Fix #3705: pastes go inside the object in Draw Inside, and Shift+D no longer stops at Draw Behind

The drawing-modes help page
(https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/learn-drawing-basics/drawing-modes-overview.html)
has you draw or paste into the selected object in Draw Inside. It also says
the modes apply to Paste in Place and Paste on All Artboards but not to Paste
in Front or Paste in Back.

Cause: only new art (create::insert_look) read the drawing mode. The paste
commands (edit::paste_clip) always used the insertion parent, so a paste in
Draw Inside landed on the layer above the object, outside the clip.
Double-clicking the object first only isolated the bare path, which didn't
change where the paste went. Separately, view.drawMode {} went from Draw
Behind to Draw Inside whenever one object was selected, then refused it unless
the object was a path, compound path or type. So with one group selected
(such as the clip group Draw Inside makes), Shift+D and the toolbar button
failed every time and stayed in Draw Behind.

Change: the clip-group wrapping moves into create::draw_inside_group, which
new art and pastes now share. In Draw Inside, Paste, Paste in Place and Paste
on All Artboards insert the copies at the top of that group, in the paste's
one undo step, ignoring Paste Remembers Layers. In Draw Behind, Paste in Place
and Paste on All Artboards go just below the selection, as Paste in Back does.
Paste in Front, Paste in Back and pasted artboards keep their placement.
Shift+D goes on to Draw Inside only when it can draw into the selection, and
otherwise back to Draw Normal.

Verification: pasting_in_draw_inside_puts_the_copies_inside_the_object,
paste_in_place_in_draw_behind_goes_behind_the_selection and
shift_d_goes_past_draw_behind_whatever_is_selected all fail without the
change ("Layer" != "Clip Group"; index 3 != 0; the Draw Inside error on a
selected group). cargo xtask ci: all 10 steps passed.
This commit is contained in:
Taha-Mahmoodi authored and bflatastic committed 2026-10-23 09:56:07 +07:00
1 parent a537a1b5bd
commit eb4635fd4b
7 files changed
+198 -49

No files matched your search

+40 -27
View File
@@ -73,7 +73,7 @@ pub fn specs() -> Vec<CommandSpec> {
"Drawing Mode",
[],
Some("Shift+D"),
"{mode?: normal|behind|inside} (no param cycles; inside needs one selected path)",
"{mode?: normal|behind|inside} (inside needs one selected path, compound path or type; no param cycles normal → behind → inside → normal, going from behind back to normal when Draw Inside can't draw into the selection)",
has_doc,
draw_mode
),
@@ -157,23 +157,7 @@ fn insert_look_turned(
n.bbox_angle = bbox_angle;
match (mode, inside) {
(crate::DrawMode::Inside, Some(target)) if d.node(target).is_some() => {
// Wrap the target once in a clip group [mask copy, target, …new art].
let group = match d.parent_of(target).and_then(|p| d.node(p).map(|pn| (p, pn.kind.clone()))) {
Some((p, NodeKind::Group { clip: true, children })) if children.get(1).is_some_and(|c| c.id == target) => p,
_ => {
let (par, idx, _) = d.position(target).ok_or(crate::EngineError::NoNode(target))?;
let mut mask = d.node(target).cloned().ok_or(crate::EngineError::NoNode(target))?;
mask.id = d.alloc_id();
mask.appearance = Appearance::basic(vectorcraft_color::Paint::None, vectorcraft_color::Paint::None, 0.0).into();
if let NodeKind::Path { clipping, .. } = &mut mask.kind {
*clipping = true;
}
let gid = d.alloc_id();
d.insert(par, idx + 1, Node::new(gid, NodeKind::Group { children: vec![std::sync::Arc::new(mask)], clip: true }))?;
d.move_node(target, Some(gid), usize::MAX)?;
gid
}
};
let group = draw_inside_group(d, target)?;
d.insert(Some(group), usize::MAX, n)?;
}
(crate::DrawMode::Behind, _) => match behind_of.and_then(|b| d.position(b)) {
@@ -196,27 +180,56 @@ fn insert_look_turned(
Ok(json!({ "id": id.0 }))
}
/// Draw Inside's clip group for `target`, the object new art goes inside: the clip group
/// [mask copy, target, …] `target` already is the clipped object of, else one made where `target`
/// was, holding an unpainted clipping copy of it and then `target`. New art and pastes go on top
/// of its children.
pub(crate) fn draw_inside_group(d: &mut vectorcraft_doc::Document, target: NodeId) -> Result<NodeId> {
if let Some(p) = d.parent_of(target)
&& d.node(p).is_some_and(|pn| matches!(&pn.kind, NodeKind::Group { clip: true, children } if children.get(1).is_some_and(|c| c.id == target)))
{
return Ok(p);
}
let (par, idx, _) = d.position(target).ok_or(crate::EngineError::NoNode(target))?;
let mut mask = d.node(target).cloned().ok_or(crate::EngineError::NoNode(target))?;
mask.id = d.alloc_id();
mask.appearance = Appearance::basic(vectorcraft_color::Paint::None, vectorcraft_color::Paint::None, 0.0).into();
if let NodeKind::Path { clipping, .. } = &mut mask.kind {
*clipping = true;
}
let gid = d.alloc_id();
d.insert(par, idx + 1, Node::new(gid, NodeKind::Group { children: vec![std::sync::Arc::new(mask)], clip: true }))?;
d.move_node(target, Some(gid), usize::MAX)?;
Ok(gid)
}
/// The object Draw Inside would draw into: the one selected object, when it is a path, a compound
/// path or type.
fn inside_target(st: &crate::DocState) -> Option<NodeId> {
let first = st.selection.objects.first().copied()?;
let fits = matches!(st.doc.node(first).map(|n| &n.kind), Some(NodeKind::Path { .. } | NodeKind::Compound { .. } | NodeKind::Text(_)));
(fits && st.selection.len() == 1).then_some(first)
}
fn draw_mode(s: &mut Session, p: &Value) -> Result<Value> {
let mode = match str_param(p, "mode") {
Some("behind") => crate::DrawMode::Behind,
Some("inside") => crate::DrawMode::Inside,
Some("normal") => crate::DrawMode::Normal,
// Cycling (Shift+D): Draw Behind goes on to Draw Inside only when it can draw inside the
// selection, else back to Draw Normal (#3705: with one group selected it stayed in Draw
// Behind).
