Commit Graph
836 Commits
Author SHA1 Message Date
bflatastic 864ef2f200 Merge main into #8763
# Conflicts:
#	docs/target-app-parity.md
2026-11-20 05:45:14 +07:00
dotCooCoo b423ce5855 Quick Pen: on-canvas toolbar with its actions, Flip Arc and More menu
Selecting the Quick Pen tool shows a toolbar on the canvas. Straight
Line, Continuous Arc and Sharp Corner Arc set the tool's action, Flip
Arc flips the last sharp-corner arc as C does, and More Options has
Hide Toolbar, Pin Toolbar Position and Reset Toolbar Position. The
handle at its left end drags it.

While a path is being drawn, the toolbar sits beside the path's last
point, 24 screen points off it on the side the path heads toward, or on
the other side where that side runs off the canvas. With no path being
drawn, it sits at the bottom center of the canvas. A drag's offset
applies in the kind of place it was made in (beside the drawing or
resting), and not where it would cover the path's last point. Pinned,
it stays at its place in the canvas window. It hides while a press
drags on the canvas, and its controls wrap in a canvas pane narrower
than the toolbar. Hide Toolbar hides it until the tool is selected
again; Window › Quick Pen Toolbar also shows or hides it.

- Tool::drawing_end and Session::tool_drawing_end give the point the
  path goes on from and the direction it arrives in.
- New desktop commands: window.quickPenToolbar, window.quickPenToolbar.pin,
  window.quickPenToolbar.reset and tool.quickPen.flipArc; ui.inspect
  reports quickPenToolbar.
- Labels in every catalog.

Docs: docs/mcp.md, docs/control-protocol.md, ROADMAP, docs/ui-parity.md,
docs/target-app-parity.md. Part of #2660.
2026-11-19 10:04:07 -08:00
bflatastic f735b5b7f5 Merge remote-tracking branch 'origin/main' into auto/8494 2026-11-20 00:12:54 +07:00
bflatastic d61eb33e52 Merge main into #8399
# Conflicts:
#	crates/ui-egui/src/i18n/bg.tsv
#	crates/ui-egui/src/i18n/bs.tsv
#	crates/ui-egui/src/i18n/ca.tsv
#	crates/ui-egui/src/i18n/cs.tsv
#	crates/ui-egui/src/i18n/da.tsv
#	crates/ui-egui/src/i18n/de.tsv
#	crates/ui-egui/src/i18n/el.tsv
#	crates/ui-egui/src/i18n/es.tsv
#	crates/ui-egui/src/i18n/fi.tsv
#	crates/ui-egui/src/i18n/fr.tsv
#	crates/ui-egui/src/i18n/gu.tsv
#	crates/ui-egui/src/i18n/hi.tsv
#	crates/ui-egui/src/i18n/hu.tsv
#	crates/ui-egui/src/i18n/id.tsv
#	crates/ui-egui/src/i18n/it.tsv
#	crates/ui-egui/src/i18n/ja.tsv
#	crates/ui-egui/src/i18n/ka.tsv
#	crates/ui-egui/src/i18n/ko.tsv
#	crates/ui-egui/src/i18n/nl.tsv
#	crates/ui-egui/src/i18n/pl.tsv
#	crates/ui-egui/src/i18n/pt-br.tsv
#	crates/ui-egui/src/i18n/ru.tsv
#	crates/ui-egui/src/i18n/sv.tsv
#	crates/ui-egui/src/i18n/tr.tsv
#	crates/ui-egui/src/i18n/uk.tsv
#	crates/ui-egui/src/i18n/vi.tsv
#	crates/ui-egui/src/i18n/zh-hans.tsv
#	crates/ui-egui/src/i18n/zh-hant.tsv
#	docs/gaps.md
#	docs/mcp.md
#	docs/target-app-parity.md
#	docs/ui-parity.md
2026-11-19 23:17:00 +07:00
dotCooCoo 476bc12da4 Merge main into feat/circle-tool-options 2026-11-19 07:50:29 -08:00
dotCooCoo 8c7b75300f Merge main into feat/paint-brush-library 2026-11-19 05:41:10 -08:00
dotCooCoo 5d458d3142 Merge main into feat/arc-by-points 2026-11-19 05:12:59 -08:00
dotCooCoo f9b7c9482e Merge main into feat/circle-tool-options 2026-11-19 05:09:36 -08:00
dotCooCoo df614fb80c Pen: Quick Pen tool draws lines, continuous arcs and sharp-corner arcs
A new tool in the Pen tool's group, chosen with Alt+P (Option+P on
macOS), draws paths of straight lines and circular arcs, as the Quick
Pen help pages describe:
https://helpx.adobe.com/illustrator/web/add-and-edit-artwork/draw-and-edit-paths/draw-with-quick-pen-tool.html
https://helpx.adobe.com/illustrator/web/add-and-edit-artwork/draw-and-edit-paths/quick-pen-tool-keyboard-shortcuts.html

