); Alt key toggles to Smooth Tool (#2001); Shift held at the press draws a straight line at 45° steps from the Constrain Angle, and Alt held at the press (with Alt key toggles to Smooth Tool off) a straight line at any angle (#3799), with a straight-line cursor while Shift or Alt is held before the press, and a path-continuation cursor over an end of a selected open path, where the line continues the path; Edit Selected Paths continues a selected path from an end and, from a stroke that starts and ends on a selected path, redraws the section between (the shorter way round a closed path, #2850); with Keep selected (Pencil and Paintbrush, on by default) on, a stroke selects the path it draws or continues and replaces the earlier selection, and off a new stroke leaves nothing selected, the earlier selection included, while a continued or redrawn path is deselected and the rest of the selection stays; a filled Pencil path keeps a stroke of None (#1804, part of #1679); while a freehand stroke is drawn back to within Close Paths When Ends Are Within of its start, the Pencil and the Paintbrush show the closing cursor, and a release there closes the path; a Pencil stroke from an end of one selected open path to an end of another connects the two into one path |
|
||||
| Pencil: Fidelity, Keep selected, Alt to Smooth, edit selected paths, close by proximity | done | Fidelity is in screen pixels, the same at any zoom, and goes down to 0.01 px in the dialog and the tool, which sends `path.freehand` the value in points at the current zoom (#5729; the Smooth tool keeps 0.05 pt); its slider runs across the Tool Options row on a logarithmic rail from 0.01 to 20 px, the field shows hundredths, and the slider's and the field's arrow keys step hundredths up to 0.1 px, tenths up to 1 px and whole pixels above (Shift ×10) (#3328); Alt key toggles to Smooth Tool (#2001); Shift held at the press draws a straight line at 45° steps from the Constrain Angle, and Alt held at the press (with Alt key toggles to Smooth Tool off) a straight line at any angle (#3799), with a straight-line cursor (a short level line) while Shift or Alt is held before the press, and a path-continuation cursor (a short rising line) over an end of a selected open path, where the stroke continues the path, freehand or straight, and while a continuing stroke ends near an open end of another selected path it connects to; Edit Selected Paths continues a selected path from an end and, from a stroke that starts and ends on a selected path, redraws the section between (the shorter way round a closed path, #2850); with Keep selected (Pencil and Paintbrush, on by default) on, a stroke selects the path it draws or continues and replaces the earlier selection, and off a new stroke leaves nothing selected, the earlier selection included, while a continued or redrawn path is deselected and the rest of the selection stays; a filled Pencil path keeps a stroke of None (#1804, part of #1679); while a freehand stroke is drawn back to within Close Paths When Ends Are Within of its start, or a stroke continuing a selected path (a straight line too) to within it of that path's other end, the Pencil and the Paintbrush show the closing cursor, and a release there closes the path; a Pencil stroke from an end of one selected open path to an end of another connects the two into one path |
|
||||
| Drop Shadow, Outer Glow and Inner Glow: Opacity, the offsets, Blur and Darkness have spinner arrows that step by one (a unit for distances), repeat when held and stop at the fields' ends (#5367, #5368) | done | dialogs::effect test drop_shadow_and_outer_glow_fields_have_spinner_arrows; other effect dialogs' number fields still have none |
|
||||
| Effect dialogs' colour fields: a swatch beside the hex follows typed values, and a double-click opens the Color Picker over the dialog, whose OK fills it and Cancel comes back unchanged (#5365) | done | dialogs::effect tests outer_glow_colour_swatch_opens_the_color_picker and drop_shadow_colour_swatch_opens_the_color_picker (Drop Shadow's Color, #5364); the picker previews nothing itself, the effect dialog previews the returned colour |
|
||||
| Join tool scrubbing, Average, Join | done | Join merges the direct-selected anchors lying on one another along a path, as after Average, into one (#1533); the Join tool trims two crossing open paths whose overhanging ends it scrubs over and joins them at the crossing, instead of drawing a segment between their ends (#5844) |
|
||||
@@ -251,7 +252,7 @@ tools, never checked side by side) isn't captured row by row.