None => match s.draw_mode {
crate::DrawMode::Normal => crate::DrawMode::Behind,
crate::DrawMode::Behind if s.doc()?.selection.len() == 1 => crate::DrawMode::Inside,
crate::DrawMode::Behind if inside_target(s.doc()?).is_some() => crate::DrawMode::Inside,
_ => crate::DrawMode::Normal,
},
Some(o) => return Err(bad("view.drawMode", format!("unknown mode `{o}`"))),
};
if mode == crate::DrawMode::Inside {
let st = s.doc()?;
let target =
st.selection.objects.first().copied().filter(|id| {
matches!(st.doc.node(*id).map(|n| &n.kind), Some(NodeKind::Path { .. } | NodeKind::Compound { .. } | NodeKind::Text(_)))
});
match target {
Some(t) if st.selection.len() == 1 => s.draw_inside = Some(t),
_ => return Err(bad("view.drawMode", "Draw Inside needs exactly one selected path, compound path or text")),
match inside_target(s.doc()?) {
Some(t) => s.draw_inside = Some(t),
None => return Err(bad("view.drawMode", "Draw Inside needs exactly one selected path, compound path or text")),
}
} else {
s.draw_inside = None;
+29 -17
View File
@@ -119,7 +119,7 @@ pub fn specs() -> Vec<CommandSpec> {
"Paste",
["Edit"],
Some("Cmd+V"),
"{center?: [x, y], dx?, dy?, swatchConflict?} paste centred on `center` (the app passes the view centre), else offset by dx/dy (default: the Paste Offset preference). Pasting brings the image blobs, symbols, patterns, global and spot swatches (with the tint swatches of the tints used), gradient swatches, graphic styles, character and paragraph styles and brushes the objects use; one of the same name that differs comes in renamed. swatchConflict, for a swatch whose name the document gives another colour (clipboard.conflicts): \"merge\" (default: the objects take the document's swatch) | \"add\" (the pasted swatch comes in renamed) | {name: \"merge\"|\"add\"}. With Paste Remembers Layers on (layer.pasteRemembersLayers), objects go back into the layers they came from (by name; made when missing). Artboards copied with artboard.copy come with their art, together right of the last artboard as they lay (the other paste commands but Paste on All Artboards: where they were), their art back in the layers it came from, and the Artboard tool, when chosen, selects them → {ids, artboard: the first new artboard's index or null, artboards: the new artboards' indices, added: resources added, merged: conflicts merged, renamed: [{kind, from, to}]}",
"{center?: [x, y], dx?, dy?, swatchConflict?} paste centred on `center` (the app passes the view centre), else offset by dx/dy (default: the Paste Offset preference). Pasting brings the image blobs, symbols, patterns, global and spot swatches (with the tint swatches of the tints used), gradient swatches, graphic styles, character and paragraph styles and brushes the objects use; one of the same name that differs comes in renamed. swatchConflict, for a swatch whose name the document gives another colour (clipboard.conflicts): \"merge\" (default: the objects take the document's swatch) | \"add\" (the pasted swatch comes in renamed) | {name: \"merge\"|\"add\"}. With Paste Remembers Layers on (layer.pasteRemembersLayers), objects go back into the layers they came from (by name; made when missing). Artboards copied with artboard.copy come with their art, together right of the last artboard as they lay (the other paste commands but Paste on All Artboards: where they were), their art back in the layers it came from, and the Artboard tool, when chosen, selects them. In Draw Inside (view.drawMode) the objects go inside the object drawn into, as new art does, and Paste Remembers Layers doesn't apply; edit.pasteInPlace and edit.pasteOnAllArtboards do the same, and in Draw Behind they go behind the selection as edit.pasteInBack puts them; edit.pasteInFront and edit.pasteInBack ignore the drawing mode → {ids, artboard: the first new artboard's index or null, artboards: the new artboards' indices, added: resources added, merged: conflicts merged, renamed: [{kind, from, to}]}",
has_clipboard,
|s, p| paste(s, p, PasteMode::Offset)
),
@@ -146,7 +146,7 @@ pub fn specs() -> Vec<CommandSpec> {
"Paste in Place",
["Edit"],
Some("Cmd+Shift+V"),
"{swatchConflict?, artboard?: index (as edit.pasteInFront)} paste where the objects were copied (resources and layers as edit.paste) → {ids, added, merged, renamed}",
"{swatchConflict?, artboard?: index (as edit.pasteInFront)} paste where the objects were copied (resources, layers and drawing modes as edit.paste) → {ids, added, merged, renamed}",
has_clipboard,
|s, p| paste(s, p, PasteMode::InPlace)
),
@@ -155,7 +155,7 @@ pub fn specs() -> Vec<CommandSpec> {
"Paste on All Artboards",
["Edit"],
Some("Cmd+Alt+Shift+V"),
"{swatchConflict?} paste a copy on every artboard at the offset the objects had to the artboard they were copied from (resources and layers as edit.paste) → {ids, added, merged, renamed}",
"{swatchConflict?} paste a copy on every artboard at the offset the objects had to the artboard they were copied from (resources, layers and drawing modes as edit.paste) → {ids, added, merged, renamed}",
has_clipboard,
|s, p| paste(s, p, PasteMode::AllArtboards)
),
@@ -686,21 +686,29 @@ fn paste_clip(s: &mut Session, p: &Value, mode: PasteMode, clip: &Clipboard, cho
.reduce(|a, b| a.union(b))
.filter(|_| mode != PasteMode::AllArtboards)
.map(|all| (&clip.artboards, if mode == PasteMode::Offset { super::panelcmds::beside_artboards(&st.doc, all) } else { Vec2::ZERO }));
// Paste Remembers Layers (not while isolating a group: pastes stay in it); an artboard's art
// always goes back into its layers.
// Drawing modes (#3705): Draw Inside puts what Paste, Paste in Place and Paste on All
// Artboards bring inside the object it draws into; Draw Behind puts what Paste in Place and
// Paste on All Artboards bring behind the selection, as Paste in Back does. Paste in Front and
// Paste in Back keep their own places, and copied artboards' art goes back into its layers.
let modal = boards.is_none() && matches!(mode, PasteMode::Offset | PasteMode::InPlace | PasteMode::AllArtboards);
let inside = s.draw_inside.filter(|t| modal && s.draw_mode == crate::DrawMode::Inside && st.doc.node(*t).is_some());
let behind = modal && mode != PasteMode::Offset && s.draw_mode == crate::DrawMode::Behind;
let (front, back) = (mode == PasteMode::Front, mode == PasteMode::Back || behind);
// Paste Remembers Layers (not while isolating a group: pastes stay in it, nor in Draw
// Inside); an artboard's art always goes back into its layers.
// A drop goes into the current editable insertion context, not a same-named source layer.
let remember = mode != PasteMode::Drag
&& inside.is_none()
&& (st.doc.paste_remembers_layers || boards.is_some())
&& parent.is_some_and(|p| st.doc.node(p).is_some_and(Node::is_layer));
// Front/back: relative to the selection (top-most / bottom-most selected object); with
// nothing selected, the top / bottom of the current layer.
let anchor = match mode {
PasteMode::Front | PasteMode::Back => {
let order = st.selection.in_paint_order(&st.doc);
let a = if mode == PasteMode::Front { order.last() } else { order.first() };
a.and_then(|id| st.doc.position(*id))
}
_ => None,
let anchor = if front || back {
let order = st.selection.in_paint_order(&st.doc);
let a = if front { order.last() } else { order.first() };
a.and_then(|id| st.doc.position(*id))
} else {
None
};
let placements: Vec<Affine> = match (mode, boards) {
(_, Some((_, dv))) => vec![Affine::translate(dv)],
@@ -717,6 +725,8 @@ fn paste_clip(s: &mut Session, p: &Value, mode: PasteMode, clip: &Clipboard, cho
};
let (ids, imported, artboards) = s.edit(mode.label(), |d, sel| {
let imported = clip.import_into(d, choices, same_doc);
// Draw Inside: the clip group of the object drawn into, made on the first paste.
let into = inside.map(|t| super::create::draw_inside_group(d, t)).transpose()?;
let artboards: Vec<usize> = boards
.into_iter()
.flat_map(|(all, dv)| all.iter().map(move |a| (a, dv)))
@@ -739,15 +749,17 @@ fn paste_clip(s: &mut Session, p: &Value, mode: PasteMode, clip: &Clipboard, cho
Some(Some(name)) if remember => Some(*layers.entry(name).or_insert_with(|| layer_named(d, name))),
_ => None,
};
let (par, idx) = match (anchor, layer) {
let (par, idx) = match (into, anchor, layer) {
// Inside the object Draw Inside draws into, on top of what is in it already.
(Some(group), ..) => (Some(group), usize::MAX),
// Next to the anchor, unless the object goes back to another layer.
(Some((par, i, _)), l) if l.is_none() || l == par => {
(None, Some((par, i, _)), l) if l.is_none() || l == par => {
let k = placed.get(&par).copied().unwrap_or(0);
(par, if mode == PasteMode::Front { i + 1 + k } else { i + k })
(par, if front { i + 1 + k } else { i + k })
}
(_, l) => {
(None, _, l) => {
let par = l.or(parent);
(par, if mode == PasteMode::Back { placed.get(&par).copied().unwrap_or(0) } else { usize::MAX })
(par, if back { placed.get(&par).copied().unwrap_or(0) } else { usize::MAX })
}
};
*placed.entry(par).or_default() += 1;
+114
View File
@@ -148,6 +148,120 @@ fn double_clicking_outside_the_draw_inside_object_returns_to_draw_normal() {
assert_eq!(double(&mut s, 150.0, 150.0), (DrawMode::Normal, None));
}
/// #3705: in Draw Inside, Paste, Paste in Place and Paste on All Artboards put the copies inside
/// the object drawn into, as drawn art goes, each paste one undo step; the first one makes the
/// clip group and the next ones add to it, with Paste Remembers Layers on and with the object
/// isolated by a double-click too. Paste in Front and Paste in Back keep their places.