- A click sets the start point; each click, or a press dragged to where
  it is let go, adds a line, a continuous arc (it leaves the last point
  in the path's direction) or a sharp-corner arc, as the tool's action
  says. Each piece is one undo step.
- Alt (Option) pressed and let go on its own switches to the next
  action. C flips the last sharp-corner arc to the other side of its
  chord, and [ and ] make the arc size 15 degrees smaller or larger.
- A click on the first point closes the path, a click on an end of an
  open path continues it, and Escape or Enter ends it. An edit made to
  the path from outside the tool also ends it.
- path.quickPen {start | id, subpath?, keep?, pieces, closed?} draws
  the same path for agents and scripts. The action and arc size are
  kept with the preferences.

The 180 degree default arc size, its 15 degree steps, the side an arc
bulges to and Enter ending the path are VectorCraft's own rules.

Part of #2660 (reported by earlvanze). Not yet: the on-canvas toolbar,
dragging a path's ends to change its length, Ctrl+scroll for the arc
size, and editing and deleting with the tool.
2026-11-19 01:29:06 -08:00
bflatastic a82a968b25 Merge main into #8645
# Conflicts:
#	docs/gaps.md
#	docs/roadmap.md
#	docs/target-app-parity.md
2026-11-19 15:27:12 +07:00
BFlat 7784d2f1a5 Merge pull request #8528 from dotCooCoo/feat/curvature-circle
Shapes: the Curvature Circle tool draws the circle a path bends along
2026-11-19 15:01:28 +07:00
BFlat 1fa8b7f535 Merge pull request #8526 from dotCooCoo/feat/tangent-circle-tool
Path Precision Tools: the Tangent Circle Tool draws a circle on two clicked segments
2026-11-19 15:01:11 +07:00
ruchirguitar 0c65ede5de G5: Add built-in Media Controls symbol library
# Conflicts:
#	docs/gaps.md
#	docs/target-app-parity.md
2026-11-19 10:08:20 +05:30
dotCooCoo c5863cd11a Docs: radius preview of the Three-Point Arc tool needs Measurement Labels
The tool shows the radius by the pointer only with Measurement Labels on. The progress lines in docs/target-app-parity.md, docs/ui-parity.md and ROADMAP.md now say so.
2026-11-18 17:25:09 -08:00
dotCooCoo f5b2dfa8b4 Merge main into feat/curvature-circle 2026-11-18 17:15:45 -08:00
dotCooCoo 32e7344cb9 Merge main into feat/arc-by-points 2026-11-18 17:04:49 -08:00
dotCooCoo e6b6a3dc78 Merge main into feat/circle-tool-options 2026-11-18 16:24:04 -08:00
dotCooCoo a7d9609ce6 Merge main into feat/paint-brush-library 2026-11-18 15:12:11 -08:00
dotCooCoo a9cd206c04 Merge main into feat/tangent-circle-tool 2026-11-18 13:19:09 -08:00
dotCooCoo ca6871025a Merge main into feat/enclosing-shapes 2026-11-18 12:50:45 -08:00
dotCooCoo 91cacaa6ed Path Precision Tools: the bounding shapes' menu items open a dialog with Offset and One per Object
Add Bounding Rectangle… and Add Bounding Circle… open the command dialog
with Offset (0 to 4,000,000 pt), One per Object (`each`) and Preview, so
the menu sets what the commands take. Cancel removes the preview without
a step of history, and an Offset that takes the shape past the canvas
edge leaves the dialog open with the error.