|
||||
| A double-click on a ruler adds a guide at the pointer: a vertical one on the top ruler, a horizontal one on the left ruler (swapped in a view turned 90°, where the rulers read the other document axis; the nearer axis in between), exactly where the pointer is (no snapping), shown even with guides hidden, one undo step (`guide.add`); both clicks of the pair must be on that ruler, and the first adds nothing. The [public page on rulers](https://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/use-rulers.html) doesn't describe this gesture, so it follows the request in #5239 | done | #5239; an artboard guide with the Artboard tool, as a drag from a ruler makes one; `canvas/tests.rs` `double_clicking_a_ruler_adds_a_guide_at_that_position`, `a_canvas_click_then_a_ruler_click_adds_no_guide`, `a_ruler_double_click_follows_a_rotated_view` |
|
||||
| Escape cancels an existing ruler-guide press, move or copy | done | Selection and Direct/Group Selection; app-input regressions cover preselected guides, document/interaction-start selection, Undo/Redo and saved state, later on-canvas motion/release and temporary borrowing from idle Pen. All eight checks and the Direct Selection Escape control passed in current full CI. [Validation evidence](target-app-parity.md#evidence-what-ships-today-by-area) |
|
||||
| Ruler origin: corner drag with preview, snapped as a drawn point is (Smart Guides, Snap to Point and the ruler guides, pixels, the grid), double-click reset to the active artboard, relative X/Y fields, native save/reopen | done | #1212; `document.setRulerOrigin`, `document.resetRulerOrigin`; geometry and command coordinates stay absolute |
|
||||
| Ruler guides as Layers rows: shown, hidden, locked and deleted with their layer; rows dragged to another layer; each row's own eye and lock; a row dropped on the trash deletes its guide | done | `guide.setLayer`; guides from older files go on a layer; `layer.setProps` on a guide's id hides or locks it alone; Object › Lock/Hide › Selection, Unlock All and Show All reach guides; `guide.remove {indexes}` |
|
||||
| Ruler guides as Layers rows: shown, hidden, locked and deleted with their layer; rows dragged to another layer; each row's own eye and lock; a row dropped on the trash deletes its guide; a plain click on another row lets go of the guide | done | `guide.setLayer`; guides from older files go on a layer; `layer.setProps` on a guide's id hides or locks it alone; Object › Lock/Hide › Selection, Unlock All and Show All reach guides; `guide.remove {indexes}`; #7340 |
|
||||
| Objects made into guides: drawn in the guide colour and style of Preferences; Lock Guides locks them too (no select, move or delete); a dragged selection snaps to ruler guides with Smart Guides on, by the nearest point of the path when pressed on its stroke or beside its edge, so the path lands exactly on the guide | done | #1534 (#1543, #1583); #3701 |
|
||||
| A selected ruler guide's X or Y in the Transform panel; typing a value moves it | not scored | #1659 (part of #1597); several guides move together; not in Properties or the Control bar. Not established by the documentation we could find: the help pages on guides, rulers and the Transform, Control and Properties panels (read again on 2026-10-14) don't describe it, and the one public statement is a user's [community answer](https://community.adobe.com/questions-652/adding-a-new-custom-guide-785586), which is not documentation. Kept as a convenience pending the owner's decision; no parity claim |
|
||||
| Alt swaps a ruler guide's orientation while dragging | missing | Alt-drag copies the selected guides ([Use rulers](https://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/use-rulers.html)); `guide.move` `{copy: true}` |
|
||||
@@ -384,7 +385,7 @@ next unit in the order a right-click on a ruler lists them, from Feet back to Po
|
||||
|---|---|---|
|
||||
| Effect > Warp Options: style previews, orientation choices and percent controls | done | #1760; focused input, mixed-style and history checks passed; original captures reviewed. No geometry or optional Properties changes. |
|
||||
| Command search: Up and Down move through the results, Enter runs the highlighted one | done | #1798 (#1757) |
|
||||