#[test]
fn pasting_in_draw_inside_puts_the_copies_inside_the_object() {
let mut s = Session::new();
s.execute("file.new", &json!({"width": 400, "height": 300, "artboards": 2})).unwrap();
let a = s.execute("shape.rectangle", &json!({"x": 100, "y": 100, "width": 100, "height": 100})).unwrap()["id"].as_u64().unwrap();
s.execute("shape.ellipse", &json!({"x": 20, "y": 20, "width": 50, "height": 50})).unwrap();
s.execute("edit.copy", &json!({})).unwrap();
s.execute("select.set", &json!({"ids": [a]})).unwrap();
s.execute("view.drawMode", &json!({"mode": "inside"})).unwrap();
let parent = |s: &Session, id: u64| s.doc().unwrap().doc.parent_of(NodeId(id));
let pasted = |r: Value| r["ids"].as_array().unwrap().iter().map(|v| v.as_u64().unwrap()).collect::<Vec<_>>();
let before = s.doc().unwrap().doc.clone();
let undo = s.doc().unwrap().history.undo.len();
let ids = pasted(s.execute("edit.paste", &json!({"center": [150, 150]})).unwrap());
let g = parent(&s, a).unwrap();
assert_eq!(s.doc().unwrap().doc.node(g).unwrap().kind_label(), "Clip Group");
assert_eq!(parent(&s, ids[0]), Some(g), "the copy is inside the object");
assert_eq!(s.doc().unwrap().history.undo.len(), undo + 1);
s.execute("edit.undo", &json!({})).unwrap();
assert_eq!(*s.doc().unwrap().doc, *before, "one undo step takes the copy and the clip group away");
s.execute("edit.redo", &json!({})).unwrap();
// Paste in Place and Paste on All Artboards (one copy per artboard) go into the same group,
// on top of what is in it.
let in_place = pasted(s.execute("edit.pasteInPlace", &json!({})).unwrap());
let all = pasted(s.execute("edit.pasteOnAllArtboards", &json!({})).unwrap());
assert_eq!(all.len(), 2);
let children: Vec<u64> = s.doc().unwrap().doc.node(g).unwrap().children().unwrap().iter().map(|n| n.id.0).collect();
assert_eq!(children.len(), 6, "{children:?}");
assert_eq!(children[1..], [a, ids[0], in_place[0], all[0], all[1]]);
// Paste Remembers Layers doesn't take the copy out of the object.
s.execute("layer.pasteRemembersLayers", &json!({"on": true})).unwrap();
let remembered = pasted(s.execute("edit.paste", &json!({})).unwrap());
assert_eq!(parent(&s, remembered[0]), Some(g));
// Paste in Front and Paste in Back ignore the drawing mode: next to the selection.
s.execute("layer.pasteRemembersLayers", &json!({"on": false})).unwrap();
s.execute("select.set", &json!({"ids": [a]})).unwrap();
let front = pasted(s.execute("edit.pasteInFront", &json!({})).unwrap());
assert_eq!(parent(&s, front[0]), Some(g));
let d = &s.doc().unwrap().doc;
let at = |id: u64| d.position(NodeId(id)).unwrap().1;
assert_eq!(at(front[0]), at(a) + 1, "just above the selected object");
// The object isolated (a double-click with the Selection tool) before anything went inside.
let mut s = session();
let b = s.execute("shape.rectangle", &json!({"x": 100, "y": 100, "width": 100, "height": 100})).unwrap()["id"].as_u64().unwrap();
s.execute("shape.ellipse", &json!({"x": 20, "y": 20, "width": 50, "height": 50})).unwrap();
s.execute("edit.copy", &json!({})).unwrap();
s.execute("select.set", &json!({"ids": [b]})).unwrap();
s.execute("view.drawMode", &json!({"mode": "inside"})).unwrap();
s.select_tool("selection", ViewInfo::default()).unwrap();
s.pointer(&vectorcraft_tools::PointerEvent::new(vectorcraft_tools::PointerKind::DoubleClick, 150.0, 150.0), ViewInfo::default()).unwrap();
assert_eq!(s.doc().unwrap().isolation, Some(NodeId(b)));
let ids = pasted(s.execute("edit.paste", &json!({})).unwrap());
let g = parent(&s, b).unwrap();
assert_eq!((s.doc().unwrap().doc.node(g).unwrap().kind_label(), parent(&s, ids[0])), ("Clip Group", Some(g)));
}
/// In Draw Behind, Paste in Place and Paste on All Artboards put the copies just below the
/// selection, as Paste in Back does; Paste puts them on top, as in Draw Normal.
#[test]
fn paste_in_place_in_draw_behind_goes_behind_the_selection() {
let mut s = session();
let a = s.execute("shape.rectangle", &json!({"x": 100, "y": 100, "width": 100, "height": 100})).unwrap()["id"].as_u64().unwrap();
s.execute("shape.ellipse", &json!({"x": 20, "y": 20, "width": 50, "height": 50})).unwrap();
s.execute("edit.copy", &json!({})).unwrap();
s.execute("select.set", &json!({"ids": [a]})).unwrap();
s.execute("view.drawMode", &json!({"mode": "behind"})).unwrap();
let order = |s: &Session| s.doc().unwrap().doc.layers[0].children().unwrap().iter().map(|n| n.id.0).collect::<Vec<_>>();
let first = |r: Value| r["ids"][0].as_u64().unwrap();
let placed = first(s.execute("edit.pasteInPlace", &json!({})).unwrap());
let o = order(&s);
let at = |id: u64| o.iter().position(|x| *x == id).unwrap();
assert_eq!(at(placed) + 1, at(a), "just below the selected rectangle: {o:?}");
s.execute("select.set", &json!({"ids": [a]})).unwrap();
let all = first(s.execute("edit.pasteOnAllArtboards", &json!({})).unwrap());
let o = order(&s);
let at = |id: u64| o.iter().position(|x| *x == id).unwrap();
assert_eq!(at(all) + 1, at(a), "{o:?}");
s.execute("select.set", &json!({"ids": [a]})).unwrap();
let pasted = first(s.execute("edit.paste", &json!({})).unwrap());
assert_eq!(order(&s).last(), Some(&pasted), "Paste: on top");
}
/// #3705: Shift+D (`view.drawMode {}`) goes Draw Normal → Draw Behind → Draw Inside → Draw Normal
/// with one path selected, and from Draw Behind back to Draw Normal when Draw Inside can't draw
/// into the selection: one group (such as the clip group Draw Inside made), one image, several
/// objects or none. It used to stop at Draw Behind with one object selected that isn't a path,
/// compound path or type.
#[test]
fn shift_d_goes_past_draw_behind_whatever_is_selected() {
let mut s = session();
let a = s.execute("shape.rectangle", &json!({"x": 0, "y": 0, "width": 100, "height": 100})).unwrap()["id"].as_u64().unwrap();
let b = s.execute("shape.ellipse", &json!({"x": 120, "y": 0, "width": 50, "height": 50})).unwrap()["id"].as_u64().unwrap();
let cycle = |s: &mut Session| (0..3).map(|_| s.execute("view.drawMode", &json!({})).map(|r| r["mode"].clone()).unwrap()).collect::<Vec<_>>();
s.execute("select.set", &json!({"ids": [a]})).unwrap();
assert_eq!(cycle(&mut s), [json!("behind"), json!("inside"), json!("normal")]);
s.execute("select.set", &json!({"ids": [a, b]})).unwrap();
assert_eq!(cycle(&mut s), [json!("behind"), json!("normal"), json!("behind")]);
s.execute("view.drawMode", &json!({"mode": "normal"})).unwrap();
let g = s.execute("object.group", &json!({})).unwrap()["id"].as_u64().unwrap();
s.execute("select.set", &json!({"ids": [g]})).unwrap();
assert_eq!(cycle(&mut s), [json!("behind"), json!("normal"), json!("behind")], "one group selected");
assert!(s.draw_inside.is_none());
s.execute("view.drawMode", &json!({"mode": "normal"})).unwrap();
s.execute("select.none", &json!({})).unwrap();
assert_eq!(cycle(&mut s), [json!("behind"), json!("normal"), json!("behind")]);
// Asked for by name, Draw Inside is still refused without a path, compound path or type.