- The canvas check reuses `sanity::rect_in_range`; the params text and
  docs/mcp.md say the limit holds along each axis.
- Tests: the dialog (defaults, preview, Cancel, OK with and without an
  Offset and One per Object, the canvas error, the catalog rows); a circle
  just inside the limit; one edge past the limit is refused.
- Catalogs: the two menu labels with "…" and "One per Object" in all 28;
  the four messages in bg, bs and id as well.
2026-11-18 08:17:22 -08:00
dotCooCoo a0873e4bf1 Merge main into feat/smooth-bridge-many 2026-11-18 08:14:05 -08:00
dotCooCoo 8e09fe6e53 Merge main into feat/enclosing-shapes 2026-11-18 07:37:55 -08:00
dotCooCoo 4dbbf4ac44 Merge main into feat/circle-tool-options 2026-11-18 07:37:50 -08:00
dotCooCoo 0dd0424173 Merge main into feat/arc-by-points 2026-11-18 07:35:11 -08:00
dotCooCoo 602ecb9786 Merge main into feat/tangent-circle-tool 2026-11-18 06:02:18 -08:00
BFlat ff0f7dcac5 Merge pull request #8506 from dotCooCoo/feat/point-tangents
Path Precision Tools: Common Tangents draws the lines from a point to a closed path
2026-11-18 18:25:50 +07:00
dotCooCoo b7af9a7e6b Merge main into feat/tangent-circle-tool 2026-11-18 01:32:50 -08:00
dotCooCoo df9ea190f8 Merge main into feat/paint-brush-library 2026-11-18 01:21:13 -08:00
dotCooCoo f019496286 Merge main into feat/enclosing-shapes 2026-11-17 22:51:21 -08:00
dotCooCoo 4302f4c90b Path Precision Tools: bounding shapes name a shape with no size and stop at the canvas edge
When every shape is left out because it would have no size, for example
Add Bounding Rectangle on a straight horizontal line, the error is now
"the shape would have no size" instead of "nothing to enclose", which
stays for objects with no outline. A shape that would reach more than
4,000,000 pt from the origin, for example with a very large `offset`,
is refused with "the shape would reach past the edge of the canvas"
before anything is drawn. Both messages are in the 24 catalogs that
translate messages.

The params text of addon.pathtools.boundingCircle now names the
sublayer rules that docs/mcp.md states: sublayers that clip their
contents count by their clipping paths, other sublayers by their shown
objects. Both commands' params text lists the errors.

The menu items open no dialog and draw one shape around the whole
selection with no offset. docs/ui-parity.md, docs/target-app-parity.md,
docs/mcp.md and the ROADMAP line now say so, and name `each` and
`offset` as command parameters only.

New tests: the menu items in vectorcraft-ui-egui, the canvas-edge error
in vectorcraft-engine, and shapes::convex_hull in vectorcraft-geom.
2026-11-17 22:50:44 -08:00
BFlat 20d8217312 Merge pull request #7950 from dotCooCoo/feat/smooth-bridge
Path Precision Tools: Smooth Bridge joins two circles with concave arcs
2026-11-18 13:12:40 +07:00
BFlat 62d9937c75 Merge pull request #8448 from dotCooCoo/feat/circle-tool
Shapes: the Circle tool draws a circle through two or three points
2026-11-18 13:09:51 +07:00
dotCooCoo a64ceebccf Shapes: the Curvature Circle tool shows "Corner" at a corner anchor
At a corner anchor the tool now shows "Corner" instead of "Cusp", and
`shape.curvatureCircle` returns "the path has a corner there, so it has
no single curvature".

- A closed subpath whose only segment with length loops back to its
  start (a teardrop) has a corner at its tip, from both ends of the loop.
- An anchor marked smooth whose out handle points back along its in
  handle is a corner.
- The guide error and the new corner error have rows in the 24 catalogs
  that translate every message.
- A test covers a Smart Guides snapping tolerance larger than 5 screen
  points, with Smart Guides off and on.
2026-11-17 21:34:11 -08:00
dotCooCoo 51194f584b Path Precision Tools: the Tangent Circle Tool keeps its first segment until the circle is drawn
- The release returns shape.circleThroughPoints followed by a Notify,
  and the tool forgets the first segment only when it is told, so a
  command that fails leaves the segment picked (as the Direct Selection
  tool's FRAME_PICKED notice follows its command).
- The preview leaves out circles that three of their points cannot give
  back, so the note shows where a click would draw nothing.
- A double-click draws nothing more: the canvas sends it after the
  second click's release, which drew the circle.
- The re-exports for the tool are a separate `pub use` in the pathops
  pathtools module, whose module comment is unchanged.
- Circles of one radius at places tried close together along the
  first segment are no longer taken for repeats: a repeat also touches
  the first segment at the same point. At a radius of 1,000,000 pt the
  513 places along a 100 pt line were cut to 86.
- A test checks the note's row in every complete catalog.