| Learn panel: Window › Learn and Explore tutorials on the app bar open it; For you holds a Quick skill guide card, Skills lists VectorCraft's own skills with progress rings that fill and counts of tutorials finished, a tutorial shows its numbered steps with a check box each that marks the step done once its sample is open, a finished tutorial has a check mark, Back goes up a level; a tool's name in a step is a link that marks the tool where the toolbars show it (its button, its group's flyout, a torn-off strip, a toolbar made with New Toolbar or the All Tools drawer) without choosing it; View more opens the tutorial's practice sample as a new untitled document, Finish tutorial then marks it finished with all its steps, and Next Up shows the next tutorial in the same skill; Reset progress clears the progress (no video) | done | [the help page](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/learn-skills-quick-skill-guide.html); `learn.list`, `learn.skills`, `learn.show`, `learn.locateTool`, `learn.openSample`, `learn.markStep`, `learn.finish`, `learn.next`, `learn.resetProgress`; the mark's look and 3-second lifetime, marking steps by hand, keeping the progress in the preferences and Reset progress are VectorCraft's own rules; `panels::learn::tests`, `toolbar::tests` |
|
||||
| Learn panel: Window › Learn and Explore tutorials on the app bar open it; For you holds a Quick skill guide card, Skills lists VectorCraft's own skills with progress rings that fill and counts of tutorials finished, a tutorial shows its numbered steps with a check box each that marks the step done once its sample is open, a finished tutorial has a check mark, Back goes up a level; a tool's name in a step is a link that marks the tool where the toolbars show it (its button, its group's flyout, a torn-off strip, a toolbar made with New Toolbar or the All Tools drawer) without choosing it; View more opens the tutorial's practice sample as a new untitled document, Finish tutorial then marks it finished with all its steps, and Next Up shows the next tutorial in the same skill; Reset progress clears the progress (no video) | done | [the help page](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/learn-skills-quick-skill-guide.html); `learn.list`, `learn.tab`, `learn.skills`, `learn.skill`, `learn.show`, `learn.back`, `learn.locateTool`, `learn.openSample`, `learn.markStep`, `learn.finish`, `learn.next`, `learn.resetProgress`; the mark's look and 3-second lifetime, marking steps by hand, keeping the progress in the preferences and Reset progress are VectorCraft's own rules; `panels::learn::tests`, `toolbar::tests` |
|
||||
| Pathfinder panel: a group selected alone counts its nested shapes, so an expanded stroked object keeps the Shape Modes enabled | done | #1642 (#1635) |
|
||||
| Selected Grid Repeat shows row, column and corner handles and spacing sliders; bounding-box handles take priority where they meet | done | #2691, `tools/src/repeat_grid.rs`; [public behavior reference](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/create-and-edit-patterns/set-grid-repeat-options.html); drags preview and commit `object.repeat.options` as one undo step, Escape cancels; Radial Repeat has no handles yet |
|
||||
| Grid Repeat Options (Object › Repeat › Options…) has a Preview checkbox: the repeat on the canvas follows the fields while the dialog is open, Cancel puts the original back without a history step, OK keeps the previewed values as one undo step | done | #2651; [public behavior reference](https://helpx.adobe.com/illustrator/desktop/paint-and-fill/create-and-edit-patterns/set-grid-repeat-options.html) lists the Preview option for the grid options only, so Radial and Mirror Repeat Options have none; `dialogs/command.rs` tests |
|
||||
@@ -418,7 +419,7 @@ next unit in the order a right-click on a ruler lists them, from Feet back to Po
|
||||
| Actions panel: Delete Selection (bottom bar) deletes the selected set with its actions and keeps the other sets ([Actions panel overview](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/actions-panel-overview.html)) | partial | `ui.actionSet.delete`; `panels/actions.rs` tests. VectorCraft's own rules, which the overview does not cover: deleting a set asks first (a selected action is still deleted at once), Shift-click on a set's name selects a range of sets, ≡ › Delete does the same as the button, and Default Actions and the last set can be deleted. Undo does not restore a deleted set, and recorded commands cannot be selected or deleted |
|
||||
| Actions panel: ≡ › Duplicate copies the selected action or set ([Actions panel overview](https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/actions-panel-overview.html)) | partial | `ui.actionSet.duplicate`; `panels/actions.rs` tests. VectorCraft's own rules, which the overview does not cover: the copy goes right after the original, is named after it with " copy" added and is selected, and a copied set holds copies of all its actions. Undo does not remove the copy, and recorded commands cannot be duplicated |
|
||||