s.execute("select.set", &json!({"ids": [g]})).unwrap();
assert!(s.execute("view.drawMode", &json!({"mode": "inside"})).is_err());
}
#[test]
fn export_for_screens_writes_every_combination() {
let mut s = Session::new();
+3 -1
View File
@@ -1,6 +1,6 @@
# Gaps
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-10-23 · **Change:** minor (Artboard Options: Show Center Mark and Show Cross Hairs (`artboard.setProps`/`artboard.new` `showCenterMark`, `showCrossHairs`) draw a center cross and lines from the middle of each side through the center on the canvas only, in one undo step; video safe areas, video rulers and the pixel aspect ratio remain missing; G2: the Effect Gallery shipped (#2883): Effect › Effect Gallery… browses the Artistic, Brush Strokes, Distort, Sketch, Stylize and Texture filters, edits each filter's settings, builds an ordered stack (add, reorder, hide, remove) with a live canvas preview, and OK applies it as separate appearance effects in one undo step; remaining: filter thumbnails and a preview area inside the dialog; G2 estimate 4–6 → 1–2 h; Raster effects 82% → 85% (power-user view 49% → 52%), estimated, a modest move because the named missing dialog landed without thumbnails or an in-dialog preview; previously: G4: colour emoji fonts with bitmap glyphs (`sbix`: Apple Color Emoji; `CBDT`: Noto Color Emoji) draw on the canvas and export: PDF Type 3 glyphs or images, SVG images with outlined text, EPS and legacy `.ai` images, Create Outlines images; COLR and OpenType SVG fonts remain; estimate unchanged; G13: gradient Dither (Illustrator 30.0): a Dither box in the Gradient panel (`paint.editGradient`/`paint.setFill` `dither`, saved in the native file) draws a linear or radial gradient fill with seeded fine noise that hides banding, on the canvas and in raster exports; SVG and PDF exports write the fill as an image at the Document Raster Effects resolution, as the public documentation describes dither; fills only, as documented; score and hours unchanged; G2: Effect › Sketch › Conté Crayon (Foreground Level, Background Level, Texture, Scaling, Relief, Light Direction, Invert; a black crayon in the dark areas and a white one in the light areas on textured mid-grey paper; ranges and defaults unverified VectorCraft choices); measured Photoshop-style filters 57/57, the Effect Gallery remains (4–6 h); Affinity import AF.5: master pages, tables, paragraph formats, shadows, glows, outlines, overlays and embedded documents; Recolor Artwork Edit chips scroll within the available screen height (#3416); small palettes retain their tab height; scores and estimates unchanged; Blend panel Type and Ramp control step easing with a separate color Shift (#2539); Blend Options retains spacing and orientation; polynomial curves are original approximations; Shape Builder Gap Detection shares Live Paint’s spatial gap finder and temporary merge bridges (#2526); Custom is capped at 72 pt in the existing options dialog; filter plug-ins read and set effect records and stroke joins, caps and miter limits, G17; 3D: original Standard, Diffuse, Top Left and Right lighting presets; command access, effective-setting recognition and preview/history; scores and estimates unchanged; G1: one selected clip group's Properties panel has Edit Clipping Path and Edit Contents at its top; the selection tools take a clipping path on its outline, over the art it clips; Polygon and Star exact-size placement remembers the chosen count for later drags and dialog openings; Cancel preserves the previous count; Live trace result bounds and selection highlights exclude the retained bitmap except in source-image views; live-effect plug-ins given their object's fills and strokes and the item they sit on, G17; plug-in parameters: labels, units, groups, help and conditions in their dialogs, text and number-list parameters, up to 256 of them, G17; exporter plug-ins: plug-in file formats in Export As and document.export, G17; G2: Effect › Artistic › Smudge Stick, Sponge and Watercolor; Sketch › Bas Relief, Charcoal, Photocopy and Stamp, #2533; Photoshop filters 45/57, 12 remaining (8–14 h); on-canvas Mirror Repeat axis, #2877; G12: Background Export progress dialog with Cancel, #2564; status-readout sample widths cached by language, document unit and pixels per point; status messages and readouts use stable responsive allocations sized for localized labels and ordinary coordinates; cached canvas dimensions match the renderer limit before cache-key creation, view construction and worker submission; cached canvas reprojection preserves scale during resize, rotation and DPI changes; on-canvas Mirror Repeat axis, #2877; G12: Background Export progress dialog with Cancel, #2564; 3D lighting: one to ten colored lights, smooth colored Inflate, legacy white-light appearance preserved; surface batching and restored seam minimum; scores and estimates unchanged; Blend spine Anchor Point conversions, selection/stacking priority and Shift regression coverage (#2544); scores and hours unchanged; transparency grid visibility saved in native documents, #1968; G6: MCP cancellation, progress notifications and busy answers during long exports, #2165, #2171, #2172; EPS editing data: leLine truncated
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-10-23 · **Change:** minor (Fix #3705 in part: drawing modes apply to pastes (Draw Inside puts Paste, Paste in Place and Paste on All Artboards inside the object drawn into; Draw Behind puts Paste in Place and Paste on All Artboards behind the selection), and Shift+D goes from Draw Behind back to Draw Normal when Draw Inside can't draw into the selection instead of stopping at Draw Behind; G2: the Effect Gallery shipped (#2883): Effect › Effect Gallery… browses the Artistic, Brush Strokes, Distort, Sketch, Stylize and Texture filters, edits each filter's settings, builds an ordered stack (add, reorder, hide, remove) with a live canvas preview, and OK applies it as separate appearance effects in one undo step; remaining: filter thumbnails and a preview area inside the dialog; G2 estimate 4–6 → 1–2 h; Raster effects 82% → 85% (power-user view 49% → 52%), estimated, a modest move because the named missing dialog landed without thumbnails or an in-dialog preview; previously: G4: colour emoji fonts with bitmap glyphs (`sbix`: Apple Color Emoji; `CBDT`: Noto Color Emoji) draw on the canvas and export: PDF Type 3 glyphs or images, SVG images with outlined text, EPS and legacy `.ai` images, Create Outlines images; COLR and OpenType SVG fonts remain; estimate unchanged; G13: gradient Dither (Illustrator 30.0): a Dither box in the Gradient panel (`paint.editGradient`/`paint.setFill` `dither`, saved in the native file) draws a linear or radial gradient fill with seeded fine noise that hides banding, on the canvas and in raster exports; SVG and PDF exports write the fill as an image at the Document Raster Effects resolution, as the public documentation describes dither; fills only, as documented; score and hours unchanged; G2: Effect › Sketch › Conté Crayon (Foreground Level, Background Level, Texture, Scaling, Relief, Light Direction, Invert; a black crayon in the dark areas and a white one in the light areas on textured mid-grey paper; ranges and defaults unverified VectorCraft choices); measured Photoshop-style filters 57/57, the Effect Gallery remains (4–6 h); Affinity import AF.5: master pages, tables, paragraph formats, shadows, glows, outlines, overlays and embedded documents; Recolor Artwork Edit chips scroll within the available screen height (#3416); small palettes retain their tab height; scores and estimates unchanged; Blend panel Type and Ramp control step easing with a separate color Shift (#2539); Blend Options retains spacing and orientation; polynomial curves are original approximations; Shape Builder Gap Detection shares Live Paint’s spatial gap finder and temporary merge bridges (#2526); Custom is capped at 72 pt in the existing options dialog; filter plug-ins read and set effect records and stroke joins, caps and miter limits, G17; 3D: original Standard, Diffuse, Top Left and Right lighting presets; command access, effective-setting recognition and preview/history; scores and estimates unchanged; G1: one selected clip group's Properties panel has Edit Clipping Path and Edit Contents at its top; the selection tools take a clipping path on its outline, over the art it clips; Polygon and Star exact-size placement remembers the chosen count for later drags and dialog openings; Cancel preserves the previous count; Live trace result bounds and selection highlights exclude the retained bitmap except in source-image views; live-effect plug-ins given their object's fills and strokes and the item they sit on, G17; plug-in parameters: labels, units, groups, help and conditions in their dialogs, text and number-list parameters, up to 256 of them, G17; exporter plug-ins: plug-in file formats in Export As and document.export, G17; G2: Effect › Artistic › Smudge Stick, Sponge and Watercolor; Sketch › Bas Relief, Charcoal, Photocopy and Stamp, #2533; Photoshop filters 45/57, 12 remaining (8–14 h); on-canvas Mirror Repeat axis, #2877; G12: Background Export progress dialog with Cancel, #2564; status-readout sample widths cached by language, document unit and pixels per point; status messages and readouts use stable responsive allocations sized for localized labels and ordinary coordinates; cached canvas dimensions match the renderer limit before cache-key creation, view construction and worker submission; cached canvas reprojection preserves scale during resize, rotation and DPI changes; on-canvas Mirror Repeat axis, #2877; G12: Background Export progress dialog with Cancel, #2564; 3D lighting: one to ten colored lights, smooth colored Inflate, legacy white-light appearance preserved; surface batching and restored seam minimum; scores and estimates unchanged; Blend spine Anchor Point conversions, selection/stacking priority and Shift regression coverage (#2544); scores and hours unchanged; transparency grid visibility saved in native documents, #1968; G6: MCP cancellation, progress notifications and busy answers during long expLine truncated
## Feature submission evidence
@@ -103,6 +103,7 @@ from G14 and the budget run of G15: **~170–270 h** one agent, ~50–80 h wall
- **Done:** double-click a stroked segment to create a width point through Width Point Edit. Opening, Cancel and deleting the prospective point preserve the document and history; OK creates the point and optionally adjusts adjoining widths in one undo step. Regression and visual evidence: [Width-point creation](target-app-parity.md#evidence-what-ships-today-by-area).