Docs: a drag's circle may touch the first segment anywhere along it;
the circles that are left out; an out-of-range radius option leaves
the radius as it is. The ROADMAP, target-app-parity and ui-parity
entries move next to related entries, and docs/mcp.md is rewrapped to
120 columns.

Part of #7178.
2026-11-17 21:16:04 -08:00
dotCooCoo 51cf404cee Docs: count Paint among the built-in brush libraries
The area rows, the bundled-content row, the G5 entry and the UI row now
name Paint and count eleven built-in brush libraries, and the ROADMAP
progress log has a line for it.
2026-11-17 20:23:57 -08:00
dotCooCoo de29baab11 Shapes: the Curvature Circle tool draws the circle a path bends along
The Curvature Circle tool, after the Circle tool in the Ellipse tool's
flyout, draws the circle that touches a path at a point and bends as the
path bends there, with shape.curvatureCircle. The pointer snaps to the
nearest path that is not a guide within 5 screen points, or within the
Smart Guides snapping tolerance when that is larger, and the tool shows
the circle as a dashed outline (solid once it is more than 50,000 screen
points around), its center, a line from the center to the point it
touches and, with Measurement Labels on, its radius. A click draws the
circle in one undo step, on the side the path bends toward; Shift held at
the press puts it on the other side. A press dragged 2 screen points or
more, or canceled with Escape, draws nothing.

A segment that is the usual cubic of a circular arc of 90° or less gives
a circle with the arc's own radius, shown with an asterisk, so a click on
a circle drawn with the Ellipse tool draws that circle. On a straight
segment, at a cusp or a corner anchor, or where the circle would reach
past the canvas, the pointer shows "Straight segment", "Cusp" or "Circle
too large", and a click draws nothing. An anchor is a corner when the
segments meet there at more than half a degree and it is not marked
smooth; segments of no length between them are passed over. The tool's
icon is new and drawn for VectorCraft.

shape.curvatureCircle takes the path, subpath, segment, t and convex, and
returns the circle's center and radius and whether the radius is an
arc's own. A guide is refused.

draw2::candidate_paths skips the selected paths with a hash set, so it
takes time linear in the number of paths on each pointer move.

Part of #7178.
2026-11-17 20:18:05 -08:00
dotCooCoo a561f666a6 Path Precision Tools: the Tangent Circle Tool draws a circle on two clicked segments
The Tangent Circle Tool (tangentCircle) joins the add-on's tools, in
Object > Plug-ins > Path Precision Tools and the All Tools drawer. A click
on a path segment picks it; a click on a second segment draws the circle
that is tangent to the first segment at the point clicked and touches
the second. The segments beside the second one count with it, and of
the circles found the one touching them nearest the pointer is drawn.

- Shift on the second click uses the tool's radius (36 pt to start, set
  in its options), anywhere along the first segment.
- A drag from the second segment sets the radius to the drag's length;
  Shift steps it by 1, 2 or 5 times a power of 10 pt, at least 4 screen
  pixels, and Cmd/Ctrl pressed during the drag moves it by a tenth.
- Before the click the circle shows with its center, its radii to the
  touch points and its radius, or a translated note says there is none.
  The preview follows a pan, a zoom or an edit under a still pointer.
- The circle is drawn with shape.circleThroughPoints, so Align New
  Objects to Pixel Grid leaves it tangent; one undo step. A circle that
  its three points cannot give back in floating point is not drawn, and
  the first segment stays picked. Escape, an edit outside the tool or
  another document forgets the first segment.

The geometry is circles_through and circles_of_radius in the pathops
crate: the distance to the second segments is sampled along the first
segment's normal (or along the segment, for a radius) and the places
where it equals the radius are taken, including touches between samples.

Part of #7178.

Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md, ROADMAP.
2026-11-17 20:04:15 -08:00
dotCooCoo d89f6b72c4 Merge main into feat/smooth-bridge-many 2026-11-17 19:59:55 -08:00
dotCooCoo 87be91d7fa Part of #6966: Path Precision Tools draws a bounding rectangle or circle around the selection
Object › Plug-ins › Path Precision Tools › Add Bounding Rectangle runs
addon.pathtools.boundingRectangle, which draws a live rectangle on the
selection's geometric bounding box, strokes left out. Add Bounding
Circle runs addon.pathtools.boundingCircle, which draws the smallest
live circle that holds the outlines of the selected objects. Paths and
compound paths count by their curves, clip groups and clipping
sublayers by their clipping paths, other sublayers by their shown
objects, images by their corners, and type and other objects by the
corners of their bounding box. Each curve is split until its pieces lie
within 0.01 pt of their chords (1,024 pieces at most, after which a
piece counts by its control points), and the circle's radius is 0.01 pt
larger than the smallest circle around those points, so it holds the
curves.

`offset` adds space around the objects, and `each` draws one shape
around each selected object instead of one around them all. Objects
with no outline, such as an empty group, and shapes with no size (the
rectangle around a straight horizontal line, the circle around a single
point) are not drawn; with `each`, `skipped` counts them.

The shapes get the current paint and go on top of the current layer or
of the isolated group, as Tangent Circle's circles do; inside an
isolated compound path they go beside it. The new shapes are selected,
and one undo removes them all.

The smallest circle is computed in the geometry crate
(shapes::enclosing_circle) from the convex hull of the points with a
fixed shuffle, relative to one of the points so small art far from the
origin keeps its exact circle. While the command gathers points from a
large selection, it keeps only the corners of their convex hull, which
bounds the memory it takes.

Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md,
ROADMAP. Menu labels in all 28 catalogs and messages in the 24
catalogs with complete messages.
2026-11-17 19:56:57 -08:00
BFlat bbf6165fc8 Merge pull request #8206 from dotCooCoo/feat/packaging-fold-preview
Packaging Tools: Fold Preview folds the blank in 3D with the printed art on its panels
2026-11-18 10:30:50 +07:00
BFlat 1380e9c480 Merge pull request #7675 from dotCooCoo/feat/unit-converter
Unit Converter: one length in every unit, read from and applied to the selection
2026-11-18 10:16:26 +07:00
dotCooCoo 21e0b780e7 Path Precision Tools: Common Tangents draws the lines from a point to a closed path
Common Tangents (addon.pathtools.commonTangents) now also takes a point,
a path of one anchor, together with a convex closed path. The lines run
from the point to where they touch the path: two from a point outside
it, one from a point on its outline (centered on the point and as long
as the path is wide along it, or the whole straight side the point lies
on), and none from a point inside, which leaves the document unchanged
and returns a warning. Centerline adds the line from the point to the
path's center. Every Tangents value gives the same lines; two points
are refused.

The geometry treats the point as an outline whose support value is
p . n, so the existing root search finds the lines.

Docs: docs/mcp.md, docs/target-app-parity.md, ROADMAP. The new warning
has a row in every catalog.
2026-11-17 18:03:55 -08:00
dotCooCoo 38a178154b Merge main into feat/smooth-bridge 2026-11-17 17:38:12 -08:00
dotCooCoo 1901799b76 Shapes: Circle Tool Options set what the Circle tool shows and where its anchors go
Double-clicking the Circle tool, or `tool.options {tool: "circle"}`, opens
Circle Tool Options. Show Center, Show Radii and Show Diameter switch the
center cross, the radius lines and the diameter label the tool shows while
a circle is drawn, and Color sets the color of the cross and the lines
(red, blue, magenta, green, black or gray). With Anchors at Standard
Positions off, the circle's anchors are at the points it was drawn
through, plus evenly spaced anchors between them so that no curve turns
more than a quarter of the circle. With Third Point by Dragging off, a
second click places the second point and a third click draws the circle
through the three; a double-click on the second point draws the circle on
the two. Every option is on by default, and the options are kept with the
preferences.