| Properties panel per context (every selection type's Quick Actions) | partial | one clip group: Edit Clipping Path and Edit Contents, at the top of the panel rather than in Quick Actions (G1); the overview's additional controls ([Properties panel overview](https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/properties-panel-overview.html)): Blend Options (one blend selected, with any tool, #4817), Repeat Options (one radial, grid or mirror repeat selected: Object › Repeat › Options, #5181; the overview does not list it) and Merge Live Paint (a Live Paint group with more) in Quick Actions, the Width Profile list (Width tool or a variable-width stroke) and an applied effect's Delete icon in Appearance, Corner and Corner Radius for corners selected with Direct Selection; Variable Font was already there; Edit Artboards: a Transform section (reference point, X, Y, W, H, preset, orientation) above the Artboards section (#5219) |
|
||||
| Select › Start Global Edit / Stop Global Edit; Properties › Quick Actions with the Global Edit Options popover (Match: Appearance, Size; On Artboards: All Artboards or a range, Include Objects On Canvas; Result(s)); Escape stops it; the matched objects are highlighted in their layer colour while it runs; a Shift-click on a highlighted match leaves it out | partial | #3521, `select.globalEdit` / `select.globalEditOptions` / `select.globalEditExclude`, `crates/engine/src/tests/globaledit.rs`; paths, compound paths, symbol instances and groups of them (similar groups, #4939: edits inside one group reach the same object in the others; [public source](https://helpx.adobe.com/illustrator/desktop/manage-objects/edit-objects/edit-groups-with-similar-objects.html)); a group holding type or an image is not taken, as Global Edit does not take images or text; Shift-click to leave a match out ([public source](https://helpx.adobe.com/ph_fil/illustrator/how-to/global-editing-sensei.html)); the Control bar's Global Edit Options dropdown opens the same options; the matches are highlighted before the start (`selecting_one_object_highlights_the_similar_objects_before_global_edit_starts`); rotated copies remain ([public source](https://helpx.adobe.com/illustrator/desktop/manage-objects/edit-objects/edit-similar-objects.html)) |
|
||||
| Select › Start Global Edit / Stop Global Edit; Properties › Quick Actions with the Global Edit Options popover (Match: Appearance, Size; On Artboards: All Artboards or a range, Include Objects On Canvas; Result(s)); Escape stops it; the matched objects are highlighted in their layer colour while it runs; a Shift-click on a highlighted match leaves it out | partial | #3521, `select.globalEdit` / `select.globalEditOptions` / `select.globalEditExclude`, `crates/engine/src/tests/globaledit.rs`; paths, compound paths, symbol instances and groups of them (similar groups, #4939: edits inside one group reach the same object in the others; [public source](https://helpx.adobe.com/illustrator/desktop/manage-objects/edit-objects/edit-groups-with-similar-objects.html)); a group holding type or an image is not taken, as Global Edit does not take images or text; Shift-click to leave a match out ([public source](https://helpx.adobe.com/ph_fil/illustrator/how-to/global-editing-sensei.html)); the Control bar's Global Edit Options dropdown opens the same options; the matches are highlighted before the start (`selecting_one_object_highlights_the_similar_objects_before_global_edit_starts`); rotated copies are matched and take an edit turned by their angle ([public source](https://helpx.adobe.com/vn_vi/illustrator/how-to/modern-logo-design.html); `start_global_edit_takes_rotated_copies_and_an_edit_reaches_each_turned_by_its_angle`); reflected copies are not matched (VectorCraft's own rule) |
|
||||
| Contextual task bar | done | |
|
||||
| Control bar with Transform and Stroke popovers | done | |
|
||||
| Stroke panel: custom arrowheads after the built-in ones in both arrowhead menus, from the arrowheads file that the panel menu's Edit Arrowheads… opens; saving the file reloads the menus, and a stroke keeps a copy of its custom head's art | done | [Apply stroke on an object](https://helpx.adobe.com/illustrator/using/stroke-object.html) (Customize arrowheads); the file's layout (one symbol per head, pointing right, tip at the registration point, height drawn as wide as the built-in heads) is VectorCraft's own; `stroke.arrowheads.edit`, `stroke.arrowheads.list`, `stroke.arrowheads.reload`, `stroke.set` `{custom: name}`; engine `tests::arrowheads`, `stroke::tests_arrows::custom_heads_draw_their_own_art_at_the_tip` |
|
||||
|
||||
Reference in new issue
Block a user