- **Done:** Shift-double-click opens Width Point Edit with adjoining adjustment enabled. Plain double-click retains the default; dispatch, neighboring widths, Undo/Redo and Cancel have regression coverage.
- **Done (#1227):** object clicks with the Artboard tool create a fitted artboard, preserving art and selection; handles, modified clicks and drags retain their meaning. Covered by tool-event regression tests and undo/cancellation checks.
- **Done (#3705, in part):** pastes follow the drawing mode ([drawing modes](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/learn-drawing-basics/drawing-modes-overview.html)): Draw Inside takes Paste, Paste in Place and Paste on All Artboards inside the object drawn into, Draw Behind puts Paste in Place and Paste on All Artboards behind the selection, and Shift+D no longer stops at Draw Behind when one group or other non-path object is selected.
- **Done:** Artboard Options' Show Center Mark and Show Cross Hairs ([public source](https://helpx.adobe.com/illustrator/desktop/create-manage-artboards/organize-manage-artboards/modify-display-settings-of-artboards.html)): per-artboard checkboxes (`artboard.setProps`/`artboard.new` `showCenterMark`, `showCrossHairs`) that the canvas draws as a center cross and lines from the middle of each side through the center; exports and print leave them out. Video safe areas, video rulers and the pixel aspect ratio remain missing.
- **Done:** Document Setup → Edit Artboards applies valid settings, closes the dialog and activates the Artboard tool. Pointer-click tests cover successful handoff, invalid settings, OK, Cancel and Undo in `dialogs/document_setup.rs`.
@@ -563,6 +564,7 @@ separate. Scores and hours unchanged. [Behavior and command details](development
| 2026-10-22 | minor | G11: the Transform effect has Transform Objects, Transform Patterns and Scale Strokes & Effects, its checkboxes visible (#885); canvas, export and Expand Appearance agree. A Transform in a fill's or stroke's own effects ignores the two options. Estimate unchanged. |
| 2026-10-23 | minor | G4: COLR colour fonts (v0 and v1) draw and export as vector art; paints documents lack (sweep gradients, Porter-Duff compositing, radial gradients from a circle, repeating gradients) draw the glyph as an image; OpenType SVG fonts remain; estimate unchanged. |
| 2026-10-18 | minor | G11: Shape Builder on art of thousands of segments (traced outlines, type outlines): lines cut it again past 4,096 segments, where the planar map used to give up and the tool offered whole shapes (#937's reproduced case; the planar map's edge-source and face lookups were quadratic in the segments, now indexed, and the cap is 65,536); estimate unchanged until confirmed on the reporter's file |
| 2026-10-23 | minor | Fix #3705 in part: drawing modes apply to pastes (Draw Inside puts Paste, Paste in Place and Paste on All Artboards inside the object drawn into; Draw Behind puts Paste in Place and Paste on All Artboards behind the selection), and Shift+D goes from Draw Behind back to Draw Normal when Draw Inside can't draw into the selection instead of stopping at Draw Behind; scores and estimates unchanged. |
| 2026-10-23 | minor | Artboard Options: Show Center Mark and Show Cross Hairs (`artboard.setProps`/`artboard.new` `showCenterMark`, `showCrossHairs`) draw a center cross and lines from the middle of each side through the center on the canvas only, in one undo step; video safe areas, video rulers and the pixel aspect ratio remain missing; scores and estimates unchanged. |
| 2026-10-23 | minor | G11: Simplify: Object › Path › Simplify opens its slider at the Auto-Simplify level for the selection, previewing that result, instead of at 1 pt; partial-path simplify remains missing; estimates unchanged |
| 2026-10-22 | minor | G8: stacked geometry effects make at most 2 million anchors of a path and about 8 million lines to draw: Roughen, Zig Zag, Free Distort, Twist, the warps and Transform build within it, and an effect that would still pass it is left out (#3578). No entry closed, estimates unchanged. |
+5 -1
View File
@@ -2961,7 +2961,11 @@ Placement: `edit.paste {center}` centres the objects on a point (the app passes
by `dx`/`dy` (the Paste Offset preference). With nothing selected, `edit.pasteInFront` / `edit.pasteInBack` put them
on top / at the bottom of the current layer. `edit.pasteOnAllArtboards` keeps their offset to the artboard they were
copied from. `layer.pasteRemembersLayers {on?}` (a document option, `document.inspect` → `pasteRemembersLayers`)
pastes objects back into the layers they came from, by name, making missing ones.
pastes objects back into the layers they came from, by name, making missing ones. Drawing modes (`view.drawMode`) apply
too: in Draw Inside, `edit.paste`, `edit.pasteInPlace` and `edit.pasteOnAllArtboards` put the objects inside the
object drawn into (its clip group, made on the first paste), whatever Paste Remembers Layers says; in Draw Behind,
`edit.pasteInPlace` and `edit.pasteOnAllArtboards` put them just below the selection. `edit.pasteInFront` and
`edit.pasteInBack` ignore the drawing mode.
Artboards copy with their art. `artboard.copy {index? | indices?, art?}` puts artboards on the clipboard together
with the art fully inside each (`index` and `indices` default to the artboards the Artboard tool has selected; `art`
+3 -2
View File
@@ -1,6 +1,6 @@
# Parity with Adobe Illustrator
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-10-23 · **Change:** minor (Artboard Options: Show Center Mark and Show Cross Hairs (`artboard.setProps`/`artboard.new` `showCenterMark`, `showCrossHairs`) draw a center cross and lines from the middle of each side through the center on the canvas only, in one undo step; video safe areas, video rulers and the pixel aspect ratio remain missing; G2: the Effect Gallery shipped (#2883): Effect › Effect Gallery… browses the Artistic, Brush Strokes, Distort, Sketch, Stylize and Texture filters, edits each filter's settings, builds an ordered stack (add, reorder, hide, remove) with a live canvas preview, and OK applies it as separate appearance effects in one undo step; remaining: filter thumbnails and a preview area inside the dialog; G2 estimate 4–6 → 1–2 h; Raster effects 82% → 85% (power-user view 49% → 52%), estimated, a modest move because the named missing dialog landed without thumbnails or an in-dialog preview; previously: colour emoji fonts with bitmap glyphs (`sbix`: Apple Color Emoji; `CBDT`: Noto Color Emoji) draw on the canvas and export: PDF Type 3 glyphs or images, SVG images with outlined text, EPS and legacy `.ai` images, Create Outlines images, see [type-parity.md](type-parity.md); scores unchanged; imported PDF type keeps a word space between two sizes (#3623); G13: gradient Dither (Illustrator 30.0): a Dither box in the Gradient panel (`paint.editGradient`/`paint.setFill` `dither`, saved in the native file) draws a linear or radial gradient fill with seeded fine noise that hides banding, on the canvas and in raster exports; SVG and PDF exports write the fill as an image at the Document Raster Effects resolution, as the public documentation describes dither; fills only, as documented; score and hours unchanged; #3546: `--automation-read-root` and `--automation-write-root` may each be given more than once (`vectorcraft-cli mcp` and the desktop app); a path inside any root of its kind is allowed, every confinement check unchanged. Scores and estimates unchanged; #3147: `vectorcraft-cli run --commands FILE` (or `-`) reads the steps from a JSON file or standard input (an array or JSON Lines, at most 64 MiB and 100,000 steps), among `--cmd` and `--export` in order; errors name the step. Scores and estimates unchanged; G2: Effect › Sketch › Conté Crayon (Foreground Level, Background Level, Texture, Scaling, Relief, Light Direction, Invert; a black crayon in the dark areas and a white one in the light areas on textured mid-grey paper; ranges and defaults unverified VectorCraft choices); measured Photoshop-style filters 57/57, the Effect Gallery remains (4–6 h); Affinity import AF.5: master pages, tables, paragraph formats, shadows, glows, outlines, overlays and embedded documents; Recolor Artwork Edit chips scroll within the available screen height (#3416); small palettes retain their tab height; scores and estimates unchanged; #3515: recent-font groups in font pickers; PDF/X-1a and PDF/X-3 flattening keeps a CMYK document's inks where it rasterizes, #2160; Blend panel Type and Ramp control step easing with a separate color Shift (#2539); Blend Options retains spacing and orientation; polynomial curves are original approximation; UI chrome: panels dock into any dock group or the icon column by dragging (UI.6), workspaces keep their layout changes (UI.7), dock groups collapse to their tabs by a double-click (UI.8); scores and hours unchanged; Shape Builder Gap Detection shares Live