`shape.circleThroughPoints` takes `anchors: "standard"|"points"`.
`tool.setOption` rejects a value the Circle tool's options do not take.
2026-11-17 16:30:02 -08:00
dotCooCoo c1139c7a2d Tools: a Three-Point Arc tool draws an arc between two ends and a third point
The Three-Point Arc tool, after the Arc tool in the Line Segment tool's
group, places two ends by a drag or two clicks, then a third point. The
arc passes through the third point, or with Third Point Sets Direction on
it leaves the first end heading toward it, or with Alt arrives at the
second end along the line from it. The setting is in the tool's Tool
Options (a double-click on the tool), and ] switches it while drawing.
The tool previews the arc, its center and radius, and shows "Arc too
large" where no arc fits.

shape.threePointArc {start, end, through | toward, at?} draws the open
arc in one undo step and refuses points with no arc, malformed points,
both or neither of through and toward, an at other than start or end,
and an at given with through.

Part of #7178.
2026-11-17 13:41:29 -08:00
dotCooCoo e6ec393062 Shapes: the Circle tool draws a circle through two or three points
The Circle tool, in the Ellipse tool's flyout, draws a circle with
shape.circleThroughPoints. A drag from one point to another, or a click
on each, draws the circle with the two points as the ends of a diameter.
A click on a first point, then a press on a second point dragged to a
third, draws the circle through the three. Shift keeps the second point
at 45° steps from the first. For a circle on two points, Alt rounds the
diameter to the nearest ruler tick at the current zoom in the General
unit. Each point snaps to Smart Guides. Until the release the tool shows
the circle as a dashed outline (solid once it is more than 50,000 screen
points around), a cross at its center, a line from the center to each
point and, with Measurement Labels on, the diameter by the pointer.
Three different points on one line, or a circle past the canvas, show
"Circle too large" by the pointer instead, and the release draws
nothing. Escape, a dropped press, and an edit, Undo or Redo made outside
the tool drop the first point. A second press within 3 screen points of
the first point, or one that snaps to it, places nothing when let go
there, and draws the circle on the diameter it drags out when dragged.
Each circle is one undo step. The tool's icon is new and drawn for
VectorCraft.

shape.circleThroughPoints also takes two points, or two selected anchor
points, as the ends of a diameter. Its two errors about the number of
points now say "two or three", in every catalog that translates them.

Part of #7178.
2026-11-17 13:29:12 -08:00
dotCooCoo 4ab773494e Workspace: the Tools drop strip lights up where Tools docks, and the docs name the exceptions
With no panels docked on the left and a toolbar made with New Toolbar docked there, a drop on
the canvas's left edge docks Tools at the window's edge, left of the toolbar's lane. The strip
that lit up during the move was the canvas's edge, right of the lane. The window's edge now
lights up instead.

The window.toolsBesideCanvas params text, docs/control-protocol.md, docs/target-app-parity.md and
the UiState doc comment now say that a drop with no panels docked on the left, or in the column
both edges share beside panels collapsed to icons, leaves Window › Toolbars › Keep Tools Beside
the Canvas as it is. ROADMAP's progress log gets a line for the changed drop rule.

The test of a release where the move started now presses on the title bar, moves past the drag
threshold so the move starts, and releases within the travel limit over the canvas's edge; it
fails without that limit.
2026-11-17 08:41:27 -08:00
dotCooCoo b963e41e85 Merge main into feat/smooth-bridge-many 2026-11-16 22:14:28 -08:00
dotCooCoo 4911e102b1 Packaging Tools: Fold Preview folds the blank in 3D with the printed art on its panels
Fold Preview (Object › Plug-ins › Packaging Tools, and the Fold Lines panel's button) shows the
document's blank folded about its largest panel, or the panel double-clicked. Creases and
perforations fold 90° away from the printed side and partial cuts 90° toward it. Each panel
samples a raster of the print, with the fold lines and non-printing layers left out, through its
projective map, with a depth buffer; the back shows the board's inside color. The window has a
Fold slider, seven view presets, orbit, zoom, pan and perspective, and its status line reports a
joint that does not close and panels that pass through each other.

- addon.packaging.fold returns each panel's frame, the hinges with their angle and gap, and the
  collisions. A closing hinge's gap is measured with every hinge folded all the way.
- ui.foldPreview sets the window and rejects values of the wrong kind or out of range; saved
  settings out of range are brought into range.
- The print renders off the UI thread where a worker exists and once per document revision. The
  fold and the view image are worked out again only when the document, the settings or the
  window's size change.
2026-11-16 10:20:36 -08:00