Paint’s spatial gap finder and temporary merge bridges (#2526); Custom is capped at 72 pt in the existing options dialog; Recolor model selection is available through the engine and MCP only (#2520); the dialog retains its existing controls; filter plug-ins read and set effect records and stroke joins, caps and miter limits, G17; the Print dialog's Media list has the Japanese papers: JIS B4 257 × 364 mm, JIS B5 182 × 257 mm and JIS B6 beside the ISO B4/B5, which keep their ISO 216 sizes, and はがき, 往復はがき, 封筒 長形3号/長形4号/角形2号/角形3号 and 四六判; a paper is named by its JSON id or its dialog label, any case and spacing; imported PDF type that is letter-spaced keeps its word spaces and no others; Fractional Widths: Character panel menu, per type object, on by default; System Layout remains a panel stub; scores unchanged; G4: manual Tate-chu-yoko; G4: No Break; scores unchanged; the selection tools take a clipping path on its outline, G1; Polygon and Star exact-size placement remembers the chosen count for later drags and dialog openings; Cancel preserves the previous count; Live trace result bounds and selection highlights exclude the retained bitmap except in source-image views; CSS swatch libraries retain fractional gradient stop positions; scores and hours unchanged; live-effect plug-ins given their object's fills and strokes and the item they sit on, G17; plug-in parameters: labels, units, groups, helpLine truncated
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-10-23 · **Change:** minor (Fix #3705 in part: drawing modes apply to pastes (Draw Inside puts Paste, Paste in Place and Paste on All Artboards inside the object drawn into; Draw Behind puts Paste in Place and Paste on All Artboards behind the selection), and Shift+D goes from Draw Behind back to Draw Normal when Draw Inside can't draw into the selection instead of stopping at Draw Behind; G2: the Effect Gallery shipped (#2883): Effect › Effect Gallery… browses the Artistic, Brush Strokes, Distort, Sketch, Stylize and Texture filters, edits each filter's settings, builds an ordered stack (add, reorder, hide, remove) with a live canvas preview, and OK applies it as separate appearance effects in one undo step; remaining: filter thumbnails and a preview area inside the dialog; G2 estimate 4–6 → 1–2 h; Raster effects 82% → 85% (power-user view 49% → 52%), estimated, a modest move because the named missing dialog landed without thumbnails or an in-dialog preview; previously: colour emoji fonts with bitmap glyphs (`sbix`: Apple Color Emoji; `CBDT`: Noto Color Emoji) draw on the canvas and export: PDF Type 3 glyphs or images, SVG images with outlined text, EPS and legacy `.ai` images, Create Outlines images, see [type-parity.md](type-parity.md); scores unchanged; imported PDF type keeps a word space between two sizes (#3623); G13: gradient Dither (Illustrator 30.0): a Dither box in the Gradient panel (`paint.editGradient`/`paint.setFill` `dither`, saved in the native file) draws a linear or radial gradient fill with seeded fine noise that hides banding, on the canvas and in raster exports; SVG and PDF exports write the fill as an image at the Document Raster Effects resolution, as the public documentation describes dither; fills only, as documented; score and hours unchanged; #3546: `--automation-read-root` and `--automation-write-root` may each be given more than once (`vectorcraft-cli mcp` and the desktop app); a path inside any root of its kind is allowed, every confinement check unchanged. Scores and estimates unchanged; #3147: `vectorcraft-cli run --commands FILE` (or `-`) reads the steps from a JSON file or standard input (an array or JSON Lines, at most 64 MiB and 100,000 steps), among `--cmd` and `--export` in order; errors name the step. Scores and estimates unchanged; G2: Effect › Sketch › Conté Crayon (Foreground Level, Background Level, Texture, Scaling, Relief, Light Direction, Invert; a black crayon in the dark areas and a white one in the light areas on textured mid-grey paper; ranges and defaults unverified VectorCraft choices); measured Photoshop-style filters 57/57, the Effect Gallery remains (4–6 h); Affinity import AF.5: master pages, tables, paragraph formats, shadows, glows, outlines, overlays and embedded documents; Recolor Artwork Edit chips scroll within the available screen height (#3416); small palettes retain their tab height; scores and estimates unchanged; #3515: recent-font groups in font pickers; PDF/X-1a and PDF/X-3 flattening keeps a CMYK document's inks where it rasterizes, #2160; Blend panel Type and Ramp control step easing with a separate color Shift (#2539); Blend Options retains spacing and orientation; polynomial curves are original approximation; UI chrome: panels dock into any dock group or the icon column by dragging (UI.6), workspaces keep their layout changes (UI.7), dock groups collapse to their tabs by a double-click (UI.8); scores and hours unchanged; Shape Builder Gap Detection shares Live Paint’s spatial gap finder and temporary merge bridges (#2526); Custom is capped at 72 pt in the existing options dialog; Recolor model selection is available through the engine and MCP only (#2520); the dialog retains its existing controls; filter plug-ins read and set effect records and stroke joins, caps and miter limits, G17; the Print dialog's Media list has the Japanese papers: JIS B4 257 × 364 mm, JIS B5 182 × 257 mm and JIS B6 beside the ISO B4/B5, which keep their ISO 216 sizes, and はがき, 往復はがき, 封筒 長形3号/長形4号/角形2号/角形3号 and 四六判; a paper is named by its JSON id or its dialog label, any case and spacing; imported PDF type that is letter-spaced keeps its word spaces and no others; Fractional Widths: Character panel menu, per type object, on by default; System Layout remains a panel stub; scores unchanged; G4: manual Tate-chu-yoko; G4: No Break; scores unchanged; the selection tools take a clipping path on its outline, G1; Polygon and Star exact-size placement remembers the chosen count for later drags and dialog openings; Cancel preserves the previous count; Live trace result bounds and selection highlights exclude the retained bitmap except in source-image views; CSS swatch libraries retain fractional gradient stop positions; scores and hours unchanged; live-effect plug-ins given their object's fills and strokes and the item they sit on, G17; Line truncated
## Feature submission evidence
@@ -621,7 +621,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
- **Compound paths:** Make keeps the backmost object's appearance and each contour; selecting a member in Direct Selection reads and changes the compound's fill rule in Attributes. Direction remains a per-member edit. Rendered holes, unchanged contour geometry, no-op history and Undo/Redo are covered by `engine/tests/compound_attributes.rs` (#1197). Behaviour reference: [public compound-path documentation](https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/create-compound-paths.html). Make Compound Path on a group (such as outlined type) keeps the paint of its backmost path instead of drawing nothing, and compound paths joined into one keep their holes (#1537).
- **Saved selections:** Select ▸ Save Selection… asks for a name and keeps the selection in the document (saved with the file, undoable, up to 25); each one is listed at the bottom of the Select menu and a click selects its objects again; Edit Selection… lists them to rename or delete, applied together on OK. A file's saved selections are capped and checked against its objects when it opens.
Select ▸ Update Selection replaces the objects of the saved selection last recalled with the selected objects, in one undo step that marks the document changed (`select.update`). After Edit Selection… renames that saved selection, Update Selection replaces it under the new name; after Edit Selection… deletes it, Update Selection is disabled until another saved selection is recalled or the delete is undone. Undo and Redo do not change which saved selection is recalled.
- **Drawing modes:** in Draw Inside, a double-click with a selection tool outside the object being drawn into sets the drawing mode to Draw Normal, as Shift+D does.
- **Drawing modes:** in Draw Inside, a double-click with a selection tool outside the object being drawn into sets the drawing mode to Draw Normal, as Shift+D does. Pastes follow the drawing mode ([drawing modes](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/learn-drawing-basics/drawing-modes-overview.html)) (#3705): in Draw Inside, Paste, Paste in Place and Paste on All Artboards put the copies inside the object drawn into, in one undo step, Paste Remembers Layers aside; in Draw Behind, Paste in Place and Paste on All Artboards put them just below the selection; Paste in Front and Paste in Back ignore the mode. Shift+D cycles Draw Normal → Draw Behind → Draw Inside → Draw Normal, skipping Draw Inside unless one path, compound path or type is selected.
- **Drawing:** Pen, Curvature, anchor tools, Pencil, Paintbrush, Blob Brush, Smooth, Path Eraser, Join. Direction handles dragged with Direct Selection or the Anchor Point tool snap to smart guides, and Shift keeps them at 45° steps from their anchor. The Pen continues any open path from the end clicked, and while drawing, a click on an end of another open path joins the two into one (#776). The Curvature tool edits any selected path, whatever drew it, keeping its shape except where edited (#798): a click on a point makes it current and a drag moves it, re-curving only its two segments; Alt-click or double-click toggles it smooth or corner and Delete removes it; a click on a segment adds a point without changing the shape; with an end of an open path current, clicks go on from it and its other end closes it (`path.curvatureEdit`). Every point a drawing tool places snaps to Smart Guides through one snapper (#506): the Pen's and Curvature tool's anchors, the Pencil's ends, the shape tools' start and dragged corner or radius (Rectangle, Rounded Rectangle, Ellipse, Polygon, Star, Line Segment, Arc, Spiral, the grids), the Type tool's click and frame, a new artboard's corners. A filled Pencil path keeps a stroke of None (#1804, part of #1679). The [ and ] keys reach the Blob Brush, the Eraser and the Symbolism tools in the app (#1734, part of #1661).
With the Blob Brush, Shift held during a drag keeps the stroke on the horizontal or vertical line through the press point, whichever is nearer to the pointer (90° steps from the Constrain Angle preference), and the points dragged since Shift went down move to the other line when the pointer crosses to it; the points dragged while Shift is up follow the pointer.
Curvature point markers are circular, with no direction handles. While drawing, its own point feedback replaces generic selection markers; existing paths use the selection overlay, including partial selections and Hide Edges. Anchor Size applies, and Direct Selection and Pen retain their handles. The real egui-frame regressions in `crates/ui-egui/src/canvas.rs` verify marker positions, counts and unchanged documents (#1236, in part); the existing-path interpolation request remains open. The curve through the points (`curvature_spline` in `crates/tools/src/draw2.rs`) makes each stretch of three points follow the circle through them: a smooth point's handles lie along that circle's tangent, each `chord / (3 cos²(α/2))` long (α between handle and chord, capped at 90°), and the ends of an open path mirror their neighbour's tangent in their chord, so a J or a U curves evenly, a turn tighter than 30° comes to a point, and uneven spacing doesn't loop; the rubber band, a dragged or inserted point and `path.convertAnchor` to smooth use the same rule, while the Pencil's fitting keeps its own; `tests_draw2.rs` checks that the rubber band is the path the click makes (#1236, in part). The Smooth tool smooths only the stretch of path under the drag (#1547, fixes #1512).
@@ -1066,6 +1066,7 @@ applies to fills). Tests: `color::gradient::tests` (perceptual midpoint, expansi
| 2026-10-22 | minor | Live vector effects: the Transform effect has Transform Objects, Transform Patterns and Scale Strokes & Effects, its checkboxes visible (#885); the area row now lists only the options on a fill's or stroke's own Transform effect. Score and hours unchanged (estimated). |
| 2026-10-23 | minor | COLR colour fonts (v0 and v1) draw and export as vector art; evidence added; scores unchanged. |
| 2026-10-18 | minor | Shape Builder on art of thousands of segments (traced outlines, type outlines): lines cut it again past 4,096 segments, where the planar map used to give up and the tool offered whole shapes (#937's reproduced case; the planar map's edge-source and face lookups were quadratic in the segments, now indexed, and the cap is 65,536); Path operations stays 80% and Shape Builder 70% until confirmed on the reporter's file (estimated) |
| 2026-10-23 | minor | Fix #3705 in part: drawing modes apply to pastes (Draw Inside puts Paste, Paste in Place and Paste on All Artboards inside the object drawn into; Draw Behind puts Paste in Place and Paste on All Artboards behind the selection), and Shift+D goes from Draw Behind back to Draw Normal when Draw Inside can't draw into the selection instead of stopping at Draw Behind; scores and estimates unchanged. |
| 2026-10-23 | minor | Artboard Options: Show Center Mark and Show Cross Hairs (`artboard.setProps`/`artboard.new` `showCenterMark`, `showCrossHairs`) draw a center cross and lines from the middle of each side through the center on the canvas only, in one undo step; video safe areas, video rulers and the pixel aspect ratio remain missing; scores and estimates unchanged. |
| 2026-10-23 | minor | Path operations: Simplify: Object › Path › Simplify opens its slider at the Auto-Simplify level for the selection, previewing that result, instead of at 1 pt; partial-path simplify remains missing; score and hours unchanged (estimated). |
| 2026-10-22 | minor | Colour and gradients: Illustrator 30.0's gradient Method, Classic or Perceptual (Gradient panel menu, canvas and raster exports, SVG/PDF as images at the raster effects resolution, native file); score and hours unchanged (estimated). |
+4 -1
View File
@@ -1,6 +1,6 @@
# UI and interaction parity
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-10-23 · **Change:** minor (Artboard Options: Show Center Mark and Show Cross Hairs (`artboard.setProps`/`artboard.new` `showCenterMark`, `showCrossHairs`) draw a center cross and lines from the middle of each side through the center on the canvas only, in one undo step; video safe areas, video rulers and the pixel aspect ratio remain missing; Tangent and straight-segment perpendicular snapping use saved Smart Guides Geometric Guides preferences and Control bar quick access (#2537); no View submenu; G13: gradient Method (Illustrator 30.0): a Method menu in the Gradient panel, Classic or Perceptual (`paint.editGradient`/`paint.setFill` `method`, saved in the native file only when Perceptual, so older files open as Classic); Perceptual mixes a linear or radial gradient's colours in OKLab, on the canvas and in raster exports, and SVG and PDF exports write it as an image at the Document Raster Effects resolution, as the public documentation describes; Classic draws as before; a dithered Perceptual fill takes dither's noise; score and hours unchanged; G13: gradient Dither (Illustrator 30.0): a Dither box in the Gradient panel (`paint.editGradient`/`paint.setFill` `dither`, saved in the native file) draws a linear or radial gradient fill with seeded fine noise that hides banding, on the canvas and in raster exports; SVG and PDF exports write the fill as an image at the Document Raster Effects resolution, as the public documentation describes dither; fills only, as documented; score and hours unchanged; Recolor Artwork Edit chips scroll within the available screen height (#3416); small palettes retain their tab height; scores and estimates unchanged; Blend panel Type and Ramp control step easing with a separate color Shift (#2539); Blend Options retains spacing and orientation; polynomial curves are original approximations; Panels dock into any dock group or the icon column by dragging (UI.6), workspaces keep their layout changes (UI.7), dock groups collapse to their tabs by a double-click (UI.8); scores unchanged; Shape Builder Gap Detection shares Live Paint’s spatial gap finder and temporary merge bridges (#2526); Custom is capped at 72 pt in the existing options dialog; 3D: original Standard, Diffuse, Top Left and Right lighting presets; command access, effective-setting recognition and preview/history; scores and estimates unchanged; one selected clip group's Properties panel has Edit Clipping Path and Edit Contents at its top, G1; Distribute Objects and Distribute Spacing space from a key guide (#3165) with the Distribute Spacing value; Distribute spaces selected ruler guides with the objects, #1597 in part; the selection tools take a clipping path on its outline, over the art it clips; Polygon and Star exact-size placement remembers the chosen count for later drags and dialog openings; Cancel preserves the previous count; Live trace result bounds and selection highlights exclude the retained bitmap except in source-image views; a ruler guide can be the key object Align aligns to, and selected guides align to a key object, #2143; Pencil: Alt key toggles to Smooth Tool, #2001; status-readout sample widths cached by language, document unit and pixels per point; status messages and readouts use stable responsive allocations sized for localized labels and ordinary coordinates; cached canvas dimensions match the renderer limit before cache-key creation, view construction and worker submission; cached canvas reprojection preserves scale during resize, rotation and DPI changes; on-canvas Mirror Repeat axis, #2877; Background Export progress dialog with Cancel, #2564; 3D lighting: one to ten colored lights, smooth colored Inflate, legacy white-light appearance preserved; surface batching and restored seam minimum; scores and estimates unchanged; Blend spine Anchor Point conversions, selection/stacking priority and Shift regression coverage (#2544); scores and hours unchanged; Artboard Options' X and Y with a reference point, #1876; scores unchanged; library panels: one per library, dockable and tabbable, with Persistent, #2603; the Selection tool threads text from the out port, #2572 in part; scores unchanged; Group Selection picks and moves one path of a compound path, #2441 in part; the Move dialog opens on the last move and its last checkboxes; scores unchanged; transparency grid visibility saved in native documents, #1968; Live Corners radius up to the neighbouring cuts, #2332; Image Trace quick presets: wording corrected to the shipped behaviour, the Image Trace button opens the controls; batch exporting, #1935; document window scroll bars, #2322; Anchor Point tool: a click on a handle end retracts that handle only, #2267; scores unchanged; Smart Guides: the dragged end of a straight segment keeps to its extension at any angle, #2120; Warp Options controls verified by focused checks and original-image review; estimates unchanged; existing-guide EscapeLine truncated
> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-10-23 · **Change:** minor (Fix #3705 in part: drawing modes apply to pastes (Draw Inside puts Paste, Paste in Place and Paste on All Artboards inside the object drawn into; Draw Behind puts Paste in Place and Paste on All Artboards behind the selection), and Shift+D goes from Draw Behind back to Draw Normal when Draw Inside can't draw into the selection instead of stopping at Draw Behind; Tangent and straight-segment perpendicular snapping use saved Smart Guides Geometric Guides preferences and Control bar quick access (#2537); no View submenu; G13: gradient Method (Illustrator 30.0): a Method menu in the Gradient panel, Classic or Perceptual (`paint.editGradient`/`paint.setFill` `method`, saved in the native file only when Perceptual, so older files open as Classic); Perceptual mixes a linear or radial gradient's colours in OKLab, on the canvas and in raster exports, and SVG and PDF exports write it as an image at the Document Raster Effects resolution, as the public documentation describes; Classic draws as before; a dithered Perceptual fill takes dither's noise; score and hours unchanged; G13: gradient Dither (Illustrator 30.0): a Dither box in the Gradient panel (`paint.editGradient`/`paint.setFill` `dither`, saved in the native file) draws a linear or radial gradient fill with seeded fine noise that hides banding, on the canvas and in raster exports; SVG and PDF exports write the fill as an image at the Document Raster Effects resolution, as the public documentation describes dither; fills only, as documented; score and hours unchanged; Recolor Artwork Edit chips scroll within the available screen height (#3416); small palettes retain their tab height; scores and estimates unchanged; Blend panel Type and Ramp control step easing with a separate color Shift (#2539); Blend Options retains spacing and orientation; polynomial curves are original approximations; Panels dock into any dock group or the icon column by dragging (UI.6), workspaces keep their layout changes (UI.7), dock groups collapse to their tabs by a double-click (UI.8); scores unchanged; Shape Builder Gap Detection shares Live Paint’s spatial gap finder and temporary merge bridges (#2526); Custom is capped at 72 pt in the existing options dialog; 3D: original Standard, Diffuse, Top Left and Right lighting presets; command access, effective-setting recognition and preview/history; scores and estimates unchanged; one selected clip group's Properties panel has Edit Clipping Path and Edit Contents at its top, G1; Distribute Objects and Distribute Spacing space from a key guide (#3165) with the Distribute Spacing value; Distribute spaces selected ruler guides with the objects, #1597 in part; the selection tools take a clipping path on its outline, over the art it clips; Polygon and Star exact-size placement remembers the chosen count for later drags and dialog openings; Cancel preserves the previous count; Live trace result bounds and selection highlights exclude the retained bitmap except in source-image views; a ruler guide can be the key object Align aligns to, and selected guides align to a key object, #2143; Pencil: Alt key toggles to Smooth Tool, #2001; status-readout sample widths cached by language, document unit and pixels per point; status messages and readouts use stable responsive allocations sized for localized labels and ordinary coordinates; cached canvas dimensions match the renderer limit before cache-key creation, view construction and worker submission; cached canvas reprojection preserves scale during resize, rotation and DPI changes; on-canvas Mirror Repeat axis, #2877; Background Export progress dialog with Cancel, #2564; 3D lighting: one to ten colored lights, smooth colored Inflate, legacy white-light appearance preserved; surface batching and restored seam minimum; scores and estimates unchanged; Blend spine Anchor Point conversions, selection/stacking priority and Shift regression coverage (#2544); scores and hours unchanged; Artboard Options' X and Y with a reference point, #1876; scores unchanged; library panels: one per library, dockable and tabbable, with Persistent, #2603; the Selection tool threads text from the out port, #2572 in part; scores unchanged; Group Selection picks and moves one path of a compound path, #2441 in part; the Move dialog opens on the last move and its last checkboxes; scores unchanged; transparency grid visibility saved in native documents, #1968; Live Corners radius up to the neighbouring cuts, #2332; Image Trace quick presets: wording corrected to the shipped behaviour, the Image Trace button opens the controls; batch exporting, #1935; document window scroll bars, #2322; Anchor Point tool: a click on a handle end retracts that handle only, #2267; scores unchanged; Smart Guides: the dragged end of a straight segment keeps to its extension at any angle, #2120; Warp Options controls verified by focused checks and original-image revLine truncated
## Feature submission evidence
@@ -96,6 +96,8 @@ tools, never checked side by side) isn't captured row by row.
| Join tool scrubbing, Average, Join | done | Join merges the direct-selected anchors lying on one another along a path, as after Average, into one (#1533) |
| Average and Join in one step, with a corner or smooth choice for the joined anchor | partial | `path.join` accepts `to: corner|smooth` on the merged anchor; Average and Join are still separate commands; [gap 1](gaps.md) |
| Smooth tool smooths only the stretch of path under the drag | done | #1512 |
| Drawing modes apply to pastes: Draw Inside takes Paste, Paste in Place and Paste on All Artboards inside the object; Draw Behind puts Paste in Place and Paste on All Artboards behind the selection; Shift+D cycles past Draw Behind with any selection ([drawing modes](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/learn-drawing-basics/drawing-modes-overview.html)) | done | #3705; `pasting_in_draw_inside_puts_the_copies_inside_the_object`, `paste_in_place_in_draw_behind_goes_behind_the_selection`, `shift_d_goes_past_draw_behind_whatever_is_selected` |
| Simplify (slider, auto, corner angle threshold) | partial | Tolerance, default-on Preview and original/new point counts (#1272); Corner Point Angle Threshold, Convert to Straight Lines and Show Original Path; the slider under the selection with Auto-Simplify and More Options, and the dialog's option to open it directly with its last settings; the slider opens at 1 pt rather than at the Auto-Simplify level, and simplifying only a Direct Selection part of a path remains missing |
| Simplify (slider, auto, corner angle threshold) | partial | Tolerance, default-on Preview and original/new point counts (#1272); Corner Point Angle Threshold, Convert to Straight Lines and Show Original Path; the slider under the selection with Auto-Simplify and More Options, opening at the Auto-Simplify level for the selection with that result previewed, and the dialog's option to open it directly with its last settings; simplifying only a Direct Selection part of a path remains missing |
## Direct Selection, anchors and handles
@@ -335,6 +337,7 @@ separate. Scores and hours unchanged. [Behavior and command details](development
| 2026-10-23 | minor | Preferences › General › Constrain Angle: arrow keys, Shift drags and new rectangles, ellipses, grids, type, polygons, stars and size-dialog shapes follow it (#394). Scores and estimates unchanged. |
| 2026-10-22 | minor | Pen, Anchor Point and Direct Selection drags: the preview gets every pointer position, including where it re-enters the window and the move in the release's frame (#834); score unchanged (estimated) |
| 2026-10-23 | minor | Guides: a path moved by a press on its stroke or beside its edge, and a straight segment Direct Selection drags, snap by the nearest point of the path, landing exactly on a ruler guide (#3701); scores and estimates unchanged. |
| 2026-10-23 | minor | Fix #3705 in part: drawing modes apply to pastes (Draw Inside puts Paste, Paste in Place and Paste on All Artboards inside the object drawn into; Draw Behind puts Paste in Place and Paste on All Artboards behind the selection), and Shift+D goes from Draw Behind back to Draw Normal when Draw Inside can't draw into the selection instead of stopping at Draw Behind; scores and estimates unchanged. |
| 2026-10-23 | minor | Artboard Options: Show Center Mark and Show Cross Hairs (`artboard.setProps`/`artboard.new` `showCenterMark`, `showCrossHairs`) draw a center cross and lines from the middle of each side through the center on the canvas only, in one undo step; video safe areas, video rulers and the pixel aspect ratio remain missing; scores and estimates unchanged. |
| 2026-10-23 | minor | Simplify: Object › Path › Simplify opens its slider at the Auto-Simplify level for the selection, previewing that result, instead of at 1 pt; partial-path simplify remains missing; scores and estimates unchanged. |
| 2026-10-22 | minor | Gradient panel: the Method menu, Classic or Perceptual (Illustrator 30.0); scores and estimates unchanged. |